Fundamentals of Oil Analysis

Size: px
Start display at page:

Download "Fundamentals of Oil Analysis"

Transcription

1 IRC RESEARCH AND TECHNOLOGY FORUM Wednesday May 6, 2015 Thursday May 7, 2015 Madison, WI University of Wisconsin-Madison Pyle Center 702 Langdon St. University of Wisconsin-Madison Fundamentals of Oil Analysis Tim Vann / WearCheck USA Cary, North Carolina

2 WearCheck USA 501 Madison Ave Cary, North Carolina 27513

3 WearCheck International Group Worldwide Leaders WearCheck is the world-wide leader in oil analysis. Since 1966 WearCheck has been providing condition-monitoring services to all sectors of industry. With operations in 10 countries, the company employs about 1,000 people and processes over 1 million samples per year.

4 Fundamentals of Oil Analysis 2015 WearCheck International. All rights reserved. Terms of use.

5 Maintenance Strategies Reactive Maintenance replace components when they fail Fix and repair components upon failure. Preventive Maintenance replace components before we expect them to fail Fix and repair components before their anticipated failure date. Predictive Maintenance perform corrective maintenance when condition monitoring detects problems Condition-Monitoring for detecting potential failures to control maintenance actions. Proactive Maintenance prevent maintenance problems by identifying and correcting root causes Prevent the situations that cause premature component failure. Reduce overall maintenance costs WearCheck International. All rights reserved. Terms of use.

6 The Role of Oil Analysis Predictive Maintenance Monitor for abnormal wear modes Determination of proper oil change interval Detect environmental and process contamination Proactive Maintenance Evaluate filtration upgrades Evaluate lubricant type and brand changes Evaluate effectiveness of maintenance improvements Confirmation of maintenance activities Root cause failure analysis 2015 WearCheck International. All rights reserved. Terms of use.

7 Equipment Failure Cycle Ingress of contaminants and other oil contamination increases rate of fluid degradation. Contamination and poor fluid quality cause increased wear. Eventual equipment failure is inevitable. Oil analysis detects contamination and fluid degradation before these conditions cause equipment failure WearCheck International. All rights reserved. Terms of use.

8 Managing an Oil Analysis Program An Effectively Managed Oil Analysis Program Will Provide effective maintenance scheduling Minimize unscheduled downtime Extend equipment life Reduce maintenance costs Minimize installation errors Verify warranty and service claims Determine optimum oil drain intervals (ODI) Improve equipment reliability 2015 WearCheck International. All rights reserved. Terms of use.

9 Lubricant and Fluid Analysis

10 Lubricant and Fluid Analysis

11 Lubricant and Fluid Analysis

12 Material Services

13

14 Sample information form instructions < Ticket Stub to be kept for customer records. Each sample has a unique identifier for tracking purposes and is called a SIF number, or Sample Information Form number. E.g.. For this example form, the tracking number, or SIF number is WCI Complete contact information for first time customer or Customer Code assigned at time of initial sampling should always be present for each sample. On initial sampling for a unit, unique unit identifier and unit information should be as completely filled out as possible, especially component and oil types. On repeat samples for units previously tested, only unit ID and component type need to be indicated. Sample date, current time on unit, oil and filter should always be indicated, as well as whether oil and/or filter were changed at time of sampling Comment section is to be used for any concerns about unit or special attention customer wants to be given to a particular test.

15 Vacuum pumps Material Services Tubing Gauge plugs Sampling Hose

16

17 Oil Analysis Tests

18 Testing Includes ICP Analysis ASTM D C ASTM D445 Determines the parts per million (ppm) of all wear metals (Fe, Cr, Ni, Pb, Cu ), contaminants (Si, Na, K.), and additives (Ca, P, Zn, Mg, Mo ). Determine the viscosity of the oil at 40 C to determine if oil is still within specification. High viscosity can indicate oxidation, low viscosity can indicate contamination, improper make-up oil. TAN ASTM D974 Determines overall acidity (TAN) or remaining alkalinity Single best test to determine change-out interval. WEARCHECK Advanced Most industrial clients utilize the IND II oil WC sample IND kit. 2+PC Sample Kits Visual Screen In-house method Particle Count ISO 4406:1999 A inspection of both the oil color/clarity and the bottom of the sample bottle are taken, and any level of contamination, visual oil problems or visible wear debris of the oil is recorded. Determine cleanliness levels of oil. High particle count levels can indicate gross contaminant ingress, wear, filter by-pass or all of these issues. LMA-18 KF ASTM D6304 Determines level of moisture or water contamination in the oil.

19 Detecting Spectrometric Analysis (ICP)

20

21 Detecting Kinematic Viscosity (KV) Acid Number (TAN)

22 KV - Kinematic 40 C ASTM D445 Viscosity refers to the oil's flow characteristic. Under normal operating conditions, oil viscosity (thickness) increases gradually because lighter base oil fractions evaporate while the contaminant and degradation product levels build-up. Viscosity measurement will determine the extent to which the oil has become contaminated and/or degraded. Detect incorrect oil make-up/contamination Detect severe oil oxidation Viscosity is deemed abnormal when it has decreased by 10% or increased by 20% of the baseline value. Example We see the correlation between the marked increase in TAN (indicating severe oxidation) and the subsequent increase in viscosity (in this case from 105 to 174 cst. (sample is from a compressor using Mobil Delvac 1. The compressor shows high copper and aluminum wear.) 2015 WearCheck International. All rights reserved. Terms of use.

23

24 Detecting Particles Process Contamination Improper Oil Make-up Dirt Water

25 Cleanliness of New Oil View through the bung hole of a barrel of new hydraulic oil. Typical 18/13 New oil is guaranteed to be new, not clean In some situations the oil you are throwing out is cleaner that the oil you are putting in Oil cleanliness is not vendor specific Ref: WearCheck New oil filtered on 0.8µm PDF at 100X magn.

