HTM PP/PVDF HTM SS 316 HCM HCO. Our company Pag. 04. HTM PP/PVDF Pag. 06. The quality management system Pag. 04. HTM SS 316 Pag.
|
|
- Barnard Waters
- 6 years ago
- Views:
Transcription
1
2 Our company Pag. 04 The quality management system Pag. 04 Product quality Pag. 05 Our mission Pag. 05 GemmeCotti is online Pag. 05 GemmeCotti Pumps Pag. 05 HTM PP/PVDF Pag. 06 HTM SS 316 Pag. 07 HCM Pag. 08 HTT Pag. 09 HTT-SP Pag. 10 HTA Pag. 11 Pag. 06 Pag. 07 Pag. 08 HTM PP/PVDF HTM SS 316 HCM THERMOPLASTIC MAG-DRIVE CENTRIFUGAL PUMPS METALLIC MAG-DRIVE CENTRIFUGAL PUMPS THERMOPLASTIC MAG-DRIVE CENTRIFUGAL PUMPS Pag. 12 HPP/HPF THERMOPLASTIC MAG-DRIVE ROTARY VANE PUMPS Pag. 13 HTP METALLIC ROTARY VANE MAG-DRIVE PUMPS DRY SELF-PRIMING Pag. 14 HCO THERMOPLASTIC MECHANICAL SEAL CENTRIFUGAL PUMPS 2
3 HPP/HPF Pag. 12 HTP Pag. 13 HCO Pag. 14 VPM/VPS/VPL Pag. 15 HV Pag. 16 PVA Pag. 18 Atex Pumps Pag. 19 Portable pump series H-IBC Pag. 20 Accessories Pag. 21 Chemical compatibility guide Pag. 22 HVL Pag. 17 Pag. 09 HTT THERMOPLASTIC MAG-DRIVE REGENERATIVE TURBINE PUMPS Pag. 10 HTT-SP THERMOPLASTIC MAG-DRIVE REGENERATIVE TURBINE PUMPS SELF-PRIMING Pag. 11 HTA METALLIC MAG-DRIVE REGENERATIVE TURBINE PUMPS Pag. 15 Pag. 16 Pag. 17 Pag. 18 VPM/VPS/VPL HV HVL PVA LIQUID RING VACUUM PUMPS VERTICAL CENTRIFUGAL MONOBLOC PUMPS VERTICAL CENTRIFUGAL PUMPS WITH COUPLING VERTICAL CENTRIFUGAL CANTILEVER PUMPS
4 OUR COMPANY GemmeCotti Srl has been producing pumps for acids and dangerous liquids, mixers, filters and compressors since 1992, when its founders started their own company after considerable experience in pump design and production. Over the years, GemmeCotti has created its own range of pumps for acids designed and manufactured by its experienced team of experts that was able to produce technologically advanced pumps which are resistant to aggressive chemical agents and that are now valued the world over. GemmeCotti pumps are successfully used in many different industries including: chemical and petrochemical, pharmaceutical, oil refinery, electroplating, printed circuits, electronic, photography, military, water treatments, biotechnology, paper mills, textile, sugar plants, food processing, dairies and many others. THE QUALITY MANAGEMENT SYSTEM In 2007 GemmeCotti obtained the ISO 9001:2000 certification, a clear proof of their dedication to constant improvement and desire to offer high quality service and products. The quality management system has then been updated according to the requirements of the new ISO 9001:2008. With the constant desire to meet customers expectations and offer them the best support and products, Gemme Cotti constantly seeks to improve every business process: from the technical and production department, to the marketing and sales office. Every aspect is developed and organized so that the company can be competitive and flexible on the pump market and can maintain the position of leading supplier of pumps for chemicals. 4
5 PRODUCT QUALITY GemmeCotti s first aim is to understand the customers requirements and supply the best product suitable for their needs. The sales and technical office are able to select the right pumps model and the recommended material for the requested application using the company s know-how together with up-to-date software tools. Once chosen, the pump can be manufactured. All the parts of the pumps come from qualified suppliers and they are checked and machined carefully by highly skilled GemmeCotti personnel to assure the compliance to the technical constructive drawings. After the assembly our pumps are then all tested one by one in our new and modern test bench to check the performances and the good functioning before shipping them to the customer. Thanks to a fully stocked warehouse, GemmeCotti can store most of the parts of the standard pumps, so that in case of urgent request, we are able to supply rapidly to the customer both pumps and spare parts. OUR MISSION GemmeCotti corporate policy is oriented to quality and continuous improvement. Our main purpose is to become Privileged supplier of our customers for pumps for acids and dangerous liquids and to maintain this status. We want to offer the best products and the best service possible with an extremely reduced delivery time. GEMMECOTTI IS ONLINE GemmeCotti offers the possibility to always have up-to-date information about the company and all the pumps through the website It is designed so that every single pump model has its own detailed description and technical drawings and, from a dedicated section, it s possible to download all the PDF catalogues. Moreover, the customer using a chemical resistance chart can proceed with a first selection of the pump type and material suitable for his application before contacting our sales office. GEMMECOTTI PUMPS Our wide range of products includes mag-drive centrifugal pumps, mag drive turbine pumps, mag drive vane pumps, vertical pumps, mechanical seal pumps and vacuum pumps, manufactured in thermoplastic materials (PP or PVDF) or metallic materials (Aisi 316, Titanium, Hastelloy). All GemmeCotti pumps are in compliance with the Machinery Directive (CE/2006/42) 5
