Ebbles Miniatures. DIMENSIONS: 3.94 TALL x WIDE x LONG (100mm x 320mm x 352mm)
|
|
- Hector Townsend
- 6 years ago
- Views:
Transcription
1 Ebbles Miniatures MODEL INFORMATION 36 PAGES, 134 PARTS TOTAL DIMENSIONS: 3.94 TALL x WIDE x LONG (100mm x 320mm x 352mm) DIFFICULTY LEVEL: INTERMEDIATE (SOME CARD MODELING EXPERIENCE RECOMMENDED) RECOMMENDED CARD WEIGHT: gsm (110lb CARD OR 80lb COVER) COMPATIBLE WITH 28mm SIZED MINIATURES
2 COLOR SCHEMES AND NOSE ART VARIATIONS HELO DRAB (HOLLYWOOD VERSION) SUBDUED GRAY (REALISTIC VERSION) DROPSHIP 01 "EXPEDITED DELIVERY" Tail number , nose code 01, assigned to USSV Tarawa. Helo Drab and Subdued Gray schemes included. DROPSHIP 02 "PEST CONTROL" Tail number , nose code 02, assigned to USSV Tarawa. Helo Drab and Subdued Gray schemes included. DROPSHIP 03 "PAIN TRAIN" Tail number , nose code 03, assigned to USSV Tarawa. Helo Drab and Subdued Gray schemes included. DROPSHIP 04 "HELLO NURSE!" Tail number , nose code 04, assigned to USSV Tarawa. This dropship is marked as a medevac ship. Helo Drab and Subdued Gray schemes included.
3 ACROBAT PDF LAYERS This model uses Acrobat PDF Layers for the decal sets. The first page of the PDF is the Model Configurator. You will be presented with five options: a blank model with no decals, and 4 different decal sets. Clicking on any of these 5 swatches will automatically configure the PDF with all of the appropriate decal options in a single click. NOTE: When you print the model, take care not to print the first page start from Page 2 onwards. HAND CUT AND MACHINE CUT PDFS This model includes two different PDF versions. The hand-cut version includes fold lines and cut lines, and is formatted for cutting out with a hobby knife and ruler. In other words, this is the normal PDF you're used to. The machine-cut version has no visible fold or cut lines, and each part is surrounded by a thin textured border. This padding compensates for any slight inaccuracies in cutting and also greatly reduces the amount of glue tab coloring needed. This model also includes all of the necessary GSD files for cutting with Craft ROBO and Silhouette SD craft cutters.
4 NOSE PREPARATION, STEP NOSE PREPARATION, STEP 2 SLIT A "X" HERE AND FOLD IN THE TABS
5 FRONT FUSELAGE PREPARATION, STEP FRONT FUSELAGE PREPARATION, STEP 2 SLIT A "X" HERE AND FOLD IN THE TABS
6 ENGINE PYLON PREPARATION, STEP ENGINE PYLON PREPARATION, STEP 2 SLIT A "X" HERE AND FOLD IN THE TABS
7 ENGINE PYLON PREPARATION, STEP ENGINE PYLON PREPARATION, STEP 4 FOLD UP AND GLUE BOTH PYLONS INTO SHAPE
8 FUSELAGE PREPARATION, STEP 1 GLUE PARTS 27, 24, 26, AND 28 TOGETHER TO FORM REAR FUSELAGE STRIP GLUE PARTS 15, 13, 16, AND 17 TOGETHER TO FORM MIDDLE FUSELAGE STRIP 17 FUSELAGE PREPARATION, STEP
9 FUSELAGE PREPARATION, STEP 3 SLIT A "X" HERE SLIT A "X" HERE SLIT A "X" HERE AFTER SLITTING, JOIN BOTH FUSELAGE STRIPS WITH TAPE ON THE UNPRINTED SIDE CARGO BAY PREPARATION, STEP JOIN CARGO BAY SEGMENTS WITH TAPE ON THE UNPRINTED SIDE
10 FRONT FUSELAGE, STEP 1 02 FRONT FUSELAGE, STEP 2
11 FRONT FUSELAGE, STEP 3 12 FUSELAGE REINFORCERS, STEP
12 FUSELAGE REINFORCERS, STEP FUSELAGE REINFORCER REFERENCE, FRONT VIEW SIDE REINFORCERS NEED TO BE BETWEEN LANDING GEAR HOLES, TOP AND BOTTOM REINFORCERS SHOULD BE FLUSH WITH SIDE REINFORCERS
13 FUSELAGE REINFORCER REFERENCE, REAR VIEW SIDE REINFORCERS NEED TO BE BETWEEN LANDING GEAR HOLES, TOP AND BOTTOM REINFORCERS SHOULD BE FLUSH WITH SIDE REINFORCERS UPPER FUSELAGE DETAILS, STEP
14 CARGO BAY, STEP 1 23 TAPE TOGETHER PARTS 22 AND 33 TO FORM CARGO BAY FLOOR CARGO BAY, STEP 2
