CLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE SIZES 6-12 CLASS 150/900TH HORIZONTAL WITH HINGE
|
|
|
- Jeffrey Dawson
- 6 years ago
- Views:
Transcription
1 T-Closure catalog 8/11/03 11:51 PM Page 1 CLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE Size A B C D E F Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 6 (150) 5 5 /8 (14.29) 6 5 /8 (16.83) 12 3 /4 (32.39) 4 (10.16) 1 1 /8 (2.86) 9 1 /16 (23.03) 55 (25) 8 (200) 6 15 /16 (17.62) 8 5 /8 (21.90) 15 (38.10) 4 1 /2 (11.43) 1 1 /8 (2.86) 10 3 /8 (26.35) 95 (43) 10 (250) 8 5 /8 (21.91) 10 3 /4 (27.31) 16 1 /4 (41.28) 5 (12.70) 1 1 /4 (3.18) 11 1 /2 (29.21) 150 (68) 12 (300) 9 7 /8 (25.08) 12 3 /4 (32.39) 17 1 /2 (44.45) 5 1 /2 (13.97) 1 5 /16 (3.33) /16 (32.54) 240 (109) SIZES 6-12 CLASS 150/900TH HORIZONTAL WITH HINGE Size A B C D E F G H Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 6 (150) 5 5 /8 (14.29) 6 5 /8 (16.83) 10 1 /8 (25.72) 4 (10.16) 1 3 /8 (3.49) 9 3 /4 (24.77) 5 7 /16 (13.81) 14 3 /8 (36.51) 55 (25) 8 (200) 6 15 /16 (17.62) 8 5 /8 (21.90) 11 (27.94) 4 1 /2 (11.43) 1 7 /16 (3.65) 11 (27.94) 6 7 /16 (16.35) 14 3 /8 (36.51) 95 (43) 10 (250) 8 5 /8 (21.91) 10 3 /4 (27.31) 13 3 /8 (33.97) 5 (12.70) 1 1 /2 (3.81) 13 1 /4 (33.66) 7 13 /16 (19.84) 17 1 /8 (43.50) 155 (70) 12 (300) 9 7 /8 (25.08) 12 3 /4 (32.39) 14 3 /8 (36.51) 5 1 /2 (13.97) 1 5 /8 (4.13) 14 1 /2 (36.83) 8 13 /16 (22.38) 17 1 /8 (43.50) 250 (113)
2 T-Closure catalog 8/11/03 11:51 PM Page 2 THREADED CLOSURES Pipeline Quick-Opening Threaded Hinged Closures
3 T-Closure catalog 8/11/03 11:51 PM Page 3 P.O. Box Louisville, KY Howard Street Louisville, KY Phone: Fax: Website: tubeturns@sypristechnologies.com 12 CL900 threaded closure under 5,000 psi hydrostatic test The information contained herein is based on data and information developed in the Laboratories of Sypris Technologies ( Seller ), but is presented without guarantee or warranty, and the seller disclaims any liability incurred from the use thereof. Nothing contained herein is to be construed as a recommendation for any use, including without limitation, any use in a commercial process not controlled by seller, nor for a use which is in violation of any existing patent, foreign or domestic or of applicable laws and regulations Sypris Technologies, Inc., Tube Turns Division Printed in U.S.A.
