DEUTSCHE NORM July 1998
|
|
- Hollie Ilene Skinner
- 6 years ago
- Views:
Transcription
1 DEUTSCHE NORM July 1998 Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings English version of DIN EN { EN ICS ; Descriptors: Forgings, steel, non-destructive testing. Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl Teil 3: Ultraschallprüfung von Schmiedestücken aus ferritischem oder martensitischem Stahl European Standard has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by ECISS/TC 28. The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl (Iron and Steel Standards Committee), Technical Committee Schmiedestücke. Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52 No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, D Berlin, has the exclusive right of sale for German Standards (DIN-Normen). EN comprises 19 pages. Ref. No. DIN -07 English price group 11 Sales No
2
3 EN May 1998 ICS ; Descriptors: Forgings, steel, non-destructive testing. English version Non-destructive testing of steel forgings Part 3: Ultrasonic testing of ferritic or martensitic steel forgings Essais non destructifs des pièces forgées en acier Partie 3: Contrôle par ultrasons des pièces forgées en aciers ferritiques et martensitiques Zerstörungsfreie Prüfung von Schmiedestücken aus Stahl Teil 3: Ultraschallprüfung von Schmiedestücken aus ferritischem oder martensitischem Stahl Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52 This European Standard was approved by CEN on CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom. ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. E
4 Page Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52 19
5 Page 3
6 Page 4
7 Page 5
8 Page 6
9 Page 7
10 Page 8
11 Page 9
12 Page 10
13 Page 11
14 Page 12 Amplitude Amplitude Range Probe position Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52
15 Page 13 Amplitude Amplitude Range Probe position Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52
16 Page 14
17 Page 15
18 Page 16
19 Page 17
20 Page 18 Beam path range D Maximum testable depth M Probe angle X Reflector Outside radius R Normen-Download-Beuth-CDP BHARAT FORGE GmbH-KdNr LfNr :52
21 Page 19
DEUTSCHE NORM January 2004 DIN EN {
DEUTSCHE NORM January 2004 DIN EN 13698-1 { ICS 55.180.20 Supersedes DIN 15146-2, November 1986 edition. Pallet production specification Part 1: Construction specification for 800 mm 1200 mm flat wooden
More informationDEUTSCHE NORM October Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887
DEUTSCHE NORM October 2003 Steels Determination of depth of decarburization (ISO 3887 : 2003) English version of DIN EN ISO 3887 { EN ISO 3887 ICS 77.040.99 Stahl Bestimmung der Entkohlungstiefe (ISO 3887
More informationDEUTSCHE NORM October Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN
DEUTSCHE NORM October 1998 Structural steel equal and unequal leg angles Part 1: Dimensions English version of DIN EN 10056-1 { EN 10056-1 ICS 77.140.70 Descriptors: Structural steel, angles, dimensions.
More informationDEUTSCHE NORM June Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO : 2001)
DEUTSCHE NORM June 2002 Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics (ISO 1043-1 : 2001) English version of DIN EN ISO 1043-1 { EN ISO 1043-1 ICS 01.040.83;
More informationDEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
More informationDEUTSCHE NORM January Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042
DEUTSCHE NORM January 2001 Fasteners Electroplated coatings (ISO 4042 : 1999) English version of DIN EN ISO 4042 { EN ISO 4042 ICS 21.060.01; 25.220.40 Verbindungselemente Galvanische Überzüge (ISO 4042
More informationPart 1: Specifications for pipes, fittings and the system English version of DIN EN
DEUTSCHE NORM December 1999 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications
More informationDEUTSCHE NORM February 2005 DIN EN ISO 1514 { Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514
DEUTSCHE NORM February 2005 DIN EN ISO 1514 { ICS 87.100 Supersedes September 1997 edition. Paints and varnishes Standard panels for testing (ISO 1514 : 2004) English version of DIN EN ISO 1514 Beschichtungsstoffe
More informationSteel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN
DEUTSCHE NORM February 2000 Steel forgings for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels English version of DIN EN 10222-5 { EN 10222-5 ICS 23.020,30; 77.140.80;
More informationDEUTSCHE NORM March Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016
DEUTSCHE NORM March 2001 Hexagon head bolts Product grade C (ISO 4016 : 1999) English version of DIN EN ISO 4016 { EN ISO 4016 ICS 21.060.10 Sechskantschrauben mit Schaft Produktklasse C (ISO 4016 : 1999)
More informationDEUTSCHE NORM June 2002
DEUTSCHE NORM June 2002 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories Part 1: Steel flanges, PN designated English version of DIN EN 1092-1 { EN 1092-1 ICS 23.040.60
More informationDEUTSCHE NORM May 2004 DIN EN ISO 4029 { Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029
DEUTSCHE NORM May 2004 DIN EN ISO 4029 { ICS 21.060.10 Supersedes DIN 916, December 1980 edition. Hexagon socket set screws with cup point (ISO 4029 : 2003) English version of DIN EN ISO 4029 Gewindestifte
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10246-8:2000 Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
More informationDEUTSCHE NORM February 2003
