Sandwich nozzle hot test on Vulcain 2 engine.

Size: px
Start display at page:

Download "Sandwich nozzle hot test on Vulcain 2 engine."

Transcription

1 Sandwich nozzle hot test on Vulcain 2 engine. Vulcain 2 Vulcain 2 + Vulcain 1 The information contained in this document is Volvo Aero Corporation Proprietary Information and it shall not either in its original or in any modified form, in whole or in part be reproduced, disclosed to a third party, or used for any purpose other than that for which it is supplied, without the written consent of Volvo Aero Corporation. Any infringement of these conditions will be liable to legal action.

2 Vulcain 2+ Nozzle Demonstrator 2 Reduces cost significantly Increases robustness and reliability TRL 6, Ready to start development Vulcain 2+ Nozzle Demonstrator objectives Vulcain 2+ Nozzle Demonstrator design Comparison of Vulcain 2+ Nozzle Demonstrator with Vulcain 2 Nozzle Results from testing Conclusion

3 What is the Sandwich technology? 3

4 Vulcain 2+ Nozzle Demonstrator Laser welded sandwich identified as most promising to meet commercial requirements lead time, cost & flexibility , Slide 4

5 Milestones for Vulcain 2+ Nozzle Demonstrator With ESA s blessing a trilateral program was initiated to demonstrate a new nozzle technology in full scale on the Vulcain 2 engine Sandwich technology was selected in competition with other technologies for full scale demonstration 2006 PDR 2007 MDR No blocking points identified in reviews with SNSB, CNES, ESA and Snecma, Astrium 2009 The Vulcain 2+ NE Demonstrator run in full scale hot testing at DLR

6 6 Main Overall Objectives for the Vulcain 2+ Nozzle Demonstrator Demonstrate potential for a recurring cost reduction > 30 % Increased reliability, by a simplified design and increased margins Increased robustness Applicability on Vulcain 2 engine and nozzles on future engines (EXP, SC) Engine performance Vulcain 2 engine Improve understanding of reliability margins by e.g. design tool validation, processes & material characterization, new NDT methods

7 Vulcain 2+ NE Demonstrator Definition 7 LMD jacket for axial stability Upper Sandwich Wall Box stiffeners for increased ovalization frequency Lower Sandwich Wall Stiffeners for radial stability

8 What is the Sandwich technology? 8 Major characteristics of the Sandwich Nozzle: Outer cone, laser welded Inner cone, with milled channels with constant mid wall thickness Laser weld Cover sheet Mid wall Flame side Channels milled from a thick sheet

9 Laser cutting of sheet metal Description of Volvo Aero Sandwich Wall Manufacturing sequence Cone Fabrication Channel Milling Channel Wall Assembly 9 Forming of segments Laser welding of segments Bell shape forming

10 Description of Volvo Aero Sandwich Wall Manufacturing sequence 10 Upper Sandwich Wall Lower Sandwich Wall Upper NE assembly Metal deposition Inlet manifold Stiffeners Lower NE assembly Stiffeners Outlet manifold Sandwich NE assy Cone joint Instrumentation Thermal Barrier Coatings

11 Laser Metal Deposition (LMD) 11 Robot laser weld cell Wire based LMD LMD is a robust process with: high quality of deposited material process applicable in the robot weld cell high deposition rate negligible impact on channel geometries low deformation levels

12 Applications of Laser Metal Deposition 12 Upper interface Reinforcement Jacket Stiffener attachment (Upper NE assembly) Cone joint reinforcement

13 Significant product cost reduction compared to Vulcain 2 NE 13 Vulcain 2+ Nozzle Demo How? Effort in concept choice phase Fewer parts Much less manual operations Shorter Manufacturing leadtime. Automated manufacturing and control operations. Vulcain 2 NE

14 Vulcain/Vulcain 2 NE/Vulcain 2 SW Characteristics 14 Cooling structures Parts 456 Tubes 288 Tubes 4 Sheet Metal Cones Weld Starts 100% (TIG) 33% (TIG) 0% (5% before starts and stops are cut-off)

15 Vulcain/Vulcain 2 NE/Vulcain 2 SW Characteristics 15 Reinforcement Jacket Parts N/A ~100 sheet metal parts Solid Laser Metal Deposition Jacket Weld Effort N/A 100% (TIG mostly manual) 30% (Laser - automated)

16 Vulcain/Vulcain 2 NE/Vulcain 2 SW Characteristics 16 TEG system Parts N/A Injector Forgings Inlets Manifold Parts Bulk Heads Cone Joint and cover band Weld Effort N/A Yes (Many welds) 3 welds (automated)

17 Number of components: 17 Vulcain 2 NE Upper cooled wall 288 tubes inserts Vulcain 2+ NE Demonstrator 2 Cones from 4 metal sheets each. Lower cooled wall 1 skirt from 6 metal sheets + TEG (25 parts) 2 Cones from 5 metal sheets each Reinforcements Welded jacket + 25 stiffeners + 5 hat bands LMD Jacket + 31 stiffeners Number of parts total NE

18 Comparison of Design Margins and Performance, Vulcain 2+ Nozzle Demonstrator vs Vulcain 2 Nozzle 18 Life about 2 to 2.5 times longer life for the Demonstrator design Robustness for times higher flight loads the robustness margin is at the same level for the Demonstrator as for Vulcain 2 NE Global Stability higher margin for axial stability and the same margin for radial stability Overall Performance ISP increase > 1.4 s

19 Full scale hot test results of the Vulcain 2+ Nozzle Demonstrator on the ARTA 8 Engine. 19 Sandwich demo nozzle mounted on Vulcain 2 engine. ESAs ARTA 8 campaign at DLR facility in Germany. Two hot test of total 930 s.

20 General test objectives To verify function of the mechanical structure of a sandwich wall with reinforcements for the actual temperature load. Waviness, Ovality, Temperatures with / without TBC 2. To show robustness with respect to operating point Dump flow distribution in upper cone / lower cone, 3. To verify the mechanical properties of the nozzle Eigenfrequency in hot condition, response to loads, Roll moment, 4. To verify the temperatures predicted by calculating tools Hot wall temp (IR photo), coolant temp. Heat load from incipient separation. 5. To evaluate separation margins and side loads.

