Orion Lubricants Tanzania

Transcription

1 Orion Lubricants Tanzania Our Oils and Lubricants Motor Lubricants (Petrol) Your Automobile Deserves Protection Today's Havoline engine oils lives up to its heritage, helps improve performance and can help maximize fuel economy. That s why automobile enthusiasts everywhere reach for Havoline Products when they want to protect their car s engine and its performance. Since 1904, Havoline engine oils have provided outstanding performance. In 1946, Havoline introduced its New and improved Havoline Motor Oil, which for the first time featured gas additives that inhibited corrosion, provided detergent and dispersive action, reduced piston ring wear at both low and high temperatures, and protected against engine rust. These innovations have continued, year after year, and have proven time and again that Havoline products offer unbeaten performance. Today s Havoline lives up to its heritage with its latest technology: Havoline with Deposit Shield, an advanced formulation that protects your engine from harmful deposits, helps improve performance, and maximizes fuel economy. Havoline with Deposit Shield comes in different products to give maximum protection for your engine: Havoline Ultra S Fully Synthetic SAE 5w-40 Havoline Ultra S Fully Synthetic SAE 5w-40 is a premium performance, multi-grade oil formulated from selected synthetic base fluids and matching additive technology for use in passenger car and light truck gasoline and diesel engines under all operating conditions. Benefits power output and fuel economy Ensures smooth engine staring, especially in cold weather Protects turbocharged Maintains power output and fuel economy engines in high-temperature operation Increases engine durability

2 Reduces maintenance costs Havoline Formula SAE 15w-40 You demand top performance from your vehicle. You also demand superior protection for your valuable investment. Havoline Formula SAE 15w-40 multi-grade motor oil with Deposit Shield offers vital protection against friction, wear and deposits so your engine gets the ultimate in both performance and protection. Benefits power output and fuel economy Ensures smooth engine staring, especially in cold weather Protects turbocharged Maintains power output and fuel economy engines in high-temperature operation Increases engine durability Reduces maintenance costs Havoline High Mileage SAE 20w-50 Your vehicle has been around the block more than a few times and needs more protection against deposits and wear than a new car does. Havoline High Mileage SAE 20W-50 multi-grade motor oil with Deposit Shield is designed for higher mileage vehicles to slow down ageing and help reduce oil consumption. Benefits Maintains power output Reduces maintenance costs Prolongs engine life Maintains engine seals to minimize oil leaks Reduces oil consumption by decreasing loss through evaporation

3 Havoline High Mileage Oil SAE 40 Your engine s performance decreases with time and distance. Oil seals start to leak and gaskets deteriorate. It needs more protection than a new car does. Havoline High Mileage SAE 40 mono-grade motor oil with Deposit Shield is specially formulated for older, higher mileage vehicles, to slow down ageing and help reduce noise and oil consumption. Benefits Maintains power output Reduces maintenance costs Prolongs engine life Helps to reduce noise Minimises oil leaks and reduces oil consumption Motor Lubricants (Diesel) Delo Delivers Confidence TM Delo has grown to become a powerful global brand with a proven track record of exceeding the requirements of some of the largest, most demanding fleets in the world. When Standard Oil launched Delo (short for Diesel Engine Lubricating Oil) in 1935, Delo products have been at the forefront of lubrication innovation. Today, we continue to put our expertise to work for you, delivering a premium suite of proven products, combined with in-depth industry knowledge and a strong support network, to help ensure your business success. After all, protecting your equipment means protecting your bottom line. Delo s product line formulated with ISOSYN Technology combines highly refined base oils with advanced additives to create products that rival synthetic lubricants in critical performance tests. Delo with ISOSYN Technology provides extended service protection, maximizes engine durability, and minimizes operating costs. Properly lubricating the inside of a heavy-duty engine requires more than just creating a protective film. Quality heavy-duty engine oils must also disperse soot and control sludge in order to help maximize your mileage and guard against loss of your engine's life. Delo engine oils do all that and more. Delo s product range includes:

4 Delo 400LE Multigrade SAE 15W-40 (API CJ-4 & ACEA E9) Low SAPS formulation specifically designed for the latest low emission engines fitted with diesel particulate filters, but also those fitted with EGR and/or SCR systems. Provides excellent wear protection and helps prolong engine life. Maintains soot discrepancy helps prevent filter plugging. Limits deposit for formulation and protects critical engine parts. Meets major OEM engine manufacturer specifications including Caterpillar, Volvo, Cummins and others. Formulated with ISOSYN Technology, that rivals synthetic performance to provide extended service protection, maximizes engine durability and minimizes operating costs. Delo 400 Multigrade SAE 15W-40 (API CI-4 PLUS) Universal formulation provides excellent overall performance in mixed fleets of different engine designs. Provides exceptional oxidation stability and soot control extending oil drain capability. Designed for electronically controlled diesel engines including those with EGR and/or SCR systems. Meets major OEM engine manufacturer specifications including Caterpillar ECF-2; Mack EO-N Premium Plus 03; JASO DH-1, EMA Global DHD-1 and others. Formulated with ISOSYN Technology to provide exceptional soot dispersancy, deposit control and wear protection. Delo Gold Ultra Multigrade SAE 15W-40 (API CI-4) Provides superb wear protection and helps maximize engine life. Maintains soot dispersancy and helps prevent sludge build-up. Maintains viscosity in tough diesel engine operating conditions. Meets major OEM engine manufacturer specifications including Volvo VDS-3, Cummins CES 20078; Daimler MB Approval 228.3; MAN and others. Formulated with ISOSYN Technology to provide high level of protection for critical engine parts. Maintains soot dispersancy that helps prevent engine deposits and keeps parts clean. Maximises engine durability.

5 Delo Silver Multigrade High performance, multigrade, heavy-duty diesel engine oil specially designed to lubricate diesel and gasoline engines requiring API CF-4, CF or SG performance lubricants. Delo Silver Monograde A quality, monograde, heavy duty diesel engine oil specially designed to lubricate diesel engines requiring API CF or SF performance lubricants, suitable for use with high sulphur fuels at appropriate oil drain intervals due to its level of alkaline reserve. Motorcycle Oil Havoline Power 2T SAE F/M2, JASO FC Havoline Power 2T is a low smoke, semi-synthetic two-stroke motorcycle oil formulated with a low ash additive system. Havoline Power 2T is pre-diluted with a high flash point, low odor solvent to facilitate mixing with gasoline at all temperatures. It is designed for engines requiring JASO FC performance lubricants.

6 Brake& Clutch Fluids Caltex Brake and Clutch Fluid DOT 4 Caltex Brake and Clutch Fluid DOT 4 is an advanced, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems, particularly in severe service conditions or where DOT 4 fluids are recommended. Transmission Fluid Easy Shift 75W90 (20x500mlP) Easy Shift is a high performance, highly shear stable, multi grade manual transmission fluid specifically designed for Asian passenger car manual transmissions and transaxles. Applications Japanese and Korean car and light commercial vehicle manual transmissions and transaxles. Not recommended for use in heavy duty truck and bus manual transmissions, or in spiral bevel or hypoid drive axles where API GL-4 or GL-5 type gear lubricants are specified. Performance Standards Suitable for use in the following makes of manual transmission and transaxles Hyundai Kia Mazda Mitsubishi Nissan Suzuki Toyota Meets API GL-4 (self-certified) ATF-HDM: Heavy Duty Transmission Fluid