4 T-Closure catalog 8/11/03 11:51 PM Page 4 For forty years, Sypris Technologies has provided HINGED CLOSURES for a wide range of applications such as Pipeline Scraper Traps, Pig Launchers/ Receivers, Filters, Meter Provers and Pressure Vessels. The Threaded Type Closure in sizes 2 through 12 in classes 150 through 900 has been added to compliment this wide product line to provide a simple design that consists only of a Head, Welding Hub and Hinging Hardware. Tube Turns Threaded Closures are manufactured utilizing the precision of CNC machining equipment to provide accurate and consistent dimensions. THREADED CLOSURES SAFETY Each Threaded Closure has a Pressure Warning Device to alert the operator of any internal presure in the pipe or vessels before opening the Head. Also, the O-ring Gasket Seal is broken before the Hub/Head ACME Threads are completely disengaged which allows pressure to bleed and provides an additional warning to the operator of existing internal pressure. OPERATIONAL ASSURANCE To assure that the Threaded Closure will consistently open and close easily, Sypris Technologies has coated the Acme Threads on the Head with a Fluoropolymer coating that provides corrosion resistance and solid film lubrication. This is used in combination with liberal grease on the threads to assure reliable closure operation. The Pressure Warning Device is manufactured from Stainless Steel to provide corrosion protection for this safety item. In addition, Grease fittings are installed in all Hinge sliding areas and Bronze Bushings are used at Hub/Hinge pivot points. QUALITY ASSURANCE Sypris Technologies Quality Control System is in accordance with the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section VIII, Division I, Appendix 10 and is audited by an Authorized Inspection Agency. The System covers Order Analysis, Drawing Control, Procurement Control, Receiving of Material, Process Control, Welding, Nondestructive Examination and Inspection. Raw materials are inspected for dimensional acceptability and proper heat code identification. Mill test reports are checked to insure proper physical and chemical properties. A serial number is assigned to each closure and is permanently stamped on the unit. The actual heats of material used for the individual closure are permanently recorded for this serial number and this provides traceability to the material test reports for every closure. O-RING MATERIALS MATERIALS Frequency of replacement will depend upon such factors as operating pressure and temperature, shrinkage and swelling caused by product absorption, the corrosiveness of the product in the system and frequency of operation. The materials most often used for closure O-rings are discussed below. Technical information as to properties and usages of gasket material are based on data and recommendations of the manufacturers of the materials. Determination of the compatibility of the O-ring material is the responsibility of the purchaser. The maximum temperatures are based 100% compression set in 1,000 hours. The O- rings may be used at higher temperatures but with undetermined decreased life. Buna-N General service. Resistant to petroleum base hydraulic and lubricating oils; animal and vegetable oils; gases such as butane, propane, acetylene and natural gas, aromatic and nonaromatic fuels such as gasoline, kerosene, diesel fuel and fuel oils, anhydrous ammonia and water. Temperature limits -30 F to 250 F; special compounds suitable to -65 F. Viton Generally used for high temperature services. Resistant to synthetic lubricants, petroleum base products, some chlorinated solvents, benzene, toluene and many acids and alkalies. Viton is also used for sour gas and oil service. Temperature limits -20 F to 400 F. Ethylene Propylene Superior resistance to phosphate-ester type fluids, Skydrol, Pydrol, Cellulubes and glycol type coolants. Excellent resistance to mild acids and alkalies. Can be used in steam service. Replacing butyl rubber in most applications. Temperature limits -70 F to 300 F. Silicone Rubber Good resistance to high and low temperature dry gases, air, oxygen and ozone. May be satisfactory in high-analine oils, but not recommended for use with most petroleum base products and steam. Temperature limits -65 F to 450 F.
