Air Breather Filter Pi Pi 0185
|
|
|
- Bryan Flynn
- 6 years ago
- Views:
Transcription
1 Air Breather Filter Pi 00 Pi 085 Features The Pi 00 through Pi 06 breather filters have housings made of noncorrosive material The air intake is located in the upper section, this prevents surface dust to be drawn in from the tank top The cover is designed to prevent entry of splashwater The disposable, pleated elements can be replaced in a matter of seconds The Pi 040 through Pi 085 breather filters have a housing made of galvanized sheet metal The builtin oring provides accurate sealing at the tank connection With the choice of Mic or SmL elements the CETOP RP 98 H requirements are fullfilled These specify the same filtration degree for the breather filter as the system filter utilizes Molelements prevent oil mist from emerging the tank The oil mist coagulate, forming drops within the pleated coalescer layer, which are returned to the tank Filters are fixed by threads, clamps or flanges Air breather filter Pi are offering the following features Corrosion resistant Compact design Equipped with Mic, SmL and Mol elements High dirt holding capacity Versatile mounting option: screwed, clamped or flanged Versatile combination possibilities Wide range of accessories Worldwide distribution
![rate Q [l/min] * without](/docs-images/73/69237480/images/2-2.jpg "grid Air Breather Pi")
2 Flow rate/pressure drop curve complete filter y = differential pressure p [bar] x = air flow rate Q [l/min] * without grid Air Breather Pi 00Pi 085
3 Filter complete Filter elements Cover with integrated service indicator (UM) Connection for maintenance indicator (VA) Pi 00 Mic Mic Pi 00 SmL SmL Pi 00 Mic Mic Pi 00 SmL SmL Pi 00 Mic Mic Pi 00 SmL SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 04 Mic Mic Pi 04 SmL SmL Pi 00 Mic Mic Pi 00 SmL SmL Pi 00 Mic UM Mic Pi 00 SmL/UM SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 0 Mic/UM Mic Pi 0 SmL/UM SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 0 Mic/UM Mic Pi 0 SmL/UM SmL Pi 0 Mic Mic Pi 0 SmL SmL Pi 0 Mic/UM Mic 7678 Pi 0 SmL/UM SmL 7778 Pi 05 Mic Mic 7778 Pi 05 SmL SmL 7985 Pi 05 Mic/UM Mic Pi 05 SmL/UM SmL Pi 06 Mic Mic Pi 06 SmL SmL Pi 06 Mic/UM Mic Pi 06 SmL/UM SmL Pi 040 Mic Mic Pi 040 SmL SmL Pi 040 Mol Mol Pi 040 Mic/VA Mic Pi 040 SmL/VA SmL Pi 040 Mol/VA Mol Pi 04 Mic Mic Pi 04 SmL SmL Pi 04 Mol Mol Pi 04 Mic/VA Mic Air Breather Pi 00Pi 085 Mic SmL Mol Quantity per pack
4 Filter complete Filter elements Mic SmL Mol Cover with integrated service indicator Connection for maintenance indicator (UM) (VA) Quantity per pack Pi 04 SmL/VA SmL Pi 04 Mol/VA Mol Pi 045 Mic Mic 760 Pi 045 SmL SmL 7605 Pi 045 Mic/UM Mic 760 Pi 045 SmL/UM SmL Pi 046 Mic Mic Pi 046 SmL SmL Pi 046 Mic/UM Mic 7607 Pi 046 SmL/UM SmL Pi 047 Mic Mic Pi 047 SmL SmL Pi 047 Mic/UM Mic 7604 Pi 047 SmL/UM SmL 760 Pi 048 Mic Mic Pi 048 SmL SmL 7600 Pi 048 Mic/UM Mic Pi 048 SmL/UM SmL 7606 Pi 049 Mic Mic Pi 049 SmL SmL 7607 Pi 049 Mic/UM Mic Pi 049 SmL/UM SmL Pi 05 Mic Mic Pi 05 SmL SmL Pi 05 Mol Mol Pi 05 Mic/VA Mic Pi 05 SmL/VA SmL Pi 05 Mol/VA Mol Pi 05 Mic Mic Pi 05 SmL SmL Pi 05 Mol Mol Pi 05 Mic/VA Mic Pi 05 SmL/VA SmL Pi 05 Mol/VA Mol Pi 054 Mic Mic Pi 054 SmL SmL Pi 054 Mol Mol Pi 054 Mic/VA Mic Pi 054 SmL/VA SmL Pi 054 Mol/VA Mol Pi 08 Mic Mic Pi 08 SmL SmL Pi 08 Mol Mol Pi 08 Mic/VA Mic Pi 08 SmL/VA SmL Air Breather Pi 00Pi 085 4
5 Filter complete Filter elements Mic SmL Mol Cover with integrated service indicator Connection for maintenance indicator (UM) (VA) Quantity per pack Pi 08 Mol/VA Mol Pi 08 Mic Mic Pi 08 SmL SmL Pi 08 Mol Mol Pi 08 Mic/VA Mic Pi 08 SmL/VA SmL Pi 08 Mol/VA Mol Pi 084 Mic Mic Pi 084 SmL SmL Pi 084 Mol Mol Pi 084 Mic/VA Mic Pi 084 SmL/VA SmL Pi 084 Mol/VA Mol Pi 085 Mic Mic Pi 085 SmL SmL Pi 085 Mol Mol 784 Pi 085 Mic/VA Mic Pi 085 SmL/VA SmL 784 Pi 085 Mol/VA Mol Air Breather Pi 00Pi 085 5
