Privredno društvo za tehničko ispitivanje i analizu "Jugoinspekt Control" d.o.o. Bar Laboratorija
|
|
|
- Alan Arnold
- 6 years ago
- Views:
Transcription
1 Dodatak Sertifikatu o akreditaciji - identifikacioni broj: ATCG-0049 Annex to Accreditation Certificate-Identification Number:ATCG-0049 Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li Annex to Accreditation Certificate - Accreditation Number Li Standard: MEST EN ISO /IEC 17025:2011 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation: / Akreditacija važi do: Accreditation is valid to: Akreditovana laboratorija za ispitivanje Accredited laboratory of testing Privredno društvo za tehničko ispitivanje i analizu "Jugoinspekt Control" d.o.o. Bar Laboratorija ul Jovana Tomaševića bb, Bar Područje akreditacije /Scope of accreditation: Fizičko hemijska i uzorkovanje goriva Phiysical and chemical testing and sampling of fuel ATCG Q izdanje /izmjena 1/3 Datum: Strana 1/6
2 Detaljni obim akreditacije/detailed scope of accreditation Laboratorija, Privredno društvo za tehničko ispitivanje i analizu "Jugoinspekt Control" d.o.o. Bar, Lučka zona bb, Bar * Metoda se sprovodi na terenu ** Metoda se sprovodi u Laboratoriji i na terenu Vrsta ili karakteristika koja se Metoda 1 *Tečni naftni i - Ručno 1 2 Motorni benzin / Gasoline Dizel gorivo / Diesel fuel Sampling Fizička /Physical analyse Sampling dizel-goriva - Uzimanje uzoraka Sirova nafta i tečni naftni i - Laboratorijsko određivanje gustine - Metoda pomoću areometra/ Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method Naftni i - Određivanje karakteristika destilacije na atmosferskom pritisku/ Petroleum products - Determination of distillation characteristics at atmospheric pressure Mjerni opseg: C *Tečni naftni i - Ručno MEST EN ISO 3675:2008 MEST EN ISO 3405:2011 ATCG Q izdanje /izmjena 1/3 Datum: Strana 2/6
3 Vrsta ili karakteristika koja se Metoda 6 dizel-goriva,uzimanje uzoraka 2 3 Dizel gorivo / Diesel fuel Eurodizel / Eurodiesel Fizička /Physical analyse Sampling Određivanje tačke paljenja - Metoda u zatvorenom sudu po Penski- Martensu / Determination of flash point - Pensky-Martens closed cup method Mjerni opseg: 0 do C; U=0,327 Dizel-gorivo i ulja za loženje - Određivanje tačke filtrabilnosti / Diesel and domestic heating fuels Determination of cold filter plugging point Mjerni opseg: -30 do C U=0,378 Naftni i - Izračunavanje cetanskog indeksa za goriva dobijena iz srednjeg destilata prema jednačini sa četiri promjenjive / Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation *Tečni naftni i - Ručno MEST EN ISO 2719:2014 MEST EN 116:2013 MEST ISO 4264:2008 A1:2015 ATCG Q izdanje /izmjena 1/3 Datum: Strana 3/6
4 Vrsta ili karakteristika koja se Metoda 3 Eurodizel / Eurodiesel 11 dizel-goriva - Uzimanje uzoraka Fizička /Physical analyse Sirova nafta i tečni naftni i - Laboratorijsko određivanje gustine - Metoda pomoću areometra / Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method Mjerni opseg: 800 do 850 kg/m 3 U=0,116 Naftni i - Određivanje karakteristika destilacije na atmosferskom pritisku / Petroleum products - Determination of distillation characteristics at atmospheric pressure Mjerni opseg: C U=0,141 Određivanje tačke paljenja - Metoda u zatvorenom sudu po Penski- Martensu /Determination of flash point - Pensky-Martens closed cup method Mjerni opseg: 0 do C U=0,327 MEST EN ISO 3675:2008 MEST EN ISO 3405:2011 MEST EN ISO 2719:2014 ATCG Q izdanje /izmjena 1/3 Datum: Strana 4/6
