HYDRAULIC SERIES METERING PUMPS
|
|
- Asher Marsh
- 6 years ago
- Views:
Transcription
1 HYDRAULIC SERIES METERING PUMPS
2 HYDRAULIC DIAPHRAGM Pump S O L U T I O N S Neptune Chemical Pump Company is a premier manufacturer of chemical metering pumps, chemical feed systems, and chemical injection accessories. Neptune s hydraulic diaphragm metering pumps are well-known for injecting chemicals into boilers and cooling towers, and in water and wastewater-treatment applications. Major markets include power generation, oil and gas exploration, petrochemical, and irrigation. Other Neptune products include make-down systems to prepare and activate liquid or dry polymers for injection into water and wastewater-treatment processes, plus a complete line of portable mixers. Neptune Chemical Pump Company, Inc., is located in North Wales, Pennsylvania, and is a member of the Pumps Solutions Group (PSG ), part of the Dover Corporation s Fluid Solution Platform. INDUSTRIES SERVED Neptune provides chemical injection, chemical and meteringpump solutions for a vast array of industries requiring the accuracy, precision and quality only Neptune can deliver. INDUSTRIAL WATER TREATMENT AGRICULTURE MUNICIPAL WATER TREATMENT AIR POLLUTION CONTROL CHEMICAL PROCESSING POWER GEN OIL & GAS PRODUCTION GAS ODORIZATION CHEMICAL FEED PETRO CHEMICAL BOILER TREATMENT ing PULP & PAPER SPORTS TURF CHEMIGATION GOLF COURSE 2 FERTIGATION
3 Sizing and Selecting Metering Pumps Identify the required capacity in terms of flow rate and discharge pressure. Do not oversize a metering pump. A metering pump should be sized so the maximum expected flow rate is % to 90% of the pump capacity. This leaves additional capacity if needed. The minimum capacity should never be less than % of the pump capacity to maintain accuracy. Consider materials of construction. Metering pumps are available in a variety of materials. Selection must take into consideration corrosion, erosion or solvent action. Solvent-based chemicals may dissolve plastic-headed pumps. Acids and caustics may require stainless steel or alloy liquid ends. Consider the effect of erosion when handling abrasive slurries. Is the chemical viscous or is the chemical a slurry? Does the chemical release gas? Special liquid ends are available for these specific applications. Standard metering pumps handle clear liquids with viscosities ranging from water-like to 1,0 cps. Special liquid ends can handle viscosities to 5,000 cps and light suspensions. For true slurries or higher viscosity, tubular diaphragm heads allow pumping chemicals to 20,000 cps or slurries containing up to % solids. Liquid ends are available which automatically vent accumulated gases. Neptune offers four materials of construction for its Hydraulic Series pumps: Material TEMPERATURE PRESSURE ºF (ºC) to 3,000 (207 ) ºF (ºC) to 3,000 (207 ) 1ºF (52ºC) to 400 (28 ) 1ºF (52ºC) to ( ) Kynar and models, 1 F (52 C) maximum. Nomenclature HYDRAULIC series pump data sheet X X X - X - N X MATERIAL OF CONSTRUCTION PUMP STYLE GEAR SPEED PISTON SIZE PUMP SERIES PISTON SIZE 0 = 1/2" 1 = 1/2" 2 = /16" 3 = 1-1/16" 4 = 1-3/16" 5 = 2" 6 = 5/16" DIA DIA DIA DIA DIA DIA DIA GEAR SPEED (Based on 17 RPM Motor) (60Hz) (Hz) 0 = 37 SPM 0 = 30 SPM 1 = 18 SPM 1 = 2 = 72 SPM 2 = 60 SPM 5 = 7 SPM 5 = 98 SPM 7 = SPM 7 = 120 SPM 8 = 175 SPM 8 = SPM PUMP STYLE A = Simplex - Non-Removable, oil head cannot be converted to Duplex D = Duplex E = Economy Head on A Gear Box SE or DE = Used on Model 547 only to specify E-Head on Simplex or Duplex S = Simplex - Removable, or head can be converted to Duplex T = Tubular; Designation DT for Duplex Tubular VS = High Viscosity; Designation DVS for Duplex High Viscosity MATERIAL OF CONSTRUCTION 3 = Trim, Viton O-Rings, Teflon Diaphragm 4 =, Viton O-Rings, Teflon Diaphragm 6 =, Glass Ball Check, Viton O-Rings, Teflon Diaphragm 7 = with (3) Poly Check Balls, Viton Diaphragm (Tubular Only) 8 =, Teflon Diaphragm 3
4 Variable Oil By-pass stroke adjustment allows better valve performance than variable linkage designs. The valve checks have extra time to seat even in heavy liquids since they are idle during the by-pass portion of the suction and discharge strokes. How It Works Hollow piston 1 reciprocates within a cylinder. Metering rod 2 fits into the piston. Note the front of the piston, or nose, has a reduced diameter. The liquid seal forms at 3 where the full diameter of the piston contacts the cylinder. When the piston moves forward, oil by-passes over the reduced nose, through port 4 to the center of the piston and back to the gearbox. As the piston continues forward, port 4 is blocked by the tip of the metering rod 2 stopping the by-pass. Oil is now pushed through port 5 to the diaphragm. Internal relief valve protects pump and motor. Hydraulically balanced Teflon diaphragm eliminates diaphragm stress associated with mechanically flexed units. Antisiphon spring provides back pressure when pumping against low pressure Power train operates in oil for extended service. 6 EZE-CLEAN Valves Cartridges can be removed for cleaning without disturbing the piping to the pump. Adjustable while running through 0% of range by micrometer dial. Vent Refill mechanism operates once per stroke Turning the micrometer dial moves the metering rod and changes the pump capacity. When the metering rod is moved in, the tip of the metering rod closes port 4 sooner in the stroke allowing for less by-pass and more pumping action. Likewise, when the metering rod is moved out, the tip of the metering rod closes port 4 later in the stroke allowing more by-pass and less pumping. The motion of the piston pushes and pulls the hydraulic fluid through port 5, into and out of the diaphragm chamber. The action of the fluid pushes and pulls the diaphragm which, in turn, pushes and pulls chemical through port 6. The action of the check valves controls the direction of the liquid.
5 Automatic Control & Other Features Neptune Hydraulic Series pumps feature a number of automatic control and other features. These features include: CE Mark-IEC Motors All Hydraulic Series pumps are CE-compliant and bear the CE label when coupled to a CE-marked motor. Motor options are available in IEC configurations. Double Diaphragm with Leak Detection For use in applications where contamination of the process fluid by the pump s hydraulic fluid cannot be tolerated. Features two dry coupled diaphragms that keep the area between the diaphragms evacuated with the pumping action transmitted without the use of intermediate fluids. Sodium Hypochlorite Gas Bleed This is a special head that has been designed with an automatic air-release valve that allows the venting of accumulated gas produced by chemicals that off-gas, such as sodium hypochlorite. Electric Stroke Control Automatically controls the flow rate of any Hydraulic Series pump by changing the stroke length either manually or through the use of a process instrument (4-20MA or 1-5V). It is a self-contained system and mounted directly on the pump. Variable Speed Control The flow rate of any Hydraulic Series pump can be controlled automatically by a process instrument using a variable speed drive that changes the pump s stroke speed. 5