15 CARGO BAY, STEP 3 SLIDE CARGO BAY INTO OUTER FUSELAGE. NO GLUE IS NEEDED. CARGO BAY REFERENCE CARGO BAY SHOULD BE NEARLY FLUISH WITH THE FRONT OF THE MIDDLE FUSELAGE
16 RAMP FRAME, STEP RAMP FRAME, STEP 2
17 FINAL FUSELAGE ASSEMBLY, STEP 1 FINAL FUSELAGE ASSEMBLY, STEP 2
18 FINAL FUSELAGE ASSEMBLY, STEP ENGINE POD ASSEMBLY, STEP
19 ENGINE POD INSTALLATION THE ENGINE PODS ARE DESIGNED TO BE REMOVABLE. DO NOT GLUE THEM TO THE FUSELAGE. OPTION PLATES, STEP
20 OPTION PLATES, STEP 2 THE OPTION PLATES ARE DESIGNED TO BE REMOVABLE. DO NOT GLUE THEM TO THE FUSELAGE. OPEN LANDING GEAR PODS, STEP 1 LANDING GEAR PEGS: FRAME PEGS PEGS
21 OPEN LANDING GEAR PODS, STEP 2 STRUTS STRUTS BLOCKS BLOCKS PADS PADS ALL PARTS ON THIS STEP ARE ON FRAME 32 OPEN LANDING GEAR PODS, STEP 3
22 OPTIONAL CLOSED LANDING GEAR PODS THE GEAR PEGS SLOT THROUGH PARTS 80, 83, 84, AND 87 IN THE SAME WAY AS THE OPEN GEAR PODS LANDING GEAR INSTALLATION THE LANDING GEAR PODS, BOTH OPEN AND CLOSED, ARE DESIGNED TO BE REMOVABLE. DO NOT GLUE INTO PLACE.
23 REAR RAMP, STEP REAR RAMP, STEP 2
24 NOSE GUN TURRET AND FLIR POD, STEP " CHAD 95 GLUE 3 LAYERS OF SCRAP CARDSTOCK TOGETHER, THEN PUNCH OUT A ROUND CHAD WITH A ¼" HOLE PUNCH NOSE GUN TURRET AND FLIR POD, STEP 2 EXTRA NOSE PLATE (PARTS 91/98)
25 ROCKET PODS EXTRA FRONT FUSELAGE PLATE (PARTS 97/101 ) EXTRA FRONT FUSELAGE PLATE (PARTS 96/100 ) MISSILE PODS SLOT PEGS (PARTS 105 AND 106) THROUGH HOLES ON PARTS 88 AND 89 BEFORE GLUING MISSILE PODS CLOSED 88 MISSILE PODS REPLACE PYLON OPTION PLATES 89
26 COMPLETED MODEL, FULL OPTIONS COMPLETED MODEL
FLYING MODEL ROCKET KIT INSTRUCTIONS KEEP FOR FUTURE REFERENCE. TEST-FIT ALL PARTS TOGETHER BEFORE APPLYING ANY GLUE!
www.estesrockets.com ESTES INDUSTRIES 1295 H Street Penrose, CO 81240 PRINTED IN CHINA EST 1247/2053 FLYING MODEL ROCKET KIT INSTRUCTIONS KEEP FOR FUTURE REFERENCE. ASSEMBLY TIP: Read all instructions
More informationSUPPLIES In addition to the parts included in the kit you will also need: ASSEMBLY TIP FLYING MODEL ROCKET KIT INSTRUCTIONS EST 2055/1246
FLYING MODEL ROCKET KIT INSTRUCTIONS www.estesrockets.com Estes Industries 1295 H Street Penrose, CO 81240 PRINTED IN CHINA MOUNT Keep for Future Reference EST 2055/1246 ASSEMBLY TIP Read all instructions
More informationBob's Card Models and [Resources]
Bob's Card Models www.bobscardmodels.altervista.org and www.zealot.com [Resources] 1 Fairchild C-119G 'Flying Boxcar" (1:72) Decals: US Air Force The Fairchild C-119 Flying Boxcar (Navy designation R4Q)
More informationBob's Card Model and [Resources]
Bob's Card Model www.bobscardmodels.altervista.org and www.zealot.com [Resources] Conair C S 2F (Tracker) water-bomber(1:144) Securité Civile's converted Tracker, used for patrol duty, but also for water-bombing
More informationRe-Energy.ca - Solar Electricity - Build Your Own Solar Car
Backgrounder Build Your Own Solar Car Back to Page 1 Build It! These step-by-step instructions provide you with a plan for making a basic solar car. If you can think of ways to improve the design of your
More informationChopper Couplings. Assembly. Fitting
Chopper Couplings Unlike most model chopper couplings, these will work with two opposing hooks, which looks so much better and allows you to turn stock at will. They are still compatible with most other
More informationRight On Replicas, LLC Step-by-Step Review * F-86D Sabre Dog 1:48 Scale Revell Model Kit # Review
Right On Replicas, LLC Step-by-Step Review 20150410* F-86D Sabre Dog 1:48 Scale Revell Model Kit #85-5868 Review Further development of the F-86 led to the radar-guided, rocket armed F-86D or Dog Sabre.