5 Vrsta ili karakteristika koja se Sampling 17 Dizel-gorivo i ulja za loženje - Određivanje tačke filtrabilnosti / Diesel and domestic heating fuels - Determination of cold filter plugging point Mjerni opseg: -30 do C U=0,378 Naftni i - Izračunavanje cetanskog indeksa za goriva dobijena iz srednjeg destilata prema jednačini sa četiri promjenjive /Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation *Tečni naftni i - Ručno Metoda MEST EN 116:2013 MEST EN ISO 4264:2008 A1: Ulje za loženje/ Lighting oil Fizička /Physical analyse 18 dizel-goriva - Uzimanje uzoraka 19 Sirova nafta i tečni naftni i - Laboratorijsko određivanje gustine - Metoda pomoću areometra / Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method Mjerni opseg : 750 do 900 kg/m 3 MEST EN ISO 3675:2008 ATCG Q izdanje /izmjena 1/3 Datum: Strana 5/6
6 Tečno naftni gas Autogas Vrsta ili karakteristika koja se Sampling 24 Naftni i - Određivanje karakteristika destilacije na atmosferskom pritisku / Petroleum products - Determination of distillation characteristics at atmospheric pressure Mjerni opseg: C U=0,141 Određivanje tačke paljenja - Metoda u zatvorenom sudu po Penski- Martensu / Determination of flash point - Pensky-Martens closed cup method Mjerni opseg: 0 do C U=0,327 Dizel-gorivo i ulja za loženje - Određivanje tačke filtrabilnosti / Diesel and domestic heating fuels - Determination of cold filter plugging point Mjerni opseg: -30 do C U=0,378 Naftni i - Izračunavanje cetanskog indeksa za goriva dobijena iz srednjeg destilata prema jednačini sa četiri promjenjive /Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation *Tečni naftni gasovi Metoda uzimanja uzoraka Metoda MEST EN ISO 3405:2011 MEST EN ISO 2719:2014 MEST EN 116:2013 MEST EN ISO 4264:2008 A1:2015 MEST EN ISO 4257:2011 Ovаj Obim vаži sаmo uz Sertifikаt o аkreditаciji sа аkreditаcionim brojem Li od This Scope of accreditation is valid only with accreditation certificate No Li issued on Direktor ATCG Ranko Nikolić ATCG Q izdanje /izmjena 1/3 Datum: Strana 6/6
Institut za transport INTRA d.o.o. Podgorica Kontrolno tijelo Nikšićki put 20, Podgorica
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A 08.01 Annex to Accreditation Certificate - Accreditation Number K A 08.01 Standard: MEST EN ISO/IEC 17020 :2013 Datum dodjele/ obnavljanja
Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava Kontrolno tijelo
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A 08.01 Annex to Accreditation Certificate - Accreditation Number K A 08.01 Standard: MEST EN ISO/IEC 17020 :2013 Datum dodjele/ obnavljanja
ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul Zetskih Vladara bb Podgorica
Dodatak Sertifikatu o akreditaciji broj: Li 08.04 Annex to Accreditation Certificate : Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation:.
ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul. Zetskih Vladara bb Podgorica
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li 08.04 Annex to Accreditation Certificate - Accreditation Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date
ADRIAINSPEKT d.o.o. Poslovnica za naftu i naftne proizvode Department for oil and oil products Ciottina 17b, HR Rijeka
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. : 383-02/09-75/19 Urbroj/Id. : 569-04/2-09-50 Datum izdanja priloga /Annex Issued on: 2009-10-30 Norma: HRN EN ISO/IEC
Institut za transport INTRA d.o.o. Podgorica Laboratorija za ispitivanje Nikšićki put br. 20, Podgorica
Dodatak Sertfkatu o akredtacj - dentfkacon broj: ATCG-0033 Replaces Annex dated: 26.10.2015. Dodatak Sertfkatu o akredtacj sa akredtaconm brojem L 09.06 Annex to Accredtaton Certfcate - Accredtaton Number
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
ISBN SANS 342:2006 Edition 4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan roa
ISBN 0-626-18752-4 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18752-4 SANS 342:2006 SOUTH AFRICAN NATIONAL STANDARD Automotive diesel fuel Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SGS West Thurrock Laboratory Contact: David Mercer (Laboratory Manager) 859 London Road Tel: +44 (0)1708 681943 West Thurrock Fax: +44 (0)1708
Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
Annex no. 1 of Accreditation Certificate no. LI 333 from
Valid from 04.02.2008 to 04.02.2012 Oil Products Laboratory DJ No. 226, Nvodari, Constana county belonging to SC ROMPETROL QUALITY CONTROL SRL 1 2 3 4 Physical tests 1. Determination of the density with
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Prenton Way Contact: Dr J Roberts North Cheshire Trading Estate Tel: +44 (0)151 649 9955 Prenton Fax: +44 (0)151 649 9977 Wirral E-Mail:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Nordic Camp Supply Kabul (HKIA) Fuel Testing
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division 6220 Culebra Road, P.O. Drawer 28510 San Antonio, TX 78228-0510
DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore. Energy Engineering Lab
DEPARTMENT OF CHEMICAL ENGINEERING University of Engineering & Technology, Lahore Energy Engineering Lab Introduction Energy is often defined as the capacity to do work. Several different forms of energy,
SCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION InnoTech Alberta Inc.
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Third edition 2005-11-01 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 031 Issue date: 21 ugust 2018 ccredited to Unit 7 Prince William Drive
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 DCG PARTNERSHIP 1, LTD. 4170 A South Main Pearland, TX 77581 Louis D Agostaro Phone: 281-648-1894 Ext. 201 REFERENCE MATERIAL PRODUCER Valid To: November 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
Certificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L2264.03 Analysts, Inc. 2450 Hassell Road Hoffman Estates IL 60195 has met the requirements set forth in L-A-B s policies and procedures,
10.6 Schedule of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
10.6 Scope of Accreditation
GEO-CHEM Middle East Laboratory No. ATL0015 is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing
Supply of Services for Detailed OEB Crude Assay Analysis
Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries
ISO Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fifth edition 2012-08-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
Multi-Parameter Certified Reference Material
Multi-Parameter Certified Reference Material MPCRM s are premium level, dual certified reference materials certified in accordance with both ISO 17025 and ISO Guide 34 under our UKAS accreditation. They
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
Paragon Scientific Ltd Proficiency Testing Scheme Schedule
Paragon Scientific Ltd Proficiency Testing Scheme Schedule Proficiency Testing Scheme Schedule Page 1 of 16 Issue : 29/01/2015 Print : 25/06/2018 Viscosity ASTM D445 - Standard Test Method for Kinematic
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONSUMER TESTING LABORATORIES, INC. 611 Dream Valley Road Rogers, AR 72756 Chessie Koko Phone: 479-636-8782 CHEMICAL Valid To: May 31, 2018 Certificate Number:
STS Directory Accreditation number: STS 0630
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 TÜV SÜD Schweiz AG Geschäftsbereich Process Safety WRO 1055.5.24 Mattenstrasse 24 CH-4002 Basel Head: Mischa Schwaninger
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Unit A Shears Way Brooklands Close Sunbury-on-Thames Middlesex TW16 7EE Contact: Mr Craig Stone Tel: +44 (0)1932 732103 Fax: +44 (0)1932 732113 E-Mail: craig.stone@intertek.com Website: SUMMARY OF ACCREDITATION
Closed Cup Flash Point Tester
www.labtron.com info@labtron.com We have distinguished ranges of Closed Cup Flash Point Tester especially designed to offer highest level of accuracy and quality giving a versatility in the capacity and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
Main Roads Technical Standard
Main Roads Technical Standard IMPORTANT INFORMATION The requirements of this document represent Technical Policy of the department and contain Technical Standards. Compliance with the department s Technical
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
ISO epoint.edu.vn ISO page 1 / 5
page 1 / 5 page 2 / 5 iso 33000 pdf 3.11 2007/1 Page 1-4 ISO Trapezoidal screw threads Tr WWW.F-M-S.DK NOMINAL PITCH DIAMETER d 2 & D 2 d 2 /D 2 = d/d PDn (PDn = 0.5P) EXTERNAL THREAD d = major diameter
Index 1. ISO 8217 :
Index 1. ISO 8217 : 2010... 2 a. MARINE DISTILLATE FUELS... 2 b. MARINE RESIDUAL FUELS...3 2. ISO 8217 : 2005... 4 a. MARINE DISTILLATE FUELS... 4 b. MARINE RESIDUAL FUELS Grades 30, 80, 180 mm 2 /s (cst)...
