HYDRAULIC EFFICIENCY. DAB PUMPS reserves the right to make modifications without notice. 199
|
|
|
- Noel James
- 6 years ago
- Views:
Transcription
1 . 199
2 GENERAL INFORMATION With the aim of defining a comparable performance threshold value among all water pumps present on the market, an index has been created which considers the size of the pump, its specific speed and rotation speed: the MEI (Minimum Efficiency Index). The regulation applies to centrifugal pumps for pumping clean water included in these product categories: - Pumps with axial intake with support (ESOB) - Pumps with monobloc horizontal axial intake (ESCC) - Pumps with monobloc in-line axial intake (ESCCI) - Multistage vertical pumps (MS-V) - Multistage submerged pumps (MSS) MEI represents a dimensionless indicator for hydraulic performance and is a measurement of the sizing of the pump with respect to its performance. The higher the MEI value, the better the sizing of the pump with respect to its performance and the lower the yearly energy consumption due to use of the pump. The upper limit of the MEI values is theoretically open, and depends only on physical and technological limits. The minimum efficiency index (MEI) is based on the maximum diameter of the impeller. Multistage submerged water pumps must undergo tests in a version with 9 stages. The reference value for the most efficient water pumps is MEI The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller diameter. The trimming of the impeller adapts the pump to a fixed work point, with a consequent lower energy consumption. The operation of this water pump with variable operating points may be more efficient and economic if controlled, for example, by means of a variable speed motor which adapts pump operation to the system. You can find information on reference efficiency at the address: or contact our sales network. The efficiency graphs for MEI=0.7 and MEI=0.4 for the different types of pumps are available on the site: CS4A-12 M 35,83% 38,59% 38,19% 12 CS4A-12 T 39,64% 42,13% 41,85% CS4A-8 M 8 36% 39,50% 38,80% CS4A-18 M 38,60% 43,40% 43% 18 CS4A-18 T 39,00% 43,50% 43,00% CS4A-25 M 36% 40,80% 40,10% 25 CS4A-25 T 38% 41% 40,90% CS4A-36 M 38,30% 41% 39,20% 36 CS4A-36 T 39% 43,50% 43% CS4B-12 M 53,81% 59,17% 58,42% CS4B-12 T 12 54,86% 57% 56,41% CS4B-5 M 5 57% 60,10% 59,50% CS4B-8 M 45% 50% 48% CS4B-8 T 8 55% 58,40% 58% CS4B-16 M 43,50% 48,20% 47% CS4B-16 T 16 46,20% 47% 46,80% CS4B-24 M 46,20% 49,20% 48% CS4B-24 T 24 51,80% 56% 54% 200
3 CS4C-9 M 66,40% 67,87% 66,78% CS4C-9 T 9 66,40% 67,87% 66,78% CS4C-6 M 59% 61,10% 58% CS4C-6 T 6 64% 66% 65,80% CS4C-13 M 56,50% 61% 58,80% CS4C-13 T 13 57% 60% 59% CS4C-19 M 55% 60% 59% CS4C-19 T 19 61,50% 65,50% 65% CS4D-13 M 64% 66,74% 66,32% CS4D-13 T 13 71,70% 75,77% 75,33% CS4D-4 M 63,50% 66% 65% CS4D-4 T 4 72,50% 74% 72% CS4D-6 M 64,20% 65,80% 65% CS4D-6 T 6 70,50% 74,50% 74% CS4D-8 M 64% 68,30% 67% CS4D-8 T 8 64% 68% 67% S4A-12 M 12 42,53% 46,90% 46,10% S4A-8 M 8 32,20% 34,40% 34% S4A-18 M 43% 46,80% 46% S4A-18 T 18 45% 47% 46,50% S4A-25 M 40,50% 47,40% 46,90% 25 S4A-25 T 32,30% 33,50% 33% S4A-36 M 34% 36% 35,80% S4A-36 T 36 41% 42% 40,90% S4A-50 M 41,50% 42% 41% S4A-50 T 50 38,50% 39% 38,70% S4B-12 M 38,50% 40,60% 39% S4B-12 T 12 40,85% 42,88% 42,51% S4B-5 M 5 46,50% 51% 50,50% S4B-8 M 8 37,20% 42% 41% S4B-16 M 43% 46,10% 45% S4B-16 T 16 43,75% 48% 46,50% S4B-24 M 41,20% 43,50% 43,20% 24 S4B-24 T 42% 44,80% 44% S4B-32 M 49% 50% 49% S4B-32 T 32 51% 54% 53% S4B-40 M 48% 51,70% 50,60% S4B-40 T 40 48,30% 51,70% 50,30% S4B-48 M 48,50% 51% 50% S4B-48 T 48 48,00% 52% 51% 201
