FT X-29 SPECIFICATIONS RECOMMENDED SETTINGS. Build Skill Level : Pilot Skill Level :

Size: px
Start display at page:

Download "FT X-29 SPECIFICATIONS RECOMMENDED SETTINGS. Build Skill Level : Pilot Skill Level :"

Transcription

1 FT X-29 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 45.5 in 55.7 mm CENTER OF GRAVITY CG in mm WG SPAN 27.5 in mm WG AREA in dm 2 DRY WEIGHT 26.4 oz g ALL UP WEIGHT AUW 35.2 oz g WG LOADG WL 2.3 oz/ft g/dm 2 WG CUBIC LOADG WCL 6.6 RECOMMENDED SETTGS THROW EXPO AILERON 2 30% ELEVATOR 2 30% RUDDER 2 30% Build Skill Level : Pilot Skill Level : 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

2 FT X-29: Sheet & Tile Key A B B2 A2 A3 A4 S S2 S3 B3 B4 A5 A6 A7 A8 A9 B5 B6 A0 A A2 B7 B8 A3 A4 A5 A6 A8 A9 A20 A7 B9 B0 B B2 A2 A22 A23 A24 A25B3 B4 A26 A27 A28 S4 S5 S6 B5 B6 A29 A30 A3 A32 A33B7 B8 A34 A35 A36 B9 B20 A37 A38 A39 A40 A4B2 B22 A42 A43 A44 B23 B24 A45 A46 A47 A48 A49B25 B26 A50 A5 A52 S7 S8 S9 B27 B28 A53 A54 A55 A56 A57B29 B30 A58 A59 A60 B3 B32 A6 A62 A63 A64 A65B33 B34 A66 A67 A68 B35 B36 A69 A70 A7 A FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

3 Drawing Key FOLD TYPES A B C A - FOLD (ABOVE) B - FOLD (BESIDE) C - FOLD (COVER) LE TYPE/COLOR SYMBOLS PART NUMBER CUT 50% SCORE CREASE NAME MATERIAL MODEL - VERSION QUANTITY GAUGE NUMBER 45 DOUBLE BEVEL 45 SGLE BEVEL EDGE BEVEL NAME MATERIAL MODEL - VERSION CAVITY REMOVE PAPER REFERENCE/ OPTIONAL CENTER OF GRAVITY (CG) 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

4 FT X-29 SHEET OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: CENTER WG BOTTOM PLATE FUSELAGE TOP 2 3 FUSELAGE OUTER SIDE PLATE RIGHT FUSELAGE OUTER SIDE PLATE LEFT 5 4 FUSELAGE NER SIDE PLATE LEFT FUSELAGE NER SIDE PLATE RIGHT 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

5 FT X-29 SHEET 2 OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: CANOPY CANOPY 2 45 SGLE BEVEL 22 5 CANOPY 3 WG PANEL LEFT 45 DOUBLE BEVEL 27 2 WG SPAR OUTER G3 G2 EXHAUST PIPE JIG FUSELAGE JIG 34 EXHAUST NOZZEL WG PANEL RIGHT 45 DOUBLE BEVEL WG SPAR OUTER 45 SGLE BEVEL G RIGHT ANGLE 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

6 FT X-29 SHEET 3 OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: NOSE TOP BOTTOM FUSELAGE COVER 28 VERTICAL STABILIZER 6 FUSELAGE BOTTOM CANOPY FUSELAGE 2 NOSE BOTTOM CANARD CANARD FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

7 FT X-29 SHEET 4 OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: NOSE TOP BOX 9 CENTER SPAR 36 7 FUSE/NOSE CONNECTOR WG SPAR CENTER CENTER SPAR TOP 6 CANOPY FORMER MOTOR POD TOP VERTICAL STABILIZER CONNECTOR 9 REAR FUSELAGE 8 FUSELAGE FRONT 3 MOTOR POD BASE 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

8 FT X-29 SHEET 5 OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: SGLE BEVEL 23 WG PANEL CENTER TOP RIGHT G5 THROW GAUGE 24 WG PANEL CENTER TOP LEFT G4 45 SGLE BEVEL REFLEX GAUGE 30 HORIZONTAL STABILIZER FUSELAGE CENTER/REAR 0 FRONT NOSE FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

9 FT X-29 SHEET 6 OF 6 Designed By: Andres Lu Drawing By: Dan Sponholz Version:.0 Date: mm FUSELAGE REAR COVER 70 MM EDF SUPPORT F MM EDF SUPPORT F2 70 MM EDF SUPPORT R2 70 MM EDF SUPPORT R MM EDF SUPPORT F MM EDF SUPPORT R mm FUSELAGE REAR COVER 64 MM EDF SUPPORT F MM EDF SUPPORT F2 64 MM EDF SUPPORT F2 64 MM EDF SUPPORT R2 64 MM EDF SUPPORT R MM EDF SUPPORT R EDF THRUST TUBE POSTER BOARD 207 FliteTest, LLC. Plans provided free of charge. Copies allowed for personal use only. Not for commercial use. Template Version 4.0.2