26

27 How is Oil Cleanliness Measured? Particle count (1 ml of fluid) Particle Size Classification (2, 5, 15, 25, 50, 100µm) (4, 6, 14, 21, 38, 71µm) Cleanliness Code (ISO 4406:1999 ) Ref: WearCheck

28 Effect of Cleanliness on Component Life Component life is dependent on the cleanliness of the lubricating fluid. The cleanliness of any lubricant is dependent on oil handling practices, top up procedures and the quality of both air breather and oil filtration. Cleaner Oil = Longer Component Life Ref: Pall

29 Material Services Vacuum pumps Sample Kits Tubing Gauge plugs Fast sampler

30 Contamination Dirt Source Environmental (Dust, Dirt) Cause Faulty air filtration, seals, air breathers Symptom Gouging of metal surfaces

31 Dirt Entrainment ICP Spectrometric Analysis Silicon (or Silica, Dirt) next to oxygen is one of nature's most prolific elements and the single greatest cause of oil contamination, component wear damage and potential failure. Believe it or not, most of the dirt in engines enters via poorly maintained air intake systems and faulty air cleaners. In other components, dirt can enter (and does) almost anywhere there is a loose clamp, damaged gasket and seals, breather tubes, ill fitting dust covers, loose or missing bolts, filler caps and inspection plates, damaged housings...the list is almost endless. Silica contamination can "dust" and engine all by itself, but when combined with other contaminants such as fuel, glycol, and water, equally disastrous results can be expected. Damaged Air Filter and/or Air Cleaner Poorly Maintained Air Intake System Figure ICP-1 Example In Figure ICP-1 the severe silica (Si) level indicates dirt ingress. The resulting severe iron (Fe) and Aluminum (Al) levels are as a direct result of abrasive wear from the dirt particles to the cylinder assembly.

32 Contamination Water Source Condensation, Environmental, Combustion Cause Leaking seals, air breathers with no dessicator Symptom Rusting and corrosive etching Sludge, oil line plugging Scale deposits

33

34 Effect of Moisture on Component Life Component life is dependent on the dryness of the lubricating fluid. Dryer Oil = Longer Component Life Rolling Element Bearings Journal Bearings Ref: SKF, OSU

35 Keep it Clean and Dry Portable Filter Cart Desiccating Air Breathers

36 Accomplished via coordination with WearCheck Canada Software

37

38 Conquer your biggest maintenance challenges: Different sites, different departments, different responsibilities? Collaborate in one common maintenance workplace. Different maintenance systems, different maintenance databases? A common maintenance workspace. Overload of oil analysis data, poorly organized program, no follow up? A system to track your oil analysis program. WebCheck is a maintenance extranet that uses analytical and collaborative tools to consolidate individuals, management groups, the entire organization and OEM maintenance extranets. With your maintenance information centralized the result is better maintenance decisions. From the inception of your Oil Analysis program, effective management is essential to ensure you realize the full potential from your program and reap the maximum return on your maintenance investment. WebCheck ensures that you have the knowledge and tools available at your fingertips to manage your program at each stage of the Oil Analysis Cycle.

39 Review Reports Receive Notification of Completed Samples Notification Completed OA results Once several samples from a batch of samples submitted to the laboratory have been completed the Client is notified by . The informs the Client of which samples have been completed, what the status of those samples are as well as which samples are still awaiting completion. Clients can modify settings for which samples they receive notification on.

40 Sample Reports

41 Review Reports IND 2 Sample Report Unit Information Including make, model, s/n Test kit used Recommendation Summary and any necessary corrective actions required. Contamination Dirt, Water, Particle Count (ISO Code) Identifies any abnormal contaminants present in the oil. Quick Sample Status Unit Identification Sample Information Sample, Recieved Date Sample Number Time on oil, filter, component Abnormal Limits Target ISO Cleanliness Level Wear Wear metals in parts per million (ppm) Determines if equipment is wearing Abnormally. Oil Condition Oil additive levels in ppm 40 C Total Acid Number (AN) Determines if oil is suitable for continued use. New oil baseline CUSANY [WCALAB] Report Identification 2015 WearCheck International. All rights reserved. Terms of use.

42 Review Reports IND 2 Sample Report (back) Ferrous Wear Metal Graph All ferrous wear metals charted on a log graph showing up to 25 samples chronologically. Allows for the visual identification of wear of alloyed components. Particle Count Graph A chart of the current particle levels in an easy to read format showing the current particle levels against the ISO level. The chart also shows the target level. Babbitt Wear Metal Graph All non-ferrous wear metals charted on a log graph showing up to 25 samples chronologically. Allows for the visual identification of wear of alloyed components. Viscosity Graph Trend of the viscosity in cst showing both upper and lower limits. TAN Graph Trend of the TAN level of the oil showing both the base and typical levels of the base oil. CUSANY [WCALAB] Pg. 2 ATTN: JOHN DOE ABC MANUFACTURING LTD. 123 INDUSTRIAL DRIVE STEELTOWN, NY (212) FAX (212) Customer contact info 2015 WearCheck International. All rights reserved. Terms of use.