21 General Objective 1: To verify the function of the mechanical structure of a sandwich wall with reinforcements. 21 Two tests performed, in total 930s run Post test inspection show: No anomalies found Intact sandwich structure Intact stiffening structure No noticeable ovality, nor increased waviness. TBC performed well, no spalling.

22 General objective 2: To show robustness with respect to operating point 22 The operation envelope has been well covered by the operation seen by the NE The NE functioned well in all operation points visited, both in the envelope and in the extreme domain, respectively

23 General objective 3: To verify the mechanical properties of the nozzle 23 Response to transient and operational loads, Structural response of the MD & Cone Joint All strains measured on the MD and cone joint are elastic, except for a high start up peak on cone joint in 90deg. Inlet Manifold Cone Joint MD Jacket

24 General objective 4: To verify the temperature level for correlation of calculation tools 24 The measured hot wall and coolant temperatures are very close to the predicted data both with and without TBC. The pressure drop fits very well with the prediction The actual coolant pressure levels are slightly lower than the values predicted. The predicted pressures used for mechanical analysis are conservative.

25 General objective 5: To evaluate the side load 25 The start up and shut down side-loads are within expectation band and significantly lower than the design load taken into account The down ramping to explore transition to free shock separation below the operating envelope gives no increase in side load for the V2 + Demo, which is better than the spiralling tube nozzle NE tested on same ARTA 8 engine. The down ramping sequence indicates that free shock separation is not present. V2 + Demo NE2-127 Downramping of operating pressure with the same sequence for both NE s

26 Demonstrator Hot-Test Success Criteria 26

27 Vulcain 2+ Nozzle demonstration test on ARTA 8 27 The performance of the sandwich nozzle in the two tests is regarded as a great success! All test success criteria are met. The hardware status after two tests is excellent Non-destructive expertise is in progress at Volvo Aero The nozzle is approved for more test. Next opportunity is on ESAs ARTA 9 campaign.

28 Conclusion 28 The engine test enabled the sandwich technology to reach TRL 6. Ready to start a development. The successful outcome of the Vulcain 2 + Sandwich Nozzle project is a significant risk reduction for further developments. Customer benefits from increased robusteness, increased performance, and of significant cost reduction. All major risks are identified and analysed Further activities for a development are identified The performance of the Vulcain 2 + Nozzle demonstrator in the two test is by all participant regarded as a complete success!

29 Acknowledgements 29 This program has been performed in close collaboration between Volvo Aero and its industrial partners Snecma and EADS Astrium under the auspices of SNSB, CNES, DLR and ESA.

TPS Portfolio Status and Recent Developments

TPS Portfolio Status and Recent Developments TPS Portfolio Status and Recent Developments 7 th 8 th April, 2016 HELSMAC, Downing College, Cambridge, UK Wolfgang P.P. Fischer 1 2 3 4 5 6 INTRODUCTION FLEXIBLE TPS TECHNOLOGIES RIGID TPS TECHNOLOGIES

More information

Avio Aero. Collaborative network established in Clean Sky: a success story

Avio Aero. Collaborative network established in Clean Sky: a success story Avio Aero Collaborative network established in Clean Sky: a success story Information Day: Clean Sky 2 and synergies with Lisboa, 3 rd February 2017 Enrico Casale R&TD - EU Programs GE Proprietary Information

More information

AMBR* Engine for Science Missions

AMBR* Engine for Science Missions AMBR* Engine for Science Missions NASA In Space Propulsion Technology (ISPT) Program *Advanced Material Bipropellant Rocket (AMBR) April 2010 AMBR Status Information Outline Overview Objectives Benefits

More information

Presenter: Sébastien Bourgois (SN)

Presenter: Sébastien Bourgois (SN) Multi point i injection i system development at Snecma Presenter: Sébastien Bourgois (SN) Outline Overview of Multipoint Injection System development at SNECMA Tools used for conception An example: LEMCOTEC

More information

MSFI TECHNOLOGY AT SAFRAN AIRCRAFT

MSFI TECHNOLOGY AT SAFRAN AIRCRAFT MSFI TECHNOLOGY AT SAFRAN AIRCRAFT ENGINES S. BOURGOIS 08/03/2017 Ce document et les informations qu il contient sont la propriété de Safran. Ils ne doivent pas être copiés ni communiqués à un tiers sans

More information

i n t e g r a t e d i n n o v a t i o n

i n t e g r a t e d i n n o v a t i o n i n t e g r a t e d i n n o v a t i o n R O B O T T R A N S F E R U N I T S Welding Robot Robot Transfer Units (RTUs) are an economical means to extend the working envelope of an industrial robot. TranTek

More information

UNCLASSIFIED FY 2017 OCO. FY 2017 Base

UNCLASSIFIED FY 2017 OCO. FY 2017 Base Exhibit R-2, RDT&E Budget Item Justification: PB 2017 Air Force Date: February 2016 3600: Research, Development, Test & Evaluation, Air Force / BA 2: Applied Research COST ($ in Millions) Prior Years FY

More information

IAC-15-C4.3.1 JET INDUCER FOR A TURBO PUMP OF A LIQUID ROCKET ENGINE

IAC-15-C4.3.1 JET INDUCER FOR A TURBO PUMP OF A LIQUID ROCKET ENGINE IAC-15-C4.3.1 JET INDUCER FOR A TURBO PUMP OF A LIQUID ROCKET ENGINE Martin Böhle Technical University Kaiserslautern, Germany, martin.boehle@mv.uni-kl.de Wolfgang Kitsche German Aerospace Center (DLR),

More information

THE FIRST IN-SPACE DEMONSTRATION OF A GREEN PROPULSION SYSTEM

THE FIRST IN-SPACE DEMONSTRATION OF A GREEN PROPULSION SYSTEM THE FIRST IN-SPACE DEMONSTRATION OF A GREEN PROPULSION SYSTEM Presented by: Mathias Persson, CEO ECAPS, Solna, Sweden SSC10-XI-2 Copyright 2010 ECAPS - 1 - Outline 1. Introduction 2. Objectives 3. PRISMA

