Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC
|
|
- Lenard Cain
- 6 years ago
- Views:
Transcription
1 New! Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends Raccord fileté / Threaded spigot Le système modulaire et flexible pour les raccords de tuyauteries aseptiques! La solution idéale pour obturer et réguler les pulvérulents, suspensions, fluides pâteux, épais ou fibreux. Avantages : Flexible et modulaire Diverses possibilités de raccords Extrêmement compacte Faible poids Passage intégral Pas de rétention Changement aisé du manchon Etanchéité optimale Economique The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation and regulation of solids of all kinds, suspensions, pastes, gaseous, fibrous and viscous media. Advantages: Flexible modular system Various connection options Extremely compact Light weight Complete free passage No dead spots Easy maintenance and re-sleeving 00% tight shut off Competitive
2 Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Domaines industriels : Industrie alimentaire et pharmaceutique Secteur du ciment Transport pneumatique Pigments et granulats Industrie de la céramique / du verre / du plastique Extraction Dosage Systèmes de remplissage et de pesage Systèmes de ventilation Industrial areas: Food/ pharmaceutical/ beverage industry Chemical industry pneumatic conveying systems pigments and granules ceramics/ glass/ plastic industry extraction systems dosing systems filling and weighing systems air venting systems Possibilités de raccords : Raccord par bride Raccord par filetage intérieur / NPT Raccord clamp Raccord à souder Raccord fileté Raccord pour tuyau souple Raccord aseptique / raccord hygiénique Connection options: Flange Connection Internal Thread Connection / NPT Tri-Clamp Weld-on ends Threaded spigot (RJT Connection) Threaded hose nozzle Connection Aseptic /ygienic Connection Exécutions spéciales antistatique avec raccordement à la terre conformes pour les environnements Ex Zones, 2, 2, 22 sont également disponibles. Special, conductive models with a separate grounding system, suitable for use in areas at risk of explosions (EX) in zones, 2, 2 and 22, are also available. Les vannes à manchon pneumatiques de la Série VMC sont conformes à la DESP 97/23/CE. Materiaux : Corps: Acier inoxydable.4408 Aluminium AlSi0Mg Plastique POM Raccords : Acier inoxydable.4404 Plastique POM Manchons: NR anti-abrasion, NR alimentaire, EPDM, EPDM alimentaire, NBR, NBR alimentaire, CSM, IIR, CR, Silicone, FPM, autres matières sur demande. The air operated Pinch Valves of VMC series fulfill all requirements of the Pressure Equipment Directive 97/23/EC. Materials: Stainless steel.4408 Aluminium AlSi0Mg Plastic POM Socket Connection: Stainless steel.4404 Plastic POM Sleeves: NR abrasion resistant, NR food quality, EPDM, EPDM food quality, NBR, NBR food quality, CSM, IIR, CR, Silicone, FPM, other materials on request. Pression de service du fluide : ~ 6 bar Pression d alimentation max: 8 bar Pression différentielle : 2-3,5 bar Varie selon les diamètres et l élastomère Operating / medium pressure max.: Control / closing pressure max.: Differential pressure: varies depending on diameter / sleeve ~ 6 bar 8 bar bar Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 2 VMC-fr/en_