6 4 Technical specifications Separation: Mic SmL Mol Temperature range: 0 0 µm µm oil mist 0 C to +00 C (other temperature ranges on request) Housing material: Pi 00 to Pi 06 Pi 040 to Pi 04 Pi 045 to Pi 049 Pi 05 to Pi 054 Pi 08 to Pi 085 Sealing material: Pi 06 Pi 040 to Pi 085 Resistance: polyamide galvanized sheet metal polyamide galvanized sheet metal steel/al We draw attention to the fact that all values indicated are average values which do not always occur in specific cases of application Our products are continually being further developed Values, dimensions and weights can change as a result of this Our specialized department would be pleased to offer you advice We recommend you to contact us concerning applications of our filters in areas governed by the EU Directive 94/9 EC (ATEX 95) The standard version can be used for liquids based on mineral oil (corresponding to the fluids in Group of Directive 97/ EC Article 9) If you consider to use other fluids please contact us for additional support Subject to technical alteration without prior notice rubberized cork NBR all hydraulic oils Other elements for HFA, HFC and HFD fluids on request * mm dia screen removable * 6x screw M5x6 DIN 7500 (crossslotted) * 6x screw M5x6 DIN 7500 (crossslotted) *4 optional connection for maintenance indicator (VA) Air Breather Pi 00Pi 085 6
7 5 Dimensions Air flow rate [l/min]* Mic SmL Dimensions [mm/inch] [mm] [mm] [mm] [mm] D A B C E Mol Pi Mx Pi G/ Pi M6x Pi Mx Pi G/ Pi G/ Pi G/ Pi Mx Pi G Pi Ø Pi Ø Pi Ø 7**** 8 8 Pi 05 (without enclosure) Ø 7**** 8 8 Pi Ø 7**** 8 8 Pi Ø 40** Pi Ø 5** Pi *** Ø 7**** 8 Pi *** Ø 7**** 8 Pi *** Ø 40** 8 9 Pi *** Ø 5** 8 Pi *** G½ Pi Ø 70** Pi Ø 76** Pi Ø 80** Pi Ø 70** Pi Ø 76** Pi Ø 80** Pi Ø 00** *) when p is 00 bar (air flow can be reduced by air humidifying) **) clearance H ***) in preparation ****) connection according to DIN 4557 T (6x screw M5x6 and seal included in delivery) Air Breather Pi 00Pi 085 7
8 6 Maintenance indicator The types Pi may be equipped with a maintenance indicator for optimal filter element exploitation They indicate when the filter element must be serviced and thus save unnecessary costs Vacuum indicator/ Air breather Indicator setting [mbar ± 0 %] Temperature resistance [ C] Execution TB TB 745/ TB 746/ to Indication visual, selflocking * Execution * Execution * Indication: Position of display at nominal value in mbar Standard seal material of maintenance indicator: NBR Seal material types LES/LEO: Silicone rubber Vacuum switch Permissible overtemperpressure ature max resistance [bar] [ C] 0 to bar peaks to 0 Indicator setting [mbar ± 4] Air Breather Pi 00Pi 085 Contact type Connection size normally open normally closed M0x (inside) Material lower section Material upper section LES 50 I GDZnAI Polycarbonat LEO 50 I GDZnAI Polycarbonat 8
9 6 Maintenance indicator 7 Filling adapter Retrofit cover with integrated service indicator Filling adapter 7940 Retrofit cover with integrated service indicator for Pi 00049/UM 7859 Filling adapter with Walther coupling and dust cap Integrated step service indicator offers optimized filter element Tank connection: flange acc DIN 4557 part service life Switching level 00 % at 50 mbar Indication of 50 %, 75 %, 00 % of switching level by red gauge Gauge selflocking, handy turning knob to lock Material: Sealing material: Fixing screws: Al anodized cork 6 pcs M5x70 DIN 9 (included in delivery) * Connection for vacuum indicator (G/8) * Parts shown as dotted lines not included in delivery * Connection for filling coupling *4 Connection for extension pipe Air Breather Pi 00Pi 085 9