10 FT X-29 v..0 TILE-A

11 FT X-29 v..0 TILE-A2 FUSELAGE TOP

12 FT X-29 v..0 TILE-A3

13 FT X-29 v..0 TILE-A4 5 FUSELAGE NER SIDE PLATE LEFT 4 FUSELAGE NER SIDE PLATE RIGHT

14 20 CENTER WG BOTTOM PLATE FT X-29 v..0 TILE-A5

15 FT X-29 v..0 TILE-A6

16 2 FUSELAGE OUTER SIDE PLATE RIGHT 3 FUSELAGE OUTER SIDE PLATE LEFT FT X-29 v..0 TILE-A7

17 FT X-29 v..0 TILE-A8

18 FT X-29 v..0 TILE-A9 3 CANOPY 4 CANOPY 2

19 FT X-29 v..0 TILE-A0 G3 EXHAUST PIPE JIG 5 CANOPY 3 G2 FUSELAGE JIG

20 FT X-29 v..0 TILE-A EXHAUST NOZZEL 34

21 FT X-29 v..0 TILE-A2 G RIGHT ANGLE

22 45 SGL FT X-29 v..0 TILE-A3

23 22 WG PANEL LEFT 45 DOUBLE BEVEL E BEVEL 27 2 WG SPAR OUTER FT X-29 v..0 TILE-A4

24 45 SG 2 WG PANEL RIGHT 45 DOUBLE BEVEL 27 2 WG SPAR OUTER FT X-29 v..0 TILE-A5

25 LE BEVEL FT X-29 v..0 TILE-A6

26 FT X-29 v..0 TILE-A7 35 NOSE TOP

27 FT X-29 v..0 TILE-A8 28 VERTICAL STABILIZER

28 FT X-29 v..0 TILE-A9 6 FUSELAGE BOTTOM

29 FT X-29 v..0 TILE-A CANARD 2 33 CANARD

30 FT X-29 v..0 TILE-A2

31 BOTTOM FUSELAGE COVER FT X-29 v..0 TILE-A22

32 2 CANOPY FUSELAGE FT X-29 v..0 TILE-A23

33 7 NOSE BOTTOM FT X-29 v..0 TILE-A24

34 FT X-29 v..0 TILE-A25 9 NOSE TOP BOX 36 CENTER SPAR

35 FT X-29 v..0 TILE-A26 25 WG SPAR CENTER 26 CENTER SPAR TOP

36 FT X-29 v..0 TILE-A27 29 VERTICAL STABILIZER CONNECTOR 6 CANOPY FORMER 9 REAR FUSELAGE

37 FT X-29 v..0 TILE-A28

38 FT X-29 v..0 TILE-A29

39 7 FUSE/NOSE CONNECTOR FT X-29 v..0 TILE-A30

40 32 MOTOR POD TOP 8 FUSELAGE FRONT FT X-29 v..0 TILE-A3

41 3 MOTOR POD BASE FT X-29 v..0 TILE-A32

42 FT X-29 v..0 TILE-A33 45 SGLE BEVEL 23 WG PANEL CENTER TOP RIGHT

43 FT X-29 v..0 TILE-A34 45 SGLE BEVEL 24 WG PANEL CENTER TOP LEFT

44 FT X-29 v..0 TILE-A35 30 HORIZONTAL STABILIZER

45 FT X-29 v..0 TILE-A36 FRONT NOSE 8

46 G5 THROW GAUGE FT X-29 v..0 TILE-A37

47 G4 REFLEX GAUGE FT X-29 v..0 TILE-A38

48 0 FUSELAGE CENTER/REAR FT X-29 v..0 TILE 39

49 FT X-29 v..0 TILE-A40

50 FT X-29 v..0 TILE-A MM EDF SUPPORT F 70 MM EDF SUPPORT R MM EDF SUPPORT F MM EDF SUPPORT R MM EDF SUPPORT R mm FUSELAGE REAR COVER MM EDF SUPPORT F2

51 FT X-29 v..0 TILE-A mm FUSELAGE REAR COVER MM EDF SUPPORT F 64 MM EDF SUPPORT R MM EDF SUPPORT F MM EDF SUPPORT R MM EDF SUPPORT R2 64 MM EDF SUPPORT F2

52 FT X-29 v..0 TILE-A43 37 EDF THRUST TUBE POSTER BOARD

53 FT X-29 v..0 TILE-A44

54 FT X-29 v..0 TILE-B FUSELAGE TOP

55 FT X-29 v..0 TILE-B2 5 FUSELAGE NER SIDE PLATE LEFT 4 FUSELAGE NER SIDE PLATE RIGHT

56 20 CENTER WG BOTTOM PLATE FT X-29 v..0 TILE-B3

57 2 FUSELAGE OUTER SIDE PLATE RIGHT 3 FUSELAGE OUTER SIDE PLATE LEFT FT X-29 v..0 TILE-B4

58 FT X-29 v..0 TILE-B5 3 CANOPY 5 CANOPY 3 G3 EXHAUST PIPE JIG 4 CANOPY 2 G2 FUSELAGE JIG

59 FT X-29 v..0 TILE-B6 34 EXHAUST NOZZEL G RIGHT ANGLE

60 22 WG PANEL LEFT 45 DOUBLE BEVEL 45 SGLE BEVEL 27 2 WG SPAR OUTER FT X-29 v..0 TILE-B7

61 2 WG PANEL RIGHT 45 DOUBLE BEVEL 45 SGLE BEVEL 27 2 WG SPAR OUTER FT X-29 v..0 TILE-B8

62 FT X-29 v..0 TILE-B9 35 NOSE TOP 28 VERTICAL STABILIZER

63 FT X-29 v..0 TILE-B0 6 FUSELAGE BOTTOM 33 2 CANARD 2 33 CANARD

64 BOTTOM FUSELAGE COVER FT X-29 v..0 TILE-B

65 2 CANOPY FUSELAGE 7 NOSE BOTTOM FT X-29 v..0 TILE-B2

66 FT X-29 v..0 TILE-B3 NOSE TOP BOX 25 WG SPAR CENTER 9 26 CENTER SPAR TOP 36 CENTER SPAR

67 FT X-29 v..0 TILE-B4 29 VERTICAL STABILIZER CONNECTOR 6 CANOPY FORMER 9 REAR FUSELAGE

68 7 FUSE/NOSE CONNECTOR FT X-29 v..0 TILE-B5

69 MOTOR POD TOP 3 MOTOR POD BASE 32 8 FUSELAGE FRONT FT X-29 v..0 TILE-B6

70 FT X-29 v..0 TILE-B7 45 SGLE BEVEL 45 SGLE BEVEL 23 WG PANEL CENTER TOP RIGHT 24 WG PANEL CENTER TOP LEFT

71 FT X-29 v..0 TILE-B8 30 HORIZONTAL STABILIZER FRONT NOSE 8

72 G5 THROW GAUGE G4 REFLEX GAUGE FT X-29 v..0 TILE-B9

73 0 FUSELAGE CENTER/REAR FT X-29 v..0 TILE-B20

74 FT X-29 v..0 TILE-B MM EDF SUPPORT F 70 MM EDF SUPPORT R 64 MM EDF SUPPORT F 64 MM EDF SUPPORT R MM EDF SUPPORT R mm FUSELAGE REAR COVER MM EDF SUPPORT F mm FUSELAGE REAR COVER MM EDF SUPPORT F2 64 MM EDF SUPPORT F MM EDF SUPPORT R MM EDF SUPPORT R2 64 MM EDF SUPPORT R MM EDF SUPPORT F2

75 FT X-29 v..0 TILE-B22 37 EDF THRUST TUBE POSTER BOARD

FT X-29 SPECIFICATIONS RECOMMENDED SETTINGS. Build Skill Level : Pilot Skill Level :

FT X-29 SPECIFICATIONS RECOMMENDED SETTINGS. Build Skill Level : Pilot Skill Level : FT X-9 Version:.0 Date: 07.09.0 SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 45.5 in 55.7 mm CENTER OF GRAVITY CG.75 in 577.85 mm WG SPAN 7.5 in 698.50 mm WG AREA 37.89 in 5.35 dm DRY WEIGHT 6.4 oz

