Cetane ID 510. Customer Presentation. Refining. Petrochemical

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Cetane ID 510. Customer Presentation. Refining. Petrochemical"

Transcription

1 Refining Cetane ID 510 Customer Presentation Petrochemical

2 Cetane ID 510 Easy to use One button operation Fully automated Test Fully automated Calibration High pressure injector for better combustion Improved precision with Patented Multi Point ID measurement Ideal for samples with Cetane Improver All types of Biodiesel and Biodiesel blend

3 Easy to start a test with CID 510 Push Test button Introduce the sample and seal Sample Reservoir Sample volume 160ml Enter Sample ID Push Run Button

4 Test and Result Screen View detailed status of test anytime Show only relevant result data at test end Test time 30 min

5 Unique Combustion Chamber Electronically controlled High Pressure Injector for finer droplet size Multiple nozzles for better fuel evaporation and mixing with air Simulates Real World injection systems of modern Diesel engines Wider combustion chamber for less wall spray No Carry Over Effect

6 Pressure (bar) - Patented Multi Point Ignition Delay measurement P for ID2 2 P for ID1 1 Dynamnic Pressure Curves Fuel 1 = 42 DCN Fuel 2 = 58 DCN Fuel 3 = 46 DCN Fuel 4 = 62 DCN ID1 ID Time (ms) If we look only to ID1 we measure Fuel 2 and Fuel 3 as the same DCN but in fact there is a difference of 12 DCN Only ID1 + ID2 measurement can predict the correct DCN compared to ASTM D613

7 Cetane ID 510 Round Robin Precision Comparisons ASTM D 613 Precision from the method DCN r R ASTM D 6890 Precision from the method PAC Cetane ID 510 DCN r R DCN r R The PAC Cetane ID 510 precision is much better than that of other CVCC methods and better than the CFR Engine

8 Cetane ID 510 Round Robin Conclusion The pressure wave using a modern injector produces a two step pressure graph which results in more information about initiation reactions Single Point ID measurement does not appear to be satisfactory for DCN determination of all types of samples The patented Multi Point ID measurement of the Cetane ID 510 is a better predictor of DCN

9 DCN No Carry-Over effect with Cetane ID , ,3 53,2 53,5 53, No EHN No EHN 1500 PPM EHN No EHN No EHN The Cetane ID 510 has no Carry-Over Effect from previous sample.

10 Automatic Calibration For the automatic Unit Calibration you just need to run the calibration fluid Mixture of 50:50 by weight of hexadecane and 2,2,4,4,6,8,8 hepta-methyl-nonane The computer automatically adjusts Injection Time and Combustion Chamber temperature until ID1 and ID2 produce the desired times. Chamber Pressure and quantity of oxidant are a constant.

11 Protection Features of Cetane ID 510 Built in Fire Monitoring and Suppression System Over Pressure protection for Combustion Chamber CVCC Heaters guarded by Thermal Fuse. Over Pressure protection for Injection System Fuel level detection to avoid the Injection System from running dry Detection for coolant flow Heaters will be shut down if coolant is not flowing

12 Other Features of Cetane ID 510 Stand-Alone-Unit (no PC required) Easy sample introduction by beaker or syringe Built-in Fuel Filter Automatic leak test Database for the last 100 results with all test details Built-in Printer Flexible Report formats from DCN result only up to full report with all ignition delay times Data Export to Excel by USB Stick

13 Actual Status of Cetane ID 510 Round Robin confirmed better precision compared to competition and CFR Engine Round Robin confirmed better correlation to CFR Engine ASTM D613 ASTM method for Cetane ID 510 in process

14 External Supply Circulation Cooler 260 Watt Nitrogen 8-10 bar Synthetic Air for combustion 21 to 25 bar Power 230V or 115V 50/60Hz

15 Summary of Cetane ID 510 Easy to use One Button operation Fully automated Test Fully automated Calibration procedure High pressure multiple nozzle injector for better simulation of Real World engines Better fuel distribution and finer droplet size better more repeatable combustion Improved precision and correlation to CFR Engine D613 with Multi Point ID measurement Ideal for samples with Cetane Improver All types of Biodiesel and Biodiesel Blends

Overview & Perspectives for Internal Combustion Engine using STAR-CD. Marc ZELLAT

Overview & Perspectives for Internal Combustion Engine using STAR-CD. Marc ZELLAT Overview & Perspectives for Internal Combustion Engine using STAR-CD Marc ZELLAT TOPICS Quick overview of ECFM family models Examples of validation for Diesel and SI-GDI engines Introduction to multi-component

More information

MIXTURE FORMATION IN SPARK IGNITION ENGINES. Chapter 5

MIXTURE FORMATION IN SPARK IGNITION ENGINES. Chapter 5 MIXTURE FORMATION IN SPARK IGNITION ENGINES Chapter 5 Mixture formation in SI engine Engine induction and fuel system must prepare a fuel-air mixture that satisfiesthe requirements of the engine over its

More information

Project Reference No.: 40S_B_MTECH_007

Project Reference No.: 40S_B_MTECH_007 PRODUCTION OF BIODIESEL FROM DAIRY WASH WATER SCUM THROUGH HETEROGENEOUS CATALYST AND PERFORMANCE EVALUATION OF TBC DIESEL ENGINE FOR DIFFERENT DIESEL AND METHANOL BLEND RATIOS Project Reference No.: 40S_B_MTECH_007

More information

White Paper.

