0049 (0) / FAX: 0049 (0) / MOBILE: 0049 (0) 175 / LIGHTNING REELS

Size: px

Start display at page:

Download "0049 (0) / FAX: 0049 (0) / MOBILE: 0049 (0) 175 / LIGHTNING REELS"

Melvin Casey
6 years ago
Views:

SALES OFFICE EUROPE Mart Fischer Marienstrasse 11 D-96465 Neustadt bei Coburg PHONE: 0049 (0) 95 68 /

1 SALES OFFICE EUROPE Mart Fischer Marienstrasse 11 D Neustadt bei Coburg PHONE: 0049 (0) / FAX: 0049 (0) / MOBILE: 0049 (0) 175 / SALES@LIGHTNING-REELS.COM

Dear Ladies and Gentlemen, it is a great honor for us to present the new productgroup Lightng Reels to you. We deliver reels which are sgle produced high quality for professional use.

2 Dear Ladies and Gentlemen, it is a great honor for us to present the new productgroup Lightng Reels to you. We deliver reels which are sgle produced high quality for professional use. As a new partner of leadg wire manufacturers we do offer high flexibility, top quality and reliability durg the handlg of your orders and requests. Our supplier is equipped with high tech machery. The employees all high of motivated and qualified people - are producg goods high quality. This all is done Cha under supervisg of german Engeers at European quality standards but on Asian pricg bases. Our new setup solution enables us to offer you a wide range of reels. Certaly that attached Product list is meetg your requirements and with many thanks advance. We are lookg forward to a future of mutual benefit. With best regards, LIGHTNING REELS TM SALES OFFICE EUROPE MARTIN FISCHER TELEFON: 0049-(0) TELEFAX: 0049-(0) Handy: (0) SALES@LIGHTNING-REELS.COM

3 PRODUCT RANGE: DOUBLEWALL REELS TYPE DWS /-S PAGE 4 DIN AND DIN REINFORCED REELS TYPE HDS PAGE 5 DIN AND DIN MASSIVE MACHINE REELS TYPE MS PAGE 6 DIN AND DIN SINGLEWALL REELS TYPE EWS/OWS PAGE 7 DIN AND DIN FABRICATION REELS TYPE FRS PAGE 8 DIN 46391, DIN AND DIN CORRUGATED REELS TYPE CFS PAGE 9 DIN 46391, DIN AND DIN CONICAL REELS TYPE CR PAGE 10 SPECIAL REELS AND OTHER PAGE 11 REPAIRING OF REELS PAGE 12 STANDART MEASUREMENTS PAGE QUESTIONAIRE (FOR TECHNICALITY USE) PAGE 16

DOUBLEWALL REEL TYP DWS / -S DIN 46395 AND DIN 46397 REEL WITH DOUBLE WALL FLANGES FOR DRAWING, BUNCHING, STRANDING, REWINDING, ANNEALING, EXTRUSION LINES, ETC.

THIS REEL CAN BE DYNAMICALLY BALANCED FOR A MAX. SPEED UP TO 40 m/s ACCORDING TO ISO R 1940 QUALITY CLASS Q16. INDICATED FOR HIGH SPEED WIRE DRAWING AND ANNEALING PROCESS AND FOR AUTOMATIC LOADERS.

4 DOUBLEWALL REEL TYP DWS / -S DIN AND DIN REEL WITH DOUBLE WALL FLANGES FOR DRAWING, BUNCHING, STRANDING, REWINDING, ANNEALING, EXTRUSION LINES, ETC. THE EXTERNAL FLANGE RIM IS SUITED FOR LIFTING TILTERS OR X-HOOKS. WE DELIVER THIS REEL ACCORDING TO DIN AND OR AS INDICATED BY CUSTOMER. AVAILABLE FROM FLANGE DIAMETER 315 UP TO THIS REEL CAN BE DYNAMICALLY BALANCED FOR A MAX. SPEED UP TO 40 m/s ACCORDING TO ISO R 1940 QUALITY CLASS Q16. INDICATED FOR HIGH SPEED WIRE DRAWING AND ANNEALING PROCESS AND FOR AUTOMATIC LOADERS. AVAILABLE FOR CUSTOMERS ON REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE - EXTRA STRONG REINFORCED CONSTRUCTION - TURNING OF INSIDE FLANGES AND/OR DRUM - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) OR GALVANICED AND STENCILLED OR STAMPED - BALANCED WITH PROTOCOL - DRIVING HOLES OR DRIVING PINS - EXTRA DUTY DRUM WITH DRUM RINGS - DRUM IN PERFORATED METAL PLATE - SUITABLE FOR AUTOMATIC LOADERS - WITH FLANGE CABLES ACCESS SLOTS - DIFFERENT CHOICE OF BUSHINGS - CAN BE DELIVERED WITHOUT OUTSIDE FLANGE (ONLY INSIDE FLANGE IS TYPE DWS) - WITHOUT RIM

