WPS100 / WPS100S. Features: EP Series

Transcription

1 Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion resistance Vibration isolators between the enginealternator and base frame Integrated wiring design Base fuel tank for at least 8 hours running Equipped with an industrial muffler Engine oil pump 50 radiator Top lifting and steel base frame with forklift holes Drainage for fuel tank Complete protection functions and safety labels IP54 (soundproof sets), IP56 (control system) Water jacket preheater, oil heater and double air Output Ratings Generating Set Model WPS00S cleaner, etc. are available. Standby 00kVA80kW 0kVA88kW Ratings at 0.8 power factor. Dimensions and Weights Ratings and Performance Data Engine Make & Model: 006TG2A Alternator Model: LSA44.2VS45 Alternator Brand: Leroy Somer Control System: PLC-920 PLC-7420 Noise Level@7m: Circuit Breaker Type: Frequency & Phase: 50Hz & 3PH Engine Speed: RPM 500 WPS00 B WPS00S R WPS WPS00S 550 Prime Standby Structure Type: Fuel Tank Capacity: L Fuel Consumption: lhr (00% Load) Prime Also available in the following voltages: 45240V V-22027V-2005V; ESP: Standby Power Standby duty, operation under variable load, without over load; PRP: Prime Power-Continuous duty operation, under variable load 2424h-0% over load permissible hour2 hours; The data is only for your reference but not for use of sales. M: Mechanical speed governor, EECU: Electronic speed governor; NA: Naturally aspirated, TC: Turbocharged, TCA: Turbocharged and air-air aftercooled. TCW: Water-cooled Turbocharged; The weights are approximate and without fuel Generating Set Model Length (L) mm (in) Width (W) mm (in) Height (H) mm (in) Dry kg (lb) WPS WPS00S Dry = With Lube Oil Wet = With Lube Oil and Coolant Wet kg (lb)

2 Engine model: 006TG2A Cooling system Radiator -face area ,39 m² (3.36 ft²) -rows and materials brass -gillsinch and material copper -width of matrix mm (22 in) -height of matrix mm (27.5 in) -pressure cap setting kpa (0.8 lbfin²) -maximum top tank temperature C (207 F) Estimated cooling air flow reserve (see caution on the bottom of the front page) ,5 kpa (0.59 in H ² O) Fan -diameter mm (22 in) -drive ratio : -number of blades material plastic Coolant Maximum pressure head at pump ,7 m (38.5 ft) Total system capacity ,7 litres (48.7 UK pints) -draindown capacity ,6 litres (48.5 UK pints) Minimum temperature to engine C (58 F) Temperature rise across engine ,7 C (3.8 F) Max permissible external system resistance kpa (5 lbfin²) Thermostat operation range C (80-99 F) Electrical system -type negative ground -alternator V options -starter motor V options Cold start recommendations Minimum starting temperature C F Grade of engine lubricating oil Exhaust system BS39 Cold start amps Battery specifications SAEJ537 Cold cranking amps Number of batteries needed Perkins Type W B W B W D W D Fuel system Type of injection direct Fuel injection pump rotary type Fuel atomiser Multi-hole Nozzle opening pressure ,3 MPa (250 atm) Fuel lift pump -deliveryhour ,4 litres (25 UK pints) -pressure kpa (4.35 lbfin²) Maximum suction head ,8 m (6 ft) Maximum static pressure head m (9.8 ft) Diesel Fuel to conform to BS Class A2 or ASTM D975 66T Number 2D. Governor type mechanical integral with fuel injection pump -Governing conforms to iso (E) Class G2 Induction system Maximum air intake restriction at engine -clean filter kpa (2 in H ² O) -dirty filter kpa (20 in H ² O) -air filter type dry element -minimum dirt capacity gm 3 min -turbocharger Garret Airesearch TO4BL30.8F Lubrication system Lubricating oil capacity -total system , litres (28.3 UK pints) -sump only , litres (23 UK pints) Maximum engine operating angles -front up, front down, right side or left side Lubricating oil pressure -relief valve opens kpa (50-59 lbfin²) -at maximum no-load speed kpa (43-49 lbfin²) -idle speed kpa (9-3 lbfin²) Lubricating oil temperature -normal oil temperature C (22 F) -maximum C (257 F) Oil consumption as a % of fuel consumption % max Recommended SAE viscosity A Single of multigrade oil which conforms to API CDSE or CCMC D4 must be used. Maximum back pressure for total system kpa (.77 in Hg) Inside diameter of outlet at maximum rating mm (3.07 in) Note: Changes to induction restriction, exhaust back pressure and fuel viscositytemperaturespecific gravity, can affect power output. For further details contact Perkins Technical Service Department.