White Paper. The Advantage of Real Atmospheric Distillation Complying with the ASTM D7345 Test Method in the Distillation Process Introduction / Background In the past, refiners enjoyed a constant supply of the same

More information

Flow Reactors for Validation Data Base Development

Flow Reactors for Validation Data Base Development Flow Reactors for Validation Data Base Development Frederick L. Dryer Mechanical and Aerospace Engineering Princeton University 27 AFOSR MURI Kick-Off Meeting Generation of Comprehensive Surrogate Kinetic

More information

Theoretical Study of the effects of Ignition Delay on the Performance of DI Diesel Engine

Theoretical Study of the effects of Ignition Delay on the Performance of DI Diesel Engine Theoretical Study of the effects of Ignition Delay on the Performance of DI Diesel Engine Vivek Shankhdhar a, Neeraj Kumar b a M.Tech Scholar, Moradabad Institute of Technology, India b Asst. Proff. Mechanical

More information

Cetane Maintenance. Dan Bemis Dresser Waukesha

Cetane Maintenance. Dan Bemis Dresser Waukesha Cetane Maintenance Dan Bemis Dresser Waukesha Cetane Maintenance General Hand wheel Maintenance Injection Nozzle Maintenance What is the Hand wheel Assembly Used For? Mechanism used for adjusting the compression

More information

A Comparison of Boat Introduction and Direct Injection using the Thermo Scientific ipro 5000 Series Combustion Analyzer

A Comparison of Boat Introduction and Direct Injection using the Thermo Scientific ipro 5000 Series Combustion Analyzer Application Note: 42165 A Comparison of Boat Introduction and Direct Injection using the Thermo Scientific ipro 5000 Series Combustion Analyzer Kristian J. Hoffman, Angela Seipel, Application Specialists,

More information

Influence of higher alcohols on the emissions of diesel engine operated with rape seed oil

Influence of higher alcohols on the emissions of diesel engine operated with rape seed oil Influence of higher alcohols on the emissions of diesel engine operated with rape seed oil Dr. Ákos Bereczky, Tamás Laza 1 Department of Energy Engineering, Faculty of Mechanical Engineering, Budapest

More information

is the crank angle between the initial spark and the time when about 10% of the charge is burned. θ θ

is the crank angle between the initial spark and the time when about 10% of the charge is burned. θ θ ME 410 Day 30 Phases of Combustion 1. Ignition 2. Early flame development θd θ 3. Flame propagation b 4. Flame termination The flame development angle θd is the crank angle between the initial spark and

More information

Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels

Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels ICE Workshop, STAR Global Conference 2012 March 19-21 2012, Amsterdam Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels Michael Heiss, Thomas Lauer Content Introduction

More information

Module7:Advanced Combustion Systems and Alternative Powerplants Lecture 32:Stratified Charge Engines

Module7:Advanced Combustion Systems and Alternative Powerplants Lecture 32:Stratified Charge Engines ADVANCED COMBUSTION SYSTEMS AND ALTERNATIVE POWERPLANTS The Lecture Contains: DIRECT INJECTION STRATIFIED CHARGE (DISC) ENGINES Historical Overview Potential Advantages of DISC Engines DISC Engine Combustion

More information

ENGINE. MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)

ENGINE. MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) Page 1 of 5 SPECIFICATIONS ENGINE Description Type Part Number Cooling System 9 10 (4.7L and 5.7L 14.5 13.7 (6.1L Engine) 14.8 14 Engine) 14 13.2 Engine Oil with Filter 5-5 4.7 (4.7L Engine) 5-6 5.7 5-7

More information

Determination of Free and Total Glycerin in B100 Biodiesel

Determination of Free and Total Glycerin in B100 Biodiesel Page 1 of 5 Page 1 of 5 Return to Web Version Determination of Free and Total Glycerin in B100 Biodiesel By: Michael D. Buchanan, Katherine K. Stenerson, and Vicki Yearick, Reporter US Vol 27.1 techservice@sial.com

More information

GASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No:

GASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No: GASOLINE DIRECT INJECTION IN SI ENGINES SUBMIT TED BY B. PAVAN VISWANADH P. ASHOK KUMAR Y06ME011, III/IV B. Tech Y06ME003, III/IV B. Tech Pavan.visu@gmail.com ashok.me003@gmail.com Mobile No :9291323516

More information

The performance of diesel engine using diesel oil and dme mixture fuels

The performance of diesel engine using diesel oil and dme mixture fuels International Research Journal on Engineering Vol. 2(2), pp. 019-027, February, 2014 Available online at http://www.apexjournal.org 2014 Apex Journal International Full Length Research The performance

More information

Vapor Pressure Measurement Of Gasoline, Crude Oil & LPG With New ASTM D5191 & D5188 Speed Test