More information

SPECIFICATIONS. DESCRIPTION IMPERIAL METRIC LENGTH in mm CENTER OF GRAVITY (FROM NOSE)

SPECIFICATIONS. DESCRIPTION IMPERIAL METRIC LENGTH in mm CENTER OF GRAVITY (FROM NOSE) FT Dart www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz Version:.0 Date: 08.03.07 SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH.00 in 305.0 mm CENTER OF GRAVITY (FROM NOSE) CG 4.5

More information

FT Mini Scout SPECIFICATIONS

FT Mini Scout SPECIFICATIONS FT Mini Scout www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz Version:. Date: 07.09.08 SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 8.0 in 57. mm CENTER OF GRAVITY CG.0 in.0 mm

More information

FT Mini Bravo. Designed By: Cody Thompson Drawing By: Dan Sponholz SPECIFICATIONS

FT Mini Bravo. Designed By: Cody Thompson Drawing By: Dan Sponholz SPECIFICATIONS FT Mini Bravo www.flitetest.com Designed By: Cody Thompson Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 27.3 in 692.2 mm CENTER OF GRAVITY (FROM NOSE) CG 4 in 355 mm WG SPAN

More information

FT Mini Alpha SPECIFICATIONS

FT Mini Alpha SPECIFICATIONS FT Mini Alpha www.flitetest.com Designed By: Jadyn Tafoya Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 27.5 in 698.5 mm CENTER OF GRAVITY (FROM NOSE) CG 4 in 355 mm WG SPAN

More information

FT Baby Blender SPECIFICATIONS

FT Baby Blender SPECIFICATIONS FT Baby Blender www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 25.0 in 635 mm CENTER OF GRAVITY CG 3.25 in 82.5 mm WG SPAN 24.0 in

More information

FT Simple Scout SPECIFICATIONS

FT Simple Scout SPECIFICATIONS FT Simple Scout www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz Version:.0 Date: 07.0.7 SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 9.00 in 736.6 mm CENTER OF GRAVITY CG.44 in

More information

FT Simple Cub SPECIFICATIONS

FT Simple Cub SPECIFICATIONS FT Simple Cub www.flitetest.com Designed By: Josh Bixler Drawing By: Dan Sponholz Version:.0 Date: 207.06.26 SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 30.5 in 775 mm CENTER OF GRAVITY CG.75 in

More information

FT Otter. Designed By: Peter Sripol Drawing By: Dan Sponholz SPECIFICATIONS RECOMMENDED SETTINGS SHEET & TILE KEY

FT Otter. Designed By: Peter Sripol Drawing By: Dan Sponholz SPECIFICATIONS RECOMMENDED SETTINGS SHEET & TILE KEY FT Otter www.flitetest.com Designed By: Peter Sripol Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 3 in 83 mm CENTER OF GRAVITY CG.5 in 64 mm WG SPAN 40 in 06 mm WG AREA 30

More information

FT Mini Vector SPECIFICATIONS

FT Mini Vector SPECIFICATIONS FT Mini Vector www.flitetest.com Designed By: Peter Sripol Drawing By: Dan Sponholz SPECIFICATIONS DESCRIPTION IMPERIAL METRIC LENGTH 27.7 in 704 mm CENTER OF GRAVITY CG 4 in 355 mm WG SPAN 25 in 635 mm

More information

FT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version: 1.1 Date:

FT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version: 1.1 Date: www.flitetest.com FT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version:. Date: 08..0 GENERAL SPECIFICATIONS: LENGTH: CG: WINGSPAN: WING AREA: DRY WEIGHT: ALL UP WEIGHT: WING LOADING: WCL:

More information

throttle and elevator servos receiver 6 oz. fuel tank FORMER #2 2mm coroplast fuselage sides FORMER #3 FORMER #1 3/16" T-Nut

throttle and elevator servos receiver 6 oz. fuel tank FORMER #2 2mm coroplast fuselage sides FORMER #3 FORMER #1 3/16 T-Nut House of Balsa 1/12 scale FW190 canopy FORMER #1A OS.25FX with Bisson Pitts style muffler 1/8" x 1/4" balsa strips glued on to balsa crutch and shaped to conform to canopy sides (see FORMER 3 SECTION VIEW)

More information

the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) 10% expo; High: 15mm up/down, 10% expo - Wing area: 40dm2

the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) 10% expo; High: 15mm up/down, 10% expo - Wing area: 40dm2 SPECIFICATION - Gravity CG: 165-170 mm (6.5-6.7 in) Back from - Wingspan: 1400mm (55.1 in) the leading edge of the wing, at the fuselage - Length: 1540mm (60.6 in) - Control throw Ailerons: Low: 12mm up/down,

More information

RECOMMENDED EDF AND BATTERY SET UP

RECOMMENDED EDF AND BATTERY SET UP SPECIFICATION - Wingspan: 1150mm (45.3 in) - Length: 1587mm (62.5 in) - Flying weight: 5.0-5.3 kg - Wing area: 40dm2 - Wing loading: 125g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER

More information

Dassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design

Dassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr

More information

Before commencing assembly, please read these instructions thoroughly.

Before commencing assembly, please read these instructions thoroughly. I NSTRUCTI ON M ANUAL Before commencing assembly, please read these instructions thoroughly. (GM034XM) Specifications Wing Span:28.7 in / 730 mm Wing Area:310 sq in / 20 sq dm Flying Weight:28.5 oz / 805

More information

MIG-29. Instruction Manual Book SCALE 1:8 ARF EDF 90MM 95% ALMOST READY TO FLY. Item code: BH153. SPECIFICATION

MIG-29. Instruction Manual Book SCALE 1:8 ARF EDF 90MM 95% ALMOST READY TO FLY. Item code: BH153. SPECIFICATION Instruction Manual Book MIG-29 SCALE 1:8 ARF EDF 90MM Item code: BH153. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH PVC PRINTING. 95% ALMOST READY TO FLY SPECIFICATION Wingspan: 1,420 mm (55.91 in).

More information

for AMT Pegasus jet engine or for Jet Cat P-120 / P-160 Assembly Manual AVIATION Design

for AMT Pegasus jet engine or for Jet Cat P-120 / P-160 Assembly Manual AVIATION Design for AMT Pegasus jet engine or for Jet Cat P-120 / P-160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr

More information

Strix Goblin Instruction Manual. Rev

Strix Goblin Instruction Manual. Rev Strix Goblin Instruction Manual Rev 3-4.24.2017 1 Introduction Thank you for purchasing the Strix Goblin! This is a high performance plank style aircraft and it was designed using aerodynamic principles

More information

Assembly and Operating Manual HR-100. Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.