4 S4C-9 M 64,55% 67,22% 66,95% S4C-9 T 9 65,57% 67,13% 66,96% S4C-6 M 6 51% 55% 52,50% S4C-13 M 54% 58,70% 58% S4C-13 T 13 56% 60% 59% S4C-19 M 52% 56% 56,50% S4C-19 T 19 50,30% 54% 53% S4C-25 M 58% 62% 61% S4C-25 T 25 58,80% 62% 57% S4C-32 M 60% 63% 62,70% S4C-32 T 32 57,50% 59% 58% S4C-39 M 57% 60% 59,35 S4C-39 T 39 54,20% 57,40% 56,70% S4C-45 T 45 56% 58,60% 58% S4C-51 T 51 56,80% 60,50% 60% S4D-13 M 13 55,18% 59,66% 58,70% S4D-13 T 13 57,95% 62,15% 61,22% S4D-4 M 4 48,60% 53% 52,60% S4D-6 M 49,90% 54% 53% S4D-6 T 6 49,60% 53,50% 52,20% S4D-8 M 63,50% 67,20% 65% S4D-8 T 8 65,30% 69,10% 68% S4D-17 M 66% 68,35% 69,10% S4D-17 T 17 64% 68% 67,60% S4D-21 M 68% 71,80% 71% S4D-21 T 21 65% 68,30% 67,60% S4D-25 M 63% 67% 66,70% S4D-25 T 25 62% 64% 63,50% S4D-29 T 29 60% 64,70% 64% S4D-34 T 34 61% 65,60% 64,80% S4D-38 T 38 59,50% 63,30% 62% S4D-45 T 45 58,50% 64,40% 63% S4E-12 M 60% 64,05% 62,93% S4E-12 T 12 60,06% 63,61% 62,87% S4E-6 M 56% 60% 59% S4E-6 T 6 58,50% 60,00% 59% S4E-8 M 58,00% 61,40% 60% S4E-8 T 8 63% 66,70% 65,50% S4E-17 M 56,40% 62% 60,40% 17 S4E-17 T 56% 60% 58,60% S4E-20 T 20 55,80% 60,20% 58,50% S4E-23 T 23 56,70% 60,10% 59,50% S4E-27 T 27 57% 61,90% 58,70% S4E-31 T 31 55,50% 60% 58% S4E-36 T 36 53,50% 56,20% 54% S4E-42 T 42 53% 58% 55,50% 202
5 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 SS6A/ ,01 70,60 69,74 203
6 SS6B/ ,72 74,52 73,68 SS6B/7 7 70,72 74,52 73,68 SS6B/8 8 70,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 SS6B/ ,72 74,52 73,68 204
7 SS6C/9 9 72,03 76,10 75,41 SS6C/4 4 71,03 75,10 74,41 SS6C/5 5 72,03 76,10 75,41 SS6C/6 6 72,03 76,10 75,41 SS6C/7 7 72,03 76,10 75,41 SS6C/8 8 72,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 SS6C/ ,03 76,10 75,41 205
8 SS6D/9 9 72,67 76,30 75,42 SS6D/3 3 70,67 74,30 73,42 SS6D/4 4 71,67 75,30 74,42 SS6D/5 5 72,67 76,30 75,42 SS6D/6 6 72,67 76,30 75,42 SS6D/7 7 72,67 76,30 75,42 SS6D/8 8 72,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 SS6D/ ,67 76,30 75,42 206
9 SS6E/9 9 72,40 77,30 75,51 SS6E/2 2 69,40 74,30 72,51 SS6E/3 3 70,40 75,30 73,51 SS6E/4 4 71,40 76,30 74,51 SS6E/5 5 72,40 77,30 75,51 SS6E/6 6 72,40 77,30 75,51 SS6E/7 7 72,40 77,30 75,51 SS6E/8 8 72,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 SS6E/ ,40 77,30 75,51 207
HYDRAULIC EFFICIENCY EU 547/2012 REGULATION - MEI. DAB PUMPS reserves the right to make modifications without notice. 241
241 GENERAL INFORMATION The MEI index (Minimum Efficiency Index) was issued with the objective of defining a performance threshold value applicable to all the water pumps found on the market. The MEI index
SUBMERSIBLE PUMPS AND MOTORS PRODUCT OVERVIEW
SUBMERSIBLE PUMPS AND MOTORS PRODUCT OVERVIEW powered by DAB AND TESLA MESTRINO (PD) SAN GERMANO DEI BERICI (VI) With over 2 million units produced every year, DAB s electronic pumps are synonymous with
DABPUMPS.COM SUBMERSIBLE PUMPS AND MOTORS PRODUCT OVERVIEW
DABPUMPS.COM SUBMERSIBLE PUMPS AND MOTORS PRODUCT OVERVIEW DAB AND TESLA MESTRINO (PD) SAN GERMANO DEI BERICI (VI) With over 2 million units produced every year, DAB s electronic pumps are synonymous
Shift Solenoid B (SSB) and Shift Solenoid D (SSD) Inverse Proportional VFS 2761
