D2862. Engine description. heavy duty

Size: px
Start display at page:

Download "D2862. Engine description. heavy duty"

Transcription

1 heavy duty D2862 Engine description Characteristics ncylinders and arrangement: 12 cylinders in V arrangement noperation mode: 4-stroke diesel engine, watercooled nturbocharging: Turbocharger charge air intercooler and waste gate nnumber of valves: 4 valves per cylinder nfuel system: Common Rail direct fuel injection with electronic control nengine block: High-strength casting with integrated oil and water ducts and replaceable cylinder liners nengine lubrication: Closed system with forced feeding, oil cooling and filtering ntype of cooling: Plate heat exchanger seawater cooled nengine control: Electronic injection control (EDC) Electronic engine monitoring including diagnostic unit nfuel: DIN EN 59 naverage TBO: 18, operating hours noil change interval: 6 operating hours 43

2 Technical data Technical features D2862 Type designation LE 431 LE 434 Displacement l Nominal rating 1) (hp) 551 (749) 551 (749) Rated speed 1,8 1,8 at rated speed 2,923 2,923 Maximum torque 3,35 3,35 at speed 1, 1,6 1, 1,6 2) g/h Fuel consumption 2) l / h Classifiable Exhaust gas status IMO Tier 2, 1) The rating is according to DIN 346 /1 2) Consumption at rated power IMO Tier 2, EPA Tier 3, Dimensions D2862 Type designation LE 431 / 434 A-Overall width mm 1,27 B-Overall length mm 2,23 C-Overall height mm 1,28 D-Top of engine to crankshaft centre mm 815 E-Length of engine from front end to edge of flywheel housing mm 1,614 Average weight of engine ready for installation (dry) kg 2,27 For detailed examinations of installation dimensions, please order drawings from our factory. 44

3 charts D2862 LE 431 D2862 LE ,15 7 3,15 heavy duty 6 2,7 6 2,7 5 2,25 5 2,25 4 1,8 4 1,8 3 1,35 3 1, , 1,15 1,3 1,45 1,6 1, , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 45

4 Technical data Technical features D2862 Type designation LE 421 LE 424 Displacement l Nominal rating 1) (hp) 662 (9) 662 (9) Rated speed 1,8 1,8 at rated speed 3,512 3,512 Maximum torque 3,955 3,95 at speed 1, 1,6 1,1 1,6 2) g/h Fuel consumption 2) l / h Classifiable Exhaust gas status IMO Tier 2, 1) The rating is according to DIN 346 /1 2) Consumption at rated power IMO Tier 2, EPA Tier 3, Dimensions D2862 Type designation LE 421 / 424 A-Overall width mm 1,27 B-Overall length mm 2,23 C-Overall height mm 1,28 D-Top of engine to crankshaft centre mm 815 E-Length of engine from front end to edge of flywheel housing mm 1,614 Average weight of engine ready for installation (dry) kg 2,27 For detailed examinations of installation dimensions, please order drawings from our factory. 46

5 charts D2862 LE 421 D2862 LE ,5 7 3,5 heavy duty 6 3, 6 3, 5 2,5 5 2,5 4 2, 4 2, 3 2 1,5 1, 3 2 1,5 1, , 1,15 1,3 1,45 1,6 1, , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 47

6 Technical data Technical features D2862 Type designation LE 441 LE 444 Displacement l Nominal rating 1) (hp) 735 (1,) 735 (1,) Rated speed 1,8 1,8 at rated speed 3,9 3,9 Maximum torque 4,38 4,38 at speed 1,1 1,6 1,1 1,6 2) g/h Fuel consumption 2) l / h Classifiable Exhaust gas status IMO Tier 2, 1) The rating is according to DIN 346 /1 2) Consumption at rated power IMO Tier 2, EPA Tier 3, Dimensions D2862 Type designation LE 441 / 444 A-Overall width mm 1,27 B-Overall length mm 2,23 C-Overall height mm 1,28 D-Top of engine to crankshaft centre mm 815 E-Length of engine from front end to edge of flywheel housing mm 1,614 Average weight of engine ready for installation (dry) kg 2,27 For detailed examinations of installation dimensions, please order drawings from our factory. 48

7 charts D2862 LE 441 D2862 LE ,2 7 4,2 heavy duty 6 5 3,6 3, 6 5 3,6 3, 4 2,4 4 2, ,8 1, ,8 1, , 1,15 1,3 1,45 1,6 1, , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 g/h , 1,15 1,3 1,45 1,6 1,8 49

