S16U-TA MITSUBISHI DIESEL ENGINES

Transcription

1 S16U-TA GENERAL ENGINE DATA Type... 4-Cycle, Water Cooled Aspiration... Turbo-Carged, After Cooler (Jacket Water to Cooler) Cylinder Arrangement V No. of Cylinders Bore mm (in.) (9.45) Stroke mm (in) (10.24) Displacement liter (in 3 ) (11484) Compression Ratio : 1 Dry Weigt - Engine only - kg (lb) (45194) Wet Weigt - Engine only - kg (lb) (48280) PERFORMANCE DATA Steady State Speed Stability Band at any Constant Load - %... ±0.5 Maximum Overspeed Capacity - rpm Moment of Inertia of Rotating Components GD 2 - kgf m 2 (lbf ft 2 ) (9309) (Includes Std. Flyweel) Cyclic Speed Variation wit Flyweel at 1200 rpm... 1/ rpm... 1/156 AIR INLET SYSTEM Maximum Allowable Intake Air Restriction Wit Clean Filter Element - mm H 2 O (in. H 2 O) (11.8) Wit Dirty Filter Element - mm H 2 O (in. H 2 O) (29.9) EXHAUST SYSTEM Maximum Allowable Back Pressure - mm H 2 O (in. H 2 O) (17.7) LUBRICATION SYSTEM Oil Pressure at Idle -kgf/cm 2 (psi) (21.3) at Rate Speed - kgf/cm 2 (psi) (64-100) Maximum Oil Temperature - C ( F) (203) Oil Capacity of Standard Pan Hig - liter (U.S. gal.) (161.1) Low - liter (U.S. gal.) (116.3) Total System Capacity (Includes Oil Filter) - liter (U.S. gal.) (179.6) Maximum Installation Angle (Std. Pan) Front Down (Engine only) Front Up Side to Side

2 S16U-TA COOLING SYSTEM Coolant Capacity (Engine only) - liter (U.S. gal.) (184.9) Maximum External Friction Head at Engine Outlet - kgf/cm 2 (psi) (14.2) Maximum Static Head of Coolant above Cranksaft Center - m (ft) (41.0) Maximum Outlet Pressure of Engine Water Pump - kgf/cm 2 (psi) (35.6) Standard Termostat (modulating) Range - C ( F) ( ) Maximum Coolant Temperature at Engine Outlet - C ( F) (203) Minimum Coolant Expansion Space - % of System Capacity FUEL SYSTEM Fuel Injection Pump Type... Bosc Type 16 Maximum Suction Head of Feed Pump - mmhg (in. Hg) (4.3) Maximum Static Head of Leak Pipe - mmhg (in. Hg) (14.6) STARTING AIR SYSTEM Air Reservoir Capacity - liter (U.S. gal) (105.6) No. of Air Reservoir... 2 Air Pressure - kgf/cm 2 (psi) (427)

3 S16U-TA ENGINE RATING All data represent net performance wit standard accessories suc as fuel injection pump, water pump, L.O. pump under te following conditions; Barometric pressure ; 100 kpa (750 mmhg) Ambient temperature ; 298 K (25 C) Relative umidity ; 30% ITEM UNIT Calorific value of fuel ;42,700kJ/ kg Engine Speed rpm Remarks Brake Horse Power kw Prime power Specific Fuel Consumption Break Mean Effective Press. g/kw Allowance +5% Kgf/cm Mean Piston Speed m/s Intake Air Flow m 3 /min Exaust Gas Flow m 3 /min Jacket Water Flow l/min Jacket Water Pressure kgf/cm Cooling water (A/C & O/C) Flow l/min Oil Flow l/min Radiated Heat to Ambient Heat Rejection to Jacket Water Heat Rejection to Air & Oil Cooler N.A N.A N.A. Heat Rejection to Exaust N.A. Noise Level db(a) N.A. Max. No Load rpm Governored Speed Note: Break orse power at flyweel end Mecanical 1 m Dis. 1.5m H.

