Sealing and Isolating Gaskets Flange Isolation Kits Isolation Sleeves and Washers
|
|
- Stephanie Booth
- 6 years ago
- Views:
Transcription
1 Sealing and Isolating Gaskets Flange Isolation Kits Isolation Sleeves and Washers
2 Page 2 For over 35 years Pipeline Seal and Insulator, Inc. has been a technology leader in the field of high quality sealing and isolating products used to guarantee the safe flow of fluids passing through pipeline transmission, distribution and process piping systems. An installed base of thousands upon thousands of gaskets and flange isolation kits, effectively sealing and maintaining the integrity of corrosion mitigation programs everywhere, confirms the effectiveness and reliability of the PSI system. In fact, PSI flange isolation products are relied upon for applications subject to the most severe conditions (both internal and environmental), for specialized or exotic fluids or for applications subject to extreme temperature and pressure fluctuations. Flange isolation products include a wide selection of isolating/sealing gaskets along with a variety of sleeves and washers. For maximum flexibility, components may be ordered separately or as part of complete flange isolation kits. Manufacturing facilities are located in the United States and Europe, with sales and service facilities located worldwide. All PSI facilities are ISO 9002 certified with extensive quality control procedures to insure total compliance with product performance and reliability standards. Additions to the PSI line of flange isolation products are the LineBacker Zero TM sealing gasket, LineBacker 250 TM sealing gasket and LineBacker 251 TM sealing gasket, all designed to address problems associated with asbestos substitutes and fugitive emissions. This catalog includes suggested flange isolation material compatibility charts as well as technical specifications and an ordering/work sheet.
3 PSI Isolating Gasket Types and Styles Type E Gaskets Type E Gaskets extend to the outside diameter of the flange. They feature precision located bolt holes, to automatically center the gasket, and offer maximum protection against foreign material shorting-out the flange. Type E gaskets may be ordered in any one of the following configurations: LineBacker Sealing Gaskets GasketSeal Sealing Gaskets Neoprene Faced Phenolic Gaskets Plain Phenolic Gaskets Red Devil Gaskets Yellow Jacket Gaskets Garlock Gaskets Teflon Gaskets When configured as a LineBacker Sealing Gasket, the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the bolt circle. Type F Gaskets Type F Gaskets are made to fit within the bolt hole circle of the flange. The O.D. of the gasket extends out to the I.D. of the bolt hole circle for good protection against foreign material shorting-out the flange. When configured as a LineBacker Sealing Gasket, the sealing element may be positioned anythere between the I.D. and O.D. of the gasket. Type F gaskets may be ordered in any one of the following configurations: LineBacker Sealing Gaskets GasketSeal Sealing Gaskets Neoprene Faced Phenolic Gaskets Plain Phenolic Gaskets Red Devil Gaskets Yellow Jacket Gaskets Garlock Gaskets Teflon Gaskets When configured as a LineBacker Sealing Gasket, the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the bolt circle. Type D Gaskets Type D Gaskets are available for RTJ flanges but the LineBacker Sealing Gasket is an excellent alternative to D gaskets because the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the ring groove. Teflon is a registered trademark of DuPont Dow Elastomer. Page 3
4 PSI Isolating Gaskets - Standard 1/8 Thick GasketSeal Sealing Gaskets GasketSeal sealing gaskets are considered one of the most effective methods for sealing and isolating flanges of all types. The gasket consists of two molded semi O rings (with precise crown to void ratio) mounted in grooves on opposite sides of an isolating retainer. While maintaining all the advantages of a full O ring seal, the semi O ring seal eliminates the need for a sealing groove in the flange face to reduce problems associated with alignment. GasketSeal sealing gaskets incorporate near zero m and y factors that make it possible to effect a positive seal without tremendous bolt loads required with flat gaskets. GasketSeal sealing gaskets are available in a wide variety of retainer and sealing element combinations for matching gaskets to service and environmental conditions. Refer to the chart for the GasketSeal sealing gasket temperature ranges and material compatibilities. LineBacker Sealing Gaskets Neoprene Faced Phenolic Gaskets LineBacker sealing gaskets utilize a patented rectangular sealing element, referred to as a quad ring, in combination with a unique groove design to effectively seal and isolate flanges of all types. With the unique quad ring design, elastic memory is provided for elastomers not normally associated with this characteristic. Materials such as polyimide, TFE (Teflon) and vinyl may therefore be used as sealing elements which dramatically increases the options available for matching gasket materials to service and environmental conditions. This greater variety of materials also provides excellent termperature and chemical range compatability. LineBacker sealing gaskets incorporate near zero m and y factors that make it possible to effect a positive seal without tremendous bolt loads that are required with flat gaskets. Refer to chart for LineBacker sealing gasket temperature range and material compatibilities. Neoprene Faced Phenolic gaskets have been used as standard flat isolating gaskets in the oil and gas industries for many years. Soft neoprene rubber sheets are factory applied to both sides of a laminated phenolic retainer providing an effective sealing surface. The temperature limit of these gaskets is approximately +175º F. (80º C.). Note: Due to improved sealing characteristics and retainer/seal element options, LineBacker or GasketSeal sealing gaskets should be considered in lieu of neoprene faced phenolic gaskets whenever possible. Page 4 Flat Gaskets Flat gaskets are used in special applications such as elevated temperatures that often require materials such as Red Devil or Yellow Jacket. Please contact a PSI representative for additional information on available options.
