Creating Flow through Shared Resources

Size: px
Start display at page:

Download "Creating Flow through Shared Resources"

Transcription

1 Creating Flow through Shared Resources Kevin J. Duggan, Founder

2 Renowned expert in applying advanced lean techniques to achieve Operational Excellence Author of four books on the subject Kevin has guided many major corporations worldwide, including FMC Technologies, Chromalloy, Aetna, SpaceX, Caterpillar, Pratt & Whitney, Singapore Airlines, Sikorsky, IDEX Corporation and Parker Hannifin Featured on CNN and the Fox Business Network Frequent keynote speaker, master of ceremonies, and panelist at international conferences Kevin J. Duggan

3 Kevin J. Duggan Kevin has assisted many major corporations worldwide including FMC Technologies, Chromalloy, Aetna, SpaceX, Caterpillar, Pratt & Whitney, Singapore Airlines, Sikorsky, IDEX Corporation, CN Railroad, Express Jet, and Parker Hannifin Frequent keynote speaker, master of ceremonies, and panelist at international conferences, and has appeared on CNN and the Fox Business Network.

4 Continuous Improvement Companies have done continuous improvement activities for years

5 Continuous Improvement Pareto

6 Continuous Improvement Impact Effort

7 Continuous Improvement

8 Improve Improve Improve Sustain The Lean Journey Sustain Sustain

9 Level of improvement Operational Excellence Mature lean company Time in Years

10 Level of improvement Operational Excellence Operational Excellence Time in Years

11 The Jump to Operational Excellence Level of improvement Time in Years

12 Operational Excellence When each and every employee can see the flow of value to the customer, and fix that flow before it breaks down. SM Kevin J. Duggan

13 The Eight Steps to Achieve Operational Excellence 1. Design a lean flow using lean guidelines. 2. Implement a lean flow. 3. Make the lean flow visual. 4. Create standard work for the lean flow. 5. Make abnormal flow visual. 6. Create standard work for the abnormal flow. 7. Teach employees to maintain and improve the flow to the customer. 8. Free management to work on offense.

14 The Eight Steps to Achieve Operational Excellence 1. Design a lean flow using lean guidelines. 2. Implement a lean flow. 3. Make the lean flow visual. 4. Create standard work for the lean flow. 5. Make abnormal flow visual. 6. Create standard work for the abnormal flow. 7. Teach employees to maintain and improve the flow to the customer. 8. Free management to work on offense.

15 Supplier Weekly Eight Guidelines for End-to-End Value 6 Week Forecast Production Control XOXO Form Assembly Test Ship FIFO Weekly Orders FIFO Stream Design Customer Daily 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Eight VS Guidelines

16 Ten Guidelines Ten Guidelines for the for Mixed the Mixed Model Model Pacemaker Production 6 Week Control Forecast Supplier Weekly XOXO Pacemaker Weekly Orders Customer Daily Form Assembly Test Ship FIFO FIFO 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Pacemaker Ten MM Guidelines

17 Six Guidelines for Shared Resources Flow 6 Week Forecast Supplier Weekly Shared Resource Form Production Control XOXO Assembly Shared Resource FIFO Test Weekly Orders FIFO Customer Daily 2 days 1 day 1 day 1 day 5 days 2 sec 20 min 10 min 15 min 45 min Ship Six SRF Guidelines

18 Nine Guidelines Nine Guidelines for Office Flow for Office Flow Customers Request Form P/T=15 min. 1 CSR Create File Sales Database FIFO Design Pkg. Max = 1.5 days days Log File 4 Hrs. Estimating Cell Takt = 60 min. P/T=170 min. PC/T=55 min. Op = 3 17 Min. 170 Min. Post Office Customers 4 Estimates per Day 1.5 Days min 187 min. L/T P/T Nine Office Guidelines

19 Beijing Walls China Seven Guidelines for Supply Chain Flow Practical Solutions (MO) Premier Rail Cars Axle Co. Unlimited (WV) FIFO Seven SC Guidelines

20 Stam p Weldin g Solderi ng Introduction to Shared Resources Assemb ly FIFO Moldin g Inspectio n Test Decoratin g FIFO Ship Six SRF Guidelines

21 Normal vs. Abnormal Flow Normal Abnormal

22 Cut cost Increase OTD Lean Increase efficiency Reduce lead time Improve quality Operational Excellence Brand recognition VOC Increased sales Higher market share

23 Lean Journey Continue to drill deeply to eliminate waste Lean and Operational Excellence Lean Journey Operational Excellence Ops management spends most of its time on activities that grow the business: Brand recognition Voice of the customer Solution provider Technology improvements

24 Bridge Lean to Operational Excellence

25 Automotive Model Introduction to Shared Resources Fixed Sequence (Mixed Model)

26 Introduction to Shared Resources What is a shared resource? Process A process that is responsible for more than one product family

27 American Pump current state factory layout.

28 American Pump current state factory layout, material flow: Cylinder Medium Pump Piston Small Pump Large Pump

29 Product Family Definition Value Stream Mapping Review Current State Map The 4 Step Process Future State Map Implementation Plan

30 Part Number Saw (x2) Grind (x2) Drill Mill Machine Deburr Heat Treat CNC Lathe 1 CNC Dual Spindle Lathe Product Family Matrix x x x x x x A x A x x x x x x x x A x x A x x x x x x x x x x A x x x x x x x x x x x x x A A x x x x x x A x x x x x x x x x x x x x A x A x x x x x x x x A x x A x x x x x x x x x A x x A x x x x x x x A x x x x x x x x x x x x A x x x x x x x x x x x x x A x x x x x x x A x x x x x x x x x x x A x x A x x x x x x x x x x x x x x A x x A x x A A x x x x x x x x x x x x x x A x x x x x x x x x x x A x x x x x x x x x x x x A x A x x x x x x x x A x x A x x x x x x x A x x x x x x x Manual Deburr Hone Shared Polish Stamp Carburize Sub Assembly Dedicated Paint Final Assembly Test Inspection Ship

31 Work Part Number Family Content Small Pump Small Pump Small Pump Small Pump Medium Pump Medium Pump Medium Pump Medium Pump Large Pump Large Pump Large Pump Large Pump Cylinder Cylinder Cylinder Cylinder Piston Piston Piston Piston Sub Assembly Work Content Times Dedicated Paint Final Assembly Test Inspection Ship There should be no more than a 30% variation in the work content.