43 Product Support

44 Questions and Answers Thank You IRC Research and Technology Forum

Kees Veltman Director/Owner

Kees Veltman Director/Owner Kees Veltman Director/Owner 696a Noria/Solinas klanten Noria Corporation The World Leader in Machinery Lubrication and Oil Analysis Education and Consulting Education & Training Consulting Magazine & Newsletters

More information

3/15/2017. Oil Analysis: When the Oil Speaks, You Should Listen! Oil Analysis. Common Wear Metals Found in Oil. Common Wear Metals Found in Oil

3/15/2017. Oil Analysis: When the Oil Speaks, You Should Listen! Oil Analysis. Common Wear Metals Found in Oil. Common Wear Metals Found in Oil Oil Analysis Oil Analysis: When the Oil Speaks, You Should Listen! Michael Holloway, ALS Tribology Ken Hill, WearCheck Lubrication Services Session Number T16 Elemental Detects the amount and type of elements

More information

INTERPRETATION OF USED COOLANT ANALYSIS

INTERPRETATION OF USED COOLANT ANALYSIS RECO-COOL TECHNICAL BULLETIN 0006/12 INTERPRETATION OF USED COOLANT ANALYSIS Testing of coolants in use (whilst still within service) can give a vital indication on the health of the cooling system of

More information

Contamination Handbook. For use with the Schroeder EasyTest Patch Test Kit (EPK) and TWG Fluid Analysis

Contamination Handbook. For use with the Schroeder EasyTest Patch Test Kit (EPK) and TWG Fluid Analysis Contamination Handbook For use with the Schroeder EasyTest Patch Test Kit (EPK) and TWG Fluid Analysis Table of Contents How to use this handbook.... page 4 Contamination Classification in accordance

More information

Oxidation Loss of additive effectiveness Dispersancy, Corrosion, Wear Permanent viscosity drop in multi - grade oils

Oxidation Loss of additive effectiveness Dispersancy, Corrosion, Wear Permanent viscosity drop in multi - grade oils Used oil analysis is comparable to a medical analysis with a blood test. Like blood, lubricating oil contains a good deal of information about the envelope in which it circulates. Wear of metallic parts,

More information

Report On Sequence IVB Evaluation Version. Conducted For. NR = Non-reference oil test RO = Reference oil test

Report On Sequence IVB Evaluation Version. Conducted For. NR = Non-reference oil test RO = Reference oil test Report On Evaluation Version Conducted For V = Valid I = Invalid N = Results cannot be interpreted as representative of oil performance (Nonreference oil) and shall not be used for multiple test acceptance

More information

Oil High-capacity and full of power reserve by premature check

Oil High-capacity and full of power reserve by premature check Oil analysis Oil High-capacity and full of power reserve by premature check Oil is the central component of every hydraulic system. When a system fails, oil contamination is usually the cause. Oil is continously

More information

MONITORING SOLUTION FOR MARINE MAIN ENGINE CYLINDERS PROTECTION

MONITORING SOLUTION FOR MARINE MAIN ENGINE CYLINDERS PROTECTION COLD CORROSION MONITORING SOLUTION FOR MARINE MAIN ENGINE CYLINDERS PROTECTION UNIMARINE MARINE ENGINES CYLINDERS SCRAPE-DOWN OIL ANALYSIS (CSDOA) FOCUS ON PREVENTIVE MAINTENANCE UniMarine provides high

More information

Oil secure power and performance

Oil secure power and performance Oil analysis Oil secure power and performance through professional control Oil is the central component of every hydraulic system. When a system fails, oil contamination is usually the cause. Oil is continously

More information

MiniLab EL Series for High Performance Engine Development and Maintenance

MiniLab EL Series for High Performance Engine Development and Maintenance MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine

More information

SOME OTHER BENEFITS DERIVED FROM LUBE OIL ANALYSIS ARE:

SOME OTHER BENEFITS DERIVED FROM LUBE OIL ANALYSIS ARE: SAMPLING OVERVIEW: A preventive maintenance program using lube oil analysis is beneficial in many ways. With scheduled oil analysis, wear products can be identified and corrective action taken before equipment

More information

Wind Turbine Gear Lubricants

Wind Turbine Gear Lubricants October 2015 Wind Turbine Gear Lubricants PCIMA TIR: External 2 JLPrince 2015 Exxon Mobil Corporation. All rights reserved. Overview Wind Turbine Gear boxes Challenges and Lubrication Impact Lubricant

More information

Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green!

Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green! Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green! Oil Characteristics Oil does not wear out It oxidizes during the combustion process It becomes contaminated due to high temperatures,

More information

UIN B. Diesel Engine E141. Unit No. Unit: Make Model Serial No.

UIN B. Diesel Engine E141. Unit No. Unit: Make Model Serial No. DATE SAMPLED 16-May-15 15-Apr-15 15-Mar-15 03-Mar-15 15-Feb-15 15-Jan-15 DATE RECEIVED 22-May-15 23-Apr-15 23-Mar-15 09-Mar-15 20-Feb-15 22-Jan-15 DATE REPORTED 26-May-15 24-Apr-15 24-Mar-15 11-Mar-15

More information

Establishing Proper Lubricant Service Intervals For Fleet Applications A Case Study by Dave Yunkers, Analysts, Inc.

Establishing Proper Lubricant Service Intervals For Fleet Applications A Case Study by Dave Yunkers, Analysts, Inc. Establishing Proper Lubricant Service Intervals For Fleet Applications A Case Study by Dave Yunkers, Analysts, Inc. Abstract Management has decided to pursue cost savings by extending oil drain intervals

More information

Shell IMAA Workshop Making Sense of Oil Analysis

Shell IMAA Workshop Making Sense of Oil Analysis Shell IMAA Workshop Making Sense of Oil Analysis January 30, 2018 Tom Stuart Shell Lubricants Technical Advisor Greg Paluska Shell Lubricants Technical Team Lead East 04 October 2017 1 Why Oil Analysis?

