JUMO MIDAS C18 SW. OEM pressure transmitter - seawater. Applications

Transcription

1 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page /6 JUMO MIDAS C8 SW OEM pressure transmitter - seawater Applications Water treatment (reverse osmosis), for example sea water desalination plants, deionized water plants (e.g. to generate pure water) Organic acids, for example acetic acid Solutions containing chlorides such as sea water, brackish water and salt solutions, for example ballast tanks on ships, offshore applications, tide level measuring systems and above-ground fish farms Brief description The JUMO MIDAS C8 SW pressure transmitter has a resistant and hysteresis-free ceramic measuring cell as well as a titanium housing and process connection. Titanium was selected as a material due to its extraordinarily high resistance to corrosion, especially compared to organic acids and solutions containing chlorides. The instrument is able to record relative pressures in the measuring range.6 to 00 bar. 4 to 0 ma (two wires) and DC 0 to 0 V (three wires) are available as standard signals. Customer benefits Process safety The high quality of each pressure transmitter is ensured by a 00 % final inspection of a fully automated measuring and calibrating system. The resistance of the materials that are used leads to high system availability. Together with the oil-free measuring cell, which does not allow any filling oil to escape if the instrument bursts, a high level of process safety is ensured for critical processes, for example reverse osmosis. Economical A proven design ensures efficient production, which shortens delivery times. The resistant materials cut down on cleaning and repair processes, reducing system downtimes accordingly as well as associated costs. The compact and light design opens up many possible applications for users and also makes it easier to decide what to buy when it comes time for a replacement. Type 400 with round plug M Type 400 with fixed cable Special features Aluminum oxide ceramic measuring cell Titanium enclosure and process connection Long-term stability < 0. % Weighs about 40 % less compared to comparable stainless steel variants Encapsulated for protection against vibration, condensation and moisture Made in Germany

2 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page /6 Technical data General information Reference conditions DIN 6086 and EN Sensor Principle of measurement Thick film on ceramic body (piezoresistive) Permissible load change > 0 million, 0 to 00 % measurement range Location Mounting position Any Calibration position Device standing upright, process connection on bottom Measuring range The measurement ranges start at 0 bar Measuring range bar Overload capacity a bar Bursting pressure bar Measuring range -to+0.6 -to+.5 -to+ -to+5 -to+9 -to+5 -to+4 bar Overload capacity a bar Bursting pressure bar a. All pressure transmitters are vacuum-proof. Output Analog output a Electrical current Output to 0 ma, two wires Voltage Output 45 DC 0 to 0 V, three wires Step response time T 90 ms Burden Electrical current 4to0mA, two wires R L (U B - 8 V)/0.0 A (Ω) Voltage DC0to0V, three wires R L 0 kω a. Additional outputs are available on request.

3 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page /6 Mechanical properties Process connection Material Process seal a Ambient conditions Titanium grade.705 (Ti) Seal 60 FPM Sensor Material Ceramic Al O 96 % Enclosure Material Titanium grade.705 (Ti) Electrical connection Material Fixed cable, PBT-GF0, PVC electrical connection Round plug M, PBT-GF0 electrical connection 6 Terminal box, PBT-GF0, PA, silicon electrical connection 6 Weight 44 g with process connection 50 (G /4) and electrical connection 6 (round plug M ) a. Additional materials are available on request. Note the resistance of the selected sealing material! Permissible temperatures Medium -0 to +5 C Environment -0to+85 C,-40to+5 C on request Storage -40 to +5 C, for version with fixed cable -0 to +00 C Permissible relative humidity In operation 00 % rel. humidity, incl. condensation on the outer sleeve of the instrument Storage 90 % relative humidity, no condensation Permissible mechanical loading Vibration resistance a 0 g, 5 to 000 Hz Shock resistance b 00 g for ms Electromagnetic compatibility Interference emission c Class B Interference immunity c Industrial requirements Protection d Fixed cable, electrical connection Round plug M, electrical connection 6 Terminal box, electrical connection 6 IP67 IP67 IP65 a. IEC b. IEC c. EN 66-- d. EN 6059 (when connected with suitable mating piece)

4 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page 4/6 Accuracy Nominal measuring range (bar) 0 to.6 0 to.5 0 to 4 0 to 6 0 to 0 0 to 6 0 to 5 0 to 40 0 to 60 0 to 00 Non-linearity (% of end value) a Total error at 0 C 0.5 (% of end value) b Total error for -0 to +00 C.6.4 (% of end value) c Long-term stability d 0. % of end value annually Measuring range (bar) - to.6 - to.5 - to - to 5 - to 9 - to 5 - to 4 Non-linearity (% of end value) a Total error at 0 C (% of end value) b Total error for -0 to +00 C (% of end value) c Long-term stability d 0. % of end value annually a. Non-linearity based on limit point setting b. Includes: non-linearity, hysteresis, non-repeatability, deviation from initial and final values of measuring range c. Includes: non-linearity, hysteresis, non-repeatability, deviation from initial and final values of measuring range, thermal effect on initial value of measuring range and span d. See data sheet 4000 Auxiliary power Supply voltage U B a 4to0mA, two wires, output 405 DC 0to0V, three wires, output 45 Power consumption 4to0mA, two wires, output 405 DC 0to0V, three wires, output 45 Reverse polarity protection Circuit DC 0 to 0 V, nominal power supply DC 4 V DC.5 to 0 V, nominal power supply DC 4 V 5 ma ma YES SELV a. Residual ripple: Peak voltages must not exceed or fall below the values specified for the supply voltage.

5 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page 5/6 Connection diagram Connection Terminal assignment a 4to0mA, two wires, output 405 Supply voltage DC 8 to 0 V DC0to0V, three wires, output 45 Supply voltage DC.5to0V U B /S+ 0V/S- U B 0V/S- S+ Fixed cable White Brown White Brown Yellow 4 6 Round plug M 6 Terminal box a. Illustration: Connection on pressure transmitter Color assignment: Round plug M bn Brown 4 bk Black The color assignment applies only wh White 5 gy Gray to A-coded standard cables! bu Blue Dimensions Electrical connection and process connection SW 4 Tourque: 8±Nm Tourque: 8±Nm Tourque: 8±Nm

6 Delivery address: Mackenrodtstraße 4 Phone: Fax: Phone: Fax: Data Sheet 400 Page 6/6 Order details () Basic type 400 JUMO MIDAS C8 SW OEM pressure transmitter - seawater () Basic type extension 000 None 999 Special design () measuring range Overpressure to.6 bar to.5 bar to 4 bar to 6 bar to 0 bar to 6 bar 46 0 to 5 bar 46 0 to 40 bar 46 0 to 60 bar to 00 bar Negative overpressure to +0.6 bar to +.5 bar 48 -to+bar 48 -to+5bar 48 -to+9bar to +5 bar to +4 bar 999 Special measuring range (4) Output to 0 ma, two wires 45 DC 0 to 0 V, wires (5) Process connection 5 G /4 DIN EN 87 a (6) Process connection material 60 Titanium (7) Seal material 60 FPM b (8) Electrical connection Fixed cable, m (other lengths available on request) 6 Round plug M 6 Terminal box EN , Form A, ex DIN 4650 (9) Extra codes 000 None 60 Enlarged pressure channel Ø 8 mm a. Only available in combination with extra code 60, enlarged pressure channel. b. as standard () () () (4) (5) (6) (7) (8) (9) Order code / /... Sample order 400 / / 60 Accessories Item Part no. 4-pin cable connector, straight, M with m PVC cable pin cable connector, angled, M with m PVC cable