Item Description 1 Shift Solenoid A (SSA) Variable Force Solenoid (VFS) 2 Shift Solenoid C (SSC) VFS SSB and SSD use inverse proportional operation. As the current from the PCM decreases, the pressure
Shift Solenoids (SS)
2011 Mustang Report a problem with this article 307-01 Automatic Transaxle/Transmission 6R80 2011 Mustang IN-VEHICLE REPAIR Procedure revision date: 02/23/2011 Shift Solenoids (SS) Material Item Motorcraft
Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
Automatic Transmission 5R44E and 5R55E
307-01-1 Automatic Transmission 5R44E and 5R55E 307-01-1 IN-VEHICLE REPAIR Main Control Valve Body Special Tool(s) Aligner, Valve Body 307-333 (T95L-70010-B) Aligner, Valve Body 307-334 (T95L-70010-C)
Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
SECTION Automatic Transaxle/Transmission 6R80
307-01-i Automatic Transaxle/Transmission 6R80 307-01-i SECTION 307-01 Automatic Transaxle/Transmission 6R80 CONTENTS PAGE Main Control... 307-01-2 307-01-2 Automatic Transaxle/Transmission 6R80 Main Control
CombiNorm INSTRUCTION MANUAL. Horizontal centrifugal pump according to EN 733 (DIN 24255)
INSTRUCTION MANUAL CombiNorm Horizontal centrifugal pump according to EN 733 (DIN 24255) CN/EN (1710) 6.7 Orginal instructions Read and understand this manual prior to operating or servicing this product
CombiBloc INSTRUCTION MANUAL. Horizontal centrifugal monobloc pump
INSTRUCTION MANUAL CombiBloc Horizontal centrifugal monobloc pump CB/EN (1711) 6.7 Orginal instructions Read and understand this manual prior to operating or servicing this product EC Declaration of conformity
DIAGNOSIS AND TESTING
307-01-1 Automatic Transaxle/Transmission 307-01-1 DIAGNOSIS AND TESTING Transmission Connector Layouts Connector Reference and Terminal Readings Powertrain Control module (PCM) 1 Pressure control solenoid
CombiLineBloc INSTRUCTION MANUAL. In-line circulation pump in block execution
INSTRUCTION MANUAL CombiLineBloc In-line circulation pump in block execution CLB/EN (1501) 6.5 Orginal instructions Read and understand this manual prior to operating or servicing this product EC Declaration
DIAGNOSIS AND TESTING
307-01-1 Automatic Transmission 5R55S 307-01-1 DIAGNOSIS AND TESTING Transmission Connector Layouts Connector Reference and Terminal Readings Powertrain Control Module (PCM) C175b 1 Shift Solenoid A (SSA)
Page 1 of 10 SECTION 307-01: Automatic Transaxle/Transmission 2005 Focus Workshop Manual ASSEMBLY Procedure revision date: 04/04/2008 Transaxle Printable View (2476 KB) Special Tool(s) Alignment Tool,
Vertical multi-stage pumps
MK Vertical multi-stage pumps PERFORMANCE RANGE Flow rate up to 180 l/min (10.8 m³/h) Head up to 103 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +40 C Ambient
Data sheet: Wilo-Multivert MVI 205 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 5 (3~4 V, EPDM, PN 16) Pump curves 4 Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 17 Max. ambient temperature T 4 C P [kw] NPSH [m] H[m] 14 16 14 1 1
Data sheet: Wilo-Multivert MVI 404 (1~230 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI (1~3 V, EPDM, PN 16) Pump curves Wilo-Multivert-MVI - 5 Hz Power Fluid temperature T -15...+1 C 18 16 Max. ambient temperature T C 1 1 Maximum operating pressure p max 16
Data sheet: Wilo-Multivert MVI 805 (3~400 V, EPDM, PN 16)
Data sheet: Wilo-Multivert MVI 8 (~ V, EPDM, PN ) Pump curves 89 8 Wilo-Multivert-MVI 8-89 Hz Power Fluid temperature T -...+ C NPSH [m] H[m] 8 8 8 8 88 8 8 8 8 8 8 8 8 η p NPSH 8 8 [l/s] 89 η p [%] Max.