DEUTSCHE NORM February 2003 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylenediene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)- styrene (ACS) moulding and extrusion
More informationDEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12591:2000 Bitumen and bituminous binders - Specifications for paving grade bitumens Bitumen and bituminous binders - Specifications for paving grade bitumens EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12514-1:2000 Installations for oil supply systems for oil burners - Part 1: Safety requirements and tests - Parts, oil feed pumps, control and safety devices, supply tanks Installations
More informationCOLD ROLLED STEEL SECTIONS -
STANDARD I.S. EN 10162:2003 ICS 77.140.70 National Standards Authority of Ireland Dublin 9 Ireland COLD ROLLED STEEL SECTIONS - Tel: (01) 807 3800 Fax: (01) 807 3838 TECHNICAL DELIVERY CONDITIONS - DIMENSIONAL
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12712:2000 Plastics jerricans - Jerricans with a nominal capacity of 20 l to 60 l for optimal utilisation of pallet sizes 800 x 1200, 1000 x 1200 and 1140 x 1140 mm Plastics jerricans
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
More informationProvläsningsexemplar / Preview
Provläsningsexemplar / Preview EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 14975:2006+A1 July 2010 ICS 91.060.30 Supersedes EN 14975:2006 English Version Loft ladders - Requirements, marking
More informationSteel wire ropes - Terminations for steel wire ropes Safety - Metal and resin socketing
Draft SI part 34 34 October 2011 2011 ICS CODE ###### Steel wire ropes Terminations for steel wire ropes Safety Metal and resin socketing The Standards Institution of Israel 24/10/11 #### wwwsiiorgil 036412762
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 805:2000 Water supply - Requirements for systems and components outside buildings Water supply - Requirements for systems and components outside buildings EESTI STANDARDIKESKUS EESTI
More informationWATER-TUBE BOILERS AND AUXILIARY
IRISH STANDARD I.S. EN 12952-12:2003 ICS 13.060.25 27.040 WATER-TUBE BOILERS AND AUXILIARY National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 INSTALLATIONS -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 303-4:2001 Heating boilers. Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kw and a maximum
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12723:2000 Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units Liquid pumps - General terms for pumps and installations -
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
More informationEurocode 2 Design of concrete structures
BRITISH STANDARD BS EN 1992-3:2006 Eurocode 2 Design of concrete structures Part 3: Liquid retaining and containment structures The European Standard EN 1992-3:2006 has the status of a British Standard
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 2566-1 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-06-30 1 1 (1+30) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationRESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST IRISH STANDARD I.S. EN 425:2002. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 425:2002 ICS 97.150 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 RESILIENT AND LAMINATE FLOOR COVERINGS - CASTOR CHAIR TEST NSAI
More informationEurocode 8: Design of structures for earthquake resistance
BRITISH STANDARD BS EN 1998-4:2006 Eurocode 8: Design of structures for earthquake resistance Part 4: Silos, tanks and pipelines The European Standard EN 1998-4:2006 has the status of a British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 867-5:2002 Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-2:2006 Eurocode 3 Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys ICS 91.010.30; 91.060.40; 91.080.10 National foreword This British Standard is the
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1772:2000 Surface active agents - Determination of wetting power by immersion Surface active agents - Determination of wetting power by immersion (ISO 022:10, modified) EESTI STANDARDIKESKUS
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 12668-3 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-03-24 1 1 (1+11) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12934:2000 Feather and down - Composition labelling of processed feathers and down for use as sole filling Feather and down - Composition labelling of processed feathers and down
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1092-4:2002 Äärikud ja nende ühendused. Ringäärikud torudele, ventiilidele, ühendusdetailidele ja abiseadmetele, PN määratud. Osa 4: Alumiiniumsulamist äärikud Flanges and their joints
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6245:2003 Naftasaadused. Tuha määramine Petroleum products - Determination of ash EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
More informationCold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering
EESTI STANDARD EVS-EN 10132-3:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationSVENSK STANDARD SS-EN Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil
SVENSK STANDARD SS-EN 10306 Fastställd 2002-01-18 Utgåva 1 Järn och stål Ultraljudprovning av H-profil med parallella flänsar samt IPE-profil Iron and steel Ultrasonic testing of H beams with parallel
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1272:2002 Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A Devices to prevent pollution by