6 MMAG DRIVE HTM PP/PVDF THERMOPLASTIC MAG-DRIVE CENTRIFUGAL PUMPS AG DRIVE Mag - drive system PP / PVDF High corrosive liquids Toxic, noxious and carcinogenic liquids FLOW 0,5 45 m 3 /h usgpm MAX HEAD 33 mlc 150 ft TEMPERATURE 0 / +90 C +32 / +190 F MAWP 4 bar 60 PSI Mag drive centrifugal pumps series HTM PP/ PVDF are made of thermoplastic materials and are suitable to pump high corrosive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. PERFORMANCE CURVES 50HZ RPM HTM 50 H (m) HTM HTM 31 8 HTM 15 HTM 10 4 HTM 6 HTM Q (mc/h)
7 MMAG DRIVE HTM SS 316 METALLIC MAG-DRIVE CENTRIFUGAL PUMPS AG DRIVE Mag - drive system AISI 316, Hastelloy, Titanium Corrosive, Toxic, noxious and carcinogenic liquids Hydrocarbons, pyrophorics and other flammables Heat transfer oils Refrigerants and cryogenics Radioactive liquids FLOW 0,5 32 m 3 /h usgpm MAX HEAD 24 mlc 110 ft TEMPERATURE -40 / +160 C -40 / +320 F MAWP 10 bar 150 PSI Mag drive centrifugal pumps series HTM SS316 are made of metallic materials and are suitable to pump high corrosive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. Also available in ATEX version for zone 1 and 2 (pump model EM-C) PERFORMANCE CURVES 50HZ RPM H (m) HTM 15 HTM 31 3 HTM 6 HTM Q (mc/h) 7
8 MMAG DRIVE HCM THERMOPLASTIC MAG-DRIVE CENTRIFUGAL PUMPS AG DRIVE Mag - drive system Pump head machined from a solid block PP / PVDF High corrosive liquids Toxic, noxious and carcinogenic liquids Resists cavitation FLOW 0,2 130 m 3 /h usgpm MAX HEAD 48 mlc 200 ft TEMPERATURE 0 / +90 C 32 / +190 F MAWP 10 bar 150 PSI Mag drive centrifugal pumps series HCM PP/ PVDF are made of thermoplastic materials and are suitable to pump high corrosive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. PERFORMANCE CURVES 50HZ RPM HCM H (m) HCM HCM HCM HCM $ HCM Q (mc/h)
9 MMAG DRIVE HTT THERMOPLASTIC MAG-DRIVE REGENERATIVE TURBINE PUMPS AG DRIVE Mag - drive system PP / PVDF High corrosive liquids Toxic, noxious and carcinogenic liquids Handles up to 20% entrained gas. Resists cavitation FLOW 0,2 9 m 3 /h 1-47 usgpm MAX HEAD 50 mlc 210 ft TEMPERATURE 0 / +90 C 32 / +190 F MAWP 6 bar 90 PSI Mag drive turbine pumps series HTT are made of thermoplastic materials suitable to pump high corrosive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. PERFORMANCE CURVES 50HZ RPM MIN FLOW H (m) HTT HTT 5000 HTT 9000 HTT HTT 3000 HTT Q (mc/h) 9
10 MMAG DRIVE HTT-SP THERMOPLASTIC MAG-DRIVE REGENERATIVE TURBINE PUMPS SELF-PRIMING AG DRIVE Mag - drive system Self-priming PP / PVDF High corrosive liquids Toxic, noxious and carcinogenic liquids Handles up to 20% entrained gas. Resists cavitation FLOW 0,2 6 m 3 /h 1-32 usgpm MAX HEAD 24 mlc 110 ft TEMPERATURE 0 / +90 C 32 / +190 F MAWP 6 bar 90 PSI Mag-drive regenerative turbine pumps series HTT-SP are made of thermoplastic materials suitable to pump high corrosive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. These pumps can be self-priming up to 3 m. PERFORMANCE CURVES 50HZ RPM MIN FLOW H (m) HTT-SP 5000 HTT-SP 7000 HTT-SP ,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6, Q (mc/h)
11 MMAG DRIVE HTA METALLIC MAG-DRIVE REGENERATIVE TURBINE PUMPS AG DRIVE Mag - drive system High head/low flow AISI 316 HASTELLOY-C TITANIUM High corrosive liquids Toxic, noxious and carcinogenic liquids Hydrocarbons, pyrophorics and other flammables Heat transfer oils Refrigerants and cryogenics Radioactive liquids Handles up to 20% entrained gas and resists cavitation FLOW 0,2 7 m 3 /h 2,6-35 usgpm MAX HEAD 80 mlc 314 ft TEMPERATURE -40 / +160 C -40 / +320 F MAWP 25 bar 360 PSI Regenerative mag drive turbine pumps series HTA are made of metallic materials and are suitable for dangerous and inflammable liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. Also available in ATEX version for zone 1 and 2 (pump model EM-T). PERFORMANCE CURVES 50HZ RPM MIN FLOW H (m) HTA HTA 25 HTA 37 HTA Q (mc/h) 11
12 MMAG DRIVE HPP/HPF THERMOPLASTIC MAG-DRIVE ROTARY VANE PUMPS AG DRIVE Mag - drive system High head/low flow PP / PVDF Corrosive liquids Toxic, noxious and carcinogenic liquids FLOW l/h 0,1-5 usgpm MAX HEAD 5 bar 72 PSI TEMPERATURE 0 / +90 C 32 / +190 F MAWP 8 bar 110 PSI Rotary vane mag drive pumps series HPP- HPF are made of thermoplastic materials and are suitable for corrosive liquids, alkalis, toxic, noxious and carcinogenic fluids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. PERFORMANCE CURVES 50HZ RPM RANGE 600 Q (L/h) RANGE ,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 H (bar) 12