Commercial. Marine. Marine. High speed propulsion engines. MAN Engines

Commercial. Marine. Marine. High speed propulsion engines. MAN Engines Marine Commercial Marine High speed propulsion engines MAN Engines Contents MAN Marine Engines Customer Benefits...4 Light, medium and heavy duty operation...4 MAN Service: Competent and motivated...5

More information

MARINE. High speed propulsion engines. MAN Engines

MARINE. High speed propulsion engines. MAN Engines MARINE High speed propulsion engines MAN Engines Contents MAN Marine Engines Customer Benefits...4 Light, medium and heavy duty operation...4 MAN Service: Competent and motivated...5 MAN Environmental

More information

MARINE. High speed engines for pleasure boats. MAN Engines

MARINE. High speed engines for pleasure boats. MAN Engines MARINE High speed engines for pleasure boats MAN Engines Pure pleasure Performance gives power its beauty: With powers ranging from 73 to 1,9 hp, MAN yacht engines are Europe s number one. MAN engines

More information

MARINE. High speed propulsion engines. MAN Engines

MARINE. High speed propulsion engines. MAN Engines MARINE High speed propulsion engines MAN Engines Contents MAN Marine Engines Customer Benefits...4 Light, medium and heavy duty operation...4 MAN Service: Competent and motivated...5 MAN Warranty: Relaxing

More information

MARINE. High speed engines for pleasure boats. MAN Engines

MARINE. High speed engines for pleasure boats. MAN Engines MARINE High speed engines for pleasure boats MAN Engines Pure pleasure Performance gives power its beauty: With powers ranging from 73 to 1,9 hp, MAN yacht engines are Europe s number one. MAN engines

More information

POWER. Diesel Engines for Power Generation. MAN Engines

POWER. Diesel Engines for Power Generation. MAN Engines POWER Diesel Engines for Power Generation MAN Engines 2 Contents MAN Diesel Engines for Power Generation Product Range... 5 Customer Benefits... 6 Types of Operation.... 6 Servicing Concept... 7 Description

More information

Power generation. Power. Power. Diesel Engines for Power Generation. MAN Engines

Power generation. Power. Power. Diesel Engines for Power Generation. MAN Engines Power Power generation Power Diesel Engines for Power Generation MAN Engines Neues Bild Power wherever needed. Contents MAN Diesel Engines for Power Generation Servicing Concept...4 Customer Benefits...4

More information

POWER. Gas Engines for Power Generation. MAN Engines

POWER. Gas Engines for Power Generation. MAN Engines POWER Gas Engines for Power Generation MAN Engines 2 Contents Efficient Electricity and Heat Generation Application Type and Product Range... 4 Customer Benefits... 5 Customized Service Reliability...

More information

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6 VOLVO PENTA INBOARD DIESEL D11-510 Technical Data Engine designation D11-510 No. of cylinders and configuration in-line 6 Method of operation 4-stroke, direct-injected, turbocharged diesel engine with

More information

POWER. Gas Engines for Power Generation. MAN Engines

POWER. Gas Engines for Power Generation. MAN Engines POWER Gas Engines for Power Generation MAN Engines 2 Contents Efficient Electricity and Heat Generation Application Type and Product Range... 4 Customer Benefits... 5 Customized Service Reliability...

More information

1013. The engine for construction.

1013. The engine for construction. 1013. The engine for construction. 63- kw at 1500-0 rpm Engines for exhaust emission step 2 These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line engines. Three separate

More information

C87 ENT 260 kw ( rpm rpm Stage IIIA / Tier 3

C87 ENT 260 kw ( rpm rpm Stage IIIA / Tier 3 C87 ENT 260 kw (354 HP) @ 2100 rpm - 1500 Nm @ 1400 rpm SPECIFICATIONS Technical code F2CE9687A*EXX Thermodynamic cycle Diesel 4 stroke Air intake TAA Arrangement 6L Bore x Stroke mm 117 x 135 Total displacement

More information

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6

D VOLVO PENTA INBOARD DIESEL. Technical Data. Engine designation D No. of cylinders and configuration in-line 6 VOLVO PENTA INBOARD DIESEL D13-7 Technical Data Engine designation D13-7 No. of cylinders and configuration in-line 6 Method of operation 4-stroke, direct-injected, turbocharged diesel engine with charge

More information

1012. The engine for construction equipment kw at min -1

1012. The engine for construction equipment kw at min -1 1012. The engine for construction equipment. 41-123 kw at 1500-2500 min -1... Engines with integrated cooling system These are the characteristics of the 1012: Modern water-cooled 4- and 6-cylinder in-line

More information

1013ec. The engine for construction equipment.