More information

Techenomics Oil Analysis Information

Techenomics Oil Analysis Information Techenomics Oil Analysis Information Oil Analysis is the sampling and Laboratory analysis of the lubricants properties; it provides knowledge of lubricants suspended s, and wear debris. Oil Analysis, generally

More information

QUICK REFERENCE GUIDE ENGINE, DRIVE TRAIN AND HYDRAULIC REPAIR INDICATORS

QUICK REFERENCE GUIDE ENGINE, DRIVE TRAIN AND HYDRAULIC REPAIR INDICATORS QUICK REFERENCE GUIDE ENGINE, DRIVE TRAIN AND HYDRAULIC REPAIR INDICATORS TABLE OF CONTENTS PLANNED INDICATORS...5 ENGINE INDICATORS...6 FINAL DRIVE & BRAKE INDICATORS...12 TRANSMISSION INDICATORS...16

More information

Tec Check. Fluid Analysis Program

Tec Check. Fluid Analysis Program Tec Check Fluid Analysis Program INTRODUCTION Cummins TEC Check Fluids Analysis Program is key for monitoring your engines contaminant levels, our program can provide evidence of system weakness or malfunction

More information

MAXIMIZING PUMP RELIABILITY THROUGH PRECISION LUBRICATION

MAXIMIZING PUMP RELIABILITY THROUGH PRECISION LUBRICATION 1 MAXIMIZING PUMP RELIABILITY THROUGH PRECISION LUBRICATION INTRODUCTION More so than any other industry, the hydrocarbon processing industry relies on rotating equipment to deliver results. From pumps

More information

Standard Analysis Report

Standard Analysis Report Standard Analysis Report The status identifies the condition of the sample, Normal, Warning or Problem sample Laboratory sample number Clients details, equipment ID, Oil type and what compartment Date

More information

Pneumatic High-Viscosity Filtration System Instruction Manual

Pneumatic High-Viscosity Filtration System Instruction Manual Pneumatic High-Viscosity Filtration System Instruction Manual P/N: 61512 05/17 1 2 Pneumatic High Viscosity Filtration Systems PN: 61512 14 April, 2009 rev A 36933 Pneumatic Hand Cart HV Filtration System

More information

Joint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards

Joint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards Joint Oil Analysis Program Spectrometer Standards VHG Labs Inc. Qualification Report For D19-0, D3-100 and D12-XXX Series Standards NF&LCFT REPORT 441/13-010 Prepared By: MICHAEL PERETICH, PhD Oil Analysis

More information

Fluid Maintenance. The hydraulic oil performs four functions in the hydraulic system:

Fluid Maintenance. The hydraulic oil performs four functions in the hydraulic system: The hydraulic oil performs four functions in the hydraulic system: Transmits Energy Coolant Lubricant Sealant Viscosity Viscosity is the rating of the oil thickness or resistance to flow. Viscosity is

More information

MnI Diesel, LLC MnI Maintenance, LLC. Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green!

MnI Diesel, LLC MnI Maintenance, LLC. Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green! MnI Diesel, LLC MnI Maintenance, LLC Setting the Standard in Oil Filtration Keep It Clean! & Keep It Green! Oil Characteristics Oil does not wear out It oxidizes during the combustion process It becomes

More information

TOTAL Cylinder Care ONBOARD IRON MEASUREMENT

TOTAL Cylinder Care ONBOARD IRON MEASUREMENT TOTAL Cylinder Care ONBOARD IRON MEASUREMENT CYLINDER Corrosion Careful checking of iron level and residual BN in drain oils have become essential in order to verify that the engine is being correctly

More information

OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH RUN BETTER LONGER OIL ANALYSIS CAN HELP YOU

OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH RUN BETTER LONGER OIL ANALYSIS CAN HELP YOU OIL ANALYSIS PROGRAMME OVERVIEW LUBEWATCH LUBEWATCH OIL ANALYSIS CAN HELP YOU RUN BETTER LONGER texaco-lubricants.com/lubewatch Increased productivity and optimal equipment performance LubeWatch oil analysis

More information

Q200. Aquamax FlashPoint. Q5800 MiniLab 53 MiniLab 153 MicroLab Q1000. Q100 Spectroil M. Q300/310 Q3000 Pat 940 Density 5

Q200. Aquamax FlashPoint. Q5800 MiniLab 53 MiniLab 153 MicroLab Q1000. Q100 Spectroil M. Q300/310 Q3000 Pat 940 Density 5 T2FM Q500 Spectroil M Q200 MiniLab 53 MiniLab 153 MicroLab 30-40 0 Q6000 Aquamax FlashPoint Q300/310 Q3000 Pat 940 Density 5 BENEFITS LNF Q200 Series Particle Counter, Wear Particle Classifier, Ferrous

More information

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12-XXX Series Standards

Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12-XXX Series Standards Joint Oil Analysis Program Spectrometer Standards SCP Science (Conostan) Qualification Report For D19-0, D3-100, and D12-XXX Series Standards NF&LCFT REPORT 441/15-008 Prepared By: MICHAEL PERETICH, PHD

More information

Fleet Solutions for Lubricant & Fluid Analysis

Fleet Solutions for Lubricant & Fluid Analysis Fleet Solutions for Lubricant & Fluid Analysis Maximize machine uptime Extend oil drains Prevent premature failures Oil Analysis for Vehicle Preventative Maintenance The reliable operation of vehicles

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-48 06 15 (May 2014) ---------------------------------- Preparing Activity: USACE Superseding UFGS-48 13 19.00 10 (January 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

Managing Particle Contamination with Chevron ISOCLEAN Certified Lubricants

Managing Particle Contamination with Chevron ISOCLEAN Certified Lubricants Managing Particle Contamination with Chevron ISOCLEAN Certified Lubricants It s the Small Stuff Construction companies with new and older equipment in their fleets must make combating particle contamination

More information

ControllingSiliconandSootContentintheCrankCaseOiltoImprovePerformanceofDieselEngine

ControllingSiliconandSootContentintheCrankCaseOiltoImprovePerformanceofDieselEngine Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering Volume 16 Issue 2 Version 1. Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals

More information

Ed Benelli. California Department of Toxic Substances Control. Office of Pollution Prevention and Green Technology