Vapor Pressure Measurement Of Gasoline, Crude Oil & LPG With New ASTM D5191 & D5188 Speed Test Vapor Pressure Measurement Of Gasoline, Crude Oil & LPG With New ASTM D5191 & D5188 Speed Test Philipp Jordan eralytics TM GmbH www.eralytics.com Welcome to a new era of petroleum testing PERFORMANCE YOU

More information

Oxygen sensor control,

Oxygen sensor control, Page 1 of 37 24-71 Oxygen sensor control, checking Oxygen sensor and oxygen sensor control before catalytic converter, checking Special tools and equipment - or VAG1526A VAG1594A VAG1598/31 VAS5051 with

More information

HALDERMAN

HALDERMAN HALDERMAN WWW.JAMESHALDERMAN.COM 1. Diesel fuel ignition in a warm engine is being discussed. Technician A says diesel fuel is ignited by the heat of the compression. Technician B says diesel fuel is ignited

More information

How does Common Rail Injection work?

How does Common Rail Injection work? How does Common Rail Injection work? Words: Dr. Johannes Kech Pictures: MTU Tags/Keywords With common rail fuel injection, the combustion process can be optimized to achieve low pollutant levels combined

More information

POLLUTION CONTROL AND INCREASING EFFICIENCY OF DIESEL ENGINE USING BIODIESEL

POLLUTION CONTROL AND INCREASING EFFICIENCY OF DIESEL ENGINE USING BIODIESEL POLLUTION CONTROL AND INCREASING EFFICIENCY OF DIESEL ENGINE USING BIODIESEL Deepu T 1, Pradeesh A.R. 2, Vishnu Viswanath K 3 1, 2, Asst. Professors, Dept. of Mechanical Engineering, Ammini College of

More information

AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL

AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL CONSUMPTION MEASUREMENT AVL FUEL BALANCE & FUEL TEMPERATURE CONTROL Description The combination of AVL Fuel Balance and AVL Fuel Temperature Control is a high precise fuel consumption measurement and conditioning

More information

Powerguard High Performance Diesel Additive Package

Powerguard High Performance Diesel Additive Package Technical Dossier Customer Technical Service Powerguard 6520 High Performance Diesel Additive Package Innospec Limited Performance Test Facility Station Lane Millbrook Bedford MK45 2JQ, UK Tel: +44(0)1525

More information

Oxygen sensor control,

Oxygen sensor control, Page 1 of 46 24-71 Oxygen sensor control, checking Oxygen sensor and oxygen sensor control before catalytic converter, checking Special Tools and Equipment VAG1526A VAG1594A VAG1598/31 VAS5051 with VAG5051/1

More information

PERM injection system Development. PERM injection system Validation

PERM injection system Development. PERM injection system Validation PERM injection system Development AVIO, Antonio Peschiulli KIT, Nikos Zarzalis PERM injection system Validation ENGINSOFT, Lorenzo Bucchieri ONERA, Isabel Da Costa DGA, Vincent Plana Index 1. Introduction

More information

TABLE 1: COMPARISON OF GREASE AND OIL LUBRICATION. housing structure and sealing method. speed. cooling effect. removal of foreign matter

TABLE 1: COMPARISON OF GREASE AND OIL LUBRICATION. housing structure and sealing method. speed. cooling effect. removal of foreign matter TECHNICAL INSIGHT PRODUCT AND APPLICATION ENGINEERING INFORMATION A PUBLICATION OF NSK AMERICAS LUBRICATION - OPTIMIZING BEARING LIFE Lubrication is a critical component to extending bearing life. Without

More information

EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power

EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power GT-SUITE USERS CONFERENCE FRANKFURT, OCTOBER 4 TH 2004 EGR Transient Simulation of a Turbocharged Diesel Engine using GT-Power TEAM OF WORK: G. GIAFFREDA, C. VENEZIA RESEARCH CENTRE ENGINE ENGINEERING

More information

Automotive Fuel and Emissions Control Systems 4/E

Automotive Fuel and Emissions Control Systems 4/E Automotive Fuel and Emissions Control Systems 4/E Opening Your Class KEY ELEMENT Introduce Content Motivate Learners State the learning objectives for the chapter or course you are about to cover and explain

More information

CENTRIFUGAL CHILLER. Lubrication System Pull oil sample for spectroscopic analysis.