10 7 Filling adapter Characteristics of filling adapter MD0 and MD09: Robust adapter for filling with big crosssection for optimized filling Coupling for filling with dust cap acc delivery specifications of the automotive industry Fig Pi 05 Pi 045 UM MD09 Fig Pi 05 Pi 045 UM MD0 * * * *4 *5 *6 *7 Maintenance switch LTB 9 Dust cap Walther MD059 Closing nipple Steel ring Walther MD0WR 56 Flange pattern DIN 4557 D 7 Optional: Extension pipe DIN 9; Length acc to customer specification *8 On circumference Pi 05 MicUM/OS/MD Pi 05 SmLUM/OS/MD Pi 045 MicUM/OS/MD Pi 045 SmLUM/OS/MD0 Air Breather Pi 00Pi 085 Filling barrier integrated in the air breather Cover with visual service indicator, step, gauge, value selflocking Versatile connecting options * * * *4 *5 Maintenance switch LTB 9 Dust cap PVC, Walther LP09574KU Closing nippel, Walther MD09WR569VF Flange pattern DIN 4557 D 7 Optional: Extension pipe DIN 9; Length acc to costumer specification *6 On circumference Pi 05 MicUM/OS/MD Pi 05 SmLUM/OS/MD Pi 045 MicUM/OS/MD Pi 045 SmLUM/OS/MD09 0
11 8 Accessories * * * Expansion kit with spillage protection to combine with Pi 05/ Retrofit kit with preloaded valve to combine with Pi 05/06 Valve opening pressure: preload pressure 0 bar suction pressure 005 bar Perforated disc Valve disc Float ball: Opening point, max 05 bar Operating principle of spillage protection: The float ball (*) is guided over the filling strainer If the liquid level in the tank rises, the ball rises accordingly and closes the tank outlet by means of the valve disc (*) The valve disc is flexibly loaded to prevent the permissible pressure inside the tank from being exceeded Advantages of preloaded valve: Pump support due to preloaded reservoir Minimized air exchange with the contaminated/humid ambient Reduced ingress of humidity into the hydraulic system Air Breather Pi 00Pi 085
12 MAHLE Industriefiltration GmbH Schleifbachweg 45 D746 Öhringen Phone Fax wwwmahlecom /05 Air Breather Pi 00Pi 085
Air breather filter Pi 0201
Air breather filter Pi 0201 1. Features Filter for ventilating and bleeding mobile and stationary hydraulic tanks The air breather filter Pi 0201 with preloaded valves are used for tanks which are under
Suction Filter Pi 200
Suction Filter Pi 0 Nominal size up to 90 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system Compact design Minimal pressure drop through optimal
Suction Filter Pi 160
Suction Filter Pi 160 1. Features High performance filters for modern hydraulic systems _ Provided for tank mounting Compact design Minimal pressure drop through optimal flow design Visual/electrical/electronic
Low Pressure Filter/Suction Filter Pi 1941
Low Pressure Filter/Suction Filter Pi 1941 Nominal pressure 10/2 bar (140/360 psi), up to nominal size 63 1. Features High performance filters for modern hydraulic systems Provided for pipe installation
Line filter Pi Features. Nominal pressure 16 bar (230 psi), nominal size 400 up to 6000
Line filter Pi 1907 Nominal pressure 16 bar (20 psi), nominal size 400 up to 1 Features _ High performance filters for modern hydraulic systems Provided for pipe installation Modular design Compact design
Tank Top Return-Line Filter Pi 530
Tank Top ReturnLine Filter Pi 530 Nominal size 35 and 50 1.Features High performance filters for modern hydraulic systems Provided for tank top installation Modular system Compact design Minimal pressure
Medium Pressure Filter Pi 340
Medium Pressure Filter Pi 340 Nominal pressure 250/315/350 bar (3560/4480/4980 psi), nominal size up to 450 (also available with filter elements acc. to DIN 24550) 1. Features. High performance filters
Tank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 1000 according to DIN 24550 1. Features
Low Pressure Filter/Suction Filter Pi 270
Low Pressure Filter/Suction Filter Pi 270 Nominal pressure 10 bar (140 psi), up to nominal size 31 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular
Low Pressure Filter Pi 1500
Low Pressure Filter Pi 500 Nominal pressure /5 bar (40/360 psi), nominal size up to 600 Filter elements according to DIN 4550. Features High performance filters for modern hydraulic systems Provided for
High Pressure Filter Pi 4000
High Pressure Filter Pi 4000 Nominal pressure 400 bar (5690 psi), nominal size up to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
Duplex Filter Pi Features. Nominal pressure 10/16 bar (140/230 psi), nominal size 1250 up to 8000
