INSERTION Adapter/Fitting for analytical devices
|
|
- Cecilia Anabel Warner
- 6 years ago
- Views:
Transcription
1 INSERTION / for analytical devices Universal adapter/fitting for Type 8202 and 8222 measuring devices in pure, aggressive or polluted liquids Adaptation into standard piping systems or conversion of Bürkert S020 fittings to S022 fittings Type S022 can be combined with... ipe diameters from DN06 (with reduction) to DN110 (plastic) or bigger (stainless steel) Type 8202 Type 8222 ipe and fitting Saddle ph or O.R.. meter Resistive conductivity meter The adapter/fitting or measuring chamber is used to connect the compact analytical EEMENT measuring device into piping systems. Different versions of adapters/fittings are available: s: - VC-U adapter to stick into equal or reduced standard metric or ASTM Tee fitting - adapter to weld into equal d32 standard metric Tee fitting - Stainless steel adapter to weld - VC threaded adapter to screw on tank or pipe General data ipe diameter rocess Materials Seal Body & adapter Medium data Medium temperature Medium pressure (max.) DN06 (with reduction) to DN110 (plastic) or bigger (stainless steel) Solvent, fusion, welding, threaded and to connect with screws Metric or ASTM True union or weld ends; saddle VC,, stainless steel - delivered with 2 seals, 1 FKM and EDM VC&VC, &VC See pressure-temperature chart on next page. Temperature limits may depend on inserted measuring device 1). N10 (plastic) or N16 (metal). ressure limits may depend on inserted measuring device 1). - VC,, stainless steel adapter for conversion of S020 Bürkert fitting into S022 fitting. s in VC: - metric or ASTM Tee fitting True union weld end - saddle Environment Ambient temperature 1) lease refer to appropriate instruction manual or data sheet for more details. Temperature limits may depend on inserted measuring device 1). Standards, directives and approvals Directive - ressure Complying with article 3 of 3 from 97/23/CE directive.* * For the 97/23/CE pressure directive, the device can only be used under following conditions (dependent on max. pressure, pipe diameter and fluid). Type of fluid Conditions Fluid group 1, 1.3.a Fluid group 2, 1.3.a Fluid group 1, 1.3.b Fluid group 2, 1.3.b Only DN 25 DN 32, or DN > 32 and N*DN 1000 DN 25, or DN > 25 and N*DN 2000 DN 125
2 ressure / temperature chart ressure [bar] Temperature [ C] Note: Always take the lowest max. medium temperature of both adapter and used EEMENT measuring device. Adaptation overview / fitting S022 VC-U, metric or ASTM Stainless steel VC-U, G or NT 1 1 / 4 screw-on VC-U,, stainless steel for Bürkert fitting body iping systems Final products DN 32 to 110 (06 to 25 with reduction) Respect recommendations of installation Respect recommendations of installation Respect recommendations of installation 32 to 50 p. 2/8
3 Installation and recommendations For ph and OR measurements, we recommend a U - form bypass installation to ensure that the electrode is maintained in a wet condition and enable the customer to calibrate the unit without stopping the whole process or to use the special designed measuring chamber. The specially designed measuring chamber enables to install the measuring device in all pipe systems, either directly in the main stream or in a by-pass line. Additionally it enables to keep the electrode always wet and isolates it easily from the main stream for calibration purposes. ressure and temperature ratings must be respected according to the selected adapter material. Be sure that the sensor element is completely covered with liquid. Avoid dead legs which interfere the local fluid exchange. When mounting the adapter into a T-fitting, a tank or directly into a pipe, please ensure that the minimum immersion depth of the electrode is respected (refer to the under drawing). S022 used with 8202 ph/o.r.. meter S022 ipe min immersion depth S022 used with 8222 conductivity meter C = 0.01 or 0.1 S022 used with 8222 conductivity meter C = 1 S022 S022 ipe immersion depth 78 ipe min 19 min immersion depth p. 3/8