3 Alternator model: LSA44.2VS45 SPECIALLY ADAPTED FOR APPLICATIONS The LSA 44.2 alternator is designed to be suitable for typical generator applications, such as: backup, standard production, cogeneration, marine applications, rental, telecommunications, etc. COMPLIANT WITH INTERNATIONAL STANDARDS The LSA 44.2 alternator conforms to the main international standards and regulations: IEC 60034, NEMA MG.22, ISO 8528, CSAUL on request, marine regulations, etc. It can be integrated into a CE marked generator. The LSA 44.2 is designed, manufactured and marketed in an ISO 900 environment. TOP OF THE RANGE ELECTRICAL PERFORMANCE - Class H insulation. - Standard 2-wire re-connectable winding, 23 pitch, type no Voltage range: 220 V V and 380 V - 45 V (440 V) - 50 Hz 208 V V and 380 V V - 60 Hz. - Other voltages are possible with optional adapted windings: - 50 Hz: 440 V (no. 7), 500 V (no. 9), 600 V (no. 22 or 23), 690 V (no. 0 or 52) - 60 Hz: 380 V and 46 V (no. 8), 600 V (no. 9). - Total harmonic distorsion HDT < 2%. - R 79 interference suppression conforming to standard EN 550 group class B standard for European zone (CE marking). EXCITATION AND REGULATION SYSTEM SUITED TO THE APPLICATION Excitation system Regulation options Voltage regulator SHUNT AREP PMG T.I. Current transformer for paralleling R 726 Mains paralleling R 73 3-phase sensing R phase sensing on mains paralleling unbalanced P Remote voltage potentiometer R 250 Std R Std Std D 50 - optional optional included included NA Voltage regulator accuracy % - : possible adaptation - NA : not possible. PROTECTION SYSTEM SUITED TO THE ENVIRONMENT - The LSA is IP Standard winding protection for clean environments with relative humidity 95 %, including indoor marine environments. Options: Filters on air inlet : derating 5%. Filters on air inlet and air outlet (IP 44) : derating 0%. Winding protections for harsh environments and relative humidity greater than 95%. Space heaters. Thermal protection for windings and shields. REINFORCED MECHANICAL STRUCTURE USING FINITE ELEMENT MODELLING - Compact and rigid assembly to better withstand generator vibrations. - Steel frame. - Twin-bearing and single-bearing versions designed to be suitable for engines on the market. - Half-key balancing. - Greased for life bearings. - Regreasable bearing option available on SHUNT and AREP versions, not available with PMG. ACCESSIBLE TERMINAL BOX PROPORTIONED FOR OPTIONAL EQUIPMENT - Easy access to the voltage regulator and to the connections. - Possible clusion of accessories for paralleling, protection and measurement. - 8 way terminal block for reconnecting voltage reconnection. - D 50 digital AVR adapted to the machine exterior