6 481/1-LV Series 481/1-LV SERIES (Low Volume) Features Simplex or duplex design Double ball-check design Variable Oil By-pass stroke adjustment EZE-CLEAN Valves have cartridges that can be removed for cleaning without disturbing the pump s piping Engineered to deliver accurate flow rates at low volumes Injection rates as low as quarts/liters per day for special applications Handles high discharge pressures to 3,000 (206.9 ) Optional automatic control via electric stroke adjustment Explosion-proof motors available for hazardous atmospheres Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Technical Data construction:,, Diaphragms: Teflon Valve Body & Seats:,, Valve Checks:, Alloy 20, Glass Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: 60 lb. (27.2 kg) Performance Data Capacity at 0 (60 Hz): 0.2 to 0.5 ( to 2 ); 0.4 to 1 (2 to 4 ) if duplexed Capacity at 7 ( Hz): 0.16 to 0.4 (0.61 to 1.5 ); 0.32 to (1 to 3.0 ) if duplexed imum pressures to 3,000 (207 ) imum Temperatures: 1ºF (52ºC);, ºF (ºC) Gear speeds available at 60 Hz: 18 strokes per minute Certifications & Associations 6
7 Hydraulically Actuated "Diaphragm Pumps" 481/1-LV SERIES (Low Volume) DIA-PUMP DIMENSIONS SERIES with metal head 21-1/4" [540] MAX. " MAX [4] ELECTRIC STROKE CONTROL (OPTIONAL) 1 2-1/2" [63] /2" [63] 16-1/2" [420] 5-3/8" [137] 4-1/2" [4] 6" [152] 6" [152] 6" [152] 8-5/8" [220] 1-1/4" [32] STANDARD MOTOR " 4" 481/1-LV 3-7/8" [98] 3-7/8" [98] TYP. 2-1/4" [56] 2-1/4" [56] TYP. FLANGE MOUNT MOTOR 6" [152] 8-5/8" [220] 3-7/8" [98] 3-7/8" [98] TYP. 2-1/4" [56] 2-1/4" [56] TYP. DUPLEX 481/1-LV SERIES (Low Volume) SELECTION CHART Standard Motor Capacity at 00 (60 Hz) Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz 1,0 1, Weight Hz F Not Applicable in Hz C Lbs Kg Simplex Not Applicable in Hz Duplex Not Applicable in Hz Not Applicable in Hz Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company Hastelloy C is a registered trademark of Haynes International Note: head pumps satisfactory for temperatures to 1ºF (52ºC). Note: Special materials available for services not compatible with glass. 7
8 0-S Series 0-s SERIES Features Simplex or duplex design Engineered for fluids with viscosities to 1,0 cps* Double ball-check design Variable Oil By-pass stroke adjustment EZE-CLEAN Valves have cartridges that can be removed for cleaning without disturbing the pump s piping Ten-turn micrometer dial calibrated to 1% increments Color-contrasted dial protected from corrosion by clear covering Stroke mechanism moves only when adjusted, eliminating wear Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Pumps operating at strokes per minute for use with water-like chemicals only. * Technical Data construction:,, Diaphragms: Teflon Valve Body & Seats:,, Valve Checks:,, Glass Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: pounds/31.8 kg (with standard motor; add 20 pounds for flange-mounted motor and 15 pounds if duplexed) Performance Data Capacity at 0 (60 Hz): 1 to 30 (4 to 4 ); 2 to 60 (8 to 227 ) if duplexed Capacity at 7 ( Hz): to (3 to 95 ); 1.6 to (6 to 189 ) if duplexed imum pressure to 3,000 (207 ) imum Temperatures: 1ºF (52ºC);, ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 7 and strokes per minute Gear speeds available at Hz: 30, 60, 98, and 120 strokes per minute Certifications & Associations 8
9 0-S Hydraulically Actuated "Diaphragm Pumps" 0-S SERIES DIA-PUMP DIMENSIONS SERIES with metal head 21-1/4" [540] MAX. " MAX [4] ELECTRIC STROKE CONTROL (OPTIONAL) 1 2-1/2" [63] 16-1/2" [420] 5-3/8" [137] 4-1/2" [4] STANDARD MOTOR 6" [152] 8-5/8" [220] 1-1/4" [32] 6" [152] 3-7/8" [98] 3-7/8" [98] TYP. 2-1/4" [56] 2-1/4" [56] TYP. FLANGE MOUNT MOTOR with head 21-1/4" [540] MAX. 21-1/4" [540] MAX. " MAX [4] ELECTRIC STROKEELECTRIC STROKE CONTROL (OPTIONAL) CONTROL (OPTIONAL) " MAX [4] 5-3/8" [137] 3-5/8" [92] 16-1/2" 16-1/2" [420] [420] 1-1/4" [32] 1-1/4" [32] 5-3/8" 4-1/2" [137] [4] 4-1/2" [4] 3-5/8" [92] 1 8-5/8" [220] 1 7-1/8" [181] 7-1/8" [181] 7-1/8" [181] 7-1/8" [181] 8-5/8" [220] 4-5/8" [7] 4-5/8" [7] 4-5/8" [7] TYP. 4-5/8" [7] TYP. 1-7/8" [48] 1-7/8" [48] 1-7/8" [48] TYP. 1-7/8" [48] TYP. FLANGE MOUNT MOTOR STANDARD MOTOR Dimensions are approximate. Specifications subject to change without notice. * 0-S SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) S Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg , , Optional Motor** 1/2 HP , Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company is a registered trademark of Arkema Inc. Note: head pumps satisfactory for temperatures to 1ºF (52ºC). Note: Special materials available for services not compatible with glass. **For metallic heads only. 9
10 0-D Series 0-D SERIES Features Duplex design Engineered for fluids with viscosities to 1,0 cps* Double ball-check design Variable Oil By-pass stroke adjustment EZE-CLEAN Valves have cartridges that can be removed for cleaning without disturbing the pump s piping Ten-turn micrometer dial calibrated to 1% increments Color-contrasted dial protected from corrosion by clear covering Stroke mechanism moves only when adjusted, eliminating wear Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Pumps operating at strokes per minute for use with water-like chemicals only. * Technical Data construction:,, Diaphragms: Teflon Valve Body & Seats:,, Valve Checks:,, Glass Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: pounds (38.6 kg) Performance Data Capacity at 0 (60 Hz): 1 to 60 (4 to 228 ) Capacity at 7 ( Hz): to (3 to 189 ) imum pressures to 3,000 or 207 imum Temperature: 1F (52ºC);, ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 177 and strokes per minute Gear speeds available at Hz: 30, 60, 98 and 120 strokes per minute Certifications & Associations
11 0-D Hydraulically Actuated "Diaphragm Pumps" 0-D SERIES DIA-PUMP DIMENSIONS SERIES with metal head 21-1/4" [540] MAX. -1/4" 0] MAX. " MAX. [4] " MAX. 2-1/2"[4] [63] 16-1/2" [420] 16-1/2" [420] 8-5/8" [220] 2-1/2" 6"[63] [152] 1-1/4" [32] ELECTRIC STROKE CONTROL (OPTIONAL) 4-1/2" [4] 5-3/8" [137] 1-1/4" [32] 2-1/4" [56] 3-7/8" [98] 3-7/8" [98] TYP. 3-7/8" [98] TYP. 2-1/4" [56] 2-1/4" [56] TYP. 2-1/4" [56] TYP. 4-1/2" [4] 5-3/8" [137] 6" [152] 8-5/8" [220] 3-7/8" [98] CTION 2" NPT 6" [152] 6" [152] STANDARD MOTOR DUPLEX with head 21-1/4" [540] MAX. 21-1/4" [540] MAX. " MAX [4] " MAX [4] 3-5/8" [92] NPT 1/2" 16-1/2" [420] 3-5/8" [92] 7-1/8" [181] 16-1/2" [420] 4-5/8" [7] 5-3/8" [137] 1-1/4" ELECTRIC[32] STROKE CONTROL (OPTIONAL) 4-1/2" [4] 1-7/8" [48] 5-3/8" [137] 7-1/8" [181] 7-1/8" [181] 8-5/8" [220] 8-5/8" [220] 7-1/8" [181] 1-1/4" [32] 4-1/2" [4] 4-5/8" [7] 4-5/8" [7] TYP. 4-5/8" [7] TYP. 1-7/8" [48] 1-7/8" [48] TYP. 1-7/8" [48] TYP. STANDARD MOTOR DUPLEX Dimensions are approximate. Specifications subject to change without notice. * 0-D SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) D Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg , , Optional Motor** 1/2 HP , Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company is a registered trademark of Arkema Inc. Note: head pumps satisfactory for temperatures to 1ºF (52ºC). Note: Special materials available for services not compatible with glass. **For metallic heads only.
