Contamination Handbook. For use with the Schroeder EasyTest Patch Test Kit (EPK) and TWG Fluid Analysis
|
|
- Frederica Norris
- 6 years ago
- Views:
Transcription
1 Contamination Handbook For use with the Schroeder EasyTest Patch Test Kit (EPK) and TWG Fluid Analysis
2
3 Table of Contents How to use this handbook.... page 4 Contamination Classification in accordance with ISO 4406: 1987/ page 5-6 Contamination Comparison Photos page 9-18 Types of Contamination....page Contamination Classification in accordance with SAE AS4059:D.... page 7 Contamination Classification in accordance with NAS / page 8 3 CONTAMINATION HANDBOOK
4 How to use this handbook This Contamination Handbook is supplied as part of the EasyTest TM Patch Test Kit (EPK-K) from Schroeder Industries and can also be used as reference tool for other fluid analysis projects, including estimating the ISO Cleanliness Code for water glycol fluid samples (Schroeder part number TWG). The photos found on pages 8 through 17 were taken through a 100X microscope after 100 ml of fluid was pulled through a 0.8µm patch 47 mm in diameter. These photos are also applicable for 28 ml of fluid pulled through a 0.8µm 25 mm patch and viewed under a 100x microscope. As noted on each page, the space between two neighboring scale marks is 10µm. These photos represent the various cleanliness levels identified for each respective photograph. To determine the general contamination class level of fluid sample in question, the residue on the resulting patch is compared to that seen in the photos on pages 8 through 17. The closest match will reveal the estimated contamination level of the subject fluid sample. Particle count information provided in the classifications on pages 4 through 7 are included for reference only. Exact particle counts cannot be determined with the patch method of analysis. CONTAMINATION HANDBOOK 4
5 Contamination classification in accordance with ISO 4406:1987/1999 ISO- Class Number of Particles more than up to & including 0 0, , ,000 2, ,000 4, ,000 8, ,000 16,000 ISO- Class more than Number of Particles up to & including 15 16,000 32, ,000 64, , , , , , , ,000 1,000, ,000,000 2,000, ,000,000 4,000, ,000,000 8,000, ,000,000 16,000, ,000,000 32,000, ,000,000 64,000, ,000, ,000, ,000, ,000,000 5 CONTAMINATION HANDBOOK
6 Contamination classification in accordance with ISO /1999 determination of ISO code Particle Count Per 100ml Larger Than Indicated Size /18/13 ISO Class ISO 4406: ISO 4406: CONTAMINATION HANDBOOK particles size in μm 6
7 Contamination classification in accordance to SAE AS4059: D ISO 4402 >1 µm >5 µm >15 µm >25 µm >50 µm >100 µm ISO >4 µm >6 µm >14 µm >21 µm >38 µm >70 µm SAE Code A B C D E F Contamination classes ,560 3,120 6,250 12,500 25,000 50, , , , ,000 1,600,000 3,200, ,220 2,430 4,860 9,730 19,500 38,900 77, , , ,000 1,250, ,730 3,460 6,920 13,900 27,700 55, , , ,220 2,450 4,900 9,800 19,600 39, ,700 3,390 6, ,020 7 CONTAMINATION HANDBOOK
8 Contamination classification in accordnce to NAS /1964 Extended to particle range 2-5 μm NAS- Class Number of Particles Amount of Contamination (ACFTD) 2-5 μm 5-15 μm μm μm μm >100 μm [mg/l] ,250 2,500 5,000 10,000 20,000 40,000 80, , , ,000 1,280,000 2,560,000 5,120, ,000 2,000 4,000 8,000 16,000 32,000 64, , , ,000 1,024,000 2,048,000 4,096, ,425 2,850 5,700 11,400 22,800 45,600 91, , , , ,012 2,025 4,050 8,100 16,200 32,400 64, , ,440 2,880 5,760 11,520 23, ,024 2,048 4, CONTAMINATION HANDBOOK 8
9 Contamination Comparison Photos ISO 4406: 1999 Class 14/12/9 SAE AS 4059: D Class 4 NAS 1638 Class 3 1 scale mark= 10µm 9 CONTAMINATION HANDBOOK
10 Contamination Comparison Photos ISO 4406: 1999 Class 15/13/10 SAE AS 4059: D Class 5 NAS 1638 Class 4 1 scale mark= 10µm CONTAMINATION HANDBOOK 10
11 Contamination Comparison Photos ISO 4406: 1999 Class 16/14/11 SAE AS 4059: D Class 6 NAS 1638 Class 5 1 scale mark= 10µm 11 CONTAMINATION HANDBOOK
12 Contamination Comparison Photos ISO 4406: 1999 Class 17/15/12 SAE AS 4059: D Class 7 NAS 1638 Class 6 1 scale mark= 10µm CONTAMINATION HANDBOOK 12
13 Contamination Comparison Photos ISO 4406: 1999 Class 18/16/13 SAE AS 4059: D Class 8 NAS 1638 Class 7 1 scale mark= 10µm 13 CONTAMINATION HANDBOOK
14 Contamination Comparison Photos ISO 4406: 1999 Class 19/17/14 SAE AS 4059: D Class 9 NAS 1638 Class 8 1 scale mark= 10µm CONTAMINATION HANDBOOK 14
15 Contamination Comparison Photos ISO 4406: 1999 Class 20/18/15 SAE AS 4059: D Class 10 NAS 1638 Class 9 1 scale mark= 10µm 15 CONTAMINATION HANDBOOK
16 Contamination Comparison Photos ISO 4406: 1999 Class 21/19/16 SAE AS 4059: D Class 11 NAS 1638 Class 10 1 scale mark= 10µm CONTAMINATION HANDBOOK 16