Assembly and Operating Manual HR-100. Specification: *Length: 41-7/10(1060 mm) *Wing span: 49-1/5(1250 mm) *Flying weight: 45. Assembly and Operating Manual HR-100 Specification: *Length: 41-7/10"(1060 mm) *Wing span: 49-1/5"(1250 mm) *Flying weight: 45.9 oz (1300g) Dear customer, Congratulations on your choice of a factory-assembled

More information

SebArt professional line

SebArt professional line SebArt professional line Mini L39 1,46m ARF 90mm EDF-6S or P20-K30 turbine ASSEMBLY MANUAL The all new L39 Jet ARF was designed by Italy aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design

More information

Supermarine Sparrow I 36 R/C Scale Model Instructions

Supermarine Sparrow I 36 R/C Scale Model Instructions Supermarine Sparrow I 36 R/C Scale Model Instructions CONTACT INFORMATION Designed by: M.K. Bengtson Prototype Builder: Mike Stanley Manufactured and Distributed by: Bengtson Company e-mail: sales@aerodromerc.com

More information

Instruction Manual EXTRA 260-EP. 1075mm (42.32 in) 1000mm (39.37 in) 1100gr gr. 4 channel - 4 mini servo. Axi motor 2820

Instruction Manual EXTRA 260-EP. 1075mm (42.32 in) 1000mm (39.37 in) 1100gr gr. 4 channel - 4 mini servo. Axi motor 2820 1075mm (42.32 in) 1000mm (39.37 in) 1100gr - 1400gr 4 channel - 4 mini servo Axi motor 2820 KIT CONTENTS: We have organized the parts as they come out of the box for better identification during assembly.

More information

MicroWave EDF CONSTRUCTION. A compact electric ducted-fan design that uses recycled ARF foamie jet power systems

MicroWave EDF CONSTRUCTION. A compact electric ducted-fan design that uses recycled ARF foamie jet power systems CONSTRUCTION BY RICH URAVITCH MicroWave EDF A compact electric ducted-fan design that uses recycled ARF foamie jet power systems IF YOU LOOK QUICKLY at the pages of Model Airplane News or, for that matter,

More information

TUCANO cubic inch displacement 2-stroke 0.91 cubic inch displacement 4-stroke

TUCANO cubic inch displacement 2-stroke 0.91 cubic inch displacement 4-stroke INSTRUCTION MANUAL TUCANO 60 0.55 cubic inch displacement 2-stroke 0.91 cubic inch displacement -stroke Requires : 7-channel radio w/ 6 standard servos and 2 low profile retract servos. Wing Span Wing

More information

Zero Fighter 60S cu. in. displacement 2-stroke Requires : 6-channel radio w/ 6 standard servos and 1 low profile retract servo

Zero Fighter 60S cu. in. displacement 2-stroke Requires : 6-channel radio w/ 6 standard servos and 1 low profile retract servo INSTRUCTION MANUAL Zero Fighter 60S 0.60-0.75 cu. in. displacement -stroke Requires : 6-channel radio w/ 6 standard servos and 1 low profile retract servo Specifications Wing Span Wing Area Flying Weight

More information

F9F-2 OPERATIONAL MANUAL

F9F-2 OPERATIONAL MANUAL F9F-2 OPERATIONAL MANUAL 7 different color to meet customer s choice. 2 different material F9F-2/OB: F9F-2/TB: F9F-2/YB: F9F-2/WR: F9F-2/GYR: F9F-2/GRW: F9F-2/BRY: Original Blue Tail Blue Yellow/Blue White/Red

More information

YAK 54 Aerobatic Model Aircraft Assembly and Instruction Manual

YAK 54 Aerobatic Model Aircraft Assembly and Instruction Manual YAK 54 Aerobatic Model Aircraft Assembly and Instruction Manual Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for the novice pilot. It should not be

More information

AVIATOR 25 ARF Almost Ready-to-Fly

AVIATOR 25 ARF Almost Ready-to-Fly AVIATOR 25 ARF Almost Ready-to-Fly Instruction Manual Specifications Wingspan: 54.3 in (1380mm) Length: 45.2 in (1150mm) Wing Area: 438 sq in (34sq dm) Flying Weight: 3.8 b (1700g) Dear Customer, Congratulations

More information

RECOMMENDED MOTOR AND BATTERY SET UP

RECOMMENDED MOTOR AND BATTERY SET UP SPECIFICATION - Wingspan: 6000mm (236.2 in) - Length: 2873mm (113.1 in) - Flying weight: 14-18 kg - Wing area: 219.4 dm2 - Wing loading: 64g/dm2 - Wing type: HQ airfoils - Covering type: Genuine ORACOVER

More information

I n s t r u c t i o n M a n u a l. Instruction Manual SPECIFICATION

I n s t r u c t i o n M a n u a l. Instruction Manual SPECIFICATION I n s t r u c t i o n M a n u a l Instruction Manual SPECIFICATION - Wingspan: 3200mm (125,9 in) - Length: 1650mm (64,9 in) - Flying weight: 3000gr 3200gr - Wing area: 64.5 dm2 - Wing loading: 46g/dm2

More information

WIndscreen Mount rudder & elevator servos in cockpit area.

WIndscreen Mount rudder & elevator servos in cockpit area. SE5 (modifi ed) foam board model design by Alistair Potter 2016 Do not copy or distribute without owner s permission. For personal use only, the author grants permission for commercial printing to foam

More information

70MM YAK-130 STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM

70MM YAK-130 STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM 70MM YAK-130 REALISTIC RETRACT & FLAPS INSTALLED RIGID STRONG DURABLE EPO STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM Table of Contents Introductions 3 Contents of Kit 4 Assemble the plane 5 Battery

More information

SebArt professional line

SebArt professional line SebArt professional line Sebart 30E ARF ASSEMBLY MANUAL The new Sebart 30E ARF was designed by Italy aerobatic pilot Sebastiano Silvestri, it is the replica of a new real full-scale aerobatic plane. This

More information

SebArt professional line

SebArt professional line SebArt professional line Sebart 30E ARF ASSEMBLY MANUAL The new Sebart 30E ARF was designed by Italy aerobatic pilot Sebastiano Silvestri, it is the replica of a new real full-scale aerobatic plane. This

More information

64MM F-16 Fighting Falcon V2

64MM F-16 Fighting Falcon V2 64MM F-16 Fighting Falcon V2 SIMPLE Simple assembly RIGID STRONG DURABLE EPO STABLE SMOOTH FLYING PERFORMANCE FMSMODEL.COM Table of Contents Introductions 3 Contents of Kit 4 Assemble the plane 5 Battery

More information

Parts not supplied. Power Train Twin 48/50mm fans GAD 18A Esc`s 3-4s Lipos

Parts not supplied. Power Train Twin 48/50mm fans GAD 18A Esc`s 3-4s Lipos F/A-18 Hornet Instruction Manual (Beta1.1 Manual) We would like to thank you for purchasing our Green Air Designs F/A-18 Hornet and hope you have as much fun building and flying yours as we have ours.