12 0-A Series 0-A SERIES Features Simplex pump Engineered for fluids with viscosities to 1,0 cps Double ball-check design Variable Oil By-pass stroke adjustment EZE-CLEAN Valves have cartridges that can be removed for cleaning without disturbing the pump s piping Ten-turn micrometer dial calibrated to 1% increments Color-contrasted dial protected from corrosion by clear covering Stroke mechanism moves only when adjusted, eliminating wear Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Technical Data construction:,, Diaphragms: Teflon Valve Body & Seats:,, Valve Checks:,, Glass Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: 60 pounds (27.2 kg) Performance Data Capacity at 0 (60 Hz): 1 to 18 (4 to 68 ) Capacity at 7 ( Hz): to 15 (3 to 57 ) imum pressures to 1,0 (76 ) imum Temperatures: 1ºF (52ºC);, ºF (ºC) Gear speeds available at 60 Hz: 37, 72 and 7 strokes per minute Gear speeds available at Hz: 30, 60 and 98 strokes per minute Certifications & Associations 12
13 0-A Hydraulically Actuated "Diaphragm Pumps" 0-A SERIES DIA-PUMP DIMENSIONS EXCEPT kynar models (code n8)* SERIES with metal head STANDARD MOTOR FLANGE MOUNT MOTOR with head (N5) Dimensions are approximate. Specifications subject to change without notice. * See Bulletin DP-0E for (N8) 0-A SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) A Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg , , Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company is a registered trademark of Arkema Inc. Note: head pumps satisfactory for temperatures to 1ºF (52ºC). Note: Special materials available for services not compatible with glass. 13
14 0-E Series 0-E SERIES Features Economy pump head with single ball-check design Engineered for fluids with viscosities to 1,0 cps Cost-efficient alternative to packed-plunger pumps Variable Oil By-pass stroke adjustment Ten-turn micrometer dial calibrated to 1% increments Color-contrasted dial protected from corrosion by clear covering Stroke mechanism moves only when adjusted, eliminating wear Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock Optional automatic control via electric stroke adjustment and variable speed drives Built in internal relief valve Hydraulically balanced diaphragm provides extended life Technical Data construction:,, Diaphragms: Teflon Valve Body & Seats:,, Valve Checks:, Glass, Ceramic Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: 59 to 65 pounds (26.8 to 29.5 kg); pounds (38.6 kg) if duplexed Performance Data Capacity at 0 (60 Hz): to 30 (3 to 3 ) Capacity at 7 ( Hz): 0.7 to 15 (3 to 57 ) imum pressures to 1,0 (76 ) imum Temperatures:, 1ºF (52ºC); ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 7 and strokes per minute Gear speeds available at Hz: 30, 60, 98 and 120 strokes per minute Certifications & Associations 14
15 0-E Hydraulically Actuated "Diaphragm Pumps" 0-E SERIES DIA-PUMP DIMENSIONS SERIES " MAX. STANDARD MOTOR 15-1/2" 2-1/2" 3/8" NPT CONNECTION 1-7/16" CONNECTION HEIGHT INCREASES TO 20" FOR MOTOR OPTIONS REQUIRING FLANGE ADAPTOR. 3-5/8" 7-3/8" 3/8" NPT CONNECTION (3) 3/8" DIA. MOUNTING HOLES 7/8" (2) REAR MOUNTING HOLES 1-3/4" 3/4" 7/8" 5-3/8" (2) REAR MOUNTING HOLES 1-5/16" 0-E-N3 () models CONNECTION 1-3/4" 1-5/16" 0-E-N5 () models 0-E-N8 (kynar) models head assemblies N3 head assembly n5 and n8 head assembly 0-E SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) E Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg , Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company is a registered trademark of Arkema Inc. Note: head pumps satisfactory for temperatures to 1ºF (52ºC). Note: Special materials available for services not compatible with glass. 15
16 0-VS Series 0-Vs SERIES Features Accurately handle viscous fluids, such as polymers, up to 5,000 cps Simplex or duplex models available Variable Oil By-pass stroke adjustment Standard flat diaphragm Large internal porting Single-ball suction check valve Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Technical Data construction: Diaphragms: Teflon Valve Body & Seats: Valve Checks: Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: pounds (31.6 kg) Performance Data Capacity at 0 (60 Hz): 2 to 30 (8 to 4 ); 4 to 60 (15 to 226 ) if duplexed Capacity at 7 ( Hz): 1.7 to (6 to 95 ); to (13 to 189 ) if duplexed imum pressures to 0 (48 ) imum Temperature: ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 7 and strokes per minute Gear speeds available at Hz: 30, 60, 98 and 120 strokes per minute Certifications & Associations 16
17 0-VS Hydraulically Actuated "Diaphragm Pumps" 0-VS SERIES DIA-PUMP DIMENSIONS SERIES with metal head 9-1/8" 5-3/8" 9-1/8" 5-3/8" 24" 24" 2-1/4" 2-1/4" 19-1/2" 19-1/2" -1/8" -1/8" 1-1/4" 3-1/2" 3/4" NPT 3-1/2" 3/8" X 5/8" SLOT (REAR) 3/4" NPT 1-1/4" 1/2" 1/2" X 5/8" 3/8" DIA.SLOT HOLES (2) 3/8" (REAR) (REAR) DIA. HOLES STANDARD MOTOR (2) 3/8"(REAR) 4-5/8" 6-1/8" 4-5/8" 6-1/8" FLANGE MOUNT MOTOR 0-VS SERIES SELECTION CHART VS Standard Motor Capacity at 00 (60 Hz) Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz Weight F C Lbs Kg 32 17
18 0-T Series 0-T SERIES Features Engineered for viscous fluids up to 20,000 cps Simplex or duplex design Can handle medium slurries with up to % solids Double ball-check design Variable Oil By-pass stroke adjustment Straight-through flow pattern eliminates pockets where slurries can settle Standard double diaphragm Standard double-ball suction and discharge valves; single-ball valve optional Elastomer tube shape and memory reduce NPSH requirements Spring-loaded discharge does not require external back pressure valve Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief Technical Data construction: Diaphragms: Viton Valve Body & Seats: Valve Checks: or polyurethane Standard motor: -1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: 80 to 95 pounds (36.2 to 43.1 kg) Performance Data Capacity at 0 (60 Hz): 2 to 80 (8 to 303 ) Capacity at 7 ( Hz): 1.7 to (6 to 95 ) imum pressures to (21 ) imum Temperature: ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 7 and strokes per minute Gear speeds available at Hz: 30, 60, 98 and 120 strokes per minute Certifications & Associations 18
19 0-T Hydraulically Actuated "Diaphragm Pumps" 0-T SERIES DIA-PUMP DIMENSIONS 21" [535] 3-1/8" [79] 21"-1/4" [535][260] MAX. -1/4" [260] MAX. ELECTRIC STROKE CONTROL ELECTRIC STROKE CONTROL 20" [8] 16-1/2" A A A A 3/4" NPT 1-1/4" [32] 4-1/2" [4] 1-1/4" [32] 5-3/8" [137] (TYP.) 4-1/2" [4] (3) 3/8" DIA. MOUNTING HOLES 5-3/8" [137] STANDARD MOTOR ALL models B (TYP.) (3) 3/8" DIA. MOUNTING HOLES 3/4" NPT C (TYP.) B 3/4" NPT (TYP.) C 3/4" N SUCTIO 0 series models with "falp" 3-7/8" NPT [99] 3-1/8" [79] 3/4" NPT 3/4" NPT 3/4" DISCHA 3/4" NPT 20" [8] 16-1/2" 3-7/8" NPT [99] 3/4" NPT 3/4" NPT SERIES 3-7/8" NPT [99] 3-1/8" [79] 20" [8] 16-1/2" A A 3/4" NPT (3) 3/8" DIA. MOUNTING HOLES (TYP.) C (TYP.) B 3/4" NPT 560 series models with flange adaptor 0-A SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) T Capacity at ( Hz) Optional Motor 1/2 HP Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg
20 560-S Series 560-S SERIES Features Simplex or duplex design Variable Oil By-pass stroke adjustment EZE-CLEAN Valves have cartridges that can be removed for cleaning without disturbing the pump s piping (available only on or models) Ten-turn micrometer dial calibrated to 1% increments Color-contrasted dial protected from corrosion by clear covering Stroke mechanism moves only when adjusted, eliminating wear Piston powered through complete stroke length at all capacities, eliminating stress, wear and shock Optional automatic control via electric stroke adjustment and variable speed drives Built-in internal relief valve Hydraulically balanced diaphragm provides extended life Technical Data construction:,,, Diaphragms: Teflon Valve Body & Seats:,,, Valve Checks:,, Glass Standard motor: 1/2 HP-1ph-5 VAC-60c-TEFC International motor: 0. kw-1 or 3ph- Hz-IEC or optional custom motors available Shipping weight: pounds/31.8 kg (with standard motor; add 20 pounds for flange-mounted motor) Performance Data Capacity at 0 (60 Hz): 40 to 80 (152 to 304 ); 80 to 160 (304 to 608 ) if duplexed Capacity at 7 ( Hz): 33.2 to 66 (126 to 2 ); 66 to 133 (2 to 5 ) if duplexed imum pressures to 3 (24 ) imum Temperatures:, 1ºF (52ºC);, ºF (ºC) Gear speeds available at 60 Hz: 37, 72, 7 and strokes per minute Gear speeds available at Hz: 30, 60, 98 and 120 strokes per minute Certifications & Associations 20
21 560-S Hydraulically Actuated "Diaphragm Pumps" 560-S SERIES DIA-PUMP DIMENSIONS SERIES with metal head 21-3/4" 21-3/4" [553] MAX. [553] MAX. 16-1/2" 16-1/2" [420] [420] -1/4" MAX. -1/4" MAX. [260] [260] 8-5/8" [220] ELECTRIC ELECTRIC STROKE CONTROL STROKE CONTROL (OPTIONAL) (OPTIONAL) 3/4" NPT 3/4" NPT 5-3/8" [137] 1-1/4" [32] 1-1/4" [32] 5-3/8"4-1/2" [137] [4] 4-1/2" [4] 3-5/8" [] 3-5/8" [] 4-1/2" [4] 5-3/4" [146] MOTOR CENTERMOTOR CENTER 1-5/8" [42] 18-3/4" [477] 1-5/8" [42] 1-1/4" NPT 1-1/4" NPT 5-3/4" [146] 9-3/4" [248] 8-5/8" [220] STANDARD MOTOR 4-1/2" [4] (3) 3/8" [9] DIA. (3) 3/8" [9] DIA.18-3/4" MOUNTING HOLES MOUNTING HOLES [477] 5-1/4" [133] 5-1/4" [133] 2-1/4" [57] 2-1/4" [57] BOLT HOLE LOCATIONS BOLT HOLE LOCATIONS 1-1/4" NPT 1-1/4" NPT 9-3/4" [248] 1/2" [13] 1/4" [6] FLANGE MOUNT MOTOR 1/2" [13] 1/4" [6] 3-1/2" [89] 3-1/2" 3-1/2" [89] [89] 2-3/8" [60] 2-3/8" [60] (1) 3/8" X 5/8"(1) 3/8" X 5/8" SLOT (FRONT) SLOT (FRONT) (2) 3/8" DIA. (2) 3/8" DIA. HOLES (REAR) HOLES (REAR) 3-1/2" [89] Dimensions are approximate. Specifications subject to change without notice. * with head (3) 3/8" [9] DIA. MOUNTING HOLES 4-1/2" [4] 3-5/8" [] MOTOR CENTER 1-5/8" [42] 18-3/4" [477] 1-1/4" NPT 5-3/4" [146] 9-3/4" [248] 5-1/4" [133] 2-1/4" [57] 1-1/4" NPT 1/2" [13] BOLT HOLE LOCATIONS 1/4" [6] 2-3/8" [60] 3-1/2" [89] 3-1/2" [89] (1) 3/8" X 5/8" SLOT (FRONT) (2) 3/8" DIA. HOLES (REAR) 560-S SERIES SELECTION CHART Standard Motor Capacity at 00 (60 Hz) Capacity at ( Hz) Pressure of the Series Temp Strokes/ute 60 Hz Hz F Weight C Lbs Kg Simplex Optional Motor 1/2 HP Optional Motor 3/4 HP Optional Motor 1 HP Duplex Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company Note: head pumps satisfactory for temperatures to 1ºF (52ºC). is a registered trademark of Arkema Inc. Note: Special materials available for services not compatible with glass. 21
22 600/6000 Series 600/6000 SERIES FEATURES Designed for high-pressure, high-volume applications Simplex or duplex models available Variable Oil By-pass stroke adjustment Hydraulically balanced Teflon diaphragm eliminates stress EZE-CLEAN valves are removable without disturbing piping Optional electronic positioners or variable speed drives available for automatic capacity control Power train operates submerged in oil for extended service Pump capacity is adjustable via micrometer dial while pump is running or stopped Engineered for fluids with a viscosity to 1,000 cps Available with Totally Enclosed Fan Cooled (TEFC), Explosion Proof (EXP) and Chemical Plant Severe Duty (CPSD) motor enclosures TECHNICAL DATA construction:,,, Diaphragms: Teflon Valve Body & Seats:,,, Valve Checks:,, Ceramic Motor Options: 60 Hz: 1/2 HP, 3/4 HP, 1 HP, 1-1/2 HP, 2 HP Hz: 0.37 kw, 0.55 kw, 0.75 kw, 1.12 kw, 1.5 kw PERFORMANCE DATA Capacity (60 Hz): 7 (26.5 ) to 240 (908 ) Capacity ( Hz): 22 to 754 imum pressures to 4,000 (281.5 ) imum Temperature: -1ºF (52ºC);, ºF (ºC) Certifications & Associations 22
23 Hydraulically Actuated "Diaphragm Pumps" 600/6000 SERIES DIA-PUMP DIMENSIONS 600/6000 SERIES MODELS 60/6/62 ( HEADS) MODELS 635/637 ( & HEADS) MODEL 647 ( & HEADS) MODELS 635/637/647 ( & KYNAR HEADS) MODELS 635/637 ( & KYNAR) MODEL 647 (ALL MATERIALS) Dimensions are approximate. Specifications subject to change without notice. * 600/6000 SERIES SELECTION CHART High Low imum Pressure Capability Pressure/Horsepower Piston Diameter inches (mm) Strokes Per 1/2 HP 3/4 HP 1 HP 1-1/2 HP 2 HP ute at 60 Hz ( Hz) 60 Hz Hz 60 Hz Hz 60 Hz Hz 60 Hz Hz 60 Hz Hz () () () () () () () () () () High (63.5) (120) Low (.4) 58 (48) High (63.5) (120) Low (58.8) 7 (98) High 2. (63.5) (120) Low 2.00 (.8) 7 (98) High 2. (63.5) (120) Low 2.00 (.8) 7 (98) c /6000 * is a registered trademark of Arkema Inc. 1 (28) 0 (7) () () (89) (160) (7) (160) (7) (158) (0) (22) (7) (22) (6.5) (21) (6) (19) () (160) (7) (160) (7) (158) (0) () (130) (412) (130) (412) (129) (409) (240) (760) 14 (4.5) (14) (240) (760) 14 (126) (399) () () () () () () () () (240) (240) (240) (240) (160) (130) (160) (130) (7) (412) (7) (412) () () () () () () () () () () () () () () () () (760) (760) (760) (760) 23
24 HYDRAULIC SERIES SELECTION CHARTS 481 & 1 SERIES SELECTION CHART Model Number imum (1) 0 (7 kg/cm²) Strokes Per ute imum Pressure (2) 481-S-N3 0.2 (0.75 ) 4.8 gpd (17.8 lpd) 18 0 (5 1-S-N1 1-S-N3 1-S-N4 1-S-N5 0.5 (1.9 ) 12.0 gpd (44.0 lpd) 18 0 (5 0 (2 1/2 HP Cast Iron and models, 1 F (52 C) maximum. 0-S SERIES SELECTION CHART Model Number 24 Capacity at 0 (7 Bar) 60 Hz ( Hz) 0-s-n3 0-s-n4 0-s-n5 (0.7) 3.0 (2.5) 515-s-n3 515-s-n4 515-s-n5 3.0 (2.5) 520-s-n3 520-s-n4 520-s-n5 Pressure 1/4 HP (0.18 kw) or (0. kw) Motor Pressure 1/2 HP (0.37 kw) Motor* and models, 1 F (52 C) maximum. Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) Style Shipping Weight lbs (kg)** (12.) 37 (31) Simplex.3 (9.4) (12.) 7 Simplex 2.0 (1.7) 7.5 (6.3) (17.45) 37 (31) Simplex 522-s-n3 522-s-n4 522-s-n5 4.0 (3.3) 15.1 (12.6) (17.45) 72 (60) Simplex 5-s-n3 5-s-n4 5-s-n5 7.0 (5.8) 26.5 (22.1) (17.45) 7 Simplex 530-s-n3 530-s-n4 530-s-n5 5.5 (4.6) 2 (17.3) (26.97) 37 (31) Simplex 532-s-n3 532-s-n4 532-s-n5.0 (9.2) 41.6 (34.7) (26.97) 72 (60) Simplex 535-s-n3 535-s-n4 535-s-n (15.0) (56.7) (26.97) 7 Simplex 537-s-n3 537-s-n4 537-s-n (18.3) (69.2) (26.97) (120) Simplex 547-s-n3 547-s-n4 547-s-n5 547-s-n (.0) (94.2) (30.15) (120) Simplex
