PRECISION METERS. Tel: / Int'l: Fax: / Int'l: Springer Pumps, LLC Telford, PA 18969

Transcription

1 PRECISION METERS

2 Sotera Precision Meters incorporate oval gear technology, eliminating metal-to-metal contact within the measuring chamber. This unique design promotes minimal wear, sustained accuracy, and low operating costs. When measuring the flow of a broad range of products, Sotera s innovative meter design results in minimal resistance to flow and the ability to operate on pump pressure or gravity feed. That means efficient performance and low pressure drop across the meter. Sotera s combination of low pressure drop with minimum seal or slippage area offers better accuracy over a wide range of flow than other commercially produced meters. Simplicity in design and high-quality materials and manufacturing practices make Sotera meters more reliable and less costly to operate than other meters. In many cases, you can replace your existing meter with a Sotera meter with minimal disruption to system piping and components. Applications Truck metering Refined fuels LPG Aviation fuel Alternative fuels Lube oils Agricultural chemicals Bulk plant/terminal metering Refined petroleum products and LPG Alternative fuels Industrial chemicals/solvents Marine fuel/bunker oil Hot asphalt/asphalt emulsions Dispenser metering LPG and diesel fuel Diesel Exhaust Fluid Industrial process metering Liquid sweeteners/corn syrup Coatings Pulp and paper Pharmaceuticals Printing inks Concrete add mixtures Industrial liquids Acids/caustics Oval Gear Simple positive displacement technology; only two moving parts.

3 TS06 OVAL GEAR METERS DEF SOLUTION Compact design, only 3.5" x 4" x 5.6" Lighter than 10 pounds Can be easily serviced in place. Can be zero point calibrated in place. Can measure 1,000,000 gallons between zero point adjustments Accurately measures DEF. Individually NTEP approved for DEF custody transfer in the United States. Positive displacement oval gear technology. All wetted materials are approved per ISO Patented Waveform gear technology. Three-piece case construction. Specifications Model Nominal Capacity Pressure Rating Temperature Rating Connections TS06CEDM gpm lpm 50 psi at 100 F Flow Meter (rotors) 3/4" ports NPT 3.5 BAR at 40 C -40 F to +122 F 450-4,500 lph companion flanges 345 kpa at 40 C -40 C to +50 C Materials Case Gears Posts Seals 316SS 316SS with DEF approved engineered polymer bearings. HC316SS Fluorocarbon PULSER Internal Hall effect pulser and SCL signal conditioner with quadrature signal out. METER PERFORMANCE Repeatability and Linearity: NTEP dispenser meter standards APPROVALS Flow Meter: CE mark NTEP A8, 2-10 gpm Pulser: Intrinsically safe (UL, cul & ATEX) Pulse Resolution: 1,024 ppg (270.5 ppl)

4 TS OVAL GEAR METERS Only two moving parts. No metal-to-metal contact in chamber or bearings. Electronic Gland-less meter. Patented "Wave Form" oval gear design. Low differential pressure for maximum flow. Specifications Model TS10 TS15 TS20 TS30 Capacity up to 1,500SSu up to 30:1 turndown 40 gpm 150 lpm 9 m 3 /h 60 gpm 230 lpm 14 m 3 /h 150 gpm 570 lpm 34 m 3 /h 200 gpm 760 lpm 45 m 3 /h Port Connections Linearity Over 5:1 turn-down from max capacity Linearity Over 10:1 turn-down from max capacity Linearity Over 30:1 turn-down from max capacity 1" FNPT ±0.175% 0.25% 0.5% 1.5" 150# RF bolted ±0.175% 0.25% 0.5% 2" 150# RF bolted ±0.175% 0.25% 0.5% 3" 150# RF ±0.175% 0.25% 0.5% Pressure Rating at 100 F (38 C), 400PSI/28BAR except TS30 275PSI/19BAR Temperature Rating: Design -40 F/+300 F = -40 C to +125 C Repeatability: 0.05% Pulser: TBB, ScL - 5, 12, or 24V Materials Case Gears Posts Seals 316 Stainless steel or hardcoat anodized aluminum PPS (polyphenylene sulfide resin) with carbon bearings 316SS hard chrome coated Teflon standard Nominal Pulse Resolution ( 3% nominal) Standard Models 1 cp Viscosity Stainless Steel 1 cp Viscosity Aluminum TS10 ±2,176 ppg (574.8 ppl) ±1,728 ppg (456.5 ppl) TS15 ±2,800 ppg (740 ppl) ±2,660 ppg (703 ppl) TS20 ±805 ppg (212 ppl) ±777 ppg (205 ppl) TS30 ±405 ppg (107 ppl) ±390 ppg (103 ppl)