32 Shared Dedicated American Pump current state factory layout, subassembly and final assembly dedicated.

33 Product Family Definition Value Stream Mapping Review Current State Map The 4 Step Process Future State Map Implementation Plan

34 Shared Dedicated

35 Product Family Definition Value Stream Mapping Review Current State Map The 4 Step Process Future State Map Implementation Plan

36 1. Can we extend the product families? Design Guidelines 2. Can we create process families with dedicated equipment? 3. Can we create flow through true shared resources? 4. Can we balance to create continuous flow? 5. How will the shared resource know what to make next? 6. How will we manage the shared resource?

37

38 Shared Resource Analysis 1. Can we extend the product families?

39 Can we Dedicate a Shared Resource? A few guidelines: Focus on active part numbers only Concentrate on the top 80% by volume Dedicate as much as possible Separate uptime and yield from run time identify factors

40 Calculating Machine Load at the Deburr Manual Deburr AT = 450 minutes (1 Shift) PLT = 414 minutes 306 minutes M Time left for CO Uptime = 6 minutes 300 minutes Machine Deburr AT = 450 minutes PLT = 414 minutes 301 minutes Cyl. Lg. Sh. Sm. Sh. Time left for CO Uptime = 6 minutes 90 minutes 125 minutes 80 minutes

41 I 4.9 d I 72 CNC Lathe CT=30 min. CO=25 min. UP=95 % Machine Loading 2 I 24 Manual Deburr CT=25 min. UP=98 % A/T = 450 minutes (1 Shift) PLT = 414 minutes 306 minutes The Shaft Branch M Time left for c/o Uptime = 6 minutes 300 minutes

42 CNC Lathe 1 AT = 450 minutes PLT = 414 minutes 379 minutes M Time left for CO Uptime = 19 minutes Run time = 360 minutes CNC Dual Spindle Lathe AT = 900 minutes PLT = 828 minutes Run Time = 200 minutes 563 minutes The Shaft Branch C L S Time left for CO Uptime = 28 minutes Run time = 160 minutes Run time = 175 minutes

43 Machine Loading I 72 CNC Lathe 1 Assign p/n s CT=30 min. UP=95 % A/T = 450 minutes (1 Shift) PLT = 414 minutes 379 minutes M. Sh. I 24 The Shaft Branch Manual Deburr Assign p/n s CT=25 min. UP=98 % A/T = 450 minutes (1 Shift) PLT = 414 minutes 306 minutes M. Sh.

44 6 d 2 d

45 6 d 2 d

46 1. Can we extend the product families? Design Guidelines 2. Can we create process families with dedicated equipment? 3. Can we create flow through true shared resources? 4. Can we balance to create continuous flow? 5. How will the shared resource know what to make next? 6. How will we manage the shared resource?

47 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

48 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

49 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

50 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

51 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

52 Benefits of a Process Family Dedicate set of tools Create universal fixtures Have all programs local on machines Reduction in setup times Operator TPM / increased uptime Visual flow Self healing flow / Operational Excellence

53 1. Can we extend the product families? Design Guidelines 2. Can we create process families with dedicated equipment? 3. Can we create flow through true shared resources? 4. Can we balance to create continuous flow? 5. How will the shared resource know what to make next? 6. How will we manage the shared resource?

54 Saw 1 End Plate & Rotor Process Family Grind 1 Drill Small Pump Asy Cylinder Asy Piston Asy

55 End Plate & Rotor Process Family Saw/Grind/Drill Small Pump Asy Cylinder Asy Piston Asy

56 Branch Takt time Takt Time Customer demand rate for the product family Branch Takt Customer demand for all the products that go through the process family

57 Branch Takt vs. Cycle Time at the End Plate & Rotor Process Family Branch Takt = 18 min./pc. Time CT = 15 min. CT = 12 CT = 8 min. min. Saw 1 Grind 1 Drill

58 What is the Interval of the Shared EPEI = Every Part Every Interval Resource? How long it will take to produce all the part numbers within a process family Longest interval wins The smaller we can make the interval, the better the flow through the shared resource.

59 We would compare the total time needed to the available working time (PLT) per interval. Any leftover time can be used for changeovers. Time left for changeovers Uptime factor Total run time What is the Interval of the Shared Time Machine Available time Planned load threshold (85% - 95% of available time) Total time needed per interval Resource?

60 I 2 Days Saw 1 CT=8 min. CO= 5 min. UP=95 % EPEI = 1 day I 2 Days Longest Interval Wins Grind 1 CT=15 min. CO= 15 min. UP=95 % EPEI = 2 days I 2 Days Drill CT=12 min. CO= 7 min. UP=100 % EPEI = 1 day

61 American Pump factory layout with Saw 1, Grind 1, and Drill combined into a cell making small, medium, and large end plates and rotors.

62

63

64 I 5.7 d I 86 Mill CT=25 min. CO= 45 min. UP=95 % I 2.9 d I 36 Shared Resource Analysis Machine Deburr CT=25 min. CO= 0.25 min. UP=98 % The Impeller Branch I 1.9 d I 20 Heat Treat CT= min. CO= 50 min. UP=95 %

65 1. Can we extend the product families? Key Questions 2. Can we create process families with dedicated equipment? 3. Can we create flow through true shared resources? 4. Can we balance to create continuous flow? 5. How will the shared resource know what to make next? 6. How will we manage the shared resource?

66 Process A FIFO First In First Out FIFO is a form of flow used to regulate two disconnected processes FIFO is similar to ping pong balls going through a pipe. They always come out in the same order, and the pipe is only so big. Once you fill it, that s it. Max = 4 FIFO Process B

67 Machine Deburr Connecting the Machine Deburr to the Heat Treat with a Single FIFO Lane Family Cylinder Small Impellers Medium Impellers Large Impellers CT Heat Treat

68 Machine Deburr Connecting the Machine Deburr to the Heat Treat with a Single FIFO Lane Family Cylinder Small Impellers Medium Impellers Large Impellers CT Heat Treat

69 Connecting the Machine Deburr to the Heat Treat with a Single FIFO Lane Family Cylinder Small Impellers Medium Impellers Large Impellers Machine Deburr CT Heat Treat

70 Multiple FIFO Lanes Multiple FIFO Lanes is an ideal approach to create flow with shared resources! Provides more flexibility for managing flow with multiple families than a single lane. Great approach to managing flow into a shared resource from multiple inputs, including multiple pass items and rework loops. Key Questions How many? How big? How used? Mix Indicator Next job

71

72 Q & A Session Conclusion

73 Live Training Events Each year the Institute for Operational Excellence producing training events throughout the U.S. and Europe. London, England May 8-10, 2017 Denver, CO June 12-14, 2017 Anaheim, CA October 16-18, 2017 London, England May 11, 2017 Denver, CO June 15, 2017 Anaheim, CA October 19, 2017 For more information please visit Institute for Operational Excellence. All Right Reserved.