Alberta Innovates - Technology Futures ~ Fuels & Lubricants
Report To: 5 Kings College Road Toronto, Ontario, M5S 3G8 Attention: Curtis Wan E-mail: curtis.wan@utoronto.ca Fax: Alberta Innovates - Technology Futures ~ Fuels & Lubricants 250 Karl Clark Road, Edmonton,
ISO 8217 INTERNATIONAL STANDARD. Petroleum products Fuels (class F) Specifications of marine fuels
INTERNATIONAL STANDARD ISO 8217 Fourth edition 2010-06-15 Petroleum products Fuels (class F) Specifications of marine fuels Produits pétroliers Combustibles (classe F) Spécifications des combustibles pour
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
Croatian crude oils 30 years ago and today (analysis and distillation)
Croatian crude oils 30 years ago and today (analysis and distillation) M. Fabuliæ Ruszkowski, M. Radoševiæ, Š. Podolski, R. Gorup, Z. Mariæ PROFESSIONAL PAPER The work comprises processing of the Slavonija
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
Scope of testing. State: March Contents: siemens.com/energy
Scope of testing State: March 2017 Siemens AG - Material testing laboratory Nuremberg Contents: 1. Our services 2. Quality assurance 3. Sampling and bottles 4. Scope of testing of material testing laboratory
GB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
Differences in raw material sources for biofuel processing
Differences in raw material sources for biofuel processing Kovács, A.J. Kacz, K. Lakatos, E. Neményi, M. University of West Hungary Institute of Biosystems Engineering Address: 2 Vár. Mosonmagyaróvár H-9200.
GB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
Fuel oils Specification
TANZANIA STANDARD CDC15 (4029)P3 (Rev. of TZS 673:2014) Fuel oils Specification 0 Foreword This Tanzania Standard was prepared under the direction of Petroleum and Petroleum Products Technical committee,
BQ-9000 Quality Management System. Producer Requirements
BQ-9000 Quality Management System Producer Requirements Revision 5 Effective Date: February 1, 2008 2008 National Biodiesel Board This requirements document has been prepared by the National Biodiesel
FREQUENTLY ASKED QUESTIONS (FAQs)
FREQUENTLY ASKED QUESTIONS (FAQs) What are the Petrochemicals? Any chemical derived from crude oil,crude products or natural gas. Where the petrochemicals are used? In the manufacture of Synthetic rubber,
Company name: Čerpadla NEPTUN Created by: Václav König Phone: Date:
Position Qty. Description 1 SQ 2-55 Note! Product picture may differ from actual product Product No.: 9651199 3" multi-stage, submersible pump designed for domestic water supply, liquid transfer in tanks,
COMPETITIVE INITIATIVE AVIATION FUEL RECLAMATION SYSTEM TECHNICAL SPECIFICATION
1.0 SCOPE COMPETITIVE INITIATIVE AVIATION FUEL RECLAMATION SYSTEM TECHNICAL SPECIFICATION A system brand name or equal to Filterdyne Filtration Systems, Inc. Fuel Reclaim System Model F-111 Special, as
IGS-M-CH-044-1(0) Sept IGS. Iranian Gas Standards !" #$%&' () Insulating Oils for use in Power Transformers Part 1
IGS-M-CH-044-1(0) Sept. 2008 APPROVED IGS Iranian Gas Standards!" #$%&' () Insulating Oils f use in Power Transfmers Part 1. Fax:(9821)-8131-5679 1123 456728 9:1;7?7 @A9?;1 BE8 4FG= HA2IJ 4K LMN
BQ-9000 Quality Management System. Accredited Producer Requirements