CENTRIFUGAL CHILLER. Lubrication System Pull oil sample for spectroscopic analysis. CENTRIFUGAL CHILLER Annual Inspection Refrigerant Circuit Check and record refrigerant level Inspect for leak results Calculate refrigerant lass and report to the customer. Repair minor leaks as required

More information

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE

INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE 1. UNIVERSITY OF RUSE, 8, STUDENTSKA STR., 7017 RUSE, BULGARIA 1. Simeon ILIEV ABSTRACT: The objective of this paper is to

More information

APPLICATION BRIEF. Model 4730/4731 NTO New Technology Oven. June 2000

APPLICATION BRIEF. Model 4730/4731 NTO New Technology Oven. June 2000 APPLICATION BRIEF Model 4730/4731 NTO New Technology Oven June 2000 Introduction The quality of asphalt concrete pavement is typically characterized by two very important factors the asphalt binder content

More information

ProTecta Synthetic Fuel System Treatment

ProTecta Synthetic Fuel System Treatment ProTecta Synthetic Fuel System Treatment No fuel system treatment does more for your car than ProTecta. That's because ProTecta complete Fuel System Treatment is the only double-acting super concentrate

More information

Solar Energy International Biodiesel Workshop. Introduction to the Diesel Engine

Solar Energy International Biodiesel Workshop. Introduction to the Diesel Engine Solar Energy International Biodiesel Workshop Introduction to the Diesel Engine Aftercooling / Intercooling Turbocharging Cetane Number Cloud Point (CP) Flash Point Cold Filter Plugging Point (CFPP) Pour

More information

Detailed Mid-FTIR Analysis Of Gasoline, Diesel & Jet Fuel With A Single Portable Analyzer In Seconds

Detailed Mid-FTIR Analysis Of Gasoline, Diesel & Jet Fuel With A Single Portable Analyzer In Seconds Detailed Mid-FTIR Analysis Of Gasoline, Diesel & Jet Fuel With A Single Portable Analyzer In Seconds Philipp Jordan eralytics TM GmbH www.eralytics.com Welcome to a new era of petroleum testing PERFORMANCE

More information

PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL

PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily

More information

Flash Point Process Analyzer

Flash Point Process Analyzer Norms and standards ASTM D 56 ASTM D 93; DIN EN ISO 2719; IP 34 DIN EN ISO 13736; IP170 DIN 51755 Application The BARTEC BENKE Flash Point Process Analyzer (FPA-4) is a continuously measuring analyzer,

More information

Introduction. Keywords: Nozzle diameter, premix injector, Eulerian multiphase flow, burner. a b

Introduction. Keywords: Nozzle diameter, premix injector, Eulerian multiphase flow, burner. a b Effects of Nozzle Diameter on the Spray Characteristics of Premix Injector in Burner System SHAHRIN Hisham Amirnordin a, SALWANI Ismail, RONNY Yii Shi Chin, NORANI Mansor, MAS Fawzi, AMIR Khalid b Combustion

More information

Study of a hybrid cooling system using GT-Suite

Study of a hybrid cooling system using GT-Suite PAYET-BURIN Thomas (Alten) Direction de la Qualité et de l Ingénierie Agenda Introduction Hydraulic studies Overview of the architecture of a hybrid cooling system Hydraulic correlation Architecture choices

More information

BG Diesel Fuel Products THE PROOF

BG Diesel Fuel Products THE PROOF BG Diesel Fuel Products THE PROOF Field Test Metropolitan Atlanta Rapid Transit Authority BG DFC with Lubricity, Part No. 227, stopped accelerated corrosion that was occurring in underground fuel storage

More information

Development of new combustion strategy for internal combustion engine fueled by pure ammonia

Development of new combustion strategy for internal combustion engine fueled by pure ammonia Development of new combustion strategy for internal combustion engine fueled by pure ammonia Dongeun Lee, Hyungeun Min, Hyunho park, Han Ho Song Seoul National University Department of Mechanical Engineering

More information

Diesel HCCI Results at Caterpillar

Diesel HCCI Results at Caterpillar Diesel HCCI Results at Caterpillar Kevin Duffy, Jonathan Kilkenny Andrew Kieser, Eric Fluga DOE Contracts DE-FC5-OR2286, DE-FC5-97OR2265 Contract Monitors Roland Gravel, John Fairbanks DEER Conference

More information

TRITON BTM. Bearing Temperature Monitoring. High measuring accuracy. Engine protection. Very low false alarm probability.

TRITON BTM. Bearing Temperature Monitoring. High measuring accuracy. Engine protection. Very low false alarm probability. Bearing Temperature Monitoring BTM Control Unit Control Unit Oil Tray Temperature Sensors Engine protection Easy to install Simple principle Fast reaction time High measuring accuracy Very low false alarm

More information

Sulfur in Oil Analyzer

Sulfur in Oil Analyzer Sulfur in Oil Analyzer The Rigaku NEX QC sulfur in oil analyzer for fuel and lubricating oils MARINE www.insatechmarine.com Insatech MARINE Sulfur in Oil Analyzer Sulfur in Oil Analyzer The ASTM D4294

More information

Natural gas engine E 0836 LE 202 Technical data

Natural gas engine E 0836 LE 202 Technical data Page 1 Principle: No of cylinders : Supercharging: Mixture cooling: Engine cooling : Lubrication : Spark plugs: Starter motor: 4-stroke Otto gas engine 6 in line Exhaust turbocharger with water-cooled

More information

6.4L Diesel Water In Fuel GSB

6.4L Diesel Water In Fuel GSB General Service Bulletin (GSB): This GSB targets the diagnosis, inspection and repair of the 6.4L diesel fuel system. Some 6.4L diesel vehicles may experience drivability concerns due to fuel system failures.