SS7 SUBMERSIBLE ELECTRIC PUMPS 7
SS7 TECHNICAL DATA Performance range: flow up to 110 m3/h and max head of 423 m Max. quantity of sand/silt: 50g/m3 Max. ambient temperature: 30 C (50 C available on request) Outlet connection diameter
VERTICAL SERIES BOOSTER PUMPS
VERTICAL SERIES BOOSTER PUMPS Stainless Steel Vertical Multistage Centrifugal Pump The Webtrol V Series Vertical multistage pumps offer technically advanced designs to meet market demands including hot
VERTICAL SERIES BOOSTER PUMPS
VERTICAL SERIES BOOSTER PUMPS Stainless Steel Vertical Multistage Centrifugal Pump The Webtrol V Series Vertical multistage pumps offer technically advanced designs to meet market demands including hot
CRN1S-30 A-P-G-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CRN1S-3 A-P-G-E-HQQE 1x22/24 5HZ Grundfos Pump 96533335 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96533335/crn-1s-3-a-p-g-e-hqqe.html
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
Company name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017
Position Qty. Description 1 CM5-4 S-R-I-E-AQQE Product No.: 98482185 Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The pump
LPCD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 204 PERFORMANCE CURVE 50 205 PERFORMANCE CURVE 65 207 PERFORMANCE CURVE 80 208 PERFORMANCE
CM25-1 A-R-G-E-AQQE C-A-A-N
GRUNDFOS DATA BOOKLET CM25-1 A-R-G-E-AQQE C-A-A-N Grundfos Pump 97516666 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97516666/cm25-1-a-r-g-e-aqqe.html
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 LPC4 32 205 LPC4 40 206 LPC4 50 211 LPC4 65 215 LPC4 80 219 LPC4 100 222 LPC4 125 225 LPC4 150 226 - CONSTRUCTIONS
CRN15-09 A-P-G-V-HQQV 3x400/ HZ
GRUNDFOS DATA BOOKLET CRN15-9 A-P-G-V-HQQV 3x/69 5 HZ Grundfos Pump 9652 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9652/crn-15-9-a-p-g-v-hqqv.html
CM5-11 A-R-G-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-11 A-R-G-E-AQQE F-A-A-N Grundfos Pump 96935476 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/96935476/cm5-11-a-r-g-e-aqqe.html
U660E, U660F, U760E, U760F
Transmission: Subject: Application: Issue Date: Technical Bulletin #1632 U660E, U660F, U760E, U760F Delayed or Harsh Reverse Engagements Toyota August, 2014 U660E, U660F, U760E, U760F Delayed or Harsh
ALL TERRAIN CRANE AR-5500M
ALL TERRAIN CRANE AR AR-5500M (ESP Boom and Fully Automatic Luffiing Jib) JAPANESE SPECIFICATIONS These specifications are for the optional ESP boom and fully automatic luffing jib for the AR-5500M type
Set 2 Mini Pust APB50B
GRUNDFOS DATA BOOKLET Set 2 Mini Pust APB5B.5.11.1 Grundfos Pump 97626581 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97626581/cm5--a-r-i-e-aqqe.html
CM15-1 A-R-I-V-AQQV C-A-A-N
GRUNDFOS DATA BOOKLET CM15-1 A-R-I-V-AQQV C-A-A-N Grundfos Pump 97515 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97515/cm15-1-a-r-i-v-aqqv.html
MMD. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 65-250 204 PERFORMANCE CURVE 80-160 205 PERFORMANCE CURVE 80-200 206 PERFORMANCE CURVE 80-250
CombiLine - CombiBlocHorti
INSTRUCTION MANUAL CombiLine - CombiBlocHorti Circulation pumps CL-CBH/EN (1212) 7.5 Orginal instructions Read and understand this manual prior to operating or servicing this product EC Declaration of
50 Hz. SH Series CENTRIFUGAL ELECTRIC PUMPS MADE OF AISI 316 STAINLESS STEEL IN COMPLIANCE WITH EN 733. ErP 2009/125/EC. Cod.