5 REINFORCED DRAWING REEL TYPE HDS DIN AND DIN HEAVY REINFORCED DRAWING REEL FOR DRAWING OF ALUMINIUM AND COPPER WIRES OR HIGH CONSTAND WIRES. THIS REEL IS DESIGNED FOR A CONTINUOUS USE IN TIME WITH DOUBLE FLANGES. WE DELIVER THIS REEL ACCORDING TO DIN AND OR AS INDICATED BY CUSTOMER. AVAILABLE FROM FLANGE DIAMETER 400 UP TO THIS REEL CAN BE BALANCED FOR A MAX. SPEED OF 40 m/s. AVAILABLE FOR CUSTOMERS ON REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE - EXTRA STRONG REINFORCED CONSTRUCTION - TURNING OF INSIDE FLANGES OR DRUM - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) OR GALVANICED AND STENCILLED OR STAMPED - BALANCED WITH PROTOCOL - DRIVING HOLES OR DRIVING PINS - LIFTING HOLES AND PEDESTAL - EXTRA DUTY DRUM WITH DRUM RINGS - DRUM IN PERFORATED METAL PLATE OR DRILLED - SUITABLE FOR AUTOMATIC LOADERS - WITH FLANGE CABLE ACCESS SLOT - DIFFERENT CHOICE OF BUSHINGS - SPECIAL STEEL PALLETS FOR THIS REEL AVAILABLE - CAN BE DELIVERED IN SPECIAL STEEL OR ALUMINIUM

6 MASSIVE REEL TYPE MS DIN AND DIN SOLID REEL WITH SOLID FLANGES FOR DRAWING, BUNCHING, STRANDING, REWINDING, EXTRUSION. THIS REEL CAN COMPLETE TURN ALL OVER. WE DELIVER THIS REEL ACCORDING TO DIN AND DIN OR AS INDICATED BY CUSTOMER. AVAILABLE FROM FLANGE DIAMETER 100 UP TO AVAILABLE ON CUSTOMERS REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE - EXTRA STRONG REINFORCED CONSTRUCTION - SURFACE NOT TURNED - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) AND STENCILLED OR STAMPED OR GALVANICED - BALANCED UP TO 40m/s (WITH PROTOCOL) - DRIVING HOLES /-PINS OR LIFTING HOLES /-PINS - EXTRA DUTY DRUM WITH DRUM RINGS - DRUM IN PERFORATED METAL PLATE OR DRILLED - SUITABLE FOR AUTOMATIC LOADERS - WITH FLANGE CABLE ACCESS SLOTS - DIFFERENT CHOICE OF BUSHINGS - CAN BE MADE IN SPECIAL STEEL OR ALUMINIUM - STEEL PALETTS FOR THIS TYPE AVAILABLE - CAST IRON DESIGN

SINGLE WALL REELS TYPE EWS / OWS DIN 46395 AND DIN 46397 PRESSED SINGLE WALL AND LOW PRICE REEL WITH RIM. FOR WIRE PROCESS OR INDICATED FOR SINGLE OR MULTI TRIP SHIPPING AND REWINDING.

7 SINGLE WALL REELS TYPE EWS / OWS DIN AND DIN PRESSED SINGLE WALL AND LOW PRICE REEL WITH RIM. FOR WIRE PROCESS OR INDICATED FOR SINGLE OR MULTI TRIP SHIPPING AND REWINDING. WE CAN DELIVER THIS REEL ACCORDING TO DIN / DIN OR AS INDICATED BY CUSTOMER. REEL AVAILABLE FROM FLANGE DIAMETER 100 TO 1250 AVAILABLE FOR CUSTOMERS ON REQUEST: - FLANGE PRESSED WITH OR WITHOUT RIPS (FLAT SITED) - EXTRA STRONG REINFORCED CONSTRUCTION - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOR) OR GALVANIC AND STENCILLED OR STAMPED - DESIGN IN SPECIAL STEEL OR ALUMINIUM - BALANCED - DRIVING HOLES OR DRIVING PINS - FLANGE THICKNESS 0,5 to 8 - DRUM IN PERFORMATED METAL PLATE - SUITABLE FOR AUTOMATIC LOADERS - WITH FLANGE CABLES ACCESS SLOTS

FABRICATION REELS TYPE FRS DIN 46391, DIN 46395 AND DIN 46397 FABRICATION REEL FOR PROCESSING IN ROTATING WINDING MACHINES (DRUM TWISTER) AND HORIZONTAL USE WITH SMOOTH INSIDE FLANGES FOR SOFT COATED