25 0-A SERIES SELECTION CHART Model Number Capacity at 0 (7 Bar) 60 Hz ( Hz) 0-a-n3 0-a-n4 0-a-n5 () 3.7 (3.1) 515-a-n3 515-a-n4 515-a-n5 3.0 (2.5) 520-a-n3 520-a-n4 520-a-n5 imum Pressure and models, 1 F (52 C) maximum. Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) Shipping Weight lbs (kg)*** (12.) 37 (31) 60 (27).3 (9.4) (12.) 7 60 (27) 2.0 (1.7) 7.5 (6.3) (17.45) 37 (31) 60 (27) 522-a-n3 522-a-n4 522-a-n5 4.0 (3.3) 15.1 (12.6) (17.45) 72 (60) 60 (27) 5-a-n3 5-a-n4 5-a-n5 7.0 (5.8) 26.5 (22.0) (17.45) 7 60 (27) 530-a-n3 530-a-n4 530-a-n5 5.5 (4.6) 2 (17.3) (26.97) 37 (31) 60 (27) 532-a-n3 532-a-n4 532-a-n5.0 (9.2) 41.6 (34.7) (26.97) 72 (60) 60 (27) 535-a-n3 535-a-n4 535-a-n (15.0) (56.8) (26.97) 7 60 (27) 547-s-n (.0) (94.2) (30.15) (120) 0-e SERIES SELECTION CHART Model Number Capacity at 0 (7 Bar) 60 Hz ( Hz) 5-e-n3* 5-e-n5* 5-e-ar* 5-e-n8* (0.7) 3.0 (2.5) 515-e-n3 515-e-n5 515-e-ar 515-e-n8 3.0 (2.5) 520-e-n3 520-e-n5 520-e-n8 imum Pressure and models, 1 F (52 C) maximum. Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) Shipping Weight lbs (kg)*** 0.0 (12.) 37 (31) 59 (27) Hypochlorite (9.4) Hypochlorite (12.) 7 59 (27) 2.0 (1.7) 7.5 (6.2) (17.40) 37 (31) 59 (27) 522-e-n3 522-e-n5 522-e-ar 522-e-n8 4.0 (3.3) 15.1 (12.5) Hypochlorite (17.40) 72 (60) 59 (27) 5-e-n3 5-e-n5 5-e-ar 5-e-n8 7.0 (5.8) 26.5 (22.0) Hypochlorite (17.40) 7 59 (27) 527-e-ar 8.6 (7.1) 32.0 (26.6) Hypochlorite (17.40) (9) 59 (27) 532-e-n3 532-e-n5 532-e-n8.0 (9.1) 41.6 (34.5) 3 62 (27.00) 72 (60) 59 (27) 535-e-n3 535-e-n5 535-e-n (14.9) (56.4) 3 62 (27.00) 7 59 (27) 547-se-n3 547-se-n (24.9) (.8) (30.) (9) 65 (30) 547-de-n (24.9) (.8) ea. head each (30.) (9) (39)
26 HYDRAULIC SERIES SELECTION CHARTS Continued 0-vs SERIES SELECTION CHART Model Number 515-vS-N3 520-vS-N3 522-vS-N3 5-vS-N3 530-vS-N3 532-vS-N3 535-vS-N3 537-vS-N3 547-vS-N3 Capacity at 0 (7 Bar) 60 Hz ( Hz) 3.0 (2.5) 2.0 (1.7) 4.0 (3.3) 7.0 (5.8) 5.5 (4.6).0 (9.1) (14.9) 22.0 (18.3) 30.0 (24.9).3 (9.4) 7.5 (6.2) 15.1 (12.5) 26.5 (22.0) 2 (17.3) 41.6 (34.5) 68.0 (56.4) 83.0 (68.9) 3.0 (.8) imum Pressure * and models, 1 F (52 C) maximum. Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) Shipping Weight lbs (kg)*** 0.0 (12.7) (17.4) (17.4) (17.4) 62 (27.0) 62 (27.0) 62 (27.0) 62 (27.0) 7 37 (31) 72 (30) 7 37 (31) 72 (30) 7 (9) (30.1) (9) 0-T SERIES SELECTION CHART Model Number 26 Capacity at 0 (7 Bar) 60 Hz ( Hz) imum Pressure and models, 1 F (52 C) maximum. Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) Shipping Weight lbs (kg)*** 515-T-N3 515-T-N7 3.0 (2.5).3 (9.4) (12.7) 7 80 (36) 520-T-N3 520-T-N7 2.0 (1.7) 7.5 (6.2) (17.4) 37 (31) 80 (36) 522-T-N3 522-T-N7 4.0 (3.3) 15.1 (12.5) (17.4) 72 (30) 80 (36) 5-T-N3 5-T-N7 7.0 (5.8) 26.5 (22.0) (17.4) 7 80 (36) 530-T-N3 530-T-N7 5.5 (4.6) 2 (17.3) (27.0) 37 (31) 80 (36) 532-T-N3 532-T-N7.0 (9.1) 41.6 (34.5) (27.0) 72 (30) 80 (36) 535-T-N3 535-T-N (14.9) (56.4) (27.0) 7 80 (36) 547-T-N3* 547-T-N7* (24.9) (.8) (27.0) (9) 80 (36) 562-T-N3 562-T-N (33.2) (1.3) (.8) 72 (30) 95 (43) 565-T-N3 565-T-N (54.0) (204.2) (.8) 7 95 (43) 567-T-N3 567-T-N (66.4) (2.7) (.8) (9) 95 (43)
27 560-S SERIES SELECTION CHART Model Number Capacity at 0 (7 Bar) 60 Hz ( Hz) Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) and models, 1 F (52 C) maximum. Pressure/Horsepower (0. kw)* 1/2 HP (0.37 kw)* 3/4 HP (0.55 kw)* 1 HP (0.75 kw)* Style Shipping Weight lbs. (kg)* 562-S-N3 562-S-N4 562-S-N5 562-S-N (33.3) (1.8) 2.0 (.80) 72 (60) Simplex (39) 565-S-N3 565-S-N4 565-S-N5 565-S-N (54.2) (205.0) 2.0 (.80) Simplex (39) 567-S-N3 567-S-N4 567-S-N5 567-S-N (66.7) (1.7) 2.0 (.80) (120) Simplex (39) ORDERING INFORMATION When ordering, please include the following information: 1. Description of liquid to be pumped. Include chemical name, concentration, viscosity, ph and temperature of solution. 2. imum, normal and minimum pump capacity required. 3. Discharge pressure required. 4. Suction conditions. 5. Motor characteristics required. 27
28 HYDRAULIC SERIES SELECTION CHARTS Continued 600/6000 SERIES SELECTION CHART Model Number imum Pressure Capability and models, 1 F (52 C) maximum. Pressure/Horsepower Piston Diameter inches (mm) Strokes Per ute at 60 Hz ( Hz) 1/2 HP 3/4 HP 1-1/2 HP 2 HP Hz () 60 Hz () Hz () 60 Hz () Hz () 60 Hz () Hz () 60 Hz () Hz () 60-N (19.05) 58 (48) 1 (7) 82.8 (22) 0 (7) 138 (22) 20 (6.5) 172 (21) 30 (6) 241 (19) 4000 (4.5) 276 (14) 6-N (19.05) 7 (98) 00 (15) 69.0 (47) 0 (15) 3 (46) 0 (14) 138 (44) 0 (13) 207 (41) 30 (12.5) 241 (40) 62-N (.4) 7 (98) 0 (28) 34.5 (89) 800 (28) 55 (89) 00 (28) 69 (89) 0 (27.5) 3 (87) 0 (26) 138 (82) 635-N (.8) 7 (98) 2 (130) 16 (412) 275 (130) 19 (412) 4 (129) 29 (409) 600 (126) 41 (399) 635-N4 c (.8) 7 (98) 2 (130) 16 (412) 275 (130) 19 (412) 4 (129) 29 (409) 600 (126) 41 (399) 635-N5 pvc 2.00 (.8) 7 (98) (130) (412) 635-N (.8) 7 (98) (130) (412) 637-N (.8) (120) 2 (160) 16 (7) 275 (160) 19 (7) 4 (158) 29 (0) 600 (154) 41 (488) 637-N4** c (.8) (120) 2 (160) 16 (7) 275 (160) 19 (7) 4 (158) 29 (0) 600 (154) 41 (488) 637-N5 pvc 2.00 (.8) (120) (160) (7) 637-N8** 2.00 (.8) (120) (160) (7) 647-N (63.5) (120) (240) 14 (760) 647-N4** c (63.5) (120) (240) 14 (760) 647-N5 pvc 2. (63.5) (120) (240) (760) 647-N8** 2. (63.5) (120) (240) (760) 600/6000 SERIES MOTOR SELECTION CHART 28 1 HP 60 Hz () 600/6000 SERIES MATERIALS OF CONSTRUCTION Enclosure Phase Voltage 1/2 HP 3/4 HP 1 HP 1-1/2 HP 2 HP Part Code N3 Code N4 Code N5 Code N8 tefc 1 5/ Liquid Head c-20 pvc tefc 3 230/ Diaphragm Teflon Teflon Teflon Teflon exp 1 5/ Valve Body & Seat c-20 pvc exp 3 230/ Valve Checks c-20 Ceramic Ceramic cpsd 1 5/ "O"-rings Viton Viton Viton Viton cpsd 3 230/ Teflon is a registered trademark of E.I. du Pont de Nemeurs and Company is a registered trademark of Arkema Inc. Viton is a registered trademark of E.I. du Pont de Nemeurs and Company
29 ACCESSORIES Injection Quills Used to inject chemicals pumped by metering pumps into turbulent-flow zone of high-pressure water or steam lines. Pulsation Dampeners Operating pressures to 3,000 (207 ) Remove the pulsating flow caused by a pump s reciprocating action, ensuring a smooth, laminar flow. Spring-loaded check valve Equipped with pressure gauge and Available in,, and Available in 1/2" and 3/4" NPT charging valve Pressure ratings to 1,000 (69 ) with 4:1 safety margin Corporation Stops Used for rapid injection and dispersion of chemicals pumped into tanks, mains, cooling towers and process systems without the need to shut down the system. Operating pressures to ( ) Available in,, and Available in 1/2" through 1 NPT or AWWA EZE-Grab Platforms For portable pump installations, molded polyethylene base provides elevated platform for use indoors or outdoors. Handles allow the pump to be moved easily Lever-operated stop and protection chain standard Available with choice of Bronze or Back Pressure Valve & Pressure Relief Valves By-Pass Feeders Ensure the set pressure is maintained at the pump outlet port to assure accurate metering and prevent siphoning, while protecting against overpressure. Used to introduce chemicals into closed circulating-wwater systems. Available in,, Standard high-pressure cap rated to and PTFE diaphragm Dish bottom in or dish bottom out models available Filter bags available in 1-, 5-, 20- and -micron ratings Calibration Columns A fast, easy, economical way to check the flow rate of a chemical metering pump. with slip-on caps for top filling and easy cleaning Shielded-glass available for acid and strong chemical applications Mylar lamination for protection against harsh chemicals 0-4,000 ml capacity (dual scales) Nimble Skid Pump Packages Complete metering systems ready to use with any bulk or intermediate bulk chemical container. Available in 18" x 30" and 24" x 46" footprints Can be used with electronic or motor-driven diaphragm pumps Containment available for all systems Sample Coolers Cools hot water and steam samples for easy handling and sample collection. Available in all with Inconel, and or carbon steel with tubing Available in 3,0 (241 ) at 7 F (399 C) and 1,0 (3 ) at 600 F (316 C) design pressures is a registered trademark of Arkema Inc. Inconel is a registered trademark of Special Metals Corporation 30-Gallon i-tank For use with any hydraulic or electric metering diaphragm pump. Available with or without containment 29