More informationSpace Pod. Cut Out. Cut Out. Page 1. 1:32 scale model Original model design by: Ron Caudillo. from. Cut Out USA. Cut Out.
1:32 scale model 1 7 USTOM MOELS orbin, Kentucky 2 Glue parts 2, 4, 5, and 7 onto part 1 the inside. 3 4 5 6 Mountain fold along this curve. Page 1 8 9 R 10 11 Y 12 13 17 18 14 15 16 Glue assembly consisting
More information1:6 BLACK BRANT II. c o s m o d r o m e r o c k e t r y
c o s m o d r o m e r o c k e t r y 1:6 BLACK BRANT II This kit is capable of use with high thrust motors. It is therefore strongly recommended that epoxy be used throughout the construction of this kit.
More informationCleveland Quickie Piper Cub
Cleveland Quickie Piper Cub This plan package is not a 100% copy of the original kit. As you make your way through the instructions you will see the differences. Here s just a few of them: The one thing
More informationArmor How-To KITBASHING DRAGON S T-34/85M
Armor How-To KITBASHING DRAGON S T-34/85M 58 FineScale Modeler December 2002 1/35 Scale Story and photos by Peter Rasmussen A scratchbuilt turret turns a T-34 into a modern-era tank killer Combining ICM
More informationConnection kits for joining all types of DEVI self-limiting heating cables to cold tails
Intelligent Heating Connection kits for joining all types of DEVI self-limiting heating cables to cold tails Fitting set (art. no. 19805761) Cold tail fitting set: 1 crimp tube type 12/3, L =20 mm 2 crimp
More informationRADIO CONTROL MODEL HURRICANE
RADIO CONTROL MODEL VQAA040G VQAA040B HURRINE Almost ready to fly SPECIFITIONS Wingspan...63 in. / 161cm Length...50 in. / 129cm Engine...50~60 2T / 70~90 4T Or Electric equivalent. RC Functions: Motor
More informationBob's Card Models and [Resources]
Bob's Card Models www.bobscardmodels.altervista.org and www.zealot.com [Resources] Douglas DC-3 "Dakota" (Scale 1:50) The Douglas DC-3 is an American fixed-wing, propeller-driven aircraft whose speed and
More informationRadio control model INSTRUCTION MANUAL PYLON RACING. Wingspan: 1148mm (45.2 ) Radio : 4 channels Engine : two-stroke
VQA038 VQA039 Radio control model INSTRUCTION MANUAL MAGIC PYLON RACING Wingspan: 1148mm (45.2 ) Radio : 4 channels Engine :.25 -.32 two-stroke WARNING! This radio control model is not a toy. If modified
More informationBachmann Digital Sound Decoder Installation Notes
New Dimensions in Digital Sound Technology TM APPLICATION NOTE Bachmann 2-6-6-2 Digital Sound Decoder Installation Notes Overview This application note describes the installation of a DSD-090LC Digital
More informationInstruction Manual book
book (pusher propeller) ITEM CODE:BH 142 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,165 mm 45.87 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 size (29 x 13 x 30) mm. Electric
More informationBuild your own THUNDERBIRD 2
PACK 06 PAGE 33 Telescopic legs C and I.R.3 112 34 Telescopic legs D and I.R.3 115 35 Leg bases and Thunderizer 118 36 Landing feet and Elevator Car 3 121 37 Leg rail-gear racks and Elevator Car 3 124
More informationRevell F-117 Stealth Fighter. 1/48 th Scale Kit # 5834
Revell F-117 Stealth Fighter. 1/48 th Scale Kit # 5834 By Mark Murray I won t go into the history of this aircraft, as it s offered by many other sources, far better than I can expound upon. Suffice it
More informationSkill Level 3 Average Skills Needed. Made In USA. Kit #04997 Skill Level 4. Zephyr Parts List
Kit #04997 Skill Level 4 Made In USA Zephyr Parts List Item # Item Name Qty 10137 Engine Mount Tube (AT-38/11) 1 10218 Airframe Body Tube (AT-98/18) 4" Thick Wall 1 10219 Airframe Body Tube (AT-98/18)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REAR SPOILER Application 2011 CR-Z MUGEN Publications No. AII 45919 Issue Date APRIL 2011 PARTS LIST Right wing bracket Rear wing Left wing bracket Right wing base Right
More informationBuild your own THUNDERBIRD 2
PACK 01 STAGE PAGE 01 Nose assembly and Elevator Car rear wheels 3 02 Cockpit interior and Elevator Car 1 completion 7 03 Missile launcher and Thunderbird 4 11 04 Nose assembly and the Tracy brothers 15
More informationARF. Specifications: ASSEMBLY MANUAL MS: 193. Graphics and specifications may change without notice.