4 Control System function list WPS00 WPS00S Control System PLC-920 (Optional) PowerLink PLC-920 generator controllers integrating digital, intelligent and network techniques are used as the automatic control systems for diesel generators. It can carry out functions including pre-alarm, warning & electrical trip, fail monitoring and controls etc. FEATURES Parameter configuration via RS-232 serial communication; Log last 50 events & alarm information with measured values; Statistics records; Remote startstop; Speed sensing from alternator voltage or magnetic pickup; Configurable 3 inputs and 6 outputs; ECU powers, ECU stop, STOP or fuel solenoid selection; Automatic transfer switching control and engine control; Adjustable start, load and stop timers. SPECIFICATION Dimensions: mm*8mm*6mm Protection: IP65 at front panel Operating temperature: -20 to 70 Max. Operating current is 360mA Sender measurement: 0 to 300 ohm FUNCTION Pre-Alarm Engine temperature Oil pressure Overunder voltage Overunder frequency Overunder speed Warning & Electrical trip Over current Short circuit Error Overunder speed Speed loss Battery low Battery high Maintenance Over current Short circuit Engine stop Can bus Charge alternator Panel cut-out: 8mm*70mm Weight: approximately 0.3kg DC battery supply voltage: 8 to 32Vdc CT secondary: 5A Accuracy: %FS, resolution: ohm Fail monitoring Emergency stop Multiple engage fail Failed to start Low oil pressure High temperature Speed failure Voltage Charging fail Shutdown Warning Controls Fuel and stop solenoid ECU power and stop Starter motor Automatic generator start Preheat External alarm horn Engine cooling Idle mode General accessory Operator Interface Measurement and Instrumentation Shutdown Protection and Indication Threshold Warning&Indication Paralleling Capability Power Transfer Function Environment Monitoring Function MODEL AVR Electronic Governing Glow plug control Cycle Cranking MODBUS Networking Fault History manual startstop Autoremote start Regular Test Auto operation LED Manual operation LED Common Shutdown LED Common warning LED Fail to start LED Emergency stop(local) Alphanumeric screen Remote start input active LED Alarm reset Oil pressure Water Temperture Engine Speed Engine Engine Altamator Altamator Mains Expression Hours Run Number of Starts Battery Voltage Coolant Temperature 3PhaseL-L Voltage&Frequency 3phase Current Frequency kwh Apparent Power Active Power and Reactive Power Power Factor Per PhasekW, kwr Per Phase kva Phase Voltage Output Power Grid Line Voltage Grid Phase Voltage Grid Frequency Low Fuel Level High Fuel Level Low Oil Pressure High Water Temperature Failure to Stop Failure to Start Controlable start circlestimes Overspeed Under&Over Voltage Under&Over Frequency Overcurrent Earth Leakage Reverse Power Reverse kwr Low Oil Pressure Low Water Temperature High Water Temperature Low Water Level LowHigh Battery Voltage Failure to Charge Overcurrent Overload Genset UnderOver Voltage Genset UnderOver Frequency underover Speed High Engine Temperature Earth Leakage Synchroscope(Independent Bus) Active and Reactive Power Control Synchroscope(Shared Bus) Synchronization Dector Peak Lopping Automatic Transfer Hard Closed Transition Soft Closed Transtion GenMains Breaker GenMains Breaker Status Protection SpeedVoltage Control Power Indication Fuel&solenoid Valve Control Startor Control Preheating Mains Transfer Switch (Standard) Mains Transfer Switch (Emergency) Operating Temperature ( ) Ambient Temperature ( ) Humidity 80% Grid OverUnder Voltage Control Grid OverUnder Frequency Control Remote Start Output(LoadNo-load) Optional Relay Output Remote Telecom Control with All Functions Engine Instrument Monitoring Altemator Output Instrument Monitoring Connection Point with All-around Setting For 6 Users 3 Users Input Connection Point LCD Light Control of Low Light Operation Environment Safe PIN Code RS Interface Language Selection Multi-Language Function PLC-920 PLC-7420 Standard Optional Impossible

5 Control System Digital, intelligent control system allows easier operation. PLC-7420 FEATURES Microprocessor control, with high stability and credibility Monitoring and measuring operational parameters of the mains supply and genset Indicating operation status, fault conditions, all parameters and alarms Multiple protections; multiple parameters display, like pressure, temp. etc. Manual, automatic and remote work mode selectable Real time clock for time and date display, overall runtime display, 250 log entries Overall power output display Integral speedfrequency detecting, telling status of start, rated operation, overspeed etc. Communication with PC via RS485 OR RS232 interface, using MODBUS protocol PLC-7420 is an advanced control module based on micro-processor, containing all necessary functions for protection of the genset and the breaker control. It can monitor the mains supply, breaker control. and automatically start the engine when the mains is abnormal. Accurately measure various operational parameters and display all values and alarms information on the LCD. In addition, the control module can automaticallyshut down the engine and indicate the engine failure.

6 Optional Engine Alternator Generator Set Fuel System Canopy Water Jacket Preheater Oil Preheater Winding Temperature Measuring Instrument Alternator Preheater PMG Anti-damp and anti-corrosion treatment Anti-condensation heater Tools with the machine Low fuel level alarm Automatic fuel feeding system Fuel T-valves Trailer Lubricating System Exhaust System Cooling System Control Panel Voltages Oil with the machine Protection board from hotness Front heat protection Coolant (-30 C) Remote control panel PLC-920 PLC-7420 ATS 45240V V V 22027V 200-5V The following lists are optional by the needs of customers. Engine Model: 006TG2A Minor Repair 000 hrs optional No. Part Name Part No. Qty Remark Fuel Filter Oil Filter Air Filter BELT SEAL - ROCKER BOX COVER GASKET - CYLINDER HEAD THERMOSTAT FRONT OIL SEAL SEAL - REAR END OIL B66 368C H F F PowerLink reserves the right to make changes in model, technical sepcification, color, configuration and accessories without prior notice. Please contact the salesman before ordering. May.203