Creating Mixed Model Value Streams

Creating Mixed Model Value Streams Creating Mixed Model Value Streams Kevin J. Duggan, Founder Renowned expert in applying advanced lean techniques to achieve Operational Excellence Author of four books on the subject Kevin has guided many

More information

The Airline Industry Delta Air Lines, Inc. Technical Operations Engine Maintenance Operations

The Airline Industry Delta Air Lines, Inc. Technical Operations Engine Maintenance Operations The Airline Industry Delta Air Lines, Inc. Technical Operations Engine Maintenance Operations A Case Study: The Change and Challenge in Engine Maintenance Gary Adams Matt Sparks Manager, Engine Repair

More information

MIXED-MODEL LINE DESIGN LINE DESIGN CALCULATION FLOW

MIXED-MODEL LINE DESIGN LINE DESIGN CALCULATION FLOW MIED-MODEL LINE DESIGN LINE DESIGN CALCULATION FLOW Product 22227777-CDT 33338888-CDT Dc s Required / Optional % Dc 155 65 64 38 Product 22227777-CDT 33338888-CDT Yield Process Terminal Ass'y Ass'y Process

More information

ENERGY MANAGEMENT AT COOPER TIRE

ENERGY MANAGEMENT AT COOPER TIRE OMA Energy Committee June 25, 2014 Anthony Smith, PE ENERGY MANAGEMENT AT COOPER TIRE 1 A Leader in the Tire Industry 5% 2012 Sales by Segment 35% North America 65% International 5% Sales by Product 20%

More information

Lithium Ion Battery Recycling Market 2018

Lithium Ion Battery Recycling Market 2018 Lithium Ion Battery Recycling Market 2018 October 2018 Shmuel De-Leon Shmuel De-Leon Energy, Ltd. www.sdle.co.il, shmuel@sdle.co.il What we are Dealing with? These are mobile phone Li-Ion Batteries Just

More information

Brake caliper machining: improve process control and reduce inspection costs

Brake caliper machining: improve process control and reduce inspection costs Case brief Brake caliper machining: improve process control and reduce inspection costs Reduce part costs Full traceability High accuracy automated shop floor gauging Overview Manufacturers of brake calipers

More information

2013 Autumn Conference

2013 Autumn Conference KEPLER CHEUVREUX 2013 Autumn Conference Paris, September 18, 2013 1 Kepler Cheuvreux 2013 Autumn Conference September 18, 2013 September 18, 2013 2013 AUTUMN CONFERENCE 1 STRATEGY MOVING FORWARD AS SCHEDULED

More information

Industrial Strategy. Jean-Martin FOLZ CEO of PSA Peugeot Citroën. January 28, 2003

Industrial Strategy. Jean-Martin FOLZ CEO of PSA Peugeot Citroën. January 28, 2003 Industrial Strategy Jean-Martin FOLZ CEO of PSA Peugeot Citroën January 28, 2003 1 A fast-growing production base > 55% increase between 1998 and 2002 > 22% increase by 2006 > 55% increase in 5 years >

More information

Continental Mobility Study Klaus Sommer Hanover, December 15, 2011

Continental Mobility Study Klaus Sommer Hanover, December 15, 2011 Klaus Sommer Hanover, December 15, 2011 Content International requirements and expectations for E-Mobility Urbanization What are the challenges of individual mobility for international megacities? What

More information

Company profile for wheels production HEELS PRODUCTION MADE IN ITALY

Company profile for wheels production HEELS PRODUCTION MADE IN ITALY Company profile for wheels production HEELS PRODUCTION w w w. i m t i n t e r m a t o. i t 3 1983 Production of vertical turning lathes for the machining of allumium light alloy wheels begins. 1987 Introduction

More information

A True Innovation in Oil Lubrication Technology

A True Innovation in Oil Lubrication Technology ORSCO Continuous Spray System: A True Innovation in Oil Lubrication Technology The ORSCO Philosophy: The best approach to lubrication is to deliver the least amount of lubricant required. Anything else

More information

RESULTS READER SURVEY TRENDS IN EMPLOYMENT MACHINE TOOL INVESTMENT OUTSOURCING AND OTHER GEAR INDUSTRY BUSINESS PRACTICES

RESULTS READER SURVEY TRENDS IN EMPLOYMENT MACHINE TOOL INVESTMENT OUTSOURCING AND OTHER GEAR INDUSTRY BUSINESS PRACTICES READER SURVEY RESULTS TRENDS IN EMPLOYMENT MACHINE TOOL INVESTMENT OUTSOURCING AND OTHER GEAR INDUSTRY BUSINESS PRACTICES 8 of Gear Industry Respondents are Optimistic About their Ability to Compete over

More information

Product / Application Overview. Rev 5.00

Product / Application Overview. Rev 5.00 Product / Application Overview Rev 5.00 Kyntronics specializes in Actuation Solutions across many industries including Medical, Aerospace & Industrial. The Kyntronics team has extensive Motion Control

More information

Car Sharing at a. with great results.