5 T-Closure catalog 8/11/03 11:51 PM Page 5 PRESSURE RATINGS INFORMATION NEEDED WITH INQUIRIES In order to reply promptly to inquiries, the following basic order data requirements are needed: 1. Size 2. Maximum wall thickness of attached pipe and yield strength 3. Maximum design pressure 4. Maximum and minimum design temperature 5. Corrosion allowance 6. Code requirements (stamp, certifications, etc.) 7. Quantity 8. Maximum test pressure 9. O-ring material (Buna-N is normal) 10. Hinge requirements (right hand, left hand, vertical) ALLOWABLE WORKING PRESSURE RATING The maximum allowable working pressures are the same as those established for ANSI/ASME B16.5 Flange Ratings for carbon steel materials. PRESSURE RATINGS Closure Pressure Class Maximum Working Pressure (PSI)* ,480 2,220 *Temperature range for the Working Pressure is -50 F to +450 F. The lower range is based on Impact Test temperature for SA350 Grade LF2 material. The overall temperature range depends on the type of elastomer material used for the O-Ring Gasket. The materials most often used for closure O-Rings are discussed on the previous page. CLOSURE MATERIALS MATERIALS OF CONSTRUCTION Threaded Closure Hubs and Heads are made from forgings dual certified to ASME SA 105/SA 350 Grade LF2 Carbon Steel. Standard Hub material has a minimum specified yield strength of 46,000 psi (F46) to facilitate mating higher pipe yield strengths as provided by Figure I5 of ASME B31.8 and Figure (a)-(2) of ASME B31.4. Higher yield materials such as A694 or A707 are available upon request. The SA 105/SA 350 standard materials can be certified so that they comply with the hardness requirements of NACE MRO175. The self-energized Elastomer O-ring seals are used in Tube Turns Threaded Closures. The standard seal is 70 Durometer Buna-N which has temperature range of -30 to 250 F. For the higher pressure Class 900 closures a 90 Durometer Buna-N seal is standard. Other seal materials, at extra cost, are available as described under O-ring Materials. CODE COMPLIANCE All Tube Turns Threaded Closures are designed and built in accordance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division I. Prototype testing was conducted to prove the design basis and strength requirements for the Closure geometry. ASME Code Stamping and Partial Data Reports are available at the time of order at a nominal extra cost, verifying shop inspection of the unit by a commissioned inspector of the National Board of Boiler and Pressure vessel Inspectors. Alternately we can supply at no extra charge our Manufacturer s Statement of Code Compliance to ASME Section VIII. We can certify D.O.T. Title 49 Part 192 or Part 195, ASME B31.3, ASME B31.4 or ASME B31.8. BORES/WALL THICKNESS Class 150 Thru Class Thru 8 Sizes Maximum wall thickness to match XS pipe (Sch.80) Class 150 Thru Class Thru 12 Sizes Maximum wall thickness to match Sch. 100 pipe Closure Hub I.D. is Taperbored from Schedule 80 to match lighter walls such as standard Weight. Heavier wall thicknesses are available at extra cost.
6 T-Closure catalog 8/11/03 11:51 PM Page 6 CLOSURE DIMENSIONS SIZES 2-4 CLASS 150/900T HORIZONTAL OR VERTICAL Size A B C D E F Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 2 (50) 4 3 /4 (12.07) 2 3 /8 (6.03) 5 1 /16 (12.86) 2 3 /4 (6.99) 2 (5.08) 5 13 /16 (14.76) 9 (4) 3 (80) 5 3 /4 (14.61) 3 1 /2 (8.89) 5 5 /16 (13.49) 2 3 /4 (6.99) 2 (5.08) 6 1 /16 (15.40) 15 (7) 4 (100) 6 3 /4 (17.15) 4 1 /2 (11.43) 5 13 /16 (14.76) 3 1 /8 (7.94) 2 1 /8 (5.40) 6 13 /16 (17.30) 22 (10) SIZES 2-4 CLASS 150/900TH HORIZONTAL WITH HINGE Size A B C D E F G H Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 2 (50) 4 3 /4 (12.07) 2 3 /8 (6.03) 7 3 /8 (18.75) 2 3 /4 (6.99) 13 /16 (2.06) 7 3 /16 (18.26) 2 15 /16 (7.46) 4 3 /16 (10.64) 11 (5) 3 (80) 5 3 /4 (14.61) 3 1 /2 (8.89) 7 5 /8 (19.35) 2 3 /4 (6.99) 13 /16 (2.06) 7 7 /16 (18.89) 3 3 /8 (8.59) 4 3 /16 (10.64) 17 (8) 4 (100) 6 3 /4 (17.15) 4 1 /2 (11.43) 8 1 /8 (20.62) 3 1 /8 (7.94) 15 /16 (2.38) 8 1 /8 (20.64) 3 7 /8 (9.84) 4 11 /16 (11.91) 25 (11)