17 Contamination Comparison Photos ISO 4406: 1999 Class 22/20/17 SAE AS 4059: D Class 12 NAS 1638 Class 11 1 scale mark= 10µm 17 CONTAMINATION HANDBOOK
18 Contamination Comparison Photos ISO 4406: 1999 Class 23/21/18 SAE AS 4059: D Class 13 NAS 1638 Class 12 1 scale mark= 10µm CONTAMINATION HANDBOOK 18
19 Types of Contamination Particle Type: Mainly Rust; white particles are additives Effect: - Rapid oil aging - Breakdowns in pumps, valves - Wear and tear scale mark = 45 µm 6 19 CONTAMINATION HANDBOOK
20 Types of Contamination Particle Type: Oil ageing products Effect: - Blocking of filters - Silting scale mark = 45 µm 6 CONTAMINATION HANDBOOK 20
21 Types of Contamination Particle Type: Metal fragment Effect: - Breakdowns in pumps, valves - Wearing of seals - Leakage - Oil ageing 1 scale mark = 45 µm 21 CONTAMINATION HANDBOOK
22 Types of Contamination Particle Type: Particles and fragments in bronze, brass and copper Effect: -Breakdowns in pumps, valves - Oil ageing - Leakage - Wearing of seals 1 scale mark = 45 µm CONTAMINATION HANDBOOK 22
23 Types of Contamination Particle Type: Gel-type residue from filter element Effect: - Blocking of filter - Silting 1 scale mark = 45 µm 23 CONTAMINATION HANDBOOK
24 Types of Contamination Particle Type: Silicates due to lack of, or inadequate, air breather-filter Effect: -Heavy wear on components -Breakdowns in pumps, valves - Wearing of seals 1 scale mark = 45 µm CONTAMINATION HANDBOOK 24
25 Types of Contamination Particle Type: Colored particles (red/brown), synthetic particles (blue) Effect: -Breakdowns in pumps, valves -Wearing of seals 1 scale mark = 45 µm 25 CONTAMINATION HANDBOOK
26 Types of Contamination Particle Type: Fibers due to initial contamination, open tank, cleaning cloths, etc. Effect: - Blocking of nozzles - Leaking from seat valves 1 scale mark = 45 µm CONTAMINATION HANDBOOK 26
27 Types of Contamination Contaminant: Coal dust Machine: Gearbox Industry: Coal Mining Patch Test filter: 5 Magnification: 100x Probable Indications: unfiltered vent/breather 27 CONTAMINATION HANDBOOK
28 Types of Contamination Contaminant: Dirt / silicon / organic Machine: Gearbox Industry: Cement Patch Test filter: 10 Magnification: 100x Probable Indications: Ingress most likely through unfiltered vent/ breather CONTAMINATION HANDBOOK 28
29 Types of Contamination Contaminant: Silicates/organic dirt Machine: Pump gearbox Industry: Mining Patch Test filter: 10 Magnification: 100x Probable Indications: Dirt ingress through unfiltered/ Unscreened breather (verified). 29 CONTAMINATION HANDBOOK
30 Types of Contamination Contaminant: Fiber, synthetic Machine: Gearbox Industry: Food processing Patch Test filter: 5 Magnification: 100x Probable Indications: Most likely source of fiber is degrading filter or fibrous gasket material. CONTAMINATION HANDBOOK 30
31 Types of Contamination Contaminant: Wear metals: oxidized ferrous (blackened) and brass/bronze (gear facing) Machine: Gearbox Industry: Mining Patch Test filter: 10 Magnification: Probable Indications: 100x Oxidized ferrous material indicates excessive temperature possible cutting or grinding at metal to metal interface. Bronze residue is sacrificial gear face material. 31 CONTAMINATION HANDBOOK
32 Types of Contamination Contaminant: Oxidized ferrous wear metal, brass/bronze; some silicate and emulsified oil. Machine: Gearbox Industry: Mining Patch Test filter: 10 Magnification: 100x Probable Indications: Water content in oil confirmed with positive crackle test; high temperature cutting wear. Silicate and coal dust in combination with lubricant acting as abrasive. CONTAMINATION HANDBOOK 32
33 Types of Contamination Contaminant: Oxidized ferrous cutting wear metal possibly from failing seal; dirt Machine: Pump gearbox oil. Industry: Mining Patch Test filter: 10 Magnification: Probable Indications: 100x Cutting wear most likely from seal; contaminated with dirt, most likely from unfiltered breather vent. 33 CONTAMINATION HANDBOOK
34 Types of Contamination Contaminant: Oxidized ferrous material Machine: Vacuum pump Industry: Chemical Patch Test filter: 5 Magnification: 100x Probable Indications: Cutting wear from seal failure; extremely high temperature in evidence CONTAMINATION HANDBOOK 34
35 Types of Contamination Contaminant: Water emulsified in oil captured by organic dirt Machine: Gearbox Industry: Mining Patch Test filter: 10 Magnification: 100x Probable Indications: Dirt has entered open breather vent, along with water ingress. 35 CONTAMINATION HANDBOOK
36 L West Park Road Leetsdale, PA USA p f
HYDAC FILTER SYSTEMS GMBH
The information in this brochure relates to the operating conditions and applications described. For applications or operating conditions not described, please contact the relevant technical department.