1013ec. The engine for construction equipment. 1013ec. The engine for construction equipment. 92-235 kw at 2000-2300 rpm Engines with conventional cooling system. These are the characteristics of the 1013ec: Modern water-cooled 4- and 6-cylinder in-line

More information

1013. The engine for construction equipment.

1013. The engine for construction equipment. 1013. The engine for construction equipment.... 63-190 kw at 1500-2300 min -1 Engines with integrated cooling system These are the characteristics of the 1013: Modern water-cooled 4- and 6-cylinder in-line

More information

1100 Series. Marine Propulsion Engine M250C and M300C. Powered by Your Needs

1100 Series. Marine Propulsion Engine M250C and M300C. Powered by Your Needs 1100 Series Marine Propulsion Engine M250C and M300C These are the latest addition to the common platform concept of 1100 Series diesel engines. Assembled on a new high technology production line, these

More information

Mercury Diesel 6.7 L. L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications

Mercury Diesel 6.7 L. L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications General Specifications Mercury Diesel 6.7 L L6 Common Rail, EPA Tier 3 / RCD 2 Engine for Recreational Applications

More information

Power. Gas engines for CHP units and gensets.

Power. Gas engines for CHP units and gensets. Power CHP Power. Gas engines for CHP units and gensets. MAN Engines A Division of MAN Truck & Bus Contents. Gas engines for cogenerating power stations................................. 3 Application type

More information

TNV Series Common Rail. Final Tier 4 19kW to 56kW WATER-COOLED DIESEL ENGINES. EPA Tier 4 (19-56kW) EU Stage IIIB (37-56kW)

TNV Series Common Rail. Final Tier 4 19kW to 56kW WATER-COOLED DIESEL ENGINES. EPA Tier 4 (19-56kW) EU Stage IIIB (37-56kW) Final Tier 4 19kW to 56kW WATER-COOLED DIESEL ENGINES TNV Series Common Rail EPA Tier 4 (19-56kW) EU Stage IIIB (37-56kW) TNV SERIES COMMON RAIL ENGINES EPA TIER 4 (19-56kW) EU Stage IIIB (37-56kW) * DPF

More information

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm

1100 Series M250C Marine Propulsion Engine 186 kw ( rpm These are the latest addition to the common platform concept of 1106 Series diesel engines. Assembled on a new high technology production line, these ultra clean engines will provide a superior replacement

More information

CURSOR Series. Marine application C87 ENT M38.10 C87 ENT M62.10

CURSOR Series. Marine application C87 ENT M38.10 C87 ENT M62.10 CURSOR Series Marine application C87 ENT M38.10 C87 ENT M62.10 C87 ENT M62.10 TECHNICAL AND REPAIR MANUAL OCTOBER 2010 EDITION OCTOBER 2010 C87 ENT M62.10 1.3 SECTION CONTENTS Section 1. OVERVIEW... 5

More information

The engine company. The Engine for Construction Equipment ,9 kw hp at rpm

The engine company. The Engine for Construction Equipment ,9 kw hp at rpm The engine company. The Engine for Construction Equipment. 23 74,9 kw 31 100 hp at 1600 2800 rpm Engine description Type of cooling: Crankcase: Crankcase breather: Cylinder head: Valve arrangement/ Timing:

More information

MTU Friedrichshafen 3B

MTU Friedrichshafen 3B Sheet 1 of 8 Printout: (yd) 200707 ENGINE DATA MTU Project No. No. Index Unit 18V2000G85TB Chargeair coolant teperature Rawwater inlet teperature 0 0. DATARELEVANT ENGINE DESIGN CONFIGURATION 1 Fuelconsuption

More information

D4-225/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data

D4-225/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data VOLVO PENTA AQUAMATIC DUOPROP D4-2/DP Technical Data Engine designation D4-2 A Crankshaft power, kw (hp) 16 (2) Propeller shaft power, kw (hp) 18 (21) Engine speed, rpm 3 Displacement, l (in 3 ) 3.7 (224)