30 OTHER PRODUCTS OFFERED Polymer Blend & Feed Systems PZ Series Electronic Metering Pumps PZ Series pumps from Neptune are ideal for chemical dosing, chlorine sterilization and nutrient injection applications. They meet the needs of these types of applications thanks to their stateof-the-art control and programmable features, including speed adjustment from 1 to strokes per minute, which allows for more uniform distribution at all feed rates. The pumps are waterproof and UV-resistant, and unaffected by voltage fluctuations from 94 to 264 VAC and /60 Hz. Chemical Feed Systems Neptune s chemical feed systems are offered with or without containment, and are a complete turnkey solution to all chemical feed needs, no matter how large or small. Neptune also offers By-Pass and Filter Feeders for boiler treatment, Bromine Feeders for cooling tower treatment and Glycol Feeders for chilled and hot water loops. Neptune chemical feed systems are also completely customizable to meet all end-user requirements. Neptune s Polymaster Polymer Blend & Feed system thoroughly dilutes, mixes and activates emulsion, dispersion and solution polymers. The key to the Polymaster s operation is the patented Gatlin Distribution Head that hydraulically segments the polymer into ultra-thin platelets. This segmentation maximizes the amount of the polymer s surface area that is exposed to the dilution water, which optimizes activation and is unaffected by fluctuating water pressures or dilution-water ratio changes. Portable Mixers The Neptune Mixer Company offers and manufactures a complete line of portable top-entering mixers, which are ideal for blending liquids, suspending or dissolving solids, dispersing immiscible liquids, and dispersing small amounts of gases in liquids, making them highly reliable in waste treatment, water treatment, and batch chemical preparation applications. The pumps can be clamp- or base-mounted on beams, tank walls, or other supports. Fluid Dynamics Incorporated in 1974 and acquired by Neptune in 4, Fluid Dynamics is a market leader in polymer-blending technology for use in the water and wastewater, agriculture, oil and gas, and mining industries. Its dynablend polymer-blending technology was patented in 19 as a revolutionary non-mechanical polymer-blending system. More than years and thousands of dynablend installations later, Fluid Dynamics remains a premier polymer equipment company. dynablend dynajet dynablend miniblend Liquid Polymer Blending System DRY Polymer PREPARATION System 30 DRY POWDER PREPARATION System Liquid Polymer Blending System
31 Notes 31
32 Your Distributor: 295 DeKalb Pike North Wales, PA Phone: Toll Free: NEPTUNE Fax: G&W Industrial Sales 915 Emerson Avenue Parkersburg, WV Printed in the U.S.A. Copyright 20 Neptune NPT-001-C-01
HYDRAULIC SERIES METERING PUMPS
HYDRAULIC SERIES METERING PUMPS www.neptune1.com HYDRAULIC DIAPHRAGM Pump SOLUTIONS Neptune Chemical Pump Company is a premier manufacturer of chemical metering pumps, chemical feed systems, and chemical
More informationMETERING PUMPS. PORTABLE MIXERS (Gear Driven & Direct Drive) POLYMER BLEND SYSTEMS (Fluid Dynamics)
METERING PUMPS PORTABLE MIXERS (Gear Driven & Direct Drive) POLYMER BLEND SYSTEMS (Fluid Dynamics) www.neptune1.com SERVING YOUR NEEDS SINCE Neptune is a premier manufacturer of chemical metering pumps,
More informationSolutions Applications
Expert Solutions for Critical Applications BRAND Portfolio W h e r e I n n o v a t i o n www.neptune1.com F l o w s. Hydraulic Metering Pumps Mechanical Metering Pumps Electronic Metering Pumps Portable
More informationMechanical Diaphragm Metering Pump
Mechanical Diaphragm Metering Pump sales@novatech-usa.com www.novatech-usa.com Tel: (866) 433-6682 Fax: (866) 433-6684 Tel: (281) 359-8538 Fax: (281) 359-0084 Pulsafeeder Expertise Since 1936, Pulsafeeder
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Mechanical Diaphragm Metering Pump
An IDEX Water & Wastewater Business pulsafeeder.com Mechanical Diaphragm Metering Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation
More informationPULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP API-675 ENGINEERED PRODUCTS. Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar)
PULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar) Temperature: up to 275 F (135 C) Viscosity: up to 1,000 cps API-675 ENGINEERED PRODUCTS PULSAPRO
More informationPULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP API-675 ENGINEERED PRODUCTS. Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar)
PULSAPRO HYDRAULIC DIAPHRAGM METERING PUMP Flow: up to 270 gph (1,022 lph) Pressure: up to 5,100 psi (350 bar) Temperature: up to 275 F (135 C) Viscosity: up to 1,000 cps API-675 ENGINEERED PRODUCTS PULSAPRO
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-03 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationmroy Series Hydraulic Diaphragm Metering Pumps
mroy Hydraulic Diaphragm Metering Pumps The mroy series of metering pumps have provided users with high performance and reliability since its introduction in 1962. Enhanced and improved over the years,
More informationDIAPHRAGM METERING PUMPS
JANUARY 2004 DIAPHRAGM METERING PUMPS JN Series 5 Models 1-7 GPH MF Series 11 Models 5-75 GPH MH Series 5 Models 96-180 GPH Simple, Rugged and Accurate Designed For Continuous Heavy Duty Service Manufacturing,
More informationChemical Feed System & Metering Pump Specifications for General Use
Chemical Feed System & Metering Pump Specifications for General Use Introduction: This guide specification is presented to assist the writer in specifying chemical metering pumps or complete packaged chemical
More informationSeries PZ Pulse Metering Pumps
BULLETIN PZ- 22 Series PZ Pulse Metering Pumps Manual or programmable A single model accepts either pulse or milliamp signals Operates on any single-phase voltage from 94 vac through 264 vac Pump delivery
More informationProMinent ProMus Hydraulic Diaphragm Metering Pumps
Overview: ProMus High pressure chemical process metering (see page 131 for spare parts) The ProMus is a motor driven metering pump with a hydraulically actuated diaphragm. The drive case and the hydraulic
More informationEncore 700 Diaphragm Metering Pump
Encore 700 Diaphragm Metering Pump Precise Metering, Robust And Reliable Years of Continued Service The Encore 700 diaphragm metering pump combines the robustness of hydraulic diaphragm pumps with the
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-3 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Electronic Metering Pump
An IDEX Water & Wastewater Business pulsafeeder.com Electronic Metering Pump Pressure (PSI) Pressure (BAR) Pulsafeeder Expertise Technology is the key to delivering responsible products to the markets
More informationENCORE 700 DIAPHRAGM METERING PUMP
HEAVY DUTY METERING PUMPS WITH CONTROL FLEXIBILITY The Encore 700 Diaphragm Metering Pump combines the robustness of hydraulic diaphragm pumps with the unparalleled economy, simplicity, and serviceability
More informationMaterials of Construction Head materials in PVDF, 316 SS, and PP Ball Valves - Ceramic, and 316 SS Diaphragm - PTFE faced Hypalon.