More informationKees Veltman Director/Owner
Kees Veltman Director/Owner 696a Noria/Solinas klanten Noria Corporation The World Leader in Machinery Lubrication and Oil Analysis Education and Consulting Education & Training Consulting Magazine & Newsletters
More informationFundamentals of Oil Analysis
IRC RESEARCH AND TECHNOLOGY FORUM Wednesday May 6, 2015 Thursday May 7, 2015 Madison, WI 53706 University of Wisconsin-Madison Pyle Center 702 Langdon St. University of Wisconsin-Madison Fundamentals of
More informationPRODUCT CATALOG. Luneta.com
PRODUCT CATALOG Luneta.com 1 ABOUT US Luneta, LLC develops advanced machinery lubricant inspection technology for machine condition monitoring and reliability. Luneta s technology is designed primarily
More informationOxidation Loss of additive effectiveness Dispersancy, Corrosion, Wear Permanent viscosity drop in multi - grade oils
Used oil analysis is comparable to a medical analysis with a blood test. Like blood, lubricating oil contains a good deal of information about the envelope in which it circulates. Wear of metallic parts,
More informationENHANCED CLEANLINESS - OPTIMUM PERFORMANCE COMPANY PROFILE TECHNOLOGY BY
ENHANCED CLEANLINESS - OPTIMUM PERFORMANCE COMPANY PROFILE TECHNOLOGY BY About Us is an international filtration company, with offices in USA, UAE and Turkey. We are more than just a filter supplier, we
More informationFiltration efficiency: 99% or more HEPO2element
High Precision Filter for Liquids Series Filtration efficiency: 99% or more HEPO2element Filtration accuracy: 2, 4, 6 or 13 µm (Filtration efficiency 99%) Membrane element Filtration accuracy: 0.2 or 0.4
More informationA Filtration Primer. Filter Elements. High Pressure Filters. Tank-Mounted, Return Line and Medium Pressure Filters. Water Service Filters
A Filtration Primer Filter Elements High Pressure Filters Tank-Mounted, Return Line and Medium Pressure Filters Water Service Filters Section 6 Reservoir Accessories SCHROEDER INDUSTRIES 259 Principles
More informationManaging Particle Contamination with Chevron ISOCLEAN Certified Lubricants
Managing Particle Contamination with Chevron ISOCLEAN Certified Lubricants It s the Small Stuff Construction companies with new and older equipment in their fleets must make combating particle contamination
More informationOIL CAPACITIES FOR SERIES HP APPROXIMATE CAPACITIES IN QUARTS AND GALLONS
OIL CAPACITIES FOR SERIES HP APPROXIMATE CAPACITIES IN QUARTS AND GALLONS SINGLE REDUCTION REDUCERS - FLOOR MOUNTED POSITION UNIT SIZE 0 5 0 5 0 50 60 80 00 0 WORM OVER GEAR WORM UNDER GEAR VERTICAL OUTPUT
More informationFCL Filter Cart Flow rate up to 22 gpm (82 lpm)
click here to return to website FCL Filter Cart Flow rate up to 22 gpm (82 lpm) Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320) Filter new fluids during transfer and replenishment
More informationCONTENT. Page 2. General information. Page 4. Cleanliness classes. Page 7. Water contamination. Page 8. Oil contamination - origin and consequences
Since 1986 CONTENT General information Cleanliness classes Water contamination Oil contamination - origin and consequences Size comparison Filter elements Filter element change By-pass filters Connection
More information3/15/2017. Oil Analysis: When the Oil Speaks, You Should Listen! Oil Analysis. Common Wear Metals Found in Oil. Common Wear Metals Found in Oil
Oil Analysis Oil Analysis: When the Oil Speaks, You Should Listen! Michael Holloway, ALS Tribology Ken Hill, WearCheck Lubrication Services Session Number T16 Elemental Detects the amount and type of elements
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction.... 1- HF65 Series.... 1-9 HF66 Series.... 1-15 HF67 Series.... 1-21 HF68 Series.... 1-1 Dual Spin-On Assembly.... 1-5 Introduction Hydraulic Filtration Systems Cummins
More information10 Hydraulic Filters
1 Hydraulic Filters Introduction................................... 1-3 HF65 Series................................. 1-9 HF66 Series................................ 1-15 HF67 Series................................