More information

Instruction Manual. We wish you many enjoyable flights with your plane and once again thank you for your choosing a Phoenix Model product

Instruction Manual. We wish you many enjoyable flights with your plane and once again thank you for your choosing a Phoenix Model product Instruction Manual Wing span: 1590mm (626 in) Length: 1100mm (433 in) Weight: 1500gr - 1700gr Motor: AXI 2814/10 or Motor: 500-600 w/ gear box Radio: 4 Channel / 4 servos standar Propeller: 12 x 47 We

More information

F3D-30 ARF ASSEMBLY MANUAL

F3D-30 ARF ASSEMBLY MANUAL F3D-30 ARF ASSEMBLY MANUAL This Manuel is the sole property of Kangke Industrial USA, Inc. Reproducing any part without the consent of Kangke Industrial USA, Inc. is a lawful violation. Kangke Industrial

More information

ASK 21 - Flight Manual. Check List / 1

ASK 21 - Flight Manual. Check List / 1 Check List / 1 Pre Flight Check 1. Main pins secured? 2. Rear wing attachment pins: is the safety lock visible above the pin? 3. Horizontal tail unit pins secured. Is the spring retainer engaged? 4. Elevator

More information

50CC SKY LINK 50CC SKY LINK. 50cc gasoline engine. Requires : 6-channel radio w/ 9 high torque servos. Specifications

50CC SKY LINK 50CC SKY LINK. 50cc gasoline engine. Requires : 6-channel radio w/ 9 high torque servos. Specifications INSTRUCTION MANUAL 50CC SKY LINK 50CC SKY LINK 50cc gasoline engine Requires : 6-channel radio w/ 9 high torque servos Specifications Wing Span Wing Area Flying Weight Fuselage Length 108 in / 75 mm 1575

More information

STORCH. Parts. Additional items needed to complete the Storch

STORCH. Parts. Additional items needed to complete the Storch STORCH Parts Fuse with Greenhouse- (Attached) Left and right wing panel Horizontal and vertical stab 2 Wing center blocks 2 Carbon spares for wing 1 Undercarriage with wheels 2 Undercarriage shocks 2 Carbon

More information

CIRRUS AIRPLANE MAINTENANCE MANUAL

CIRRUS AIRPLANE MAINTENANCE MANUAL DIMENSIONS AND AREAS 1. GENERAL This section describes those diagrams and text which shows the area, dimensions, stations, access doors, and physical locations of the structural members of the airplane.

More information

Wing Area: 1050 in 2 [67.7 dm 2 ] Wing Loading: 10 oz/ft 2 [31 g/dm 2 ]

Wing Area: 1050 in 2 [67.7 dm 2 ] Wing Loading: 10 oz/ft 2 [31 g/dm 2 ] MANUAL ADDENDUM This manual addendum provides additional instructions for assembling the power system onto the Bird of Time. Please read through this addendum before you start the assembly of the Bird

More information

Dimensions And Areas. 1. General. A. Airplane Dimensions and Areas

Dimensions And Areas. 1. General. A. Airplane Dimensions and Areas Dimensions And Areas 600: DIMENSIONS AND AREAS 1. General This section describes those diagrams and text which shows the area, dimensions, stations, access doors, and physical locations of the structural

More information

Designed by Will of MikeysRC.com

Designed by Will of MikeysRC.com NOTES FROM THE TWO VIDEOS: cg=16" from nose, Will verified this, it IS IN FRONT OF THE WIN LE!!! EDF LE = 1/2" forward of front bulkhead Tail side of fuse14.5" height 2.25" 7.5" to the angle start to the

More information

Original Engel Telemaster

Original Engel Telemaster Original Engel Telemaster Plans and Instructions This document shows the plans, sheet and on one page each, a translation of the German building instructions and bill of material, as well as scanned copies

More information

Wing Loading: Length: Radio: 6 channel

Wing Loading: Length: Radio: 6 channel INSTRUCTION MANUAL SPECIFICATIONS Wingspan: 56.5 in [1435mm] Wing Area: 421 in 2 [27.2 dm 2 ] Weight: 61 oz [1729 g] Wing Loading: Length: Radio: 20.9 oz/ft 2 [63.7 g/dm 2 ] 44.5 in [1130mm] 6 channel

More information

CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use, please carefully read this manual.

CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use, please carefully read this manual. Wing Span:74in/1880mm; Flying Weight:7700-7900g; Wing Area:112sq.dm; Radio:8channels 9-10servos; Length:72in/1829mm; Engine:50CC GAS; CAUTION : this plane is not a toy and should be kept away children

More information

3D EP in / 1000mm. Wing Span Wing Area Flying Weight Fuselage Length. 5 oz / 720g 39 in / 990mm INSTRUCTION MANUAL.