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 867-4:2001 Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels EESTI STANDARDIKESKUS EESTI
More informationDEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-5:2007 Incorporating corrigendum May 2009 Eurocode 3 Design of steel structures Part 5: Piling ICS 91.010.30; 91.080.10 National foreword This British Standard is the UK implementation
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-3-1:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 3-1: Towers, masts and chimneys Towers and masts ICS 91.010.30; 91.080.10 National foreword
More informationGasflaskor Fyllningsförhållanden för batterifordon för acetylen
SVENSK STANDARD SS-EN 13720 Fastställd 2003-03-28 Utgåva 1 Gasflaskor Fyllningsförhållanden för batterifordon för acetylen Transportable gas cylinders Filling conditions for acetylene battery vehicles
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12309-2:2000 Gaasiküttega absorptsiooni ning absorptsiooni kliima- ja/või soojuspumbaseadmed, mille kasulik soojuskoormus ei ületa 70 kw. Osa 2: Energia ratsionaalne kasutamine Gas-fired
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 6974-3:2002 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 116:2000 Diislikütused ja kodumajapidamises kasutatavad kütteõlid. Külma filtri ummistumispunkti määramine Diesel and domestic heating fuels - Determination of cold filter plugging
More informationSVENSK STANDARD SS-EN Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning
SVENSK STANDARD SS-EN 13385 Fastställd 2002-04-19 Utgåva 1 Gasflaskor Batterifordon för komprimerade och kondenserade gaser (exklusive acetylen) Kontroll vid fyllning Transportable gas cylinders Battery
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection Petroleum products - Test method for free water in liquefied petroleum gas
More informationSVENSK STANDARD SS-EN ISO 9875
SVENSK STANDARD SS-EN ISO 9875 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1997-09-05 2 1(1+15) SIS FASTSTÄLLER OCH UTGER SVENSK STANDARD SAMT SÄLJER NATIONELLA, EUROPEISKA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1597-2:1999 Keevitusmaterjalid. Katsemeetodid. Osa 2: Kontroll-liidete ettevalmistamine terasest ühe ja kahe läbimiga keevitatud katsekehadele Welding consumables - Test methods -
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation Bitumen and bituminous binders - Determination of the paraffin
More informationINDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS IRISH STANDARD I.S.
IRISH STANDARD I.S. EN 12567:2000 ICS 23.060.01 National Standards Authority of Ireland Dublin 9 Ireland INDUSTRIAL VALVES - ISOLATING VALVES Tel: (01) 807 3800 Tel: (01) 807 3838 FOR LNG - SPECIFICATION
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method Ethanol as a blending component for petrol - Determination
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10219-2:2006 Külmsurvevormitud keevitatud konstruktsiooni-õõnesprofiilid mittelegeerja peeneteraterastest. Osa 2: Tolerantsid, mõõtmed ja profiili omadused Cold formed welded structural
More informationEurocode 1 Actions on structures
BRITISH STANDARD Eurocode 1 Actions on structures BS EN 1991-1-3:2003 Incorporating corrigenda December 2004 and March 2009 Part 1-3: General actions Snow loads ICS 91.010.30 National foreword This British
More informationContinuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
Irish Standard Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape NSAI 2010 No copying without NSAI permission except as
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13535:2001 Fertilizers and liming materials - Classification Fertilizers and liming materials - Classification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 11446:2004 Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation Passenger
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 3451-1 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1997-09-26 1 1(1+5) SIS FASTSTÄLLER OCH UTGER SVENSK STANDARD SAMT SÄLJER NATIONELLA, EUROPEISKA
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 171-:2000 Alumiinium ja alumiiniumisulamid. Tõmbetoorikud. Osa : Erinõuded mehaanika alal kasutamiseks (välja arvatud keevitamine) Aluminium and aluminium alloys - Drawing stock -
More informationFlödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997)
SVENSK STANDARD SS-EN ISO 10628 Fastställd 2003-04-04 Utgåva 1 Flödesscheman för processanläggningar Generella regler (ISO 10628:1997) Flow diagrams for process plants General rules (ISO 10628:1997) ICS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14895:2006 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders Bitumen and bituminous binders - Stabilisation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12255-6:2002 Wastewater treatment plants - Part 6: Activated sludge processes Wastewater treatment plants - Part 6: Activated sludge processes EESTI STANDARDIKESKUS EESTI STANDARDI
More informationSVENSK STANDARD SS-EN Armering Specifikation för textila glasrovings Del 1: Beteckning
SVENSK STANDARD SS-EN 14020-1 Fastställd 2002-12-20 Utgåva 1 Armering Specifikation för textila glasrovings Del 1: Beteckning Reinforcements Specification for textile glass rovings Part 1: Designation
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12900:2005 Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data Refrigerant compressors - Rating conditions, tolerances and