More informationSeries RFLD Duplex In-Line Filter
APPLICATION Series RFLD Duplex In-Line Filter Welded Pressures to 230 psi Flows to 3900 gpm HYDAC RFLD in-line filters are designed for in-line mounting and are mainly used in continuously operating systems.
More informationHIGH QUALITY PROTECTION AND PERFORMANCE. Purolator Classic filters keep your vehicles running smooth
HIGH QUALITY PROTECTION AND PERFORMANCE Purolator Classic filters keep your vehicles running smooth CLASSIC PROTECTION Purolator Classic is Your Best Choice for Automotive Filtration Air filters trap contaminants
More informationRMF Rolling Media Filter Operation & Service Manual
8 L-4205 RMF Rolling Media Filter Operation & Service Manual 580 West Park Road Leetsdale, PA 15056 ph. 724.318.1100 fax 724.318.1200 An ISO 9001:2008 Certified Company www.schroederindustries.com 580
More informationSeries RFL In-Line Filter
APPLICATION Series RFL In-Line Filter Pressures 2 bar Flows to 400 l/min HYDAC RFL In-Line Filters are designed for in-line mounting. These filters can be used in hydraulic, flushing, and for extraction
More informationDifferentially Pumped Rotary Platform (DPRP) Instructions
Differentially Pumped Rotary Platform (DPRP) Instructions Linear and lateral alignment is maintained by a special ball bearing made of hardened carbon steel. These bearings will corrode. Do not allow moisture
More informationLecture 3 : Cleanroom Technology (Contamination Control)
Lecture 3 : Cleanroom Technology (Contamination Control) The topics covered the following: Cleanroom Definition Standards and Classifications Contamination: Types, Effects, and Sources Cleanroom Systems
More informationISOCLEAN Proof of Performance: ACME CEMENT USA ACME CEMENT CO. Rocky Mountain Industrial Solutions
ACME CEMENT CO Page 1 OVERVIEW Rocky Mountain Industrial Solutions as subcontractor for Rocky Mountain Industrial Services (similar name but 2 separate and unrelated companies) has successfully completed
More informationFiltration efficiency: 99% or more
High Precision Filter for Liquids Series Filtration efficiency: 99% or more HEPO2element Filtration accuracy: 2, 4, 6 or 13 µm (Filtration efficiency 99%) Membrane element Filtration accuracy: 0.2 or 0.4
More informationSection 3.2. Machine Maintenance - Hydraulic Oil and Tank Information
Section 3.2 Machine Maintenance - Hydraulic Oil and Tank Information Hydraulic Oil Tank: Hydraulic Tank Oil Level... 3.2.2 Sight Gauge... 3.2.2 Warning Lights... 3.2.2 Hydraulic Oil Tank Pressurizing System...
More informationTask Force on Particle Counts in Transformer Insulating Fluids. Omni Houston Hotel Room: Regency AB Monday, March 8, :00AM 9:15AM
Task Force on Particle Counts in Transformer Insulating Fluids Omni Houston Hotel Room: Regency AB Monday, March 8, 2010 8:00AM 9:15AM IEEE/PES Transformers Committee / Insulating Fluid Subcommittee Spring
More informationMonitoring Water in Lube Oil
Monitoring Water in Lube Oil Page 1/10 Water in Lube Oil Water is vital to life on earth, but in some contexts water is unwanted and can cause severe damage. On the other hand oil is also a important part
More informationLUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS
LUBRICATION, INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR STAINLESS STEEL CONE DRIVE SPEED REDUCERS Cone Drive double-enveloping worm gear speed reducers are used throughout industry to provide
More informationMFS/MFD HY-TRAX Installation Guide
8 MFS/MFD HY-TRAX Installation Guide L-4534 MFD HY-TRAX An ISO 9001:2008 Certified Company 580 West Park Road Leetsdale, PA 15056 ph. 724.318.1100 fax 724.318.1200 www.schroederindustries.com L-4534 MFS/MFD
More informationa Dirtbox or a Gearbox? How to use Offline Filters to Rescue Dirty Gearboxes
Is it a Dirtbox or a Gearbox? How to use Offline Filters to Rescue Dirty Gearboxes by Justin Stover Page 1/6 www.ccjensen.com C.C.JENSEN INC 320 Coweta Industrial Parkway Suite J Newnan, GA 30265 Phone
More informationULSD DIESEL INFORMATION
ULSD DIESEL INFORMATION UPDATED SEP 2011 To ensure compliance with regulations governing vehicle engine emissions and under EU Environmental Directive all diesel fuel/gas oil supplied in Ireland for on
More informationImplementing Sustainable Lubrication Improvements. Darryl Gray Matthew Grant