50 Hz SH Series CENTRIFUGAL ELECTRIC PUMPS MADE OF AISI 316 STAINLESS STEEL IN COMPLIANCE WITH EN 733 ErP 2009/125/EC Cod. 191002941 Rev ev.d.d Ed.08/2013 SH SERIES HYDRAULIC PERFORMANCE RANGE AT 50 Hz
LPC. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 32 205 40 206 50 210 65 213 80 216 100 218 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 302 - DIMENSIONS
MMD 4 Poles. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE MMD4 32-250 205 PERFORMANCE CURVE MMD4 40-250 206 PERFORMANCE CURVE MMD4 50-250 207 PERFORMANCE
ULTRA 316 Stainless Steel FIXED FORCE RANGE. Force N. Give your application the professional look & performance...
FIXED RANGE 50 to 0N ULRA 316 FIXED RANGE Fixed Force Range he Fixed Force Strut Range can be supplied to any pressure within the range listed below for the type of strut. he threaded ends allow a large
CRI10-14 A-FGJ-I-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRI1-1 A-FGJ-I-E-HQQE 3xD 5 HZ Grundfos Pump 96512 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1/96512/cri-1-1-a-fgj-i-e-hqqe.html
CM10-3 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-3 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686946 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686946/cm1-3-a-r-a-e-avbe.html
Series description: Wilo-Sub TWI 6-..-B
Series description: Wilo-Sub TWI 6-..-B Design Submersible pump, multistage Application For water and potable water supply from boreholes and rainwater storage tanks Process water supply For municipal
GRUNDFOS DATA BOOKLET SP A, SP. Submersible pumps, motors and accessories. 50 Hz
GRUNDFOS DATA BOOKLET SP A, SP Submersible pumps, motors and accessories 5 Hz SP A, SP Table of contents 1. General description 3 Performance range 3 Minimum efficiency index 4 Type key 4 Applications
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 2 205 PERFORMANCE CURVE 4 206 PERFORMANCE CURVE 7 207 PERFORMANCE
EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPC 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS LPC4 32 LPC4 40 LPC4 50 LPC4 65 LPC4 80 LPC4 100 LPC4 125 LPC4 150 - CONSTRUCTIONS SECTIONAL
50 Hz. Z612, Z616, Z622 Z631, Z646, Z660 Series 6 SUBMERSIBLE ELECTRIC PUMPS. ErP 2009/125/EC
5 Hz Z612, Z616, Z622 Z631, Z646, Z66 Series 6 SUBMERSIBLE ELECTRIC PUMPS ErP 29/125/EC Cod. 1915991 Rev. D Ed.9/217 CONTENTS Hydraulic performance range...4 Series Specifications...5 Table of Materials...7
GW (Kg) Outlet (in) Outline (mm)
JiLu Solar Pumps Systems Our technology is from Institute of Plasma Physics Chinese Academy of Sciences; We research &development and product the Brushless DC Motor; We research & development and product
EBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR
EBARA LPCD 4-POLIGA CENTRIFUGALA PUMPAR CONTENTS - SPECIFICATIONS SELECTION CHART TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE LPCD4 40 PERFORMANCE CURVE LPCD4 50 PERFORMANCE CURVE LPCD4 65 PERFORMANCE
HRC Fuse Links Low Voltage Industrial SAFECLIP. NH DIN Standard RED SPOT / SAFECLIP / NH
GE Power Controls HRC Fuse Links Low Voltage Industrial RED SPOT Standard RED SPOT 400 Series RED SPOT / SAFECLIP / NH SAFECLIP NH DIN Standard RED SPOT / SAFECLIP / NH RED SPOT / SAFECLIP / NH Low Voltage
- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
Switch Hub Module 54.11
Switch Hub Module 54.11 General Information 050 General Information The Switch Hub Module (SHM) is a required module of the vehicle electrical system, and acts as a slave to the Bulkhead Module (see Section
