LUKOIL Marine Lubricants PRODUCTS.

Transcription

1 LUKOIL Marine Lubricants PRODUCTS

2 03 STRUCTURE 04 GENERAL 05 MAIN GRADES 06 SECONDARY GRADES MINERAL OILS SYNTHETIC OILS AND SPECIALITIES GREASES 10 SCOSITY CLASSIFICATION 11 SCOSITY TEMPERATURE DIAGRAM ABOUT Publisher LUKOIL Marine Lubricants Limited Hamburg Branch Office Grosse Bäckerstrasse Hamburg, Germany Phone + 49 (0) Fax + 49 (0) LubOilOrder@LUKOIL.com Photo LUKOIL Marine Lubricants Limited This brochure and the information given are considered to be accurate to the best of our knowledge, no warranty expressed or implied, is given as to the accuracy or completeness of the information or suitability of the products.

3 04 GENERAL MAIN GRADES 05 GENERAL MAIN GRADES LUKOIL Marine Lubricants offers a full range of the highest quality marine products in all major ports around the globe. As your trusted partner we ensure the best possible service. This Product brochure provides technical information about our Marine grade range. Further detailed technical information on each product can be obtained from the relevant product data sheet (PDS) or the Material and Safety Datasheet (MSDS) that describes the product in regards to safety in use, handling and transport. HEALTH, SAFETY AND ENRONMENT PROTECTIONS LUKOIL Marine Lubricants operates in strict compliance with LUKOIL s Health, Safety and Environment policy. Operating procedures will act to ensure the health and safety of employees, contractors, customers and the public. LUKOIL Marine Lubricants will also act in a socially responsible manner in protecting the environment and preserving natural resources. A comprehensive Health, Safety and Environment Management System has been developed and is operated worldwide to achieve and maintain these objectives. LUKOIL Marine Lubricants encourages open dialogue with all parties on matters of health, safety and the environment. For more information, please visit The user is responsible for evaluating and using products in a safe manner and is expected to comply with all applicable laws and regulations. On request, a Safety Data Sheet is available for all products. It describes the product in terms of safety in use, handling and transportation. For further information about LUKOIL Marine Lubricants, please contact your LUKOIL Marine Lubricants representative or visit our website at Marine Cylinder Lubricants NAGO 100 MCL NAGO 70 MCL NAGO 50 MCL NAGO 40 MCL System Oil NAGO 6 SO , Trunk Piston Engine Oils NAGO TPEO 55/ , NAGO TPEO 50/ , NAGO TPEO 40/ , NAGO TPEO 30/ , NAGO TPEO 20/ , NAGO TPEO 15/ , NAGO TPEO 12/ , COC in COC in COC in An entire range of Marine Cylinder Lubricants for low speed engines with excellent deposit control, anti wear properties and scuffing prevention to fulfill individual customer needs. A 40 MCL called NAGO 40 MCL for distillate fuel and low sulphur fuel, a mid range MCL called NAGO 50 MCL and a standard MCL called NAGO 70 MCL both covering from 0,5% up to 3,5% sulphur fuel. The NAGO 100 MCL can help to optimize wear rate and operational cost depending on fuel quality and engine design. Alkaline marine crankcase lubricant for slow speed engines. Outstanding thermal- and oxidation stability and detergency. NAGO TPEO range for the usage on highly rated medium speed diesel engines. These oils provide an excellent thermal- and oxidation stability with outstanding detergency and dispersancy. This leads to a exceptional deposit control especially in oil-cooled piston undercrowns. The range promises optimal adaption to the sulphur content of the fuel in use due to the range exeeding from 12 to 55. Note: While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the the accuracy of the information or the suitability of the products. NAGO TPEO 30/ , NAGO TPEO 20/ , NAGO TPEO 15/ , NAGO TPEO 12/ , NAGO TPEO 40 ULTRA , NAGO TPEO 30 ULTRA , AVANTGARDE M , AVANTGARDE M , NAGO TPEO 30 ULTRA and 40 ULTRA are high quality alkaline lubricant recommended for marine trunk piston engines running on ISO 8217 type DMA/DMB/DMC fuels, especially designed for applications where a higher level of detergency/ dispersancy and liner lacquer control is needed. AVANTGARDE M30 and M40 are high performance SHPD monograde engine oils for the usage on high speed marine and power generation four-stroke turbocharged engines of latest generation.