13 MMAG DRIVE HTP METALLIC ROTARY VANE MAG-DRIVE PUMPS DRY SELF-PRIMING AG DRIVE Mag - drive system Dry self-priming High head/low flow AISI 316 HASTELLOY-C TITANIUM Corrosive liquids Toxic, noxious and carcinogenic liquids hydrocarbons, pyrophorics and other flammables Heat transfer oils Refrigerants and cryogenics Radioactive liquids FLOW l/h 0,5-11 usgpm MAX HEAD 13 bar 188 PSI TEMPERATURE -40 / +160 C -40 / +320 F MAWP 25 bar 360 PSI Rotary vane mag drive pumps series HTP are made of metallic materials and are suitable for high corrosive liquids, hydrocarbons, solvents, heat transfer oils, refrigerants, cryogenics and radioactive liquids. Thanks to the innovative mag-drive system with high torque magnetic coupling without any mechanical seal, risks of leakage and maintenance costs are greatly reduced. PERFORMANCE CURVES 50HZ RPM Also available in ATEX version for zone 1 and 2 (pump model EM-P) RANGE 1400 Q (L/h) RANGE RANGE H (bar) 13
14 HCO THERMOPLASTIC MECHANICAL SEAL CENTRIFUGAL PUMPS Mechanical seal pump, semi-open impeller PP / PVDF High corrosive liquids Liquids with solids MECHANICAL SEAL FLOW 0,5 58 m 3 /h usgpm MAX HEAD 38 mlc 170 ft TEMPERATURE 0 / +90 C 32 / +190 F MAWP 4 bar 60 PSI Mechanical seal centrifugal pumps series HCO are made of thermoplastic materials and are suitable to pump high corrosive liquids and liquids with solids. The seal of pumps HCO size is guaranteed by a special elastomeric lip seal, while all the other pump sizes (from size 110 to 170) are equipped with an internal PTFE bellows mechanical seal (sic/ceramic). Manufactured by Gemmecotti. PERFORMANCE CURVES 50HZ RPM H (m) HCO 150 HCO 170 HCO HCO 110 HCO 155 HCO 120 HCO 140 HCO 160 HCO Q (mc/h) 14
15 MMAG DRIVE VPM/VPS/VPL LIQUID RING VACUUM PUMPS VPS/VPL: mechanical seal VPM: mag drive system AISI 316 ALLOY 20 - HASTELLOY-C - TITANIUM Corrosive, toxic, noxious and carcinogenic liquids Hydrocarbons, pyrophorics and other flammable gases AG DRIVE MECHANICAL SEAL FLOW m 3 /h usgpm MAX HEAD 33 mbar 28,2 incheshg TEMPERATURE 0 / +90 C 32 / +190 F MAWP 10 bar 150 PSI Liquid ring vacuum pumps are available in 3 different designs: VPM: magnetic drive, sealless pump, VPS: close coupled design with single mechanical seal, VPL: standard execution with single mechanical seal. VPS/VPL pumps are designed in a conventional overhung impeller design meanwhile VPM pumps have an impeller with both side support. They are suitable for operating with both toxic and dangerous gases and they are also fully compliant with ATEX certification requirements. PERFORMANCE CURVES 50HZ RPM 15
16 HV VERTICAL CENTRIFUGAL MONOBLOC PUMPS Vertical centrifugal monobloc pumps, semi-open impeller PP / PVDF High corrosive liquids with solids Vertical pumps series HV are monobloc pumps made of thermoplastic materials (PP/PVDF) and are suitable to pump high corrosive liquids containing solids in suspension. The length of the column can vary from 500 mm to 1000 mm. FLOW 0,2 40 m 3 /h usgpm MAX HEAD 22 mlc 104 ft TEMPERATURE 0 / +90 C 32 / +190 F PERFORMANCE CURVES 50HZ RPM H (m) 12 9 HV 140 HV HV 110 HV HV Q (mc/h) 16
17 HVL VERTICAL CENTRIFUGAL PUMPS WITH COUPLING Vertical centrifugal pumps with coupling and semi-open impeller PP / PVDF High Corrosive liquids with solids Vertical pumps series HVL are centrifugal pumps with coupling made of thermoplastic materials (PP/PVDF) and are suitable to pump high corrosive liquids containing solids in suspension. The length of the column can vary from 500 mm to 2000 mm. UP TO 2 m FLOW 0,2 57 m 3 /h usgpm MAX HEAD 39 mlc 170 ft TEMPERATURE 0 / +90 C 32 / +190 F PERFORMANCE CURVES 50HZ RPM H (m) HVL 150 HVL 170 HVL HVL 110 HVL 140 HVL 155 HVL 120 HVL 95 HVL Q (mc/h) 17
18 PVA VERTICAL CENTRIFUGAL CANTILEVER PUMPS Vertical centrifugal cantilever pump Designed for printed circuit boards AISI 316, TITANIUM Corrosive liquids Potassium Permanganate Liquids with solids Vertical cantilever pumps series PVA are made of metallic materials (AISI316 or Titanium) and they are suitable for corrosive liquids containing solids. Especially designed for use in the production of printed circuit boards, PVA pumps have a combined system of labyrinth, rings and lip seal which guarantee tightness against gas and vapors. FLOW 0,5 24 m 3 /h usgpm MAX HEAD 26 mlc 10 0 ft TEMPERATURE 0 / +160 C 32 / +320 F PERFORMANCE CURVES 50HZ RPM H (m) 12 9 PVA Q (mc/h) 18
19 ATEX PUMPS GEMMECOTTI CAN SUPPLY ALSO ATEX CERTIFIED PUMPS FOR ZONE 1 AND 2. THE ATEX PUMPS AVAILABLE ARE: Pumps model EM-C (SEE HTM SS316) Pumps model EM-T (SEE PUMPS SERIES HTA) Pumps model EM-P (SEE PUMPS SERIES HTP) 19
20 PORTABLE PUMPS SERIES H-IBC The pumping system for IBC tanks is a portable device composed of a mag drive centrifugal pump series HTM PP/PVDF, laced in a frame so that it can be easily moved. This system is suitable for several uses, and it is portable. The pump, placed in a proper structure, can be removed from an IBC container s attack and connected to another, thanks to quick couplings. 20