More information

Service Bulletin Winter Storage. All Carbureted Engines. 1. Stabilize Fuel. 2. Change Engine Oil and Filter 3.

Service Bulletin Winter Storage. All Carbureted Engines. 1. Stabilize Fuel. 2. Change Engine Oil and Filter 3. Service Bulletin Volvo Penta of the Americas 1300 Volvo Penta Drive Chesapeake, Virginia 23320-9810 Distribution: M Date: 12-1996 Binder: C Group Number Version 17-3 5 02 Winter Storage All Gasoline Engines

More information

Performance and Emission Analysis of Diesel Engine using palm seed oil and diesel blend

Performance and Emission Analysis of Diesel Engine using palm seed oil and diesel blend IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. VIII (Mar- Apr. 2014), PP 29-33 Performance and Emission Analysis of Diesel Engine

More information

Detection of Sulfur Compounds in Natural Gas According to ASTM D5504 with an Agilent Dual Plasma Sulfur Chemiluminescence Detector

Detection of Sulfur Compounds in Natural Gas According to ASTM D5504 with an Agilent Dual Plasma Sulfur Chemiluminescence Detector Detection of Sulfur Compounds in Natural Gas According to ASTM D554 with an Agilent Dual Plasma Sulfur Chemiluminescence Detector Application Note Author Rebecca Veeneman Abstract Sulfur compounds in natural

More information

THE INFLUENCE OF HYDROCARBON FUELS AND BIOFUELS ON SELF-IGNITION DELAY PERIOD. Andrzej Ambrozik, Tomasz Ambrozik, Piotr Łagowski

THE INFLUENCE OF HYDROCARBON FUELS AND BIOFUELS ON SELF-IGNITION DELAY PERIOD. Andrzej Ambrozik, Tomasz Ambrozik, Piotr Łagowski TEKA Kom. Mot. Energ. Roln. OL PAN, 2007, 7, 15 23 THE INFLUENCE OF HYDROCARBON FUELS AND BIOFUELS ON SELF-IGNITION DELAY PERIOD Faculty of Mechatronics and Machine Building, Kielce University of Technology

More information

Marc ZELLAT, Driss ABOURI and Stefano DURANTI CD-adapco

Marc ZELLAT, Driss ABOURI and Stefano DURANTI CD-adapco 17 th International Multidimensional Engine User s Meeting at the SAE Congress 2007,April,15,2007 Detroit, MI RECENT ADVANCES IN DIESEL COMBUSTION MODELING: THE ECFM- CLEH COMBUSTION MODEL: A NEW CAPABILITY

More information

1,9 ltr-tdi-industrial Engine

1,9 ltr-tdi-industrial Engine 1,9 ltr-tdi-industrial Engine Technical Status: 4/1999 Contents Combustion process................3 Injectors.........................4 Needle Lift Sender.................5 Air-mass Flow Meter...............6

More information

ALCOHOL LOX STEAM GENERATOR TEST EXPERIENCE

ALCOHOL LOX STEAM GENERATOR TEST EXPERIENCE ALCOHOL LOX STEAM GENERATOR TEST EXPERIENCE Klaus Schäfer, Michael Dommers DLR, German Aerospace Center, Institute of Space Propulsion D 74239 Hardthausen / Lampoldshausen, Germany Klaus.Schaefer@dlr.de

More information

ENVIRONMENT. The Diesel Engine and the Environment

ENVIRONMENT. The Diesel Engine and the Environment ENVIRONMENT The Diesel Engine and the Environment David Steffens Wartsila North America, Inc. Session Chair Wayne Cole, Cole Engineering September 16-17, 2003 Houston, Texas Introduction The diesel engine

More information

WEG Cooler. Table of Contents. Introduction and General Description. 3. Operational Specifications.. 4. Dimensional Specifications.

WEG Cooler. Table of Contents. Introduction and General Description. 3. Operational Specifications.. 4. Dimensional Specifications. WEG Cooler Owner s Manual Table of Contents Introduction and General Description. 3 Operational Specifications.. 4 Dimensional Specifications. 5 Component and Connector ID s and Descriptions.. 6-8 Installation

More information

The Internal combustion engine (Otto Cycle)

The Internal combustion engine (Otto Cycle) The Internal combustion engine (Otto Cycle) The Otto cycle is a set of processes used by spark ignition internal combustion engines (2-stroke or 4-stroke cycles). These engines a) ingest a mixture of fuel

More information

For Applications Demanding Precision and Efficiency, FloMax Nozzles Outperform All Others

For Applications Demanding Precision and Efficiency, FloMax Nozzles Outperform All Others Nozzles Control Analysis Fabrication FloMax Air Atomizing Nozzles Unique Atomization Process Provides Unmatched Efficiency in Gas Conditioning Operations For Applications Demanding Precision and Efficiency,

More information

Kazuhiro Yuki Niigata Power Systems Co., Ltd.