3 Vanne à manchon pneumatique - Bride (F) Air operated Pinch Valve - Flange (F) (a(a) / b) DIN EN ISO 228 "" Raccord par bride selon DIN EN 092- PN 0/6 DIN (BF) / forme A (BF) sur demande Flange connection according to DIN EN 092- PN 0/6 DIN (BF) / form A (BF) (a) on request Acier inoxydable.4408 (E) Aluminium AlSi0Mg (A) Stainless steel.4408 (E) Aluminium AlSi0Mg (A) Bride : Acier inoxydable.4404 (E) Flange: Stainless steel.4404 (E) Parties en contact avec le fluide = Ra 0,5 Finition polie Ra 0,3 sur demande. Wetted parts = Ra 0.5 Satin polished (brushed) Ra 0.3 on request / Di D ø D3 ø DF nb ø d ø TK L a /8" 36,5 0,09 2,4, /4" 45 0,3 2,9 2, /4" 50 0,22 4,0 3, /4" 60 0,36 5,8 4, /4" 73,5 0,44 5,7 4, /4" 90 0,88 7,6 6, /4" 07,80 0,3 - N de trous / Number of holes Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 3 VMC-fr/en_
4 ANSI Vanne à manchon pneumatique - Bride (FA) Air operated Pinch Valve - Flange (FA) ANSI/ASME B.20. "NPT" Raccord par bride selon ANSI B 6.5 / 50lbs Flange connection according to ANSI B 6.5 / 50lbs Acier inoxydable.4408 (E) Aluminium AlSi0Mg (A) Stainless steel.4408 (E) Aluminium AlSi0Mg (A) Bride : Aluminium AlSi0Mg avec insert acier ou inox (A) Acier inoxydable.4408 (E) Flange: Aluminium AlSi0Mg with steel bushing (A) Stainless steel.4404 (E) Parties en contact avec le fluide = Ra 0,5 Wetted parts = Ra 0.5 Di D D3 DF nb d TK L (EE/AE) (AA) 40 40, ,7 98, /4" 50 0,22 3,4 2,5 2, , , , 20, /4" 60 0,36 5,3 3,9 3, , , , 39, /4" 73,5 0,44 5,9 5,3 3, , , 52, /4" 90 0,88 8, 7, 4, , , , 90, /4" 07,80,4 9,3 7,4 N de trous / Number of holes (AA) Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 4 VMC-fr/en_
5 Vanne à manchon pneumatique - Filetage intérieur (/N) Air operated Pinch Valve - Internal Thread (/N) DIN EN ISO 228 "" Raccord par filetage intérieur selon DIN EN ISO 228 "" ou ANSI/ASME B.20. "NPT" 0-00: Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) Internal Thread Connection according to DIN EN ISO 228 "" or ANSI/ASME B.20. "NPT" 0-00: Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Raccords: 0-00: Acier inoxydable.4404 (E) 20-50: Plastique POM naturel (P) 20-50: Palstique POM antistatique (P) pour les zones à risques d explosion (Internal Thread) Socket ends: 0-00: Stainless steel.4404 (E) 20-50: Plastic POM (P) natural white 20-50: Plastic POM (P) conductive for harzadous areas / Di D I T L Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 5 (ca./approx) (AP) ⅜" /8" 23 0,03 0, , ½" /8" 28 0,05 0, , ¾" /8" 3,5 0,07 0,9 0,5 0, " /8" 36,5 0,09,3 0,8 0, ¼" /4" 45 0,3,7, 0, ½" /4" 50 0,22 2,4,5, " /4" 60 0,36 3,6 2,2, ½" /4" 73,5 0,44 4, 3, " /4" 90 0,88 5,8 4, " /4" 07,80 9,0 6,9 - - Alternative la version K avec un encombrement de 50 mm / Alternatively available is our K-variant length = 50mm VMC-fr/en_