21 ACCESSORIES BASEPLATES Baseplate in PP suitable for pumps complete with motors B3/B5. Available in 3 different dimensions for NEMA and IEC motors from 0,12 kw to 4 kw (up to size 112) (baseplates type A /B/C) DRY-RUNNING PROTECTION The dry-running protection is a useful device that prevents expensive damage to pumps. It avoids the dry-running working, the closed discharge and the blocked suction and it s particularly indicated for unloading tank truck or every other application in which it's not sure that the liquid is constantly present in the pipes. FLANGES GemmeCotti Pumps are available with standard threaded connection or, upon request with flanges. 21
22 CHEMICAL COMPATIBILITY GUIDE All the information in this chart is only approximate and should only be used for an initial choice of the type of materials best suited for the customers pumps. The data comes from various highly reliable sources. Despite this, GemmeCotti itself did not carry out the relative tests, and is not responsible for the preciseness of the data. Therefore, GemmeCotti takes no responsibility for possible malfunctions or damages of any type caused by the incorrect selection of construction materials and/or of the incorrect choice of pump size if it is not made by GemmeCotti itself after having received all pertinent information regarding the application and the characteristics of the pumped liquid. Legend: A= Very good B= Good C= Poor, not recommended D= Very poor, not recommended 1. Good until 22 C (72 F) 2. Good until 48 C (120 F) PUMP MATERIALS O-RINGS MATERIALS CHEMICAL PP PVDF AISI 316 EPDM Viton PTFE Acetone A D A A D A Acetic Acid B C B A B A Acetic Acid 20% A A A A B A Acetic Acid 80% A C B A B A Acetic acid, glacial A1 A1 A B D A Hydrochloric Acid <33% A2 A D A2 A A Hydrofluoric Acid 50% A A D D B A Hydrofluoric Acid 100% C1 A B1 D B A Phosphoric Acid < 40% A A C A A A Phosphoric Acid > 40% A A D A A A Sulfuric Acid (10-75%) A1 A D B2 A2 A Sulfuric Acid (75-100%) C1 A D B1 A1 A Sulfuric Acid 100% D D A D A A Sea Water A A C A2 A A Water, Distilled A A A A A A Water, Acid, Mine A A B A A A Alcohols:Ethyl A A A A A A Alcohols:Isopropyl A2 A B A A A2 Alcohols:Methyl A2 A A A C A 22
23 PUMP MATERIALS O-RINGS MATERIALS CHEMICAL PP PVDF AISI 316 EPDM Viton PTFE Alcohols:Propyl A A2 A A A A Amines B2 - A B D A2 Ammonia, liquid A2 A A2 A D A Gasoline (high-aromatic) A A A D A B Chlorine, Anhydrous Liquid D A1 C B A A Ferric Chloride A A D A A A Detergents A A A1 A A A Fuel A1 A A1 D A A Ether D B1 A C C A Phenol (Carbolic Acid) B A1 B B A A Glucose A A A A A A Hydrogen Peroxide 10% A A B A A A Hydrogen Peroxide 30% B1 A B B A A Naphtha B A A D A B Nickel Chloride A A C A1 A A Fuel Oils A B A D A B Olive oil A - A D A A1 Hydraulic Oil (Petro) D A A D A A Oil: Hydraulic Oil (Synthetic) D A A A A A Motor oil A1 B A2 D - A Copper Chloride A A D A A A Copper Sulfate > 5% A A B A A A Rosins A2 - A1 - A A Salt Brine A A A2 A A2 A2 Tin Salts A A D B A A Soap Solutions A A1 A1 A A A Sodium Bicarbonate A A A1 A2 A A Sodium Bisulfite A A B1 A2 A A Sodium Carbonate A A A A2 A A Sodium Chloride A A B A A A Sodium Hydroxide (10%) A C - A C - Sodium Hydroxide (40%) A C - A C - Sodium Hydroxide (50%) A C B1 A D A Sodium Hypochlorite 12,5% C A C A A A Sodium Hypochlorite (100%) C A C B1 A1 A Aluminum Sulfate A A B2 A A A Lacquer Thinners D - A D D A Photographic Developer A - A B A A Toluene (Toluol) C1 A1 A D C A Urea A A B A A A 23
24 GemmeCotti S.r.l. Via A. Volta 85/A Ceriano Laghetto MB - ITALY info@gemmecotti.com Phone: Fax: Website:
CHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE TURBINE S SEAL-LESS MAG DRIVE TURBINE S In seal-less magnetic drive turbine pumps, the external magnet is directly connected to the motor shaft and
More informationCHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2018/19 MAG-DRIVE ROTARY VANE S SEAL-LESS MAG DRIVE VANE S In seal-less magnetic drive vane pumps, the external magnet is directly connected to the motor shaft and
More informationCHEMICAL PUMPS SINCE 1992
CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE CENTRIFUGAL S SEAL-LESS MAG DRIVE CENTRIFUGAL S In seal-less magnetic drive centrifugal pumps, the external magnet is directly connected to the motor
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationNO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS
NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS MARCH PUMPS Why A ic Drive Pump A magnetic drive pump is sealless, preventing any leakage that is normally
More informationHEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO DIN 24256
HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO 2858 - DIN 24256 CN MAG-M Series The separation of liquid chamber/atmosphere by means of an isolation
More informationAlloy version available please call for specifications.
Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.
More informationBe prepared with Lutz. Safety is our concern
Be prepared with Lutz Safety is our concern L u t z P u m p S e t s L u t z P u m p S e t s Lutz Pump Sets A quick solution for many applications 2 Already pre-assembled Example: Pump set consisting of:
More informationApplication Data Sheet. Chemical Compatibility Chart. IND-AS EN-01 (May, 2014) Metals Plastics Seals KEY. Good. Fair. Ethylene Propylene.
Chemical Compatibility Chart 6 Stainless Acetic Acid Acetone Acetylene Acidic Mine Water Acrylonitrile Ammonium Chloride Ammonium Hydroxide Ammonium Sulfate Ammonium Thio-Sulfate Anhydrous Ammonia Anhydrous
More informationSelection of DODGE E-Z KLEEN Polymer and Stainless Steel Housed Ball Bearings. P = (X x F R ) + (Y x F A ) F A C o
Selection of DODGE and Stainless Steel Housed Ball Bearings DODGE ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined radial/thrust
More informationPump Kits. More than just pumps
Pump Kits More than just pumps Table of Contents FLUX Pump Kits for: Acids and Alkalis 4 5 Concentrated Acids and AdBlue 6 Petroleum Products 7 Flammable Liquids 8 Universal Applications 9 99.98 % Drum
More informationIndustrial-process. centrifugal pumps. general brochure.
R Industrial-process centrifugal pumps general brochure www.cdrpompe.com Fields of use CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s with the manufacture
More informationCentrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies
Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the
More informationIndustrial-process. centrifugal pumps.
R Industrial-process centrifugal pumps www.cdrpompe.com CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s
More informationSealless, Non-Metallic Pumps for Crucial Liquid Containment Applications
Viking Non-Metallic Mag Drive Pumps Sealless, Non-Metallic Pumps for Crucial Liquid Containment Applications Universal flanges and Motor Adapters Standard housing mates to both DIN and ANSI flange systems
More informationT H E C O M P A N Y. TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2
T H E C O M P A N Y TURNOVER 2005 : 9,500,000 EUROS ANNUAL OUTPUT: 3,700 pumps Total area : 10,000 m 2 Manufacturing area: 4,000 m 2 SOMEFLU is specialized for more than 40 years in the design and the
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM Stainless Steel Pumps are designed to handle the toughest Chemical Processing Applications. Design: Drive speeds to 8 rpm; discharge pressures to psi; flow rate to. gpm; foot or flange
More informationPump kits. We deliver values.
Pump kits We deliver values. Table of contents FLUX Pump Kits for: Acids and alkalis 4 5 Concentrated acids and AdBlue 6 Petroleum products 7 Flammable liquids 8 Universal applications 9 99,98 % barrel
More informationAn ISO 9001 Company
www.finishthompson.com An ISO 91 Company www.finishthompson.com Finish Thompson Inc. is a designer and manufacturer of industrial pumps, solvent and engine coolant recyclers and coolant changers. FTI products
More informationAir Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL
Air Operated Double Diaphragm Pump M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL 0.5 I.O.M rev 05. 12/2015 INDEX Title Section Introduction.1 Safety.2 Warranty, General
More informationANSI DIMENSIONAL NEODYMIUM MAG DRIVES PLASTIC & STAINLESS STEEL CENTRIFUGALS DRUM/BARREL PUMPS
www.finishthompson.com ANSI DIMENSIONAL NEODYMIUM MAG DRIVES PLASTIC & STAINLESS STEEL CENTRIFUGALS DRUM/BARREL PUMPS An ISO 91 Company www.finishthompson.com Finish Thompson Inc. is a designer and manufacturer
More informationAEGIS TM BFV SERIES. Fully Lined High Performance Butterfly Valves Engineered for Industries, Most Hazardous & Corrosive Services
AEGIS TM BFV SERIES Fully Lined High Performance Butterfly Valves Engineered for Industries, Most Hazardous & Corrosive Services Sectioned Model Double D stem Polyurethane coated ASTM A 395 ductile iron
More informationFybroc Vertical Turbine Pumps
FYBROC SERIES 8500 FIBERGLASS CONSTRUCTION FOR CORROSIVE APPLICATIONS Fybroc Vertical Turbine Pumps B U L L E T I N 8 5 B 1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc,
More informationReliable, Corrosion Resistant Chemical Pumps
3 Product brochure Reliable, Corrosion Resistant Chemical Pumps 8.447.8342 3 Specifications DESIGN The Advance 3 is a close coupled, end suction centrifugal pump line which is molded in Noryl. Its high
More informationUnderground Tank Applications Installation Guide
IF Underground Tank Applications Installation Guide Coro-Flo Pumps Background: Because of the environmental problems caused by traditional fuels such as gasoline and diesel, the use of alternative fuels,
More informationDosaSkid Turnkey and ready-to-use device
2 types of plug-and-play dosing solutions: Frame-mounted pump(s) Chemical injection package with storage tank Compact, modular and selfcontained metering solutions. DosaSkid are ideal for preparing, storing
More informationAPOVAC R Vacuum Systems
APVAC R Vacuum Systems with closed ring-liquid loop for the suction and recovery of gases and vapours APVAC = Anti Pllution VACuum PED APVAC R APVAC Vacuum systems with closed ring-liquid loop for the
More information1 Introduction & mission 2 History 3 Markets 4 Products 5 Certificates 6 Applications and special executions 7 Services
Jan 2018 1 Introduction & mission 2 History 3 Markets 4 Products 5 Certificates 6 Applications and special executions 7 Services Introduction & mission euromotori is an italian manufacturer of electric
More informationNon-Metallic Seal-less Mag-Drive Pumps
Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine & Self-Priming From WARRENDER: Advanced design, materials