ELECTRIC SUBMERSIBLE MULTI-STAGE CENTRIFUGAL PUMP - 6 COMPLETE WITH MOTOR
OCCI SA EECTRIC SUBMERSIBE MUTI-STAGE CETRIFUGA UM - 6 COMETE WIT MOTOR ITEGRATED CECK VAVE SA submersible pumps comprise a multi-stage pump unit coupled directly to a submersible. Ideal for lifting from
Diagnostic Trouble Code (DTC) Charts
SECTION 307-01: Automatic Transaxle/Transmission 5R55S 2009 Mustang Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 06/30/2009 Diagnostic Trouble Code (DTC) Charts DTC Chart **May also be
CM3-11 A-R-G-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM3-11 A-R-G-E-AQQE F-A-A-N Grundfos pump 96935448 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/96935448/cm3-11-a-r-g-e-aqqe.html
Rosemount 8750WA Magnetic Flowmeter System For Water and Wastewater Industries
Product Data Sheet January 214 813-1-475, Rev FA Rosemount 875WA Magnetic Flowmeter System For Water and Wastewater Industries THE 875WA MAGNETIC FLOWMETER Rosemount reliability in a customized offering
CRT 2-4 A-P-A-E-AUUE 055kW 400Y 50Hz
GRUNDFOS DATA BOOKLET CRT 2-4 A-P-A-E-AUUE 55kW 4Y Hz Grundfos Pump 9633 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt2/9633/crt-2-4-a-p-a-e-auue.html
Data sheet: Wilo-CronoLine-IL 125/210-5,5/4
Data sheet: Wilo-CronoLine-IL 15/1-5,5/ Pump curves -pole, 5 Hz H[m] 18 16 1 1 1 8 6 P [kw] 8 1 16 6 Qmin IL 15/-5,5/ IL 15/1-5,5/ IL 15/19-/ Wilo-CronoLine-IL 15/ - Wilo-CronoLine-IL 15/19 IL 15/-7,5/
CRK 2-60/6 AWA-BUBV 075KW 3X400V 50HZ
GRUNDFOS DATA BOOKLET CRK 2-6/6 AWA-BUBV 75KW 3X4V 5HZ Grundfos Pump 49716 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/49716/crk-2-6-6-a-w-a-auuv.html
MARINE & OFFSHORE PUMP SOLUTIONS PROVEN TECHNOLOGY
MARINE & OFFSHORE PUMP SOLUTIONS PROVEN TECHNOLOGY DESMI Centrifugal Pumps (Vertical Pumps) DESMI centrifugal pumps are used as cooling, ballast, fire, and bilge pumps for fresh as well as seawater. The
Data sheet: Wilo-CronoLine-IL 65/160-5,5/2
Data sheet: Wilo-CronoLine-IL 65/16-5,5/2 Pump curves 2-pole, 5 Hz H[m] 45 4 35S 3 25 2 15 1 5 P 2 [kw] 12 2 4 6 8 1 Q[m³/h] 8 4 Qmin IL 65/16-5,5/2 IL 65/17-11/2 IL 65/15-5,5/2 Wilo-CronoLine-IL 65/17
CM1-6 A-R-I-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM1-6 A-R-I-E-AQQE F-A-A-N Grundfos Pump 97515122 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97515122/cm1-6-a-r-i-e-aqqe.html
High pressure centrifugal pumps
Series description H[ft] 5 5 4 8 Wilo-Multivert-MVIS 6 Hz - North America Q[m³/h] H[m] 5 4 MVIS 5 MVIS MVIS 5 5 4 6Q[US g.p.m.] 8 6 Pump series Wilo-Multivert MVIS 5..,.., 5.. Design Non-self priming multistage
Pleuger Electrical Submersible Pumps and Water-Filled Motors
Electrical Submersible Pumps and Water-Filled Motors Experience In Motion Experience In Motion Trusted Supplier of Choice for Water Resources For more than a century and a half, Flowserve has been in the
CX420 (MS-1453) Assembly Guide
CX420 (MS-1453) Assembly Guide 1 LCD MODULE ASSY 2 UPPER CASE ASSY 3 LOWER CASE ASSY 4 ASSEMBLE UPPER CASE AND LOWER CASE 5 KEYBOARD 6 THERMAL-KIT CPU DRAM 7 ODD MODULE 8 HDD MODULE 9 BOTTOM DOOR ASSY
Data sheet: Wilo-CronoLine-IL 80/145-1,1/4
Data sheet: Wilo-CronoLine-IL 8/145-1,1/4 Pump curves 4-pole, 5 Hz H[m] 12 1 8 6 4 2 2 4 6 8 1 5 1 15 2 25 3 P 2 [kw] 2, 1,5 Ø 156 1, Ø 144,5 Ø 133 2 4 6 8 1 η p[%] Qmin IL 8/17-2,2/4 IL 8/16-1,5/4 IL
Data sheet: Wilo-CronoLine-IL 50/120-2,2/2
Data sheet: Wilo-CronoLine-IL 5/12-2,2/2 Pump curves 2-pole, 5 Hz H[m] 28 24 2 Qmin IL 5/14-3/2 IL 5/13-3/2 Wilo-CronoLine-IL 5/14 - Wilo-CronoLine-IL 5/11 IL 5/14-4/2 Approved fluids (other fluids on