ASSEMBLY MANUAL Graphics and specifications may change without notice. MS: 193 ARF Specifications: Wingspan---------------62.0 in (157.5 cm). Wing area----------------620 sq.in (40.0 sq.dm). Weight-------------------3.3-3.9
More informationASSEMBLY INSTRUCTION FOR RC MODEL PRINTED ON 3D PRINTER
ASSEMBLY INSTRUCTION FOR RC MODEL PRINTED ON D PRINTER Visit our website www.print-beat.com and purchase a product which you are interested in. Then you get an access for the file download in g-code or
More informationSkill Level 3 Average Skills Needed. Skill Level 3. Ibis Parts List
Kit #05152 Skill Level 3 Made In USA Ibis Parts List Item # Item Name Qty 10076 AT- 18/3.5" LC - Engine Mount Tube 1 10123 AT- 33/6.5" LC - Body Tube 1 10124 AT- 33/18" LC - Body Tube 1 13029 CR- 13/18
More informationDassault Aviation FALCON 7 X. for Jet CAT P160. Assembly Manual. AVIATION Design
Dassault Aviation FALCON 7 X for Jet CAT P160 Assembly Manual AVIATION Design ZI le chenet, 91490 Milly La Foret, FRANCE Tel : 33 1 64 98 93 93 Fax : 33 1 64 98 93 88 E-mail : aviation.design@wanadoo.fr
More informationMR-1. Please read and understand all instructions before building!
MR-1 This kit contains all the parts necessary* to build a flying high power rocket: (1) Pre-slotted main airframe (1) Nose cone with strap (3) Fins (1) Transition (1) Airframe section 1 long (1) Piston
More informationRAYTHEON PREMIER I. TOWING Information This section of this sub-chapter provides information on towing procedures for the Model 390 airplane.
RAYTHEON PREMIER I TOWING Information This section of this sub-chapter provides information on towing procedures for the Model 390 airplane. Towing involves ground movement of the airplane without engine
More informationInstruction Manual. Wingspan : 1400 mm (55.12 inch) : 1480 mm (58.27 inch) : 5500gr gr. : 6-9 channel/ 8 servo high torque,1 standard
Wingspan : 1400 mm (55.12 inch) g Length : 1480 mm (58.27 inch) Weight : 5500gr - 6000gr Radio : 6-9 channel/ 8 servo high torque,1 standard Engine : GT 22 OS KIT CONTENTS: We have organized the parts
More informationCurtiss Canuck. R/C Scale Model Instructions. CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker
Curtiss Canuck 41 1/2 Curtiss Canuck R/C Scale Model Instructions CONTACT INFORMATION The Curtiss Canuck was designed by M.K. Bengtson Prototype By Dave Walker Manufactured and Distributed by: Bengtson
More informationALMOST READY TO FLY. Wing Span in cm. 2
ASSEMBLY MANUAL ALMOST READY TO FLY MS: X12 A - B Graphics and specfications may change without notice. Kit features. Specifications Wing Span ------------------------------- 42.7 in ---------------------
More informationAthearn Pacific Digital Sound Decoder Installation Notes
New Dimensions in Digital Sound Technology TM APPLICATION NOTE Overview This application note describes how to install a DSD-100LC Digital Sound Decoder into the Athearn Pacific Locomotive. All of the
More informationGent EPP. Before use please read the explanations carefully
Before use please read the explanations carefully Gent EPP Instruction Manual Specifications Fuselage length 900mm 35in Wingspan 820mm 32in Flying Weight 210 240g with battery Additional Required Equipment
More informationThe Go Baby Go Build Manual
The Go Baby Go Build Manual The step-by-step guide to creating your own Go Baby Go Car 4488 Shockwave Robotics and Pacific University Index 1. List of Mat erials 2. Mechanical Assembly a. Installing the
More informationInstruction Manual book
Instruction Manual book SPECIFICATION Wingspan : 1,800mm. 70.87 in. Length : 1,350 mm. 53.15in. Weight : 3.6kg. 7.92lbs. Parts Listing required (not included). Glow Engine : 55-61 2 stroke. 91 4 stroke.
More informationMARACANA ASSEMBLY INSTRUCTION .40 ARF LOW WING TRAINER RADIO CONTROL MODEL. Every body can fly
RADIO CONTROL MODEL ASSEMBLY INSTRUCTION MARACANA.40 ARF LOW WING TRAINER Every body can fly VQA085 EP GP You can use both Gas or Electric power Wingspan: 59in.(1520mm) Fuselage length: 48in.(1220mm) Engine:
More informationInstallation Instructions Supertop for Truck
Installation Instructions Supertop for Truck US Patent 6827391 Vehicle Application: Ford F150 1987-1996 (8 ft.) Part Number: 76315 Ford F250 1987-1998 (8 ft.) Part Number: 76315 Ford F350 1987-1998 (8
More informationAcademy s F-86F vs Tamiya s MiG-15
Academy s F-86F vs Tamiya s MiG-15 By Dick Smith The North American Aviation F-86 Sabres and the Mikoyan-Gurevich MiG-15 s that dueled in the skies over North Korea in the early 1950s were considered almost
More informationFigure 1. A CheapBot Robot
A CheapBot controller needs a robot body to function. An ideal robot body for the beginner consists of two sheets of Syntra plastic, separated by four bolts. The bottom deck contains the robot controller
More informationASSEMBLY MANUAL. Kit features. MS:76
ASSEMBLY MANUAL MS:76 Graphics and specfications may change without notice. Specifications: Wingspan---------------------------------------------------- 82.8 in------------------------------------- 210.3cm.