Duplex Filter Pi 281 Nominal pressure / bar (140/230 psi), nominal size 1 up to 8000 1. Features _ High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop
Low Pressure Filter Pi 150
Low Pressure Filter Pi 150 Nominal pressure /25 bar (140/360 psi), nominal size up to 630 1. Features. High performance filters for modern hydraulic systems _ Provided for pipe installation Modular system
Low Pressure Filter/Suction Filter Pi 1941
Low Pressure Filter/Suction Filter Pi 1941 Nominal pressure 10/2 bar (140/360 psi), up to nominal size 63 1. Features High performance filters for modern hydraulic systems Provided for pipe installation
High Pressure Filter Pi 410
High Pressure Filter Pi 410 Nominal pressure 315 bar (4480 psi), nominal size -63 1. Features High performance filters for modern hydraulic systems Provided for valve block installation Modular system
Low Pressure Filter Pi 2300
Low Pressure Filter Pi 2300 Nominal pressure 25/40 bar (360/570 psi), nominal size up to 1 Filter elements according DIN 24550 1. Features High performance filters for modern hydraulic systems Provided
Duplex Filter Pi Features. Nominal pressure 25 bar (360 psi), nominal size 800 and 1400
Duplex Filter Pi 232 Nominal pressure 25 bar (360 psi), nominal size 800 and 1400 1. Features Duplex filter for gear boxes, lubrication and hydraulic systems Modular system Compact design Weight optimized
Low Pressure Filter Pi 2000
Low Pressure Filter Pi 00 Nominal pressure 32/63 bar (460/900 psi), nominal size up to 400 according DIN 24550 1. Features.. High performance filters for modern hydraulic systems Provided for pipe installation
Low Pressure Filter Spin-on Cartridges HC/OC
Low Pressure Filter Spinon Cartridges HC/OC Nominal pressure 10/16/25 bar (140/230/360 psi), nominal size up to 160 1. Features High performance filters for modern hydraulic systems Modular design Compact
Low Pressure Filter Pi 2000/Pi 2200
Low Pressure Filter Pi 2000/Pi 2200 Nominal pressure 25 bar (360 psi), nominal size 630 up to 2000 according to DIN 24550 1 Features : HIgh performance filters for modern hydraulic systems Modular system
Suction return line filter Pi 550
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Suction return line filter Pi 550 Nominal pressure 10 bar, nominal size 100 1. Features High-performance
High Pressure Filter Pi 420
High Pressure Filter Pi 4 Nominal pressure 400 bar (5690 psi), nominal size up to 450 optional reverse flow valve 1. Features High performance filters for modern hydraulic systems Modular system Compact
Duplex Filter Pi Features. Nominal pressure 40 bar (570 psi), nominal size 800 and 1100
Duplex Filter Pi 211 Nominal pressure 40 bar (570 psi), nominal size 800 and 1100 1. Features High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop through
Medium Pressure Filter Pi 360
Medium Pressure Filter Pi 360 Nominal pressure /315 bar (2990/44 psi), nominal size up to 450 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system
Oil Solutions. Phone Fax Low Pressure Filter Pi 150
Oil Solutions Phone 0421 336 009 Fax 03 9012 4332 sales@oilsolutionscomau wwwoilsolutionscomau Low Pressure Filter Pi 150 Operating pressure /25 bar, Nominal size up to 630 1 Features Efficient filters
Low Pressure Filter Spin-on Cartridges HC/OC
Low Pressure Filter Spin-on Cartridges HC/OC Nominal pressure 10/16/ bar (140/230/360 psi), nominal size up to 160 1. Features High performance filters for modern hydraulic systems Modular design Compact
High Pressure Filter Pi 422
High Pressure Filter Pi 422 Nominal pressure 400 bar (5690 psi), nominal size up to 450 optional reverse flow valve 1. Features High performance filters for modern hydraulic systems Modular system Compact
Tank top return-line filter Pi 5000
Tank top returnline filter Pi 5000 Nominal size 160 up to 00 according to DIN 24550 1 Features High performance filters for modern hydraulic systems Provided for tank top installation Modular system Compact
Tank top return-line filter Pi 5000