More information

1104C-44TA Industrial Diesel Engine

1104C-44TA Industrial Diesel Engine Whatever your application, there's an 1104 engine for you. Part of the Perkins 1100 Series, the range's 4 cylinder, 4.4 litre engines are smooth and quiet in operation. Designed to meet EU Stage II/IIIA

More information

1104C-44TA Industrial Diesel Engine

1104C-44TA Industrial Diesel Engine Whatever your application, there s an 1104 engine for you. Part of the Perkins 1100 Series, the range s 4 cylinder, 4.4 litre engines are smooth and quiet in operation. Designed to meet EU Stage II/IIIA

More information

D6-330/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data

D6-330/DP VOLVO PENTA AQUAMATIC DUOPROP. Technical Data VOLVO PENTA AQUAMATIC DUOPROP D6-33/DP Technical Data Engine designation D6-33 A Crankshaft power, kw (hp) 243 (33) Propeller shaft power, kw (hp) 233 (317) Engine speed, rpm 35 Displacement, l (in 3 )

More information

912. The Genset Engine.

912. The Genset Engine. 912. The Genset Engine. 29-64 kva at 1500/1800 min -1 rpm The engine with integrated cooling system. These are the characteristics of the 912 Gen: 3,4,6 cylinder naturally aspirated in-line engines. Displacement:

More information

2013. The engine for agricultural equipment kw at 2100 rpm

2013. The engine for agricultural equipment kw at 2100 rpm 2013. The engine for agricultural equipment. 81-118 kw at 2100 rpm... These are the characteristics of the 2013: Modern water-cooled 6-cylinder in-line engines. Turbocharging and turbocharging with charge

More information

3508 B Industrial Engine

3508 B Industrial Engine CAT ENGINE SPECIFICATIONS V-8, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 34.53 L (2,107.15 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1

More information

3516 B Industrial Engine

3516 B Industrial Engine CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.0 L (4,210.64 in 3 ) Aspiration...Turbocharged / SCAC Compression Ratio...14.0:1

More information

D 0834, D Euro4 vehicle diesel engines kw ( hp)

D 0834, D Euro4 vehicle diesel engines kw ( hp) D 0834, D 0836 Euro4 vehicle diesel engines 110 240 kw (150 326 hp) http://www.barringtondieselclub.co.za/ (all power outputs) Type Inline engine Number of cylinders D 0834: 4 D 0836: 6 Layout LFL and

More information

Diesel engine D 2866 LE20x Technical Data

Diesel engine D 2866 LE20x Technical Data page 1 Engine type: Cylinders : Aspiration : Cooling : Lubrication: Injection: Generator: Starter motor: four-stroke, direct-injection 6 cylinder in line, wet replaceable cylinder liners turbocharger,

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-134-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4JJ1 (Intercooler turbo) Model No. : AI-4JJ1XYBW-01 Customer EXPORT Application General power Drawing No. E3-1040-017-1 (

More information

MTU Friedrichshafen. MTU Project No. - ENGINE DATA - Printout: (y-m-d) Sheet 1

MTU Friedrichshafen. MTU Project No. - ENGINE DATA - Printout: (y-m-d) Sheet 1 Printout: (y-m-d) 2006-08-09 Sheet 1 0. DATA-RELEVANT ENGINE DESIGN CONFIGURATION 1 Fuel-consumption optimized X 2 Exhaust-emissions optimized (limit values see Exhaust Emissions, Chapter 21) 47 "TA-Luft"

More information

Technical Sales Document

Technical Sales Document 1/22 Product Data 10 Ref. 25 C/; Air charge air cooling TALuft optimized (Diesel); Reference conditions 6 Intake air temperature 25 C 7 Chargeair coolant temperature C 8 Barometric pressure 1000 mbar 9

More information

6 CYLINDERS IN LINE DIESEL CYCLE COMMON RAIL

6 CYLINDERS IN LINE DIESEL CYCLE COMMON RAIL USA NSERIES B C 6 CYLINDERS IN LINE DIESEL CYCLE COMMON RAIL N60 400 I N67 450 I N67 570 @3000 @3000 @3000 294 kw (400 HP) 272 kw (370 HP) 243 kw (330 HP) 199 kw (270 HP) B C 331 kw (450 HP) 309 kw (420