More informationINSTRUCTION MANUAL BOOK
INSTRUCTION MANUAL BOOK ITEM CODE BH57. SPECIFICATION Wingspan: 1,470 mm. 57.87 in. Length : 1,180 mm. 46.46 in. Weight : 2.7 Kg. 5.94 Lbs. Engine : 46 cu.in 2 stroke. 52 cu.in 4 stroke. Radio : 4 channels.
More informationSU-31 PROFILE ELECTRIC ARF ASSEMBLY MANUAL
SU-31 PROFILE ELECTRIC ARF ASSEMBLY MANUAL 1 TABLE OF CONTENTS Page Aeroworks Contact Information... 3 Introduction.. 4 Kit Contents... 5 Items needed to complete 6 Wing Assembly. 7 Stab Assembly. 10 Flight
More informationRoadComfort TM. Installation Manual Vibration Massage & Heat
RoadComfort TM Vibration Massage & Heat Installation Manual 1-562-447-1780 WWW.RELAXOR.COM Table of Contents I Required tools II System Configuration III Motor Placement Bottom IV Motor Placement Back
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 1404mm (55.3in) - Length: 1134mm (44. 6 in) - Flying weight: 3.2-3.4 kg - Covering type: Genuine ORACOVER - Spinner size: scale type (not included) - Radio: 4 channel minimum
More informationMain parts and accessories
Schemes : Main parts and accessories Contents : Removing the covering - 1 Horn installation - 3 Rudder installation - 4 Tail Wheel system - 12 Landing gear installation - 6 Stabilizer installation - 5
More informationCopyright 2009, John Jogerst. Not for commercial use. For personal or educational use only
Space Falcon 9 (Heavy modification) 1:100 scale Where it is not obvious, red arrows mark the places to cut. Payload Fairing: Cut out the three parts for the upper fairing. Roll the smallest part into a
More informationRight On Replicas, LLC Step-by-Step Review * M-50 Ontos 1:32 Scale Renwal/Revell Model Kit # Review
Right On Replicas, LLC Step-by-Step Review 20150429* M-50 Ontos 1:32 Scale Renwal/Revell Model Kit #85-7823 Review Here s a fun fact: Ontos is the Greek word for thing. The M50 Ontos is a U.S. Light Armored
More informationARF TRAINER KIT ASSEMBLY MANUAL BOOMERANG EP. ALMOST READY TO FLY
WWW.SEAGULLMODELS.COM ASSEMBLY MANUAL BOOMERANG EP ARF TRAINER KIT Graphics and specifications may change without notice. MS: 211 ALMOST READY TO FLY Specifications: Wingspan---------------56.0 in (142.2
More informationInstruction Manual book
Instruction Manual book ITEM CODE:BH118. SPECIFICATION Wingspan : 1,050 mm 41.34 inches. Length : 950mm 37.4 inches. Weight : 1 kg 2.2 lbs. Radio : 04 channels. Servo : 4 mini servos. Motor : BL2215/20
More informationF3P Instruction Manual
Before use, please read the explanations carefully! F3P Instruction Manual Specifications Fuselage length: 884mm ( 34. Bin ) Wingspan : 845mm ( 33. 2in) Flying Weight : 135-160g (with battery) Additional
More informationSpaceX Falcon 9 1:100 scale Flight Vehicle 01
Flight Vehicle 01 Where it is not obvious, red arrows mark the places to cut. Dragon Capsule: Cut out the three parts for the capsule. Roll the smallest part into a shallow cone, overlapping to the dotted
More informationStrap-on Booster Pods
Strap-on Booster Pods Strap-On Booster Parts List Kit #17052 P/N Description Qty 10105 AT-24/12 Slotted (Laser Cut) Tube 2 10068 Engine Mount (AT-18/2.75) Tube 2 13029 CR 13/18 2 13031 CR 18/24 4 14352
More information29% KATANA ARF ASSEMBLY MANUAL
29% KATANA ARF ASSEMBLY MANUAL Required but not included Aircraft Specifications: 4 channel radio and supporting equipment Wing Span 84 Engine 3.2-4.2 c.i. (50-60 c.c.) Wing Area 1270 Sq. in. Fuel Tank
More informationInstruction Manual book
Instruction Manual book Item code:bh144 SPECIFICATION Wingspan : 1,400 mm 55.12 in. Length : 1,350 mm 53.15 in. Weight : 4 kg 8.8 Lbs. Empty Weight: 1.9 kg 4.18 lbs Radio : 08 channels. Servo : 08 size
More informationMS:169 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
? ASSEMBLY MANUAL MS:169 Graphics and specifications may change without notice. Specifications: Wing span ------------------------------66.9in (170cm). Wing area -----------------764.2sq.in (49.3sq dm).