5 Average* K Factor** on 1 cp viscosity. When operating at*** Models Capacity 25% 50% 60% 70% 80% 90% 100% 110% TS10 Material SS AL SS AL SS AL SS AL SS AL SS AL SS AL SS AL (Hz) Pulse (ms ON) , , ,306 1,037 1,451 1,152 1,596 1, Models Capacity 25% 50% 60% 70% 80% 90% 100% 110% TS15 Material SS AL SS AL SS AL SS AL SS AL SS AL SS AL SS AL (Hz) Pulse (ms ON) , ,152 1,013 1,267 11, Models Capacity 25% 50% 60% 70% 80% 90% 100% 110% TS20 Material SS AL SS AL SS AL SS AL SS AL SS AL SS AL SS AL (Hz) Pulse (ms ON) Models Capacity 25% 50% 60% 70% 80% 90% 100% 110% TS30 Material SS AL SS AL SS AL SS AL SS AL SS AL SS AL SS AL (Hz) Pulse (ms ON) ,031 1,146 1, *Individual meters vary slightly. ** At 0.5 cp (LPG), K Factor is abt 2% higher. Over 100 cp viscosity, K Factor is abt 1.5% lower. *** Operation over 100% on low viscosity lubricating liquids only. Please consult for intermittent flow over 110%. Approvals Custody Transfer approvals are liquid specific. W&M approval in the United States, Canada* & EU*. Flow Meter CE mark. Truck Dispensing TS Meter

6 TM MINI OVAL GEAR METERS Only two moving parts. No metal-to-metal contact in chamber or bearings. Electronic Gland-less meter. Low differential pressure for maximum flow. Specifications Model TM02 TM03 TM04 TM06 Capacity on 1cSt at 10:1 turndown 0.3 gpm 1.1 lpm 18 gph 68 lph 30 gpm 11 lpm 180 gph 680 lph 10 gpm 38 lpm 600 gph 2,250 lph 20 gpm 76 lpm 1,200 gph 4,500 lph Port Connections Linearity Over 10:1 turn-down from nominal capacity Repeatability Linearity Over 30:1 turn down from max capacity ¼" FNPT ±2% 0.5% 0.5% 3/8" FNPT ±1% 0.5% 0.5% ½" FNPT ±0.5% 0.25% 0.5% ¾"FNPT ±0.5% 0.25% 0.5% Pressure rating at 100 F (38 C), with 3:1 safety factor: 1,500 psi = 103 BAR Temperature rating: Design -40 F/+300 F = -40 C to +150 C Materials Case Gears Posts Seals 316 Stainless steel or hardcoat anodized aluminum Registration, Signals & Accessories ELECTRONIC REGISTERS Tuthill electronic flow meters will support most common electronic registers and controllers. Available through Tuthill: Consult factory. PPS (polyphenylene sulfide resin) 316SS Hard chrome coated Teflon standard

7 Nominal Pulse Resolution ( 5% nominal) Standard Models 1 cst Viscosity 100 cst Viscosity TM02 ±7,700 ppg (2034 ppl) ±7,300 ppg (1930 ppl) TM03 ±2,800 ppg (740 ppl) ±2,660 ppg (703 ppl) TM04 ±805 ppg (212 ppl) ±777 ppg (205 ppl) TM06 ±405 ppg (107 ppl) ±390 ppg (103 ppl) Average* K Factor** on 1 cp viscosity. When operating at*** Model Capacity 2.5% 5% 10% 20% 40% 60% 80% 100% TM02 (Hz****) Theoretical Pulse (ms ON) Model Capacity 2.5% 5% 10% 20% 40% 60% 80% 100% TM03 (Hz****) Theoretical Pulse (ms ON) Model Capacity 2.5% 5% 10% 20% 40% 60% 80% 100% TM04 (Hz****) Theoretical Pulse (ms ON) Model Capacity 2.5% 5% 10% 20% 40% 60% 80% 100% TM06 (Hz****) Theoretical Pulse (ms ON) * Individual flow meters can vary by +/-1% ** At 0.5 cp (LPG), K Factor is 2-3% higher. Over 100 cp viscosity, K Factor is 3-5% lower. *** Please consult for intermittent flow over 100%. **** Minimum frequency required to generate a reliable analog (4-20 ma) signal: 4.5 Hz via PC58. APPROVALS Flow Meter CE mark. Pulsers UL, cul & ATEX listed. Intrinsically safe when powered through a UL or ATEX listed barrier with appropriate rating. Batching TM meters

8 Tuthill Transfer Systems SSG_0511-REV 0