Car Sharing at a. with great results. Car Sharing at a Denver tweaks its parking system with great results. By Robert Ferrin L aunched earlier this year, Denver s car sharing program is a fee-based service that provides a shared vehicle fleet

More information

Avon Products, Inc. Particulars. RSPO Annual Communications of Progress Particulars Form. About Your Organisation. 1.1 Name of your organization

Avon Products, Inc. Particulars. RSPO Annual Communications of Progress Particulars Form. About Your Organisation. 1.1 Name of your organization Particulars About Your Organisation 1.1 Name of your organization Avon Products, Inc. 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors

More information

NCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles

NCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles The UK trade body for the caravan, motorhome, caravan holiday and park home industry. NCC Leisure Battery Verification Scheme Leisure Accommodation Vehicles Page 1 of 11 1 Scope The NCC Battery Verification

More information

An investigational model for reduction of tied up capital and deepened supplier collaboration - A case study at ABB Xinhui and ABB Cewe-Control

An investigational model for reduction of tied up capital and deepened supplier collaboration - A case study at ABB Xinhui and ABB Cewe-Control An investigational model for reduction of tied up capital and deepened supplier collaboration - A case study at ABB Xinhui and ABB Cewe-Control Sanna Melin & Therese Råvik January 2010 Lund University,

More information

Force Control for Machining Applications

Force Control for Machining Applications Bernd Kuhlenkötter Head of Product Management & Technology 10.01.2008 Force Control for Machining Applications Robotics - 1 July 2007 Facts about ABB Robotics - 2 October 2007 Headquarters: Zurich, Switzerland

More information

Presentation of NHIC Machine-tools dealer & Expert in industrial performance

Presentation of NHIC Machine-tools dealer & Expert in industrial performance October 2017 Presentation of NHIC Machine-tools dealer & Expert in industrial performance SUMMARY : 1) Introduction. 2) Presentation of company NHIC. 3) Sale of machine-tools : new and second hand. 4)

More information

Gear Drive Solutions a Dedicated and Reliable Partner

Gear Drive Solutions a Dedicated and Reliable Partner Gear Drive Solutions a Dedicated and Reliable Partner /// Gears, spindle gears, actuators, motors etc. /// Flange bearing and pillow block bearing units /// Standard or customized products /// Complete

More information

Hunter Products Made in the USA

Hunter Products Made in the USA Family owned in the USA Hunter Engineering s History Hall in Bridgeton, Missouri Automotive service equipment made right here in the USA Bridgeton, Missouri Since 1946 Over the years, Hunter has built

More information

Decommissioning & Re-use in NL: A Joint Effort

Decommissioning & Re-use in NL: A Joint Effort Oil & Gas Industry Forecast 2017 Decommissioning & Re-use in NL: A Joint Effort 28 March 2017 Agenda About EBN & NOGEPA Dutch decommissioning challenge NL Masterplan Joint Industry Project H1 2017 Summary

More information

Batteries & Fuel Cells Seminar

Batteries & Fuel Cells Seminar Batteries & Fuel Cells Seminar About Batteries & Fuel Cells Seminar The seminar program focuses on present and future needs of portable and stationary electrochemical energy sources and highlights the

More information

Hours of work or rest (Reg. 2.3) Basic requirements

Hours of work or rest (Reg. 2.3) Basic requirements 3.6 Hours of work or rest Hours of work or rest (Reg. 2.3) Basic requirements The minimum hours of rest* must not be less than ten hours in any 24- hour period and 77 hours in any seven-day period, if

More information

Klaus Fröhlich Member of the Board of Management of BMW AG, Development. Oliver Zipse Member of the Board of Management of BMW AG, Production

Klaus Fröhlich Member of the Board of Management of BMW AG, Development. Oliver Zipse Member of the Board of Management of BMW AG, Production Media Information - Check against delivery - Klaus Fröhlich Member of the Board of Management of BMW AG, Development Oliver Zipse Member of the Board of Management of BMW AG, Production BMW Group Press

More information

Linamar in North Carolina. October 18, 2017

Linamar in North Carolina. October 18, 2017 Linamar in North Carolina October 18, 2017 Linamar in North Carolina Corporate Overview Decision Process Why North Carolina Current Footprint Growth Plans Linamar Corporation 2 Global Overview Key Facts

More information

EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY

EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY EV ELECTRIFICATION FOR SUSTAINABLE PROFITABILITY AGENDA 03 Emobility Experts 05 Think Global Act Local 06 Brand Identity Focus 07 08 Experience Projects Major Deliverables 09 Contact EMOBILITY EXPERTS

More information

Dynamic Map Development in SIP-adus

Dynamic Map Development in SIP-adus ITS World Congress in Melbourne 2016 SIS26 Digital Infrastructure for Automated Vehicles : challenges and international collaboration Dynamic Map Development in SIP-adus Cross-Ministerial Strategic Innovation

More information

BUS RAPID TRAN SIT. Institute of Tra nsporta tion Engineers October 17, 2013

BUS RAPID TRAN SIT. Institute of Tra nsporta tion Engineers October 17, 2013 Institute of Tra nsporta tion Engineers October 17, 2013 Why is VTA d oing BRT? Building a transit network for today and future Fast, frequent core network Focus improvements in growing corridors Pursuing

More information

BAUMA April 2016

BAUMA April 2016 Press Release BAUMA 2016 11 17 April 2016 Press Release SECMAIR GreenSwift BOMAG BF 300 MARINI BE TOWER Press Release / Pre-BAUMA 2016 FAYAT ROAD BUILDING EQUIPMENT Page 1/ 10 Road Building Equipment Division

More information

Technical Robustness and Quality

Technical Robustness and Quality Technical Robustness and Quality www.teamrush27.net Rock Solid Robot Page Title 1-4 Robustness In Concept And Fabrication 5 Creative Concepts For Tomorrow s Technology 6-8 Rock Solid Controls 9-10 Effectively

More information

PUBLICATION NEW TRENDS IN ELEVATORING SOLUTIONS FOR MEDIUM TO MEDIUM-HIGH BUILDINGS TO IMPROVE FLEXIBILITY

PUBLICATION NEW TRENDS IN ELEVATORING SOLUTIONS FOR MEDIUM TO MEDIUM-HIGH BUILDINGS TO IMPROVE FLEXIBILITY PUBLICATION NEW TRENDS IN ELEVATORING SOLUTIONS FOR MEDIUM TO MEDIUM-HIGH BUILDINGS TO IMPROVE FLEXIBILITY Johannes de Jong E-mail: johannes.de.jong@kone.com Marja-Liisa Siikonen E-mail: marja-liisa.siikonen@kone.com

More information

To provide exceptional aircraft turbine engine services through our commitment to quality and safety while exceeding our customers expectations.