Implementing Sustainable Lubrication Improvements Darryl Gray Matthew Grant Starting Point- Turning This into This Overview Background on Xstrata/EHM Starting Point Lubrication Process Improvement Benefits
More informationZTF. Compressed Air Filters scfm INNOVATIVE COMPRESSED AIR SOLUTIONS FILTER ASSEMBLIES ELEMENT OPTIONS SPECIFICATIONS ACCESSORIES
INNOVATIVE COMPRESSED AIR SOLUTIONS COMPRESSED AIR SOLUTIONS Compressed Air Filters 15-1600 scfm FILTER ASSEMBLIES ELEMENT OPTIONS SPECIFICATIONS ACCESSORIES Z E K S Z T F C O M P R E S S E D A I R F I
More informationIndustrial Strength Lubricants
Industrial Strength Lubricants A Complete Line of Proven Formulas for Every Lubricating Need! EVERYTHING ELSE IS JUST A LUBE! Tri-Flow Lubricants are ideal for preventive and corrective maintenance in
More informationPO Box 645, Stockton, Missouri, FAX superiorgearbox.com W D0446-A 4/1/05 1
W000-7000-D0446-A 4/1/05 1 SAFETY PRECAUTIONS CAUTION Please read this entire document prior to operating the gear drive. Gear drive failure and / or injury to operators may be caused by improper installation,
More informationOil High-capacity and full of power reserve by premature check
Oil analysis Oil High-capacity and full of power reserve by premature check Oil is the central component of every hydraulic system. When a system fails, oil contamination is usually the cause. Oil is continously
More informationInstruction Manual For DODGE. Airport Baggage Handling Systems Speed Reducers
Instruction Manual For DODGE Airport Baggage Handling Systems Speed Reducers ABHS TXT109 - TXT115 - TXT125 ABHS TXT209 - TXT215 - TXT225 ABHS TXT309A - TXT315A - TXT325A ABHS TXT409A - TXT415A - TXT425A
More informationPneumatic High-Viscosity Filtration System Instruction Manual
Pneumatic High-Viscosity Filtration System Instruction Manual P/N: 61512 05/17 1 2 Pneumatic High Viscosity Filtration Systems PN: 61512 14 April, 2009 rev A 36933 Pneumatic Hand Cart HV Filtration System
More informationOil secure power and performance
Oil analysis Oil secure power and performance through professional control Oil is the central component of every hydraulic system. When a system fails, oil contamination is usually the cause. Oil is continously
More informationHIGH PERFORMANCE OIL FILTERS FOR V8 ROVER ENGINES. Oil Filtration Specialists
HIGH PERFORMANCE OIL FILTERS FOR V8 ROVER ENGINES WWW.V8FILTERS.CO.UK Oil Filtration Specialists OBJECTIVES 1. Dramatically reduce circulation of engine damaging solid contamination 2. Improve engine reliability
More informationSOME OTHER BENEFITS DERIVED FROM LUBE OIL ANALYSIS ARE:
SAMPLING OVERVIEW: A preventive maintenance program using lube oil analysis is beneficial in many ways. With scheduled oil analysis, wear products can be identified and corrective action taken before equipment
More informationTRAINING ON ANTAM STANDARD CODE For TESTING OF KNAPSACK MISTERS CUM DUSTERS. Theory 18: Waterproof test (Test Code Section IV(9) and D- 11 of Annex D)
TRAINING ON ANTAM STANDARD CODE For TESTING OF KNAPSACK MISTERS CUM DUSTERS Theory 18: Waterproof test (Test Code Section IV(9) and D- 11 of Annex D) 2nd Training of Trainers on ANTAM Codes 16-28 October2016,
More informationHY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
More informationEURO BEAD BREAKER MODEL # Instruction Manual Parts Breakdown
EURO BEAD BREAKER MODEL #10107 Instruction Manual Parts Breakdown Operation WARNING The optional air/hydraulic pump is capable of generating fluid pressure up to 10,000 PSI. Keep both hands on the handles
More informationREDUCER LUBRICATION HORIZONAL APPLICATIONS VERTICAL MOUNT REDUCER INSTALLATION CHAR-LYNN H, S, T AND 2000 SERIES 6B SPLINE MOTOR INSTALLATION
Parts Replacement Manual For HYDROIL TORQUE-ARM Speed Reducers Taper Bushed For Char-Lynn * H, S, T and 000 Series B Spline Motors SIZES: HXT0A, HXTA, HXT0A These instructions must be read thoroughly before
More informationOn Site Gearbox inspections
On Site Gearbox inspections Although a comprehensive on-site gearbox inspection will be carried out by a trained Gearbox Technician. Inspection will be worked in to fit in with planned shutdown period
More informationMining & Haul Truck Filtration Systems
Mining & Haul Truck Filtration Systems 1. Rear Differential, Wheel Motor, Hydraulic, and Transmission Filtration Systems 2. On-board Filtration Systems for Rear Differential and Hydraulic Systems 3. Crusher
More informationAnglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.
Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA
More informationTHE CLEANEST FUEL. PERIOD.
Donaldson Delivers Front Cover Headline Should Fuel Be Filtration Centered In for This Cummins Color Box QSK Engines Cummins is a registered trademark of Cummins, Inc. THE CLEANEST FUEL. PERIOD. Treated
More informationFilter elements, two-stage for installation in wind turbines with Hydac filter housings. Type 65. Filter elements. Contents.
Filter elements, two-stage for installation in wind turbines with Hydac filter housings Type 65. Filter elements RE 51461 Edition: 2017-02 Replaces: 11.13 Exchangeable with filter element 1300 R... BN...HC/-B4-KE50
More informationWhat is Wear? Abrasive wear
What is Wear? Written by: Steffen D. Nyman, Education Coordinator, C.C.JENSEN A/S It is generally recognized that contamination of lubricating and hydraulic oils are the primary cause of wear and component
More informationParts Replacement Manual For HYDROIL TORQUE-ARM Speed Reducers Taper Bushed For Char-Lynn H, S, T and 2000 Series 6B Spline Motors
s Replacement Manual For HYDROIL TORQUE-ARM Speed Reducers Taper Bushed For Char-Lynn H, S, T and 000 Series B Spline Motors SIZES: HXT3B, HXTB/HXTB, HXTC These instructions must be read thoroughly before
More informationLECTURE 30 to 31 ACCESSORIES USED IN FLUID POWER SYSTEMS FREQUENTLY ASKED QUESTIONS
LECTURE 30 to 31 ACCESSORIES USED IN FLUID POWER SYSTEMS FREQUENTLY ASKED QUESTIONS 1. Explain the two types of the leakages in hydraulic system. In what way do they affect the performance of a fluid system?
More informationFitting-removal and maintenance
Fitting-removal and maintenance Fitting of bearings 136 General rules 136 Fitting principles 136 Hot fitting 137 Press fitting (or with anti-rebound hammer) 138 Adapter sleeves 139 Removal of bearings
More informationFluid Handling Products. Fluid Handling a proactive approach to contamination control. Portable Filtration. Dedicated Filtration
Fluid Handling Products Fluid Handling a proactive approach to contamination control Actively filtering lubricants can dramatically improve industrial equipment performance, preventing production downtime
More informationRECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS
Phone : +32 2 742 96 82 Fax : +32 2 732 12 18 e-mail : recyclass@plasticsrecyclers.eu website: www.recyclass.eu RECYCLABILITY EVALUATION PROTOCOL FOR PE FILMS Standard Laboratory Practice Version 1.0 Published
More informationSpin-on filter according to Bosch Rexroth standard. Type 7 SL ; 7 SLS Features. Contents. RE Edition: Replaces: 01.
Spin-on filter according to Bosch Rexroth standard Type 7 SL 30 260; 7 SLS 90 260 RE 51426 Edition: 2015-03 Replaces: 01.10 Nominal sizes: 7 SL 30 260; 7 SLS 90 260 Nominal pressure 7 bar [101 psi] Connection
More informationROTAIR LUBRICANTS FOR OIL-INJECTED SCREW COMPRESSORS SECURING OPTIMAL PERFORMANCE
ROTAIR LUBRICANTS FOR OIL-INJECTED SCREW COMPRESSORS SECURING OPTIMAL PERFORMANCE 2 Why lubricants matter THE RIGHT LUBRICANT Lubricants are essential for the operation of air compressors. For the perfect
More informationDiesel Polishing Systems
SPECIALIST FILTRATION SUPPLY STOCK AND SERVICE MANAGEMENT SOFTWARE STANDARD SPIN ON FILTER SUPPLY OIL & FUEL ANALYSIS Diesel Polishing Systems Call NOW on 01635 870250 Why is a fuel polishing station needed?
More informationPHONE: 937/ FAX:
Magnetic Tank Cleaners Multi Magnet Standard or Heavy Duty Lenz magnetic tank cleaners pick up material that ordinary filters miss and thus maintain cleaner oil. The cleaner the oil; the less problems
More informationENGINEERING AND CONSTRUCTION BULLETIN
ENGINEERING AND CONSTRUCTION BULLETIN No. 2007-21 Issuing Office: CECW-CE Issued: 16 Nov 2007 Subject: Revision to EM 1110-2-1424 Lubricants and Hydraulic Fluids - Appendix C Applicability: Guidance 1.