Pulsafeeder Technology Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation in chemical dosing. Pulsafeeder has built a foundation of success with thousands of
More informationElectronic Metering Pump
Electronic Metering Pump Pressure (PSI) Pressure (BAR) Pulsafeeder Expertise Technology is the key to delivering responsible products to the markets that we serve. Leading the way in the development of
More informationPortable Mixers MIXER COMPANY CATALOG MC-10. A Division of Neptune Chemical Pump Company
Portable Mixers CATALOG MC-10 MIXER COMPANY A Division of Neptune Chemical Pump Company Introduction / Mixer Selection Portable Mixers from Neptune Mixer Company A Division of Neptune Chemical Pump Company
More informationPULSA GLM ENGINEERED PRODUCTS. Mechanical Diaphragm. Max Flow: to 3,200 LPH (845 GPH) Pressure: 12 bar (175 psi) Temperature: 0-45 C ( F)
ENGINEERED PRODUCTS Max Flow: to 3,200 LPH (845 GPH) Pressure: 12 bar (175 psi) Temperature: 0-45 C (32-113 F) Accuracy: +/- 2% of Set Point PULSA GLM Mechanical Diaphragm Metering Pump Mechanical Diaphragm
More informationTaking care of the world s water. Wallace & Tiernan Products Chemtube 2000 Hydraulic Diaphragm Metering Pump
Taking care of the world s water. Wallace & Tiernan Products Chemtube 2000 Hydraulic Diaphragm Metering Pump OVERVIEW The Chemtube 2000 Metering Pump is the latest arrangement of a long and experienced
More informationJaeco AgriPumps for Chemigation
Jaeco AgriPumps for Chemigation A Better Way to Farm Designed to Meet Rugged Ag Pivot System Applications Jaeco Metering (Injection) AgriPumps Serving Farmers for over Fifty-Five Years For over fifty-five
More informationWATER PROCESS SOLUTIONS
WATER PROCESS SOLUTIONS Chemtube 000 Tubular Diaphragm Metering Pump Robust & Reliable Chemical Metering The Chemtube 000 tubular diaphragm metering pump is hydraulically actuated and features a rugged,
More informationDiaphragm & Peristaltic Metering Pump
Diaphragm & Peristaltic Metering Pump Pressure (BAR) Pulsafeeder Expertise Since 1936, Pulsafeeder, Incorporated has been the recognized leader in fluids handling, electronic pump controllers and systems
More informationMacRoy. Series of Metering Pumps
MacRoy Series of Metering Pumps MacRoy Series The MacRoy Series of metering pumps offer traditional Milton Roy reliability with outstanding value for applications up to psi ( Bar). Milton Roy has combined
More informationMilroyal C. PD 3661 Effective 6/2009. MilRoyal C
Milroyal C Milroyal C Pumps Milroyal C DUPLEX with HPD Liquid End GENERAL SPECIFICATIONS Drive Polar crank design all moving parts sub merged in oil. Front end scavenging The plunger always set to top
More informationSeries PZ / PZi / PZiG
BULLETIN PZ- 8 Series PZ / PZi / Pulse Metering Pumps US Patent #6,283,717 The Power of Intelligent Pumps Expands! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 (programmable) Features MANUAL EXTERNAL
More informationDSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance
G A and G M series DOSING PUMPS / DSD Technology Up to 11.95 l/h and 70 bar / Product advantages DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance NEW Plunger
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Hydraulic Diaphragm Metering Pump
An IDEX Water & Wastewater Business pulsafeeder.com Hydraulic Diaphragm Metering Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluid handling technology and innovation
More informationProMinent Meta METERING PUMPS. ProMinent
ProMinent Meta METERING PUMPS ProMinent Compact design Easy operation and control Pump Types The ProMinent Meta is an adjustable, reciprocating positive displacement metering pump. The Meta- HM diaphragm
More informationChemical and Petrochemical Process
Seal-less Pump Technology Chemical and Petrochemical Process Rugged reliability with precision Chemical and Petrochemical Industry Compact seal-less Hydra-Cell pumps for long life and high reliability.
More informationNPT Connection Sizes
imensions Approximate for envelope estimations. Certified prints are available. imensions are showing for both and Frames in inches. : 0-/ : -/ : -/ : -/ : -/ : -/ : -/ : -/ NPT Connection Sizes Frame
More informationTHE LEADING FORCE behind liquids TM since Rotary Positive Displacement Pumps
THE LEADING FORCE behind liquids TM since 1857 Rotary Positive Displacement Pumps External Gear 3600 Series General purpose pumps for transferring, mixing, blending and recirculating. Efficiently handles
More informationA CATALOUGE FOR MPH HYDRAULIC DIAPHRAGM METERING PUMP SIKO PUMP. Factory Warranty. Food & Beverage. Mining. Paints & Dyes.
Catalogue No. SIKO-MPH-003 A CATALOUGE FOR MPH HYDRAULIC DIAPHRAGM METERING PUMP 1 Full Year Factory Warranty Food & Beverage Mining Paints & Dyes Petrochemical Pharmaceutical Pulp & Paper Power & Energy
More informationPulsation Dampeners NEW! Wanner Engineering Inc
Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationDosing pump series G A
Dosing pump series G A Flow rate up to 170 l/h Pressure up to 12 bar Mechanically actuated diaphragm Variable eccentric drive mechanism Main technical characteristics Flow rate up to 170 l/h Pressure up
More informationMT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow
Maximum Flow Rate: Minimum Flow Rate: Maximum Pressure: 8.00 gph (30.28 lph) 0.06 gph (0.227 lph) 3500 psi (241 bar) MT8 with Stainless Steel pump head Hydra-Cell Metering Solutions pumps exceed API 675
More informationAODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS
AODD PUMPS FOR YOUR MOST SEVERE APPLICATIONS HEAVY DUTY FLAP VALVE PUMP HEAVY DUTY BALL VALVE PUMP CONTAINMENT DUTY BALL VALVE PUMP ENSURES YOUR SUCCESS SANDPIPER Signature Series AODD pumps are engineered
More informationTHE LEADING FORCE behind liquids since 1857
THE LEADING FORCE behind liquids since 1857 High Capacity Bulk Liquid Handling Pumps - For loading/unloading transport truck tankers, railway tank cars, and barges - High flow rate transfer capability
More informationMetering Pump Technology Bulletin 210 The Metering Pump...1 Metering Pump Basic Components...1 Metering Pump Characteristics...
Metering Pump Technology Bulletin 210 The Metering Pump....1 Metering Pump Basic Components....1 Metering Pump Characteristics....2 Capacity and Pressure Capabilities Chart...3 Liquid End Designs...4 Packed
More informationAMP Series. pulsa.com/periflo PERISTALTIC PUMPS. Flow: up to 282 GPM (1067 LPM) Pressure: up to 115 PSI (8 BAR)
ENGINEERED PRODUCTS Flow: up to 282 GPM (1067 LPM) Pressure: up to 115 PSI (8 BAR) Temperature: Product to 176 F (80 C) Ambient to 104 F (40 C) ChemTuff Series AMP Series FMP Series PeriFlo PERISTALTIC
More informationA Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer
THE LEADING FORCE behind liquids since 1857 A Series General Purpose Pumps General Purpose Pumps for Pressure Lubrication, Hydraulic Service, Fuel Supply and General Transfer The Roper Pump Family of Gear
More informationTel: (866) Fax: (866) Tel: (281) Fax: (281)
sales@novatech-usa.com www.novatech-usa.com Tel: () 4- Fax: () 4-4 Tel: () 9- Fax: () 9-004 Series The S & S metering pumps offer a high level of reliability with outstanding value for applications up
More informationProMinent Hydro Hydraulic Diaphragm Metering Pumps
ProMinent Hydro Hydraulic Diaphragm Metering Pumps ProMinent Hydro Hydraulic Diaphragm Metering Pumps NEW hydraulic motor driven metering pumps provide precise and safe metering for high pressure applications.
More informationIdentity code: Meta MTMa Diaphragm Metering Pumps Series: Meta diaphragm-type metering pump Version a
Identity code: Meta MTMa Diaphragm Metering Pumps MTMa Series: Meta diaphragm-type metering pump Version a H A Main drive Add-on drive Pump version: New Cross Reference Conversion Table from former version
More informationTexsteam Pumps Precise chemical injection pumping. Texsteam Pumps
Texsteam Pumps Precise chemical injection pumping Texsteam Pumps 2 With a wide range of capacities and operating pressures, Dresser Natural Gas Solutions versatile Texsteam pumps can handle challenging
More informationPDF-A Electromagnetic metering pumps. EHN series
PDF-A 0045-03 Electromagnetic metering pumps EHN series The latest electromagnetic metering pump equipped with digital controller & multi-voltage EHN Series is the latest electromagnet drive & diaphragm
More informationFybroc Vertical Turbine Pumps
FYBROC SERIES 8500 FIBERGLASS CONSTRUCTION FOR CORROSIVE APPLICATIONS Fybroc Vertical Turbine Pumps B U L L E T I N 8 5 B 1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc,
More informationReciPro Liquid Metering Pumps. Reproducible flow rates High pressure capabilities Corrosion resistant Remote control options
ReciPro Liquid Metering Pumps Reproducible flow rates High pressure capabilities Corrosion resistant Remote control options ReciPro HP Series Eldex metering pumps can be used wherever precise flow rate
More informationCA-NV AWWA 2013 Fall Conference. Chemical Metering Pump, Accessories and Systems. By Richard Hopkins Hopkins Technical Products, Inc
CA-NV AWWA 2013 Fall Conference Chemical Metering Pump, Accessories and Systems. By Richard Hopkins Hopkins Technical Products, Inc Mathematics Equation #: 1 for Chlorine Flow(MGD) x Dosage(mg/l) x 3.785/gal
More informationPolymer Makedown Systems
Polymer Makedown Systems Pulsafeeder Expertise Technology is the key to delivering responsible products to the markets that we serve. Leading the way in the development of metering technologies, Pulsafeeder
More informationHEAVY DUTY FLAP VALVE PUMPS For Fluids Containing up to Line Size Solids
HEAVY DUTY FLAP VALVE PUMPS For Fluids Containing up to Line Size Solids A WARREN RUPP, INC. BRAND SANDPIPERPUMP.COM KEY ADVANTAGES OF SANDPIPER FLAP VALVE PUMPS AN IDEAL SOLUTION FOR ABRASIVE SLURRIES,
More informationCALL GRIFFCO CHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA PH: +1 716 835-0891 FAX: +1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL 1-800 - GRIFFCO BACK PRESSURE VALVES Griffco M & G-Series
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationProducts for Oil & Gas Production TEXSTEAM PUMPS
Products for Oil & Gas Production TEXSTEAM PUMPS Introduction Dresser offers a broad range of pneumatically and electrically driven chemical pumps designed to pump chemicals in precise amounts. Our complete
More informationCHEMICAL PUMP ACCESSORIES
Griffco Valve Inc. 6010 N. Bailey Ave., Suite 1B Amherst, NY 14226 USA Phone: 1 716 835-0891 Fax: 1 716 835-0893 CHEMICAL PUMP ACCESSORIES CALL: 1 800 GRIFFCO BACK PRESSURE VALVES Griffco T & G-Series
More informationThis family of Mechanically Actuated Diaphragm metering pumps is designed for durability and cost effectiveness.