4 Dimensions for adapter/fitting S022 INSERTION adapter for into T-fitting or pipe Note: T-fitting to use for mounting the S022, shown in the opposite drawing Ø 32 d Metric solvent adapter VC-U / To stick on Tee fitting d32x32 or d40x32 with solvent socket Metric solvent adapter VC-U / To stick on Tee fitting d50x32 to d50-110x32 with solvent socket ASTM solvent adapter VC-U / To stick on Tee fitting 1 x1 to 3 x1 with solvent socket (0.67) 43 (1.69) Ø32 Ø42.2 Ø (0.179) Ø33.4 (1.315) Metric fusion adapter / To weld on Tee fitting d32x32 with fusion socket Metric welding Stainless steel / To weld directly on pipe Ø32 Ø42.2 Ø47 Ø33.7 Ø44.4 INSERTION adapter for on tank or pipe G 1 1 / 4 screw-on adapter VC-U / to screw on tank or pipe G1" 1/2 NT 1 1 / 4 screw-on adapter VC-U / to screw on tank or pipe G1" 1/ G 1" 1/4 NT 1" 1/4 p. 4/8
5 Dimensions for adapter/fitting S022 with metric solvent ends in VC G1 1/2'' ø 24.3 with ASTM solvent ends in VC G1 1/2" ø 24.3 ø d ø d1 ø d ø d1 H ±1 H ± DN H Standard 1 1 Ø d [inch] Ø d1 [inch] Metric ASTM Metric ASTM /2" 1" Metric ASTM /4" 1" Metric ASTM " Metric ASTM ¼" Metric ASTM ½" Metric ASTM " Metric ASTM ½" Metric ASTM " Metric ASTM with metric or ASTM true union with spigot and nut in VC H ±1 G1 1/2" ø 24.3 ø d DN H Standard Ø d [inch] Metric ASTM ½" Metric ASTM ¾" Metric ASTM " Metric ASTM ¼" Metric ASTM ½" Metric ASTM " p. 5/8
6 Dimensions for adapter/fitting S022 with saddle Body material & VC adapter EDM seal material H M±1 G1 1/2" ø 24.3 DN M H A Ø D ø d A to convert S020 T-fitting to S022 VC-U or / For Bürkert fitting body - DN32 or bigger Ø 24.3 Stainless steel / For Bürkert fitting body - DN32 or bigger Ø Measuring chamber Stainless steel G 1"1/ max. 45 G 1/2" 80,2 132 Ø 60,3 80 Ø ±2 p. 6/8
7 Ordering chart for adapter/fitting S022 Description Materials Body / Seal 1) Type of installation or DN Item no. Insertion adapter for into T-fitting or pipe Metric solvent adapter with G 1½ external threaded Metric solvent adapter with G 1½ external threaded VC-U / VC-U / To stick on Tee fitting d32x32 or d40x32 with solvent socket To stick on Tee fitting d50x32 to d50-110x32 with solvent socket ASTM solvent adapter with G 1½ external threaded VC-U / To stick on Tee fitting 1 x1 to 3 x1 with solvent socket Metric fusion adapter with G 1½ external threaded / To weld on Tee fitting d32x32 with fusion socket Metric welding adapter Ø 33.7 with G 1½ external threaded Insertion adapter for into T-fitting or pipe G 1¼ screw-on adapter with G 1½ external threaded Stainless steel / VC-U / To weld directly on pipe To screw on tank or pipe NT 1¼ screw-on adapter with G 1½ external threaded for conversion of S020 T-fitting to S022 T-fitting with G 1½ external threaded VC-U / VC-U / To screw on tank or pipe For Bürkert fitting body DN32 2) with G 1½ external threaded / For Bürkert fitting body DN32 2) with G 1½ external threaded INSERTION fitting for on pipe with metric solvent ends with G 1½ external threaded for EEMENT measuring device with ASTM solvent ends with G 1½ external threaded for EEMENT measuring device 1) 1 FKM and 1 EDM seals for the measuring device are supplied with each adapter. 2) or analytical true union fitting (DN15 - DN25) Stainless steel / VC / FKM VC / FKM For Bürkert fitting body DN32 2) p. 7/8
8 Ordering chart for adapter/fitting S022 Description Materials Body / Seal 1) Type of installation or DN Item no. Insertion fitting for on pipe Measuring chamber with metric true union with spigot and nut for pipe and with G 1½ external threaded for EEMENT measuring device with ASTM true union with spigot and nut for pipe and with G 1½ external threaded for EEMENT measuring device with saddle with G 1½ external threaded for EEMENT measuring device VC / FKM VC / FKM Body & VC adapter / EDM Measuring chamber with G 1½ external threaded for EEMENT measuring device Stainless steel ipe : G 1/ ) 1 FKM and 1 EDM seals for the measuring device