More informationProduct Engineering Guide
PRIMARY FLUID SYSTEMS INC. 1050 Cooke Blvd., Burlington, ON. Canada, L7T 4A8 Tel: (905)333-8743 Fax: (905)333-8746 Toll-Free: 1-800-776-6580 www.primaryfluid.com primary@primaryfluid.com Product Engineering
More informationProduct Catalogue Industrial Pumps & Metering Systems
Product Catalogue 2017 Industrial Pumps & Metering Systems TABLE OF CONTENTS Applications 4 Pump Packages 5 Drum Pump Motors 9 Pump Tubes (PP, PPS, CPVC, PHT, PVDF) 11 Performance Curves for Centrifugal
More informationMAXP APPLICATIONS: Mechanical Seal ANSI Process Pumps. Magnetic Drive ANSI Process Pumps
MAXP 3575 Magnetic Drive ANSI Process Pumps Mechanical Seal ANSI Process Pumps State of the art, heavy duty, Magnatex MAXP ANSI pumps are available in a wide variety of materials to meet demanding applications
More informationProduct Catalogue Industrial Pumps & Metering Systems
Product Catalogue 2017 Industrial Pumps & Metering Systems TABLE OF CONTENTS Applications 4 Pump Packages 5 Drum Pump Motors 9 Pump Tubes (PP, PPS, CPVC, PHT, PVDF) 11 Performance Curves for Centrifugal
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationAUTOGAS 150 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS
Application Bulletin A Unit of IDEX Corporation No. 13 June 21 AUTOGAS 1 SERIES PUMPS INSTALLATION GUIDELINES FOR UNDERGROUND TANK APPLICATIONS CORKEN, INC. A Unit of IDEX Corporation P.O. Box 12338, Oklahoma
More informationSwivel Joints Flexmaster Joints Part Number NH NH NH NH NH NK NK
FLUID CONVEYING PRODUCTS Section Pages Hose 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Description Page Features 246, 247 Technical Data 248, 253 Gasket Selector Chart 249 How to Order 250
More informationANSI DIMENSIONAL NEODYMIUM MAG DRIVES PLASTIC & STAINLESS STEEL CENTRIFUGALS DRUM/BARREL PUMPS
www.finishthompson.com ANSI DIMENSIONAL NEODYMIUM MAG DRIVES PLASTIC & STAINLESS STEEL CENTRIFUGALS DRUM/BARREL PUMPS An ISO 91 Company www.finishthompson.com Finish Thompson Inc. is a designer and manufacturer
More informationINVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
More informationMass Transfer Trays for - Refineries - Chemical and Petrochemical Industries - Environmental Applications
Mass Transfer Trays for - Refineries - Chemical and Petrochemical Industries - Environmental Applications Our Program Products, Installation and Technical Support We Offer Solutions...... to increase the
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More informationGoulds Process Pumps designed for severe corrosive services
Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design
More informationMagnetic Drive Gear Pumps
Inneseiten RZ engl..1. 11:3 Uhr Seite Gather supplies complete solutions ready for operation Magnetic Drive Gear Pumps PULSATION-FREE TQM Shortest delivery M a de in times y Ger m a n TQM Shortest delivery
More informationConley Product Bulletin
EXTRA HEAVY DUTY CONLEY BASKET STRAINERS Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Strainer Types Inline basket strainers in sizes from 1 ½ through 30 Inline Y-type
More informationPlastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
More informationTapflo - your reliable pumpchoice
Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationCENTRIFUGAL IMMERSION PUMPS
CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationTFP TEFLON RESIN PUMP PFR ACIDPROOF FRP PUMP. PT DUA PUTRI PERKASA INDEX CONTENTS PFR TFP
PT DUA PUTRI PERKASA +62-21 88963849 sales@duaputriperkasa.com INDEX HORIZONTAL, SINGLE STAGE METALLIC VOLUTE PUMP S HORIZONTAL, SINGLE STAGE METALLIC VOLUTE PUMP TFP TEFLON RESIN PUMP PFR ACIDPROOF FRP
More informationPORTABLE FLUID TRANSFER SOLUTIONS DRUM/BARREL PUMPS
PORTABLE FLUID TRANSFER SOLUTIONS DRUM/BARREL S ING SOLUTIONS AROUND THE WORLD finishthompson.com DRUM S PF SERIES TUBES PFM/PFP PFV PFS Sealless, High Performance Unique double suction impeller provides
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,
More informationDRUM AND CONTAINER PUMPS
DRUM AND CONTAINER PUMPS NEW now supplied with FLUX-Clip INNOVATORS IN FLOW TECHNOLOGY FLUX PUMPS: PERFECTION IN PUMPING Do you want to transfer differing liquids quickly and economically? Do you want
More informationTHE LEADING FORCE behind liquids since 1857
THE LEADING FORCE behind liquids since 1857 High Capacity Bulk Liquid Handling Pumps - For loading/unloading transport truck tankers, railway tank cars, and barges - High flow rate transfer capability
More informationCRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves
Series 560/570 Safety Valves Our 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and
More informationHAGLER PRODUCTS AND SERVICES CATALOG PUMPS CONTROLS PROCESS EQUIPMENT DISTRIBUTION PACKAGED SYSTEMS SERVICE
HAGLER PRODUCTS AND SERVICES CATALOG PUMPS CONTROLS PROCESS EQUIPMENT DISTRIBUTION PACKAGED SYSTEMS SERVICE ABOUT US HAGLER is a process equipment distributor that specializes in the sizing and selecting
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationAEGIS TM LBR SERIES. Low Torque, Fully Lined High Performance Ball Valves Engineered for Industries, Most Hazardous & Corrosive Services
AEGIS TM LBR SERIES Low Torque, Fully Lined High Performance Ball Valves Engineered for Industries, Most Hazardous & Corrosive Services Sectioned Model Independent stop PTFE/graphite stem/gland bushing
More informationProducts: Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose. Metall Hose, Bellows and Compensators
Composite Hose Metall Hose Bellows, Compensators Swivel Joints Composite Hose Very flexible and easy to handle hoses for trucks, ships, railroad cars and industrial applications. Available in various designs
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationMM PISTON PUMP