6 Vanne à manchon pneumatique - Clamp (T) Air operated Pinch Valve - Tri-Clamp connection (T) (a) DIN EN ISO 228 "" Raccord clamp selon DIN Série A DIN (BKS) / forme A (BKS) (a) sur demande 0-00: Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) Raccord clamp : 0-00: Acier inoxydable.4404 (E) Encombrement : 0: Selon DIN EN 558 Série : Selon DIN EN 558 Série 65-00: Selon DIN EN 558 Série 7 Tri-Clamp according to DIN row A DIN (BKS) / form A (BKS) (a) on request 0-00: Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Tri-Clamp Connection: 0-00: Stainless steel.4404 (E) Valve face to face length: 0: Acc. to DIN EN 558 row : Acc. to DIN EN 558 row 65-00: Acc. to DIN EN 558 row 7 Parties en contact avec le fluide = Ra 0,5. Finition polie Ra 0,3 sur demande ø Di D ø D3 L Wetted parts = Ra 0.5. Satin polished (brushed) Ra 0.3 on request. a /8" 23 0,03 0,5-0, /8" 28 0,05 0,9-0, /8" 3 0,07,0 0, , /8" 36 0,09,5, , /4" 45 0,3,9, , /4" 50 0,22 2,6, /4" 60 0,36 3,9 2, /4" 73,5 0,44 4,3 3, /4" 90 0,88 6,2 5, /4" 07,80 9,4 7,3 - Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 6 VMC-fr/en_
7 Vanne à manchon pneumatique - Clamp (TA) Air operated Pinch Valve - Tri-Clamp (TA) DIN EN ISO 228 "" Raccord clamp selon DIN Série C Tri-Clamp according to DIN row C 0-00: Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) 0-00: Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Raccord clamp : 0-00: Acier inoxydable.4404 (E) Tri-Clamp Connection: 0-00: Stainless steel.4404 (E) Parties en contact avec le fluide = Ra 0,5 Finition polie Ra 0,3 sur demande. Wetted parts = Ra 0.5 Satin polished (brushed) Ra 0.3 on request ø Di D ø D3 L 0 7, ,3 4,5 /8" 23 0,03 0,5-0,3 5 9, ,7 5,5 /8" 28 0,05 0,8-0,4 20 5, ,4 6 /8" 3 0,07,0 0, , , ,4 6 /8" 36 0,09,5, , , ,6 9 /4" 50 0,22 2,7, , ,6 9 /4" 60 0,36 4,0 2, , , ,6 9 /4" 73,5 0,44 4,6 3, , ,8 2 /4" 90 0,88 6,4 5, , ,6 4 /4" 07,80 9,7 7,7 - Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 7 VMC-fr/en_
8 Vanne à manchon pneumatique - Embout à souder (R) Air operated Pinch Valve - Weld-on ends (R) DIN EN ISO 228 "" Raccord à souder selon DIN 850 Série 2 Weld-on ends according to DIN 850 row : Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) Raccord à souder : 0-00: Acier inoxydable.4404 (E) Encombrement : 0: Selon DIN EN 558 Série : Selon DIN EN 2982 Série : Selon DIN EN 558 Série : Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Weld-on ends: 0-00: Stainless steel.4404 (E) Valve face to face length: 0: Acc. to DIN EN 558 row : Acc. to DIN EN 2982 row : Acc. to DIN EN 558 row 7 Parties en contact avec le fluide = Ra 0,5. Finition polie Ra 0,3 sur demande ø Di D ø D3 L Wetted parts = Ra 0.5. Satin polished (brushed) Ra 0.3 on request x, /8" 23 0,03 0,5-0, x, /8" 28 0,05 0,8-0, x, /8" 3 0,07,0 0, x, /8" 36 0,09,4 0, x, /4" 45 0,3,9, x, /4" 50 0,22 2,5, x, /4" 60 0,36 3,8 2, x /4" 73,5 0,44 4,2 3, x /4" 90 0,88 6,0 4, x /4" 07,80 9,3 7,2 - Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 8 VMC-fr/en_
9 Vanne à manchon pneumatique - Embout à souder (RA) Air operated Pinch Valve - Weld-on ends (RA) DIN EN ISO 228 "" Raccord à souder selon ASTM A554 Weld-on ends according to ASTM A : Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) 0-00: Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Raccord à souder : 0-00: Acier inoxydable.4404 (E) Weld-on ends: 0-00: Stainless steel.4404 (E) Parties en contact avec le fluide = Ra 0,5 Finition polie Ra 0,3 sur demande. Wetted parts = Ra 0.5 Satin polished (brushed) Ra 0.3 on request ø Di D ø D3 L 0 7, , ,6 4 /8" 23 0,03 0,5-0,2 5 9, , ,0 5 /8" 28 0,05 0,8-0,4 20 5, , ,4 6 /8" 3 0,07,0 0, , , ,4 6 /8" 36 0,09,5 0, , , ,2 8 /4" 50 0,22 2,6, , , ,6 9 /4" 60 0,36 3,9 2, , , ,6 9 /4" 73,5 0,44 4,3 3, , , ,4 /4" 90 0,88 6,2 5, , , ,2 3 /4" 07,80 9,6 7,5 - Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 9 VMC-fr/en_