Series The S & S metering pumps offer a high level of reliability with outstanding value for applications up to psi ( Bar). LMI has combined heavy-duty industrial drive technology with state-of-the-art
More informationHydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. PL Series Plunger Metering & Process Pumps
An IDEX Water & Wastewater Business pulsafeeder.com PL Series Plunger Metering & Process Pumps Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluid handling technology and
More informationCentrac B PD 3151 Revised 3/2013 CENTRAC B PUMPS
GENERAL SPECIFICATIONS Drive Helical Gear and Scotch Yoke (all moving parts submerged in oil) Liquid End High Performance Diaphragm (hydraulically balanced) Multiplexing Simplex or Duplex Maximum Performance
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised experts
More informationNOVAPLEX Integral. Process Diaphragm Pumps
NOVAPLEX Integral Process Diaphragm Pumps Flexible high performance p for high flow rates and press NOVAPLEX Integral pumps are powerful process diaphragm pumps for a variety of applications. They are
More informationDosaSkid Turnkey and ready-to-use device
2 types of plug-and-play dosing solutions: Frame-mounted pump(s) Chemical injection package with storage tank Compact, modular and selfcontained metering solutions. DosaSkid are ideal for preparing, storing
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Non-Metallic External Gear Pump
An IDEX Water & Wastewater Business pulsafeeder.com Non-Metallic External Gear Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluid handling technology and innovation
More informationM E T E R I N G P U M P S
P U M P S M E T E R I N G ProMinent ProMinent Makro TZ A Multi-Functional Trio: High Performance Along with High Capacity! Metering range of up to 2100 l/h ProMinent Makro TZ motorised metering pumps are
More informationFLEX-PRO TM PERISTALTIC PUMPS
FLEX-PRO TM PERISTALTIC PUMPS Applications Chemical Wastewater treatment Chlorination Pulp & Paper Slurries Printing inks Oil based fluids Gaseous fluids Shear sensitive fluids Caustics Chemical Slurries
More informationExcel AD Electromagnetic dosing pump
Flow rate Up to 7.6 l/h Pressure Up to 17.3 bar Liquid ends Acrylic, stainless steel, PP, PVC, PVDF, designed for viscous products, designed for degassing products LCD user interface with display of the
More informationmotor driven metering pumps
motor driven metering pumps DIAPHRAGM ACTUATED TYPE www.fwtsystems.it motor driven dosing pumps diaphragm type Welcome to FWT Dosing Systems FWT (Fluid and Water Technology) is a company formed with specialised
More informationNOVADOS Metering Pumps
NOVADOS Metering Pumps NOVADOS A Selection of Metering Pumps Beyond Compare Bran+Luebbe offers you an unrivalled range of metering pumps for practically every situation where liquids have to be metered
More informationPiston Metering Pump REKOS KR
MB 08 02 / General Rekos pumps can be supplied as simplex piston metering pumps type KR and duplex piston metering pumps type ZKR. Advantages of piston metering pumps are: minor dependency on back pressure
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationMetering Pump.
Metering Pump www.emoclewpumps.com Professional Metering Pump Manufacturer Quality Emoclew America is manufactured strictly to ISO standard API675 standard is also available Target Become a creative and
More informationHusky 515 / 716 Air-Operated Diaphragm Pumps
First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak
More informationThe Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP ProMinent Modular design allows selection of the features you need Three diaphragm sizes
More informationInk Manufacturing and Printing Solutions
Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality
More informationPhone: Fax: Toll Free: PUMP ACCESSORIES
PUMP ACCESSORIES BALL CHECK VALVES Plainsman Ball Check Valves Reliable, field proven check valves. Metal to metal seats Simple design makes it easy to install and maintain, with only two moving parts
More informationCondensed Catalog. Seal-less Pumps
Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement
More informationOptional Accessories. Loss of Water Flow Switch. Loss of Polymer Flow Switch. Polymer Flow Transmitter. Remote Level Control. Stainless Steel Piping
Emulsion Blending System POLYFEEDER Pulsafeeder Technology Since 1936, Pulsafeeder has been the global leader in fl uid handling technology and innovation in chemical dosing. As a single source system
More informationWILROY. Operation. Optional Diaphragm Rupture Detection HYDRAULICALLY ACTUATED DIAPHRAGM PUMP
WILROY ATEX Approved HYDRAULICALLY ACTUATED DIAPHRAGM PUMP Williams and Milton Roy have combined technologies to design a pump blending the proven mroy hydraulic by-pass diaphragm design with the Williams
More informationONYX VALVE. Pressure Isolator Ring. New Patented Design Assures Accuracy and Maintenance-Free Operation Patent #5,708,201
ONYX VALVE Pressure Isolator Ring New Patented Design Assures Accuracy and Maintenance-Free Operation Patent #5,708,201 The Onyx Isolator Ring Outperforms Conventional Isolator Rings and Standard Diaphragm
More informationAquaMatic Control Valves, Stagers and Controllers
Pentair Water is a leader in high technology flow control products and provides innovative solutions for commercial and industrial applications. AquaMatic valves, stagers and controllers are key components
More informationUNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
More informationModel T25 Triplex Power Pump
weatherford Model t25 triplex power pump Model T25 Triplex Power Pump Pump and Fluid Systems Weatherford s Model T25 is a single-acting, triplex plunger pump rated at 23 HP in continuous duty service and
More informationPRIMEROYAL Series Metering Pumps
an Accudyne Industries brand PRIMEROYAL Series Metering Pumps The Force in Pump Technology PRIMEROYAL Series Metering Pumps A history of reliability With over 80 years of experience, Milton Roy combines
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
More informationModel T10 Triplex Power Pump
Weatherford s Model T10 is a single-acting triplex plunger pump rated at 10 HP in continuous duty service and up to 16 HP in intermittent duty. This versatile pump is offered with a variety of material
More informationNOVADOS Metering Pumps
NOVADOS Metering Pumps NOVADOS A superlative selection of Metering Pumps Bran+Luebbe offers you an unrivalled range of metering pumps for practically every situation where liquids have to be metered and
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationFLOWMETERS PRODUCT OVERVIEW
FLOWMETERS PRODUCT OVERVIEW 2018 QSE MAG METER Non-Intrusive (No moving parts) Electromagnetic Flow Meter ELECTROMAGNETIC Turf / Irrigation Agriculture Irrigation Turf Irrigation Systems Micro Irrigation
More informationPeerless Pump FULL PRODUCT LINE. Brochure B Sterling Fluid Systems (USA), Inc.
Peerless Pump FULL PRODUCT LINE Sterling Fluid Systems (USA), Inc. Brochure B-1270 Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid
More informationAxial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Vertical close coupled single or multi-stage turbine pumps. Axial and Mixed Flow for Large Volume Pumping Vertical pumps for handling water in large volumes. Mixed flow
More informationIntegrated Vector-Type Pump Drive Product Group D and W
Integrated Vector-Type Pump Drive Product Group D and W Integrated Vector-Type Pump Drive seepex has released a new integrated drive for its popular lines of MD and BW progressive cavity pumps. The drive
More informationsolenoid driven diaphragm type metering pump
solenoid driven diaphragm type metering pump Affordable - Versatile - Durable The pump series covers a capacity range of 0.16 3.57 gph (0.6 13.5 l/h) at pressures 145 21 psig. Its compact construction
More informationAcrison Volumetric Feeders
Equipment Specifications 1-200-0011 Acrison Volumetric Feeders and Dissolving Systems Model W-105 Series For Dry Solid Materials Industrial and municipal chemical feed equipment. Acrison Volumetric Feeders
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More information