BQ-9000 Quality Management System Accredited Producer Requirements Revision 4 Effective Date: February 1, 2007 This requirements document has been prepared by the National Biodiesel Accreditation Commission,
Warter Fuels JSC Aviation Gasoline AVGAS 100LL Edition VIII
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
Precision Thermometers for Material Testing
Precision Thermometers for Material Testing Precision thermometers acc. to ASTM, IP, BS, DIN, ISO, ANSI, AFNOR, S.T.P.T.C. For standardized material testing procedures such as mineral oil testing Catalogue
Viscosity & Flash Point Standards For Reference, Validation, and Calibration
For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point reference materials
Fractional Distillation Lab Simulating The Refining of Petroleum 12/12 Integrated Science 3 Redwood High School Name : Per:
Simulating The Refining of Petroleum 12/12 Integrated Science 3 Redwood High School Name : Per: Introduction Petroleum, or crude oil, is a complex mixture of substances. It is believed that crude oil is
Viscosity & Flash Point Standards For Reference, Validation, and Calibration
& Flash Point s For Reference, Validation, and Calibration Since 1938 CANNON Instrument Company has been a leader in viscosity measurement. We provide a broad range of viscosity standards and flash point
White Paper.
The Advantage of Real Atmospheric Distillation Complying with the ASTM D7345 Test Method in the Distillation Process Introduction / Background In the past, refiners enjoyed a constant supply of the same
Louis Dreyfus Claypool Holdings, LLC. Biodiesel Production Plant Claypool, Indiana
Louis Dreyfus Claypool Holdings, LLC Biodiesel Production Plant Claypool, Indiana Soybeans 163,000 Bu. = 48 Railcars = 172 Trucks Electricity 156,695 Kwh Natural Gas 3,049 Dth Claypool Inputs/Outputs Per
ISO/TC 28 Plenary Meeting. Delft, settembre Riunione Plenaria Unichim 8 Novembre 2016, UNI
ISO/TC 28 Plenary Meeting Delft, 26-30 settembre 2016 Davide Faedo ISO/ TC 28 Title and scope ISO/TC 28 Petroleum products and related products of synthetic or biological origin ISO/TC 28 Petroleum products
ISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
PETROLEUM LABORATORY TESTING AND OPERATIONS
* FM 10-67-2 Field Manual No. 10-67-2 HEADQUARTERS DEPARTMENT OF THE ARMY Washington, DC, 2 April 1997 PETROLEUM LABORATORY TESTING AND OPERATIONS Table of Contents Page PREFACE CHAPTER 1 I CHAPTER 2 I
PRIKLJU^NI ELEMENTI OD ALUMINIZIRANOG ^ELI^NOG LIMA (aluminata) DEBLJINE 2 mm Fittings made up of aluminium coated plate, thickness 2 mm
PRIKU^NI EEMENTI O UMINIZIRNOG ^EI^NOG IM (aluminata) EBINE 2 mm Fittings made up of aluminium coated plate, thickness 2 mm 8 Z VS, MI TO RIMO NBOE! FOR YOU, WE O IT BEST! Fittings made up of aluminium
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission
ALL TESTS. Density Oscillating U-tube method * IP 365. Distillation characteristics of petroleum products - Micro distillation method IP 596
Tests marked * are ISO17025 accredited ALL TESTS TEST NAME Density Oscillating U-tube * IP 365 Distillation characteristics of petroleum products - Micro distillation IP 596 Mercaptans, hydrogen sulphide,
Bunkering With New Fuels Building on Strong Foundations.