7 Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion resistance Vibration isolators between the enginealternator and base frame Integrated wiring design Base fuel tank for at least 8 hours running Equipped with an industrial muffler Engine oil pump 50 radiator Top lifting and steel base frame with forklift holes Drainage for fuel tank Complete protection functions and safety labels IP54 (soundproof sets), IP56 (control system) Water jacket preheater, oil heater and double air Output Ratings Generating Set Model WPS00S cleaner, etc. are available. Standby 00kVA80kW 0kVA88kW Ratings at 0.8 power factor. Dimensions and Weights Ratings and Performance Data Engine Make & Model: 04C-44TAG2 Alternator Model: LSA44.2VS45 Alternator Brand: Leroy Somer Control System: PLC-920 PLC-7420 Noise Level@7m: Circuit Breaker Type: Frequency & Phase: 50Hz & 3PH Engine Speed: RPM 500 WPS00 B WPS00S R WPS WPS00S 220 Prime Standby Structure Type: Fuel Tank Capacity: L Fuel Consumption: lhr (00% Load) Prime Also available in the following voltages: 45240V V-22027V-2005V; ESP: Standby Power Standby duty, operation under variable load, without over load; PRP: Prime Power-Continuous duty operation, under variable load 2424h-0% over load permissible hour2 hours; The data is only for your reference but not for use of sales. M: Mechanical speed governor, EECU: Electronic speed governor; NA: Naturally aspirated, TC: Turbocharged, TCA: Turbocharged and air-air aftercooled. TCW: Water-cooled Turbocharged; The weights are approximate and without fuel Generating Set Model Length (L) mm (in) Width (W) mm (in) Height (H) mm (in) Dry kg (lb) WPS WPS00S Dry = With Lube Oil Wet = With Lube Oil and Coolant Wet kg (lb)

8 Engine model: 04C-44TAG2 Cooling system Radiator -face area ,25 m² -rows and materials aluminium -matrix density and material aluminium fins per inch -width of matrix mm -height of matrix mm -pressure cap setting kpa Fan -diameter mm -drive ratio : -number of blades material composite -type pusher Coolant Total system capacity -with radiator ,6 litres -without radiator ,0 litres Maximum top tank temperature C Thermostat operation range C Recommended coolant: 50% ethylene glycol with a corrosion inhibitor (BS 658 :992 or MOD AL39) and 50% clean fresh water. Electrical System -type negative ground -alternator v24v options -starter motor v24v options Cold start recommendations Minimum cranking speed revmin Starter motor specifications Starter motor type 2 volt, 3.0 kw Minimum starting temperature Battery selection Commercial ref. number Exhaust system Minimum battery type for SAE lubricating oil viscosity C 5W 0W 5W 0W -5 X B -5 X B -20 X B -25 Perkins code X B Battery minimum performance BS 39 SAE J A B D E Maximum back 500 revmin kpa Maximum back 800 revmin kpa Exhaust outlet size mm Induction system Maximum air intake restriction -clean filter kpa -dirty filter kpa -air filter type stage cylonicpaper element Fuel system Type of injection direct Fuel injection pump rotary Fuel atomiser multi-hole Nozzle opening pressure ,0 MPa Fuel lift pump -flow litreshour -pressure kpa Maximum suction head kpa Maximum static pressure head kpa Governor type Perkins LCS electronic governor Speed control to iso 8528, G3 Fuel specification USA Fed Off Highway EPA2D Density 5 C) , Viscosity 40 C) ,04.5 Sulphur content % Max. Cetane number Min. Fuel consumption litreshour Power Rating Speed 0% 00% 75% 50% 60 Hz 29,7 26,9 20,2 4, 50 Hz 24,9 22,6 7,,8 Lubrication system Lubricating oil capacity Total system ,0 litres Sump capacity -maximum litres -minimum ,5 litres Maximum engine operating angles -front up, front down, right side or left side Lubricating oil pressure -relief valve opens kpa -at maximum no-load speed kpa Normal oil temperature C Max. continuous oil temperature C Oil consumption at full load as a % of fuel consumption % Recommended SAE viscosity A single or multigrade oil must be used which conforms to API-CCSE or CCMC-D, see illustration below: Mountings Maximum static bending moment at rear face of block Nm