5 Suggested Flange Isolation Material Compatibility Medium Retainer Seal Sleeve Washer Temp. Range F Temp. Range C Acetone Phenolic EPDM Mylar Phenolic +32 to to +27 Air G-10 Nitrile Mylar Phenolic -65 to to +107 Ammonia Dry G-10 Teflon Mylar G to to +104 Ammonia (Wet)*** G-10 Teflon Mylar G to to +38 Bleach G-10 Teflon Mylar G to to +27 Butylene (Butidiene) G-10 Teflon G-10 G to to +38 Carbon Dioxide G-10 Nitrile Mylar G to to +66 Caustic Soda (NaOH) G-10 Teflon Mylar G to to +107 Cryogenic G-10 Teflon G-10 G to to +138 Ethanol G-10 Nitrile Mylar G to to +38 Ethylene (Ethene) G-10 Teflon G-10 G to to +27 Fuel Oil G-10 Viton Mylar G to to +138 Gas, Natural Phenolic Nitrile Mylar Phenolic -65 to to +104 Gas, Sour Phenolic Viton Mylar Phenolic -20 to to +104 Gasoline G-10 Teflon Mylar G to to +107 Hydrogen G-10 Nitrile Mylar G to to +121 Jet Fuel G-10 Viton Mylar G to to +107 LNG G-11 Teflon G-10 G to to +38 Mercaptan G-10 Teflon G-10 G to to +27 Methanol G-10 Teflon Mylar G to to +38 MTBE G-10 Special Nitrile G-10 G to to +27 Nitrogen Phenolic Nitrile Mylar Phenolic -65 to to +104 Oil, Crude G-10 Viton Mylar G to to +138 Oxygen** G-10 Teflon G-10 G to to +121 Pentane G-10 Teflon G-10 G to to +27 Propane G-10 Nitrile or Teflon G-10 G to to +27 Propylene G-10 Viton G-10 G to to +27 Sewage G-10 Viton Mylar G to to +138 Spent Liquor G-10 Teflon G-10 G to to +38 Steam* G-7* Teflon Nomex G-7* To +450 To +232 Steam G-3 Teflon Nomex G-3 To +392 to +200 Steam* Yellow Jacket No Seal Nomex G-7* or (G-3) to +450* or (+392) to +268* or (+200) Styrene G-10 Teflon G-10 G to to +27 Sulphur (Molten) G-10 Teflon G-10 G to to +138 Tolulene G-10 Viton or Teflon G-10 G to to +66 Water (hot) G-10 Nitrile Mylar G to to +121 Water (Potable) G-10 Nitrile Mylar G-10 or Phenolic +32 to to +121 Water (Sea) G-10 Nitrile Mylar G-10 or Phenolic +32 to to +121 White Liquor G-10 Teflon G-10 G to to +138 * = G-7 material should not be used with hydrocarbons, not even trace amounts. ** = These are organic materials that will feed a fire if a leak occurs and an ignition source exists. *** = Ammonia (wet) - Data to +100 F (+38 C) only (same materials as dry). For pipe diameters over 24 or ANSI Class pressure ratings of 600# or greater, use G-10 sleeves and G-10 washers where temperatures and other conditions permit. General Note: The foregoing performance data are intended as guidelines only. Performance suitability for any specific applications should be determined by the user. Variation in temperature, pressure, concentration or mixtures acting synergistically may preclude suggested service use. Material selection is at the sole risk of the user. Consult with a specialist or PSI factory for specific applications. PSI s responsibilities will be limited to those listed in the PSI standard warranties. Page 5
6 Sleeves and Washers Isolating Sleeves Isolating sleeves are available in the following materials: Mylar Polyethylene Phenolic Nomex G-7 Silicon Glass G-10 Epoxy Glass G-11 Epoxy Glass Designed to easily fit over standard size flange bolts within standard size bolt holes, PSI isolating sleeves have a wall thickness of 1/32 (0.79mm) and are used with separate isolating and steel washers. They are available for standard American bolt sizes from 1/2 (12.7mm) to 3-1/2 (88.9mm) as well as metric bolt sizes from 12mm and larger. Isolating Washers - Standard 1/8 Thick Isolating washers are available in the following materials: High Strength Glass Clad Phenolic G-3 High Temp. Phenolic G-7 Silicon Glass G-10 Epoxy Glass G-11 Epoxy Glass Designed to provide tough, positive isolation. PSI isolating washers are available for bolt sizes from 1/2 (12.7mm) through 3-1/2 (88.9mm) and are made to fit over the isolating sleeves. One-piece Sleeves and Washers Molded from acetal resin and available for bolt diameters from 1/2 to 1-1/2 (12.7 to 38.1mm), one-piece sleeves and washers are structurally tough but limited to applications where the flange temperature does not exceed +180ºF (+80 C) and compressive loads do not exceed 18,000 psi. They are generally used as single washer sets because they re molded to specific lengths and, in many instances, are longer than the thickness of a single flange. A washer centering ring positions the steel washer on the unit properly to avoid uneven pressures on the washers. Steel Washers Steel washers are designed to fit over the isolating sleeve or the retainer ring on the one-piece sleeves and washers. The outside diameter is sized to fit within the bolt facing on ANSI standard flanges. They are made of 1/8 (3.2mm) thick plated hot-rolled steel. Page 6