Ed Benelli. California Department of Toxic Substances Control. Office of Pollution Prevention and Green Technology Ed Benelli California Department of Toxic Substances Control Office of Pollution Prevention and Green Technology (916) 324-6564 Edward.Benelli@dtsc.ca.gov High Efficiency Oil Filter Project Engine Oil

More information

Container MBW12K90MC Thursday 25 Jan 2007

Container MBW12K90MC Thursday 25 Jan 2007 Cylinder Oil Drain Analysis & Engine Performance Report Samples Landed : SINGAPORE - 26 Jan 7 Received at Analysis Labs : 29 Jan 7 Engine :SAMSUNG MAN B&W 12K9MC MCR : 74,64 bhp @ 94 rpm Next Samples Due

More information

MOL HYDRO HYDRAULIC OILS EXTRA CLEANLINESS, MORE EFFICIENT OPERATION

MOL HYDRO HYDRAULIC OILS EXTRA CLEANLINESS, MORE EFFICIENT OPERATION MOL HYDRO HYDRAULIC OILS EXTRA CLEANLINESS, MORE EFFICIENT OPERATION EFFICIENT SOLUTIONS FOR ALMOST ALL APPLICATIONS Your hydraulic system achieves its maximum productivity when it gets the right lubricants,

More information

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320

COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 COMPRESSOR OILS HYCOM VDL T 32, 46, 68, 100, 150, 220, 320 Special Features: It is specially blended from saturated paraffinic Group II base stocks and selected premium grade of antioxidants, anti-rust,

More information

Table of Contents. 4. Before a New Turbocharger is Installed

Table of Contents. 4. Before a New Turbocharger is Installed Table of Contents 1. Turbocharger Overview ------------------------------------------------------------------ 1.1. Definition -----------------------------------------------------------------------------

More information

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA

More information

Operating Conditions that shorten Gas Engine Oil Life NNAMDI J. ACHEBE CLS, OMA I, MLT II, MLA III

Operating Conditions that shorten Gas Engine Oil Life NNAMDI J. ACHEBE CLS, OMA I, MLT II, MLA III Operating Conditions that shorten Gas Engine Oil Life NNAMDI J. ACHEBE CLS, OMA I, MLT II, MLA III Benefits Statement Going by Petrosave Laboratory oil analysis database information accumulated over the

More information

What can the Hartland Fluid Analysis Program Do For You?

What can the Hartland Fluid Analysis Program Do For You? What can the Hartland Fluid Analysis Program Do For You? Hartland Fluid Analysis is a preventive maintenance tool that provides a picture of both the fluid condition and the internal condition of a component

More information

40th API Automotive/Petroleum Industry Forum. Rebecca Monroe General Motors

40th API Automotive/Petroleum Industry Forum. Rebecca Monroe General Motors 40th API Automotive/Petroleum Industry Forum Rebecca Monroe General Motors TOP TIER TM Detergency Gasoline Program OEMs, working with Fuel Marketers, create a voluntary program to address global fuel detergency

More information

LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS. Genuine Protection

LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS. Genuine Protection Equipment care LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS Genuine Protection Genuine Protection Komatsu genuine lubricants and coolants are designed to ensure you get the best performance from your machine.

More information

EQUIPMENT CARE LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS. Genuine Protection

EQUIPMENT CARE LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS. Genuine Protection EQUIPMENT CARE LUBRICANTS, COOLANTS & FILTRATION SOLUTIONS Genuine Protection Genuine Protection Komatsu genuine lubricants and coolants are designed to ensure you get the best performance from your machine.

More information

Think Differently: Prevent Ammonia Compressor Failures

Think Differently: Prevent Ammonia Compressor Failures Think Differently: Prevent Ammonia Compressor Failures Ammonia Compressors are critical machines in the Food and Beverage Industry where the chilling or freezing of products is a requirement PREVENT AMMONIA

More information

lubricants analysis. complete solutions for your lab. Lubricants Analysis

lubricants analysis. complete solutions for your lab. Lubricants Analysis Lubricants Analysis lubricants analysis. complete solutions for your lab. PerkinElmer capabilities for lubricants analysis. The analysis of lubricants for conformity and process control has always been

More information

stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines

stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines Q8 Mahler Productivity and Reli 20 18 16 Oxidation Control The thin oil film separating the liner from

More information

ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels

ASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification

More information

Developing PMs for Hydraulic System

Developing PMs for Hydraulic System Developing PMs for Hydraulic System Focus on failure prevention rather than troubleshooting. Here are some best practices you can use to upgrade your preventive maintenance procedures for hydraulic systems.

More information

Maximizing Frac Pump Power-End Life

Maximizing Frac Pump Power-End Life Maximizing Frac Pump Power-End Life Weir Lubrication White Paper An optimal lubrication system holds the key By Ben Shuck, Pump Principal Engineer at Weir and John McCrady, Senior Engineer at Weir. Modern

More information

High Efficiency Bypass Oil Filtration Systems for your Engine and Hydraulic Oil. Kevin Kroger (PuraDYN Filter Yechnologies MDEC 2007.