3D EP in / 1000mm. Wing Span Wing Area Flying Weight Fuselage Length. 5 oz / 720g 39 in / 990mm INSTRUCTION MANUAL. ALMOST-READY-TO-FLY INSTRUCTION MANUAL 3D EP Requires : 4-channel radio w/ 4 micro servos, Outrunner Motor KM028300 w/ Propeller Adaptor HW234000 20A brushless ESC, 3 cells.v 200 mah Li - Po battery &

More information

MEMO. No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2. Warranty

MEMO. No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2. Warranty MEMO No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2 Wing Area: 299 sq.in. (19.29 dm ) Weight: 18.9oz. (536.5g) 2 Wing loading: 0.58 oz./sq.ft (27.8g/dm ) Motor: OBL 29/27-07A Warranty

More information

Specifications. *Specifications are subject to change without notice.*

Specifications. *Specifications are subject to change without notice.* INSTRUCTION MANUAL Requires : 4-channel radio w/ 4 micro servos, Ducted Fan Propulsion Unit PL6800010 and Outrunner Motor KM0283110, 30A (burst 35A) brushless ESC, 3 cells 11.1V 15C discharge 2100 mah

More information

Instruction Manual BULLDOG. Wingspan : 1410 mm (55.5in) : 1450 mm (57.1in) : 4900gr gr. Weight. : 6-9 Channel/ 7 servo high torque, 1standard

Instruction Manual BULLDOG. Wingspan : 1410 mm (55.5in) : 1450 mm (57.1in) : 4900gr gr. Weight. : 6-9 Channel/ 7 servo high torque, 1standard Wingspan : 1410 mm (55.5in) Length Weight Radio Engine : 1450 mm (57.1in) : 4900gr - 5600gr : 6-9 Channel/ 7 servo high torque, 1standard : 1.20/ 2 stroke 1.80/ 4 stroke KIT CONTENTS: We have organized

More information

I/C FLIGHT GUIDELINES

I/C FLIGHT GUIDELINES SPECIFICATION - Wingspan: 3500mm (137.8 in) - Length: 1650mm (64.96 in) - Flying weight: 3700-4000 gr - Wing area: 75 dm2 - Wing loading: 49g/dm2 - Wing type: HQ profile - Covering type: Genuine ORACOVER

More information

P-47D THUNDERBOLT. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos. Specifications

P-47D THUNDERBOLT. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos. Specifications INSTRUCTION MANUAL P-47D THUNDERBOLT 1.20 cu. in. displacement 4-stroke Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos Specifications Wing Span Wing Area Flying Weight

More information

0.46 cu. in. displacement 2-stroke cu. in. displacement 4-stroke

0.46 cu. in. displacement 2-stroke cu. in. displacement 4-stroke INSTRUCTION MANUAL FU CORSAIR(A077S) 0.6 cu. in. displacement 2-stroke 0.70-0.81 cu. in. displacement -stroke Requires : 5-channel radio w/ 5 standard servos and 1 low profile retract servo. Wing Span

More information

SebArt professional line

SebArt professional line SebArt professional line PrometheuS 50E ARF ASSEMBLY MANUAL The new PrometheuS 50E ARF was designed by the F3A aerobatic pilot Sebastiano Silvestri and it s the replica of his 2 meter size F3A competition

More information

Katana S 40 SPECIFICATION. Before commencing assembly,please read these instructions thoroughly. This radio control model is not a toy!

Katana S 40 SPECIFICATION. Before commencing assembly,please read these instructions thoroughly. This radio control model is not a toy! efore commencing assembly,please read these instructions thoroughly. Katana S 40 SFETY PRECUTIONS This radio control model is not a toy First-time builders should seek advice from people having building

More information

P-47D THUNDERBOLT cu. in. displacement 4-stroke. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos.

P-47D THUNDERBOLT cu. in. displacement 4-stroke. Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos. INSTRUCTION MANUAL P-7D THUNDERBOLT 1.20 cu. in. displacement -stroke Requires: 6-channel radio w/ 7 standard servos and 2 low profile retract servos Specifications Wing Span Wing Area Flying Weight Fuselage

More information

P-51 MUSTANG G.S cubic inch displacement 2-cycle (Glow) 1.80 cubic inch displacement 4-cycle (Glow)

P-51 MUSTANG G.S cubic inch displacement 2-cycle (Glow) 1.80 cubic inch displacement 4-cycle (Glow) INSTRUCTION MANUAL P-51 MUSTANG G.S. 1.60 cubic inch displacement -cycle (Glow) 1.80 cubic inch displacement 4-cycle (Glow) Requires : 6-channel radio w/ 7 standard servos and low profile retract servos

More information

SebArt professional line

SebArt professional line SebArt professional line Miss UltimateS 50E ARF ASSEMBLY MANUAL The new Miss UltimateS 50E ARF was designed by the F3A aerobatic pilot Sebastiano Silvestri and it s a semi scale version of the real plane

More information

Fei Bau 1/6 th scale F 15-Eagle

Fei Bau 1/6 th scale F 15-Eagle Fei Bau 1/6 th scale F 15-Eagle Developed and written by Luke Cullen The following instructions are developed based on using twin turbines. The ARF kit can be optioned from the factory for either twin

More information

STEP 1 - APPLYING HINGE BEVELS TO FRONT WING, REAR WING, VERTICAL STABILIZER, AND RUDDER FRONT WING (UNDERSIDE) 45 DOUBLE HINGE BEVEL

STEP 1 - APPLYING HINGE BEVELS TO FRONT WING, REAR WING, VERTICAL STABILIZER, AND RUDDER FRONT WING (UNDERSIDE) 45 DOUBLE HINGE BEVEL SkyRaiderv.b WING SPAN: FRONT - 22 in. REAR - 28.5 in. LENGTH: 35.25" WING AREA: 381 sqin. WEIGHT: 19-20oz. (RECOMMENDED) POWER: HACKER A20-20L, 10x3.8 APC PROP, 3S1P 1320mah Lipo 15C, 20A ESC RADIO: 4

More information

FUN-50 ARF ASSEMBLY MANUAL

FUN-50 ARF ASSEMBLY MANUAL FUN-50 ARF ASSEMBLY MANUAL This Manuel is the sole property of Kangke Industrial USA, Inc. Reproducing any part without the consent of Kangke Industrial USA, Inc. is a lawful violation. Kangke Industrial

More information

第 4 页. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. Accessory list for the installation of aileron.

第 4 页. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. Accessory list for the installation of aileron. TopRCModel-USA.com TopRCModel-USA.com 第 3 页 Accessory list for the installation of aileron. 3. Fix the fiber horns to the slots in the aileron with epoxy glue. 1. Sanding the fiber horns. 4. Fix the fiber

More information

UPCOMING EVENTS FOR MAY:

UPCOMING EVENTS FOR MAY: KCAM NEWSLETTER APRIL 2017 KENT COUNTY AERO MODELERS, 657 MAHAN CORNER ROAD, FELTON, DELAWARE 19943 PRESIDENT: ARNIE DISKIN, adiskin@creativedpt.com VICE PRESIDENT: STEWART KITCHEN, stusbaby@msn.com SECRETARY:

More information

COMPOSITE-ARF EUROSPORT MODIFICATIONS

COMPOSITE-ARF EUROSPORT MODIFICATIONS COMPOSITE-ARF EUROSPORT MODIFICATIONS Having supplied these Mod's to many over the months on a oneon-one basis, I thought I would compile a page of all the modifications I have done to the Eurosport for