7 Sleeve Material Physical Properties ASTM Test Method D149 D695 D229 D790 Dielectric Strength Volts/Mil (Short Time) Compressive Strength psi Water Absorption % Operating Temp. F Polyethylene Silicone Epoxy Epoxy One-piece Mylar Nomex Phenolic Glass Glass Glass Sleeve & G-7* G-10 G-11 Washer ,200 N/A N/A N/A N/A N/A N/A N/A 18, N/A to to to to +225 Cryogenic Cryogenic Cryogenic -30 to +180 to +450 to +280 to +320 C -34 to to to to +107 Cryogenic Cryogenic Cryogenic -34 to +82 to +232 to +138 to +160 Flexural Strength psi 7,000 13,000 20,000 16,000 20,000 55,000 55,000 1,400 Cut Through Resistance ft-lbs. 1,800 3,500 4,000 No Test No Test 16,000 No Test 3,400 * = G-7 material should not be used with hydrocarbons, not even trace amounts. 1/8 Washer Material Physical Properties ASTM Test Method Glass Clad Hi-Temp Silicone Epoxy Epoxy One-piece Phenolic Phenolic Glass Glass Glass Sleeve & G-3 G-7* G-10 G-11 Washer D149 Dielectric Strength Volts/Mil (Short Time) ,200 D695 Compressive Strength psi 33,000 50,000 40,000 50, ,000 18,000 D229 Water Absorbtion % Operating Temp F -65 to to +392 Cryogenic Cryogenic Cryogenic -30 to +180 to +450 to +280 to +350 C -54 to to +200 Cryogenic Cryogenic Cryogenic -34 to +82 to +232 to +138 to +177 * = G-7 material should not be used with hydrocarbons, not even trace amounts. Full length sleeve, single washer set configuration Isolating Sleeve Isolating Washer Steel Washer One-piece sleeve & washer configuration Gasket One-piece Sleeve and Washer Steel Washer Gasket Page 7
8 Flange Isolation Kits Flange Isolation Kits Flange isolation kits are available for all flange sizes, types, pressure ratings and materials. Each kit is individually and securely packed in a reinforced corrugated cardboard box, which is clearly labeled as to its contents for convenience in warehousing and field use. Very large diameter gaskets are packaged separately from the sleeves and washers for convenience in storing and handling. Each gasket is labeled with: Materials (Retainer Material or Retainer/Seal Element Combination) Pipe Size ANSI Class Date of Manufacture Type Flange (Weld Neck or Slip-on) Sleeves and Washers Sleeves and washers are enclosed in a strong polyethylene bag to eliminate any possibility of loss. A chart showing the recommended sequence for tightening flange bolts is also included with each kit, as well as with each individual gasket. Common LineBacker & GasketSeal Sealing Gasket Physical Properties ASTM Test Method Plain Neo-Faced G-3 G-7* G-10 G-11 Phenolic Phenolic Hi-Temp Silicone/ Epoxy/ Epoxy/ Phenolic Glass Glass Glass D149 Dielectric Strength Volts/Mil (Short Time) D695 Compressive Strength (psi) 25,000 25,000 50,000 40,000 50,000 50,000+ D229 Water Absorbtion (%) D257 Insulation Resistance Meg Ohms 40,000 40,000 46,000 2, , ,000 D790 Flexural Strength psi 22,500 22,500 60,000 27,000 60,000 75,000+ D785 Hardness Rockwell M D256 IZOD Impact Strength Ft-Lbs/Inch D638 Tensile Strength psi 20,000 20,000 42,000 25,000 45,000 43,000 D732 Shear Strength psi 10,000 10,000 18,000 20,000 22,000 22,000 Temperature Range Cryogenic Cryogenic Cryogenic -65 to to to +392 Degrees F to +450 to +280 to +349 Temperature Range Cryogenic Cryogenic Cryogenic -54 to to to +200 Degrees C to +232 to 138 to +176 * = G-7 Material should not be used with hydrocarbons, not even trace amounts. Seal Element Temperature Limits Nitrile Viton Teflon Neoprene EPDM Degrees Farenheit -65 to to +350 Cryogenic to to to +300 Degrees Celsius -54 to to +177 Cryogenic to to to +149 Page 8 Consider both retainer and seal element temperature limits together for GasketSeal and LineBacker Sealing Gaskets.