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Tank top return-line filter Pi 5000 Nominal size 160 up to 00 according to DIN 24550 1. Features
Medium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure /315 bar (3040/4570 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
Tank top return-line filter Pi 5000
Tank top return-line filter Pi 5000 Nominal size 40 up to 100 according to DIN 24550 1 Features High performance filters for modern hydraulic system Provided for tank top installation Modular system Compact
Duplex Filter Pi Features. Nominal pressure 40 bar (580 psi), nominal size up to 300
Duplex Filter Pi 241 Nominal pressure 40 bar (580 psi), nominal size up to 300 1. Features High performance filters for modern hydraulic, lubrication and fuel systems Modular system Compact design Minimal
Low Pressure Filter Pi 200
Low Pressure Filter Pi 0 Nominal pressure 25/63 bar (360/910 psi), nominal size up to 450 1. Features._ High performance filters for modern hydraulic systems Provided for pipe installation Modular system
Mobile Filter Units Pi 8100
Mobile Filter Units Pi 81 Flow rates 27 and 55 l/min 1. Features High performance filters for modern hydraulic systems Mobile bypass filtration for hydraulic and lubricating systems System and container
Low Pressure Filter Pi 200
Low Pressure Filter Pi 0 Nominal pressure 32/63 bar (460/910 psi), nominal size up to 600 1. Features._ High performance filters for modern hydraulic systems Provided for pipe installation Modular system
High Pressure Filter Pi 4230
High Pressure Filter 4230 Nominal pressure 315 bar (4570 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
Maintenance Indicators
. Features Filter elements are economically used only if their dirt holding capacity is fully exploited. This is achieved by using filter housings with a maintenance indicator. MAHLE manufactures maintenance
High Pressure Filter Pi 4230
High Pressure Filter Pi 4230 Nominal pressure 400 bar (5690 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
Duplex Filter Pi Features. Nominal pressure 25/63 bar (360/900 psi), nominal size up to 450
Duplex Filter Pi Nominal pressure 25/63 bar (360/900 psi), nominal size up to 450 1. Features.High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop through
Duplex Filter Pi 2100
Duplex Filter Pi 0 Nominal pressure 32/63 bar (460/900 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
Duplex Filter Pi 3700
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Duplex Filter Pi 3700 Nominal pressure 0/250/315 bar (2900/36/4570 psi), nominal size up to 400 according
Low Pressure Filter Pi 230
Low Pressure Filter Pi 230 Nominal pressure 25/40 bar, (360/570 psi), nominal size up to 1400 1. Features High performance filters for modern hydraulic systems Provided for pipe installation Modular system
Duplex Filter Pi Features. Nominal pressure 200/250 bar (2850/3560 psi), nominal size up to 450
Duplex Filter Pi 370 Nominal pressure 0/2 bar (28/3560 psi), nominal size up to 0 1. Features High performance filters for modern hydraulic systems _ Modular system Compact design Minimal pressure drop
Off-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
Duplex Filter Pi 4700
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Duplex Filter Pi 4700 Nominal pressure up to 315/350 bar (4570/4980 psi), nominal size 40 up to 400
Low Pressure Filter Pi 1500
Low Pressure Filter Pi 1500 Nominal pressure /25 bar (140/360 psi), nominal size up to 600 Filter elements according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided
Oil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
Oil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
Automatic metal-edge filter AF 75 S / AF 95 S
Automatic metal-edge filter AF 75 S / AF 95 S with radial scraper cleaning housing in welded design, optionally with cyclone effect Connection size DN 150, DN 200, DN 250 others upon request 1. Features
Low pressure filter Spin-on cartridges PX
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Low pressure filter Spin-on cartridges PX Nominal pressure 16/10 bar (230/140 psi), nominal size