4 06 MAIN GRADES SECONDARY GRADES 07 Other Engine Oils NAGO DD 40 AVANTGARDE ULTRA 15W40 TI Truck SAE 15W40 TI Cargo MC 10W40 TI 2T 100S LATITUDE 2T Special , W , W , W , ,5 8, , COC in NAGO DD is a heavy duty low ash detergent diesel engine oil specifically formulated to meet the latest Detroit Diesel two-cycle lubricant recommendations. All Season SHPD Engine Oil. Optimal for auxiliary - and emergency generator engines as well as lifeboat propulsion. API CI-4/SL specified. All Season SHPD Engine Oil with high alloy ratio. Optimal for auxiliary - and emergency generator engines as well as lifeboat propulsion. API CH-4/SL specified. Long life and fuel economy oil for high speed diesel engines with outstanding cold start performance. High performance 2-Stroke engine oil, burns without leaving deposits on the spark plug. Best adapted for Outboard engines. TC-W3. Gear Oils RENOLIN CLP , , RENOLIN CLP , , RENOLIN CLP , , RENOLIN CLP , , RENOLIN CLP , RENOLIN CLP , , RENOLIN CLP , , TI Supergear 80W90 Transmission Fluid TI ATF 4000 Turbine Oils ISO VG mgkoh/g 15 cst at 40 cst at , ,8 7, ISO VG mgkoh/g 15 cst at 40 cst at 100 RENOLIN Eterna , , RENOLIN Eterna , , RENOLIN Eterna , , COC in COC in High performance gear oils with outstanding extreme pressure characteristics and load carrying capacity. Recommended for spur-, helical- and bevel enclosed gears with circulation or splash lubrication. Operating temperatures up to 100 and peaks above 120. RENOLIN CLP oils can be used for all applictions where CLP oil according DIN are recommended. These products meet and exceed all up to date requirements of the well known gear and bearing manufacturers. CKC/CKD according ISO Mineral universal gear oil for transmission and axle gearboxes. For usage on Outboard motors. SAE 80W90 classified. Multi purpose transmission fluid, recommended whenever DEXRON III performance is required. New generation turbine oil for gas, steam and expansion turbines as well as turbo chargers. SECONDARY GRADES MINERAL OILS Heat Transfer Oils ASSISTO THERM 5 32 <0, ,5 5, RENOLIN Therm ,7 6, ASSISTO THERM LT ISO VG mgkoh/g 15 cst at 40 cst at <0, COC in High performance heat transfer fluid for the use in closed heat transfer systems with or without forced circulation. According Q DIN Heat transfer oil with exceptional low temperature properties. Hydraulic Oils RENOLIN B 15 H 15 0, , RENOLIN B 22 H 22 0, , RENOLIN B 32 H 32 0, , RENOLIN B 46 H 46 0, , RENOLIN B 68 H 68 0, RENOLIN B 100 H 100 0, , RENOLIN B 150 H 150 0, , Low Temperature Hydraulic Oils ISO VG mgkoh/g 15 cst at 40 cst at 100 RENOLIN MR , , RENOLIN MR , COC in Multigrade hydraulic fluids for usage in a wide temperature range and severe load conditions. Also suitable for general lubrication of bearings and gearboxes when a high viscosity index and good load carrying capacity is required. DENISON HF0 approved. Multigrade oil for hydraulic systems, bearings and transmissions with excellent low temperature behaviour. Extremly high viscosity index. Air Compressor Oils RENOLIN , , RENOLIN , , RENOLIN , , Refrigiration Oils ISO VG mgkoh/g 15 cst at 40 cst at 100 ISO VG mgkoh/g 15 cst at 40 cst at 100 RENISO KM , , RENISO KS , , RENISO KC , , COC in COC in VDL-Air compressor oils according DIN for piston and rotation compressors. For final compression temperatures up to 220. This products are based on special mineral oils. Special naphtenic refrigiration oils for the usage with Ammonia NH 3 (R717) and CFC/HCFC (R12/R22) refrigerants in open, semi-hermetric and hermetric compressors.

5 08 SECONDARY GRADES SYNTHETIC OILS, SPECIALITIES AND GREASES SECONDARY GRADES 09 Gear Oils RENOLIN Unysin CLP , , RENOLIN Unysin CLP , Air Compressor Oils ISO VG mgkoh/g 15 cst at 40 cst at 100 ISO VG mgkoh/g 15 cst at 40 cst at 100 RENOLIN Unisyn OL , ,9 146 < RENOLIN Unisyn OL , ,6 144 < NASYN DE , RENOLIN SE , COC in COC in Fully synthetic gear oils based on polyalphaolefin for application where a high lifetime CLP-HC type according DIN is required. Synthetic PAO Compressor oil for usage in flooded or oil injectjon screw type air compressors. Synthetic ester based air compressor oil for usage in reciprocating, rotary and screw compressors dependent upon viscosity requirements. Rapidly Biodegrading Hydraulic Oils PLANTOSYN 46 H PLANTOSYN 68 H Rapidly Biodegrading Gear Oils ISO VG mgkoh/g 15 cst at 40 cst at , , , , ISO VG mgkoh/g 15 cst at 40 cst at 100 PLANTOGEAR 100 S , >280 PLANTOGEAR 150 S >280 PLANTOGEAR 220 S , >280 COC in COC in High performance, rapidly biodegrading hydraulic and lubricating oils based on saturated synthetic esters. Fully compliant with ISO15380: HEES and OECD-Guideline 301C. ISO VG 46 holding the German Blue Angel eco lable. Also applicable for high loaded gears with FZG-Stage >12. High performance, rapidly biodegrading synthetic ester based gear oil, PLANTO-GEAR S oils are fully compliant with the DIN standard and are Flender approved. NLGI Dropping Temperature Range Base Oil Viscosity Color Thickener Refrigiration Oils RENISO Triton SEZ , , RENISO Triton SE , RENISO Triton SEZ , ,6 9, RENISO Triton SEZ , , RENISO Triton SE , , RENISO Triton SE , , RENISO S 68 RENISO SP 100 Gas Compressor Oil RENOLIN LPG 185 ISO VG mgkoh/g 15 cst at 40 cst at 100 ISO VG mgkoh/g 15 cst at 40 cst at 100 COC in 68 0, , , , COC in 185 0, , Chlorine free, Polyolester based refrigirating oils for the usage with chlorine free HFC refrigerants as R134a, R404A, R410A etc. Depending on the viscosity RENISO Triton can be used on hermetrical, semi hermetrical and open piston compressors as well as screw type and turbo compressors. The product has excellent compability with elastomeres and all materials used in refrigiration circuits. Alkylbenzene-based synthetic refrigirating oil for chlorine containing refrigirants as R22, R502, R401A/B, R402A/B in addition to usage with iso-buthane (R600a) and propane (R290). RENISO S 68 can also be used for NH 3 (R717). High performance gas compressor oil based on polyalkylene glycol. Usage with hydrocarbon chemical gases (propane, butane, ethylene and mixtures), petroleum gases and natural gases with a high ammount of methane as well as other chemical gases (NH 3, butadiene). The oil is applicable on piston, screw and vane compressors. Greases NAGREASE CSX 2 RENOLIT CXI 2 NAGREASE EP 2 RENOLIT FLM 2 RENOLIT H 443-HD88 RENOLIT EP X1 PBF RENOLIT CX-EP 0 RENOLIT LZR 000 Rapidly biodegrading Grease PLANTOGEL 2S cst at 40 Multi purpose grease for all points 2 > to brown Ca sulponate complex requiring a high performance concerning water resistance, working stability, EP and AW properties. 2 > to brown Ca sulponate complex 2 > to brown lithium 2 > to black lithium with MoS > to green lithium 1 > to black lithium 0 > to brown Ca sulponate complex 00/000 > to green lithium calcium 2 > to white lithium calcium For plain and roller bearings under high load in humid atmosphere. For plain and roller bearings with extended re-greasing intervals. For plain and roller bearings under high load in humid atmosphere. Coupling grease with outstanding performance on high rotation speeds due to exeptional basoil viscosity. For usage on bearing points and gears, stressed by temperatures and pressure. For usage in centralised lubrication systems. Enviromentally harmless EP grease, based on biodegrading synthetic esters, Excellent performance on wire ropes, compliant with latest US regulations. ISO VG mgkoh/g 15 cst at 40 cst at 100 COC in ISO VG mgkoh/g 15 cst at 40 cst at 100 COC in Stern Tube Oil Corrosion Protection RENOLIN CLP 220 Plus 220 0, , Emulgating Stern Tube Oil, Provides 95% of Load capacity when mixed with 5% Water. ANTICORIT DFW Barium free corrosion preventive and dewatering fluid leaving a waxy film based on iso-parafin as solvent.

6 10 SCOSITY CLASSIFICATION SCOSITY CLASSIFICATION Note The kinematic viscosity at 40 and 100 are related horizontally for 95 Oils. The SAE specifications are at 100 only and Multigrade Oil viscosities are not representative at other temperatures. SCOSITY TEMPERATURE DIAGRAM 11 SCOSITY TEMPERATURE DIAGRAM