9 Flange Isolation Kits Single Washer Set Single washer set flange isolation kits include the following items for each bolt: One - 1/8 thick steel washer One - Isolating washer One - Isolating sleeve Application Considerations In buried applications, single washer configurations may be used to allow the Cathodic Protection (CP) current to reach the nuts and bolts. If desired, nuts on the opposite side of the cathodically protected flange may be included as part of the CP system. Double Washer Set Double washer set flange isolation kits include the following components for each bolt: Two - 1/8 thick steel washers Two - Isolating washers One - Full length isolating sleeve Application Considerations Double washer configurations may be used for added protection against the possibility of shorting out the nuts and bolts. In addition, double washer sets electrically isolate the nuts and bolts from both flanges. One-Piece Sleeve and Washer Sets One-piece sleeve and washer set flange isolation kits include the following items for each bolt: Two - 1/8 thick steel washers One - One-piece Isolating sleeve Application Considerations Easier to install, one-piece sleeves also allow the inspector a visual indication of sleeve usage. Due to the relatively low compressive strength of this material, its use is not recommended for high pressure or large diameter flanges that require high torque loads. Page 9
10 Typical Specifications General/Economical Flange Isolation Kit Specification Materials for flange isolation kits on pipes containing water, aqueous fluids or natural gas (up to 221ºF, 105ºC) shall consist of the following components: Isolating and Sealing Gasket One full faced isolating and sealing gasket, LineBacker Sealing Gasket - Type E, 1/8 thick, phenolic retainer containing a precision tapered groove to accommodate the controlled compression of a nitrile quad-ring sealing element. Sealing element placement shall accommodate either flat, raised or RTJ face flanges. The quad-ring seal shall be pressure energized. The phenolic retainer shall have a 500 volts/mil dielectric strength and a minimum 25,000 psi compressive strength. The full faced flange isolating gasket shall be 1/8 less in I.D. than the I.D. of the flange in which it is installed. Full Length Bolt Isolating Sleeves One full length Mylar sleeve (extending half way into both steel washers) for each flange bolt. The Mylar shall be a 1/32 inch thick tube with a 4000 volts/mil dielectric strength and water absorption of 0.8% or less. Washers Two, 1/8 inch thick, glass clad phenolic isolating washers for each bolt. Their compressive strength shall be 33,000 psi, dielectric strength 500 volts/mil and water absorption 1.6% or less. Two, 1/8 inch thick steel washers for each bolt. The I.D. of all washers shall fit over the isolating sleeve and the steel and isolating washers shall have the same I.D. and O.D. Quality Flange isolating kits shall be manufactured at a facility that has a registered ISO 9002 Quality Management System. Submittals shall include copy of valid registration. Availability Kits shall be manufactured by Pipeline Seal and Insulator, Inc., Houston, Texas, U.S.A., Telephone: , Facsimile: , info@psipsi.com. Performance suitability and material compatibility shall be determined by the user. Top of the Line Flange Isolation Kit Specification Materials for flange isolation kits on pipes containing natural gas, oil and aqueous fluids (up to 280ºF, 138ºC) shall consist of the following components: Isolating and Sealing Gasket One full faced isolating and sealing gasket, LineBacker Sealing Gasket - Type E, 1/8 thick, G-10 retainer containing a precision tapered groove to accommodate the controlled compression of a Teflon (or Viton) quad-ring sealing element. Sealing element placement shall accommodate either flat, raised face or RTJ flanges. The quadring seal shall be pressure energized. The G-10 retainer shall have a 550 volts/mil dielectric strength and a minimum 50,000 psi compressive strength. The full faced flange isolating gasket shall be 1/8 less in I.D. than the I.D. of the flange in which it is installed. Full Length Bolt Isolating Sleeves One full length G-10 sleeve (extending half way into both steel washers) for each flange bolt. The G-10 shall be a 1/32 inch thick tube with a 400 volts/mil dielectric strength and water absorption of 0.10% or less. Washers Two, 1/8 inch thick, G-10 isolating washers for each bolt. Their compressive strength shall be 50,000 psi, dielectric strength 550 volts/mil and water absorption 0.10% or less. Two, 1/8 inch thick zinc plated, hot rolled steel washers for each bolt. The I.D. of all washers shall fit over the isolating sleeve and both the steel and isolating washers shall have a same I.D. and O.D. Quality Flange isolating kits shall be manufactured at a facility that has a registered ISO 9002 Quality Management System. Submittals shall include copy of valid registration. Availability Kits shall be manufactured by Pipeline Seal and Insulator, Inc., Houston, Texas, U.S.A., Telephone: , Facsimile: , info@psipsi.com. Performance suitability and material compatibility shall be determined by the user. Page 10
11 PSI Flange Isolation Ordering Guide/Work Sheet Quantity Nominal ANSI Gasket Gasket For GasketSeal Washers Washer Sleeve Gasket I.D. Type Pipe Size Class Type Style or LineBacker Sealing Gaskets Material Flange Specify Specify 150# E = With GS = GasketSeal Retainer Seal Element SW = Single 1 PC = 1 Piece Poly = Poly- Specify W = Weld Neck Below Below 300# Bolt Holes LB = LineBacker Phenolic Neoprene Washers Acetal ethylene Below S = Slip On 400# NP = Neoprene G-3 Nitrile Phen = Phenolic Mylar R = RTJ 600# F = Ring Faced Phenolic G-7 Viton G-3 Nomex BX = API BX 900# (No Bolt PP = Plain G-10 EPDM DW = Double G-7 Phenolic RX = API RX 1500# Holes) Phenolic G-11 Teflon (LB only) Washers G-10 G-7 O = Other 2500# RD = Red Devil G-11 G-10 Denote Specs. D = For RTJ YJ = Yellow Jacket G-11 and Table Flanges GL = Garlock TF = Teflon Quantity Nominal ANSI Gasket Gasket For GasketSeal Washers Washer Sleeve Gasket I.D. Type Pipe Size Class Type Style or LineBacker Sealing Gaskets Material Flange Retainer Seal Element For Flange Isolation Kits over 24 in addition to the above please specify: Flange I.D. Flange O.D. Flange Thickness Number of Bolts Bolt Diameter Bolt Hole Diameter Bolt Circle Diameter Sleeve Length Pipe I.D. Steel Sleeve I.D. (For Concrete Pipe) Product In Line AWWA Class & Table (Or other similar std.) Internal Lining Page 11
12 Warranty All products are warranted against failure caused by manufacturing defects for a period of one year. Any product found to be so defective and returned within one year from date of shipment will be replaced without charge. The above warranty is made in lieu of, and we disclaim, any and all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, and buyer agrees to accept the products without any such warranties. We hereby disclaim any obligation or liability for consequential damages, labor costs or any other claims or liabilities of any kind whatsoever. Pipeline Seal and Insulator, Inc Goforth Street, Houston, TX U.S.A. Telephone: Toll Free: Facsimile: info@psipsi.com Certificate No Pipeline Seal and Insulator, Inc. PSI-FIC-04/01
Sealing and Isolating Gaskets. Flange Isolation Kits. Isolation Sleeves and Washers. Specifications and Ordering Guide
Sealing and Isolating Gaskets Flange Isolation Kits Isolation Sleeves and Washers Specifications and Ordering Guide Page 2 For over 40 years Pipeline Seal and Insulator, Inc. has been a technology leader
More informationEngineered Gasket for Xtreme Critical Sealing
Engineered Gasket for Xtreme Critical Sealing Prevent future leaks and blowouts today. Sealing Gasket for Zero Fugitive Emissions & Extreme Critical Sealing Applications The LineSeal gasket uses proprietary
More informationPSI Model C or W End Seal. Link-Seal Modular Seals, when centered. Not drawn to scale. 2 Max. (0.6M) 8 Max. (2.44M) 8 Max. (2.44M) 2 Max. (0.