9 Alternator model: LSA44.2VS45 SPECIALLY ADAPTED FOR APPLICATIONS The LSA 44.2 alternator is designed to be suitable for typical generator applications, such as: backup, standard production, cogeneration, marine applications, rental, telecommunications, etc. COMPLIANT WITH INTERNATIONAL STANDARDS The LSA 44.2 alternator conforms to the main international standards and regulations: IEC 60034, NEMA MG.22, ISO 8528, CSAUL on request, marine regulations, etc. It can be integrated into a CE marked generator. The LSA 44.2 is designed, manufactured and marketed in an ISO 900 environment. TOP OF THE RANGE ELECTRICAL PERFORMANCE - Class H insulation. - Standard 2-wire re-connectable winding, 23 pitch, type no Voltage range: 220 V V and 380 V - 45 V (440 V) - 50 Hz 208 V V and 380 V V - 60 Hz. - Other voltages are possible with optional adapted windings: - 50 Hz: 440 V (no. 7), 500 V (no. 9), 600 V (no. 22 or 23), 690 V (no. 0 or 52) - 60 Hz: 380 V and 46 V (no. 8), 600 V (no. 9). - Total harmonic distorsion HDT < 2%. - R 79 interference suppression conforming to standard EN 550 group class B standard for European zone (CE marking). EXCITATION AND REGULATION SYSTEM SUITED TO THE APPLICATION Excitation system Regulation options Voltage regulator SHUNT AREP PMG T.I. Current transformer for paralleling R 726 Mains paralleling R 73 3-phase sensing R phase sensing on mains paralleling unbalanced P Remote voltage potentiometer R 250 Std R Std Std D 50 - optional optional included included NA Voltage regulator accuracy % - : possible adaptation - NA : not possible. PROTECTION SYSTEM SUITED TO THE ENVIRONMENT - The LSA is IP Standard winding protection for clean environments with relative humidity 95 %, including indoor marine environments. Options: Filters on air inlet : derating 5%. Filters on air inlet and air outlet (IP 44) : derating 0%. Winding protections for harsh environments and relative humidity greater than 95%. Space heaters. Thermal protection for windings and shields. REINFORCED MECHANICAL STRUCTURE USING FINITE ELEMENT MODELLING - Compact and rigid assembly to better withstand generator vibrations. - Steel frame. - Twin-bearing and single-bearing versions designed to be suitable for engines on the market. - Half-key balancing. - Greased for life bearings. - Regreasable bearing option available on SHUNT and AREP versions, not available with PMG. ACCESSIBLE TERMINAL BOX PROPORTIONED FOR OPTIONAL EQUIPMENT - Easy access to the voltage regulator and to the connections. - Possible clusion of accessories for paralleling, protection and measurement. - 8 way terminal block for reconnecting voltage reconnection. - D 50 digital AVR adapted to the machine exterior

