UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI
|
|
- Kory Atkinson
- 5 years ago
- Views:
Transcription
1 COURSE STRUCTURE SEMESTER V (Total Unit 7.0) Course Code Theory Unit Course Code Sessional Unit DMM 5001 Automobile Engineering 1.0 DMM 5002 Automobile Engineering 0.5 Lab. DMM 5003 CAD/CAM 1.0 DMM5004 CAD/CAM Lab. 0.5 DMM 5005 I.C. Engines & Gas 1.0 DMM 5006 I.C. Engine Lab. 0.5 Turbines DMM5007 Heat Transfer 1.0 DMM 5008 Heat Transfer Lab. 0.5 DMM 5012 Project
2 SUBJECT - AUTOMOBILE ENGINEERING Course Code: DMM 5001 Module 1 INTRODUCTION: Basic units, major components of engine, mechanism of operation, Four- Stroke and two - Stroke Petrol and diesel engine, their applications, specification of Auto engines, classification of automobile engine. (5) Module 2 CONSTRUCTIONAL DETAILS OF AUTOMOTIVE ENGINE : Introduction, multi-valve overhead cam system, Crank case, Cylinder liner, piston, rings, Connecting rod, crank shaft, Main bearing, Cam shaft, Valves, Valves seats, Valve mechanism, Valve timing gears, balancing, flywheel, Vibration damper, timing order. (6) Module 3 AUTOMOBILE ELECTRICAL & INSTRUMENTATION SYSTEM Charging System, Various Automobile lighting Circuits, Indicator lights & Warning Devices. Electrical Accessories, Analog & Digital Instrumentation of Auatomobile. (6) Module 4 IGNITION SYSTEMS : Requirements, types, components, automotive ignition timing, distribution system, spark plug, electronic ignition system, distributor less ignition system. (5) Module 5 ENGINE PERFORMANCE Performance parameter, power and mechanical efficiency, torque and mean effective pressure, specific output, volumetric efficiency, fuel-air ratio, specific fuel consumption, thermal efficiency, and heat balance. (6) Module 6 MEASUREMENT & TESTING IN ENGINES Measurement of air consumption, measurement of BHP by Rope brake arrangement, measurement of FHP by Morse test & Willian s line. (6) Module 7 HEATING AND AIR CONDITIONING Refrigeration cycle components & their functions of air conditioning systems of an automobile. Heating systems of an automobile. Air conditioning and heating system diagnosis and service. (6) BOOKS : 1. Automotive Engines BY S. Srinivasan 2. Automobile Engineering BY K.M. Gupta 3. Automobile Engineering BY K.K. Ramalingam 4. Internal Combustion Engines BY Shyam K. Agrawal 5. Internal Combustion Engines BY Feruson & Kirkpartrick 2
3 SUBJECT : CAD/CAM Course Code: DMM 5003 Module-1: Basic Concepts: Introduction of Computer Aided Design, The Design Process, Product Cycle, CAD/CAM Developments, Definition of CAD/CAM Tools, Hardware and Software requirement of CAD, Engineering Application of CAD. Module-2: Computer Graphics: Graphic System: CRT, Raster Scan system and Display process, Random Scan System and display, direct view storage tubes. Module-3: Output primitive: Line draw algorith DDA & Bresenhems, cirle generating algorithm Mid point circle Algorithm. Module-4: Geometric Transformations: 2D & 3D Transformations. Translation, Rotation, Scaling, Reflection, Homogeneous co-ordinates, windowing & clipping, View coordinate Reference frame, point & Line clipping algorithm. Module-5: Curve Surface: 2D Conic & 3D Hermite, Bazier & B-spline curves. Bazier & B-Spline surfaces. The various surface representation scheme & techniques. Module-6: Solid Modeling: Geometric modeling: Wire frame, surface & solid modeling. Techniques for volume modeling. Boundary Representation and coustructive Solid Geometry method. Module-7: Introduction to CAM & ROBOTICS: Concept of numerical control machine & CNC machine & NC co-ordinate system. Concept & Introduction of Robotics Text Book: 1. CAD/CAM by Ibrahim Zeid,Tata McGraw Hill Publishing Comp. Ltd., New Delhi Reference Books: 1. Computer Graphics by Hearn & Baker, Publication Prentice Hall. 2. CAD/CAM by Chirs McMohan, Publication: Pearson Education Asia. 3. Computer Aided Design by R.K. Srivastava, Umesh Publication. 4. CAD/CAM by M.P. Groover 3