7 Special purpose, red dyed heavy duty transmission fluid series designed for specific automatic and power shift transmissions and power steering system applications over a wide temperature range. Also for use in hydraulic systems and compressors which normally use fluids. Applications - Automotive heavy duty automatic transmissions - Power shift transmissions - Power steering units - Industrial high pressure hydraulic systems - Stationary air compressors - Remote control hydraulic systems Performance Standards - Mercedes Benz Sheet Mercedes Benz Sheet Allison C-4 (approval number C ) - ZF Sheet TE-ML 02F, 03D, 04D, 14A, 17C - Voith G607 Benefits - Longer equipment life - Extended fluid service life - Wide temperature capability - Reduced downtime Havoline ATF-J JASO 315, Type 1-A Havoline ATF-J is a high performance, multipurpose automatic transmission fluid (ATF) formulated in hydrocracked base oils which provide outstanding oxidation resistance. It is specially engineered for Japanese passenger car automatic transmissions which require fluid properties different to conventional ATF. Havoline ATF-J is suitable for use where the following fluid specifications are recommended: Toyota Type IV, Nissan Matic J, Mitsubishi Diamond SP-III, Honda ATF-Z1. Texamatic 1322S Voith Turbo X (G607 list); ZF: TE-ML 04D TE-ML 14A Texamatic 1322S is a proven performance automatic transmission fluid suitable for use in passenger car, light truck and bus automatic transmissions which require GM DEXRON-IIIG fluids. It is formulated with mineral base oils in combination with a range of balanced

8 additives to provide smooth shifts and lock-ups, durable fluid performance throughout service life, high and low temperature protection and outstanding wear protection. Greases Automotive Grease: Multifak EP 2 Multipurpose EP grease contains highly refined mineral base oils, lithium thickener, extreme pressure (EP) additives and rust and oxidation inhibitors. Suitable as a multipurpose automotive and industrial applications. Industrial Grease: Texclad 2 Texclad 2 is a heavy duty, adhesive, open gear grease manufactured from high viscosity mineral oil and a water stabilised calcium soap thickener. It is fortified with graphite and molybdenum disulfide. It has a smooth, buttery texture, is black in colour and is available in NLGI grade 2. Recommended For The lubrication of exposed gears on power shovels, drag lines, kilns, crushers, cement mixers and other similar equipment used in heavy construction, mining and quarrying. Ideal for dipper sticks on excavating shovels. Suitable for use on open gears on industrial equipment of all kinds provided the operating temperature does not exceed 80 C. (Texclad 2 may also be used, in special cases, at high temperatures where the carrier grease is thermally decomposed, leaving the solid mineral additives to afford lubrication). Steel girth tyres on kilns, exposed gears on drum barking equipment, steel mill slipper drives, fork lift truck vertical rails and wheel drive gears, rock drill stems, fifth wheels (semi-trailer support turntables) and ball mill gears. Particularly suitable for underwater applications such as shafts and bushes of clamshell buckets for dredging, jacking legs of off-shore drilling rigs and marine wire ropes

9 May be used on sugar mill plain bearings to cut leakage where fluid lubricants give water pollution problems Texclad 2 can generally be pumped and applied satisfactorily at temperatures down to or below 0 C. At any temperature at which it can be pumped, the product will spread to form a uniform protective coating on the gear teeth. Useable temperature range in continuous service is -10 to 80 C. May be used at much higher temperatures where the carrier grease is decompsed, leaving the solid additives to afford lubrication. Poduct Benefits Provides easy application over a wide temperature range due to its good pumpability. Extends the service life of heavy duty equipment working in exposed or wet environments.this is achieved through the frictional and wear prevention characteristics of the graphite and molybdenum disulfide components. Its tacky adhesive nature prevents loss of lubricant from dripping and reduces throw off from large diameter gears with high peripheral speeds. Has excellent resistance to water wash out. Protects against rust by forming a continuous film of lubricant which excludes water from gear tooth surfaces. Resists flaking from gears at low temperatures, thereby maintaining full protection against wear and scuffing. Ultra Duty Grease Ultra-Duty greases are a premium, heavy duty EP greases containing a high viscosity mineral oil, lithium thickener, special EP additive, rust and oxidation inhibitors and at tackiness agent. They exhibit stay-in-place properties which make them particularly suitable for automotive and industrial equipment operating in wet, muddy or dusty conditions. They are available in NLGI Grades 1 and 2 and dyed red for easy identification. RECOMMENDED FOR Heavy duty transport Chassis lubrication Construction equipment