More information

Customer Information Pack

Customer Information Pack Doc No 7628-7-12 Customer Information Pack 1106 Series Marine Propulsion Engines All information in this document is substantially correct at time of printing and may be altered subsequently. Perkins

More information

Technical Sales Document

Technical Sales Document 1/23 Reference conditions 6 Intake air temperature 25 C 7 Chargeair coolant temperature C 8 Barometric pressure 1000 mbar 9 Site altitude above sea level 100 m 2/23 0. Datarelevant engine design configuration

More information

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm

C15 ACERT Industrial Engine Tier 3/Stage IIIA 328 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...18.0:1

More information

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm

C11 ACERT Industrial Engine Tier 3/Stage IIIA 242 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...140.0 mm (5.51 in) Displacement... 11.1 L (677.36 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.2:1

More information

C MARINE PROPULSION

C MARINE PROPULSION C175-16 MARINE PROPULSION 2721-2948 m (2683-2907 b) 2001-2168 b SPECIFICATIONS Image shown may not reflect actual engine configuration STANDARD ENGINE EQUIPMENT Air Inlet System Corrosion-resistant aftercooler

More information

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm

C13 ACERT Industrial Engine Tier 3/Stage IIIA 310 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...130.0 mm (5.12 in) Stroke...157.0 mm (6.18 in) Displacement... 12.5 L (762.8 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...17.3:1

More information

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C9 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.1:1

More information

CURSOR SERIES C78 ENS M20.10 C78 ENT M30.10 C78 ENT M50.11 C78 ENT M55.10

CURSOR SERIES C78 ENS M20.10 C78 ENT M30.10 C78 ENT M50.11 C78 ENT M55.10 CURSOR SERIES.10 C78 ENT M30.10 C78 ENT M50.11 C78 ENT M55.10 15 4 5 6 10 9 7 8 04_004_C .10 C78 ENT M30.10 C78 ENT M50.11 C78 ENT M55.10 Technical and Repair Manual JUNE 2007 EDITION T E C H N O L O G

More information

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2447 bhp) 1825 bkw 2482 mhp (2447 bhp) 1825 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 78.08 L (4,764.73 in 3 ) Rated Speed...1600 Bore... 170.0

More information

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw

3516B MARINE PROPULSION SPECIFICATIONS STANDARD ENGINE EQUIPMENT mhp (2200 bhp) 1641 bkw 2231 mhp (2200 bhp) 1641 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.06 L (4,214.3 in 3 ) Rated Speed...1800 Bore... 170.0

More information

The Construction Equipment Engine kw kw at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim

The Construction Equipment Engine kw kw at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim The Construction Equipment Engine 160 250 kw 214 335 kw at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim Starting January 2011, diesel engines of mobile construction machines with power classes

More information

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm

C15 ACERT Industrial Power Unit Tier 3/Stage IIIA 354 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...137.2 mm (5.4 in) Stroke...171.4 mm (6.75 in) Displacement... 15.2 L (927.56 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

Volkswagen Industrial Engines The advantages are crystal-clear - engine technology proven a million times over. All Volkswagen industrial engines are

Volkswagen Industrial Engines The advantages are crystal-clear - engine technology proven a million times over. All Volkswagen industrial engines are The new TDI 2.0 Industrial Engines The drive for your ideas. Volkswagen Industrial Engines The advantages are crystal-clear - engine technology proven a million times over. All Volkswagen industrial engines

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 429 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

Engine for Industrial Applications kw hp at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim

Engine for Industrial Applications kw hp at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim Engine for Industrial Applications 160-250 kw 214-335 hp at 2200 min -1 rpm EU Stage III B / US EPA Tier 4 interim Modern, water-cooled 6-cyclinder in-line engine Turbocharged with intercooler (air/air),

More information

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm

C9 ACERT Industrial Power Unit Tier 3/Stage IIIA 261 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...112.0 mm (4.41 in) Stroke...149.0 mm (5.87 in) Displacement... 8.8 L (537.01 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm

C18 ACERT Industrial Engine Tier 3/Stage IIIA 470 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in 3 ) Aspiration...Turbocharged Aftercooled Compression Ratio...16.3:1

More information

Technical Sales Documentation

Technical Sales Documentation Technical Sales Docuentation 12V1600G80S 2011712 Description: EPA Tier 2 Status: Current Application Group 3D No. Intake air teperature Chargeair coolant teperature Rawwater inlet teperature 0. DATARELEVANT

More information

C280-8 MARINE PROPULSION

C280-8 MARINE PROPULSION C280-8 MARINE PROPULSION 3084 bhp (2300 bkw) 900 rpm SPECIFICATIONS Shown with Accessory Equipment In-Line 8, 4-Stroke-Cycle-Diesel Emissions.................. IMO/EPA Tier 2 Compliant Bore mm (in)...