More informationThe aft interstage needs stringers. I used a ruler and a pencil (read: I m not fixing this)
The aft interstage needs stringers. I used a ruler and a pencil (read: I m not fixing this) Below is a 6 ruler when it prints correctly, the this sheet is properly scaled for a 1/96 model Above is a 6
More informationMEMO. No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2. Warranty
MEMO No.4341 Specification: Wing Span: 29.1 (740mm) Length: 36.6 (930mm) 2 Wing Area: 299 sq.in. (19.29 dm ) Weight: 18.9oz. (536.5g) 2 Wing loading: 0.58 oz./sq.ft (27.8g/dm ) Motor: OBL 29/27-07A Warranty
More informationEXTRA 330LX. Specifications: Code: SEA274. Graphics and specifications may change without notice. ASSEMBLY MANUAL
ASSEMBLY MANUAL EXTRA 330LX Code: SEA274 Graphics and specifications may change without notice. Specifications: Wingspan---------------82.0 in (208.2 cm). Wing area---------------1349.4 sq.in ( 87.1 sq.dm).
More informationTHUNDERBOLT P47G SNAFU 60 ARF ASSEMBLY MANUAL. ALMOST READY TO FLY
WWW.SEAGULLMODELS.COM ASSEMBLY MANUAL THUNDERBOLT P47G SNAFU 60 ARF Graphics and specifications may change without notice. MS: 207 ALMOST READY TO FLY Specifications: Wingspan---------------63.0 in (160
More informationFlyzone P-40 FF to R/C Conversion Instructions
Flyzone P-40 FF to R/C Conversion Instructions Hobbico Flyzone EP FF airplanes have been around for years, with exciting new models being added constantly. The recent interest shown by R/C modelers in
More informationInstruction Manual book
Instruction Manual book Item code:bh117 SPECIFICATION Wingspan : 2,100 mm 82.68 in. Length : 1,875 mm 73.82 in. Weight : 7.5 kg 16.5 Lbs. Radio : 08 channels. Servo : 09 servos. Engine : 33-45cc gas. Made
More informationTip: 2856 LED Lighting for the Airport Express Set Date:
Hi All, The 2856 Airport Express set was manufactured in 1983. On 09-11-1989 the locomotive was given a digital upgrade using a 6080 decoder. It has since had a digital upgrade to a high performance motor
More informationASSEMBLY MANUAL. Kit features. MS:88
MS:88 ASSEMBLY MANUAL Graphics and specfications may change without notice. Specifications: Wingspan-------------------------------------------------- 70.9 in--------------------------------------- 180cm.
More informationInstruction Manual book
book SPECIFICATION Wingspan : 1,450 mm 57.09 in. Length : 1,200mm 47.24in. Weight : 3.1 kg 6.82 Lbs. Radio : 05 channels. Servo : 07 servos. Engine : 61-75 2 stroke. 91 4 stroke. Made in Vietnam. This
More informationI n s t r u c t i o n M a n u a l. Instruction Manual SPECIFICATION
I n s t r u c t i o n M a n u a l Instruction Manual SPECIFICATION - Wingspan: 3200mm (125,9 in) - Length: 1650mm (64,9 in) - Flying weight: 3000gr 3200gr - Wing area: 64.5 dm2 - Wing loading: 46g/dm2
More informationInstruction Manual book
book SPECIFICATION Wingspan : 1,920 mm 75.59 in. Length : 1,560 mm 61.42 in. Weight : 5 kg 11.00Lbs. Radio : 06 channels. Servo : 09 servos. Engine : 120 4 stroke. Made in Vietnam. This instruction manual
More informationMagnetic MTV Kit. User Guide. Components
Magnetic MTV Kit User Guide Components The Magnetic MTV Kit should contain the following items. If anything is missing, call Customer Service at 800-358-4983. Two 3" x 18" sheets of 1/4" balsa wood Mousetrap
More informationStrix Goblin Instruction Manual. Rev
Strix Goblin Instruction Manual Rev 3-4.24.2017 1 Introduction Thank you for purchasing the Strix Goblin! This is a high performance plank style aircraft and it was designed using aerodynamic principles
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 6000mm (236.2 in) - Length: 2873mm (113.1 in) - Flying weight: 14-18 kg - Wing area: 219.4 dm2 - Wing loading: 64g/dm2 - Wing type: HQ airfoils - Covering type: Genuine ORACOVER
More information2. Use Extraction Tool (contact extraction tool). Insert releasing tip into the REAR of the. cavity between the spring and center wall of the