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1550:1999 Tööpinkide ohutus. Töödeldava eseme kinnitusrakiste projekteerimise ja ehitamise ohutusnõuded Machine-tools safety - Safety requirements for the design and construction
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14264:2003 Derivatives from coal pyrolysis - Coal tar and pitch based binders and related products: impregnating pitch - Characteristics and test methods Derivatives from coal pyrolysis
More informationSkyddshandskar mot kemikalier och mikroorganismer
SVENSK STANDARD SS-EN 374-1:2004 Fastställd 2004-01-23 Utgåva 2 Skyddshandskar mot kemikalier och mikroorganismer Del 1: Terminologi och fordringar på prestanda Protective gloves against chemicals and
More informationSVENSK STANDARD SS-EN ISO
SVENSK STANDARD SS-EN ISO 8434-4 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-06-09 1 1 (1+30) Copyright SIS. Reproduction in any form without permission is prohibited.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1232:1999 Töökeskkonna õhu kvaliteet. Pumbad keemiliste toimeainete individuaalseks proovivõtmiseks. Nõuded ja katsemeetodid Workplace atmospheres - Pumps for personal sampling of
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12284:2003 Külmetussüsteemid ja soojuspumbad. Ventiilid. Nõuded, testimine ja markeerimine Refrigerating systems and heat pumps - Valves - Requirements, testing and marking EESTI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 840-1:2004 Teisaldatavad heitmekonteinerid. Osa 1: Kaherattalised konteinerid mahuga kuni 400 l, tõstmiseks kammtõsteseadistega, mõõtmed ja konstrueerimine Mobile waste containers
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 1983:2006 Tööstuslikud ventiilid. Terasest kuulklapid Industrial valves - Steel ball valves EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15520:2007 Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings Thermal spraying - Recommendations for constructional design
More informationSVENSK STANDARD SS-EN 14263:2004. Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck
SVENSK STANDARD SS-EN 14263:2004 Fastställd 2004-10-22 Utgåva 1 Derivat från kolpyrolys Tjära och beckbaserade bindemedel och relaterade produkter: Kolbindningsbeck Egenskaper och testmetoder Derivatives
More informationPlastics Polyoxymethylene (POM) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO :2004)
SVENSK STANDARD SS-EN ISO 9988-1:2006 Fastställd 2006-04-12 Utgåva 1 Plast Sprutmassor av polyoxymetylen (POM) Del 1: Beteckningssystem och specifikationsgrund (ISO 9988-1:2004) Plastics Polyoxymethylene
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12689:1999 Biotehnoloogia. Juhised mikroorganismidel baseeruvate toodete puhtuse, bioloogilise aktiivsuse ja stabiilsuse hindamiseks Biotechnology - Guidance on assessment of the
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 828:2000 Liimid. Märgavus. Tahke aluspinna kontaktnurga mõõtmine ja kriitilise pindpinevuse määramine Adhesives - Wettability - Determination by measurement of contact angle and critical
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13594:2002 Kaitsekindad professionaalsete mootorratturitele. Nõuded ja katsemeetodid Protective gloves for professional motorcycle riders - Requirements and test methods EESTI STANDARDIKESKUS
More informationSVENSK STANDARD SS-EN ISO 868
SVENSK STANDARD SS-EN ISO 868 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1998-03-06 1 1 (1+6) SIS FASTSTÄLLER OCH UTGER SVENSK STANDARD SAMT SÄLJER NATIONELLA, EUROPEISKA
More informationCHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF VIRUCIDAL ACTIVITY AGAINST BACTERIOPHAGES OF
IRISH STANDARD I.S. EN 13610:2003 ICS 11.080.20 67.050 71.100.35 CHEMICAL DISINFECTANTS - QUANTITATIVE SUSPENSION TEST FOR National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel:
More informationSVENSK STANDARD SS-EN Oförstörande provning Ultraljudprovning Del 4: Undersökning av fel vinkelräta mot ytan
SVENSK STANDARD SS-EN 583-4 Fastställd 2002-09-13 Utgåva 1 Oförstörande provning Ultraljudprovning Del 4: Undersökning av fel vinkelräta mot ytan Non-destructive testing Ultrasonic examination Part 4:
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14620-3:2006 Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14432:2006 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves Tanks for the transport of dangerous
More informationUtrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder. Roller sports equipment Inline-skates Safety requirements and test methods
SVENSK STANDARD SS-EN 13843 Fastställd 2003-02-21 Utgåva 1 Utrustning för hjulsport Inlines Säkerhetskrav och provningsmetoder Roller sports equipment Inline-skates Safety requirements and test methods
More informationMETALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code
IRISH STANDARD I.S. EN ISO 18265:2003 ICS 77.040.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 12014-5:2000 Toiduained. Nitraadi- ja/või nitritisisalduse määramine. Osa 5: Ensümaatiline nitraadisisalduse määramine köögivilja sisaldavas imikuja väikelastetoidus Foodstuffs -
More informationStructural steel equal and unequal leg
BRITISH STANDARD BS EN 10056-1:1999 The European Standard has the status of a British Standard ICS 77.140.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Structural steel equal
More information