More information

PIPER J - 3 CUB 26s cu. in. displacement 2-stroke 0.30 cu. in. displacement 4-stroke. Specifications

PIPER J - 3 CUB 26s cu. in. displacement 2-stroke 0.30 cu. in. displacement 4-stroke. Specifications ALMOST-READY-TO-FLY INSTRUCTION MANUAL PIPER J - 3 CUB 6s 0.5-0.3 cu. in. displacement -stroke 0.30 cu. in. displacement -stroke Require s : - channel radio w/ standard servos Wing Span Wing Area Flying

More information

SebArt professional line

SebArt professional line SebArt professional line G-91 PAN EDF ARF ASSEMBLY MANUAL The real plane The Fiat G.91 was an Italian jet fighter aircraft. It entered in operational service with the Italian Air Force in 1961, with the

More information

SIZE.120 OR 30CC SCALE 1:5 ARF

SIZE.120 OR 30CC SCALE 1:5 ARF PC21 PILATUS MK2 SIZE.120 OR 30CC SCALE 1:5 ARF SPECIFICATION - Wingspan: 1772mm (69.72in) - Length: 2019mm (79.5 in) - Flying weight: 6.4-7.2 kg - Wing area: 57.6 dm2 - Wing loading: 113g/dm2 - Wing type:

More information

RVJET Flying wing specially designed for FPV. RangeVideo Wireless Video Solutions

RVJET Flying wing specially designed for FPV. RangeVideo Wireless Video Solutions RVJET Flying wing specially designed for FPV Features: Durable EPO in black or white Variable wing span 1.55m/1.95m Compact during transport (original packing can be used) Specially designed for RVOSD

More information

Assembly and Operating Manual. SPECIFICATION Length inch (640mm) Wing Span inch (705mm) Flying Weight oz (330g)

Assembly and Operating Manual. SPECIFICATION Length inch (640mm) Wing Span inch (705mm) Flying Weight oz (330g) Assembly and Operating Manual SPECIFICATION Length 25.19 inch (640mm) Wing Span 27.76 inch (705mm) Flying Weight 11.64 oz (330g) Dear customer, Assembly and Operating manual VIPER The Radio Control System

More information

Assembly and Operating Manual. 3D cap-232. Specification: *Length: 25-9/10"(655mm) *Wing Span: 29-3/5"(750mm) *Flying Weight: 15-9/10 oz (450g)

Assembly and Operating Manual. 3D cap-232. Specification: *Length: 25-9/10(655mm) *Wing Span: 29-3/5(750mm) *Flying Weight: 15-9/10 oz (450g) Assembly and Operating Manual 3D cap-232 Specification: *Length: 25-9/10"(655mm) *Wing Span: 29-3/5"(750mm) *Flying Weight: 15-9/10 oz (450g) Dear customer, Congratulations on your choice of a factory-assembled

More information

RECOMMENDED MOTOR AND BATTERY SET UP

RECOMMENDED MOTOR AND BATTERY SET UP SPECIFICATION - Wingspan: 2567mm (101in) - Length: 2190mm (86.2 in) - Flying weight: 11-13 kg - Wing area: 101 dm2 - Wing loading: 99g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER -

More information

performance S T O L Installation Instructions Manual No. PSTOL-013 Double Slotted Flaps for Piper PA-18 Series Aircraft

performance S T O L Installation Instructions Manual No. PSTOL-013 Double Slotted Flaps for Piper PA-18 Series Aircraft performance S T O L Installation Instructions Manual No. PSTOL-013 Double Slotted Flaps for Piper PA-18 Series Aircraft 1 This Page Intentionally Left Blank 2 Record of Revisions Rev Level Date Page By

More information

Specifications. * Specifications are subject to change without notice.*

Specifications. * Specifications are subject to change without notice.* INSTRUCTION MANUAL -160 ( A1) ARF ALMOST-READY-TO-FLY 1.60 cubic inch displacement - stroke(glow) Requires: 6- channel radio w/ 7 standard servos and low profile retract servos Wing Span Wing Area Flying

More information

SK-50 ARF ASSEMBLY MANUAL

SK-50 ARF ASSEMBLY MANUAL SK-50 ARF ASSEMBLY MANUAL Kangke Industrial USA, Inc. 65 East Jefryn Blvd. Deer Park NY 11729 http://www.kangkeusa.com E-mail: info@kangkeusa.com Tel: 1-877-203-2377 Fax: 1-631-274-3296 Congratulations!

More information

szd-45 ogar Before commencing assembly, please read these instructions thoroughly. I NSTRUCTI ON M ANUAL Warning! This model is not a toy.

szd-45 ogar Before commencing assembly, please read these instructions thoroughly. I NSTRUCTI ON M ANUAL Warning! This model is not a toy. I NSTRUCTI ON M ANUAL Before commencing assembly, please read these instructions thoroughly. szd-5 ogar Specifications Wing Span: 98.5 in / 2500 mm Wing Area: 667 sq in / 3 sq dm Flying Weight: 8 oz /

More information

SebArt professional line

SebArt professional line SebArt professional line Wind S PRO 2m ARF ASSEMBLY MANUAL The new Wind S PRO ARF was designed by Italy aerobatic pilot, Sebastiano Silvestri. This professional ARF kit is the result of Sebastiano s 20

More information

8mm EPP Acrocub. Instruction Manual. Specifications

8mm EPP Acrocub. Instruction Manual. Specifications 8mm EPP Acrocub Instruction Manual Specifications Wingspan: 34.6 in (880mm) Length: 31.5 in (800mm) Wing Area: 213.9 sq in (13.8sq dm) Flying Weight: Approx. 9oz (270g) Dear Customer, www.valuehobby.com/8mm-epp-acrocub.html

More information

ZODIAC 601 XL. Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1.

ZODIAC 601 XL. Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1. Trim the outboard corner of the front flange of the center spar 6W4-1. Corner should not touch the side of the cabin floor skin 6B10-1. Tape the side skins to the cabin floor skin (area in front of the

More information

Assembly Manual. Version 01/01/2006

Assembly Manual. Version 01/01/2006 Assembly Manual ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr www.adjets.com Version 01/01/2006 INTRODUCTION is our new jet

More information

Albatros CIII 38. R/C Scale Model Instructions

Albatros CIII 38. R/C Scale Model Instructions R/C Scale Model Instructions CONTACT INFORMATION Designed by M.K. Bengtson Manufactured and Distributed by: Bengtson Company e-mail: sales@aerodromerc.com Web Site: www.aerodromerc.com Albatros CIII Thank

More information

Before commencing assembly, please read these instructions thoroughly.