Kazuhiro Yuki Niigata Power Systems Co., Ltd. Advanced Development of Medium Speed Gas Engine Targeting to Marine Kazuhiro Yuki Niigata Power Systems Co., Ltd. Background Nowadays, regulation of exhaust emission from engines is becoming more strict

More information

ENGINE AND EMISSION CONTROL

ENGINE AND EMISSION CONTROL 17-1 ENGINE AND EMISSION CONTROL CONTENTS ENGINE CONTROL SYSTEM........ 3 SERVICE SPECIFICATION............... 3 ON-VEHICLE SERVICE.................. 3 Accelerator Cable Check and Adjustment... 3 ACCELERATOR

More information

SCR-Solutions for BS IV and BS V Regulations

SCR-Solutions for BS IV and BS V Regulations SCR-Solutions for BS IV and BS V Regulations Lakshminarayanan Govindaraj Commercial Vehicle Megatrends India 2012 25-27 April 2012, Chennai, India Albonair 2007 2008 2009 2010 2012»Albonair is founded

More information

Catalytic Converter Testing

Catalytic Converter Testing Catalytic Converter Testing The first catalytic converter was created before the use of onboard computer systems its job was to oxidize HC and CO into CO2 and H2O. The term oxidizes means to add O2 to

More information

Agilent 7693A Automated Liquid Sampler

Agilent 7693A Automated Liquid Sampler IET International Equipment Trading Ltd. www.ietltd.com Proudly serving laboratories worldwide since 1979 CALL +847.913.0777 for Refurbished & Certified Lab Equipment Agilent 7693A Automated Liquid Sampler

More information

DOC design & sizing using GT-SUITE European GT Conference Gauthier QUENEY 09/10/2017

DOC design & sizing using GT-SUITE European GT Conference Gauthier QUENEY 09/10/2017 DOC design & sizing using GT-SUITE European GT Conference 2017 Gauthier QUENEY 09/10/2017 Background Simulation tool target Predict exhaust outlet emissions Thermal modeling Chemical modeling This presentation

More information

2. Air Line AIR LINE FUEL INJECTION (FUEL SYSTEM) A: GENERAL B: MANIFOLD ABSOLUTE PRESSURE SENSOR FU(H4DOTC)-3

2. Air Line AIR LINE FUEL INJECTION (FUEL SYSTEM) A: GENERAL B: MANIFOLD ABSOLUTE PRESSURE SENSOR FU(H4DOTC)-3 W1860BE.book Page 3 Tuesday, January 28, 2003 11:01 PM 2. Air Line A: GENERAL The air filtered by the air cleaner enters the throttle body where it is regulated in the volume by the throttle valve and

More information

OPTICAL ANALYSIS OF A GDI SPRAY WALL-IMPINGEMENT FOR S.I. ENGINES. Istituto Motori CNR, Napoli Italy

OPTICAL ANALYSIS OF A GDI SPRAY WALL-IMPINGEMENT FOR S.I. ENGINES. Istituto Motori CNR, Napoli Italy OPTICAL ANALYSIS OF A GDI SPRAY WALL-IMPINGEMENT FOR S.I. ENGINES A. Montanaro, L. Allocca, S. Alfuso Istituto Motori CNR, Napoli Italy XV National Meeting, Milano 29-30 Novembre 2007 GENERAL CONSIDERATIONS

More information

The influence of thermal regime on gasoline direct injection engine performance and emissions

The influence of thermal regime on gasoline direct injection engine performance and emissions IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS The influence of thermal regime on gasoline direct injection engine performance and emissions To cite this article: C I Leahu

More information

Effect of Reformer Gas on HCCI Combustion- Part II: Low Octane Fuels

Effect of Reformer Gas on HCCI Combustion- Part II: Low Octane Fuels Effect of Reformer Gas on HCCI Combustion- Part II: Low Octane Fuels Vahid Hosseini, and M David Checkel Mechanical Engineering University of Alberta, Edmonton, Canada project supported by Auto21 National

More information

2012 Chevy Truck Equinox FWD L4-2.4L Vehicle > Locations > Components

2012 Chevy Truck Equinox FWD L4-2.4L Vehicle > Locations > Components 2012 Chevy Truck Equinox FWD L4-2.4L Vehicle > Locations > Components 2012 Chevy Truck Equinox FWD L4-2.4L Vehicle > Powertrain Management > Fuel Delivery and Air Induction > Description and Operation

More information

Phase Technology PPA-70Xi Pour Point Analyzer

Phase Technology PPA-70Xi Pour Point Analyzer Phase Technology PPA-70Xi Pour Point Analyzer About Phase Technology Expertise: Design & manufacture of analyzers to test cloud, pour and freeze point Cold Flow is All We Do! Scientific Background: 29

More information

THE EFFECT OF INNER CATALYST APPLICATION ON DIESEL ENGINE PERFORMANCE

THE EFFECT OF INNER CATALYST APPLICATION ON DIESEL ENGINE PERFORMANCE THE EFFECT OF INNER CATALYST APPLICATION ON DIESEL ENGINE PERFORMANCE Anna Janicka, Zbigniew J. Sroka, Wojciech Walkowiak Wrocław University of Technology wyb. Wyspiańskiego 27 50-370 Wroclaw tel./fax.