More information

Innovative Centrifugal Compressor Design

Innovative Centrifugal Compressor Design Innovative Centrifugal Compressor Design L. Tarnowski TURBOMECA groupe SAFRAN INTRODUCTION SP2 : IRA (Intercooled Recuperative Aero-engine) Task 2.2.5 HP Centrifugal Compressor Design The challenge is

More information

LOW SHOCK RELEASE UNIT EASY RESETTABLE AND 100 % REUSABLE. Jens Müller 1, Christoph Zauner 2

LOW SHOCK RELEASE UNIT EASY RESETTABLE AND 100 % REUSABLE. Jens Müller 1, Christoph Zauner 2 LOW SHOCK RELEASE UNIT EAS RESETTABLE AND 100 % REUSABLE Jens Müller 1, Christoph Zauner 2 1 Astrium GmbH, 2 Chair of Lightweight Structures - Technical University of Munich Astrium GmbH, 81663 München

More information

Prediction of Engine Warm-up and Fuel Economy utilizing GT s Customized FE Cylinder Structure Objects

Prediction of Engine Warm-up and Fuel Economy utilizing GT s Customized FE Cylinder Structure Objects Prediction of Engine Warm-up and Fuel Economy utilizing GT s Uliana Bryakina Gerald Seider Frankfurt, October 16, 2016 European GT Conference 2016 InDesA GmbH Carl-Zeiss-Ring 19a D-85737 Ismaning Phone

More information

Corso di Motori Aeronautici

Corso di Motori Aeronautici Corso di Motori Aeronautici Mauro Valorani Laurea Magistrale in Ingegneria Aeronautica (MAER) Sapienza, Università di Roma Anno Accademico 2011-12 Sett. 13: Conclusioni 1 FP7 Aero Engine Scenario ERS Strategy

More information

Pioneering intelligent innovation

Pioneering intelligent innovation Pioneering intelligent innovation Future Technology update Paul Madden Engine Emissions Expert 2016 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied

More information

CFM Technology. realizing the promise 50% LOWER NOX EMISSIONS. ANOTHER LEAP FORWARD FOR LEAP TECHNOLOGY.

CFM Technology. realizing the promise 50% LOWER NOX EMISSIONS. ANOTHER LEAP FORWARD FOR LEAP TECHNOLOGY. 50% LOWER NOX EMISSIONS. CFM Technology realizing the promise ANOTHER LEAP FORWARD FOR LEAP TECHNOLOGY. Bill Brown General Manger CFM Marketing June 2010 CFM International Proprietary Information The information

More information

ADVANCED HIGH-STRENGTH STEEL FRONT RAIL SYSTEM PHASE II

ADVANCED HIGH-STRENGTH STEEL FRONT RAIL SYSTEM PHASE II ADVANCED HIGH-STRENGTH STEEL FRONT RAIL SYSTEM PHASE II John Catterall General Motors Corporation Background Lightweighting initiatives have demonstrated that advanced high strength steels (AHSS) can be

More information

MICRO VIBRATION IMPROVEMENT OF A STEPPER ACTUATED MECHANISM

MICRO VIBRATION IMPROVEMENT OF A STEPPER ACTUATED MECHANISM MICRO VIBRATION IMPROVEMENT OF A STEPPER ACTUATED MECHANISM Horst Kozilek (1), Dr. Bernhard Specht (1), Dr. Sang Soon Yong (2) ; Dr. Sang Gyu Lee (2) (1) EADS Astrium GmbH, Claude-Dornier-Str. 88090 Immenstaad

More information

COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT

COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT COLD PLATE SOFTWARE PROGRAM ANALYZES AIRCRAFT DISPLAY T. Renaud Sanders, a Lockheed Martin Co. Nov, 2000 Introduction Finned heat exchangers, called cold plates, have been used for many years to cool military

More information

HERCULES-2 Project. Deliverable: D8.8

HERCULES-2 Project. Deliverable: D8.8 HERCULES-2 Project Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine Deliverable: D8.8 Study an alternative urea decomposition and mixer / SCR configuration and / or study in extended

More information

Development Status of H3 Launch Vehicle -To compete and survive in the global commercial market-

Development Status of H3 Launch Vehicle -To compete and survive in the global commercial market- 32 Development Status of H3 Launch Vehicle -To compete and survive in the global commercial market- TOKIO NARA *1 TADAOKI ONGA *2 MAYUKI NIITSU *3 JUNYA TAKIDA *2 AKIHIRO SATO *3 NOBUKI NEGORO *4 The H3

More information

PRELIMINARY ACT-2 POWER CORE DESIGN DEFINITION

PRELIMINARY ACT-2 POWER CORE DESIGN DEFINITION PRELIMINARY ACT-2 POWER CORE DESIGN DEFINITION X.R. Wang, C. Koehly, M. S. Tillack, S. Malang and F. Najmabadi ARIES-Pathways Project Meeting Germantown, DC May 21-22, 2013 OVERALL LAYOUT OF THE ACT-2

More information

QUARTER SCALE ROBOTICS POSITOING SYSTEM

QUARTER SCALE ROBOTICS POSITOING SYSTEM ME 4773/5493 Fundamental of Robotics Fall 2016 San Antonio, TX, USA QUARTER SCALE ROBOTICS POSITOING SYSTEM Andres Favela Student San Antonio, TX, USA 78249 Afave91@gmail.com ABSTRACT As of 2015 nearly

More information

RDT&E BUDGET ITEM JUSTIFICATION SHEET (R-2 Exhibit) June 2001

RDT&E BUDGET ITEM JUSTIFICATION SHEET (R-2 Exhibit) June 2001 PE NUMBER: 0603302F PE TITLE: Space and Missile Rocket Propulsion BUDGET ACTIVITY RDT&E BUDGET ITEM JUSTIFICATION SHEET (R-2 Exhibit) June 2001 PE NUMBER AND TITLE 03 - Advanced Technology Development