are supplied with each adapter. Materials VC-C, VDF with FKM or EDM seal Ordering chart - accessories for adapter/fitting S022 (has to be ordered separately) 1 Metal adapter Number on Drawing Description Item no. lastic adapter, solvent end fittings and saddle lastic adapter for conversion, true union fitting ** 3 ** O-ring to use for holder with lug, Flat seal to use for holder with groove (old version) 2 Stopper in stainless steel with union nut and O-ring (EDM and FKM) Stopper in VC with union nut and O-ring (EDM and FKM) FKM O-ring set - for metal adapter EDM O-ring set - for metal adapter FKM O-ring set - for plastic adapter, solvent end fittings and saddle EDM O-ring set - for plastic adapter, solvent end fittings and saddle FKM O-ring set - for plastic adapter or true union fitting DN15 up DN FKM O-ring set - for plastic adapter or true union fitting DN FKM O-ring set - for plastic adapter or true union fitting DN EDM O-ring set - for plastic adapter or true union fitting DN15 up DN EDM O-ring set - for plastic adapter or true union fitting DN EDM O-ring set - for plastic adapter or true union fitting DN In case of special application conditions, please consult for advice. Subject to alteration. Christian Bürkert GmbH & Co. KG 1305/4_EU-en_ p. 8/8
INSERTION Adaptor for analysis
INSERTION Adaptor for analysis Type can be combined with... Universal adaptor for type 8202 and 8222 ELEMENT s in pure, aggressive or contaminated liquids Adaptation into standard piping systems or conversion
More informationInline Paddle Wheel Flow Switch
Inline addle Wheel Flow Switch Economic integration in pipe systems without any additional piping Magnetic measuring principle Mechanical adjustment of setpoint Type can be combined with... Valve Alarm
More informationINSERTION fitting for flow measurement or analysis
INSERTION fitting for flow measurement or analysis Type S020 can be combined with... Universal fitting for INSERTION sensors, transmitters, batch controllers in pure, aggressive or contamined liquids arge
More informationInductive conductivity meter
Inductive conductivity meter Type 8228 can be combined with... Configurable outputs: up to 2 transistor and up to 2 analog 4... 20 ma outputs Removable backlighted display Simulation of process values
More informationINLINE sensor-fitting with paddle wheel for flow measurement
INLINE sensorfitting with paddle wheel for flow measurement Type S030 can be combined for... 06 to 65 Closed pipe system, i.e. sensor included in fitting Quarterturn technology Transmitter available also
More informationINLINE fitting with paddle-wheel for flow measurement
INLINE fitting with paddlewheel for flow measurement 06 to 65 Closed pipe system, i.e. sensor inside fitting Quarterturn technology Type can be combined with... Electronics available for Indication, Monitoring,
More information2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationINSERTION flow sensor for continuous flow measurement
INSERTION flow sensor for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN)
More informationInductive conductivity meter
Inductive conductivity meter CIP version Type 8228 can be combined with... Standard version Perfect for concentrated liquids and wide conductivity range Pre-parameterized versions available for direct
More informationProbe holders for analytical probes
Probe holders for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationInsertion magnetic inductive flowmeter
Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041
More information2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 612 can be combined with... DN
More informationINLINE fitting with paddle-wheel for flow measurement
ININE fitting with paddlewheel for flow measurement Type can be combined with... N 06 to N 65 Closed pipe system, i.e. sensor inside fitting Quarterturn technology Electronics available for Indication,
More informationdisplay on the wall or in a panel away from the inline sensor SE30 for easy meter reading.