High Efficiency Bypass Oil Filtration Systems for your Engine and Hydraulic Oil. Kevin Kroger (PuraDYN Filter Yechnologies MDEC 2007. High Efficiency Bypass Oil Filtration Systems for your Engine and Hydraulic Oil Kevin Kroger (PuraDYN Filter Yechnologies MDEC 2007 The Journey to CBM Reactive Planned/ Scheduled Condition Based Maintenance

More information

Mack T-11 D EGR Engine Oil Test. Report Packet Version No. Conducted For

Mack T-11 D EGR Engine Oil Test. Report Packet Version No. Conducted For Report Packet Version No. Conducted For V = I = N = Valid; The reference oil/non-reference oil was evaluated in accordance with the test procedure. Invalid; The reference oil/non-reference oil was not

More information

ISOCLEAN Proof of Performance: ACME CEMENT USA ACME CEMENT CO. Rocky Mountain Industrial Solutions

ISOCLEAN Proof of Performance: ACME CEMENT USA ACME CEMENT CO. Rocky Mountain Industrial Solutions ACME CEMENT CO Page 1 OVERVIEW Rocky Mountain Industrial Solutions as subcontractor for Rocky Mountain Industrial Services (similar name but 2 separate and unrelated companies) has successfully completed

More information

Analysis of Wear Metals Using the Teledyne Leeman Labs Prodigy Plus ICP-OES

Analysis of Wear Metals Using the Teledyne Leeman Labs Prodigy Plus ICP-OES Application Note AN1705 Analysis of Wear Metals Using the Teledyne Leeman Labs Prodigy Plus ICP-OES John Condon, Applications Chemist and Bruce MacAllister, Applications Chemist; Teledyne Leeman Labs Page

More information

LISTEN TO THE LIFEBLOOD OF YOUR MACHINE

LISTEN TO THE LIFEBLOOD OF YOUR MACHINE CAT SOS SERVICES SM LISTEN TO THE LIFEBLOOD OF YOUR MACHINE WARNING: YOUR FUEL TRANSFER PUMP IS LEAKING REPAIR BEFORE FAILURE SAVINGS: $32,000 FULL MENU OF FLUID ANALYSIS CAPABILITIES CAT SOS SERVICES

More information

Technical Datasheet. Portable oil and fuel cleanliness monitor - FS9001+ The most cost effective oil and fuel cleanliness monitor on the market

Technical Datasheet. Portable oil and fuel cleanliness monitor - FS9001+ The most cost effective oil and fuel cleanliness monitor on the market Technical Datasheet Portable oil and fuel cleanliness monitor - FS9001+ Particle Pal Live ISO/NAS/SAE particulate readings The most cost effective oil and fuel cleanliness monitor on the market 1 Central

More information

Purifiner Water Leak Test Report

Purifiner Water Leak Test Report Purifiner Water Leak Test Report 1 Summary This document and the content herein contains the procedure, log, protocol, report and analysis for the Purifiner leak test performed at Wågene Purifiner Technology

More information

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control C 19 meets the most severe industry requirements including the new hybrid test from Denison (T6H2OC), which incorporates both vane and piston pumps under wet and dry conditions over 600 hours. Formulated

More information

FILTRATION TECHNOLOGY STAUFF. STAUFF Check Oil Analysis & Oil Sampling Kit. Quality and Service Worldwide

FILTRATION TECHNOLOGY STAUFF. STAUFF Check Oil Analysis & Oil Sampling Kit. Quality and Service Worldwide FILTRATION TECHNOLOGY 2003 STAUFF STAUFF Check Oil Analysis & Oil Sampling Kit Quality and Service Worldwide STAUFF Check Oil Analysis & Oil Sampling Kits Australia Stauff Corporation (Pty.) Ltd. P.O.Box

More information

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA

Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations. Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA Non-Varnishing PAG-based Turbine Fluid and GEK Spec 32568h Recommendations Govind Khemchandani, Ph. D. The Dow Chemical Company Freeport, TX, USA STLE May 18-22, 2014, Florida Dow.com Presentation Objectives

More information

November 1st, Internal Ford Fusion Fleet Test

November 1st, Internal Ford Fusion Fleet Test November 1st, 2016 Internal Ford Fusion Fleet Test As part of the development work for the Prestone Cor-Guard Extended Life formulation which uses OAT technology, the service life of the new formulation

More information

Section 3.2. Machine Maintenance - Hydraulic Oil and Tank Information

Section 3.2. Machine Maintenance - Hydraulic Oil and Tank Information Section 3.2 Machine Maintenance - Hydraulic Oil and Tank Information Hydraulic Oil Tank: Hydraulic Tank Oil Level... 3.2.2 Sight Gauge... 3.2.2 Warning Lights... 3.2.2 Hydraulic Oil Tank Pressurizing System...

More information

FCL Filter Cart Flow rate up to 22 gpm (82 lpm)

FCL Filter Cart Flow rate up to 22 gpm (82 lpm) click here to return to website FCL Filter Cart Flow rate up to 22 gpm (82 lpm) Ideal for high viscosity Lubrication and hydraulic oils (ISOVG22 ~ ISOVG320) Filter new fluids during transfer and replenishment

More information

Machine and Lubricant Condition Monitoring for Extended Equipment Lifetimes and Predictive Maintenance at Power Plants Abstract 1.

Machine and Lubricant Condition Monitoring for Extended Equipment Lifetimes and Predictive Maintenance at Power Plants Abstract 1. Machine and Lubricant Condition Monitoring for Extended Equipment Lifetimes and Predictive Maintenance at Power Plants by: Malte Lukas and Daniel P. Anderson Spectro Incorporated Littleton, Massachusetts,

More information

HYDAC Diesel Fuel Cleanliness Testing White Paper

HYDAC Diesel Fuel Cleanliness Testing White Paper Final Filtered Diesel HYDAC Diesel Fuel Cleanliness Testing White Paper JANUARY 2017 1300 57 9990 www.bulkfuel.com.au 2 Bulk Fuel Australia HYDAC Diesel Fuel Cleanliness Testing White Paper January 2017

More information

Edition 04/2016. HYDAC Predictive maintenance

Edition 04/2016. HYDAC Predictive maintenance HYDAC Predictive maintenance Your partner for expertise in Predictive maintenance Predictive maintenance Operator model/worldwide field service Implementing a predictive maintenance strategy allows the

More information

PRODUCT INFORMATION SHEET

PRODUCT INFORMATION SHEET Page 1 of Total 5, 64401 WYNN'S AUTOMATIC TRANSMISSION FLUSH PRODUCT INFORMATION SHEET WYNN'S AUTOMATIC TRANSMISSION FLUSH Product Number: 64401 24 x 325 ml WYNN'S AUTOMATIC TRANSMISSION FLUSH is an automatic