MM-76500-50 PUMP NATIONAL INSTRUMENT COMPANY Part No. 8649, FSV-60-1 with O-Ring Piston Note: To be used only on the MM-76400-20 and MM-76400-25 Fillers For filling semi viscous** to heavy viscosity***
More informationCentrifugal Immersion Pumps
Centrifugal Immersion Pumps FLUX Centrifugal Immersion Pumps Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process
More informationTekna. Solenoid driven dosing pumps. Your Choice, Our Commitment
Tekna Solenoid driven dosing pumps Your Choice, Our Commitment 02 Solutions for Water & Industry Five times the Flexibility A single outer casing contains 5 different models with flow rates ranging from
More informationDSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance
G A and G M series DOSING PUMPS / DSD Technology Up to 11.95 l/h and 70 bar / Product advantages DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance NEW Plunger
More informationDeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES
BULLETIN 45.00-1 NOVEMBER 2017 DeZURIK BHP HIGH PERFORMANCE BUTTERFLY VALVES Time-Tested, Exceptional Performance DeZURIK BHP High Performance Butterfly Valves are specially designed for applications in
More informationA measured step forward
A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience
More informationOHM Process Pump API 685 Magnetic Drive
OHM Process Pump API 685 Magnetic Drive Sulzer Pumps Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep commitment to fully understand the needs of
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationHigh quality. Dosing pumps, BL series. Features
High quality Dosing pumps, BL series Features Simple operation Flow rate control High quality materials Rugged design Supplied complete The most important question one must ask when choosing a dosing system
More informationMDP - series Non Leakage - Magnetic Drive Pump
MDP - series Non Leakage - Magnetic Drive Pump Brief Intruduction The magnetic-driving product is the result of perfect combination of the advanced R & D technology of anti-corrosive pump from our company.
More informationPerformance Spectrum. Heart of Hightech. Gear Pumps for Plant and Process Engineering, Chemical and Petrochemical
Performance Spectrum Heart of Hightech Gear Pumps for Plant and Process Engineering, Chemical and Petrochemical Gear Pumps as universal Dosing and Process Pumps Structural Design Applications and Range
More informationSelf-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu
Self-priming pump «Wilo-Drain SP» Technical Presentation of the new pump Wilo-Drain SP 24/07/2013 Olivier Rieu Summary Pump Wilo-Drain SP overview Self-priming principle Pump Wilo-Drain SP features Curves
More informationPFA Lined Magnetic Drive Centrifugal Pumps Efficient Non-Corroding Vacuum-Resistant
PFA Lined Magnetic Drive Centrifugal Pumps Efficient Non-Corroding Vacuum-Resistant MKPL Magnetic drive chemical process pump MKPL-S Self-priming magnetic drive chemical process pump Designed to: DIN EN
More informationDrum and Container Pumps. New! with even more powerful drum pump motor FEM 4070
Drum and Container Pumps New! with even more powerful drum pump motor FEM 4070 FLUX Pumps: Perfection in Pumping Do you want to transfer differing liquids quickly and economically? Do you want to measure
More informationCHEMICAL PUMPS SINCE 1992
HEIA S SINE 1992 GENERA AAOGE 2017 AGDRIVE ENRIFGA S SEAESS AG DRIVE ENRIFGA S In sealless magnetic drive centrifugal pumps, the external magnet is directly connected to the motor shaft and it transmits
More informationChemical Protective Clothing Standards Update. Ulf Nyström
Chemical Protective Clothing Standards Update Ulf Nyström 2017-01-23 CPC = Chemical Protective Clothing 2 Ansell / Ulf Nyström International: ISO TC94 SC13 WG3 - CPC International: ISO TC94 SC14 WG4 -
More informationTBV Series Three-piece wafer valves
TBV Series 3100 Three-piece wafer valves Content TBV Series 3100 Three-Piece Wafer Valves Introduction................................................................................3 Features.....................................................................................4
More informationWe build unique systems
Under control We build unique systems Tailor-made solutions that consider every detail, for all your pumping needs. Our starting point is always a careful and accurate analysis of your needs. Only in
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationNJK Series ISO Standard End-Suction Centrifugal Pumps
ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28
More informationType 375. True Union Ball Valve
True Union Ball Valve Type 3 General Size: ⅜ 4 Material: PVC, CORZAN CPVC, or PPn Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged, PPro-Seal electrofusion socket
More informationUTN-L / UTN-BL II frame
UTN-L / UTN-BL II frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL 125-80-160 PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal
More informationDEF / AdBlue Catalogue (Diesel PL-800A Exhaust Fluid)
DEF / AdBlue Catalogue 2018 (Diesel PL-800A Exhaust Fluid) 1 AdBlue / Urea Electric Pump Packages Electric Package with Automatic Shut-off Nozzle Maximum Discharge Pressure: 32 psi (2,2 bar) Open Drip
More informationSIHI LPH-X - Liquid Ring Vacuum Pump Two Stage
- Liquid Ring Vacuum Pump Two Stage 45008, 45311, 45316 Pressure Range: Suction Volume: 33 to 1013 mbar 55 to 258 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction
More informationReliable, Corrosion Resistant Chemical Pumps
1 Product brochure Reliable, Corrosion Resistant Chemical Pumps Advance is a registered 1 Specifications DESIGN The Advance 1 is molded out of high-quality glass-filled Noryl, which gives it many advantages.