4 SUBJECT : I.C. ENGINES & GAS TURBINES Course Code: DMM 5005 Module-1 Introduction: Classification of I.C. Engine, fundamental difference between S.I. and C.I. engines, Comparison of two stroke and four stroke engine, Air Standard Cycles: Otto, Diesel, Dual, Joule and Brayton cycles, Fuel-air Cycles and their analysis. Module-2 Fuels and combustion: Different types of fuels and their properties, chemical composition, octane and cetane number, knocking rating, additives, stochiometric reaction. Module-3 Carburation, Injection and supercharging: Introduction, MPFI system. Injection system of C.I. engines, Introduction of supercharging, its purpose. Module-4 Engine Cooling and Lubrication: Introduction, air and water cooling, thermo syphon, pump circulation, properties of lubricating oil, Role of Additives. Module-5 Testing and Performance: Introduction, measurement of air, fuel consumption, indicated power, brake power, Morse test, Heat balance sheet, governing of I.C. engine, performance parameter of S.I. and C.I. engine. Module-6 Gas turbine and Jet Propulsion: Theory of gas turbine, thermodynamic analysis of Brayton cycle, and with regeneration, reheat, intercooling. Compressor and turbines isentropic efficiency. Jet propulsion cycle, elementary idea of turbojet. (9 Lectures) Module-7 Engine Emission: Introduction, engine emissions and their effects, gasoline and diesel emission, methods of measuring pollutants. Text Book: 1. Internal combustion engines by E.F.Obert. 2. Gas turbine Theory by Cohen Roger. Reference Books: 1. A course in Internal Combustion Engines by M.L. Mathur and R.P. Sharma. 2. Gas Turbine Jet and Rocket Propulsion by M.L.Mathur and R.P.Sharma. 4
5 SUBJECT : HEAT TRANSFER Course Code: DMM 5007 Module 1 Introductory concepts, modes of heat transfer conduction, convection and radiation, basic equations and applications, one dimensional heat conduction without heat generation, composite walls, cylinders and spheres, electrical analogs of thermal systems. Module 2 Extended surfaces (Fins) : General equation, temperature distribution, heat flow, fin efficiency, effectiveness. Module 3 Radiation: Definition and laws of thermal radiation, black body, real surfaces, gray surfaces, radiation properties, electrical analogy, radiation shield, gas radiation basics only. Module 4 Convection: Natural and forced convection, concept of viscous and thermal boundary layers, laminar and turbulent flow, continuity equation, momentum equation, energy equation. Module 5 Forced Convection: Dimensional analysis, Nusselt number, force convection for internal flowlaminar. Module 6 Natural convection: Grashoff number, analytical method, integral method, constant heat flux, horizontal flat surfaces, simplified correlation for air, combined free and forced convection. Module 7 Heat Exchanger: Types of heat exchanger, LMTD method of analysis, storage type exchangers, basic ideas of boiling process. Books: 1. Heat and Mass Transfer by F. Kids 2. Heat and Mass Transfer by J.P. Holman 3. Heat and Mass Transfer by C.P. Kothandraman 4. Heat and Mass Transfer by D.S.Kumar 5. A course in Heat Transfer by Arora and Domkundwar 5
UNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI COURSE STRUCTURE. (W.E.F Batch Students) (Total Unit 7.5) Sessional Unit Code
COURSE STRUCTURE (W.E.F. 2011 Batch Students) (Total Unit 7.5) Course Theory Unit Course Sessional Unit Code Code DAE 4001 Thermal Engineering 1.0 DAE 4002 Thermal Engineering Lab. 0.5 DAE 4003 Fluid Mechanics
More informationUNIVERSITY POLYTECHNIC B.I.T., MESRA, RANCHI. COURSE STRUCTURE (W.E.F Batch Students) (Total Unit 7.0) Theory Unit Course Code
COURSE STRUCTURE (W.E.F. 2011 Batch Students) (Total Unit 7.0) Course Code Theory Unit Course Code Sessional Unit DAE 5001 Automobile Engine II 1.0 DAE 5002 Automobile Engine II Lab 0.5 DAE 5003 DAE 5005
More informationMEL345 I.C. ENGINES. Course Instructor : Prof. J.P. Subrahmanyam. II Next to I.C. Engines Laboratory.
MEL345 I.C. ENGINES Course Instructor : Prof. J.P. Subrahmanyam II-154 - Next to I.C. Engines Laboratory jp_sub@yahoo.com jpsm@mech.iitd.ernet.in Course Coordinator : Prof. M.R. Ravi II 257; ravimr@iitd.ac.in
More informationModel Question Papers
QUESTION CARRIES 2 MARKS Model Question Papers 1. Define engine. Give their classification? 6 th Semester I.C. ENGINE [ME-604] UNIT -1 2. Define the performance parameters of IC engine ie indicated power,
More informationFoundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...
Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...
More informationHeat engine. Heat engine
Heat engine Device that transforms heat into work. It requires two energy reservoirs at different temperatures An energy reservoir is a part of the environment so large wrt the system that its temperature
More informationME2301 THERMAL ENGINEERING L T P C OBJECTIVE:
ME2301 THERMAL ENGINEERING L T P C 3 1 0 4 OBJECTIVE: To integrate the concepts, laws and methodologies from the first course in thermo dynamics into analysis of cyclic processes To apply the thermodynamic
More informationAl-Balqa Applied University
تا سست عام 997 Specialization Common Course Number 202073 Course Title Internal Combustion Engines Credit Hours 3 Theoretical Hours 3 Practical Hours 0 صفحة () من (0) تا سست عام 997 Brief Course Description:
More informationSET - 1 II B. Tech II Semester Regular/Supplementary Examinations, April/May-2017 THERMAL ENGINEERING-I (Mechanical Engineering) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts
More informationChapter 9 GAS POWER CYCLES
Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 9 GAS POWER CYCLES Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction
More informationPower Cycles. Ideal Cycles, Internal Combustion
Gas Power Cycles Power Cycles Ideal Cycles, Internal Combustion Otto cycle, spark ignition Diesel cycle, compression ignition Sterling & Ericsson cycles Brayton cycles Jet-propulsion cycle Ideal Cycles,
More informationChapter 9 GAS POWER CYCLES
Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 9 GAS POWER CYCLES Mehmet Kanoglu University of Gaziantep Copyright The McGraw-Hill
More informationDEPARTMENT OF MECHANICAL ENGINEERING. 6 th Semester
jk"vªh; izks ksfxdh lalfkku] fetksje NATIONAL INSTITUTE OF TECHNOLOGY, MIZORAM (An Institute of National Importance under Ministry of HRD, Govt. of India) CHALTLANG, AIZAWL, MIZORAM 796012 Phone/Fax: 0389-2341699
More informationInternal Combustion Engines
Introduction Lecture 1 1 Outline In this lecture we will learn about: Definition of internal combustion Development of the internal combustion engine Different engine classifications We will also draw
More informationSYLLABUS FOR B.TECH. PROGRAMME IN MECHANICAL ENGINEERING INSTITUTE OF TECHNOLOGY ZAKURA CAMPUS UNIVERSITY OF KASHMIR SRINAGAR J&K,
SYLLABUS FOR B.TECH. PROGRAMME IN MECHANICAL ENGINEERING INSTITUTE OF TECHNOLOGY ZAKURA CAMPUS UNIVERSITY OF KASHMIR SRINAGAR J&K, 190006 0 COURSESTRUCTUREFOR B.Tech 8 th SemesterMechanical ATUNIVERSITYOFKASHMIR
More informationL34: Internal Combustion Engine Cycles: Otto, Diesel, and Dual or Gas Power Cycles Introduction to Gas Cycles Definitions
Page L: Internal Combustion Engine Cycles: Otto, Diesel, and Dual or Gas Power Cycles Review of Carnot Power Cycle (gas version) Air-Standard Cycles Internal Combustion (IC) Engines - Otto and Diesel Cycles
More informationScheme - G. Sample Test Paper-I. Course Name : Diploma in Mechanical Engineering Course Code : ME Semester : Fifth Subject Title : Power Engineering
Sample Test Paper-I Marks : 25 Time:1 hour Q1. Attempt any Three 3X3=9 a) Define i) Mean Effective Pressure ii) Piston Speed iii) Swept Volume b) Draw Carnot cycle on P-V and T-S Diagram c) State the need
More informationInternal Combustion Engines
Lecture-19 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Background The power output
More informationAT AUTOMOTIVE ENGINES QUESTION BANK
AT6301 - AUTOMOTIVE ENGINES QUESTION BANK UNIT I: CONSTRUCTION & WORKING PRINCIPLE OF IC ENGINES 1. State the application of CI engines? 2. What is Cubic capacity of an engine? 3. What is the purpose of
More informationGas Power System. By Ertanto Vetra
Gas Power System 1 By Ertanto Vetra Outlines Introduction Internal Combustion Engines Otto Cycles Diesel Cycles Gas Turbine Cycles Gas Turbine Based Combined Cycles Gas Turbines for Aircrafts Turbojets
More informationIntroduction to Aerospace Propulsion
Introduction to Aerospace Propulsion Introduction Newton s 3 rd Law of Motion as the cornerstone of propulsion Different types of aerospace propulsion systems Development of jet engines Newton s Third
More informationUNIT 1 GAS POWER CYCLES
THERMAL ENGINEERING UNIT 1 GAS POWER CYCLES Air Standard Cycles - Otto, Diesel, Dual, Brayton cycle with intercooling, reheating and regeneration- Calculation of airstandard efficiency and mean effective
More informationPrinciples of Engine Operation. Information
Internal Combustion Engines MAK 4070E Principles of Engine Operation Prof.Dr. Cem Soruşbay Istanbul Technical University Information Prof.Dr. Cem Soruşbay İ.T.Ü. Makina Fakültesi Motorlar ve Taşıtlar Laboratuvarı
More informationIdealizations Help Manage Analysis of Complex Processes
8 CHAPTER Gas Power Cycles 8-1 Idealizations Help Manage Analysis of Complex Processes The analysis of many complex processes can be reduced to a manageable level by utilizing some idealizations (fig.