Automatic metal-edge filters AF 72 G
Automatic metal-edge filters AF 72 G with radial scraper cleaning Connection size G1 1/2, flange DN 40 1 Short description MAHLE automatic metal-edge filters are suitable for all applications where low
Automatic filter AF 153 G
Automatic filter AF 153 G with scraper and external pressure cleaning Connection sizes: DN 50/G2, cast stainless steel 1 Features MAHLE automatic backflush filters are suitable for all applications where
Automatic metal-edge filter AF 71 G
Automatic metal-edge filter AF 71 G with radial scraper cleaning Connection size G1 1 Features MAHLE automatic metal-edge filters are suitable for all applications where low or high-viscosity liquids or
Automatic filter AF 173 G
Automatic filter AF 7 G with external pressure cleaning and integrated cyclone effect Connection sizes: G, screw-in flange DN 0 and DN, cast design Short description MAHLE automatic backflush filters are
Automatic filter AF 173 G
Automatic filter AF 7 G with external pressure cleaning and integrated cyclone effect Connection size DN 0/G, cast stainless steel Short description MAHLE automatic backflush filters are suitable for all
Automatic filter AF 113 G
Automatic filter AF G Cast design with internal pressure cleaning and integrated cyclone effect Connection sizes: G, screw in flange DN 0 and DN Short description MAHLE automatic backflush filters are
Filter elements for liquid filters Degree of filtration 2 µm up to 500 µm
Filter elements for liquid filters Degree of filtration 2 µm up to 500 µm Nominal size 5 up to 1800 Differential pressure resistant up to 210 bar (3045 psi) 1. Features _ High performance elements for
Automatic metal-edge filter AF 73 G/AF 93 G
Automatic metal-edge filter AF 73 G/AF 93 G with radial scraper cleaning Connection size G2, screw-in flange DN 50 and DN 65 1 Features MAHLE automatic metal-edge filters are suitable for all applications
a contamination indicator.
. Features Contamination Indicators Filter elements are economically used only if their dirt holding capacity is fully exploited. This is achieved by using filter housingswith a contamination indicator.
Automatic filter AF 112 G
Automatic filter AF 112 G Cast design with internal pressure cleaning and integrated cyclone effect Connection size: flange DN 40 or G1 1/2 1 Short description MAHLE automatic backflush filters are suitable
Automatic filter AF 172 G
Automatic filter AF 172 G with external pressure cleaning and integrated cyclone effect Connection sizes: DN 40/G1 1/2, cast design 1. Short description MAHLE automatic backflush filters are suitable for
Automatic filter AF 113 G
Automatic filter AF 113 G Cast design with internal pressure cleaning and integrated cyclone effect Connection sizes: G2, screw in flange DN 50 and DN 65 1 Short description MAHLE automatic backflush filters
Air Filter Systems Series 7000
Air Filter Systems Series 7000 volume flow 4.5 to m³/min. Features High performance air filter series for tractors, commercial vehicles, construction machines and compressors Flexible mounting possibilities
Breathing and air bleed filter, water-absorbing. Type BFSK. Contents. Features. RE Edition: Replaces: 51412
Breathing and air bleed filter, water-absorbing Type BFSK RE 51456 Edition: 05.13 Replaces: 51412 Size 25 to 125 Component series 2X Maximum operating pressure 1 bar [14.5 psi] Maximum flow: 1500 l/min
Filter module AF Features. MAHLE Industrialfiltration is now Filtration Group. For more information, visit
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Filter module AF 43 Nominal pressure 16 bar, nominal temperature 180 C; nominal width DN 80 to DN
L L L L Connection up to M60 x 2 Nominal flow rate up to 850 l/min
Ventilating Filters L1.0406 L1.0506 L1.0706 L1.0807 Connection up to M60 x 2 Nominal flow rate up to 850 l/min Description pplication Ventilation of tanks for hydraulic and lubrication systems and gearboxes.