More information

F-class OpFlex controls advancements

F-class OpFlex controls advancements GE Power & Water F-class OpFlex controls advancements Bob Bellis, F-class/OpFlex Controls Product Manager CTOTF FALL CONFERENCE COEUR D'ALENE, IDAHO SEPTEMBER 20-24, 2015 Imagination at work GE Power &

More information

AVARIS AREVA Valve Repair in-situ Innovative technology and processes

AVARIS AREVA Valve Repair in-situ Innovative technology and processes AVARIS AREVA Valve Repair in-situ Innovative technology and processes Christophe Schultz Project Manager GmbH 31.05.2012 Bulatom 2012, Varna The AVARIS history In October 2009, Isar 2 asked AREVA to develop

More information

37 partners 13 countries - 4 years - 26 M

37 partners 13 countries - 4 years - 26 M 37 partners 13 countries - 4 years - 26 M SONACA NUMECA EEC TCD ADSE NLR VOLVO FOI Chalmers KTH EADS M IBK DLR IoA RRUK ARA CU ISVR DASSAV ECL LMFA ONERA SM CNRS INRIA SENER CFS RUAG EPFL ALA Uni-NA DPA

More information

Status of HPLWR Development

Status of HPLWR Development Status of HPLWR Development Thomas Schulenberg SCWR System Steering Committee Karlsruhe Institute of Technology Germany What is a Supercritical Water Cooled Reactor? PH HP IP LP PH Produces superheated

More information

Development of a Self-latching Hold-down RElease Kinematic (SHREK)

Development of a Self-latching Hold-down RElease Kinematic (SHREK) Development of a Self-latching Hold-down RElease Kinematic (SHREK) Ruggero Cassanelli * Abstract SHREK (Self-latching Hold-down Release Kinematic), is an innovative shape memory actuated hold down and

More information

Power-GEN Middle East

Power-GEN Middle East Power-GEN Middle East High efficiency gas turbine testing & validation Marcus H. Scholz Abu Dhabi, UAE 12-14, October 2014 GE Power & Water 2014, General Electric Company. GE Proprietary Information -

More information

PERM injection system Development. PERM injection system Validation

PERM injection system Development. PERM injection system Validation PERM injection system Development AVIO, Antonio Peschiulli KIT, Nikos Zarzalis PERM injection system Validation ENGINSOFT, Lorenzo Bucchieri ONERA, Isabel Da Costa DGA, Vincent Plana Index 1. Introduction

More information

Technology Application to MHPS Large Frame F series Gas Turbine

Technology Application to MHPS Large Frame F series Gas Turbine 11 Technology Application to MHPS Large Frame F series Gas Turbine JUNICHIRO MASADA *1 MASANORI YURI *2 TOSHISHIGE AI *2 KAZUMASA TAKATA *3 TATSUYA IWASAKI *4 The development of gas turbines, which Mitsubishi

More information

Nuclear Thermal Propulsion (NTP) Engine Component Development

Nuclear Thermal Propulsion (NTP) Engine Component Development Nuclear Thermal Propulsion (NTP) Engine Component Development Presented to the NETS 2015 Conference O. Mireles, K. Benenski, J. Buzzell, D. Cavender, J. Caffrey, J. Clements, W. Deason, C. Garcia, C. Gomez,

More information

Cooling System Simulation for Indian Utility Vehicle using COOL3D

Cooling System Simulation for Indian Utility Vehicle using COOL3D Indian GT SUITE Conference 2013 Cooling System Simulation for Indian Utility Vehicle using COOL3D Paper presented by Rishabh Pandey, M&M Gopakishore Gummadi, M&M Copyright 2012 Mahindra & Mahindra Ltd.

More information

Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design

Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design STAR Japanese Conference 2013 December 3, Yokohama, Japan Engineering Success by Application of STAR-CCM+ for Modern Gas Turbine Design Norbert Moritz, Karsten Kusterer, René Braun, Anis Haj Ayed B&B-AGEMA

More information

SIMULATION AND EVALUATION OF ENGINE FRICTION EUROPEAN GT CONFERENCE, FRANKFURT/MAIN, OCTOBER 9TH, 2017

SIMULATION AND EVALUATION OF ENGINE FRICTION EUROPEAN GT CONFERENCE, FRANKFURT/MAIN, OCTOBER 9TH, 2017 SIMULATION AND EVALUATION OF ENGINE FRICTION EUROPEAN GT CONFERENCE, FRANKFURT/MAIN, OCTOBER 9TH, 2017 Prof. Dr.-Ing. Peter Steinberg, BTU Cottbus M.Sc. Oleg Krecker, PhD candidate, BMW AGENDA 1 2 3 4

More information

A Large Modern High Speed Reciprocating Compressor

A Large Modern High Speed Reciprocating Compressor Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 1998 A Large Modern High Speed Reciprocating Compressor H. H. Van der Linden Grasso Products

More information

Additive Manufacturing in ITP

Additive Manufacturing in ITP Additive Manufacturing in ITP María Sierra Materials & Processes Dept. Jornada de fabricación aditiva de componentes metálicos IK4-LORTEK 27 Noviembre 2013 1 INDEX COMPANY PRESENTATION ADDITIVE MANUFACTURING

More information

FUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS

FUNDAMENTAL SAFETY OVERVIEW VOLUME 2: DESIGN AND SAFETY CHAPTER E: THE REACTOR COOLANT SYSTEM AND RELATED SYSTEMS PAGE : 1 / 13 4. PRESSURISER 4.1. DESCRIPTION The pressuriser (PZR) is a pressurised vessel forming part of the reactor coolant pressure boundary (CPP) [RCPB]. It comprises a vertical cylindrical shell,

More information

Optimizing the life of Cut-Off Wheels: a study of variables when using cut-off wheels on a right angle grinder

Optimizing the life of Cut-Off Wheels: a study of variables when using cut-off wheels on a right angle grinder Industrial Abrasives Optimizing the life of Cut-Off Wheels: a study of variables when using cut-off wheels on a right angle grinder By Peter Boen, technical team leader Application Engineer surface finishing