To provide exceptional aircraft turbine engine services through our commitment to quality and safety while exceeding our customers expectations. 24 The AutoPILOT Southeast 2009 Southeast Turbines Southeast Turbines To provide exceptional aircraft turbine engine services through our commitment to quality and safety while exceeding our customers

More information

Global and China Camshaft Sensor Industry 2014 Market Research Report

Global and China Camshaft Sensor Industry 2014 Market Research Report 2014 QY Research Reports Global and China Camshaft Sensor Industry 2014 Market Research Report QY Research Reports included market size, share & analysis trends on Global and China Camshaft Sensor Industry

More information

Next Generation Reporting for Waste & Residue Supply Chain

Next Generation Reporting for Waste & Residue Supply Chain Next Generation Reporting for Waste & Residue Supply Chain Presented by : Vinesh Sinha Founder & Managing Director, FatHopes Energy Sdn Bhd Kuala Lumpur, Malaysia A little about myself Established the

More information

SPECIALTIES REFINERY. The definitive range in fuel treatment

SPECIALTIES REFINERY. The definitive range in fuel treatment Energy Fuel Specialties Refinery Processing Liquid Yield Crude Oil Storage and Treatment Demulsifiers, Asphaltene Dispersants, Drag Reducers, Pour Point Depressants, Biocides, Corrosion Inhibitors, Combustion,

More information

ME101, Final Examination, sample. Closed Book Examination (with the exception of one 3 x5 cards of handwritten notes, both sides, allowed)

ME101, Final Examination, sample. Closed Book Examination (with the exception of one 3 x5 cards of handwritten notes, both sides, allowed) , sample Name Closed Book Examination (with the exception of one 3 x5 cards of handwritten notes, both sides, allowed) Only calculators allowed for calculations: Hewlett Packard: The HP 33s and HP 35s

More information

Safer Alternatives to VOC-Emitting Lubricants, Vanishing Oils and Rust Inhibitors

Safer Alternatives to VOC-Emitting Lubricants, Vanishing Oils and Rust Inhibitors Safer Alternatives to VOC-Emitting Lubricants, Vanishing Oils and Rust Inhibitors October 23, 2008 Katy Wolf, Ph.D. Institute for Research and Technical Assistance INSTITUTE FOR RESEARCH AND TECHNICAL

More information

WOOD-BASED BIOREFINERIES PAVE THE WAY TO SUCCESFUL BIOECONOMY. Marko Janhunen UPM Biorefining, Gothenburg,

WOOD-BASED BIOREFINERIES PAVE THE WAY TO SUCCESFUL BIOECONOMY. Marko Janhunen UPM Biorefining, Gothenburg, WOOD-BASED BIOREFINERIES PAVE THE WAY TO SUCCESFUL BIOECONOMY Marko Janhunen UPM Biorefining, Gothenburg, 18.05.2017 2 UPM UPM today UPM BIOREFINING UPM ENERGY UPM RAFLATAC UPM SPECIALTY PAPERS UPM PAPER

More information

Global and China EV Charging Equipment Industry 2014 Market Research Report

Global and China EV Charging Equipment Industry 2014 Market Research Report 2014 QY Research Reports Global and China EV Charging Equipment Industry 2014 Market Research Report QY Research Reports included market size, share & analysis trends on Global and China EV Charging Equipment

More information

E-BOOK REPAIR VW HYDRAULIC PUMP IMPELLER DOCUMENT

E-BOOK REPAIR VW HYDRAULIC PUMP IMPELLER DOCUMENT 28 April, 2018 E-BOOK REPAIR VW HYDRAULIC PUMP IMPELLER DOCUMENT Document Filetype: PDF 448.13 KB 0 E-BOOK REPAIR VW HYDRAULIC PUMP IMPELLER DOCUMENT Failed tandem pump can cause oil to mix. Save power

More information

AUTOMOTIVE TECHNOLOGY 41 COURSE SYLLABUS

AUTOMOTIVE TECHNOLOGY 41 COURSE SYLLABUS AUTOMOTIVE TECHNOLOGY 41 COURSE SYLLABUS Course Description: Recommended: AT1 or pass the Auto Tech 1 Placement Test. Principles of engine rebuilding, includes diagnosis, removing, disassembly, cleaning,

More information

BMW Group posts record earnings for 2010

BMW Group posts record earnings for 2010 10.03.2011 BMW Group posts record earnings for 2010 Profit before tax rises to euro 4,836 million Profit before financial result climbs to euro 5,094 million Automobiles segment reports EBIT of euro 4,355

More information

Campbell County Gillette, Wyoming

Campbell County Gillette, Wyoming Campbell County Gillette, Wyoming Job Classification Title: FLSA Status: Non-Exempt Job Type: 1926 1940 Pay Range/Band: 52/23 56/25 Class specifications are intended to present a descriptive list of the

More information

Layout Analysis using Discrete Event Simulation: A Case Study

Layout Analysis using Discrete Event Simulation: A Case Study Proceedings of the 2010 Industrial Engineering Research Conference A. Johnson and J. Miller, eds. Layout Analysis using Discrete Event Simulation: A Case Study Abstract ID: 439 Robbie Holt, Lucas Simmons,

More information

TECHNICAL ISSUES IN DEVELOPMENT OF A VARIABLE HYBRIDITY FUELCELL LOCOMOTIVE

TECHNICAL ISSUES IN DEVELOPMENT OF A VARIABLE HYBRIDITY FUELCELL LOCOMOTIVE TECHNICAL ISSUES IN DEVELOPMENT OF A VARIABLE HYBRIDITY FUELCELL LOCOMOTIVE Arnold R Miller, PhD President Vehicle Projects LLC Denver, Colorado, USA 2 nd International Hydrogen Train and Hydrail Conference

More information

Transair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"]

Transair: Advanced Pipe Systems Pocket Installation Guide [1/2] [1] [1 1/2] [2] [2 1/2] [3] [4] [6] Transair: Advanced Pipe Systems Pocket Installation Guide [1/2"] [1"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"] Certifications and guarantees Offering a full range of diameters to fit your design needs. Transair

More information

Section 10: Driver s Hours of Service. Minnesota Trucking Regulations

Section 10: Driver s Hours of Service. Minnesota Trucking Regulations Section 10: Driver s Hours of Service Minnesota Trucking Regulations 71 Section 10 Driver s Hours of Service 49 CFR Part 395 and Minn. Stat. 221.0314 A carrier and its drivers are subject to the hours

More information

THREE MONTHS REPORT, JAN MARCH 2016

THREE MONTHS REPORT, JAN MARCH 2016 THREE MONTHS REPORT, JAN MARCH 2016 TELEPHONE CONFERENCE 26 APRIL, 2016, AT 14:30 CET TOMMY ANDERSSON, PRESIDENT AND CEO HELENA WENNERSTRÖM, EVP AND CFO TO PARTICIPATE, PLEASE CALL 5 MINUTES BEFORE THE