More information

Sequence VH Report Forms Version Conducted For

Sequence VH Report Forms Version Conducted For Report Forms Version Conducted For V = Valid I = Invalid N = Results cannot be interpreted as representative of oil performance (Non-Reference Oil) and shall not be used in determining an average test

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Cat S O S Services. Understanding Your Results. Understanding Your: S O S Reports S O S Oil Results S O S Coolant Results S O S Fuel Results

Cat S O S Services. Understanding Your Results. Understanding Your: S O S Reports S O S Oil Results S O S Coolant Results S O S Fuel Results Cat S O S Services SM Understanding Your Results Understanding Your: S O S Reports S O S Oil Results S O S Coolant Results S O S Fuel Results Contents Overview of S O S Reports... 4 Overview of S O S Interpretation...

More information

Oil monitoring and inspection

Oil monitoring and inspection SERVICE BULLETIN #35 FRAMO MARINE CARGO PUMPING SYSTEM Oil monitoring and inspection Oil Monitoring and Inspection Program (OMP) includes: Oil sampling Oil analysis Filter condition Annual Inspection Pre-Docking

More information

Engine Oil Analysis. John C. Hildreth July 25, 2017

Engine Oil Analysis. John C. Hildreth July 25, 2017 Engine Oil Analysis John C. Hildreth John.Hildreth@uncc.edu July 25, 217 1. Purpose and Objective Purpose Understand how (fast) engine oil changes over time to investigate the potential for extending drain

More information

Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study

Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study Oil Soluble Polyalkylene Glycol Hydraulic Fluid: Equipment Performance Testing and Case Study Authors Andrew Larson, The Dow Chemical Company Dr. Martin Greaves, The Dow Chemical Company The Dow Chemical

More information

Work smarter, not harder. How to make your maintenance program more efficient

Work smarter, not harder. How to make your maintenance program more efficient Work smarter, not harder How to make your maintenance program more efficient Contents 1. Ten steps to kick-start a comprehensive lubrication program 2. For an effective maintenance program, partner with

More information

224 Sulfur Standards 224 Biodiesel 225 Crude Oil 225 Diesel 225 Isooctane 226 Mineral Oil 226 Residual Oil SCP SCIENCE

224 Sulfur Standards 224 Biodiesel 225 Crude Oil 225 Diesel 225 Isooctane 226 Mineral Oil 226 Residual Oil SCP SCIENCE SCP SCIENCE 211 conostan - oil analysis standards SCP SCIENCE is proud to present CONOSTAN - the world s most trusted name in Oil Standards, whose industryleading position is the result of a uniquely superior

More information

Ovenworx Chain Spray/Brush System. Automatic Lubrication System Delivers Right Amount of Lubricant at Right Time to Critical Equipment

Ovenworx Chain Spray/Brush System. Automatic Lubrication System Delivers Right Amount of Lubricant at Right Time to Critical Equipment Reliability roduct Ovenworx Chain Spray/Brush System Automatic Lubrication System Delivers Right Amount of Lubricant at Right Time to Critical Equipment The Ovenworx Chain Spray/Brush System is an automatic

More information

ADDINOL Eco Gear Longlife x 4 Long-term warranty. Longlife. Guarantee

ADDINOL Eco Gear Longlife x 4 Long-term warranty. Longlife. Guarantee ife x 4 ADDINOL Eco Gear Longlife x 4 Long-term warranty Longlife Guarantee Long-term warranty terms For ADDINOL Eco Gear M and S ADDINOL guarantees a service life of four years in industrial gears and

More information

Real Time Oil Condition Monitoring, Practical Examples of Trend Analysis & Failure Prevention

Real Time Oil Condition Monitoring, Practical Examples of Trend Analysis & Failure Prevention Real Time Oil Condition Monitoring, Practical Examples of Trend Analysis & Failure Prevention Sam Botterill 1 and Chris Greenwood 2 1 Managing Director System 7 Australia Limited 37 Spitfire Place, Rutherford,

More information

LUBRICANT (OIL) ANALYSIS COMPARISON

LUBRICANT (OIL) ANALYSIS COMPARISON LUBRICANT (OIL) ANALYSIS COMPARISON Objective (General): Objective (Specific): Methodology: Rig: Operated by: To monitor the rates of wear, contaminants and additives in used engine oils. Examples of contaminants

More information

Report On Sequence IIIG Evaluation. Version. Conducted For. NR = Non-Reference Oil Test RO = Reference Oil Test

Report On Sequence IIIG Evaluation. Version. Conducted For. NR = Non-Reference Oil Test RO = Reference Oil Test Report On Evaluation Version Conducted For V = Valid I = Invalid N = Results Cannot Be Interpreted As Representative Of Oil Performance (Non-Reference Oil) And Shall Not Be Used For Multiple Test Acceptance

More information

UL ALTERNATIVE FUELS & STANDARDS UPDATE

UL ALTERNATIVE FUELS & STANDARDS UPDATE UL ALTERNATIVE FUELS & STANDARDS UPDATE - 2008 Presented at the 2008 EPA UST Annual Tank Conference ROLAND RIEGEL - PRIMARY DESIGNATED ENGINEER Flammable Liquids Containment Products REVIEW of PREVIOUS

More information

PRODUCT CATALOG. Luneta.com

PRODUCT CATALOG. Luneta.com PRODUCT CATALOG Luneta.com 1 ABOUT US Luneta, LLC develops advanced machinery lubricant inspection technology for machine condition monitoring and reliability. Luneta s technology is designed primarily

More information

MiniLab EL Series for High Performance Engine Development and Maintenance

MiniLab EL Series for High Performance Engine Development and Maintenance MiniLab EL Series for High Performance Engine Development and Maintenance Optimize performance output Detect problems early Ensure safety in operation Engine Oil Analysis: A Reliable Technique for Engine