Return line and Suction Boost Filter RKM
Return line and Suction Boost Filter up to 850 l/min, up to 10 bar 80 100 120 151 201 251 201/-TH 300 350 400 800 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
Filtrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
Vent and bleed filter, water-absorbing. Type BFSK 25 to 125. Contents. Features. RE Edition: Replaces: 05.13
Vent and bleed filter, water-absorbing Type BFSK 25 to 125 RE 51456 Edition: 2014-11 Replaces: 05.13 Sizes 25 to 125 Component series 2X Maximum operating pressure 1 bar [14.5 psi] Connection G 3/8 to
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
STRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS
STRONG IN THE WIND GREATER SAFETY AND EFFICIENCY FILTER SYSTEMS FOR WIND POWER SYSTEMS SYSTEMS PARTNER FOR FILTRATION IN WIND POWER SAFE AND Pitch system Azimuth drive Brake system Gearbox 1 3 4 5 2 6
Oil Mist Separator Unit LGA 1200 FU/FUW
MAHLE Industrialfiltration is now Filtration Group For more information, visit wwwfiltrationgroupcom Oil Mist Separator Unit LGA 1200 FU/FUW Nominal volume flow 1200 m³/h 1 Features High performance oil
MAHLE Industrial Filters. Dust Filter Equipment
MAHLE Industrial Filters Dust Filter Equipment Pioneering systems, modules and components of the highest precision and quality for engines and vehicles as well as for industrial applications that s what
Type 10TDN0040 to 1000; 10TD2000 and 2500
Duplex tank mounted return line filter, with filter element according to DIN 24550 Type 10TDN0040 to 1000; 10TD2000 and 2500 RE 51454 Edition: 2014-06 Replaces: 04.14 Size according to DIN 24550: 0040
Block mounting filter, lateral flange-mounting possible
Block mounting filter, lateral flange-mounting possible RE 0/.0 Replaces: 0.09 / Types 0/0 FEN 000 to 000; 0/0 FE 000, 00, 008 Nominal sizes according to DIN 0: 000 to 000 Nominal sizes according to BRFS:
MANN+HUMMEL IQORON The new compact air cleaner for high requirements
MANN+HUMMEL IQORON The new compact air cleaner for high requirements IQORON : An intelligent solution The newly developed IQORON air cleaner series from MANN+HUMMEL meets current and future requirements
Line filter with filter element according to DIN 24550
Line filter with filter element according to DIN 2455 RE 51423/9.12 Replaces: 7.1 1/2 Type 445LEN4 to 1 Size according to DIN 2455: 4 to 1 Nominal pressure: 45 bar [6527 psi] Connection up to G 1 1/2;
UD and UC Gear pump unit
1-19-EN for SKF CircOil or hydraulic lubrication systems General Information The UC and UD gear pump units are vertically or horizontally arranged units that are used in hydraulic or circulating-oil lubrication
AIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series ACCESSORIES HYDRAULIC SYMBOL
ACCESSORIES AIR FILTERS AND FILLER BREATHERS FA3 / FB1 / FB2 / FT series The air breather filters are integral part of the filtration within the hydraulic system, as they retain the environment contamination
3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
Line filter. Features. RE 51400/01.09 Replaces: Types 40/100 LEN 0040 to 0400; 40/100 LE 0003, 0015, 0018
Line filter RE /.9 Replaces: 8.8 / Types / LEN to ; / LE,, 8 Nominal sizes according to DIN : to Nominal sizes according to BRFS:,, 8 Nominal pressures, bar Connections up to G / Operating temperature
Inline filter with filter element according to DIN Type 350LEN0040 to 1000; 350LE0130, 0150
Inline filter with filter element according to DIN 24550 Type 350LEN0040 to 1000; 350LE0130, 0150 RE 51422 Edition: 2015-03 Replaces: 07.11 Size as per DIN 24550: 0040 to 1000 Other sizes: 0130, 0150 Nominal
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The