10 Vanne à manchon pneumatique - Raccord fileté (M) Air operated Pinch Valve - Threaded spigot (M) (a) DIN EN ISO 228 "" Raccord fileté selon DIN 85 DIN 853- (S) / 864- forme A (S) (a) sur demande 0-00: Acier inoxydable.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastique POM naturel (P) 0-5: Palstique POM antistatique (P) Raccord fileté : 0-00: Acier inoxydable.4404 (E) Threaded spigot according to DIN 85 DIN 853- (S) / 864- form A (S) (a) on request 0-00: Stainless steel.4408 (E) 20-00: Aluminium AlSi0Mg (A) 0-5: Plastic POM (P) natural white 0-5: Plastic POM (P) conductive Threaded spigot: 0-00: Stainless steel.4404 (E) Encombrement : 0: Selon DIN EN 558 Série : Selon DIN EN 558 Série Valve face to face length: 0: Acc. to DIN EN 558 row : Acc. to DIN EN 558 row Parties en contact avec le fluide = Ra 0,5. Finition polie Ra 0,3 sur demande ø Di D D3 L Wetted parts = Ra 0.5. Satin polished (brushed) Ra 0.3 on request. a vol. (l) Rd28x/8" /8" ,03 0,5-0, Rd34x/8" /8" ,05 0,9-0, Rd44x/6" /8" ,07, 0, Rd52x/6" /8" ,09,6, Rd58x/6" /4" ,3 2,, Rd65x/6" /4" ,22 2,8, Rd78x/6" /4" ,36 4,2 2, Rd95x/6" /4" 73, ,44 4,9 4, Rd0x/4" /4" ,88 7,0 5, Rd30x/4" /4" ,80 0,6 8,5 - Z.A. des Tuiliers 5, rue ilardoni 6820 Retzwiller France Tél: +33 (0) Fax: +33 (0) info@ako-france.com Web: 0 VMC-fr/en_
Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
More informationAir operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More informationAir operated Pinch Valve type VMC
New! Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
More informationAir operated Pinch Valves
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Weld-on ends Threaded spigot (RJT Connection) Semi-Silo Trailer Connection Threaded hose nozzles AKO
More informationAir operated Pinch Valves Connection options:
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Connection Weld-on ends RJT Connection AKO Innovative Pinch Valve Technology The valve solution for
More informationNEW. EHEDG certified Aseptic and hygienic Pinch Valves. The flexible modular system. Aseptic design for hygienic safe processes
NEW EED certified Aseptic and hygienic Pinch Valves The flexible modular system Aseptic design for hygienic safe processes Connections: Weld-on ends Flange Tri-Clamp Threaded Spigot (RJT) Weld-on end Tri-Clamp
More informationValvola a manicotto pneumatica Serie VMC Air operated Pinch Valve of VMC Series
New! Valvola a manicotto pneumatica Serie VMC Air operated Pinch Valve of VMC Series Flange / Flange Filettatura interna / Internal Thread Triclamp / Tri-Clamp Raccordo a saldare / Weld-on ends Raccordo
More informationVannes à commande pneumatique pneumatically piloted valves
Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples
More informationPVC. I - 5. lijmfittings raccords à coller fittings for solvent welding BOCHTEN 90 COURBES A 90 BENDS 90 KNIEËN 90 COUDES A 90 ELBOWS 90
BOCHTEN 90 COURBES A 90 BENDS 90 Beide zijden lijmmof. Andere diameters op aanvraag. Deux côtés femelles à coller. Autres diamètres sur demande. Sockets for solvent welding. Other diameters on request.