More information

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance INTERNATIONAL MARITIME ORGANIZATION (IMO) Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES Base Engine MR706L Cummins MerCruiser

More information

STEYR-MOTORS. Document Go to Page

STEYR-MOTORS. Document Go to Page STEYR-MOTORS Document Go to Page Chat with your boat 02 MO94K33-MO10K38 04 MO126K28 06 MO144M38-MO144V38 08 MO164M40 10 MO166K28 12 MO236K43 14 MO246K41 16 MO266K43 18 4Cyl Mercuriser bravo stern drive

More information

3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System

3516B SPECIFICATIONS. Lube System. gear type oil pump, gear type scavenge oil pump Dual Caterpillar A-III electronic engine control, Mounting System 2840 mhp (2800 bhp) 2088 bkw Image shown may not reflect actual SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... EPA T1-IMO Displacement... 69.0 L (4,210.64 in 3 ) Rated Speed...1880 Bore... 170.0

More information

3516B Offshore Generator Set

3516B Offshore Generator Set 3516B Offshore Generator Set 1285 ekw (1836 kva) 60 Hz (1200 rpm) Actual configuration may vary from displayed image CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle-Diesel Emissions... IMO Tier I Bore...

More information

1106C-70TA. Series. Industrial Open Power Unit. Tier rpm. Basic technical data. Ratings

1106C-70TA. Series. Industrial Open Power Unit. Tier rpm. Basic technical data. Ratings 1106C-70TA Tier 2 162 kw @ 2200 rpm Industrial Open Power Unit 1100 Series Basic technical data Number of cylinders...........................................................6 Cylinder arrangement....................................................

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L IDI (Mercury MerCruiser D4.2L Model) IMPORTANT: To comply with regulations

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D4.2L 230 (4.2 MS 230 and 4.2 MI 230 Model) IMPORTANT: To comply with regulations

More information

VOLVO PENTA GENSET ENGINE TAD531GE

VOLVO PENTA GENSET ENGINE TAD531GE VOLVO PENTA GENSET ENGINE TAD531GE 1500 rpm, 102 kw (139 hp) 1800 rpm 111 kw (151 hp) The TAD531GE is a powerful, reliable and economical Generating Set Diesel Engine. Durability & low noise Designed for

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-175-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : BH-6WG1X (Intercooler turbo) Model No. : BH-6WG1XYGV-01 Customer EXPORT Application Generator Drawing No. E9-1020-040-0 ( 3D

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-173-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : BH-6HK1X (Intercooler turbo) Model No. : BH-6HK1XYGV-02 Customer EXPORT Application Generator Drawing No. E3-1032-033-0 ( 3D

More information

The Construction Equipment Engine kw hp at 2100 min -1 rpm EU Stage III B / US EPA Tier 4 interim

The Construction Equipment Engine kw hp at 2100 min -1 rpm EU Stage III B / US EPA Tier 4 interim The Construction Equipment Engine 300 520 kw 402 697 hp at 2100 min -1 rpm EU Stage III B / US EPA Tier 4 interim Starting January 2011, diesel engines of mobile construction machines with power classes

More information

Yanmar type 4BY150 The Powerful Gem

Yanmar type 4BY150 The Powerful Gem Yanmar type 4BY15 The Powerful Gem Configuration Maximum output at crankshaft * Continuous rating output at crankshaft Displacement Bore x stroke Cylinders Combustion system Aspiration Starting system

More information

Bore and stroke 84 x 100 mm 3.3 x 3.9 in Displacement 2.2 litres 135 in 3

Bore and stroke 84 x 100 mm 3.3 x 3.9 in Displacement 2.2 litres 135 in 3 The Syncro 2.2 engine is the newest member of the highly successful Perkins 400 Series and has been designed to help our customers meet current emissions standards in North America. The engine is a 4-cylinder,,

More information

MTU Friedrichshafen 3B bar 19,96. bar 21,92

MTU Friedrichshafen 3B bar 19,96. bar 21,92 Sheet 1 of 8 Technical Sales Docuentation Printout: (yd) 0110719 ENGINE DATA MTU Project No. No. Index Unit 1V1600G10F Intake air teperature Chargeair coolant teperature Baroetric pressure Rawwater inlet