Bunkering With New Fuels Building on Strong Foundations. Intertek ShipCare Services. Michael Green. Global Technical Manager Bunker Fuel Testing. 1 Sulphur Regulations Marpol Annex VI Marpol Annex VI introduced
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD CANADA INC. 1229 Ringwell Drive Newmarket, Ontario, Canada, L3Y 8T8 William (Mac) Elliott Phone: 813 284 2736 melliott@tuvam.com www.tuv-sud.ca ELECTRICAL
Determination of Volume Correction Factors for FAME and FAME / Mineral-diesel blends
H & D Fitzgerald Ltd. Determination of Volume Correction Factors for FAME and FAME / Mineral-diesel blends Carried out for the Energy Institute by H&D Fitzgerald Ltd. Cefn Du Tremeirchion St. Asaph LL17
Sampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18436-01-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 22.01.2018 to 28.10.2019 Holder of certificate: ISP
TESTING OF FUELS : FLASH AND FIRE POINT
Department of Mechanical Engineering Indian Institute of Technology New Delhi II Semester -- 2017 2018 MCL 241 Energy systems and Technologies TESTING OF FUELS : FLASH AND FIRE POINT 1. Introduction The
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK retby usiness Park Ashby Road Stanhope urton upon Trent Staffordshire DE15 0YZ Contact: Mr R M Allen Tel: +44 (0)1283 216334 Fax: +44 (0)1283
ISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
Biodiesel Fuel Quality
2012 Collective Biofuels Conference Temecula, California Biodiesel Fuel Quality August 17-19, 2012 Presented by Gorge Analytical, LLC Significant effort and technical consideration has gone in to developing
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MABAMEX S.A. DE C.V. Blvd. El Refugio #25551 Florido 1 Seccion Tijuana, Baja California, MEXICO C.P. 22237 Galia Frez Phone: 011 52 664 627 8055 MECHANICAL
1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.
(Page 1 of 6) LUBRICATING PRODUCTS MGS-92-12K 1.0 DESCRIPTION. This specification covers motor vehicle lubricating products for delivery in prepackaged containers such as drums, pails, etc., or for delivery
Internal Combustion Engines
Thermochemistry & Fuels Lecture 4 1 Outline In this lecture we will discuss the properties and characteristics of diesel fuels: Cetane number and index Viscosity and cold behaviour Flash point Sulphur
Warter Fuels JSC Aviation Gasoline AVGAS 115/145 Edition II
1. Scope of TS 2. Usage scope of TS subject 3. Division and designation 4. Requirements and research 4.1. General properties 4.1.1. Antiknock additives 4.1.2. Dyeing additives 4.1.3. Antioxidant additives
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
Mineral Turpentine Adulterant in Lubricating Oil
DOI:10.7598/cst2015.1095 Chemical Science Transactions ISSN:2278-3458 2015, 4(4), 975-980 RESEARCH ARTICLE Mineral Turpentine Adulterant in Lubricating Oil RAGHUNATH TOCHE 1, SHOBHA BORADE 2, MADHUKAR
E/ECE/324/Rev.2/Add.119/Amend.1 E/ECE/TRANS/505/Rev.2/Add.119/Amend.1
23 May 2012 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826
The Eurasian Economic Community Customs Union Commission Decision of October 18, 2011 N 826 THE ADOPTION OF TECHNICAL REGULATIONS OF THE CUSTOMS UNION "On requirements for automobile and aviation gasoline,
DRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 249-5 Second Edition 2018-mm-dd Engine Oils Performance Classification Part 5: Specification for Internal Combustion engine oils used in twostroke cycle motorcycle gasoline engines
AMENDMENT OF SOLICITATION
DALLAS AREA RAPID TRANSIT DALLAS, TEXAS 1. SOLICITATION NO.: AMENDMENT OF SOLICITATION 2. AMENDMENT NO.: 3. EFFECTIVE DATE: 4. BRIEF SOLICITATION DESCRIPTION: B-1021874 1 05/30/12 NRV Fuel and Fuel Management