More informationTechenomics Oil Analysis Information
Techenomics Oil Analysis Information Oil Analysis is the sampling and Laboratory analysis of the lubricants properties; it provides knowledge of lubricants suspended s, and wear debris. Oil Analysis, generally
More informationINSTRUCTION MANUAL. I/P Converter DSG BXXY3Z DSG BXXY4Z
INSTRUCTION MANUAL I/P Converter DSG BXXY3Z DSG BXXY4Z Revision 2.0 3.626 016136 en Page 1/15 Should you have any questions concerning the I/P converter, please contact the Service Department of the Product
More informationMobile Filter Unit MFU-15
Mobile Filter Unit MFU-15 Description The MFU 15 MobileFiltration unit is used as a portable service unit for filling hydraulic systems, flushing small hydraulic systems as well as for cleaning in bypass
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More informationOVERVIEW OF RESERVOIR ACCESSORIES
OVERVIEW OF RESERVOIR ACCESSORIES Reservoir Accessories The reservoir of a hydraulic system can be a significant source of contamination. At the same time, the reservoir is an ideal location for correcting
More informationUnit D: Agricultural Equipment Systems. Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment
Unit D: Agricultural Equipment Systems Lesson 1: Understanding Applications of Fluids and Lubricants in Agricultural Equipment 1 Terms Ash content bottom dead center cloud point compression ratio coolant
More informationSampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
More informationMaintenance Adjustments
4 Maintenance and Adjustments Chapter Contents Cleaning the Printer and Paper Handling Accessories..... 158 Cleaning the HP Digital Copier....................... 161 Cleaning ADF and Glass............................
More informationAerial Maintenance. Drip less oil or light machine oil is used on control cables, door latches, and hinges.
Oils, greases, and other lubricants used by this Department. Engine oil SAE 15W40 is used in the crankcase of our apparatus, high-fog pump, 1981 American La France road pump transmission and also as a
More informationFIRST FOR VERSATILITY THE HIPPO FILTER SYSTEM. Before After
FIRST FOR VERSATILITY THE HIPPO FILTER SYSTEM Full-flow filtration systems By-pass filtration systems Water Based Fluids Process Fluids Heating Oils Turbine Oils Bio-ethanol Kerosene Diesel Petrol Oils
More informationFocus on filters. Field testing of CLAAS ORIGINAL filters Everything you need to know about filters.
Focus on filters Field testing of CLAAS ORIGINAL filters Everything you need to know about filters. Real-world performance is what counts. Only CLAAS tests in the field. This guide tells you everything
More informationPASCO PASCO PINCH VALVES
Pinch Valves 7 PASCO PASCO PINCH VALVES www.processautomationinc.net 126 1 General Pinch valve is simple in construct. It is made of three parts, i.e. body, pipe sleeve and actuator. Its superior performance
More informationControllingSiliconandSootContentintheCrankCaseOiltoImprovePerformanceofDieselEngine
Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering Volume 16 Issue 2 Version 1. Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals
More informationCold Clear. Cold Weather. Clear Biodiesel. The Clear Solution.
Cold Clear Cold Weather. Clear Biodiesel. The Clear Solution. The new ASTM D6751 Cold Soak Filtration test is leaving many biodiesel producers and consumers out in the cold. In response, 70CentsaGallon.com
More informationPortable Filter Carts 10MFP with Moduflow
Portable Filter Carts 10MFP with Moduflow Applications for Portable Filter Carts Parker portable filter carts are the ideal way to prefilter and transfer fluids into reservoirs or to clean up existing
More informationDonaldson Delivers. A Single Source for Mining Filtration. Keep your equipment running clean in a gritty world.
Donaldson Delivers A Single Source for Mining Keep your equipment running clean in a gritty world. Donaldson delivers the most comprehensive line of filtration solutions for above and below ground mining,
More informationLubrication Monitoring & Inspection
Lubrication Reliability Best Practices Lubrication Monitoring & Inspection Enluse B.V. The Netherlands Tel.: + 31 (0) 76 57 81 280 Lubricant Monitoring & Inspection Line Save Your Equipment with Constant
More information527 ECOSHIELD BIODEGRADABLE ROCK DRILL OIL ISO 46 through 320
527 ECOSHIELD BIODEGRADABLE ROCK DRILL OIL ISO 46 through 320 Ecoshield Biodegradable Rock Drill Oil is a readily biodegradable, anti-wear, extreme pressure, emulsifiable, low fog generating oil that is
More informationIntroduction to Hydraulic Filtration
sales@nationalfiltersinc.com * www.nationalfilters.com 360 Industrial Parkway * Harbor Beach, MI USA * 48441 TF: 1-888-797-3275 * Tel: 989-479-3273 * Fax: 989-479-3251 1 What is Fluid Power? Fluid power
More informationFilters. DFFH & DFFHM Series Service and Parts. Index. This symbol is followed by user tips and particularly useful information
142.9 INLET 1.38 35 OUTLET Index 1.25 31.8 1. General 1.4 Tools Required for Maintenance 1.5 Torque Requirements 2. Maintenance 3. Changing the Element 4. Spare Parts List 5. Replacement Element Model
More informationGS-37 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-37 FLARE FLANGE SYSTEM REVISION FEBRUARY 2016 GS-37 GS-37 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 GS-37 Connection
More informationQuality features of genuine oil filters
Quality features of genuine oil filters Filtration performance: Properties To specify the filtration performance of a filter or a filter media, following key properties are typically used: Pressure drop
More informationLIQUID MEDIA BLASTER INSTRUCTIONS
Item #20668 LIQUID MEDIA BLASTER INSTRUCTIONS Pressure Washer Not Included The EASTWOOD LIQUID MEDIA BLASTER is specifically designed to use high pressure water from a pressure washer as a source for powerful
More informationPO Box 645, Stockton, Missouri, FAX superiorgearbox.com
I000-7000-D0447-A 4/7/05 1 SAFETY PRECAUTIONS CAUTION Please read this entire document prior to operating the gear drive. Gear drive failure and / or injury to operators may be caused by improper installation,
More informationAll Racor filter materials and seals are compatible with ultra-low sulphur diesel (ULSD) fuel and B2 to B20 Biodiesel. See Racor bulletin 7679.