More information

GE Marine. Seaworthy power. GE s new L250 inline diesel engine. imagination at work

GE Marine. Seaworthy power. GE s new L250 inline diesel engine. imagination at work GE Marine Seaworthy power GE s new L250 inline diesel engine imagination at work GE s L250 Built by one of the world s largest manufacturers of medium-speed diesel engines Designed to save fuel and meet

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-153-0 (1/9) Rev. ENGINE SPECIFICATIONS 0 Engine Model Base Model : AH-6UZ1X (Intercooler turbo) Model No. : AH-6UZ1XYBW-01 Customer EXPORT Application General power Drawing No. E5-1020-005-1

More information

C32 ACERT MARINE PROPULSION

C32 ACERT MARINE PROPULSION 1470-1925 m (1450-1900 b) 1081-1417 b s for Pleasure Craft Applications C32 ACERT Heat Exchanger Cooled Image shown may not reflect actual engine SPECIFICATIONS V-12, 4-Stroke-Cycle-Diesel Emissions.................

More information

for Power Generation Standby Applications with air-to-air charge air cooling

for Power Generation Standby Applications with air-to-air charge air cooling Gendrive Series 2000 Gx6 for Power Generation Standby Applications with air-to-air charge air cooling Dimensions and Masses Engine Dimensions (LxWxH) mm (in) Mass, dry kg (lbs) 2V 2086 x 522 x 470 (82

More information

Technical data TAD620VE

Technical data TAD620VE General In-line four stroke diesel engine with direct injection. Rotation direction, anti-clockwise viewed towards flywheel Number of cylinders 6 Displacement, total Firing order s in 3 5,7 348 1-5-3-6-2-4

More information

MTU Friedrichshafen 3D bar - bar 24,15

MTU Friedrichshafen 3D bar - bar 24,15 Sheet of 8 Technical Sales Docuentation Printout: (yd) 20079 ENGINE DATA MTU Project No. No. Index Unit 2V600G80F Intake air teperature Chargeair coolant teperature Baroetric pressure Rawwater inlet teperature

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-137-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4JJ1 (Turbocharger) Model No. : AJ-4JJ1TYBW-02 Customer EXPORT Application General power Drawing No. E3-1040-022-0 ( 3D Data

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-171-0 (1/9) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : 4HK1X (Intercooler turbo) Model No. : BI-4HK1XYGV-02 Customer EXPORT Application Generator Drawing No. E4-1033-024-0 ( 3D Data

More information

Volvo High-performance, lowemission

Volvo High-performance, lowemission VOLVO ARTICULATED HAULER A35C6X6 Engine output SAE J1349: Net 262 kw 351 hp Gross 267 kw 358 hp Body volume: 19 m 3 25 yd 3 Load capacity: 32 t 35 sh ton Volvo High-performance, lowemission direct-injected,

More information

4000 Series TRS1 Spark Ignited Gas Engine rpm

4000 Series TRS1 Spark Ignited Gas Engine rpm Designed to meet the future demands of the market for clean, efficient gas fuelled engines for the power generation industry, the Perkins 4016-61TRS 16-cylinder spark ignition gas engine offers high performance,

More information

1104D-44TA Industrial Diesel Engine

1104D-44TA Industrial Diesel Engine Whatever your application, there's an 1104 engine for you. Part of the Perkins 1100 Series, the range's 4 cylinder, 4.4 litre engines are smooth and quiet in operation. Designed to meet EU Stage II/IIIA

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-161-0 (1/9) Rev. 0 ENGINE SPECIFICATIONS Engine Model Base Model : AH-4HK1X (Intercooler turbo) Model No. : AH-4HK1XYBW-01 Customer EXPORT Application General power Drawing No. E4-1033-016-1

More information

6LY400 6LY MHP 440 MHP MARINE COMMON-RAIL ENGINES

6LY400 6LY MHP 440 MHP MARINE COMMON-RAIL ENGINES 6LY4 6LY44 4 MHP 44 MHP MARINE COMMON-RAIL ENGINES Specifications Configuration In-line 6-cylinder, 4-stroke, vertical, water-cooled diesel engine Maximum output at crankshaft *294 kw@33 rpm [4 mhp]@33