10 Agricultural tractors Off highway construction Mining Logging and forestry Quarrying Pulp and paper machinery Material handling equipment Dredging equipment Offshore oil drilling Marine deck equipment General industrial greasing For wheel bearing lubrication of on highway vehicles, other products that are specifically designed for this application, such as Liplex, are generally preferred. In centralised lubrication systems where pumpability is a primary requirement, it may be necessary to use the NLGI 1 grade (depending on the design of the system). Useable temperature range in continuous service is: NLGI 1: -20 to 140 C NLGI 2: -10 to 140 C Maximum temperature for short term exposure is 155 C for NLGI 1 grade and 165 C for NLGI 2. CUSTOMER BENEFITS Reduces maintenance costs Outstanding film strength and effective EP additive protect against component wear under severe conditions and shock loading. Extreme tackiness maintains sealing collar of grease around bushings which prevents the ingress of abrasive dirt. Excellent resistance to water wash out ensures lubrication is maintained under extremely wet and muddy conditions. Extended service lubrication Superior adhesiveness ensures grease stays in place and resists leakage, even in the most severe and shock load conditions, making it possible to extend relubrication intervals. Protects against corrosion Highly effective rust and corrosion inhibitors protect metal surfaces, even under extremely wet conditions.

11 Gear Lubricants Thuban GL5 EP SAE 80W-90, 85W-140 Thuban GL5 EP is a high performance, multipurpose, thermally stable, EP automotive gear lubricant. Thuban GL5 EP is formulated with clean gear technology for applications where API GL-5 and/or API MT-1 performance is required. Industrial Lubricants Meropa: Industrial Gear Lubricant High performance mild EP industrial gear lubricant formulated with sulphur-phosphorus additive system which provides rust and oxidation inhibition, corrosion and oxidation inhibitor and a metal preserver. Designed primarily for industrial gear lubrication services where loads and shock loadings are high. Rando HD: Anti-Wear Hydraulic Fluid Premium quality anti wear hydraulic fluid designed for use in mobile and stationery high pressure hydraulic systems

12 Soluble Oil D (20LPPLEN Cutting Fluid Applications Texaco Soluble Oil D is recommended for all metals (except magnesium) where maximum cooling is desired particularly when cutting with carbon, high speed steel, or tungsten carbide tools. Texaco Soluble Oil D is used extensively in milling, drilling, gear cutting, turning, planing, shaping, sawing and grinding operations. Texaco Soluble Oil D is typically diluted in water/oil ratios ranging from 10:1 to 50:1. See the Texaco Soluble Oil Mixing Recommendations chart for the proper water/oil ratio for each application. Always add oil to water to avoid forming sticky invert emulsions that do not emulsify properly in water. Texaco Soluble Oil D provides excellent in-process corrosion protection. Use of this product as a metal protective fluid for short-term rust protection is not recommended. Do not recommend Texaco Soluble Oil D emulsions for operations involving magnesium. Hot magnesium is a fire hazard when it contacts water. Emulsions of soluble metalworking fluids and water may become contaminated with harmful Micro organisms such as bacteria and fungus, which can cause illness and infection. This can occur even in emulsions with fluids that initially contain some biocide because the biocide can be depleted during service. A metalworking fluid maintenance program should be followed in order to control this hazard. Such a program may require the use of biocides. Customer Benefits Texaco Soluble Oil D delivers value through: Minimal separation Excellent emulsion even with hard water Good rust protection for steel work and machined parts even when water/oil emulsion ratios are 80:1 Cooling improved by metal wetting. Also good chip settling Reduced foaming Possibility of sump overflow minimized Good stability in storage Reduced tendency to turn rancid Good ability to control bacterial growth and rancid odors Features Texaco Soluble Oil D is used broadly in machine shops as a multifunctional cutting fluid. It is primarily designed to cool and lubricate the contact point of the tool and the work piece. Texaco Soluble Oil D: helps prevent rusting or corrosion of the machined metals helps control the growth of bacteria which is a constant problem in soluble oil circulating systems due to outside contamination minimizes surface foam speeds the release of entrained air which could cause pump cavitation