Casing Spacers An all non-metallic casing spacer system designed to ease carrier pipe insertion, reduce inventory costs, make installation quick and easy and last for the life of the piping system. Features
More informationFLANGE ISOLATING GASKET KITS ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM537405
FLANGE ISOLATING GASKET KITS ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM537405 FLANGE ISOLATING GASKET KITS INTRODUCTION With the economic and environmental climate of today, it is
More informationGF Piping Systems Flange Insulation
GF Piping Systems Flange Insulation 10014347_02/17 Disclaimer Information in the catalog GF Central Plastics is as diligent as possible in compiling and updating the information in its catalog. However,
More informationVCS/VCFS Prevent future leaks and blowouts
VCS/VCFS Prevent future leaks and blowouts InnovatIve engineering for corrosion protection For Zero Fugitive Emissions & Extreme Critical Sealing Applications The VCS/VCFS systems use proprietary materials
More informationFLANGE ISOLATING GASKET KITS ADVANCE TO ORDER PLEASE SPECIFY THE FOLLOWING PRODUCTS & SYSTEMS, LLC
TO ORDER PLEASE SPECIFY THE FOLLOWING Gasket Type D, E or F Flange Size and Pressure Rating Single Washer or Double Washer Sets (SW or DW) Sleeve Material Material Sealing (Nitrile, Viton or PTFE) OTHER
More informationFLANGE ISOLATING GASKET KITS. Products & Systems, INC. I S O C e r t i f i e d C o m p a n y - F M
FLANGE ISOLATING GASKET KITS Advance Products & Systems, INC. I S O - 9 0 0 1 C e r t i f i e d C o m p a n y - F M 5 3 7 4 0 5 FLANGE ISOLATING GASKET KITS Introduction With the economic and environmental
More informationMetallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines.
E X P E R I E N C E C O U N T S Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines. PSI...the respected leader in piping system technology. Time tested and proven
More informationDOUBLE ISOLATION SET SINGLE ISOLATION SET
FLANGE ISOLATING GASKET KITS Introduction With the economic and environmental climate of today, it is more important than ever to prevent leakage in your carrier system. Flanges, the most common trouble
More informationCasing Spacers. An engineered equal to stainless steel casing spacers.
Casing Spacers An engineered equal to stainless steel casing spacers. An all non-metallic casing spacer system designed to ease carrier pipe insertion, reduce inventory costs, make installation quick and
More informationGasket & Fastener Handbook. A Technical Guide To Gasketing & Bolted Flanges
Gasket & Fastener Handbook A Technical Guide To Gasketing & Bolted Flanges About Lamons Lamons is one of the largest gasket and bolt suppliers in the world, committed to quality and local service. We have
More informationCombi-Seal Flange Isolation Gaskets 4 pipes
Combi-Seal lange Isolation Gaskets 4 pipes Pipeline Accessories lange Isolating Technology 4 pipes Isolating flange gaskets 4 pipes are especially designed for: Carbon steel Stainless steel Contact Corrosion
More informationPSI FLANGE ISOLATION ACCESSORIES
PSI FLANGE ISOLATION ACCESSORIES PREVENTS CONTACT CORROSION AVAILABLE IN DIFFERENT SIZES, PRESSURE RATES AND MATERIALS ELECTRICAL ISOLATION WWW.PSI-PRODUCTS.COM 195 GENERAL INFORMATION Flange connection
More informationInnerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM
Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. ISO-9001 CERTIFIED COMPANY - FM53705 www.apsonline.com Why choose Innerlynx? offer 21 different sizes for all pipe diameters
More informationCASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
More informationO-RINGS METRIC SIZES AVAILABLE
METRIC SIZES AVAILABLE 16 97 ILLUSTRATIONS BELOW NOT TO SCALE Military Specification References Temperature Range F Drawing # Specification Static Dynamic Fluid Low High Elastomer Comments AN1295 For use
More informationType B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
More informationKleerBanD. flange protectors & RADOLID PROTECTION CAPS ADVANCE PRODUCTS & SYSTEMS. I S O C e r t I f I e d C O m pa ny - fm