More informationLECTURE NOTES INTERNAL COMBUSTION ENGINES SI AN INTEGRATED EVALUATION
LECTURE NOTES on INTERNAL COMBUSTION ENGINES SI AN INTEGRATED EVALUATION Integrated Master Course on Mechanical Engineering Mechanical Engineering Department November 2015 Approach SI _ indirect injection
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More information(a) then mean effective pressure and the indicated power for each end ; (b) the total indicated power : [16]
Code No: R05220304 Set No. 1 II B.Tech II Semester Regular Examinations, Apr/May 2007 THERMAL ENGINEERING-I ( Common to Mechanical Engineering and Automobile Engineering) Time: 3 hours Max Marks: 80 Answer
More informationME2302 DYNAMICS OF MACHINERY UNIT I FORCE ANALYSIS AND FLYWHEELS 12
ME2302 DYNAMICS OF MACHINERY L T P C 3 1 0 4 UNIT I FORCE ANALYSIS AND FLYWHEELS 12 Static force analysis of mechanisms D Alemberts principle - Inertia force and Inertia torque Dynamic force analysis -
More informationADVANCED TRAINING INSTITUTE, HYDERABAD PR04/F01
Revision: 01 LEARNING CONTENT Page 1 of 9 III COURSE CODE HE-01 COURSE TITLE BASIC AND MAINTAINENCE OF PETROL AND DIESEL ENGINE OBJECTES On completion of the course, the learner will be able to identify
More informationMEB THERMAL ENGINEERING - I QUESTION BANK UNIT-I PART-A
MEB 420 - THERMAL ENGINEERING - I QUESTION BANK UNIT-I Each question carries 1 mark. PART-A 1. Define temperature. 2. Define intensive property 3. Explain the term absolute zero of temperature 4. State
More information4. With a neat sketch explain in detail about the different types of fuel injection system used in SI engines. (May 2016)
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2000 Certified Institution Dr. E.M.Abdullah
More informationClass Notes on Thermal Energy Conversion System
Class Notes on Thermal Energy Conversion System For the students of Civil & Rural 3 rd semester Ramesh Khanal Assistant Professorr Nepal Engineering College Bhaktapur, Nepal 2015 Course Structure MEC 209.3:
More informationInternal Combustion Engines
Lecture-31 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Introduction Known as Hot air
More informationIntroduction Engine Systems. Chris Onder, Raffael Hedinger, Norbert Zsiga, Michael Zihlmann
Introduction Engine Systems Chris Onder, Raffael Hedinger, Norbert Zsiga, Michael Zihlmann 1 Introduction Engine Systems 1. Concept of a combustion engine 2. Different types of engines 3. Topics of the
More informationAutomotive & Diesel Technology
AUTO 133 Automotive Suspension/Steering (3.5 credit, 2 lecture, 3 lab) Instruction in skills needed to diagnose, service, and repair modern automotive suspension/steering systems. Suspension/steering designs,
More informationIntroduction to I.C Engines CH. 1. Prepared by: Dr. Assim Adaraje
Introduction to I.C Engines CH. 1 Prepared by: Dr. Assim Adaraje 1 An internal combustion engine (ICE) is a heat engine where the combustion of a fuel occurs with an oxidizer (usually air) in a combustion
More informationJET AIRCRAFT PROPULSION
1 JET AIRCRAFT PROPULSION a NPTEL-II Video Course for Aerospace Engineering Students Bhaskar Roy and A M Pradeep Aerospace Engineering Department I.I.T., Bombay 2 Brief outline of the syllabus Introduction
More informationINTERNAL COMBUSTION ENGINE (SKMM 4413)
INTERNAL COMBUSTION ENGINE (SKMM 4413) Dr. Mohd Farid bin Muhamad Said Room : Block P21, Level 1, Automotive Development Centre (ADC) Tel : 07-5535449 Email: mfarid@fkm.utm.my HISTORY OF ICE History of
More informationVALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE
VALVE TIMING DIAGRAM FOR SI ENGINE VALVE TIMING DIAGRAM FOR CI ENGINE Page 1 of 13 EFFECT OF VALVE TIMING DIAGRAM ON VOLUMETRIC EFFICIENCY: Qu. 1:Why Inlet valve is closed after the Bottom Dead Centre
More informationInternal Combustion Engines
Internal Combustion Engines The internal combustion engine is an engine in which the burning of a fuel occurs in a confined space called a combustion chamber. This exothermic reaction of a fuel with an
More informationGas Power Cycles. Tarawneh
Gas Power Cycles Dr.Mohammad Tarawneh ) Carnot cycle 2) Otto cycle ) Diesel cycle - Today 4) Dual Cycle 5) Stirling cycle 6) Ericsson cycles 7) Brayton cycle Carnot Cycle Reversible isothermal expansion
More informationHours / 100 Marks Seat No.