10 Control System function list WPS00 WPS00S Control System PLC-920 (Optional) PowerLink PLC-920 generator controllers integrating digital, intelligent and network techniques are used as the automatic control systems for diesel generators. It can carry out functions including pre-alarm, warning & electrical trip, fail monitoring and controls etc. FEATURES Parameter configuration via RS-232 serial communication; Log last 50 events & alarm information with measured values; Statistics records; Remote startstop; Speed sensing from alternator voltage or magnetic pickup; Configurable 3 inputs and 6 outputs; ECU powers, ECU stop, STOP or fuel solenoid selection; Automatic transfer switching control and engine control; Adjustable start, load and stop timers. SPECIFICATION Dimensions: mm*8mm*6mm Protection: IP65 at front panel Operating temperature: -20 to 70 Max. Operating current is 360mA Sender measurement: 0 to 300 ohm FUNCTION Pre-Alarm Engine temperature Oil pressure Overunder voltage Overunder frequency Overunder speed Warning & Electrical trip Over current Short circuit Error Overunder speed Speed loss Battery low Battery high Maintenance Over current Short circuit Engine stop Can bus Charge alternator Panel cut-out: 8mm*70mm Weight: approximately 0.3kg DC battery supply voltage: 8 to 32Vdc CT secondary: 5A Accuracy: %FS, resolution: ohm Fail monitoring Emergency stop Multiple engage fail Failed to start Low oil pressure High temperature Speed failure Voltage Charging fail Shutdown Warning Controls Fuel and stop solenoid ECU power and stop Starter motor Automatic generator start Preheat External alarm horn Engine cooling Idle mode General accessory Operator Interface Measurement and Instrumentation Shutdown Protection and Indication Threshold Warning&Indication Paralleling Capability Power Transfer Function Environment Monitoring Function MODEL AVR Electronic Governing Glow plug control Cycle Cranking MODBUS Networking Fault History manual startstop Autoremote start Regular Test Auto operation LED Manual operation LED Common Shutdown LED Common warning LED Fail to start LED Emergency stop(local) Alphanumeric screen Remote start input active LED Alarm reset Oil pressure Water Temperture Engine Speed Engine Engine Altamator Altamator Mains Expression Hours Run Number of Starts Battery Voltage Coolant Temperature 3PhaseL-L Voltage&Frequency 3phase Current Frequency kwh Apparent Power Active Power and Reactive Power Power Factor Per PhasekW, kwr Per Phase kva Phase Voltage Output Power Grid Line Voltage Grid Phase Voltage Grid Frequency Low Fuel Level High Fuel Level Low Oil Pressure High Water Temperature Failure to Stop Failure to Start Controlable start circlestimes Overspeed Under&Over Voltage Under&Over Frequency Overcurrent Earth Leakage Reverse Power Reverse kwr Low Oil Pressure Low Water Temperature High Water Temperature Low Water Level LowHigh Battery Voltage Failure to Charge Overcurrent Overload Genset UnderOver Voltage Genset UnderOver Frequency underover Speed High Engine Temperature Earth Leakage Synchroscope(Independent Bus) Active and Reactive Power Control Synchroscope(Shared Bus) Synchronization Dector Peak Lopping Automatic Transfer Hard Closed Transition Soft Closed Transtion GenMains Breaker GenMains Breaker Status Protection SpeedVoltage Control Power Indication Fuel&solenoid Valve Control Startor Control Preheating Mains Transfer Switch (Standard) Mains Transfer Switch (Emergency) Operating Temperature ( ) Ambient Temperature ( ) Humidity 80% Grid OverUnder Voltage Control Grid OverUnder Frequency Control Remote Start Output(LoadNo-load) Optional Relay Output Remote Telecom Control with All Functions Engine Instrument Monitoring Altemator Output Instrument Monitoring Connection Point with All-around Setting For 6 Users 3 Users Input Connection Point LCD Light Control of Low Light Operation Environment Safe PIN Code RS Interface Language Selection Multi-Language Function PLC-920 PLC-7420 Standard Optional Impossible

11 Control System Digital, intelligent control system allows easier operation. PLC-7420 FEATURES Microprocessor control, with high stability and credibility Monitoring and measuring operational parameters of the mains supply and genset Indicating operation status, fault conditions, all parameters and alarms Multiple protections; multiple parameters display, like pressure, temp. etc. Manual, automatic and remote work mode selectable Real time clock for time and date display, overall runtime display, 250 log entries Overall power output display Integral speedfrequency detecting, telling status of start, rated operation, overspeed etc. Communication with PC via RS485 OR RS232 interface, using MODBUS protocol PLC-7420 is an advanced control module based on micro-processor, containing all necessary functions for protection of the genset and the breaker control. It can monitor the mains supply, breaker control. and automatically start the engine when the mains is abnormal. Accurately measure various operational parameters and display all values and alarms information on the LCD. In addition, the control module can automaticallyshut down the engine and indicate the engine failure.

12 Optional Engine Alternator Generator Set Fuel System Canopy Water Jacket Preheater Oil Preheater Winding Temperature Measuring Instrument Alternator Preheater PMG Anti-damp and anti-corrosion treatment Anti-condensation heater Tools with the machine Low fuel level alarm Automatic fuel feeding system Fuel T-valves Trailer Lubricating System Exhaust System Cooling System Control Panel Voltages Oil with the machine Protection board from hotness Front heat protection Coolant (-30 C) Remote control panel PLC-920 PLC-7420 ATS 45240V V V 22027V 200-5V The following lists are optional by the needs of customers. Engine Model: 04C-44TAG2 Minor Repair 000 hrs optional No. Part Name Part No. Qty Remark Fuel Filter Oil Filter Air Filter BELT SEAL - ROCKER BOX COVER GASKET - CYLINDER HEAD THERMOSTAT FRONT OIL SEAL SEAL - REAR END OIL B66 368C H F F PowerLink reserves the right to make changes in model, technical sepcification, color, configuration and accessories without prior notice. Please contact the salesman before ordering. May.203