More information

FIRST FOR VERSATILITY THE HIPPO FILTER SYSTEM. Before After

FIRST FOR VERSATILITY THE HIPPO FILTER SYSTEM. Before After FIRST FOR VERSATILITY THE HIPPO FILTER SYSTEM Full-flow filtration systems By-pass filtration systems Water Based Fluids Process Fluids Heating Oils Turbine Oils Bio-ethanol Kerosene Diesel Petrol Oils

More information

Mining & Haul Truck Filtration Systems

Mining & Haul Truck Filtration Systems Mining & Haul Truck Filtration Systems 1. Rear Differential, Wheel Motor, Hydraulic, and Transmission Filtration Systems 2. On-board Filtration Systems for Rear Differential and Hydraulic Systems 3. Crusher

More information

LUBCHECK OIL AND MACHINE DIAGNOSTICS

LUBCHECK OIL AND MACHINE DIAGNOSTICS LUBCHECK OIL AND MACHINE DIAGNOSTICS MUCH MORE RELIABLE MACHINERY REDUCED COSTS IN INDUSTRIAL PRODUCTION, EVEN ONE HOUR OF DOWNTIME CAN CAUSE MILLIONS IN LOSSES Sudden malfunctions resulting in production

More information

Sampling kits and test suites

Sampling kits and test suites Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,

More information

Deister Machine Company, Inc. Heavy Duty System Saver Operating Instructions

Deister Machine Company, Inc. Heavy Duty System Saver Operating Instructions June 8, 2005 Deister Machine Company, Inc. Heavy Duty System Saver Operating Instructions Equipment Description- The Deister System Saver is a portable hand held oil pumping and filtration unit designed

More information

Improving predictive maintenance with oil condition monitoring.

Improving predictive maintenance with oil condition monitoring. Improving predictive maintenance with oil condition monitoring. Contents 1. Introduction 2. The Big Five 3. Pros and cons 4. The perfect match? 5. Two is better than one 6. Gearboxes, for example 7. What

More information

D ISB Lubricant Performance Test. Report Packet Version No. Method. Conducted For:

D ISB Lubricant Performance Test. Report Packet Version No. Method. Conducted For: D 7484 - ISB Lubricant Performance Test Report Packet Version No. Method Conducted For: V = I = N = Valid; The reference oil / non-reference oil was evaluated in accordance with the test procedure. Invalid;

More information

The following report discusses effect on HTHS Viscosity of Proton's Engine Oils by addition of X-1R Engine Treatment.

The following report discusses effect on HTHS Viscosity of Proton's Engine Oils by addition of X-1R Engine Treatment. Technical Report The following report discusses effect on HTHS Viscosity of 's s by addition of X-1R Engine. Introduction: Oxidation stability is a chemical reaction that occurs with a combination of the

More information

RANDO HDZ. Rando HDZ, our premium, zinc additized, anti-wear hydraulic oil that helps provide you with:

RANDO HDZ. Rando HDZ, our premium, zinc additized, anti-wear hydraulic oil that helps provide you with: HYDRAULIC OILS RANDO HDZ The demands on your equipment, time and bottom line multiply daily. Rando HDZ helps keep your equipment operating longer, faster and harder, allowing you to extend the time between

More information

Supply of Services for Detailed OEB Crude Assay Analysis

Supply of Services for Detailed OEB Crude Assay Analysis Tender Number [9900009229] Supply of Services for Detailed OEB Crude Assay Analysis SCOPE OF WORK SCOPE OF WORK 1. Introduction Orpic is the brand name for Oman Oil Refineries and Petroleum Industries

More information

VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis

VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis VHG Labs, Inc. Standards and Supplies for Spectrochemical Oil Analysis Metallo-Organic Standards from VHG Labs VHG Labs has been a provider of quality analytical products and services for over 25 years.

More information

HY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm)

HY-PRO FILTRATION. FSL Filter Unit Flow rate up to 22 gpm (83 lpm) HY-PRO FILTRATION Materials of Construction Assembly Frame: Painted Steel Drip Pan: Painted Steel Filter Assembly: Epoxy coated steel 25 or 50 psid bypass available True differential pressure indicator

More information

Significance of Each Test. 1. Color (Visual)

Significance of Each Test. 1. Color (Visual) Significance of Each Test 1. Color (Visual) Determine the color of lubricant product by assessing the appearance of transmitted light appearance and intensity, as compare with a standard. Color alone is

More information

TURBOCHARGER WARRANTY ANALYSIS GUIDELINES

TURBOCHARGER WARRANTY ANALYSIS GUIDELINES ABOUT US Rotomaster is a turbocharger manufacturing company driven by customer demand and focused on our customer s success. The quality put forth by Roto is world class utilizing modern CNC (Computerized

More information

What is Wear? Abrasive wear

What is Wear? Abrasive wear What is Wear? Written by: Steffen D. Nyman, Education Coordinator, C.C.JENSEN A/S It is generally recognized that contamination of lubricating and hydraulic oils are the primary cause of wear and component

More information

Mack T-12 EGR Engine Oil Test. Report Packet Version No. Conducted For

Mack T-12 EGR Engine Oil Test. Report Packet Version No. Conducted For Report Packet Version No. Conducted For V = I = N = Valid; The Reference Oil/Non-Reference Oil was evaluated in accordance with the test procedure. Invalid; The Reference Oil/Non-Reference Oil was not

More information

6.7L Diesel Fuel System Service Tips

6.7L Diesel Fuel System Service Tips General Service Bulletin (GSB): This GSB targets the diagnosis, inspection and repair of the 6.7L diesel fuel system. Some 6.7L diesel vehicles may experience drivability concerns due to fuel system failures.

More information