8 FABRICATION REELS TYPE FRS DIN 46391, DIN AND DIN FABRICATION REEL FOR PROCESSING IN ROTATING WINDING MACHINES (DRUM TWISTER) AND HORIZONTAL USE WITH SMOOTH INSIDE FLANGES FOR SOFT COATED CABLES. WE DELIVER THIS REEL ACCORDING TO DIN 43691, DIN AND DIN OR AS INDICATED BY CUSTOMER. AVAILABLE FROM FLANGE DIAMETER 800 UP TO 4900 (STANDARD) OR BIGGER. WE ALSO CAN DELIVER A SHIPPING VERSION OF THIS REEL! AVAILABLE FOR CUSTOMERS ON REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE - KNOCK DOWN REEL (2-4 PARTS) FOR LOW TRANSPORT COSTS - EXTRA STRONG REINFORCED CONSTRUCTION (DRUMTWISTER) - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) OR GALVANICED AND STENCILLED OR STAMPED - BALANCED WITH PROTOCOL - DRIVING HOLES OR DRIVING PINS OR CRANE EYES - DRUM COATED WITH NEOPRENE OR PVC PLATES - SHIPMENT FRAMES - EXTRA DUTY DRUM WITH DRUM RINGS - DRUM IN PERFORATED METAL PLATE FOR DEGASSING - WITH FLANGE CABLE ACCESS SLOTS - DIFFERENT CHOICE OF BUSHINGS AND DESIGNS OF REEL - AVAILABLE IN SPECIAL STEEL OR ALUMINIUM - DRILLED DRUM AND FLANGE POSSIBLE (FOR SMALL RUNNING ERRORS) - ENTRY SPIRAL / CABLE RAMP FOR OPTIMAL CABLE POSITIONING - DATA PLATE OR DOCUMENT POCKET - HEAT TREATMENT - CABLE SLOT - BOARDED CEILING DESIGN

CORRUGATED REEL TYPE CFS DIN 46391, DIN 46395 AND DIN 46397 CORRUGATED REEL FOR PROCESSING IN ROTATING WINDING MACHINES (DRUM TWISTER) AND HORIZONTAL USE WITH CORRUGATED FLANGES.

9 CORRUGATED REEL TYPE CFS DIN 46391, DIN AND DIN CORRUGATED REEL FOR PROCESSING IN ROTATING WINDING MACHINES (DRUM TWISTER) AND HORIZONTAL USE WITH CORRUGATED FLANGES. WE DELIVER THIS REEL ACCORDING TO DIN 43691, DIN AND DIN OR AS INDICATED BY CUSTOMER. AVAILABLE FROM FLANGE DIAMETER 800 UP TO 4900 OR BIGGER. WE ALSO CAN DELIVER A SHIPPING VERSION OF THIS REEL! AVAILABLE FOR CUSTOMERS ON REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE KNOCK DOWN REEL (2-4 PARTS) FOR LOW TRANSPORT COSTS EXTRA STRONG REINFORCED CONSTRUCTION (DRUMTWISTER) PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) OR GALVANICED AND STENCILLED OR STAMPED BALANCED WITH PROTOCOL DRIVING HOLES OR DRIVING PINS OR CRANE EYES DRUM COATED WITH NEOPRENE OR PVC PLATES SHIPMENT FRAMES EXTRA DUTY DRUM WITH DRUM RINGS DRUM IN PERFORATED METAL PLATE FOR DEGASSING WITH FLANGE CABLE ACCESS SLOTS DIFFERENT CHOICE OF BUSHINGS AND DESIGNS OF REEL MADE IN SPECIAL STEEL OR ALUMINIUM DRILLED DRUM POSSIBLE (FOR SMALL RUNNING ERRORS) ENTRY SPIRAL / CABLE RAMP FOR OPTIMAL CABLE POSITIONING DATA PLATES OR DOCUMENT POCKET HEAT TREATMENT CABLE SLOT BOARDED CEILING FLANGES LIGHTNING REELS (a Trade Mark of Speedy Brilliant Hong Kong Ltd.)

10 CONICAL REELS TYPE CR/GS CONICAL REEL WITH ONE OR TWO CONICAL FLANGES. FOR WIRE PROCESS OR INDICATED FOR SINGLE OR MULTITRIP SHIPPING OR REWINDING. WE DELIVER THIS REEL FROM FLANGE DIAMETER 315 TO 1250 OR AS INDICATED BY CUSTOMER. AVAILABLE FOR CUSTOMERS ON REQUEST: - REPLACEABLE AND HARDENED BUSHINGS OF CENTER BORE - EXTRA STRONG REINFORCED CONSTRUCTION - PAINTING IN 2K EPOXYLAQUER (AS WELL IN MULTICOLOUR) OR GALVANICED AND STENCILLED OR STAMPED - AVAILABLE IN SPECIAL STEEL OR ALUMINIUM - BALANCED - DRIVING HOLES OR DRIVING PINS - FLANGE THICKNESS 2 TO 8 - DRUM IN PERFORATED METAL PLATE - SUITABLE FOR AUTOMATIC LOADERS - WITH FLANGE CABLE ACCESS SLOTS - POWDERCOATED - WITH PEDESTAL OR LIFTINGEYES