More information

Volvo High-performance, lowemission

Volvo High-performance, lowemission A406X6 VOLVO ARTICULATED HAULER Engine output SAE J1349: Net 295 kw 395 hp Gross 297 kw 398 hp Body volume: 22 m 3 29.0 yd 3 Load capacity: 36 t 40 sh ton Volvo High-performance, lowemission direct-injected,

More information

1104D-44T Industrial Diesel Engine

1104D-44T Industrial Diesel Engine Whatever your application, there s an 1104 engine for you. Part of the Perkins 1100 Series, the range s 4 cylinder, 4.4 litre engines are smooth and quiet in operation. Designed to meet EU Stage II/IIIA

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 224 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

ENGINE SPECIFICATIONS

ENGINE SPECIFICATIONS No. IS-08-025-0 ( 1/9 ) Rev. 0 ENGINE SPECIFICATIONS Engine Model Customer Application Drawing No. ( 3D Data Code ) Base Model : 4LE1T (Stage 3A / Interim Tier4) Model No. : BV-4LE1TYGV-01 EXPORT Generator

More information

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm

C7 ACERT Industrial Engine Tier 3/Stage IIIA 205 bkw/ rpm CAT ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1 Rotation

More information

2200 Series 2206D-E13TA Industrial Engine EU Stage IIIA, U.S. EPA Tier kw / hp

2200 Series 2206D-E13TA Industrial Engine EU Stage IIIA, U.S. EPA Tier kw / hp The ability to power your machine line-up with one engine supplier is truly achieveable with Perkins. We have introduced a platform of 9-18 litre industrial engines that completes our market-leading industrial

More information

C32 ACERT Industrial Engine Tier bkw/ rpm

C32 ACERT Industrial Engine Tier bkw/ rpm CAT ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...162.0 mm (6.38 in) Displacement... 32.1 L (1,958.86 in 3 ) Aspiration...Turbocharged Aftercooled Compression

More information

1200 Series E70 TAG1M Marine Auxiliary Engine 109 kw ( rpm

1200 Series E70 TAG1M Marine Auxiliary Engine 109 kw ( rpm Based on Perkins universally acclaimed 1206 Series and renowned throughout the power generation industry for its superior performance and reliability. The Perkins E70M is a turbocharged, charge air-cooled,

More information

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm

C7 ACERT Industrial Power Unit Tier 3/Stage IIIA 168 bkw/ rpm CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...110.0 mm (4.33 in) Stroke...127.0 mm (5.0 in) Displacement... 7.2 L (442 in³) Aspiration... Turbocharged ATAAC Compression Ratio...17:1

More information

for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling

for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling Gendrive Series 1600 Gx0 for Power Generation Continuous/Prime/Peak Applications with air-to-air charge air cooling Dimensions and Masses Engine Dimensions (LxWxH) mm (in) Mass, dry kg (lbs) 10V 1598 x

More information

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance

Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance Technical File and Copy of United States Environmental Protection Agency (EPA) Statement of Compliance MARINE DIESEL ENGINES D7.3L DI LD / D7.3L D-Tronic (Mercury MerCruiser D7.3L LD D-Tronic and D7.3L

More information

2014 Jetta Technical Specifications

2014 Jetta Technical Specifications 2014 Jetta ENGINE 2.0L, inline four cylinder, 8V, MPFI 1.8L inline four cylinder, 16V, 2.0L, inline four cylinder, 20V, turbocharged/intercooled, TSI turbocharged and intercooled, DI Bore 3.25 in 82.5

More information

PERFORMANCE ENGINEERING

PERFORMANCE ENGINEERING PERFORMANCE ENGINEERING Every part, every component, every system on our engines is guided by Kohler s exclusive Performance Engineering. It s your assurance that every engine we produce will live up to

More information

CREATING POWER SOLUTIONS. 3H50TICD 3H50TIC 3H50TI 4H50TICD 4H50TIC 4H50TI. Hatz Diesel EN-US.

CREATING POWER SOLUTIONS. 3H50TICD 3H50TIC 3H50TI 4H50TICD 4H50TIC 4H50TI. Hatz Diesel EN-US. CREATING POWER SOLUTIONS. HTICD HTIC HTI HTICD HTIC HTI Hatz Diesel EN-US www.hatz-diesel.com The modern three- and four-cylinder power packages Compact, light, economical, robust and environmentally friendly:

More information