Tool-less Hinged Closure Installation, Operation, & Maintenance
2612 Howard Street Louisville, KY 40211 USA Phone 502-774-6011 Fax 502-774-6300 Website: www.tubeturns.com For genuine Tube Turns Closure parts please contact factory: ttaftermarket@sypris.com Bulletin
GENERAL INFORMATION. P.O. Box Louisville, KY Howard Street Louisville, KY Phone: Fax:
GENERAL INFORMATION P.O. Box 32160 Louisville, KY 40232-2160 2612 Howard Street Louisville, KY 40211 Phone: 502-774-6011 Fax: 502-774-6300 Website: www.sypristechnologies.com E-mail: tubeturns@sypristechnologies.com
MODCO QUICK OPENING CLOSURES
Figure 500 Threaded Closure Ⅰ Ⅱ Ⅲ MODCO QUICK OPENING CLOSURES If you are looking for a safe, reliable Quick Opening Closure, consider the proven Modco Figure 500. Modco provides an easy accessible, cost-efficient
O-RINGS METRIC SIZES AVAILABLE
METRIC SIZES AVAILABLE 16 97 ILLUSTRATIONS BELOW NOT TO SCALE Military Specification References Temperature Range F Drawing # Specification Static Dynamic Fluid Low High Elastomer Comments AN1295 For use
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
CONNECTION BULLETIN. Vogt Valves. Experience In Motion. Zero Leakage Forged Steel Check Valves Class 800. FCD VVABR /04 (Replaces CB-03)
CONNECTION BULLETIN Vogt Valves Zero Leakage Forged Steel Check Valves Class 800 FCD VVABR1003-00 10/04 (Replaces CB-03) Experience In Motion Zero Leakage, Forged Steel Check Valves: Class 800 Vogt Series
CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
CRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
CRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves
Series 560/570 Safety Valves Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and
VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve
M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves 2 Check & Relief Valves Index
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
TRUNNION MOUNTED BALL VALVES. Ball Valves
TRUNNION MOUNTED BALL VALVES Ball Valves TABLE OF CONTENTS Design and Test Standards 3 Trunnion Ball Valve Features 4 Parts List and Material Specifications (2-Piece) 6 Parts List and Material Specifications
Physical Properties. Temperature Limits. Durometer 60 +/-5. Average Elongation 350% Specific Gravity 1.50 Polymer Content 20% -20 o F to +212 o F
The Advance Standard Model AW Wraparound casing end seal is manufactured of 1/8 thick neoprene rubber, assuring excellent chemical resistance and resiliency. Also included are ½ wide T304 stainless steel
Conley Product Bulletin
EXTRA HEAVY DUTY CONLEY BASKET STRAINERS Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Strainer Types Inline basket strainers in sizes from 1 ½ through 30 Inline Y-type
SERIES CVI AWWA C508 SWING CHECK VALVES 2-48
SERIES CVI AWWA C508 SWING CHECK VALVES -48 508-103 R0 June 018 LIFTING LUGS & ACCESSORY HOLE VSI check valve covers come standard with stainless steel lifting lugs for ease of install and movement in
DUR O LOK couplings are all-purpose, lightweight connectors designed to replace standard ANSI flanges.
DUR O LOK DUR O LOK couplings are all-purpose, lightweight connectors designed to replace standard ANSI flanges. The DUR O LOK coupling meets the requirements of the following codes: ASME Boiler and Pressure
Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future
Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge
Solution Partner. Leak - Proof Flow & Control. Check & Relief Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s eak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Check & Relief Valves Index Check & Relief Valves
Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control
Crosby s Series 800 adjustable blowdown and Series 900 fixed blowdown OMNI-TRIM full nozzle pressure relief valves have a simplified, single trim design with superior application versatility. Features
DUR O LOK. DUR O LOK couplings are all-purpose, lightweight connectors designed to replace ANSI series flanges.