More information

Doing more for clean environment and energy saving

Doing more for clean environment and energy saving Doing more for clean environment and energy saving Rütli Burners Switzerland AG is a worldwide leading industrial burner solution supplier. Our head quarter is located in Schaffhausen, Switzerland one

More information

NUMBER: S.M. REF.: Refer to 2.5 ENGINE: 60 DATE: January 2007

NUMBER: S.M. REF.: Refer to 2.5 ENGINE: 60 DATE: January 2007 NUMBER: 1 60 07 S.M. REF.: Refer to 2.5 ENGINE: 60 DATE: January 2007 SUBJECT: N3 ELECTRONIC INJECTOR PUBLICATION: 6SE483 The Series 60 Service Manual has been revised. Engine models built from December

More information

Presented by. Navistar Education 2015

Presented by. Navistar Education 2015 Presented by Navistar Education 2015 1.2 Overview This course is intended to provide parts specialists with a description of Diesel Exhaust Fluid, or DEF, part number configuration, ordering and distribution

More information

The Feasibility of Fill-for-Life Turbine Oils. Greg Livingstone Fluitec

The Feasibility of Fill-for-Life Turbine Oils. Greg Livingstone Fluitec The Feasibility of Fill-for-Life Turbine Oils Greg Livingstone Fluitec Outline How long is Fill-for-Life anyway? Bleed & Feed Strategy Why do Turbine Oils Fail? Replenishing Antioxidants: 1. Feasibility

More information

Heat Engines Lab 12 SAFETY

Heat Engines Lab 12 SAFETY HB 1-05-09 Heat Engines 1 Lab 12 1 i Heat Engines Lab 12 Equipment SWS, 600 ml pyrex beaker with handle for ice water, 350 ml pyrex beaker with handle for boiling water, 11x14x3 in tray, pressure sensor,

More information

Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) 1

Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) 1 This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically

More information

Potentials for Efficiency Improvement of Gas Engines

Potentials for Efficiency Improvement of Gas Engines Potentials for Efficiency Improvement of Gas Engines Dr. Shinsuke Murakami Development Engineer Commercial and Large Engines Engineering and Technology Powertrain Systems 1 Content Fuel Efficiency Are

More information

DME Standardization, Regulation and Safety Recommendations

DME Standardization, Regulation and Safety Recommendations IDA Patron Members DME Standardization, Regulation and Safety Recommendations François Bollon International DME Association 7 th Asian DME Conference Niigata 1 Presentation Topics of this presentation

More information

Valvoline Premium Blue Plus

Valvoline Premium Blue Plus What is? Valvoline is a benchmark in diesel engine oil technology, specially produced to lubricate the modern diesel engines meeting latest emission norms operating under a wide variety of service conditions.

More information

ME 74 AUTOMOTIVE POLLUTION AND CONTROL Automobile Engineering-vii sem Question Bank( )

ME 74 AUTOMOTIVE POLLUTION AND CONTROL Automobile Engineering-vii sem Question Bank( ) ME 74 AUTOMOTIVE POLLUTION AND CONTROL Automobile Engineering-vii sem Question Bank(2013-2014) UNIT I INTRODUCTION 1. How the transient operation of S.I engine will cause CO formation? (may /June 2007)

More information

X8 MIG Welder THE FUTURE OF WELDING IS HERE

X8 MIG Welder THE FUTURE OF WELDING IS HERE X8 MIG Welder THE FUTURE OF WELDING IS HERE "The X8 MIG Welder is a first-class equipment for demanding, high-quality aluminum welding from the point of view of both arc performance and usability." Kimmo

More information

The New Engine for Accord Hybrid and Study of the Turbocharging Direct Injection Gasoline Engine of Small Diameter of Cylinder

The New Engine for Accord Hybrid and Study of the Turbocharging Direct Injection Gasoline Engine of Small Diameter of Cylinder 22nd Aachen Colloquium Automobile and Engine Technology 2013 1 The New Engine for Accord Hybrid and Study of the Turbocharging Direct Injection Gasoline Engine of Small Diameter of Cylinder Akiyuki Yonekawa

More information

A Study of INTERCEPTOR Synthetic 2-Stroke Oil for Ski-Doo Rotax E-TEC Engines

A Study of INTERCEPTOR Synthetic 2-Stroke Oil for Ski-Doo Rotax E-TEC Engines TECHNICAL STUDY A Study of INTERCER for Ski-Doo Rotax E-TEC Engines With ASTM Lubricity and Detergency Testing Published August 2012 Page 2 Editor s Note When Bombardier Recreational Products (BRP ) claimed

More information

Focus On Training Section: Unit 4

Focus On Training Section: Unit 4 All Pump Types Page 1 1. Title Page Be able to describe unit learning objectives: 2. Fuel System Be able to briefly note the components of a typical fuel injection system 3. Nozzle Location Know the difference

More information

Right Angle Nozzle Assembly

Right Angle Nozzle Assembly Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern

More information

Anti-Freeze Anti-Boil

Anti-Freeze Anti-Boil Anti-Freeze Anti-Boil Product Description Castrol Anti-Freeze Anti-Boil is an ALL YEAR ROUND automotive cooling system treatment, designed to provide complete cooling system protection in a concentration