STATIONS - LIFTING TILTERS / TACKLES - TAKE APART REELS - CONICAL REELS - REELS COATED WITH NEOPRENE OR PVC - POWDER COATING -

11 SPECIAL REELS AND OTHER: WE OFFER IN ADDITION: - REELS FOR WELDING WIRE - REELS FOR CHAINS AND ROPES - REELS FOR SAW WIRE AND COMPRESSION HOSE - PAPERBOARD REELS - PLASTIC REELS - PALETTES FOR REELS - WIRE BASKETS - HANDLING SYSTEMS AND COIL STRAPPING STATIONS - LIFTING TILTERS / TACKLES - TAKE APART REELS - CONICAL REELS - REELS COATED WITH NEOPRENE OR PVC - POWDER COATING - REPAIRING OF REELS ANOTHER CONSTRUCTION DESIRED?? PLEASE ASK OUR SALES DEPARTMENT AND WE WILL FIND FOR YOUR APPLICATION A EQUIVALENT ANSWER.

12 REPAIRING OF REELS WITH A GOOD REPAIRING OF YOUR EXISTING REEL YOU WILL SAVE MONEY AND KEEP THE PLANET GREEN! A GOOD REPAIRING KEEP THE LIFETIME OF YOUR REEL LONGER AND CURT ROW MATERIAL WILL BE SAVED. PLEASE ASK US FOR REPAIRING! RIVAL REELS CAN BE ALSO REPAIRED! REEL BEFORE REPAIRING REEL AFTER REPAIRING

STANDARD MEASUREMENTS: DIN 46395 d 1 d 2 d 3 d 4 d 5 e 1 l 1 l 2 Ksr Ssr 1000 500 102 80 40 160 750 630 4 4 4 1120 560 102 80 40 160 850 710 6 6 5 Ssx 1250 630 102 80 40 160 950 800 6 6 5 1400 710

13 STANDARD MEASUREMENTS: DIN d 1 d 2 d 3 d 4 d 5 e 1 l 1 l 2 Ksr Ssr Ssx FLANGEDIAMETER UP TO 8000 AVAILABLE!!

STANDARD MEASUREMENTS: DIN 46391 Flange-Ø D1 Core-Ø D2 D4-Ø D5-Ø s1 e 800 400 80 40 66 200 1000 500 80 50 66 320 1250 630 80 50 70 320

14 STANDARD MEASUREMENTS: DIN Flange-Ø D1 Core-Ø D2 D4-Ø D5-Ø s1 e

STANDARD MEASUREMENTS: DIN 46397 CENTERBORE: d 1 d 2 d 3 d 4 d 5 e 1 l 1 l 2 Ca.

4,64 250 180 160 127 - - 190 160 3,78 180 10,5 200 69,3 315 224 160 127 16 100 236 200 7,7 355 200 160 127 16 100 212 180 12,2 200 15,1 224 13,3

265 224 24,6 250 30,8 280 27,3 450 315 160 127 28 100 355 280 22,7 500 280 160 127 28 100 300 250 33,7 280 42,5 315 37,5 500 355 160 127 28 100 375

74,4 630 450 160 127 28 100 475 400 61,1 710 400 300 250 40 170 425 355 95,9 400 121,6 450 106,6 710 500 300 250 40 170 530 450 89,8 800 450 300

15 STANDARD MEASUREMENTS: DIN CENTERBORE: d 1 d 2 d 3 d 4 d 5 e 1 l 1 l 2 Ca.Wdvolume dm³ , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , TYPE 1 TYPE 2 TYPE 3 TYPE 4 TYPE 5 TYPE 6 TYPE 7

16 QUESTIONAIRE (FOR TECHNICALITY USE)

17 YOU ARE IN WORRY TO BUY IN CHINA??? YOU ARE IN WORRY ABOUT QUALITY??? NO PROBLEM!! FOR YOUR SAFETY WE CAN OFFER TO YOU FOLLOWING SOLUTIONS IN ADDITION: - QUALITY CHECK IN CHINA BY TÜV OR SGS - QUALITY CHECK BY EXPERT GERMAN ENGINEERS IN CHINA - SAMPLES IN ADVANCE - INSPECTION CERTIFICATE WITH PICTURES OF GOODS - INSURED FORWARDING - SAFETY PACKING, LOADING, SHIPPING - FAIR PAYMENT TERMS - VERY GOOD CONSULTING BY QUALIFIED PERSONNEL

Product catalogue. Mechanical accessories for pumps and mixers

Product catalogue. Mechanical accessories for pumps and mixers Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15