More informationEDELSTAHL. Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL Aseptic and Sanitary Valves 1 51917.p65 1 4/16/0, :29 PM The Kämmer 191000 Series product line provides control valve solutions for sanitary and aseptic process systems. These valves meet the
More informationVÁLVULA BOLA BALL VALVE VANNE À BOULE
VANNE À BOULE www.inoxpa.com ÍNDICE / INDEX VÁLVULA BOLA VANNE À BOULE Conexiones / Connections / Connexions: DIN 11850 (Serie2) 4 DIN 11851 5 OD 9 SMS 12 ACCIONAMIENTO MANUAL MANUAL DRIVE COMMANDE MANUELLE
More informationBUTTERFLY VALVE + ADA PNEUMATIC ACTUATOR
1113-111 BUTTERFLY VALVE + ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTICS The double excentric 1113-11 + ADA is a high performance butterfly valve. It is dedicated to the automatic shut-off of high pressure
More informationDiaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationIn-line diaphragm seal with sterile connection For sanitary applications Model , aseptic connection per DIN 11864
Diaphragm seals In-line diaphragm seal with sterile connection For sanitary applications Model 981.51, aseptic connection per DIN 11864 WIKA data sheet DS 98.51 Applications For direct, quickly removable
More informationSCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design
DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
More informationPinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
More informationSBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationKNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
More informationIndex. Primary components - back sections Composantes principales - traverses ou meneaux
Thermally broken Split mullion curtain wall - Capped and SSG 2 /2" (63.5mm) profile. Available in 5 /4"(33.4mm) and 6 5/8"(68.3mm) depths. Mur-rideau à meneaux en deux sections avec bris thermique.vss
More informationMono Flanged Type Long Face to Face
Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical
More informationKEYSTONE FIGURE 9 BUTTERFLY VALVE
A resilient seated butterfly valve for general purpose applications FEATURES Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
More information-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
More informationManual Valves. The solution you ve been looking for
Manual Valves Larox manual valves Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances. Our advanced flow control solutions
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More informationpvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
More informationBonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
More informationAseptic Right Angle Valve 6051 with EHEDG-Certification DN 15 up to DN 50
Aseptic Right Angle Valve 6051 with EHEG-Certification 15 up to 50 Pneumatic control valve in right angle design with integrated microporcessor positioner type 8049 or as a shut-off valve for applications
More informationSANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR A - AS SERIES SELF-PRIMING PUMPS. Series A-AS
SANITARY SELF-PRIMING PUMPS CLOSED COUPLED WITH STANDARD MOTOR SERIES A - AS SELF-PRIMING PUMPS Series A-AS CSF INOX SPA PREFACE AND WARNING This publication does not constitute a contract proposal or
More informationKeystone Butterfly Valve Figure 9
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More informationDN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationSolid Clamps Raccords orientables
Solid Clamps Raccords orientables Versions: Raccords orientables Éléments monoblocs Pour un montage plus rapide et économique Série industrie Fonte d aluminium Grande diversité Éléments monoblocs Éléments
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationLong Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationThe pumping action of the B series lobe displacement pump is achieved thanks to the counter-rotation of
INDUSTRY APPLICATION Rotary lobe pumps type B are positive displacement pumps for liquids of any viscosity with lubricating and non-lubricating properties. Lobe pumps are used in the chemical, pharmaceutical
More information1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /
1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available
More informationShort Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014
Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationPinch valves VZQA. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ piston actuated 2/2-way diaphragm valve is designed for use in sterile areas of application. All metallic actuator components are made of stainless steel. The
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationLes tables linéaires sans entraînement
Les tables linéaires sans entraînement linear tables without drivin www.fli-industrie.fr 9B9 PALIERS TANDEM COMPACTS - TANDEM COMPACT HOUSING UNITS SMCC Ø d A H H1 L L1 M X SMCC12 12 28 15 30 80 40 M5
More information611, 671. Diaphragm Valve, Metal
Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE Date 30.11.2015 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationMANUAL VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al es MANUAL VALVES The solution you ve been looking for LAROX MANUAL VALVES Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances.