Twin Leaf PC Board Edge Connectors are designed for wire to pc board applications. To meet specific circuit requirements, housings are supplied (1) to be assembled using contacts, retaining springs, and
More information8mm EPP Acrocub. Instruction Manual. Specifications
8mm EPP Acrocub Instruction Manual Specifications Wingspan: 34.6 in (880mm) Length: 31.5 in (800mm) Wing Area: 213.9 sq in (13.8sq dm) Flying Weight: Approx. 9oz (270g) Dear Customer, www.valuehobby.com/8mm-epp-acrocub.html
More informationP-38J Lightning. Minicraft Models (US) LLC th St. Ste. 104 Rockford, IL
P-38J Lightning The P-38 was developed just before WWII for the United States Army Air Force that combined high-speed performance, heavy firepower and long range. The P-38 was used extensively in Europe
More informationEPP Sheet, 3 mm, 20g/dm³. EPP Sheet, 10 mm, 20g/dm³. 900 mm x 580 mm. 900 mm x 580 mm. EPP Sheet, 6 mm, 20g/dm³. EPP Sheet, 6 mm, 30g/dm³
EPP Sheet, 6 mm, 20g/dm³ 900 mm x 580 mm EPP Sheet, 6 mm, 30g/dm³ 900 mm x 580 mm Spacer Main Wing Spacer Main Wing EPP 10 mm Spacer Main Wing EPP Sheet, 3 mm, 20g/dm³ 900 mm x 580 mm EPP Sheet, 10 mm,
More informationRECOMMENDED MOTOR AND BATTERY SET UP
SPECIFICATION - Wingspan: 2190mm (86.2 in) - Length: 1907mm (75 in) - Flying weight: 9000-12000 gr - Wing area: 92 dm2 - Wing loading: 98g/dm2 - Wing type: Naca airfoils - Retract gear type: Air-retract
More informationt!z ESFE~ PARTS AND SUPPLIES ROCKET ASSEMBLY 1. FLYING MODEL ROCKET #2054 .~. 1111l~i '~~
t!z ESFE~ ESTES INDUSTRIES 1295 H Street Penrose, CO 81240 USA ASSEMBLY TIP BETA LAUNCH FLYING MODEL ROCKET #2054 VEHICLETM Read all instructions before beginning work on your model. Make sure you have
More informationInstruction Manual book
Instruction Manual book ITEM CODE: BH56. SPECIFICATION Wingspan : 1,660 mm 65.35 in. Length : 1,420 mm 55.91 in. Weight : 3.8 kg 8.36 Lbs. Radio : 06 channels. Servo : 08 servos. Engine : 75 Cu.in 2 Stroke.
More informationInstruction Manual Book
Book ITEM CODE: BH99. SPECIFICATION Wingspan : 2,850 mm 112.20 in. Length : 1,910 mm 75.20 in. Weight : 8.1 kg 17.82 lbs. Parts listing required (not included): Radio : 06 channels. Servo : 08 standard
More informationInstruction Manual book
book ITEM CODE: BH109 SPECIFICATION Wingspan : 2,200mm. 86.61 in. Length : 1,976 mm. 77.80in. Weight : 8.3 kg. 18.26 lbs. Part listing required (not included) Glow Engine : 55 CC Gas Servo : 9 servos.
More informationHARMON ROCKET III. Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL
HARMON ROCKET III Hand-made Almost Ready to Fly R/C Model Aircraft ASSEMBLY MANUAL Specifications Wingspan---------------------------------------- 50.4 in---------------------------- 128cm. Wing area---------------------------------------
More informationInstruction Manual book
book ITEM CODE:BH 139 SPECIFICATION Wingspan : 1,450mm 57.09 in. Length : 1,140 mm 44.88 in. Weight : 3.3kg 7.26 Lbs. Radio : 05 channels. Servo : 07 mini servos+ 3servos Retracts (FUTABA S3170G) EDF:
More information: 7 channel - 9 servo, Hi-Torque ( Minimum 6 kg ).
g Wingspan : 1820mm (71.65 inches) Length : 1625mm (63.98 inches) Weight : 6900gr Engine : 25cc - 35cc Radio : 7 channel - 9 servo, Hi-Torque ( Minimum 6 kg ). KIT CONTENTS: We have organized the parts
More informationDVS Cypress Face Installation Instructions (SKU )
Table of Contents Compatibility... 1 Packing List... 1 Installation... 2 Prepare the Insert for Face Installation... 2 Attach the Surround Panels (if applicable)... 6 Assemble the Face... 7 Attach the
More informationPAPER CRAFT. Assembly Instructions
PAPER CRAFT Assembly Instructions Thank you for downloading the "SR400"paper craft model. By simply following this manual while referring to the names and numbers shown on the parts sheets, you can assemble
More informationMS:176 ASSEMBLY MANUAL. Graphics and specifications may change without notice.