More information

Travel Forecasting Methodology

Travel Forecasting Methodology Travel Forecasting Methodology Introduction This technical memorandum documents the travel demand forecasting methodology used for the SH7 BRT Study. This memorandum includes discussion of the following:

More information

Global Metering Pump Market Research Report - Forecast to 2023

Global Metering Pump Market Research Report - Forecast to 2023 Report Information More information from: https://www.marketresearchfuture.com/reports/2913 Global Metering Pump Market Research Report - Forecast to 2023 Report / Search Code: MRFR/E&P/2137-HCRR Publish

More information

EBB key priorities and proposals

EBB key priorities and proposals Biodiesel in the post-2020 EU Renewable Energy Directive EBB key priorities and proposals Raffaello Garofalo EBB Secretary General rg@ebb-eu.org The European Biodiesel Board The European Biodiesel Board

More information

Our Experience Leveraging ENERGY STAR Recognition ALTRAMESE ROBERTS-TOMPKINS SENIOR ENGINEER PRODUCTION ENGINEERING TOYOTA MOTOR NORTH AMERICA

Our Experience Leveraging ENERGY STAR Recognition ALTRAMESE ROBERTS-TOMPKINS SENIOR ENGINEER PRODUCTION ENGINEERING TOYOTA MOTOR NORTH AMERICA 1 Our Experience Leveraging ENERGY STAR Recognition ALTRAMESE ROBERTS-TOMPKINS SENIOR ENGINEER PRODUCTION ENGINEERING TOYOTA MOTOR NORTH AMERICA Toyota North America Manufacturing & R&D 2 CAPTIN 1985 Vehicle

More information

AIRCRAFT ENGINE MECHANIC, 8602

AIRCRAFT ENGINE MECHANIC, 8602 May 2000 Federal Wage System Job Grading Standards FEDERAL WAGE SYSTEM JOB GRADING STANDARD FOR AIRCRAFT ENGINE MECHANIC, 8602 Theodore Roosevelt Building 1900 E Street, NW Washington, DC 20415-8330 Classification

More information

Performance Measure Summary - Hartford CT. Performance Measures and Definition of Terms

Performance Measure Summary - Hartford CT. Performance Measures and Definition of Terms Performance Measure Summary - Hartford CT There are several inventory and performance measures listed in the pages of this Urban Area Report for the years from 1982 to 2014. There is no single performance

More information

Residential Curbside Recycling

Residential Curbside Recycling Residential Curbside Recycling City of Lawrence Proposal December 4, 2012 Brief History For 66 years, exclusive trash service provider. - Early 90 s, successfully transitioned to 1 day/week trash service

More information

Smart systems. Smart traffic. Siemens Intelligent Traffic Systems

Smart systems. Smart traffic. Siemens Intelligent Traffic Systems Smart systems. Smart traffic. Siemens Intelligent Traffic Systems Unrestricted Siemens AG 2019 siemens.com/traffic The world of mobility is facing tremendous challenges We are facing the next mobility

More information

THANK YOU FOR PURCHASING OUR ROCKERS

THANK YOU FOR PURCHASING OUR ROCKERS THANK YOU FOR PURCHASING OUR ROCKERS We have designed and engineered these Real Chrysler rockers specifically for MOPAR wedge engines (not something modified to be close enough to work on a MOPAR). The

More information

DYNACORN 67 CAMARO BUILDUP, START-TO-FINISH

DYNACORN 67 CAMARO BUILDUP, START-TO-FINISH How To DYNACORN 67 CAMARO BUILDUP, START-TO-FINISH Part Two BY BOB MCCLURG In the last issue of Super Chevy CAMARO PERFORMERS Magazine, we kicked off our series on the buildup of Dynacorn Classic Bodies,

More information

Liebherr Troubleshoot Advisor

Liebherr Troubleshoot Advisor Liebherr Troubleshoot Advisor Specialized Mining Customer Support 2 Liebherr Troubleshoot Advisor Tailored service on-site packages Complete range of tools designed to save time and money Multitude of

More information

Power Electronics Applications where power electronics makes a real difference

Power Electronics Applications where power electronics makes a real difference Power Electronics Applications where power electronics makes a real difference Bill Drury Technical Advisor Emerson: Control Techniques RAEng V.P. Innovation Bristol University EPSRC Centre for Power Electronics

More information

Claude Chanson General Manager RECHARGE Association THE CHALLENGES FOR THE BATTERY INDUSTRY DEVELOPMENT FOR E-MOBILITY IN EUROPE

Claude Chanson General Manager RECHARGE Association THE CHALLENGES FOR THE BATTERY INDUSTRY DEVELOPMENT FOR E-MOBILITY IN EUROPE Claude Chanson General Manager RECHARGE Association THE CHALLENGES FOR THE BATTERY INDUSTRY DEVELOPMENT FOR E-MOBILITY IN EUROPE TECHNICAL ROAD MAP Many new technologies are under study or development:

More information

PARTNERS IN YOUR SUCCESS 1 SHREE GURUKRUPA ENGINEERING WORKS SHRI GURUKRUPA AUTOMATION PVT LTD

PARTNERS IN YOUR SUCCESS 1 SHREE GURUKRUPA ENGINEERING WORKS SHRI GURUKRUPA AUTOMATION PVT LTD PARTNERS IN YOUR SUCCESS 1 SHREE GURUKRUPA ENGINEERING WORKS SHRI GURUKRUPA AUTOMATION PVT LTD PARTNERS IN YOUR SUCCESS 2 INTRODUCTION Shri Gurukrupa Automation Pvt Ltd is the manufacturer of special purpose

More information

PEAK DEMAND MANAGEMENT IN NEW ENGLAND A DYNAMIC SOLUTION TO MANAGING PEAK DEMAND CHARGES

PEAK DEMAND MANAGEMENT IN NEW ENGLAND A DYNAMIC SOLUTION TO MANAGING PEAK DEMAND CHARGES PEAK DEMAND MANAGEMENT IN NEW ENGLAND A DYNAMIC SOLUTION TO MANAGING PEAK DEMAND CHARGES What are peak demand (capacity) charges? Every month your business is charged a fee called a capacity charge or

More information

LEAN FLOW TECHNOLOGY

LEAN FLOW TECHNOLOGY LEAN FLOW TECHNOLOGY - MODULE LFT103 - MIED-MODEL LINE DESIGN LEAN FLOW TECHNOLOGY MIED-MODEL LINE DESIGN PURPOSE Lean Flow Technology Line Design Concept. Resources Calculation. Line Design. Daily Resources

More information

Transforming the Battery Room with Lean Six Sigma

Transforming the Battery Room with Lean Six Sigma Transforming the Battery Room with Lean Six Sigma Presented by: Harold Vanasse Joe Posusney PRESENTATION TITLE 2017 MHI Copyright claimed for audiovisual works and sound recordings of seminar sessions.