Data sheet: Wilo-CronoLine-IL 50/200-1,5/4
Data sheet: Wilo-CronoLine-IL 5/2-1,5/4 Pump curves 4-pole, 5 Hz H[m] 18 16 14 12 1 8 6 4 2 1 2 3 4 5 4 8 12 Q[l/s] P 2 [kw] Ø 28 1,5 Ø 197 1,,5 1 2 3 4 5 η p[%] Qmin Wilo-CronoLine-IL 5/22 - Wilo-CronoLine-IL
Data sheet: Wilo-CronoLine-IL 65/130-4/2
Data sheet: Wilo-CronoLine-IL 65/13-4/2 Pump curves 2-pole, 5 Hz H[m] 32 28 24 I 2 I 16 12 8 4 2 4 6 8 1 5 1 15 2 25 3 Q[l/s] P 2 [kw] Ø 14 6 Ø 127 4L Ø 117 2 Ø 18 2 4 6 8 1 η p[%] Qmin IL 65/14-5,5/2
GOVERNMENT GAZETTE REPUBLIC OF NAMIBIA
c N$0.94 GOVERNMENT GAZETTE OF THE REPUBLIC OF NAMIBIA WINDHOEK - 30 December 1997 CONTENTS Page GOVERNMENT NOTICE No. 283 Promulgation or Road Traffic Amendment Act, 1997 (Act No. 18 of 1997), of the
CM10-3 A-R-G-V-AQQV F-A-A-N
GRUNDFOS DATA BOOKLET CM10-3 A-R-G-V-AQQV F-A-A-N Grundfos pump 96806984 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/96806984/cm10-3-a-r-g-v-aqqv.html
CRN5-8 A-P-G-V-HQQV 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-8 A-P-G-V-HQQV 3x23/4 5HZ Grundfos Pump 96517266 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn5/96517266/crn-5-8-a-p-g-v-hqqv.html
CM5-9 A-R-I-E-AQQE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-9 A-R-I-E-AQQE F-A-A-N Grundfos pump 97571954 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/97571954/cm5-9-a-r-i-e-aqqe.html
DIAGNOSIS AND TESTING
307-01-1 Automatic Transaxle/Transmission 307-01-1 DIAGNOSIS AND TESTING Diagnostic Trouble Code Charts Diagnostic Trouble Code Chart P0102, MAF MAF concerns MAF system High/low EPC REFER to the P0103,
Technical Data Sheet. British Standards Compliant. TECHNICAL DATA SHEET System 160 (British Standards)
Technical Data Sheet British Standards Compliant Mass 10 System 160 Mass 25 Mass 50 MAT 75 / 125 Superprop Hydraulics Quickbridge MU Falsework MU Bridging Compact Bridging BarrierGuard 800 Instrumentation
CRI1S-25 A-P-I-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CRI1S-25 A-P-I-E-HQQE 1x22/24 HZ Grundfos Pump 9654847 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri1s/9654847/cri-1s-25-a-p-i-e-hqqe.html
CM5-5 A-R-A-E-AVBE F-A-A-N
GRUNDFOS DATA BOOKLET CM5-5 A-R-A-E-AVBE F-A-A-N Grundfos Pump 9686818 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cmbasis/9686818/cm5-5-a-r-a-e-avbe.html
Data sheet: Wilo-CronoLine-IL 100/250-5,5/4
Data sheet: Wilo-CronoLine-IL 1/25-5,5/ Pump curves -pole, 5 Hz H[m] 2 2 16 Qmin IL 1/25-5,5/ IL 1/26-7,5/ Wilo-CronoLine-IL 1/27 - Wilo-CronoLine-IL 1/25 IL 1/27-11/ IL 1/26-11/ Approved fluids (other
CRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html
Data sheet: Wilo-CronoLine-IL 40/220-1,5/4
Data sheet: Wilo-CronoLine-IL 4/22-1,5/4 Pump curves 4-pole, 5 Hz H[m] 2 18 16 14 12 1 8 6 4 2 P 2 [kw] 5 1 15 2 25 1 2 3 4 5 6 7 8 1,2 Ø 22,8,4 5 1 15 2 25 η p[%] 6 4 2 Qmin 5 1 15 2 25 Dimension drawing
Our technology. Your success. Pumps n Valves n Service. Marine pumps
Our technology. Your success. Pumps n Valves n Service Marine pumps 02 Presentation KSB, as pumping equipment designer and manufacturer, is considered as a worldwide supplier for quality and reliability
27 E. Front wheel drive. 1. Transmission Description (Ford Focus 2000 only) 4 4 Speed Transmission F
1. Transmission Description (Ford Focus 2000 only) 4 4 Speed Transmission F Front wheel drive 27 E Maximum input torque after torque converter: 270 Lb-ft (365 N-m) Fully Electronic control Note: Mazda
Page - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
Fan coil unit NBS 100/150
Fan coil unit /150 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...3