ASSEMBLY MANUAL MS:176 Graphics and specifications may change without notice. Specifications: Wing span ------------------------------98.4in (250cm). Wing area ----------------1576.4sq.in (101.7sq dm).
More informationI do hope you build and enjoy a model from this plan package. Paul Bradley
There are several notes I need to provide to aid you with the enclosed package. The original kits used 1/16" balsa. Since I wanted to print these directly on balsa sheet I developed the parts for 1/32"
More informationFront Bumper Refresh Kit (FBR) - Contents WORLD S FIRST TESLA TUNER
Front Bumper Refresh Kit (FBR) - Contents Front Bumper Refresh Chrome V Strip Hardware Kit Hardware Kit Includes: Black Chrome V Strip Clamps (x5) Parking Sensor Brackets (x4) Adhesive (x1) Parking Sensor
More informationMiG-29 Retract Kit (for the HET-RC Mini Air Retract System)
MiG-29 Retract Kit (for the HET-RC Mini Air Retract System) The MiG-29 Retract Kit was designed to allow the easy installation of the HET-RC mini Air Retract system into the twin EDF MiG-29. We recommend
More informationAVIATOR 25 ARF Almost Ready-to-Fly
AVIATOR 25 ARF Almost Ready-to-Fly Instruction Manual Specifications Wingspan: 54.3 in (1380mm) Length: 45.2 in (1150mm) Wing Area: 438 sq in (34sq dm) Flying Weight: 3.8 b (1700g) Dear Customer, Congratulations
More informationSTORCH. Parts. Additional items needed to complete the Storch
STORCH Parts Fuse with Greenhouse- (Attached) Left and right wing panel Horizontal and vertical stab 2 Wing center blocks 2 Carbon spares for wing 1 Undercarriage with wheels 2 Undercarriage shocks 2 Carbon
More informationTurbinator-2 Build Manual
Turbinator-2 Build Manual Thank you for your purchase of the Turbinator-2 sport jet by Boomerang RC Jets. This RC Jet IS NOT A TOY and should only be flown and operated by experienced RC Turbine Pilots.
More informationLanier R/C F-4 Phantom
Lanier R/C.40-.46 F-4 Phantom Almost Ready to Fly WARNING! THIS IS NOT A TOY! THIS IS NOT A BEGINNERS AIRPLANE This R/C kit and the model you will build from it is not a toy! It is capable of serious bodily
More informationMonocoupe 90 AF BY LESLIE M. ADAMS
Monocoupe 90 AF BY LESLIE M. ADAMS Tired of contest models? Get away from it all with this swell flying scale version of the latest Monocoupe. Its appearance will satisfy even most exacting scale fiend.
More informationFT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version: 1.1 Date:
www.flitetest.com FT Legacy Designed By: Josh Bixler Drawing By: Dan Sponholz Version:. Date: 08..0 GENERAL SPECIFICATIONS: LENGTH: CG: WINGSPAN: WING AREA: DRY WEIGHT: ALL UP WEIGHT: WING LOADING: WCL:
More informationASSEMBLY MANUAL
www.seagullmodels.com MS: X104 ASSEMBLY MANUAL Graphics and specifications may change without notice. Specifications: Wing span ----------------- 35.4in (90.0cm). Wing area ------------------392.2sq.in
More information2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E
BILLET GRILLS IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete 5122-1900-11E TOOLS REQUIRED Automotive
More informationWWW.SEAGULLMODELS.COM ASSEMBLY MANUAL Graphics and specifications may change without notice. Code: SEA231 Specifications: Wingspan---------------80 in (203.2 cm). Wing area---------------1235.4 sq.in (79.7
More informationFalcon mkiii. Christian Perry Pleasant Grove, Utah November 2009
Falcon mkiii Christian Perry Pleasant Grove, Utah November 2009 This is my third build of the Falcon 120 from Nitro Planes. I have really enjoyed this jet and wanted to do the best I could with this build
More informationSuper Chipmunk 20-30CC Manual. Instruction Manual
ARF MODEL Super Chipmunk 20-30CC Manual Instruction Manual Dear Customer, Thank you for purchasing this excellent almost-ready to fly R/C model. This plane is to be powered by 20-30CC gas engine. It can
More informationAssembly Instruction
Assembly Instruction Driving cap floor assembly kit for TAMIYA Scania R470/R620 (1:14,5) - cab bed + seat holder Best.-Nr.: 2014-9001-01 Version 1.3en 13.12.2015 MDTechShop - Wörthstrasse 40-70563 Stuttgart
More information1660mm (65.4 in) 1200mm (47.2 in) 2700gr gr 6 channel - 7 servo standard 46/ 2 stroke or 52/ 4 stroke
Instruction Manual CESSNA-46 1660mm (65.4 in) 1200mm (47.2 in) 2700gr - 3000gr 6 channel - 7 servo standard 46/ 2 stroke or 52/ 4 stroke KIT CONTENTS: We have organized the parts as they come out of the
More information