More information

2013 Aftertreatment System with SCR Overview for Technicians Study Guide

2013 Aftertreatment System with SCR Overview for Technicians Study Guide TMT121340 Class Course Code: 8359 2013 Aftertreatment System with SCR Overview for Technicians Study Guide 2013 Aftertreatment System with SCR Study Guide 2013 Navistar, Inc. All rights reserved. All marks

More information

An Investigation into a new method to repair motor cores and improve Efficiency

An Investigation into a new method to repair motor cores and improve Efficiency An Investigation into a new method to repair motor cores and improve Efficiency Henk de Swart Marthinusen & Coutts Dennis Willemse, Gerhard Bergh, Thava Perumal Sasol Introduction A South African based

More information

LNR ENGINE CHAPTER - 5

LNR ENGINE CHAPTER - 5 LHR ENGINE CHAPTER - 5 LNR ENGINE 5.0 INTRODUCTION The studies on the performance of the conventional engine are shown in Chapter - 4. The research is extended to conduct experiments so as to improve the

More information

Wet flame-jet drilling: An alternative technique to access deep heat reservoirs

Wet flame-jet drilling: An alternative technique to access deep heat reservoirs Wet flame-jet drilling: An alternative technique to access deep heat reservoirs ETH Zürich, Institute of Process Engineering, Switzerland Philipp Rudolf von Rohr philippr@ethz.ch Philipp Rudolf von Rohr

More information

Powerguard 6061 High Performance Diesel Additive Package

Powerguard 6061 High Performance Diesel Additive Package Technical Dossier Customer Technical Service Powerguard 6061 High Performance Diesel Additive Package FTM 196 March 2015 Innospec Limited Performance Test Facility Station Lane Millbrook Bedford MK45 2JQ,

More information

The Influence of Port Fuel Injection on Combustion Stability

The Influence of Port Fuel Injection on Combustion Stability 28..9 Technical The Influence of Port Fuel Injection on Combustion Stability Shoichi Kato, Takanori Hayashida, Minoru Iida Abstract The demands on internal combustion engines for low emissions and fuel

More information

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012

CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012 :~ ~~~~~============~----------------------~ Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035014 Certified

More information

Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends

Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends Effects of Temperature and Droplet Size on the Ignition Delay of Diesel and Bio-Diesel Blends *M. Arsalan Khan 1, 2, Majid Baseer 1, and Dr. Abdul Shakoor 2 1 Sarhad University of Science and Information

More information

REFRIGERANT FLAMMABILITY TESTING IN LARGE VOLUME VESSELS

REFRIGERANT FLAMMABILITY TESTING IN LARGE VOLUME VESSELS B U F F A L O R E S E A R C H L A B O R A T O R I E S 2 0 P E A B O D Y S T R E E T B U F F A L O N E W Y O R K 1 4 2 1 0 REFRIGERANT FLAMMABILITY TESTING IN LARGE VOLUME VESSELS FLAMMABILITY CRITERION

More information

Wärtsilä NO X Reducer. Environmental Efficiency

Wärtsilä NO X Reducer. Environmental Efficiency Wärtsilä NO X Reducer Environmental Efficiency Environmental efficiency Stringent legislations concerning NO X. Retroactive legislations are introduced. Regulations in the shape of fees, taxes or incentive

More information

The 3.0l V6 TDI engine

The 3.0l V6 TDI engine Service Training Self-study programme 350 The 3.0l V6 TDI engine Design and function The range of engines fitted in the Phaeton and Touareg is being extended by a hightech turbodiesel engine. The 3.0l

More information

STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD

STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD STUDY OF NOZZLE INJECTOR PERFORMANCE USING CFD Vimal Kumar Pathak 1 and Sumit Gupta 2 1,2 Department of Mechanical Engineering, MNIT, Jaipur ABSTRACT The aim of this paper is to study the performance of

More information

Totally Automated Method for the Determination of Sudan Dyes in Food via On-Line Filtration, SPE and HPLC Analysis

Totally Automated Method for the Determination of Sudan Dyes in Food via On-Line Filtration, SPE and HPLC Analysis Totally Automated Method for the Determination of Sudan Dyes in Food via On-Line Filtration, SPE and HPLC Analysis Joan M Stevens, Ph.D., Mark Crawford and Greg Robinson Single Presenter Name Abstract:

More information

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment SCI-PUBLICATIONS Author Manuscript American Journal of Applied Sciences 5 (3): 197-2, 08 ISSN 1546-9239 08 Science Publications Fuel Injection Pressure Effect on Performance of Direct Injection Diesel

More information

BS5582 VACUUM PUMP AND BRAKE BLEEDER KIT Instructions

BS5582 VACUUM PUMP AND BRAKE BLEEDER KIT Instructions RELEVANT PRODUCTS OF BRAKE SYSTEM SERVICE Motorcycle Service Tools BS5630 Brake Fluid Tester BS0245 BS5800 Brake Fluid Condition Tester Detaching Tool Motorcycle Service Tools BS9870 30mm Disc Brake Spreader

More information