More informationSBP Butterfly Valves 1" 42"
PRODUCT MANUAL PM SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 us SBP Butterfly Valves 1" 42" are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive
More informationThe ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications.
Butterfly Valve ParaSeal range The ParaSeal range features a proven disc shaft and seat arrangement, to be used in high pressure and high velocity applications. Features The field replaceable seat fully
More informationFULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More information-H- Note. Pinch valves VZQA Features
Features Application Design Areas of application The valve can be used to control liquid and dusty media, solids and material mixtures Easy-to-clean housing (clean design) Open or closed in normal position
More informationLISTE DES PIÈCES DE RECHANGE
LISTE DES PIÈCES DE RECHANGE Mar 2017/ Mars 2018 48-S 174 48-R 524 48-R 522 48-S175 48-S 174 48-S 175 48-R 526 48-S 174 48-R 523 48R522 48R523 48S174 48S175 48R524 48R526 SCREEN-PRINTED PANEL PANNEAU IMPRIMÉ
More informationSN SN 600 SN SN 300
SNG 500 - SNG 600 SNU 500 - SNU 600 SNA 500 - SNA 600 SN 500 - SN 600 SN 200 - SN 300 SD 3100 SD 3000 114 DISPOSITIFS D'ÉTANCHÉITÉ - SEALING ARRANGEMENTS Joint en polyuréthane TSNG pour: SNG-SNU TSNG polyurethan
More informationCylindrical Valves SCP Series
SCP: Product Info 22 Cylindrical Valves, plastomer-lined PM 22 M.00 e May 2004 Cylindrical Valves SCP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even
More informationKeystone Figure 9 Butterfly Valve
A resilient seated butterfly valve for general purpose applications Features Bubble-tight shut-off at full pressure rating (PTFE lined configuration is drop tight). The seat and the disc are the only two
More informationInline Sampling Valves SSV Series, full-port design
SSV: Product Info 81 Inline Sampling Valves, full-port PM 81 M.00 e Inline Sampling Valves SSV Series, full-port design for safe and representative sampling of aggressive or even toxic liquids from pipelines
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationBall Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationOPTIFLUX 6000 Technical Datasheet
OPTIFLUX 6000 Technical Datasheet Electromagnetic flow sensor for hygienic and sanitary applications Robust stainless steel housing for hygienic and aseptic operation Fully suitable for CIP and SIP Typical
More informationFLUSH MOUNTED TC CONNECTION. Function: blind cap. Design: Requirement:
TK CONNECTION FLUSH MOUNTED TC CONNECTION Syringe device on TK connection sampling valve on TK Connection Typ. installation Function: Hygienic device features a compact design that allow the installation
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-2 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationPowder and Bulk Technology
Powder and Bulk Technology LIQUID MEDIA BUTTERFLY VALVE BULK MATERIAL WELCOME TO The Company Since more than 40 year we are manufacturing shut-off valves of highest quality which are installed successfully
More informationKEYSTONE BUTTERFLY VALVE PARASEAL RANGE
The ParaSeal range features a proven disc, shaft and seat arrangement designed for use in high pressure and high velocity applications FEATURES GENERAL APPLICATION Water, food and beverage processing,
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE 06.03.2017 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
More informationKnife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationStandard Dimension Ratio: SDR = 2 S + 1 = D. L = 5 m, andere lengten op aanvraag Volgens DIN 8077/78 type 1 ; ISO R161/1-1978
buizen tuyaux pipes PP-H HARD DRUKBUIS PVC - GRIJS DONKERGRIJS RAL 7032 RAL 7011 TUYAUX PVC RIGIDE PRESSION GRIS FONCÉ - GRIS RAL 7011 7032 U-PVC PRESSURE PIPE DARK - GREY GREY RAL RAL 7032 7011 S= 1/2
More informationID & IP SERIES IN-LINE DISC AND PISTON VALVES