DUR O LOK DUR O LOK couplings are all-purpose, lightweight connectors designed to replace ANSI series 150-2500 flanges. DUR O LOK The Light Weight, Threadless, Boltless Coupling Alternative The performance
Series Pilot Operated Pressure Relief Valves 0810C
Series 00 Pilot Operated Pressure Relief Valves 00C Numbering System To simplify the selection and specifying of Farris pressure relief valves, use the following type numbering system. The type numbering
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.
Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service. Pressure and Temperature Limits Models 912, 913, 918, 919 Steam 3 to 250
Repair Manual MECHANICAL OIL VALVE
MECHANICAL OIL VALVE Repair Manual This Manual for Mechanical Oil Valves purchased before December 2017 INDEX Introduction... 1 Elastomer Materials... 2 Repair Kit Contents... 3 Disassembly... 4 Appendix
Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
Roxar 2 Mechanical Access Fitting System FA-T217-B Product Data Sheet 06.07.2015 Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1) High Pressure
Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517
M M Series PVI/PVIF Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517 Publication 517-105 Issue 11/13 Design Features Implementations The Eccentric Plug valve is the industry standard
MSC Guidelines for Fired Thermal Fluid Heaters Procedure Number: E1-28 Revision Date: April 20, 2018
References C. J. Robuck, LCDR, Chief, Engineering Division a. 46 CFR Part 52 Power Boilers b. 46 CFR Part 54 Pressure Vessels c. 46 CFR Part 63 Automatic Auxiliary Boilers Contact Information If you have
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 800, 900 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 800 adjustable blowdown, Series 900 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
Kunkle Series 900 safety relief valves safety and relief products
Bronze, steel and stainless steel safety relief valves for air, gas, steam, liquid and vacuum service that meet ASME Section VIII, UV ; Section I, V, are National Board certified and PED certified for
Model descriptions. Applications
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Models 910, 911, 916 and 917 ASME Section VIII, Air/Gas/Steam/Liquid, UV National Board certified. Models 920, 921 and 927 ASME Section I Special use
EZ-View. Flow Meters ISO CERTIFIED 9001
EZ-View ISO CERTIFIED 9001 General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable-area instrument. A precisionmolded, sharp-edged Orifice, located within the Piston Assembly,
* Contact your sales representative for compliance to NACE MR or later requirements.
VALVES & CONTROLS crosby SERIES 00, 00 OMNI-TRIM, AND BP OMNI-TRIM Crosby s Series 00 adjustable blowdown, Series 00 fixed blowdown OMNI-TRIM, and BP OMNI-TRIM full nozzle pressure relief valves have a
*Attachment A 1 SCOPE 1.1 This Standard covers cast copper alloy: (a) threaded pipe flanges and blind flanges having rating class designations 150, 300, 600, 900, 1500, and 2500, (b) flanged fittings having
Swivel Joints Flexmaster Joints BD BD BD BD BD BD
FLUID CONVEYING PRODUCTS Section Pages Hose 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Description Page How to Order 230 Selection Criteria 231 Selection Chart 232 Fluid Compatibility Chart
TMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product
Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance
Conley Product Bulletin
EXTRA HEAVY DUTY CONLEY VALVES Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Valve Types Weir style diaphragm valves in sizes from 1 ½ through 6 Swing check valve
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
MSC Guidelines for Fired Thermal Fluid Heaters Procedure Number: E1-28 Revision Date: 06/11/2014
References P. W. Gooding, Chief of Engineering Division a. 46 CFR Part 52 Power Boilers b. 46 CFR Part 54 Pressure Vessels c. 46 CFR Part 63 Automatic Auxiliary Boilers Contact Information If you have
PBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
AUTOMATIC PIG LAUNCHING
AUTOMATIC PIG LAUNCHING Forged Ball Valves 4,000 PSI Production Optimization and Corrosion Mitigation for High Frequency and Remote Pigging Applications SPECIFICATIONS Spec. 6D 0225 Edmonton, AB, Canada
Type B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
Eccentric. P l u g V a l v e. Versatile PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY
Versatile Eccentric P l u g V a l v e Flow Control & Isolation Solved PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY Eccentric Plug Valve - Series 601 Overview Flow control
ÍNDICE FICHAS TÉCNICAS
S BBES ÍNDICE S TÉCNICAS AFLAS-B85 EPDM-B85 EPDM-85-KTW EPDM-W85-FDA FPM-B85 FPM-B85-GD FPM-B85 FPM-B85-FDA HNB-B85 HNB-B85-GD HNB-B85-GD-LT NB-B85 NB-W85-FDA SILICONE-B85-FDA SILICONE-85-FDA 3 4 5 6 7
Strainer BOA-S PN 6/16/25 DN Type Series Booklet
Strainer PN 6/16/25 DN 15-400 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
FA-T17-B Product Data Sheet Pressure ratings up to 6,000 psi/40 bar or 10,000 psi/690 bar 1) High Pressure Access Systems Roxar offers a complete range of access fitting assemblies for installation of
TEXAS UNITED PIPE INC.
TEXAS UNITED PIPE INC. CERTIFICATIONS SPECIFICATIONS & LOADING CHARTS For PVC Pipe Manufactured by Texas United Pipe Inc. P.O. Box 41067 11627 North Houston Rosslyn Houston, Texas 77241 SALES DEPARTMENT
MERCER VALVE GENERAL INFORMATION
THINK...MERCER FIRST MERCER VALVE GENERAL INFORMATION Mercer Valve Company 1980s Mercer valve was founded by Wesley Taylor with his Auto Seat Technology patent for pressure relief valves. Mercer s first
SECTION XI. Subject Interpretation File No.
SECTION XI Subject Interpretation File No. Appendix I, Supplement 9 (1995 Edition With the 1996 Addenda Through the 2005 Addenda).... XI-1-04-34 IN05-017 Appendix VIII, Qualification of Personnel With
9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
PBV. Swing Style Check Valves. Swing Style Check Valves. API 6D Steel Flanged End. Oilpatch Threaded End Swing Check Valves. Swing Check Valves
PBV Swing Style Check Valves Swing Style Check Valves API 6D Steel Flanged End Swing Check Valves P800 Series P900 Series Oilpatch Threaded End Swing Check Valves P00 Series Positive Backflow Prevention
butterfly valves Quality, Service A history of and Innovation
A history of Quality, Service and Innovation Now in its ninth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control products for U.S. and international markets. The company s headquarters
SEALING SYSTEMS. ISO & DIN Gaskets
SEALING ISO & DIN Gaskets ISO & DIN Clamp Gaskets SEALING Sanitary Gasket s ISO #2852 And DIN #32676 Sanitary Gasket s ISO #2852 and DIN #32676 hygienic flanged clamp gaskets are manufactured to FDA and
LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to lpm, 4500 gpm.
HY-PRO FILTRATION LF/LFM - Low Pressure High Flow Assemblies LF flow rate to 560 lpm, 150 gpm / LFM flow rate to 16875 lpm, 4500 gpm Features, Benefits, Advantages Carbon steel construction standard (304
BUTTERFLY VALVES Resilient Seated
General Purpose Butterfly Valves 141 Series & 145 Series Item Description Material 1 Body Ductile Iron ASTM A536 (65-45-12) 2 Seat 3 Shaft 4 Disc AVAILABLE OPTIONS 10 Position Handle Gear Operator Infinite
IBV Series C-LF2 Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Automated Globe Valves. BOA-H Mat P PN 16/25 DN Type Series Booklet
Automated Globe Valves BOA-H Mat P PN 16/25 DN 20-150 Type Series Booklet Legal information/copyright Type Series Booklet BOA-H Mat P All rights reserved. The contents provided herein must neither be distributed,
Full Traceability. Material Specification. Raw Material Code. Heat Treatment
All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
YARWAY NARVIK VEN-TEMP DESUPERHEATER MODEL 25
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp and paper industry and
PN10/16 & PN25 Ballcentric Plug Valve
PN10/16 & PN25 Ballcentric Plug Valve Engineering Creative Solutions for Fluid Systems Since 1901 A Tradition of Excellence With the development of the first rubber seated butterfly valve more than 70
Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.
CROSBY Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure. Features The balanced piston design offsets the effects of variable back pressure on valve set
Flexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
GENERALE TECHNICAL DATA
GENERALE TECHNICAL DATA./02 Compressed air The cylinders have been designed for use with unlubricated air, in which case no maintenance is required. If lubricated air is used, lubrication must be continuous
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48
SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48 509-110 R6 OCT 2018 REPLACEABLE 0-RINGS Triple O-ring sealed with upper two O-rings replaceable with the valve fully open and subjected to the
PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
INSTRUCTION MANUAL. Anchor Darling 1878 Swing Check Valves. Installation Operation Maintenance. Sizes 1/2 through 2 FCD ADENIM
INSTRUCTION MANUAL Anchor Darling 1878 Swing Check Valves Sizes 1/2 through 2 Installation Operation Maintenance FCD ADENIM0006-00 Table of Contents 1.0 Physical Description and Operation of Equipment
YStrainers. Applications. Pressures to 3705 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS RATINGS SIZES
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas YStrainers Pressures to 3705 PSIG Temperatures to 800ºF FEATURES Low pressure
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of
API Program MSA, a.s., is an important manufacturer of industrial valves from the Czech Republic, Europe. The company manufactures and sells wide range of industrial valves for transport and processing
MULTI-PORT PLUG VALVE Engineering Creative Solutions for Fluid Systems Since 1901
MULTI-PORT PLUG VALVE Engineering Creative Solutions for Fluid Systems Since 1901 PRATT MULTI- PORT PLUG VALVE Quality, reliability, safety and value are the criteria embodied in Pratt's Multi-Port plug
Pressure Instrument Testing Equipment
Pressure Instrument Testing Equipment BULLETIN TE-1 A Halliburton Company A Durable, Portable Primary Standard Model 1305D Deadweight Tester The Ashcroft 1305D Deadweight Tester is an affordable, portable
HIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
National Board Update
National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection
1/2" 2" MILLCENTRIC ECCENTRIC PLUG VALVE
1/2" 2" MILLCENTRIC ECCENTRIC PLUG VALVE Overview of Valve Details - 1/2" - 2" The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher
VANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC CONFIGURATION
* BASIC CONFIGURATION With a robust integral-to-body valve seat and optimized seating angles, this valve is capable of handling isolation and process control through multiple functionalities FEATURES GENERAL
Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m
Products of integrity from people of integrity. O -RINGS w w w. n e w m a n g a s k e t. c o m 1 How to size your O -Rings Newman Elastomer Characteristics If you don t know the size or number of the O
See pages 2, 7 and 8 for ATEX ratings. AIR VALVE No-lube, no-stall design 30(51) 35(00) U.S. Gallons per minute
Quality System ISO9001 Certified Environmental Management System ISO14001 Certified U1F Metallic Ball Valve Design Level 1 Air-Operated Double Diaphragm Pump See pages 2, 7 and 8 for ATEX ratings. ENGINEERING,
SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY
SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure
T205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
Insulating joint IK. Insulating joint IK. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Insulating joint IK RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Monoblock insulating joints are boltless, rigid pipeline components, factory-welded
MANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
O-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
Crosby Style JQ Pressure Relief Device. Flow Control
Designed in collaboration with the, Inc. the Crosby JQ is designed with internal parts completely isolated from corrosive fluids and environments. The Crosby Style JQ pressure relief device was designed
EZ-View Flow Meters. General Design Features OPERATING PRINCIPLE
General Design Features 9 8 5 6 7 4 3 2 1 10 OPERATING PRINCIPLE The EZ-View Flow Meter is a variable area instrument. A precisionmolded, sharp-edged Orifice 1, located within the Piston Assembly, 2 forms
Tank and Cylinder Fittings
Tank and Cylinder Fittings THE PHOENIX FORGE GROUP Commanding a Higher Standard PFC511 R1 SM THE PHOENIX FORGE GROUP Commanding a Higher Standard SM CAPITOL MANUFACTURING COMPANY* Crowley, LA CAPPRODUCTS
ASME Section I and VIII - NB Certified for Air/Gas and Steam. Series 560. Series 570. Series Stainless steel whetted trimming.
SAFETY VALVES Safety Valves SIZES FROM 1/2 TO 2 1/2 RATED TO 300 PSI TEMPERATURES TO 450 F ASME Section I and VIII - NB Certified for Air/Gas and Steam Aquatrol s Series / valve line is a high capacity
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Lubricants. UCON 60-H Base Fluids. High Performance Polyalkylene Glycol Fluids
UCON 60-H Base Fluids High Performance Polyalkylene Glycol Fluids Lubricants UCON 60-H Base Fluids The High Performance You Want polyalkylene glycol (PAG)-based products that help formulators meet today
Large Diameter Steel Flanges
ASME B16.47-2011 (Revision of ASME B16.47-2006) Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard AN AMERICAN NATIONAL STANDARD ASME B16.47-2011 (Revision of ASME B16.47-2006) Large
International Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
Basket Strainers. Applications. Pressures to 3705 PSIG. Temperatures to 800ºF FEATURES MATERIALS OF CONSTRUCTION END CONNECTIONS SIZES RATINGS
Applications Process Industry Metals and Mining Power Industry Water & Waste Water Chemical Industry Pulp and Paper Oil and Gas Basket Strainers Pressures to 3705 PSIG FEATURES Temperatures to 800ºF Fabricated
Crosby Style JQ pressure relief device
A combination pressure relief device designed with internal parts completely isolated from corrosive fluids and environments Features Designed in collaboration with the Chlorine Institute, Inc. Provides
These regulations are created pursuant to and of the Colorado Revised Statutes.
DEPARTMENT OF LABOR AND EMPLOYMENT Division of Oil and Public Safety RETAIL NATURAL GAS (CNG/LNG) REGULATIONS 7 CCR 1101-16 [Editor s Notes follow the text of the rules at the end of this CCR Document.]
Fluid Sealing Association
Fluid Sealing Association STANDARD FSA-DSJ-401-09 SPECIFICATION FOR HIGH TEMPERATURE AND ACID RESISTANT TERPOLYMER FLUOROELASTOMER REVISED OCTOBER, 2009 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania
740G Double Disc Check. Valve. Operation / Maintenance Manual. General Information 2. Installation/Operation 3
Operation / Maintenance Manual 740G Double Disc Check table of contents PAGE General Information 2 Installation/Operation 3 Troubleshooting & Disassembly/Reassembly 4 Parts Information 5 Valve! WARNING:
K-LOK High Performance Butterfly Valve Sizes 2 12-inch ANSI Class 150
K-LOK High Performance Butterfly Valve Sizes 2 2-inch ANSI Class 50 Features and Benefits Uninterrupted gasket surfaces eliminate problems associated with seat retaining screws in the gasket surface and
CROSBY J-SERIES DIRECT SPRING PRESSURE RELIEF VALVES
J-Series valves provide high quality and dependable overpressure protection for air, gas, steam, vapor, liquid and two-phase applications in one simple design FEATURES ASME/NB certified capacities for