Analogue Flow Rate Indicator, DN 15...; PN 1...16 Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a large
More informationINSERTION flowmeter with paddle wheel, ELEMENT design
INSERTION flowmeter with paddle wheel, design Up to PN, size of measurement pipes: DN to DN400 Configurable outputs: one or two transistor output(s) and single or dual 4... ma analog output(s) Removable
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 8032 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable outputs (transistor or relay) Automatic-calibration:
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More informationPaddle-wheel flow controller with optical principle for On/Off control
Paddle-wheel flow controller with optical principle for On/Off control Type 8039 can be combined with... Indication, monitoring, transmitting and On/Off control in one device. Programmable s (transistor
More information2/2 or 3/2-way Miniature Rocker Solenoid Valve
2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationPositive displacement flowmeter
Positive displacement flowmeter Configurable outputs: one or two transistor output(s) and single or dual 4...20 ma current output(s) Removable backlit display of flow rate and/or 2 two totalized volumes
More informationPositive displacement flowmeter for continuous flow measurement
8070 Positive displacement flowmeter for continuous flow measurement High accuracy Medium with high viscosity Mounting and dismounting of the electronics by a quarter-turn Connection to Bürkert devices
More information2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid. Low dead volume, low internal volume. High chemical resistance
2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid Low dead volume, low internal volume High chemical resistance Low power consumption Internal contours easily flushed Optional impulse
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
More informationGEMÜ 205 Electrically operated solenoid valve
Electrically operated solenoid valve Features Hermetic separation between medium and actuator In case of power failure operation possible by manual override Standard integral optical position indicator
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More information2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
More informationConductivity meter. PLC Solenoid valve. Type Type On/Off Diaphragm valve. Valve islands
Conductivity meter Configurable outputs: two transistor and single or dual analog 4... 20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
More informationPositive displacement batch controller
8075 Batch controller Positive displacement batch controller Type 8075 can be combined with... Compact version for DN15 to DN100 Dosing On site calibration by Teach-In Check of input/output signals Total
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More informationFlow-Through Fitting ARF 215
Flow-Through Fitting ARF 215 Standard Models Model for Pressurized Sensors Latest Product Information: www.knick.de Warranty Defects occurring within 1 year from delivery date shall be remedied free of
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More information2/2 way Angle-Seat Valve for medium up to C, DN15-50
Type 2000 can be combined with 2/2 way Angle-Seat Valve for medium up to + 180 C, DN15-50 High flow rates Very high cycle life Clamp body according to EN ISO 2852, BS 4825 or ASME BPE For process valves
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationPaddle-wheel flow controller for On/Off control
Paddle-wheel flow controller for On/Off control Type 803 can be combined with... Indication, monitoring, transmitting and On/Off control in one device Programmable s (transistor or relay) Automatic-calibration:
More informationFlowmeter for Gases. Type Type can be combined with... Type 8802-YG Process control valve. Type 5281 Solenoid valve
Flowmeter for Gases Thermal mass flow measurement Pipe sizes up to 2" Integrated inlet and outlet pipes for flow conditioning -20mA signal output of process value Type can be combined with... Type 8802-YG
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationProcess ph / ORP Electrode Holder ProbFit CPA 463 S
Technical Information TI 5C/24/ae rocess ph / OR lectrode Holder robfit CA 463 S Retractable electrode holder for pneumatic operation with flushing chamber Measurement of ph and OR values under process
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way ngle-seat Valve with stainless steel design for media up to +180ºC, DN 13-50 Excellent control characteristic and high fl ow rates High cycle life Clean design for optimal use in hygienic environment
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information2/2-way Compact Solenoid Valve, G 1/4 - G 1/2
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationElectrical position feedback for actuator sizes Ø mm
Electrical position feedback for actuator sizes Ø 40-125 mm Type 1062 can be combined with Simple installation, convertible or retrofittable Self-adjusting trip cam for closed position LEDs provide local