More information

CS2 Fast Rotorcraft NGCTR Objectives

CS2 Fast Rotorcraft NGCTR Objectives CS2 Fast Rotorcraft NGCTR Objectives The main objectives for the Clean Sky 2 NextGenCTR Programme (Next Generation Civil Tiltrotor - NGCTR) are the following: Validation of key tiltrotor technologies for

More information

Innovative Mars exploration rover using inflatable or unfolding wheels

Innovative Mars exploration rover using inflatable or unfolding wheels In Proceedings of the 9th ESA Workshop on Advanced Space Technologies for Robotics and Automation 'ASTRA 2006' ESTEC, Noordwijk, The Netherlands, November 28-30, 2006 Innovative Mars exploration rover

More information

Analysis of Composite Materials with Abaqus

Analysis of Composite Materials with Abaqus Analysis of Composite Materials with Abaqus Day 1 Lecture 1 Lecture 2 Lecture 3 Workshop 1 Lecture 4 Workshop 2a Workshop 2b Workshop 3 Introduction Macroscopic Modeling Mixed Modeling The Pagano Plate

More information

An Advanced Fueling Algorithm The MC Method. Ryan Harty and Steve Mathison Honda R&D Americas, Inc

An Advanced Fueling Algorithm The MC Method. Ryan Harty and Steve Mathison Honda R&D Americas, Inc An Advanced Fueling Algorithm The MC Method Ryan Harty and Steve Mathison Honda R&D Americas, Inc Outline 2 Need for Advanced Fueling Algorithm What An Advanced Algorithm Should Be MC Method Development

More information

OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018

OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 M.Sc. Oleg Krecker, PhD candidate, BMW B.Eng. Christoph Hiltner, Master s student, Affiliation BMW AGENDA

More information

Manufacturing Implications within. new DODI (Dec 8, 2008) Summary for Industry. National Center For Advanced Technologies.

Manufacturing Implications within. new DODI (Dec 8, 2008) Summary for Industry. National Center For Advanced Technologies. Manufacturing Implications within new DODI 5000.02 (Dec 8, 2008) Summary for Industry Mark Gordon National Center For Advanced Technologies Overview DoDI 5000.02 represents an instruction for the operation

More information

Cosmetic sealing. paint shop. Atlas Copco s SCA product line provides high-quality cosmetic sealing solutions

Cosmetic sealing. paint shop. Atlas Copco s SCA product line provides high-quality cosmetic sealing solutions Cosmetic sealing in Cosmetic paint shop sealing Atlas Copco s SCA product line provides high-quality cosmetic sealing solutions Meeting highest demands in paint shop Sealing and sound dampening applications

More information

A Recommended Approach to Pipe Stress Analysis to Avoid Compressor Piping Integrity Risk

A Recommended Approach to Pipe Stress Analysis to Avoid Compressor Piping Integrity Risk A Recommended Approach to Pipe Stress Analysis to Avoid Compressor Piping Integrity Risk by: Kelly Eberle, P.Eng. Beta Machinery Analysis Calgary, AB Canada keberle@betamachinery.com keywords: reciprocating

More information

FALCON. T H E E C O N O M I C A L S O L U T I O N. R E L I A B L E A N D E F F I C I E N T.

FALCON. T H E E C O N O M I C A L S O L U T I O N. R E L I A B L E A N D E F F I C I E N T. FALCON. T H E E C O N O M I C A L S O L U T I O N. R E L I A B L E A N D E F F I C I E N T. FALCON. The best cost-benefit ratio for your success. The robust FALCON machine can be used for plasma, oxyfuel,

More information

Preliminary Detailed Design Review

Preliminary Detailed Design Review Preliminary Detailed Design Review Project Review Project Status Timekeeping and Setback Management Manufacturing techniques Drawing formats Design Features Phase Objectives Task Assignment Justification

More information

Development of a Low Cost Suborbital Rocket for Small Satellite Testing and In-Space Experiments

Development of a Low Cost Suborbital Rocket for Small Satellite Testing and In-Space Experiments Development of a Low Cost Suborbital Rocket for Small Satellite Testing and In-Space Experiments Würzburg, 2015-09-15 (extended presentation) Dr.-Ing. Peter H. Weuta Dipl.-Ing. Neil Jaschinski WEPA-Technologies

More information

Propeller Blade Bearings for Aircraft Open Rotor Engine

Propeller Blade Bearings for Aircraft Open Rotor Engine NTN TECHNICAL REVIEW No.84(2016) [ New Product ] Guillaume LEFORT* The Propeller Blade Bearings for Open Rotor Engine SAGE2 were developed by NTN-SNR in the frame of the Clean Sky aerospace programme.

More information

PIPELINE REPAIR OF CORROSION AND DENTS: A COMPARISON OF COMPOSITE REPAIRS AND STEEL SLEEVES

PIPELINE REPAIR OF CORROSION AND DENTS: A COMPARISON OF COMPOSITE REPAIRS AND STEEL SLEEVES Proceedings of the 2014 10th International Pipeline Conference IPC2014 September 29 - October 3, 2014, Calgary, Alberta, Canada IPC2014-33410 PIPELINE REPAIR OF CORROSION AND DENTS: A COMPARISON OF COMPOSITE

More information

SSI Technologies MediaSensor

SSI Technologies MediaSensor SSI Technologies MediaSensor P51 Pressure Transducers Product Description SSI s line of bulk micro-machined, absolute and gage pressure transducers and transmitters for both harsh and benign media with

More information

Annual Report Summary Green Regional Aircraft (GRA) The Green Regional Aircraft ITD

Annual Report Summary Green Regional Aircraft (GRA) The Green Regional Aircraft ITD Annual Report 2011 - Summary Green Regional Aircraft (GRA) The Green Regional Aircraft ITD Green Regional Aircraft ITD is organised so as to: 1. develop the most promising mainstream technologies regarding