4 S16U-TK GENERAL ENGINE DATA Type... 4-Cycle, Water Cooled Aspiration... Turbo-Carged, Inter Cooler (Raw Water to Cooler) Cylinder Arrangement V No. of Cylinders Bore mm (in.) (9.45) Stroke mm (in) (10.24) Displacement liter (in 3 ) (11484) Compression Ratio : 1 Dry Weigt - Engine only - kg (lb) (45194) Wet Weigt - Engine only - kg (lb) (48280) PERFORMANCE DATA Steady State Speed Stability Band at any Constant Load - %... ±0.5 Maximum Overspeed Capacity - rpm Moment of Inertia of Rotating Components GD 2 - kgf m 2 (lbf ft 2 ) (9309) (Includes Std. Flyweel) Cyclic Speed Variation wit Flyweel at 1200 rpm... 1/ rpm... 1/156 AIR INLET SYSTEM Maximum Allowable Intake Air Restriction Wit Clean Filter Element - mm H 2 O (in. H 2 O) (11.8) Wit Dirty Filter Element - mm H 2 O (in. H 2 O) (29.9) EXHAUST SYSTEM Maximum Allowable Back Pressure - mm H 2 O (in. H 2 O) (17.7) LUBRICATION SYSTEM Oil Pressure at Idle -kgf/cm 2 (psi) (21.3) at Rate Speed - kgf/cm 2 (psi) (64-100) Maximum Oil Temperature - C ( F) (203) Oil Capacity of Standard Pan Hig - liter (U.S. gal.) (161.1) Low - liter (U.S. gal.) (116.3) Total System Capacity (Includes Oil Filter) - liter (U.S. gal.) (179.6) Maximum Installation Angle (Std. Pan) Front Down (Engine only) Front Up Side to Side

5 S16U-TK COOLING SYSTEM Coolant Capacity (Engine only) - liter (U.S. gal.) (184.9) Maximum External Friction Head at Engine Outlet - kgf/cm 2 (psi) (14.2) Maximum Static Head of Coolant above Cranksaft Center - m (ft) (41.0) Maximum Outlet Pressure of Engine Water Pump - kgf/cm 2 (psi) (35.6) Standard Termostat (modulating) Range - C ( F) ( ) Maximum Coolant Temperature at Engine Outlet - C ( F) (203) Minimum Coolant Expansion Space - % of System Capacity Maximum Coolant Temperature at Intercooler inlet, PTK type - C ( F) (113) FUEL SYSTEM Fuel Injection Pump Type... Bosc Type 16 Maximum Suction Head of Feed Pump - mmhg (in. Hg) (4.3) Maximum Static Head of Leak Pipe - mmhg (in. Hg) (14.6) STARTING AIR SYSTEM Air Reservoir Capacity - liter (U.S. gal) (105.6) No. of Air Reservoir... 2 Air Pressure - kgf/cm 2 (psi) (427)

6 S16U-TK ENGINE RATING All data represent net performance wit standard accessories suc as fuel injection pump, water pump, L.O. pump under te following conditions; Barometric pressure ; 100 kpa (750 mmhg) Ambient temperature ; 298 K (25 C) Relative umidity ; 30% ITEM UNIT Calorific value of fuel ;42,700kJ/ kg Engine Speed rpm Remarks Brake Horse Power kw Prime power Specific Fuel Consumption Break Mean Effective Press. g/kw Allowance +5% Kgf/cm Mean Piston Speed m/s Intake Air Flow m 3 /min Exaust Gas Flow m 3 /min Jacket Water Flow l/min Jacket Water Pressure kgf/cm Cooling water (A/C & O/C) Flow l/min Raw water Oil Flow l/min Radiated Heat to Ambient Heat Rejection to Jacket Water Heat Rejection to Air & Oil Cooler N.A N.A N.A. Heat Rejection to Exaust N.A. Noise Level db(a) N.A. Max. No Load Rpm Governored Speed Note: Break orse power at flyweel end Mecanical 1 m Dis. 1.5m H.