Block mounting filter, for lateral flange-mounting
Block mounting filter, for lateral flange-mounting RE 51418/12.1 Replaces: 1.1 1/18 Type 245PSFN4 to 4; 245PSF13, 15 Size according to DIN 2455: 4 to 4 Additional sizes: 13, 15 Nominal pressure 25 bar
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11
Air Cooler Industry AC-LN 8-14 / ACA-LN 8-11 / ACAF-LN 8-11 Symbol General The AC-LN 8-14 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers
Inline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51421/07.11 Replaces: 12.10 1/16 Type 245LEN0040 to 400; 245LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130, 0150
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 210 270 330 500 600 661 851 1. TECHNiCAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
General Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
OIL FILLER AND AIR BREATHER FILLER CAPS
OIL FILLER ND IR RETHER FILLER CPS The complete series of oil filter and makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. s perform
PRESSURE FILTER Series HPV DN 25 PN 420
PRESSURE FILTER Series HPV 60-150 DN 25 PN 420 Sheet No. 1478 E 1. Type index: 1.1. Complete filter: (ordering example) HPV. 90. 10VG. HR. E. P. -. G. 5. -. D2. AE 1 2 3 4 5 6 7 8 9 10 11 12 HPV = pressure
Inline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51422/07.11 Replaces: 12.10 1/18 Type 350LEN0040 to 1000; 350LE0130, 0150 Size according to DIN 24550: 0040 to 1000 Additional sizes: 0130, 0150
Block mounting filter, for lateral flange-mounting
Block mounting filter, for lateral flange-mounting RE 51419/2.1 1/18 Type 35PSFN4 to 1; 35PSF13, 15 Size according to DIN 2455: 4 to 1 Additional sizes: 13, 15 Nominal pressure 35 bar [579 psi] Port up
Differential pressure switches for air, flue and exhaust gases Pressure switch for gas
es for air, flue and exhaust gases Pressure for gas /2 5.08 Printed in Germany Edition 02.18 Nr. 223 839 1 6 Technical description The differential LGW A4 is an adjustable differential as per EN 1854 for
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T ) Buna-N (FKM on request)
HYDRAULIC FILTRATION Return filters, tank top mounting, inside-to-outside filtration Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.10.5.1) Burst 16 bar (232 psi) (acc. to
Return Line Filter RFM with 4-Hole Mounting
Return Line Filter with 4-Hole Mounting Tank-top mounted versions: up to 850 l/min, up to 10 bar 75 90 150 165 185 195 210 270 330 500 600 661 851 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction
Inline filter with filter element according to Bosch Rexroth standard. Type 16 FE Features. Contents
Inline filter with filter element according to Bosch Rexroth standard Type 16 FE 2500... 7500 RE 51403 Edition: 2014-11 Replaces: 01.09 Sizes according to according to Bosch Rexroth standard: 2500... 7500
Process Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
Block mounting filter, for vertical flange-mounting
Block mounting filter, for vertical flange-mounting RE 51417/12.1 Replaces: 7.1 1/18 Type 45PBFN4 to 1; 45PBF13, 15 Size according to DIN 2455: 4 to 1 Additional sizes: 13, 15 Nominal pressure 45 bar [653
Pressure: Max working 8 bar (116 psi) (acc. to NFPA T ) Burst 16 bar (232 psi) (acc. to NFPA T )
HYDRAULIC FILTRATION Tank top return filters Technical Information Pressure: Max working 8 bar (116 psi) (acc. to NFPA T 3.1..1) Burst 16 bar (232 psi) (acc. to NFPA T 3.1..1) Housing Connection Ports:
Inline filter with filter element according to DIN 24550
Inline filter with filter element according to DIN 24550 RE 51448/06.11 Replaces: RE 51400 1/18 Type 110LEN0040 to 0400; 110LE0130, 0150 Size according to DIN 24550: 0040 to 0400 Additional sizes: 0130,