More information

Milling spindles / H line Up to speed fast: Dynamic and robust for high loads

Milling spindles / H line Up to speed fast: Dynamic and robust for high loads Milling spindles / H line Up to speed fast: Dynamic and robust for high loads SPINDLE TECHNOLOGY I SYSTEM TECHNOLOGY I DRIVE TECHNOLOGY I SERVICE SOLUTIONS www.kessler-group.biz Specialist partner KESSLER

More information

Case Study Pulsating Heat Pipes By The Peregrine Falcon Corporation

Case Study Pulsating Heat Pipes By The Peregrine Falcon Corporation 1051 Serpentine Lane, Ste. 100, Pleasanton, CA 94566-8451 phone 925/461-6800, x102 fax 925/461-6804 www.peregrinecorp.com email: rhardesty@pereginecorp.com Case Study Pulsating Heat Pipes By The Peregrine

More information

Hybrid Materials and Construction Principles for Aero Engine Components. Materials 2006

Hybrid Materials and Construction Principles for Aero Engine Components. Materials 2006 Hybrid Materials and Construction Principles for Aero Engine Components Materials Day@ILA 2006 Frank Kocian,, Joachim Hausmann DLR German Aerospace Center Folie 1 BDLI 2006 Kocian 17.05.2006 Content Hybrid

More information

Thermal Hydraulics Design Limits Class Note II. Professor Neil E. Todreas

Thermal Hydraulics Design Limits Class Note II. Professor Neil E. Todreas Thermal Hydraulics Design Limits Class Note II Professor Neil E. Todreas The following discussion of steady state and transient design limits is extracted from the theses of Carter Shuffler and Jarrod

More information

Internal Combustion Engines ERTRAC Workshop, 2 June Project title: CORE. Coordinator Johan Engström, Volvo. Status May 2015

Internal Combustion Engines ERTRAC Workshop, 2 June Project title: CORE. Coordinator Johan Engström, Volvo. Status May 2015 Internal Combustion Engines ERTRAC Workshop, 2 June 2015 Project title: CORE CO 2 REduction for long distance transport Coordinator Johan Engström, Volvo Status May 2015 Project general information CORE

More information

DEMO FUSION CORE ENGINEERING: Blanket Integration and Maintenance

DEMO FUSION CORE ENGINEERING: Blanket Integration and Maintenance DEMO FUSION CORE ENGINEERING: Blanket Integration and Maintenance 1.) Overview on European Blanket Concepts and Integration principles 2.) Large Module Integration 3.) Multi Module Segment (MMS) Integration

More information

Pressurized Air Cooled Generators

Pressurized Air Cooled Generators PGI Orlando Dec. 13, 2016 Pressurized Air Cooled Generators Mike Zborovsky New App Generator Portfolio Owner siemens.com Pressurized Air-Cooled Generator (SGenX-2000P) Table of content Introduction 3 Portfolio

More information

ITER Shield Blanket Design Activities At SWIP

ITER Shield Blanket Design Activities At SWIP 1 ITER Shield Blanket Design Activities At SWIP F. Zhang 1), W. S. Kang 1), J. H. Wu 1), Y. K. Fu 1), J. M. Chen 1) F. Elio 2) 1) Southwestern Institute of Physics, P. O. Box 432 Chengdu, 610041, China

More information

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS

APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS APPLICATION OF STAR-CCM+ TO TURBOCHARGER MODELING AT BORGWARNER TURBO SYSTEMS BorgWarner: David Grabowska 9th November 2010 CD-adapco: Dean Palfreyman Bob Reynolds Introduction This presentation will focus

More information

NEWAC Overall Specification, Assessment and Concept Optimization

NEWAC Overall Specification, Assessment and Concept Optimization NEWAC Overall Specification, Assessment and Concept Optimization Andrew Rolt, Rolls-Royce plc. with contributions from: Konstantinos Kyprianidis, Cranfield University; Stefan Donnerhack and Wolfgang Sturm,

More information

Analysis of Composite Materials with Abaqus 6.14

Analysis of Composite Materials with Abaqus 6.14 Analysis of Composite Materials with Abaqus 6.14 About this Course Course objectives Upon completion of this course you will be able to: Define anisotropic elasticity for combining the fiber-matrix response

More information

AN OPTIMIZED PROPULSION SYSTEM FOR Soyuz/ST

AN OPTIMIZED PROPULSION SYSTEM FOR Soyuz/ST 1 RD-0124 AN OPTIMIZED PROPULSION SYSTEM FOR Soyuz/ST Versailles, May 14,2002 Starsem Organization 2 35% 25% 15% 25% 50-50 European-Russian joint venture providing Soyuz launch services for the commercial

More information

Analyzing the Thermal Operating Conditions of a Solenoid

Analyzing the Thermal Operating Conditions of a Solenoid A CASE STUDY FROM SOLENOID SYSTEMS Analyzing the Thermal Operating Conditions of a Solenoid BACKGROUND When designing a Solenoid the operating temperature of the Coil must be taken into account when assessing

More information

High Performance Green Propulsion (HPGP): A Flight-Proven Capability and Cost Game-Changer for Small and Secondary Satellites Aaron Dinardi

High Performance Green Propulsion (HPGP): A Flight-Proven Capability and Cost Game-Changer for Small and Secondary Satellites Aaron Dinardi High Performance Green Propulsion (HPGP): A Flight-Proven Capability and Cost Game-Changer for Small and Secondary Satellites Aaron Dinardi 26 th AIAA/USU Small Satellite Conference 14 August 2012 Outline

More information

BALL BEARING TESTS TO EVALUATE DUROID REPLACEMENTS

BALL BEARING TESTS TO EVALUATE DUROID REPLACEMENTS BALL BEARING TESTS TO EVALUATE DUROID REPLACEMENTS M J Anderson, ESTL, AEA Technology Space, RD1/164 Birchwood Technology Park, Warrington, UK WA3 6AT Tel: +44 1925 253087 Fax: +44 1925 252415 e-mail:

More information

NUCLEAR POWER INDUSTRY

NUCLEAR POWER INDUSTRY FLOW BALANCING The objective of the simulation is to model the flow rates through the respective distribution holes of the inlet manifold. This was required to initially determine the appropriate size