Before commencing assembly, please read these instructions thoroughly. I NSTRUCTI ON M ANUAL Before commencing assembly, please read these instructions thoroughly. Specifications Wing Span: 33 in / 850 mm Wing Area: 299 sq in / 19.3 sq dm Flying Weight: 24 oz / 680 g Fuselage

More information

RECOMMENDED MOTOR AND BATTERY SET UP

RECOMMENDED MOTOR AND BATTERY SET UP SPECIFICATION - Wingspan: 1410mm (55.5 in) - Length: 1278mm (50.3 in) - Flying weight: 3.2-3.4 kg - Wing area: 41.3 dm2 - Wing loading: 75g/dm2 - Wing type: Naca airfoils - Covering type: Genuine ORACOVER

More information

CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use, please carefully read this manual.

CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use, please carefully read this manual. Wing Span:86.6in/2200mm; Flying Weight:6000g; Wing Area:94sq.dm; Radio:6Channel 6Servos; Length:82.7in/2100mm; Engine:50CC Gas CAUTION : this plane is not a toy and should be kept away children under 16

More information

SebArt professional line

SebArt professional line SebArt professional line Wind S 50E ARF ASSEMBLY MANUAL The new Wind S 50E ARF was designed by Italy aerobatic pilot Sebastiano Silvestri, it is the replica of his 2 meter size F3A competition airplane,

More information

RADIO CONTROL MODEL HURRICANE

RADIO CONTROL MODEL HURRICANE RADIO CONTROL MODEL VQAA040G VQAA040B HURRINE Almost ready to fly SPECIFITIONS Wingspan...63 in. / 161cm Length...50 in. / 129cm Engine...50~60 2T / 70~90 4T Or Electric equivalent. RC Functions: Motor

More information

51in Aerobatic Series Sukhoi SU-26M Almost-Ready-to-Fly. Instruction Manual. Specifications

51in Aerobatic Series Sukhoi SU-26M Almost-Ready-to-Fly. Instruction Manual. Specifications 51in Aerobatic Series Sukhoi SU-26M Almost-Ready-to-Fly Instruction Manual Specifications Wingspan: 51.2 in (1300mm) Length: 51.2 in (1300mm) Wing Area: 581 sq in (37.5sq dm) Flying Weight: 3.5 lb (1600g)

More information

European Aviation Safety Agency

European Aviation Safety Agency Page 1 of 7 European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET EASA.A.045 Type Certificate Holder: Blanik Aircraft CZ s.r.o. Karolinská 661/4 186 00 Praha 8 For models: Issue 05: 10 January

More information

Requires: 50cc gasoline engine, 4-channel radio w/ 6 high torque servos.

Requires: 50cc gasoline engine, 4-channel radio w/ 6 high torque servos. INSTRUCTION MANUAL (A037) Requires: 50cc gasoline engine, -channel radio w/ 6 high torque servos. Specifications Wing Span Wing Area Flying Weight Fuselage Length 118 in / 3000 mm 1990 sq in / 18 sq dm

More information

Curtiss Canuck. R/C Scale Model Instructions. CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker

Curtiss Canuck. R/C Scale Model Instructions. CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker Curtiss Canuck 41 1/2 Curtiss Canuck R/C Scale Model Instructions CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker Manufactured and Distributed by: Bengtson

More information

2) Bilateral air intakes allows for reliable ventilation,keep the edf perfect blend in the side of body.

2) Bilateral air intakes allows for reliable ventilation,keep the edf perfect blend in the side of body. INSTRUCTIONS FOR ZEPHYR V-70 EDF-EPO Warning: This aircraft is a hobby grade product, only for people of 14 years of age or above. Please read and understand all instructions before opeating. Features:

More information

Issue 0/Rev.00-0 Aug Page /

Issue 0/Rev.00-0 Aug Page / Issue 0/Rev.00-0 Aug 0 4 06 4 4 4 35 6 09 3 05 0 0 Page /5 04 08 9 8 Issue 0/Rev.00-0 Aug 0 3 40 3 33 6 35 34 34 33 30 3 0 3 Page /5 3 6 4 40 Issue 0/Rev.00-0 Aug 0 65 6 40 48 36 06 08 5 69 66 0 99 5 55

More information

Instruction Manual book

Instruction Manual book book ITEM CODE:BH 139 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,140 mm 44.88 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 mini servos+ 3servos Retracts (FUTABA S3170G) EDF:

More information

Aircraft Design: A Systems Engineering Approach, M. Sadraey, Wiley, 2012 Chapter 11 Aircraft Weight Distribution Tables

Aircraft Design: A Systems Engineering Approach, M. Sadraey, Wiley, 2012 Chapter 11 Aircraft Weight Distribution Tables Aircraft Design: A Systems Engineering Approach, M. Sadraey, Wiley, 01 Chapter 11 Aircraft Weight Distribution Tables No Component group Elements Weight X cg Y cg Z cg 1 Wing 1.1. Wing main structure 1..

More information

SebArt professional line

SebArt professional line SebArt professional line EDGE 540S 50E ARF ASSEMBLY MANUAL The Edge 540S 50E ARF was designed by the 15 times Italian Champion Sebastiano Silvestri, vice-european Champion and 2 time F.A.I World Cup winner

More information

PITTS 12 R/C SPORT-SCALE AIRCRAFT ASSEMBLY AND INSTRUCTION MANUAL. Copyright Century UK Limited 2012

PITTS 12 R/C SPORT-SCALE AIRCRAFT ASSEMBLY AND INSTRUCTION MANUAL. Copyright Century UK Limited 2012 PITTS 12 R/C SPORT-SCALE AIRCRAFT ASSEMBLY AND INSTRUCTION MANUAL 1 Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for use by beginners. It should not

More information

50CC PAULISTINHA. Before commencing assembly, please read these instructions thoroughly.

50CC PAULISTINHA. Before commencing assembly, please read these instructions thoroughly. I NSTRUCTI ON M ANUAL Before commencing assembly, please read these instructions thoroughly. 50CC PAULISTINHA (GA065) Specifications Wing Span: 118 in / 3000 mm Wing Area: 1990 sq in / 18 sq dm Flying

More information

Supplemental Instructions for Walkera F-16

Supplemental Instructions for Walkera F-16 Supplemental Instructions for Walkera F-16 Step 1 the instructions show a brushed motor setup and indicate you should solder 3 capacitors to the motor terminals. The kit actually contains a brushless motor,

More information