Patented ADVANCE PRODUCTS & SYSTEMS KleerBanD flange protectors & RADOLID PROTECTION CAPS Radolid Bolt Protection Caps Now with VCI - patent pending* *Patent Pending only applies to Radolid Caps with VCI
More informationConley Product Bulletin
EXTRA HEAVY DUTY CONLEY BASKET STRAINERS Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Strainer Types Inline basket strainers in sizes from 1 ½ through 30 Inline Y-type
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationMetallic Casing Spacers. Coated. Stainless Steel
Table of Contents Metallic Casing Spacers Non-metallic Casing Spacers Casing End Seals Casing Spacer - General Ordering Guidelines Carrier Pipe Diameter Range Options Page 1 Carrier Pipe Insertion Length
More informationCONNECTION BULLETIN. Vogt Valves. Experience In Motion. Zero Leakage Forged Steel Check Valves Class 800. FCD VVABR /04 (Replaces CB-03)
CONNECTION BULLETIN Vogt Valves Zero Leakage Forged Steel Check Valves Class 800 FCD VVABR1003-00 10/04 (Replaces CB-03) Experience In Motion Zero Leakage, Forged Steel Check Valves: Class 800 Vogt Series
More informationCLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE SIZES 6-12 CLASS 150/900TH HORIZONTAL WITH HINGE
T-Closure catalog 8/11/03 11:51 PM Page 1 CLOSURE DIMENSIONS SIZES 6-12 CLASS 150/900TV VERTICAL WITH HINGE Size A B C D E F Weight In (DN) In (cm) In (cm) In (cm) In (cm) In (cm) In (cm) Lbs (Kg) 6 (150)
More informationSC HYDRAULIC ENGINEERING CORPORATION
Designers and Manufacturers of Hydraulic and Pneumatic Equipment SC HYDRAULIC ENGINEERING CORPORATION 1130 Columbia Street - Brea, California 92821 - USA Phone (714) 257-4800 - Fax (714) 257-4810 10 SERIES
More informationHow to Order - General Guidelines
Table of Contents Description of Icons 1 How to Order - General Guidelines 2 Lamons (IGT) Intelligent Gasket Tagging Technology 3-4 DEFENDER TM Gaskets 5-6 DEFENDER TM FS Gaskets (Fire Safe) 7-10 ISOGUARD
More informationKLEERBAND FLANGE PROTECTORS & RADOLID PROTECTION CAPS ADVANCE PRODUCTS & SYSTEMS. ISO-9001 Ce r t i f i e d Co m p a n y - FM537405
Patented ADVANCE PRODUCTS & SYSTEMS KLEERBAND FLANGE PROTECTORS & RADOLID PROTECTION CAPS Radolid Bolt Protection Caps Now with VCI - patent pending* *Patent Pending only applies to Radolid Caps with VCI
More informationFAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES
Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationStyle Flange Adapter
Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved
More informationMICROMOLD TM. PTFE Gaskets. Product Specifications. Envelope & Solid Donut Style 1, 2, 3 Sanitary
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 7.20-2 PTFE Gaskets Envelope & Solid Donut Style 1, 2, 3 Sanitary Gaskets CONTENTS Sizes of PTFE Gaskets...... Slit Envelope Gaskets
More information3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series Data Sheet 1. Product Description 3M Cold Shrink Termination Kit QT-III 7672-S-8 Series contains one silicone rubber termination
More informationCasing Spacers. ApogeeAero Roller Sizes. Roller Casing Spacers. Manufactured Exclusively. How To Order. reduced size of equipment
ApogeeAero Roller Sizes Please Indicate The Following: Other Quality Products Available: Project Reference and Location Metal Insulators Small Roller How To Order 1.000 2,000 lbs. 1,000 lbs. Model number:
More informationInnerlynx Type UL Fire Rated 3 Hour Fire Stop. ISO-9001 Certified Company - FM
Type UL Fire Rated 3 Hour Fire Stop ISO-9001 Certified Company - FM3740 www.apsonline.com What Is Innerlynx & Why Is It Used? Modular Mechanical Made from synthetic rubber & industrial strength pressure
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More information3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable Data Sheet September 2010 Description 3M Cold Shrink 3-Conductor
More informationPipe Penetrations Sealed ADVANCE PRODUCTS & SYSTEMS, INC. Innerlynx Type UL Fire Rated 3Hour Fire Stop.
Pipe Penetrations Sealed Innerlynx Type UL Fire Rated 3Hour Fire Stop ADVANCE PRODUCTS & SYSTEMS, INC. www.apsonline.com I S O - 9 0 0 1 C e r t i f i e d C o m p a n y - F M 3 7 0 Why choose Innerlynx?