More informationSchedule 80 PVC Industrial Products & Accessories True Union 2000 Industrial Ball Valves
True Union 000 Industrial Ball Valves Pressure Rating @ 7 F ( C), Water /" - " 5 psi " - 8" 50 psi All Flanged 50 psi Socket Style SR Threaded Style " Lever Handle Style PVC = 0 F (0 C) Rated for Vacuum
More informationDiaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
More informationFlow Switch Paddle Style Flow Switch IF3 1 1 N Paddle style flow switch. Dripproof/Rainproof type. (Equivalent to IP42)
Paddle Style [Option] Flow switches, series IF detect and confirm liquid, generally used in fields such as air conditioning, water supply equipment, etc. Piping sizes ranges from /4B to B. Wide range of
More informationFlow Fittings. for Electrochemical Sensors. B Operating Manual /
Flow Fittings for Electrochemical Sensors B 202810.0 Operating Manual 2014-05-14/00431662 Contents 1 Introduction......................................................5 1.1 Safety information.............................................................
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More informationFlow Fittings. for Electrochemical Sensors. B Operating Manual /
Flow Fittings for Electrochemical Sensors B 202810.0 Operating Manual 2013-06-12/0043166 Contents 1 Introduction......................................................5 1.1 Safety information.............................................................
More informationN086, N186, N786. Pressure retaining valve, Plastic
Pressure retaining valve, Plastic Construction The GEMÜ N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a
More informationFlow Switch Paddle Style Flow Switch. How to Order IF3 1 1 N Paddle style flow switch. Enclosure
Paddle Style For details about certified products conforming to international standards, visit us at www.smcworld.com. Flow switches, series IF detect and confirm liquid, generally used in fields such
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationSDR-26 (160 PSI) SDR-21 (200 PSI) SDR-17 (250 PSI) MINIMUM WALL (IN.) 20 LENGTH. 1.5" 1.900" N/A N/A N/A.090" ".419 lbs..415 lbs.
u ASTM D2241 PRESSURE PIPE Gasketed Pipe Specifications Northern Pipe Products ASTM D2241 IPS Pressure Rated Pipe is manufactured from compounds conforming to cell class 12454 in accordance with ASTM D1784.
More informationSolenoid valve type 150 direct action
Solenoid valve type 50 direct action Function closed when deenergized (NC) direct action Valve Function Switching function NC: In the position of rest, the valve is closed by the spring force. When energized
More informationDiaphragm valve, Plastic
Diaphragm valve, Plastic Construction The GEMÜ manually operated 2/2-way diaphragm valve has a low maintenance plastic bonnet. An optical position indicator is integrated as standard. Features Suitable
More informationFlowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
More informationJUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering
Data Sheet 22943 Page 1/9 JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Brief description The sensor detects the electrolytic conductivity of a process liquid.
More informationThermowell For sanitary applications Model TW61, for orbital welding
s For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 for further approvals see page 5 Applications Sanitary applications Food and beverage industry Bio and pharmaceutical
More informationMaterials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
More informationThermowell For sanitary applications Model TW61, for orbital welding
Temperature For sanitary applications Model TW61, for orbital welding WIKA data sheet TW 95.61 Applications for further approvals see page 5 Sanitary applications Food and beverage industry Bio and pharmaceutical
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationFlow Switch Paddle Style Flow Switch. How to Order IF3 1 1 N Paddle style flow switch. Dripproof/Rainproof type (Equivalent to IP42)
Series IF [Option] Flow switches, series IF detect and confirm liquid, generally used in fields such as air conditioning, water supply equipment, etc. Piping sizes ranges from /B to B. Wide range of applicable
More informationTechnical Information Cleanfit CPA451
TI00343C/07/EN/13.14 71266614 Products Solutions Services Technical Information Manually operated retractable assembly for water, wastewater and process media Application Industrial and communal waste
More informationHAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
More informationDiaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance plastic piston actuator which can be controlled by inert gaseous media. Normally Closed,
More informationJUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering
Data Sheet 22943 Page 1/9 JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Brief description The sensor detects the electrolytic conductivity of a process liquid.