More information

Performance Measure Summary - Fresno CA. Performance Measures and Definition of Terms

Performance Measure Summary - Fresno CA. Performance Measures and Definition of Terms Performance Measure Summary - Fresno CA There are several inventory and performance measures listed in the pages of this Urban Area Report for the years from 1982 to 2014. There is no single performance

More information

FUEL CELL MARKET GERMANY STATUS & OUTLOOK

FUEL CELL MARKET GERMANY STATUS & OUTLOOK FUEL CELL MARKET GERMANY STATUS & OUTLOOK Dr. Christoph Hartnig Berlin, September 20, 2017 Brennstoffzellen AGENDA 1 VDMA AG Fuel Cells 2 Heraeus Fuel Cells and Heraeus Group 3 VDMA Fuel Cells Survey 2

More information

Liebherr Troubleshoot Advisor

Liebherr Troubleshoot Advisor Liebherr Troubleshoot Advisor Worldclass support everywhere, every day 2 Liebherr Troubleshoot Advisor As a global mining solutions provider, Liebherr is more than a mining equipment manufacturer. Ensuring

More information

Gabelli & Company, Inc. 32 nd Automotive Aftermarket Symposium November 4, Page 1

Gabelli & Company, Inc. 32 nd Automotive Aftermarket Symposium November 4, Page 1 Gabelli & Company, Inc. 32 nd Automotive Aftermarket Symposium November 4, 2008 Page 1 Forward Looking Statements The Company claims the protection of the safe-harbor for forward-looking statements contained

More information

Automation & Power World 2011 April 18-21, 2011 in Orlando, Florida

Automation & Power World 2011 April 18-21, 2011 in Orlando, Florida Automation & Power World 2011 April 18-21, 2011 in Orlando, Florida Automation & Power World 2011 April 18-21, 2011 in Orlando, Florida Save the date for this must attend event! April 18-21, 2011 Orlando

More information

Performance Measure Summary - Charlotte NC-SC. Performance Measures and Definition of Terms

Performance Measure Summary - Charlotte NC-SC. Performance Measures and Definition of Terms Performance Measure Summary - Charlotte NC-SC There are several inventory and performance measures listed in the pages of this Urban Area Report for the years from 1982 to 2014. There is no single performance

More information

Performance Measure Summary - New York-Newark NY-NJ-CT. Performance Measures and Definition of Terms

Performance Measure Summary - New York-Newark NY-NJ-CT. Performance Measures and Definition of Terms Performance Measure Summary - New York-Newark NY-NJ-CT There are several inventory and performance measures listed in the pages of this Urban Area Report for the years from 1982 to 2014. There is no single

More information

Introduction. Established as reliable and innovative tier 2 supplier

Introduction. Established as reliable and innovative tier 2 supplier Coversheet Introduction Company founded in 2000 Established as reliable and innovative tier 2 supplier Product portfolio: Aircraft interior Hardware products: Latches, retainers and stowing devices Aircraft

More information

Mobility energy hubs: electric car sharing community in Singapore. G-STIC conference 24 October 2017

Mobility energy hubs: electric car sharing community in Singapore. G-STIC conference 24 October 2017 Mobility energy hubs: electric car sharing community in Singapore G-STIC conference 24 October 2017 BOLLORÉ: A FAMILY GROUP WITH A LONG-TERM STRATEGY Established in 1822, in Ergué-Gabéric (Brittany, France),

More information

Service Quality: Higher Ridership: Very Affordable: Image:

Service Quality: Higher Ridership: Very Affordable: Image: Over the past decade, much attention has been placed on the development of Bus Rapid Transit (BRT) systems. These systems provide rail-like service, but with buses, and are typically less expensive to

More information

A NEW ERA BEGINS. Page 3. Page 12 BMW GROUP FUTURE EXPERIENCE TOUR 2016 THE NEW BMW 5 SERIES

A NEW ERA BEGINS. Page 3. Page 12 BMW GROUP FUTURE EXPERIENCE TOUR 2016 THE NEW BMW 5 SERIES 0 1 6 A NW A BGIN BMW GOP FT XPINC TO 016 Page 3 TH NW BMW 5 I Page 1 0 1 6 The BMW Group has a clear vision: in the future our customers will have more options than ever before. Vehicles will be auto

More information

The Evolution of Side Crash Compatibility Between Cars, Light Trucks and Vans

The Evolution of Side Crash Compatibility Between Cars, Light Trucks and Vans 2003-01-0899 The Evolution of Side Crash Compatibility Between Cars, Light Trucks and Vans Hampton C. Gabler Rowan University Copyright 2003 SAE International ABSTRACT Several research studies have concluded

More information

Welcome to the world of HCS Group. Company Presentation, May 2018

Welcome to the world of HCS Group. Company Presentation, May 2018 Welcome to the world of HCS Group. Company Presentation, May 2018 istockphoto Our Vision HCS Group is a leading global provider of solutions for high-value specialty hydrocarbons HCS Group HCS Group Leading

More information

2010 Sponsorship Information Package

2010 Sponsorship Information Package 2010 Sponsorship Information Package 1 Contents Introduction 3 What is Formula SAE 4 Formula SAE Concept 5 Competition Regulations 6 University of Kentucky in FSAE 7 Sponsorship Benefits 8 Sponsorship

More information

Force Control for Machining applications. With speakers notes

Force Control for Machining applications. With speakers notes Force Control for Machining applications Robotics - 1 May 2007 Contents Introduction Project objectives, execution and result Features, benefits and technical solutions FC Pressure FC SpeedChange Graphical

More information

China Gas Station Industry Report,

China Gas Station Industry Report, China Gas Station Industry Report, 2007-2008 China's total vehicle quantity has increased rapidly in tandem with its fast economic development. China had a total of 56.96 million vehicles in 2007 and is