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
4WN. EBARA PUMPS EUROPE S.p.A. SUBMERSIBLE MULTISTAGE PUMPS. Pag
CONTENTS Pag - SPECIFICATIONS 200 PUMP SPECIFICATION 200 MOTOR SPECIFICATION 201 SECELTION CHART 202-203 TYPE KEY AND CURVES SPECIFICATIONS 204-205 PERFORMANCE CURVE 1 206 PERFORMANCE CURVE 2 207 PERFORMANCE
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW TABLE 301 MECHANICAL SEAL 302 FITTINGS DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 25/08 204 PERFORMANCE CURVE 25/15 205 PERFORMANCE CURVE 25/25 206
CRT 16-4 A-P-A-E-AUUE 4kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 16-4 A-P-A-E-AUUE 4kW 3x4D 5Hz Grundfos Pump 96117246 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt16/96117246/crt-16-4-a-p-a-e-auue.html
Page - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSION PUMP TABLE 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE R10 205 PERFORMANCE CURVE R13 206 PERFORMANCE CURVE S25 207 PERFORMANCE CURVE S32 208 PERFORMANCE
Supplementary Material: Outlier analyses of the Protein Data Bank archive using a Probability- Density-Ranking approach
RCSB Protein Data Bank Supplementary Material: Outlier analyses of the Protein Data Bank archive using a Probability- Density-Ranking approach Chenghua Shao, Zonghong Liu, Huanwang Yang, Sijian Wang, Stephen
Data sheet: Wilo-CronoTwin-DL 65/250-4/4
Data sheet: Wilo-CronoTwin-DL 65/25-/ Pump curves -pole - individual operation H[m] 2 2 2 Qmin DL 65/25-3/ Wilo-CronoTwin-DL 65/27 - Wilo-CronoTwin-DL 65/25 DL 65/25-/ DL 65/27-5,5/ Approved fluids (other
Data sheet: Wilo-CronoNorm-NL 150/315-37/4
Data sheet: Wilo-CronoNorm-NL 15/315-37/4 Pump curves 4 8 1 16 4Q/US gpm H/m Wilo-CronoNorm-NL 15/315 H/ft 145 1/min 14 5 Hz 4 55% 6% 65% 7% 75% 78% 8% 1 8% 35 Eff. 84,8% 83,9% 3 8% 1 8% 8,1% 78% 8,8%
CRT 8-20 A-P-A-E-AUUE 11kW 3x400D 50Hz
GRUNDFOS DATA BOOKLET CRT 8-2 A-P-A-E-AUUE 11kW 3x4D 5Hz Grundfos Pump 96117234 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crt8/96117234/crt-8-2-a-p-a-e-auue.html
CR10-07 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-7 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651216 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9651216/cr-1-7-a-fj-a-e-hqqe.html
AWTF80SC / 81SC (AF21/AF40-6)
AWTF80SC / 81SC (AF21/AF40-6) FWD 6 Speed 15 35 11 10 40 41 65 50 66 A Pump Assembly 2-6 (B1) Brake Band 3-5 Reverse (C3) Drum 75 Filter 80 20 21 51 52 57 16 17 58 B 24 3-5 Reverse (C3) Clutch 25 81 Front
Honda A A175047C A A B16782 B16775 B17057 B17058 B quantity in package. fastener corresponding. catalogue.
60002 60003 71176 71177 A175047 A175047C A175048 A175049 B14268 B14274 B14313 B14695 B14697 B14698 B15998 B16775 B16782 B17057 B17058 B17143 OEM 60002 10 Accord 93 98, 02 07, 08, Civic 06 11, CR-V 97 01,
MUH. MULTISTAGE HORIZONTAL PUMPS 2 pole - 60 Hz OPERATING LIMITS APPLICATIONS. AdVANTAGES. Flow up to: 16 m 3 /h Head up to:
OPERATING LIMITS Flow up to: 16 m 3 /h Head up to: 9 m Max. operating pressure: 1 bar Max. suction pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: + C DN of ports: G1 to G1 1/
Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
CMA-B-C-D. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE CMA 204 PERFORMANCE CURVE CMB 205 PERFORMANCE CURVE CMC 206 PERFORMANCE
High-speed Centrifugal Pump according to API 610
EGS-L, EGS-W Series High-speed Centrifugal Pump according to API 610 Capacity: 2~90 m 3 /h (50Hz) 2.4~108 m 3 /h (60Hz) Head: up to 1500 m (50Hz) up to 2160 m (60Hz) Pressure: EGS-L: up to 15 MPa, EGS-W: