ASTM THERMOMETERS. Range ** has auxiliary ice point

Size: px
Start display at page:

Download "ASTM THERMOMETERS. Range ** has auxiliary ice point"

Transcription

1

2

3 Only From ASTM THERMOMETERS Also available with ISO17025 Accredited Calibrations Made in strict accordance to the new ASTM Standard E2251 "Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids" Miller & Weber Part # ASTM # Range ** has auxiliary ice point Divisions T-3950/S12C S12C -20 to 102 C 0.2 C T-3950/S12F S12F -5 to 215 F 0.5 F T-3950/S56C S56C 19 to 35 C 0.02 C T-3950/S56F S56F 66 to 95 F 0.05 F T-3950/S59C S59C -18 to 82 C 0.5 C T-3950/S59F** S59F 0 to 180 F 1.0 F T-3950/S62C S62C -38 to +2 C 0.1 C T-3950/S62F S62F -36 to + 35 F 0.2 F T-3950/S63C S63C -8 to 32 C 0.1 C T-3950/S63F S63F 18 to 89 F 0.2 F T-3950/S64C S64C 25 to 55 C ** 0.1 C T-3950/S64F S64F 77 to 131 F ** 0.2 F T-3950/S65C S65C 50 to 80 C ** 0.1 C T-3950/S65F S65F 122 to 176 F ** 0.2 F T-3950/S66C S66C 75 to 105 C ** 0.1 C T-3950/S66F S66F 167 to 221 F ** 0.2 F T-3950/S67C S67C 95 to 155 C ** 0.2 C T-3950/S67F S67F 203 to 311 F ** 0.5 F T-3950/S91C S91C 20 to 50 C 0.1 C T-3950/S116C S116C 18.9 to 25.1 C 0.01 C T-3950/S117C S117C 23.9 to 30.1 C 0.01 C T-3950/S120C S120C 38.5 to 41.5 C ** 0.05 C **This is the commercial ASTM S59F. For the thermometer equivalent to NSN , please contact us directly George Street, Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com

4 THERMOMETERS IN ASTM* RANGES The thermometers listed below are made to substitute for the mercury ASTM thermometers listed in ASTM E 1. Miller & Weber Part # Range ** has auxiliary ice point Divisions T-3950/S5C -38 to 50 C 1.0 C T-3950/S5F -36 to 120 F 2.0 F T-3950/S18C 34 to 42 C 0.1 C T-3950/S18F 94 to 108 F 0.2 F T-3950/S19C 49 to 57 C 0.1 C T-3950/S19F 120 to 134 F 0.2 F T-3950/S22C 95 to 103 C 0.1 C T-3950/S22F 204 to 218 F 0.2 F T-3950/S58C -34 to 49 C 0.5 C T-3950/S58F -30 to 120 F 1.0 C T-3950/S121C 98.6 to C ** 0.05 C T-3950/S122C -45 to -35 C 0.1 C T-3950/S123C -35 to -25 C 0.1 C T-3950/S124C -25 to -15 C 0.1 C T-3950/S125C -15 to -5 C 0.1 C T-3950/S130C -7 to 105 C 0.5 C T-3950/S130F 20 to 220 F 1.0 C NOTE: We are adding listings each week. If you have a requirement for a thermometer not listed here, please call and we will be happy to quote. ALL THERMOMETERS ABOVE ARE AVAILABLE WITH ISO ACCREDITED CALIBRATION George Street, Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com

5 CERTIFIED ASTM THERMOMETERS 1637 George Street, Ridgewood, NY Telephone: (718) Fax: (718) (All PerformaTherm ASTM thermometers are available with Report of Calibration. The items listed below are certified at the ASTM Calibration and Verification Temperatures found in ASTM E 2251) Miller & Weber Part # ASTM # Range ** has aux ice pt Divisions With Report of Calibration at: In Case T-7950/S12CFC S12C -20/102 C 0.2 C -20, -10, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90 & 100 C Y T-7950/S56CFC S56C 19/35 C 0.02 C Every 2 from 19 C Y T-3950/S62CFC S62C -38/+2 C 0.1 C -37, -30, -20, -10 & 0 C N T-7950/S62CFC S62C -38/+2 C 0.1 C -37, -30, -20, -10 & 0 C Y T-3950/S63CFC S63C -8/32 C 0.1 C -7, 0, 10, 20 & 30 C N T-7950/S63CFC S63C -8/32 C 0.1 C -7, 0, 10, 20 & 30 C Y T-3950/S64CFC S64C 25/55 C ** 0.1 C 0, 25, 35, 45 & 55 C N T-7950/S64CFC S64C 25/55 C ** 0.1 C 0, 25, 35, 45 & 55 C Y T-3950/S65CFC S65C 50/80 C ** 0.1 C 0, 50, 60, 70 & 80 C N T-7950/S65CFC S65C 50/80 C ** 0.1 C 0, 50, 60, 70 & 80 C Y T-3950/S66CFC S66C 75/105 C ** 0.1 C 0, 75, 85, 95 & 105 C N T-7950/S66CFC S66C 75/105 C ** 0.1 C 0, 75, 85, 95 & 105 C Y T-3950/S67CFC S67C 95/155 C** 0.2 C 0, 100, 110, 130 & 150 C N T-7950/S67CFC S67C 95/155 C** 0.2 C 0, 100, 110, 130 & 150 C Y T-7950/S6266C NA C Set (S62C thru S66C) 0.1 C All Y T-7950/S91CFC S91C 20/50 C 0.1 C 20, 30, 40 & 50 C Y T-3950/S116C S116C 18.9/25.1 C 0.01 C Every 1 from 19 to 25 C N T-3950/S117C S117C 23.9/30.1 C 0.01 C Every 1 from 24 to 30 C N T-7950/S120CFC S120C 38.6/41.4 C** 0.05 C 0, 40 & 41 C Y T-7950/S12FFC S12F -5/215 F 0.5 F -5, 15, 32, 60, 85, 110, 135, 160, 185 & 210 F Y T-7950/S56FFC S56F 66/95 F 0.05 F Every 4 from 66 F including 95 F Y T-3950/S62FFC S62F -36/+35 F 0.2 F -35, -15, 0, 15 & 32 F N T-7950/S62FFC S62F -36/+35 F 0.2 F -35, -15, 0, 15 & 32 F Y T-3950/S63FFC S63F 18/89 F 0.2 F 20, 32, 50, 70 & 88 F N T-7950/S63FFC S63F 18/89 F 0.2 F 20, 32, 50, 70 & 88 F Y T-3950/S64FFC S64F 77/131 F ** 0.2 F 32, 80, 95, 115 & 130 F N T-7950/S64FFC S64F 77/131 F ** 0.2 F 32, 80, 95, 115 & 130 F Y T-3950/S65FFC S65F 122/176 F ** 0.2 F 32, 125, 145, 160 & 175 F N T-7950/S65FFC S65F 122/176 F ** 0.2 F 32, 125, 145, 160 & 175 F Y T-3950/S66FFC S66F 167/221 F ** 0.2 F 32, 168, 185, 200 & 220 F N T-7950/S66FFC S66F 167/221 F ** 0.2 F 32, 168, 185, 200 & 220 F Y T-3950/S67FFC S67F 203/311 F ** 0.5 F 32, 205, 240, 275 & 310 F N T-7950/S67FFC S67F 203/311 F ** 0.5 F 32, 205, 240, 275 & 310 F Y T-7950/S6266F NA F Set (S62F thru S66F) 0.2 F All Y

6 ISO/IEC Accredited Certificate # AC-1209 Non-Mercury Precision Thermometers Manufactured to ANSI/SAMA Z Mercury Thermometer Specifications Item Number Description ANSI/SAMA Tolerance T-3900S/S110CT 12" -20/110 C, 0.5, Total Immersion ±0.5 C full scale T-3940S/S110CP 12" -20/110 C, 0.5, 76 mm Immersion ±1 C full scale T-3970S/S230FT 12" 0/230 F, 1, Total Immersion ±1 F full scale T-3905S/S230FP 12" 0/230 F, 1, 76 mm Immersion ±2 F full scale T-3900/SCT40 18" -1/51 C, 0.1, Total Immersion ±0.3 C full scale T-3900/SCT45 24" -1/101 C, 0.1, Total Immersion ±0.3 C full scale T-3900/SCT50 24" -1/201 C, 0.2, Total Immersion ±0.4 C up to 100 C, ±0.5 C above 100 C T-3920/SCP40 18" -1/51 C, 0.1, 76 mm Immersion ±1 C full scale T-3920/SCP45 24" -1/101 C, 0.1, 76 mm Immersion ±1 C full scale T-3920/SCP50 24" -1/201 C, 0.2, 76 mm Immersion ±1 C up to 100 C, ±1.5 C above 100 C T-3925/SFT40 18" 30/124 F, 0.2, Total Immersion ±0.5 F full scale T-3925/SFT45 24" 30/214 F, 0.2, Total Immersion ±0.5 F full scale T-3925/SFT50 24" 30/394 F, 0.5, Total Immersion ±1 F up to 212 F, ±2 F above 212 F T-3926/SFP40 18" 30/124 F, 0.2, 76 mm Immersion ±2 F full scale T-3926/SFP45 24" 30/214 F, 0.2, 76 mm Immersion ±2 F full scale T-3926/SFP50 24" 30/394 F, 0.5, 76 mm Immersion ±2 F up to 212 F, ±3 F above 212 F 1637 George Street Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com

7 Non-Mercury Calibrated Thermometers ISO/IEC Accredited Certificate # AC-1209 ISO17025 Accredited, NIST Traceable Report of Calibration supplied with each of these general purpose PerformaTherm thermometers. Total immersion thermometers have tolerances and uncertainties of mercury thermometers. Partial immersion thermometers will repeat with tolerances and uncertainties of mercury thermometers when emergent stem temperature corrections are performed. All partial immersion thermometers supplied with emergent stem temperature data, formulae and coefficients of thermal expansion. Catalog # Length Temperature Range Divisions Immersion Temperatures Calibrated T-7900S/S110CTFC 12 (305mm) -20 to 110 C 0.5 C Total 0, 37, 56 & 100 C T-7940S/S110CPFC 12 (305 mm) -20 to 110 C 0.5 C 76 mm 0, 37, 56 & 100 C T-7970S/S230FTFC 12 (305mm) 0 to 230 F 1 F Total 32, 122 & 212 F T-7905S/S230FPFC T-7900/SCT40FC T-7900/SCT45FC T-7900/SCT50FC T-7920/SCP40FC T-7920/SCP45FC T-7920/SCP50FC T-7925/SFT40FC T-7925/SFT45FC T-7925/SFT50FC T-7926/SFP40FC T-7926/SFP45FC T-7926/SFP50FC 12 (305 mm) 18 (460 mm) 18 (460 mm) 18 (460 mm) 18 (460 mm) 0 to 230 F 1 F 76 mm 32, 122 & 212 F -1 to 51 C 0.1 C Total -1 to 101 C 0.1 C Total -1 to 201 C 0.2 C Total -1 to 51 C 0.1 C 76 mm -1 to 101 C 0.1 C 76 mm -1 to 201 C 0.2 C 76 mm 30 to 124 F 0.2 F Total 30 to 214 F 0.2 F Total 30 to 394 F 0.5 F Total 30 to 124 F 0.2 F 76 mm 30 to 214 F 0.2 F 76 mm 30 to 394 F 0.5 F 76 mm ALL ITEMS SUPPLIED IN PLUSH LINED CASES AS PICTURED ABOVE. 0, 10, 20, 30, 37, 40 & 50 C 0, 10, 20, 30, 37, 40, 50, 60, 70, 80, 90 & 100 C 0, 20, 40, 60, 80, 100, 120, 140, 160, 180 & 200 C 0, 10, 20, 30, 37, 40 & 50 C 0, 10, 20, 30, 37, 40, 50, 60, 70, 80, 90 & 100 C 0, 20, 40, 60, 80, 100, 120, 140, 160, 180 & 200 C 32, 52, 72, 92, 112 & 122 F 32, 52, 72, 92, 112, 132, 152, 172, 192 & 212 F 32, 70, 120, 170, 220, 270, 340 & 390 F 32, 52, 72, 92, 112 & 122 F 32, 52, 72, 92, 112, 132, 152, 172, 192 & 212 F 32, 70, 120, 170, 220, 270, 340 & 390 F 1637 George Street Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com

8 Only from Miller & Weber, Inc. Walls are made of heavy glass Use as a stirring rod! 10mm O.D. Glass Reinforced tips 305 MM Overall Length Blue liquid on white background Calibrated for 76 mm Immersion Tolerance ±1 scale division (same as mercury!) Ask about our mercury thermometer exchange program!! Miller & Weber Part # Description T-3975/JumboA T-3910/JumboA -20 to 110 C, 1 Divisions -4 to 230 F, 2 Divisions 1637 George Street Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com

9 CALORIMETRY THERMOMETERS HAACP THERMOMETERS SAMA PRECISION THERMOMETERS PAINT & COATING THERMOMETERS NOW ALL AVAILABLE WITH PerformaTherm Liquid! No More Hazards! No More Mess! Picture from Miller & Weber, Inc. Booth PITTCON 2002

10 PLEASE READ BEFORE USING YOUR NEW PERFORMATHERM THERMOMETER GENERAL INSTRUCTIONS FOR USE Since PerformaTherm thermometers react very quickly to changes in temperature being measured, it is important that when running the liquid from a higher temperature to a lower temperature (in the down direction) you do not surpass a rate greater than 20 per minute. When going from a lower to a higher temperature there is no restriction on rate of rise. PerformaTherm thermometers react to temperature similarly to mercury thermometers. Once at desired temperature, leave thermometer in medium being tested three minutes before reading. ICE POINT READINGS Place the thermometer in a beaker of room temperature water. GRADUALLY add chopped ice to the water so that the liquid moves no faster than 20 per minute. As the liquid approaches the Ice Point, then place the thermometer directly into a prepared ice bath. Allow the thermometer to remain in the ice bath three minutes before reading temperature. RE-JOINING LIQUID SEPARATIONS All thermometers, including PerformaTherm, experience occasional separations, especially during transit. In order to obtain true and accurate readings; please follow the re-joining instructions below that apply to your thermometer. The particular identification will be found on the back of your PerformaTherm thermometer. S62C & S62F This low-range thermometer is normally joined in one of the two upper chambers. If the separation is in the lower part of the scale, run the liquid down (no faster than 20 per minute) using dry ice and alcohol. When all the liquid is in the bulb, tap the bulb gently so the separations rejoin. Allow the thermometer to stand at room temperature while the liquid rises. DO NOT TOUCH THE BULB WITH YOUR HAND AS THIS MAY CAUSE THE BULB TO BREAK! Allow thermometer to reach room temperature before using. If the separation is below the first chamber above the scale, the liquid must be run up into the chamber and the thermometer tapped gently until the separations are joined. If the separation is slightly above the first chamber, dip the bulb into plain chopped ice until all liquid is in the chamber. Continue to tap the thermometer until the liquid is at the bottom of the bottom chamber. SLOWLY run the liquid in the bore into the chamber (tapping the Page 1 of 2

11 bulb, if needed, to keep the liquid in the chamber at the bottom of the chamber). When both liquids meet, tap the thermometer gently until they join. Allow the thermometer to reach room temperature before using. If the separation is between the chambers, using regular chopped ice, bring the liquid slowly into the lower chamber and join the two liquids following the instructions above. If the separation is in the top chamber, prepare a cup of boiling water and a cup of warm water. Place the TOP of the thermometer, including the top chamber, into boiling water for at least two minutes until the liquid joins together into the bottom of the chamber. Now, place the thermometer s bulb into the warm water so the liquid in the bore rises and joins together with the separation in the top chamber. Gentle tapping may be required to re-join. Maintain the thermometer in warm water and allow to cool naturally until it reaches the lower chamber temperature. S63C & S63F This low range thermometer may be joined in the bulb or the top chamber. If the separation is below the top chamber, slowly draw the liquid down into the bulb using a mixture of dry ice and alcohol. When all the liquid is in the bulb, tap the thermometer gently. This should cause the separation to join. Allow the thermometer to warm up naturally to room temperature before using. DO NOT TOUCH THE BULB WITH YOUR HAND AS THIS COULD CAUSE THE BULB TO BREAK. If the separation is in the top chamber, prepare a cup of boiling water and a cup of warm water. Place the TOP of the thermometer, including the top chamber, into boiling water for at least two minutes until the liquid joins together in the bottom of the chamber. Now place the thermometer into the warm water so the liquid in the bore rises and joins together with the separation in the top chamber. Gentle tapping may be required to re-join. Maintain the thermometer in warm water and allow to cool naturally until it reaches room temperature. S64C & S64F, S65C & S65F, S66C & S66F These three ranges can be joined the same as previously explained. They each have a contraction chamber between the ice point and the first line and a chamber at the top of the thermometer. If the separation is between the bulb and ice point, draw the liquid into the bulb using a mixture of dry ice and alcohol. When the liquid is in the bulb, tap the thermometer gently until the liquid is joined. Allow the thermometer to warm to room temperature naturally. DO NOT TOUCH THE BULB WITH YOUR HAND AS THIS COULD CAUSE THE BULB TO BREAK. If the separation is between the contraction chamber and the top line of the thermometer range, draw the liquid down into the bottom of the contraction chamber using either a mixture of dry ice and alcohol or chopped ice. Warm the bulb so the two liquids join together. Allow the thermometer to cool down to room temperature naturally. If the separation is above the scale or in the top chamber, prepare a cup of boiling water and a warm water bath. Place the TOP of the thermometer, including the top chamber, into boiling water for at least two minutes until the liquid joins together into the bottom of the chamber. Place the thermometer into the warm bath (bulb down) so the liquid in the bore rises and joins together with the separation in the top chamber. Gentle tapping may be required to re-join. Maintain the thermometer in the warm bath and allow to cool naturally until it reaches room temperature. Please contact us if you require further information or technical assistance: 1637 George Street Ridgewood, NY Telephone: (718) Fax: (718) info@millerweber.com Visit our website at: PerformaTherm is a registered Trademark of Miller & Weber, Inc. Page 2 of 2

ISOCAL - 6 Range Europa Venus Calisto

ISOCAL - 6 Range Europa Venus Calisto -45 to 250 C ACROSS RAngE ISOCAL - 6 Range Europa Venus Calisto g 35 x 160mm Calibration Volume g The Most Flexible Temperature Calibrator g S model includes Universal Input Temperature Indicator g Windows

More information

Technical Data SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 1520 SERIES 2000 DIRECT & REVERSE ACTING

Technical Data SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 1520 SERIES 2000 DIRECT & REVERSE ACTING Technical Data SD 520 PRINTED IN U.S.A. SD 520/98 SPENCE ENGINEERING COMPANY, INC. 50 COLDENHAM ROAD, WALDEN, NY 2586-205 SERIES 2000 DIRECT & REVERSE ACTING DIRECT & REVERSE ACTING DIMENSIONS inches (mm)

More information

Heat Engines Lab 12 SAFETY

Heat Engines Lab 12 SAFETY HB 1-05-09 Heat Engines 1 Lab 12 1 i Heat Engines Lab 12 Equipment SWS, 600 ml pyrex beaker with handle for ice water, 350 ml pyrex beaker with handle for boiling water, 11x14x3 in tray, pressure sensor,

More information

SERVICE MANUAL FOR ANALOG CONTROLLER MODELS

SERVICE MANUAL FOR ANALOG CONTROLLER MODELS Analog Controller Page 1 SERVICE MANUAL FOR ANALOG CONTROLLER MODELS Information is reserved for trained, qualified technical personnel. It includes schematics & wiring diagrams. Any repair or service

More information

N I S T traceable calibration equipment conforms to MIL-STD-45662A.

N I S T traceable calibration equipment conforms to MIL-STD-45662A. www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. Turbine RTD's are used for bearing temperature measurement which provides safe and accurate monitoring. The RTD designs offer a resistance value

More information

Shriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka

Shriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital

More information

U tube viscometer. Kinematic viscosity bath RASAYAN

U tube viscometer. Kinematic viscosity bath RASAYAN Viscosity The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. For liquids, it corresponds to the informal notion of "thickness". For example,

More information

PRECISION DC CURRENT SHUNT STANDARDS. The Most Accurate and Widely Recommended DC Shunt Available Today!

PRECISION DC CURRENT SHUNT STANDARDS. The Most Accurate and Widely Recommended DC Shunt Available Today! 9230A SERIES PRECISION DC CURRENT SHUNT STANDARDS The Most Accurate and Widely Recommended DC Shunt Available Today! Guildline Instruments 9230A SERIES of precision DC current shunts / standards are true

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NORTHERN BALANCE AND SCALE, INC. 9556 W. Bloomington Freeway Bloomington, MN 55431 Joey Kaluser Phone: 952 881 7716 CALIBRATION Valid

More information

Direct immersion resistance thermometer

Direct immersion resistance thermometer Direct immersion resistance thermometer PLAIN STEM D100-101-102-103-160-162 CONFIGURATIONS General use RTD Product series PT100WT D100 D101 D102 D103 D160 D162 2 Features assembly The sensor can be immersed

More information

SPECIALTY WEIGHTS CALIBRATION WEIGHTS

SPECIALTY WEIGHTS CALIBRATION WEIGHTS SPECIALTY WEIGHTS Unique weights designed or built for custom applications or tolerances NIST ASTM 228 Applications: Tolerance test or checking Equipment verification in unique units of measurement Slotted

More information

Standard Specification for ASTM Thermometers 1

Standard Specification for ASTM Thermometers 1 Contact International (www.astm.org) for the latest information. Designation: Method 9501 Federal Test Method Standard No. 791b Standard Specification for Thermometers 1 This standard is issued under the

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY CONTROL SERVICES, INC. 2340 SE 11 th Avenue Portland, OR 97214 George Cahill Phone: 503 236 2712 CALIBRATION Valid To: September

More information

ASTM-API Thermometers

ASTM-API Thermometers ASTM Mercury Thermometers ASTM-API Thermometers CATALOG No. ASTM No. The ASTM - Mercury Thermometers listed are made in accordance with specifications of the American Society for Testing and Material.

More information

DigiTemp. Digital Thermometer

DigiTemp. Digital Thermometer DigiTemp R Digital Thermometer (Standard Version) Page 1 The DigiTemp battery-powered digital thermometer is designed to suit a wide range of industrial applications which demand accurate measurement of

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

Tel-Tru Manufacturing Company World-Class Thermometers

Tel-Tru Manufacturing Company World-Class Thermometers Tel-Tru Manufacturing Company World-Class Thermometers We manufacture thermometers - but we sell service, reliability, product quality and performance. QUALITY AND PERFORMANCE FEATURES: CASE AND BEZEL

More information

ISO 3405 INTERNATIONAL STANDARD. Petroleum products Determination of distillation characteristics at atmospheric pressure

ISO 3405 INTERNATIONAL STANDARD. Petroleum products Determination of distillation characteristics at atmospheric pressure INTERNATIONAL STANDARD ISO 3405 Fourth edition 2011-01-15 Petroleum products Determination of distillation characteristics at atmospheric pressure Produits pétroliers Détermination des caractéristiques

More information

Selecting Weights and Certificates

Selecting Weights and Certificates 11 Weight Selection There are several shapes, designs and sizes available to meet your needs. Selecting the proper weight for your application can be confusing given the number of weight classes, designs,

More information

Article: Sulfur Testing VPS Quality Approach By Dr Sunil Kumar Laboratory Manager Fujairah, UAE

Article: Sulfur Testing VPS Quality Approach By Dr Sunil Kumar Laboratory Manager Fujairah, UAE Article: Sulfur Testing VPS Quality Approach By Dr Sunil Kumar Laboratory Manager Fujairah, UAE 26th September 2017 For over a decade, both regional ECA and global sulphur limits within marine fuels have

More information

SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY

SECTION PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY SECTION 230533 - PIPING SPECIALTIES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pressure gages. 2. Pressure gage taps. 3. Thermometers. 4. Thermometer supports. 5. Test plugs. 6. Static pressure

More information

Tel-Tru Manufacturing Company World-Class Thermometers

Tel-Tru Manufacturing Company World-Class Thermometers Tel-Tru Manufacturing Company World-Class Thermometers We manufacture thermometers - but we sell service, reliability, product quality and performance. QUALITY AND PERFORMANCE FEATURES: CASE AND BEZEL

More information

TESTING OF FUELS : FLASH AND FIRE POINT

TESTING OF FUELS : FLASH AND FIRE POINT Department of Mechanical Engineering Indian Institute of Technology New Delhi II Semester -- 2017 2018 MCL 241 Energy systems and Technologies TESTING OF FUELS : FLASH AND FIRE POINT 1. Introduction The

More information

Welcome to Garber C O R P O R AT E O V E R V I E W

Welcome to Garber C O R P O R AT E O V E R V I E W CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope

More information

Instruction Manual for HSPA Take-Up Units

Instruction Manual for HSPA Take-Up Units Installation Instruction Manual for HSPA Take-Up Units Warning: To ensure the drive is not unexpectedly started, turn off and lockout the power source before proceeding. Failure to observe these precautions

More information

Rototherm Certificates of Calibration Traceability and Quality System

Rototherm Certificates of Calibration Traceability and Quality System Rototherm Certificates of Calibration Traceability and Quality System Explanation of how Rototherm, or any company operating ISO 9001:2008, ensures that quality calibration work is performed and the provision

More information

Preparing the New EuroLoop Liquid Flow Facility for Accreditation. Jos van der Grinten - NMi EuroLoop

Preparing the New EuroLoop Liquid Flow Facility for Accreditation. Jos van der Grinten - NMi EuroLoop Preparing the New EuroLoop Liquid Flow Facility for Accreditation Jos van der Grinten - NMi EuroLoop Preparing the new EuroLoop liquid flow facility for accreditation Jos van der Grinten Bart van der Stap

More information

Model Name: 4 Position RPV-1

Model Name: 4 Position RPV-1 Test Methods Model Name: 4 Position RPV-1 FULLY AUTOMATED POLYMER VISCOMETER to determine Relative Viscosity Inherent Viscosity Specific Viscosity Reduced Viscosity Kinematic Viscosity Dynamic Viscosity

More information

UNIVERSAL CALIBRATING MACHINES

UNIVERSAL CALIBRATING MACHINES FIGURE 1-100,000 lbf Morehouse Universal Calibrating Machine using a Morehouse Proving Ring to calibrate a Load Cell in compression. An optional Auxiliary Screw Pump is attached to Machine s upper platen.

More information

High-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading

High-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading 1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,

More information

IFOA Integral Flow Orifice Assembly

IFOA Integral Flow Orifice Assembly Instruction MI 022-333 July 2007 Introduction IFOA Integral Flow Orifice Assembly The IFOA integral flow orifice assembly is used in conjunction with a Foxboro electronic or pneumatic differential pressure

More information

SECTION METERS AND GAGES FOR HVAC PIPING

SECTION METERS AND GAGES FOR HVAC PIPING PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. 1.2 SUMMARY A. This

More information

Standard Specification for ASTM Hydrometers 1

Standard Specification for ASTM Hydrometers 1 Designation: E 100 03 Standard Specification for ASTM s 1 This standard is issued under the fixed designation E 100; the number immediately following the designation indicates the year of original adoption

More information

Beamex MB METROLOGY TEMPERATURE BLOCK. Portable temperature dry block delivering bath-level accuracy for industrial applications

Beamex MB METROLOGY TEMPERATURE BLOCK. Portable temperature dry block delivering bath-level accuracy for industrial applications Beamex MB METROLOGY TEMPERATURE BLOCK 87 Portable temperature dry block delivering bath-level accuracy for industrial applications Highly accurate temperature dry block 88 Portable temperature dry block

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EMPIRE SCALE CORPORATION d.b.a. PRECISION SCALE & BALANCE d.b.a. EMPIRE SCALE & BALANCE 140 Rotech Drive Lancaster, NY 14086 Margery

More information

RTD Insert for Temperature Sensor omniset- TPR100

RTD Insert for Temperature Sensor omniset- TPR100 Technical Information TI00268T/02/en/13.16 71329346 RTD Insert for Temperature Sensor omniset- TPR100 Mineral insulated insert Thermoresistance sensing element PCP (4...20 ma), HART or PROFIBUS-PA electronics

More information

OPERATING USER MANUAL for TEMPERATURE RECORDERS

OPERATING USER MANUAL for TEMPERATURE RECORDERS Serial No. OPERATING USER MANUAL for TEMPERATURE RECORDERS MNW-003 Rev. E 03/21/16 Palmer Instruments Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853 Phone: 828-658-3131 Fax:

More information

PosiTest. Pull-Off Adhesion Tester. INSTRUCTION MANUAL v PosiTest AT-M (manual) PosiTest AT-A (automatic)

PosiTest. Pull-Off Adhesion Tester. INSTRUCTION MANUAL v PosiTest AT-M (manual) PosiTest AT-A (automatic) PosiTest Pull-Off Adhesion Tester INSTRUCTION MANUAL v. 4.0 PosiTest AT-M (manual) PosiTest AT-A (automatic) Introduction The portable, hand-operated PosiTest Pull-Off Adhesion Tester measures the force

More information

Penetration. Test Methods

Penetration.   Test Methods Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum

More information

Traceability overview

Traceability overview Traceability overview Weighing scale and traceable calibration weights from ISO17025 accredited supplier Pipe prover calibration by VSL (NMI Netherlands) Turbine master meter - - - - - - - - - - - - -

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Model 102B15. ICP Pressure Sensor. Installation and Operating Manual

Model 102B15. ICP Pressure Sensor. Installation and Operating Manual Model 102B15 ICP Pressure Sensor Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001

More information

TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS. Replacement for Liquid-in-Glass Thermometers. m

TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS. Replacement for Liquid-in-Glass Thermometers.  m TEL-TRU Manufacturing Co. DIGI-TEL THERMOMETERS Replacement for Liquid-in-Glass Thermometers www.teltru.co m Tel-Tru Manufacturing Company 408 St. Paul St., Rochester, New York 14605 USA Phone: 585.232.1440

More information

AKM 345 Gen2. Instruction Manual. Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35. Document ID: IST EN

AKM 345 Gen2. Instruction Manual. Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35. Document ID: IST EN Instruction Manual AKM 345 Gen2 Oil Temperature Indicator AKM OTI Type 34 Winding Temperature Indicator AKM WTI Type 35 Document ID: IST-103-1-EN www.qualitrolcorp.com (IST-103-1-EN) Legal Information

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,

More information

Fractional Distillation Lab Simulating The Refining of Petroleum 12/12 Integrated Science 3 Redwood High School Name : Per:

Fractional Distillation Lab Simulating The Refining of Petroleum 12/12 Integrated Science 3 Redwood High School Name : Per: Simulating The Refining of Petroleum 12/12 Integrated Science 3 Redwood High School Name : Per: Introduction Petroleum, or crude oil, is a complex mixture of substances. It is believed that crude oil is

More information

PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984.

PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984. PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984. PRECISION GRANITE SURFACE PLATES are made of black

More information

CEAST - HDT & VICAT. Thermal Testing Instruments

CEAST - HDT & VICAT. Thermal Testing Instruments CEAST - HDT & VICAT Thermal Testing Instruments HDT/VICAT TESTING Thermal Testing on Plastics Why? To characterize the material at high temperatures HDT Test Vicat Test 2 HDT/VICAT TESTING Vicat standards

More information

Valveworks USA Operation and Maintenance Booklet Model FC

Valveworks USA Operation and Maintenance Booklet Model FC Operation and Maintenance Booklet Model FC MODEL FC 3000, 5000, 10000, & 15000 W.P. FLOATING SLAB GATE VALVES 1 13/16-2 1/16-2 9/16-3 1/16-4 1/16 BOOKLET APPROVED BY: INTRODUCTION In appreciation to you

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 & ANSI/NCSL Z540-1-1994 EUSTIS CO., INC./PYROCOM CALIBRATION LAB 12407-B Mukilteo Speedway Lynnwood, WA 98087 Bill LeMesurier Phone: 425 423 9996 CALIBRATION

More information

PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984.

PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984. PRECISION GRANITE USA has been providing precision granite metrology products to companies worldwide including many government facilities since 1984. PRECISION GRANITE SURFACE PLATES are made of black

More information

Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis

Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005

More information

STAINLESS STEEL NIST Class F

STAINLESS STEEL NIST Class F 142 STAINLESS STEEL NIST Class F Applications: Field standards for Class III scales or balances Testing non-classified scale equipment Tolerance checking Styles Available: Cylindrical Grip handle Dish

More information

Beton Trowel nv INSTRUCTION MANUEL SLAB SAW BTCS500 - GEBABEBB BBRUBEBB BNP FORTIS: ING: BE BE

Beton Trowel nv INSTRUCTION MANUEL SLAB SAW BTCS500 - GEBABEBB BBRUBEBB BNP FORTIS: ING: BE BE INSTRUCTION MANUEL SLAB SAW BTCS500 BBRUBB 1/20 Use this guide along with the parts lists attached to locate and identify components of your trowel. When ordering replacement parts, be sure to provide

More information

Hellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION

Hellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric

More information

Tachometers and Tach/Hourmeters

Tachometers and Tach/Hourmeters Tachometers and Tach/Hourmeters AT and ATH Series Installation Instructions IMPORTANT! These instructions are specific to tachometer models with a power input operating range of 11-28 VDC and calibration

More information

Schedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.

Schedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C. Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory

More information

Precision Thermometers for Material Testing

Precision Thermometers for Material Testing Precision Thermometers for Material Testing Precision thermometers acc. to ASTM, IP, BS, DIN, ISO, ANSI, AFNOR, S.T.P.T.C. For standardized material testing procedures such as mineral oil testing Catalogue

More information

Model 393B31. Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual

Model 393B31. Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual Model 393B31 Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics,

More information

Instruction Manual. Single-Input Thermistor Thermometer (Model )

Instruction Manual. Single-Input Thermistor Thermometer (Model ) Instruction Manual Single-Input Thermistor Thermometer (Model 91428-05) 68X001349 Rev0 0717 1065DGMAN_91428-05 TABLE OF CONTENTS 1. QUICK-START GUIDE... 1 2. INTRODUCTION... 2 3. SAFETY PRECAUTIONS...

More information

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) 1

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) 1 Designation: D 445 06 An American National Standard British Standard 2000: Part 71:1990 Designation: 71/1/97 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation

More information

ASTM E 1354 Caloric Content Determination of "3M Polyurethane Adhesive Sealant 540"

ASTM E 1354 Caloric Content Determination of 3M Polyurethane Adhesive Sealant 540 ELECTRONIC COPY ASTM E 1354 Caloric Content Determination of "3M Polyurethane Adhesive Sealant 540" A Report To: 3M Center Industrial and Transportation Division 3M Center, Building 223-1N-14 St, Paul,

More information

Free Piston Stirling Engine Kit

Free Piston Stirling Engine Kit Free Piston Stirling Engine Kit IMPORTANT NOTICE! These low temperature differential Stirling engines require only a small difference in the bottom and top plates to operate. DO NOT place them on a high

More information

Single-Input Thermocouple. Thermometers Type J, K, T

Single-Input Thermocouple. Thermometers Type J, K, T Instruction Manual Single-Input Thermocouple Single-Input Thermocouple Thermometers Type J, K, T Thermometers Type J, K, T 68X001351 Rev0 0717 1065DGMAN_91428-00,-01,-02 TABLE OF CONTENTS 1. INTRODUCTION...

More information

Genesys 20 Calibration and Maintenance

Genesys 20 Calibration and Maintenance NOTICE: This document is version controlled and was produced as a part of the GEX Information Program which requires that all Series 100 documents be reviewed periodically to maintain currency and continuity

More information

THE IDLE CIRCUIT AND THE PROGRESSION. We have seen how in a "basic"

THE IDLE CIRCUIT AND THE PROGRESSION. We have seen how in a basic THE IDLE CIRCUIT AND THE PROGRESSION Manufacture and operation of two very important systems, which allow the practical use of a carburetor for motorcycles We have seen how in a "basic" (simplified) carburetor,

More information

EMP1 OPERATING & INSTALLATION INSTRUCTIONS

EMP1 OPERATING & INSTALLATION INSTRUCTIONS 468 Liberty Drive Wittenberg, WI 54499 U.S.A. Tel: 715-253-2801 Ver.11-01-2008 Fax: 715-253-2811 Web: www.solar.imcinstruments.com REV. 4-1-2012 EMP1 OPERATING & INSTALLATION INSTRUCTIONS EMP1-0200 PILOT

More information

UNDERSTANDING CMM SPECIFICATIONS AND CALIBRATION METHODS

UNDERSTANDING CMM SPECIFICATIONS AND CALIBRATION METHODS UNDERSTANDING CMM SPECIFICATIONS AND CALIBRATION METHODS EDUCATION A TECHNICAL PRESENTATION FROM THE LEADING MANUFACTURER OF METROLOGY INSTRUMENTS Bulletin No. 2183 EDU-14003A-H Mitutoyo Institute of Metrology

More information

Tachometers and Tach/Hourmeters

Tachometers and Tach/Hourmeters Tachometers and Tach/Hourmeters AT and ATH Series Installation Instructions IMPORTANT! These instructions are specific to tachometer models with a power input operating range of 11-28 VDC and calibration

More information

A Guide to Dry Block Calibration

A Guide to Dry Block Calibration A Guide to Dry Block Calibration Isothermal Technology manufacture a full range of temperature calibration equipment from Primary Standards used in National and Primary Laboratories, for Secondary Laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. Data Weighing Systems 255 Mittel Drive Wood Dale, IL Steven A. Thomas CALIBRATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. Data Weighing Systems 255 Mittel Drive Wood Dale, IL Steven A. Thomas CALIBRATION SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Data Weighing Systems 255 Mittel Drive Wood Dale, IL 60191 Steven A. Thomas 800-397-6301 CALIBRATION Valid to: September 22, 2019 Certificate Number: L1114-1

More information

Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4

Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4 RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES

More information

* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer)

* T Temperature-Indicating Dial (Must be field set and calibrated to an actual thermometer) 175/153 Series Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2006 Watson McDaniel Company 175 HEATING 153 COOLING 175 / 153 Screwed Connection

More information

OIML Weights & Weight Sets

OIML Weights & Weight Sets OIML Weights & s PRECISE WEIGHTS FOR YOUR MOST PRECISE WORK Troemner, an ISO 9001 registered company, is the world s leading supplier of precision weights, weight sets, mass standards and associated calibration/certification

More information

TK-6024, TK-6124, TK-8024, TK-8124

TK-6024, TK-6124, TK-8024, TK-8124 TK-6024, TK-6124, TK-8024, TK-8124 Pneumatic Bulb Thermostats General Instructions APPLICATION For proportional temperature control of pneumatic valves and actuators to maintain air or liquid temperatures

More information

The Ultimate Critical Service TRIPLE OFFSET VALVE

The Ultimate Critical Service TRIPLE OFFSET VALVE The Ultimate Critical Service TRIPLE OFFSET VALVE INTERNATIONAL, Inc. At Bray, our business is helping our customers with their flow control requirements. Our modular product line of valves, actuators

More information

Model ED 400 Drying and heating chambers Classic.Line with natural convection

Model ED 400 Drying and heating chambers Classic.Line with natural convection Model ED 400 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the

More information

6109A / 7109A. Portable Calibration Baths. Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators

6109A / 7109A. Portable Calibration Baths. Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators 6109A / 7109A Portable Calibration Baths Four times more calibration throughput with twice the accuracy of Micro-Baths and dry-block calibrators Portable calibration baths designed for clean process applications

More information

2 BURETS. Serialized Class A / Class B. Serialized and Certified Class A Burets with Straight Bore PTFE Stopcock

2 BURETS. Serialized Class A / Class B. Serialized and Certified Class A Burets with Straight Bore PTFE Stopcock BURETS Don t be limited by plastic! KIMAX durable glass burets offer unsurpassable physical and chemical properties which means long life and repeatable, accurate results every time. Explore our selection

More information

Eaton. Repair Information. Model and Piston Motors Fixed Displacement, Valve Plate Design. Medium Duty Piston Pump NO.

Eaton. Repair Information. Model and Piston Motors Fixed Displacement, Valve Plate Design. Medium Duty Piston Pump NO. Eaton Medium Duty Piston Pump NO. 7-141 Repair Information Model 74318 and 74348 Piston Motors Fixed Displacement, Valve Plate Design Parts Drawing 8 1 2 3 4 5 6 5 4 7 22 23 Rear or Opposite side Porting

More information

9142-B-P-156/AF. User s Guide. Field Metrology Well. Distribution is limited to DoD and U.S. DoD contractors only.

9142-B-P-156/AF. User s Guide. Field Metrology Well. Distribution is limited to DoD and U.S. DoD contractors only. 9142-B-P-156/AF Field Metrology Well User s Guide Distribution is limited to DoD and U.S. DoD contractors only. May 2013 2013 Fluke Corporation. All rights reserved. Specifications are subject to change

More information

Comparison of IG Testing Standard. IGMA Summer Meeting August 8, 2004

Comparison of IG Testing Standard. IGMA Summer Meeting August 8, 2004 Comparison of IG Testing Standard IGMA Summer Meeting August 8, 2004 1 The Task Compare the new Harmonized standards to: Old ASTM stds. Canadian stds. CEN stds. (Europe) ISO std. (proposed) 2 The Standards

More information

PBV s Engineering Excellence At Work

PBV s Engineering Excellence At Work PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115

More information

Model ED 720 Drying and heating chambers Classic.Line with natural convection

Model ED 720 Drying and heating chambers Classic.Line with natural convection Model ED 720 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the

More information

Temperature Regulators

Temperature Regulators Temperature Regulators DESIGN & OPERATION DIAL THERMOMETER (Model 91400 only) BELLOWS OVERRANGE PROTECTION SPRING CAPILLARY TUBING CONNECTION SENSING BULB RANGE ADJUSTMENT SPRING CAP ADJUSTMENT SCREW BUSHING

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

No January, Char-Lynn. Power Steering. Parts Information. 3, 4, 6, and 12 Series Steering Contol Units

No January, Char-Lynn. Power Steering. Parts Information. 3, 4, 6, and 12 Series Steering Contol Units Char-Lynn Power Steering No. 6-317 January, 1998 Parts Information Steering Contol Units 001 002 Cap Screws 12 Pt. Drive No. 5389-, Spacer Plate 7970, and End Cap, 8438 (21888 Series 4) are -001 Parts.

More information

No July, Eaton. Hydraulic Motor. Repair Information. 30 Series VIS Bearingless Motor 002

No July, Eaton. Hydraulic Motor. Repair Information. 30 Series VIS Bearingless Motor 002 Eaton Hydraulic Motor No. 7-150 July, 1996 Repair Information 30 Series VIS Bearingless Motor 002 30 Series Geroler Motors 2 Disassembly Plug/ Shims Valve Plate Geroler Check Ball Drive Relief Valve Parts

More information

Section 8 AMERICAN. Flanged Pipe

Section 8 AMERICAN. Flanged Pipe Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

Type A10. Falk Freedom Disc Couplings Installation and Maintenance. Type A10 Sizes 85 thru 8770 (Page 1 of 5)

Type A10. Falk Freedom Disc Couplings Installation and Maintenance. Type A10 Sizes 85 thru 8770 (Page 1 of 5) Falk Freedom Disc Couplings Installation and Maintenance Type A0 Sizes 8 thru 8770 (Page of ) How To Use This Manual This manual provides detailed instructions on installation, annual maintenance and parts

More information

Cooling System Description and Operation

Cooling System Description and Operation Page 1 of 5 2008 Holden VE Sedan VE, WM, Caprice, Statesman, Lumina, Omega, VXR8 Service Manual Engine Engine Cooling Description and Operation Document ID: 1990377 Cooling System Description and Operation

More information

Standard Test Method for Dropping Point of Lubricating Grease 1

Standard Test Method for Dropping Point of Lubricating Grease 1 Designation: D 566 02 An American National Standard British Standard 2877 Designation: 132/96 Standard Test Method for Dropping Point of Lubricating Grease 1 This standard is issued under the fixed designation

More information

Heating Methods. Reflux and Distillation

Heating Methods. Reflux and Distillation Heating Methods Reflux and Distillation Heating Methods Reflux Distillation Reflux You will use this next lab for the synthesis of aspirin not in this lab experiment Heating the reaction contents without

More information

Closed Cup Flash Point Tester

Closed Cup Flash Point Tester www.labtron.com info@labtron.com We have distinguished ranges of Closed Cup Flash Point Tester especially designed to offer highest level of accuracy and quality giving a versatility in the capacity and

More information

W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer

W91/W94 Series TEMPERATURE REGULATORS. Self-Operated Temperature Regulators. Design & Operation W91 Non-Indicating W94 Dial Thermometer Design & Operation W91 Non-Indicating W94 Dial Thermometer Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company CAPILLARY

More information

Model ED 400 Drying and heating chambers Classic.Line with natural convection

Model ED 400 Drying and heating chambers Classic.Line with natural convection Model ED 400 Drying and heating chambers Classic.Line with natural convection The strengths of a BINDER ED series drying chamber include routine drying and sterilization tasks up to 300 C. Thanks to the

More information

Model 086C05. Installation and Operating Manual

Model 086C05. Installation and Operating Manual Model 086C05 Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001 Fax: 716-684-0987

More information