ID & IP SERIES IN-LINE DISC AND PISTON VALVES IN-LINE DISC AND PISTON VALVES M SEAL IN-LINE PISTON VALVE CODE: IPYM Large valves utilize a non-rising stem to minimize overall length Live loaded packing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-3 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty
More informationProcess pressure. Overview 168 VEGABAR series VEGABAR series Accessory 184. Process pressure VEGABAR
Process pressure Overview 168 VEGABAR series 10 170 VEGABAR series 50 174 Accessory 184 Process pressure VEGABAR 167 VEGABAR Level and pressure measurements Measuring principle The pressure measuring cell
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationSURFOX D 315 (USA/CANADA/MEXICO)
SURFOX 305 54-D 315 (USA/CANADA/MEXICO) MAR 2018 48R581 48S174 48R580 48S175 48S175 48S174 48S175 48R526 48S174 48R577 48R577 48R580 48S174 48S175 48R581 48R526 SCREEN-PRINTED BASE FOR S305 BASE IMPRIMÉE
More informationTilis Butterfly valves DN32 to 300 mm
Butterfly valves 32 to 300 mm Summary COATING Internal External Sale leaflet p.2 Spare parts list p.3 Overall dimensions p.4 Top connections of the actuators p.5 Actuators p.6 Connecting flanges p.7 Normalisation
More informationAngle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationPNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
More informationEDELSTAHL a. Flow Control Division. Kammer Control Valves. Kämmer Series Kämmer Series Aseptic and Sanitary Valves
EDELSTAHL a Aseptic and Sanitary Valves 1 In many of today s clinical laboratories or biotech pilot plants, valves and related equipment are manually cleaned with a caustic solution, flushed and sterilized
More informationSINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationACCOUPLEMENTS COUPLINGS ASYBCO
ACCOUPLEMENTS COUPLINGS ASYBCO PETROLEUM TANKER PRODUCTS Bayco BAYCO Bayco COUPLINGS RACCORDS BAYCO Adapteur / Adaptor A Raccord / Coupler B Racoord / Shank Coupler C Raccord / Coupler D Adapteur à
More informationCDS/CDSV/CDS mm
Valves of stainless steel COMPACT-Program SUT-O VALVES, STAINLESS STEEL (with through-going valve plate) CDS/CDSV/CDSR Shut-Off-Valves 50 1000 mm with through-going valve p GO WIT OUR LOW Valves of stainless
More informationBrewSeal butterfly valves Wafer and lugged
Wafer and lugged KEYSTONE Resilient seated butterfly valves DN40-DN800 wafer and lugged versions, optimized for the food and beverage industry. Features Top bushing absorbs actuator side thrust loads.
More informationBUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
More informationPISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles
More informationDiaphragm Valve SISTO-16. PN16 Maintenance-free With or without Lining Flanged Ends With Handwheel or Actuator. Type Series Booklet
Diaphragm Valve SISTO-16 PN16 Maintenance-free With or without Lining Flanged Ends With Handwheel or Actuator Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16 All rights reserved.
More informationFEDERATION INTERNATIONALE DE L AUTOMOBILE
FEDERATION INTERNATIONALE DE L AUTOMOBILE Date 05.12.2016 FICHE DE PRESENTATION DES SYSTEMES D EXTINCTION FIXES (NORME FIA 8865-2015) PRESENTATION FORM FOR PLUMBED-IN FIRE EXTINGUISHER SYSTEMS (FIA STANDARD
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More information76.116/1. BUE: Flanged three-way valves, PN 16/10. Sauter Components
76.116/1 BUE: Flanged three-way valves, PN 16/10 How energy efficiency is improved Accurate control with high reliability. Areas of application Continuous control of cold/hot water, air and low-pressure
More informationDiaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100
Pressure Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100 WIKA data sheet PM 04.16 Applications for further approvals see page 10 Hygienic pressure measurement in sanitary
More informationAUTOMATIC VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al s AUTOMATIC VALVES The solution you ve been looking for LAROX AUTOMATIC VALVES Larox automatic valves are ideal for shut off or control applications that involve abrasive or corrosive slurries, powders
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More information