More informationUNIVERSAL. Flow Monitors Inc. INSITE Series PX - IS - TX Flow Rate Indicators and Switches
UNIVERSAL Flow Monitors Inc. INSITE Series PX - IS - TX Flow Rate Indicators and Switches 8 7 6 5 4 3 2 1 6 Fluid is always in sight Direct reading - English or Metric Mount in any position Plumb with
More informationMaterials of Construction Head materials in PVDF, 316 SS, and PP Ball Valves - Ceramic, and 316 SS Diaphragm - PTFE faced Hypalon.
Pulsafeeder Technology Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation in chemical dosing. Pulsafeeder has built a foundation of success with thousands of
More informationCombi Modular System. Standardised centrifugal pumps EN 733 EN ISO 5199 API 610
Combi Modular System Standardised centrifugal pumps EN 733 EN 22858 ISO 5199 API 610 SPX Johnson Pump brand water, chemical and petrochemical standardised pumps represent a range of horizontal centrifugal
More informationself-priming thermoplastics magnetic drive pumps
Rhino TMA Alifter TMA EU product Made in Italy self-priming thermoplastics magnetic drive pumps 2 Rhino - Alifter Chemical pumps In this catalog Argal offers self priming pumps with magnetic drive TMA
More informationChempump. G Series. Canned Motor Pumps
Chempump G Series Canned Motor Pumps G SERIES Exceptional Fugitive Emissions Containment Chempump introduced the first hermetically sealed pump and motor design over 50 years ago, and we ve been improving
More informationNS Series Non Metallic End-Suction Centrifugal Pumps
Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND
More informationAir Powered Double Diaphragm Pumps. Polypropylene Pumps. Made In Japan
Air Powered Double Diaphragm Pumps 2016 Polypropylene Pumps Made In Japan Presenting YTS Double Diaphragm Pumps Made In Japan Non-Lubricated Design High Flow Rates Efficient Air Consumption Easy & Fast
More informationCT CENTRIFUGAL PUMPS. edition 2017 rev 1. All about your flow
CT CENTRIFUGAL PUMPS edition 217 rev 1 All about your flow About Tapflo All about your flow Tapflo is a leading pump manufacturer with the ambition to provide a wide range of premium products for various
More informationWhen you need to be Sure, be Sure to be Ready! Warranty does not cover any shipping. Berm must be shipped back to factory prepaid.
The Ready Berm Manufactured by Ready Containment, LLC. under a strict ISO Certified Quality Management System. Rapid Deploying No Loose Parts 7 Year Warranty Recommend Options: Heavy Duty Ground Mat Chemical
More informationChemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant
Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable
More informationUTN-L / UTN-BL I frame
UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps
More informationTitrette. class A precision. The next generation Digital Burette!
The next generation Digital Burette! Titrette class A precision F I R S T C L A S S B R A N D With the Titrette bottle-top burette, you can titrate quickly and reliably with highest precision, even in
More informationLug Style Butterfly Valve Type 578
Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:
More informationMM PISTON PUMP
MM-76500-30 PISTON PUMP NATIONAL INSTRUMENT COMPANY Part No. 8655, FKS-60-75 Pump with O-Ring Piston For filling free flowing* to semi viscous** liquids INSTRUCTIONS U.S. AND FOREIGN PATENTS ISSUED AND
More informationTitrette. class A precision. 10 ml. New. size. The next generation Digital Burette!
The next generation Digital Burette! Titrette class A precision F I R S T C L A S S B R A N D With the Titrette bottle-top burette, available in 10, 25, and 50 sizes, you can titrate quickly and reliably
More informationCRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves
Series 740 Safety Valves Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose safety and relief valve for all services:
More informationTitrette. class A precision. The next generation Digital Burette!
The next generation Digital Burette! Titrette class A precision F I R S T C L A S S B R A N D With the Titrette bottle-top burette, available in 10 ml, 25 ml, and 50 ml sizes, you can titrate quickly and
More information