More information

TORSIONAL VIBRATION MODELLING AND ANALYSIS CONTINUED. Beta Machinery Analysis Ltd., Calgary, AB, Canada, T3C 0J7 ABSTRACT

TORSIONAL VIBRATION MODELLING AND ANALYSIS CONTINUED. Beta Machinery Analysis Ltd., Calgary, AB, Canada, T3C 0J7 ABSTRACT TORSIONAL VIBRATION MODELLING AND ANALYSIS CONTINUED Rodney R. Varty, B.Sc. Project Analyst John D. Harvey, P.Eng Training Manager Beta Machinery Analysis Ltd., Calgary, AB, Canada, T3C 0J7 ABSTRACT The

More information

Building Blocks and Opportunities for Power Electronics Integration

Building Blocks and Opportunities for Power Electronics Integration Building Blocks and Opportunities for Power Electronics Integration Ralph S. Taylor APEC 2011 March 8, 2011 What's Driving Automotive Power Electronics? Across the globe, vehicle manufacturers are committing

More information

Welcome to GKN Aerospace. 23 rd January 2014

Welcome to GKN Aerospace. 23 rd January 2014 Welcome to GKN Aerospace 23 rd January 2014 GKN Aerospace $3.5 billion International Aerospace enterprise 35 sites, 12,000 people Kevin Cummings CEO GKN Aerospace Daniele Cagnatel GKN Aerospace Aerostructures

More information

Abaqus Technology Brief. Prediction of B-Pillar Failure in Automobile Bodies

Abaqus Technology Brief. Prediction of B-Pillar Failure in Automobile Bodies Prediction of B-Pillar Failure in Automobile Bodies Abaqus Technology Brief TB-08-BPF-1 Revised: September 2008 Summary The B-pillar is an important load carrying component of any automobile body. It is

More information

Fuel Cell Systems For Aeronautic Applications A Clean Way from Kerosene to Energy

Fuel Cell Systems For Aeronautic Applications A Clean Way from Kerosene to Energy DGLR / VDI / RAeS Vortragsreihe an der HAW / Berliner Tor Presented by O 2 + - H 2 Hans-Jürgen Heinrich Manager Engineering H 2 O Fuel Cell Systems For Aeronautic Applications A Clean Way from Kerosene

More information

U.S. BACKGROUND IN ITER FUELING SYSTEMS AND FUTURE CONTRIBUTIONS

U.S. BACKGROUND IN ITER FUELING SYSTEMS AND FUTURE CONTRIBUTIONS U.S. BACKGROUND IN ITER FUELING SYSTEMS AND FUTURE CONTRIBUTIONS S.K. Combs, 1 L.R. Baylor, 1 B.E. Chapman, 2 P.W. Fisher, 1 M.J. Gouge, 1 M. Greenwald, 3 T.J. Jernigan, 1 W.A. Houlberg, 1 P.B. Parks,

More information

Design Impact of Wurster Coating Spray Nozzles

Design Impact of Wurster Coating Spray Nozzles WHITE PAPER Design Impact of Wurster Coating Spray Nozzles Comparison of Schlick HS/04 and Glatt LD-nozzle This document contains information that is the sole proprietary information of Glatt and may not

More information

Innovation Takes Off. Not legally binding

Innovation Takes Off. Not legally binding Innovation Takes Off Not legally binding Clean Sky 2 Information Day dedicated to the 1 st Call for Proposals (CFP01) Innovation Takes Off Engine ITD François Mirville, SAFRAN/Snecma Keith Nurney, Rolls-Royce

More information

ARENA Fiber Reinforced Plastic Structures with Functional Integration

ARENA Fiber Reinforced Plastic Structures with Functional Integration DLR.de slide 1 ARENA2036 - Fiber Reinforced Plastic Structures with Functional Integration Institute of Vehicle Concepts, DLR Stuttgart Sebastian Vohrer, Gundolf Kopp, Prof. H. E. Friedrich Daimler AG

More information

Structural Analysis Of Reciprocating Compressor Manifold

Structural Analysis Of Reciprocating Compressor Manifold Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2016 Structural Analysis Of Reciprocating Compressor Manifold Marcos Giovani Dropa Bortoli

More information

Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems

Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems TECHNICAL REPORT Development of Rattle Noise Analysis Technology for Column Type Electric Power Steering Systems S. NISHIMURA S. ABE The backlash adjustment mechanism for reduction gears adopted in electric

More information

Sealing Technologies & Solutions

Sealing Technologies & Solutions Sealing Technologies & Solutions Save weight, space, time and money! High Integrity Sealing Vector Techlok Clamp Connector A radially-bolted mechanical pipe connection which allows quick make-up and break-out

More information

Appendix B. Chapter 11. by Resonance

Appendix B. Chapter 11. by Resonance Appendix B. Chapter 11. Fan Housing Vibration Caused by Resonance Application of Modal & Vibration Analysis Ken Singleton KSC Consulting LLC Background Four FD fans were installed at the site to meet environmental

More information

European Bus System of the Future 2

European Bus System of the Future 2 European Bus System of the Future 2 21 st March 2017 Umberto Guida, UITP @ebsf_2project Advanced solutions for improved efficiency and attractiveness of bus systems H2020 Innovation Action, May 2015 April

More information

Robot upkeep. by Terry Tupper, senior engineer, material joining segment, Fanuc America Inc. Maintenance tips for a robotic arc welding cell

Robot upkeep. by Terry Tupper, senior engineer, material joining segment, Fanuc America Inc. Maintenance tips for a robotic arc welding cell Robot upkeep by Terry Tupper, senior engineer, material joining segment, Fanuc America Inc. Maintenance tips for a robotic arc welding cell THE DAILY SHOW Starting with the robot and controller, what are

More information

Application Note Thermal Mass Flow Sensor FS7

Application Note Thermal Mass Flow Sensor FS7 1. 3 1.1 About the Sensor 3 1.2 Benefits and Characteristics 3 1.3 Application Areas 3 1.4 Sensor Structure 3 1.5 Measurement Principle 5 1.6 Dimensions and Housing 5 1.7 Mounting 6 1.8 Delivery and Content