More informationPneumatically operated zero dead volume T-Valve CLASSIC
Pneumatically operated zero dead volume T-Valve CLASSIC Zero dead volume body - no welds Hermetical separation of fluids from the operating mechanism by diaphragm Universal and robust actuators with modular
More informationR677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
More informationHigh Pressure Filter Pi 4230
High Pressure Filter 4230 Nominal pressure 315 bar (4570 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationCable Plug acc. to DIN EN , Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationPressure gauge per EN with mounted diaphragm seal With SMS threaded connection Model DSS19F
Pressure Pressure gauge per EN 837-1 with mounted diaphragm seal With SMS threaded connection Model DSS19F WIKA data sheet DS 95.21 Applications Hygienic pressure measurement in sanitary applications for
More informationFluid Control System with Diaphragm Valve For Polluted, Dirty, Aggressive and Ultra-Pure Fluids
TOP Control System / ON/OFF and Proportional /-Way, / Advantages/Benefits Decentralized Intelligence for ON/OFF and Proportional control of processes Customized System Solutions for Easy LINK and Easy
More informationIn-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More informationSpecial Containers Various applications such as collecting, mixing, storing or separating liquids or gases Page 867
10 Special Containers Various applications such as collecting, mixing, storing or separating liquids or gases Page 867 Barrel Pump For a safe tightening of wine barrels during the fermentation process
More informationPipe surface resistance thermometer, for clamping Model TR57-M, miniature design
Electrical temperature measurement Pipe surface resistance thermometer, for clamping Model TR57-M, miniature design WIKA data sheet TE 60.57 Applications Sanitary applications Food and beverage industry
More informationSilverLine S647, S660, S670. Diaphragm Valves, Plastic/Metal
Diaphragm Valves, Plastic/Metal Construction GEMÜ SilverLine is a range of simple yet robust plastic and metal diaphragm valves for the control of liquids and gases. Valve bodies are available in PVC-U,
More informationSignet 3719 ph/orp Wet-Tap Assembly
Signet 3719 ph/p Wet-Tap Assembly Features Electrode removal without process shutdown Space saving 45 mm (1.75 in.) short-stroke design Sealed pneumatic dampening for smooth and safe operation SafeLoc
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65
2/2-way Angle-Seat Control Valve with stainless steel design for media up to +185ºC, DN15-65 Excellent combination of good control characteristic and high fl ow rates High cycle life Clean design for optimal
More informationStrainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationPneumatic control unit for decentralized automation of ELEMENT process valves
890 Pneumatic control unit for decentralized automation of ELEMENT process valves Type 890 can be combined with... Compact design Integrated pilot valve with manual override Integrated control air routing
More informationHigh Pressure Filter Pi 410
High Pressure Filter Pi 410 Nominal pressure 315 bar (4480 psi), nominal size -63 1. Features High performance filters for modern hydraulic systems Provided for valve block installation Modular system
More informationMATERIALS. Polypropylene
68509.verB_1_3.P1.fh 4/17/07 12:15 PM Page 1 THERMOPLASTIC INDUSTRIAL PIPING SYSTEMS Asahi/America thermoplastic piping systems are designed for tough industrial applications. With our partner Agru of
More informationSITRANS P measuring instruments for pressure
Overview Application The pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials guarantees compliance with
More information2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationHigh Pressure Filter Pi 4230
High Pressure Filter Pi 4230 Nominal pressure 400 bar (5690 psi), nominal size 160 to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
More informationSterile version and Asepto sampling systems
terile version and Asepto sampling systems Hygienic Processing components... All medium contact materials traceable Component of the BB modular system version uaranteed zero dead volume Fits in BB sterile
More information