000MA Water-in-fuel sensor and indicator. MA units have shielded see-thru bowls; MAM bowls are all-metal. UL-listed drain valve and water sensor probe options are available. Turbine Series Electric Primer
More informationENGINEERING DATA. Fan Bearing Maintenance & Troubleshooting
Information and Recommendations for the Engineer ENGINEERING DATA Fan Bearing Maintenance & Troubleshooting ED-1300 Aerovent TC Ventco Fiber-Aire Twin City Fan & Blower TC Axial Clarage Lubrication Proper
More informationHY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)
FSL HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator
More informationMedium Pressure Filters
Medium Pressure Filters Medium pressure filters can be used in applications up to psi (379 kpa). Donaldson offers both spin-on and in-line cartridge-style filters. Medium Pressure Filters Donaldson Duramax
More informationMobil Delvac Synthetic Gear Oil 75W-90, 80W-140
Mobil Delvac Synthetic Gear Oil 75W-90, 80W-140 Supreme Performance Commercial Gear Lubricants Product Description Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 are synthetic drivetrain lubricants
More informationWARNING DYNABRADE. Air Powered Abrasive Belt Machine
For Serial No.9I1001 and Higher Parts Page Reorder No. PD00 50 Effective June, 2000 Supercedes PD96 16 66402 Tool Post Grinder Instruction Manual Air Powered Abrasive Belt Machine! WARNING Always operate,
More informationThe Feasibility of Fill-for-Life Turbine Oils. Greg Livingstone Fluitec
The Feasibility of Fill-for-Life Turbine Oils Greg Livingstone Fluitec Outline How long is Fill-for-Life anyway? Bleed & Feed Strategy Why do Turbine Oils Fail? Replenishing Antioxidants: 1. Feasibility
More informationIntroducing HyJet V. The first Type V phosphate ester hydraulic fluid with highest-grade approvals from Airbus and Boeing.
Introducing The first Type V phosphate ester hydraulic fluid with highest-grade approvals from Airbus and Boeing. fire-resistant Type V hydraulic fluid offers wear and corrosion protection and long service
More informationMILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
More informationNumber Title Year Organization Page
Id Number Title Year Organization Page 365528 B93.1 Dimension Identification Code for Fluid Power Cylinders; Appendices I and II (NFP(A) T3.6.2-1964) R(1994) 365529 B93.2 Fluid Power Systems and Products
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-48 06 15 (May 2014) ---------------------------------- Preparing Activity: USACE Superseding UFGS-48 13 19.00 10 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationConditioning Specialists Online Monitoring Systems
Section 6: Conditioning Specialists Online Monitoring Systems Advantages of Online Monitoring There are advantages to using online monitoring in replacement of bottle sampling when testing for cleanliness
More information6.4L Diesel Water In Fuel GSB
General Service Bulletin (GSB): This GSB targets the diagnosis, inspection and repair of the 6.4L diesel fuel system. Some 6.4L diesel vehicles may experience drivability concerns due to fuel system failures.
More informationUltipleat SRT Filters
Lenntech info@lenntech.com www.lenntech.com Tel. +31-15-261.09.00 Fax. +31-15-261.62.89 Ultipleat SRT Filters Stress Resistant Technology The Ultimate in Filter Design Ultipleat SRT Filters Pall s Ultipleat
More informationLUBRICANTS, COOLANTS & FILTRATION SOLUTIONS. Genuine Protection
Equipment care LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS Genuine Protection Genuine Protection Komatsu genuine lubricants and coolants are designed to ensure you get the best performance from your machine.
More informationBanlaw LubeCentralTM
Banlaw LubeCentralTM Banlaw s Flush Face Receivers, Evacuation Coupling, and Grease Transfer Coupling Banlaw LubeCentralTM Control contamination, reduce wear and manage your fluid assets with Banlaw LubeCentral
More information