More information

Status of Research Work of EEVC WG 15 Compatibility Between Cars

Status of Research Work of EEVC WG 15 Compatibility Between Cars Informal dovument No. GRSP-34-21 (34 th GRSP, 8-12 December 2003, Agenda item A.6.) EEVC WG 15, Compatibility Between Cars Status of Research Work of EEVC WG 15 Compatibility Between Cars Eberhard Faerber

More information

Catalytic Combustor for Ultra-Low NOx Advanced Industrial Gas Turbines

Catalytic Combustor for Ultra-Low NOx Advanced Industrial Gas Turbines Catalytic Combustor for Ultra-Low NOx Advanced Industrial Gas Turbines March 12-14, 2002 Microturbine & Industrial Gas Turbines Peer Review Meeting Fairfax, VA Solicitation No:DE-SC02-00CH11000 Dr. Shahrokh

More information

Overview of LSTC s LS-DYNA Anthropomorphic Models

Overview of LSTC s LS-DYNA Anthropomorphic Models Overview of LSTC s LS-DYNA Anthropomorphic Models Christoph Maurath, Sarba Guha, Dilip Bhalsod, Mike Burger, Jacob Krebs, Suri Bala Livermore Software Technology Corporation Sebastian Stahlschmidt, Reuben

More information

Solar Electric Propulsion Benefits for NASA and On-Orbit Satellite Servicing

Solar Electric Propulsion Benefits for NASA and On-Orbit Satellite Servicing Solar Electric Propulsion Benefits for NASA and On-Orbit Satellite Servicing Therese Griebel NASA Glenn Research Center 1 Overview Current developments in technology that could meet NASA, DOD and commercial

More information

ENGINE Demonstration Programmes in Clean Sky & Clean Sky 2

ENGINE Demonstration Programmes in Clean Sky & Clean Sky 2 ENGINE Demonstration Programmes in Clean Sky & Clean Sky 2 Jean-François BROUCKAERT SAGE & ENGINES ITD Project Officer Aerodays 2015, London, 20-23 October 2015 Innovation Takes Off Outline 1. Open-Rotor

More information

AFRL Rocket Lab Technical Overview

AFRL Rocket Lab Technical Overview AFRL Rocket Lab Technical Overview 12 Sept 2016 Integrity Service Excellence Dr. Joseph Mabry Deputy for Science, Rocket Propulsion Division AFRL Rocket Lab Rocket Propulsion for the 21 st Century (RP21)

More information

COOPERATIVE PATENT CLASSIFICATION

COOPERATIVE PATENT CLASSIFICATION CPC - F02F - 2014.07 - Interleaved - page 1 CPC COOPERATIVE PATENT CLASSIFICATION F02F CYLINDERS, PISTONS OR CASINGS, FOR COMBUSTION ENGINES; ARRANGEMENTS OF SEALINGS IN COMBUSTION ENGINES ( specially

More information

EN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives

EN. SKF Grease Spraying System For Large Open Gears. Extend the lifetime of large gear drives 1-4012-EN SKF Grease Spraying System For Large Open Gears Extend the lifetime of large gear drives Gear drives Large gear drives are used to transmit movement under very heavy loads. They are open gear

More information

HERGOTT Julien & MOISY Alexandre EHRS modelling with GT-Suite European GT Conference 2015

HERGOTT Julien & MOISY Alexandre EHRS modelling with GT-Suite European GT Conference 2015 HERGOTT Julien & MOISY Alexandre 26-10 - 2015 EHRS modelling with GT-Suite European GT Conference 2015 Reduce CO2 by more than 50% in Europe, USA and China between 2005 and 2025 Average CO2 emissions from

More information

Experimental Verification of Low Emission Combustor Technology at DLR

Experimental Verification of Low Emission Combustor Technology at DLR www.dlr.de Chart 1 > FORUM-AE Non-CO2 mitigation technology Workshop> Hassa > 2.7.2014 Experimental Verification of Low Emission Combustor Technology at DLR Christoph Hassa Institute of Propulsion Technology

More information

Adams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil

Adams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil Adams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil By Brian Edwards, Vehicle Dynamics Group, Pratt and Miller Engineering, USA 22 Engineering Reality Magazine Multibody Dynamics

More information

POWERTRAIN SOLUTIONS FOR ELECTRIFIED TRUCKS AND BUSES

POWERTRAIN SOLUTIONS FOR ELECTRIFIED TRUCKS AND BUSES POWERTRAIN SOLUTIONS FOR ELECTRIFIED TRUCKS AND BUSES PDiM 2017 (Heimo Schreier) Burak Aliefendioglu Fredrik Haag AVL H. Schreier, B Aliefendioglu, F. Haag PDIM 2017 30 November 2017 1 TRUCK & BUS ELECTRIFICATION

More information

2014 GREAT DESIGNS IN STEEL CONFERENCE Wednesday, May 14 th 2014

2014 GREAT DESIGNS IN STEEL CONFERENCE Wednesday, May 14 th 2014 2014 GREAT DESIGNS IN STEEL CONFERENCE Wednesday, May 14 th 2014 2015 Ford Mustang This image cannot currently be display ed. Shawn Morgans Technical Leader & Front End / Under Body Applications Manager

More information

SIXTH FRAMEWORK PROGRAMME PRIORITY 4 AERONAUTICS AND SPACE SPECIFIC TARGETED RESEARCH PROJECT TLC

SIXTH FRAMEWORK PROGRAMME PRIORITY 4 AERONAUTICS AND SPACE SPECIFIC TARGETED RESEARCH PROJECT TLC SIXTH FRAMEWORK PROGRAMME PRIORITY 4 AERONAUTICS AND SPACE SPECIFIC TARGETED RESEARCH PROJECT TLC Towards Lean Combustion Start : 1st March 2005 / Budget : 7,5 Meuros EC Scientific Officer : Daniel Chiron

More information