More informationEMERSON. CONSIDER IT SOLVED
Orifice Plates and Plate Sealing Units EMERSON. CONSIDER IT SOLVED Manufacturing Techniques Orifice plate manufacture at Daniel is quality-controlled from selection of raw material to packaging of the
More informationMAX FLUID TEMPERATURE
Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationWorcester Controls Directional Ball Valves
Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,
More information310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve
310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve Features and Benefits Uninterrupted gasket surfaces help eliminate problems associated with seat retaining screws
More informationTable of Contents. Non-metallic Casing Spacers. Metallic Casing Spacers. Casing End Seals
Table of Contents Metallic Casing Spacers Non-metallic Casing Spacers Casing End Seals Casing Spacer - General Ordering Guidelines Carrier Pipe Diameter Range Options Page 1 Carrier Pipe Insertion Length
More informationCover Page - Butterfly Valves Ordering Information Design Features, 2 to 12 Design Features, 2 to 12 (continued)
DESCRIPTION Cover Page - Butterfly Vs Ordering Information Design Features, 2 to 2 Design Features, 2 to 2 (continued) Design Features, 2 to 2 (continued) Design Features, 4 to 4 CV Chart, 2 to 4 Torque
More informationPSI Link-Seal Modular Seals
01 General Information Technical Data Selection Guide Order Submittal Sheet Installation Instruction PSI Link-Seal Modular Seals Pipeline Accessories 5 Link-Seal Modular Seals General Information Application
More informationINSULATION KITS flange protection
INSULATION KITS flange protection Carrara S.p.a. truly believes in the modern meaning of SUPPLIER, taking active part in the creation of real value, coming from skills and flexibility, innovation and vertical
More informationF low L ine 72/73 Wafer & Lug Style Sizes 2-24
F low L ine 72/73 Wafer & Lug Style Sizes 2-24 Cartridge Seated Butterfly Valves KEY FEATURES Body One piece wafer and lugged body for strength and stability in extreme environments Wafer bodies have a
More informationBonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings
Bonstrand PSX L3, PSX L3C, PSX JF and PSX JFC Polysiloxane-phenolic Fire-resistant Fiberglass Pipe and Fittings For offshore platforms, marine and onshore service Description Bondstrand PSX JF and PSX
More informationINSTRUCTION MANUAL. HEATED FILTER PROBES GENERAL PURPOSE SERIES Model 33C. Version Perma Pure LLC Tel:
PERMA PURE INSTRUCTION MANUAL HEATED FILTER PROBES GENERAL PURPOSE SERIES Model 33C Version 4.04 Perma Pure LLC Tel: 732-244-0010 P.O. Box 2105, 8 Executive Drive Tel: 800-337-3762 (toll free US) Toms
More informationStyle 233-L & 234-L Rubber Joints
Style 33-L & 3-L Rubber Joints Style 33-L Rubber s are designed for piping systems that experience large lateral offsets due to settlement. The Style 33-L is a low profile triple arch design with a built-in
More informationMEMFlo MFTV METAL BODIED FLOW METER WITH CLEAR TOP
MEMFlo MFTV METAL BODIED FLOW METER WITH CLEAR TOP DESCRIPTION The MEMFlo MFTV Metal Bodied Flow Meters with Clear Top are simple, accurate, meters for use in a wide range of industrial liquid and gas
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationSECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
More informationcheck valves BIVCO Check Valves
BIVCO valves are considered all-purpose valves because they can be tailored in the right combination of materials for the job at hand for liquids, including acids, alkalais, formaldehyde, solvents, oils,
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationTKD SERIES 3-WAY BALL VALVES - TRUE UNION
TKD SERIES 3-WAY BALL VALVES - TRUE UNION The TKD offers a host of advanced features that set it apart from other multi-port valves. The patented seat stop carrier allows for in-line micro-adjustment of
More informationThe applicable material specifications for ductile iron and rubber gaskets apply:
72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0
More informationSERIES. Table 1: Available Materials Temperatures
PROCO 700 SERIES 1 The PROCO Series 700 ProFlex Rubber Check Valves are a cost effective way to control back pressures from sewage treatment plants, outfalls and tidal operations. They are a fully passive
More informationFlange Insulation Kits
F l a n g e I n s u l a t i o n K i t s M a n u f a c t u r e r s a n d d i s t r i b u t o r s o f s e a l i n g a n d j o i n t i n g m a t e r i a l s. T h e C o m p a n y Novus Sealing manufactures
More informationGeneral Service Gaskets and Specialty Gaskets
General Service Gaskets and Specialty Gaskets Universal FPM Gasket...2-1 Universal EPDM Gasket...2-2 EPDM Socket Fusion Ring Gasket...2-3 EPDM Fiberglass Reinforced Plastic Ducting Gasket...2-4 Gasket
More informationDeZURIK 2 20" BOS BUTTERFLY VALVES
2 20" BOS BUTTERFLY VALVES Instruction D10459 October 2013 2-20 BOS Butterfly Valves Instructions These instructions provide information about BOS Butterfly Valves. They are for use by personnel who are
More informationVentureClad Insulation Jacketing Tapes 1577 Series
VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate
More information1/2" 2" MILLCENTRIC ECCENTRIC PLUG VALVE
1/2" 2" MILLCENTRIC ECCENTRIC PLUG VALVE Overview of Valve Details - 1/2" - 2" The Milliken criteria of quality, reliability, safety and value are embodied in the Millcentric Eccentric valve, setting higher
More informationTKD Series 3-Way Automated Ball Valves Product Data Sheet. Body Material: PVC Size Range: 1/2" through 2"
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation.
More informationZ-Tech Severe Chemical Service Valves We Put Control Where You Need It.
Z-Tech Severe Chemical Service Valves We Put Control Where You Need It. Z-Tech Series Valves TABLE OF CONTENTS Ball Valves ZT 4 Series: Three Piece Flanged Ball Valve... -3 Pneumatic Actuators and Accessories...
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More information3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv
3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv Data Sheet September 2014 Description 3M Cold Shrink QT-III Silicone Rubber Termination Kits, 7640-T
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationTAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
More informationKEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationO-Rings & Circlips Catalogue
O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide
More informationAPCO ASR-400/450 SEWAGE AIR RELEASE VALVES
APCO ASR-400/450 SEWAGE AIR RELEASE VALVES Instruction D12005 December 2012 Instructions These instructions provide installation, operation and maintenance information for the APCO ASR- 400/450 Sewage
More informationFord Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More informationFLANGE. Flanges used for
FLANGE FLANGE Flanges with rating class designations 150, 300, 400, 600, 900, 1500, and 2500 in sizes NPS 1 2 through NPS 24 ASME B16.5: Pipe Flanges and Flanged Fittings (NPS 24 ) ASME B16.47: NPS 26
More information411 Steel Couplings Material Specifications
411 Steel Couplings Material Specifications Gasket Material Specifications STANDARD: Nitrile (Buna-N)-NSF 61 Compounded to produce superior storage and performance characteristics while resisting water,
More informationTri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4
RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES
More informationInternational Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
More informationCast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on.
Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on. TABLE OF CONTENTS TAB SECTION CONTENTS PAGE 0 Forward 0.1.1 1 Couplings, End Caps, Accessories and Fabricated
More information3M Cold Shrink QS-III Inline Splice Kits 15 kv 5513A, 5514A, 5515A and 5516A
3M Cold Shrink QS-III Inline Splice Kits 15 kv Data Sheet June 2014! CAUTION Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel
More informationTubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
More informationDeZURIK KUL KNIFE GATE VALVES
KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife
More informationFeatures. North & South America: Europe / Africa / Middle East: Asia Pacific:
PIG-SIG V Scraper Passage Indicator Optional mounting system available Bulletin No: 5110.003.09 Version: 11.2015 Supersedes: 5110.003.08 (03.2015) ECN: E006726 Options Available options: Flag Indicator
More informationPig Valves. Complete Solutions for Industrial Valves NEWAY VALVE
Pig Valves Pig Valves Complete Solutions for Industrial Valves NEWAY VALVE Cat.no.:E-PV-2005 Introduction 1 Quality Commitment 2 How to Order 3 4 ~ 5 Product Introduction Material Specifications Complete
More informationFabri-Valve. C67 Bi-Directional Knife Gate Valve
Fabri-Valve C67 Bi-Directional Knife Gate Valve C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal
More informationSpecialty Products. Strainers. Check Valves. Butterfly Valves
Specialty Products Strainers Check Valves Butterfly Valves Effective Date: April 1, 2013 Trademarks: Viton is a trademark of DuPont Performance Elastomers, L.L.C. Teflon is a trademark of E. I du Pont
More informationVSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve
M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of
More informationO.E.M GAUGES. For Installation and Operation Manuals Please Visit: Mid-West Instrument
O.E.M GAUGES For Installation and Operation Manuals Please Visit: www.midwestinstrument.com/literature Mid-West Instrument Product Notes: BULLETIN NO. 126-127/11 (SUPERSEDES BULLETIN NO. 126-127/00) O.E.M
More informationBRADY SAS Parc Eurocit- Bat 12 45, Ave de l Europe RONCQ Cx Tel : Fax :
Technical data for Selflaminating label B427 Order Reference: PTL-29-427 Description: TLS 2200 /TLS PC Link Labels Size - Width (mm): 12.7 Size - Height (mm): 38.1 Printable Area - Height (mm): 12.7 Printable
More information1-20 (25mm-500mm) SERIES 20/21 Wafer/Lug SANITARY AND CHEMICAL / RESILIENT SEATED BUTTERFLY VALVES. The High Performance Company
BUTTERFLY VALVES SANITARY AND CHEMICAL / RESILIENT SEATED SERIES 20/21 Wafer/Lug 1-20 (25mm-500mm) The High Performance Company SERIES 20 1-20 (25mm-500mm) Bray Controls is proud to offer a high quality
More informationButterfly Valves T5 (Wafer) and T6 (Lugged) Series
Butterfly Valves T5 (Wafer) and T6 (Lugged) Series 50-600mm size range Cartridge type replaceable seat Full Vacuum to 16 bar pressure range (up to 300mm sizes) Universal flanging compatibility on wafer
More informationButterfly Valves Slim Disc Design T3 (Wafer) and T4 (Lugged) Series
Butterfly Valves Slim Disc Design T3 (Wafer) and T4 (Lugged) Series 50-300mm size range Cartridge type replaceable seat 316 stainless steel disc Full vacuum to 16 bar pressure range Universal flange compatibility
More informationRed Valve. The World Leader In Pinch Valve Technology MANUAL PINCH VALVES
Red Valve The World Leader In Pinch Valve Technology MANUAL PINCH VALVES Manual Red Valve Pinch Valves Same Face-to-Face As Gate, Plug, Or Ball Valves To 12" 100% Full Port Bi-Directional Droptight Shutoff
More informationGrinnell Grooved Fire Protection Products Grooved Fittings
Technical Services: Tel: (800) 38-932 / Fax: (800) 79-5500 www.tyco-fire.com Grinnell Grooved Fire Protection Products Grooved Fittings General Description LPCB Vd S The grooved fittings provide an economical
More informationFull View Flow Indicator
Full View Flow Indicator Threaded and Flanged Process Connection Installation / Operation / Maintenance Manual P.O. Box 1116 Twinsburg, OH 44087 Phone: 330/405-3040 Fax: 330/405-3070 E-mail: view@ljstar.com
More informationDatasheet December Daniel Orifice Plates and Plate Sealing Units Differential Pressure Flow Meters
Datasheet December 2017 Daniel Orifice Plates and Plate Sealing Units Differential Pressure Flow Meters Differential Pressure Flow Meter Datasheet Daniel Orifice Plates and Plate Sealing Units Quality
More informationMILLCENTRIC ECCENTRIC PLUG VALVE
ISO 9001 Certified MILLCENTRIC ECCENTRIC PLUG VALVE Milliken Valve offers the following for your water and wastewater needs: Eccentric Plug Valves ~ Series 601/600 Flanged & MJ ~ Series 601S Stainless
More information