13 This is an extremely versatile fluid designed to meet many of the situations encountered in the metalworking industry. Texaco Soluble Oil D is an emulsifying oil that readily mixes with water, forming a homogeneous and exceptionally stable emulsion. It is used in the machining of both ferrous and nonferrous metals, particularly when cutting with carbon or high speed steel or tungsten carbide tools. It contains an effective biocide that combats bacterial growth, rancidity, and odor in machine sumps. Heavy Duty Gear/Hydraulic Oils TextranPrem TDH Super Tractor 15W40 Textran TDH Premium is a high quality, multi-functional, specially formulated,tractor hydraulic fluid(thf) for use in transmissions, wet brakes, hydraulic systems and final drives of modern farm and industrial wheel and crawler tractors where fluids meeting API GL-4 and major THF specifications are recommended. APPLICATIONS Where tractor manufacturers specify the use of a THF type product Mixed fleets of agricultural tractors and associated equipment Automotive manual transmissions and gearboxes Mobile hydraulic systems Enclosed oil immersed (wet) brakes Power take off (PTO) clutches PRODUCT BENEFITS Maximises transmission life: Extremely shear stable formulation maintains film thickness under severe transmission and hydraulic system operation, protecting vital components against scuffing and wear. Effective anti wear additive also reduces wear by forming a protective layer on metal surfaces under high load conditions. Longer oil life: Very high oxidation stability protects against the formation of gums and varnishes, reducing oil thickening and increasing oil life. Saves on maintenance: Highly refined base oils and effective oxidation inhibitors provide excellent thermal and oxidation stability, providing superior resistance to the formation of lacquer, deposits and corrosive oil degradation by-products. Multi-viscosity characteristics ensure rapid oil circulation on start-up, preventing wear which contributes to power loses.

14 Smooth and quiet operation: Special friction modifier component allows smooth action of the wet brakes and power take off clutches minimising chatter, stick slip and squawk and ensures maximum brake efficiency. PERFORMANCE STANDARDS API Service Category GL-4 Ford M2C134-D JI Case 1206/1207/1209 John Deere JD20C Massey Ferguson MF-1135, MF-1141, MF-1143 New Holland NH 410 B Volvo (VME WB 101) Meets the performance requirements of: Allison C-4 Caterpillar TO-2 (obsolete) Denison HF-O Deutz Fiat Komatsu (based on field experience and local Komatsu acknowledgment) Kubota Renault Renk heavy duty automatic tranmissions Vickers M-2950-S ZF TE-ML 05/06 Heavy Duty Coolants ELC Premix 50/50

15 Recommended Use Cat ELC meets or exceeds the requirements of the following specifications and guidelines: Cat EC-1 ASTM D-3306 ASTM D-6210 TMC RP-329 TMC RP-338 SAE J1034 Discover the Difference Cat ELC is developed, tested and approved by Caterpillar to meet the same high standards as all genuine Cat parts. Factory-Fill - Used as standard factory-fill for all Cat machine cooling systems. Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. Cat ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements. Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection of copper, solder, brass, steel, cast iron and aluminum. Marine Oil Super Outboard 3 Super Outboard 3 is a premium performance, two stroke, marine outboard motor oil formulated with a special ashless additive system. It is pre diluted with a high flash point solvent to facilitate mixing with petrol at all temperatures and is designed for engines requiring NMMA TC-W3 certified lubricants, operating in all service conditions. RECOMMENDED FOR All water cooled, high performance, two stroke, marine outboard engines, including the latest designs under warranty protection. Oil injected engines. Oil-petrol premix engines at all petrol-to-oil ratios up to and including 100:1. Air cooled, two stroke engines where API TD or NMMA certified oils are specified. PRODUCT BENEFITS Maintains high power output: The special blend of highly refined mineral oil and ashless additive system provides superior piston cleanliness and protection against ring sticking by minimising deposit formation, thus maintaining combustion efficiency and protecting against power loss. Reduces maintenance costs: The special ashless additive system includes a selected synthetic component for enhanced lubricity to separate contacting surfaces with a tough lubricant film to protect against wear under high speed, peak performance conditions.

16 Trouble free operation: The ashless additive system ensures that ash induced deposits are not formed in the combustion chamber, thereby eliminating the risk of destructive pre ignition from this source. Maximises spark plug life: The ashless additive system reduces spark plug fouling under all operating conditions