More information

Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy

Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy Batteries, Super Capacitors, Fuel Cells & EV`s Seminar April 9-10, 2018 Vimercate (MB), Italy The seminar program focuses on present and future needs of portable and stationary electrochemical energy sources

More information

Henkel s long-life odorless Bonderite L-MR cutting fluids for metalworking are giving Husqvarna and the environment a sustainability boost

Henkel s long-life odorless Bonderite L-MR cutting fluids for metalworking are giving Husqvarna and the environment a sustainability boost Case Study 2016/04/28 Henkel s long-life odorless Bonderite L-MR cutting fluids for metalworking are giving Husqvarna and the environment a sustainability boost Cool, lubricated and smell-free machining

More information

Section 5. Crude Oil and Natural Gas Resource Development

Section 5. Crude Oil and Natural Gas Resource Development Section 5. Crude Oil and Natural Gas Resource Development The September 4 rotary rig count was 1,4, slightly higher than the count in August 4 and 13 percent higher than the count in September 3. Of the

More information

Copyright 2016 by Innoviz All rights reserved. Innoviz

Copyright 2016 by Innoviz All rights reserved. Innoviz Innoviz 0 Cutting Edge 3D Sensing to Enable Fully Autonomous Vehicles May 2017 Innoviz 1 Autonomous Vehicles Industry Overview Innoviz 2 Autonomous Vehicles From Vision to Reality Uber Google Ford GM 3

More information

Background. If It Ain t Broke CASE STUDY

Background. If It Ain t Broke CASE STUDY Pratt & Whitney unlocks new capabilities and value by streamlining their infrastructure with an upgrade and consolidation from MCA v7 and SPM v9 to SPM v11 solution Pratt & Whitney When Pratt & Whitney

More information

offshore power Caterpillar Global Petroleum

offshore power Caterpillar Global Petroleum offshore power Caterpillar Global Petroleum PROVEN RELIABILITY AND DURABILITY With over 60 years of petroleum power experience and everything from small generator sets to offshore drilling modules. Caterpillar

More information

PERFORMANCE BRAKE SYSTEMS

PERFORMANCE BRAKE SYSTEMS 2013 PERFORMANCE BRAKE SYSTEMS StopTech Big Brake Kits Ultimate brake upgrades for road or track Larger rotors with patented cooling technology Stiffest calipers for reduced compliance Stainless Steel

More information

Identifying Potential Markets for Commercial Behind-the- Meter Battery Storage. September 19, 2017

Identifying Potential Markets for Commercial Behind-the- Meter Battery Storage. September 19, 2017 Identifying Potential Markets for Commercial Behind-the- Meter Battery Storage September 19, 2017 Housekeeping Use the red arrow to open and close your control panel Join audio: Choose Mic & Speakers to

More information

2015 Carbon footprint JTP. Date of issue: 14 th March 2016

2015 Carbon footprint JTP. Date of issue: 14 th March 2016 2015 Carbon footprint JTP Prepared by: Helen Troup Reviewed by: Sarah McCusker Date of issue: 14 th March 2016 Executive summary Carbon Smart 2 Executive summary JTP have seen significant reduction in

More information

SORL Auto Parts, Inc. (NASDAQ: SORL)

SORL Auto Parts, Inc. (NASDAQ: SORL) SORL Auto Parts, Inc. (NASDAQ: SORL) 2014 Investment Highlights A Leading Manufacturer of Auto Brake Systemin China and the World Growth Opportunities in China and Global Auto Market Strong Relationships

More information

An Open Standard for the Description of Roads in Driving Simulations

An Open Standard for the Description of Roads in Driving Simulations An Open Standard for the Description of Roads in Driving Simulations M. Dupuis VIRES Simulationstechnologie GmbH H. Grezlikowski DaimlerChrysler AG DSC Europe 04 October 2006 04 October 2006 copyright

More information

Section 2. Definitions

Section 2. Definitions Section 2 Definitions Words used in this By-law shall have the meaning assigned to them by sections 2, 9 and 10.5 of the Zoning and Development By-law unless otherwise stated and except as provided below.

More information

BENTELER International AG, Page 1

BENTELER International AG, Page 1 BENTELER International AG, 2019 Page 1 Page 2 THE BENTELER GROUP #FAMILY OF DRIVEN PROFESSIONALS 04 THREE DIVISIONS UNDER ONE UMBRELLA 09 FIGURES 11 WHERE WE COME FROM 13 WHERE WE GO #GLOBAL PARTNER 17

More information

Additive Manufacturing at voestalpine

Additive Manufacturing at voestalpine Additive Manufacturing at voestalpine Current applications from Topology optimization, tool manufacturing and special engineering www.voestalpine.com AGENDA 2 05. October 2017 Additive Manufacturing at

More information

COMPANY PRESENTATION Konecranes Plc. All rights reserved.

COMPANY PRESENTATION Konecranes Plc. All rights reserved. COMPANY PRESENTATION LIFTING BUSINESSES By applying our unique knowledge, innovative technology, and our responsive service attitude, we deliver the Highest Lifecycle Value and positively impact the productivity

More information

Shipdex Conference 16 February 2010 Augsburg, Germany < 1>

Shipdex Conference 16 February 2010 Augsburg, Germany < 1> Data Validation and Presentation Falk Aupers Senior Consultant CORENA Shipdex Conference 16 February 2010 Augsburg, Germany < 1> Presenter Dipl. Phys. Falk Aupers With CORENA since 2000 First S1000D experience

More information

Oregon DOT Slow-Speed Weigh-in-Motion (SWIM) Project: Analysis of Initial Weight Data

Oregon DOT Slow-Speed Weigh-in-Motion (SWIM) Project: Analysis of Initial Weight Data Portland State University PDXScholar Center for Urban Studies Publications and Reports Center for Urban Studies 7-1997 Oregon DOT Slow-Speed Weigh-in-Motion (SWIM) Project: Analysis of Initial Weight Data

More information

ANNA UNIVERSITY - M.C.A IV SEMESTER Problem Set MC1752/MC9242/ Resource Management Techniques

ANNA UNIVERSITY - M.C.A IV SEMESTER Problem Set MC1752/MC9242/ Resource Management Techniques Sou rce S r i V e n k a t e s w a r a C o l l e g e o f E n g i n e e r i n g, S r i p e r u m b u d u r D e p a r t m e n t o f C o m p u t e r A p p l i c a t i o n s ---------------------------------------------------------------------------------

More information