17529 14115 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationINTRODUCTION OF FOUR STROKE ENGINE
INTRODUCTION OF FOUR STROKE ENGINE Engine: An engine is motor which converts chemical energy into mechanical energy Fuel/petrol engine: A petrol engine (known as a gasoline engine in North America) is
More informationCOURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine
COURSE NUMBER & COURSE TITLE: ME 300 Fundamentals of Internal Combustion Engine INSTRUCTOR: Xingcai Lu, Xinqi Credits: 3 Qiao REQUIRED COURSE OR ELECTIVE COURSE: Required COURSE STRUCTURE/SCHEDULE: 1.
More informationUNIT IV INTERNAL COMBUSTION ENGINES
UNIT IV INTERNAL COMBUSTION ENGINES Objectives After the completion of this chapter, Students 1. To know the different parts of IC engines and their functions. 2. To understand the working principle of
More informationContent : 4.1 Brayton cycle-p.v. diagram and thermal efficiency. 4Marks Classification of gas turbines.
Content : 4.1 Brayton cycle-p.v. diagram and thermal efficiency. 4Marks Classification of gas turbines. 4.2 Construction and working of gas turbines i) Open cycle ii) Closed cycle gas Turbines, P.V. and
More informationCrankcase scavenging.
Software for engine simulation and optimization www.diesel-rk.bmstu.ru The full cycle thermodynamic engine simulation software DIESEL-RK is designed for simulating and optimizing working processes of two-
More information2. Discuss the effects of the following operating variables on detonation
Code No: RR220303 Set No. 1 II B.Tech II Semester Regular Examinations, Apr/May 2006 THERMAL ENGINEERING-I ( Common to Mechanical Engineering and Automobile Engineering) Time: 3 hours Max Marks: 80 Answer
More informationAUTO MECHANICS. PAPER 1: will consist of forty multiple-choice objective questions all of which are to be answered in 1 hour for 40 marks.
SCHEME OF EXAMINATION AUTO MECHANICS There will be three papers, Papers1, 2 and 3 all of which must be taken. Papers 1 and 2 shall be a composite paper to be taken at one sitting. PAPER 1: will consist
More informationEffect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy
ISSN 2395-1621 Effect of Preheating Air in Petrol Engine by Using Exhaust Gas Heat Energy #1 Ghorpade Sangram D., #2 Lokhande Akshay R., #3 Lagad Pradeep B. #4 Jangam Raviraj S. 1 sangramghorpade1996@gmail.com
More informationAssignment-1 Introduction
Assignment-1 Introduction 1. Compare S.I. engines with C.I engines. 2. Explain with the help of neat sketch, the working of a 2-stroke petrol engine. 3. Derive an equation of efficiency, work output and
More informationApplied Thermodynamics Internal Combustion Engines
Applied Thermodynamics Internal Combustion Engines Assoc. Prof. Dr. Mazlan Abdul Wahid Faculty of Mechanical Engineering Universiti Teknologi Malaysia www.fkm.utm.my/~mazlan 1 Coverage Introduction Operation
More informationFriday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
More informationInternal Combustion Engines
Lecture-21 Prepared under QIP-CD Cell Project Internal Combustion Engines Ujjwal K Saha, Ph.D. Department of Mechanical Engineering Indian Institute of Technology Guwahati 1 Poppet valves The poppet valve
More informationINTERNAL COMBUSTION ENGINES
Second Edition Fundamentals of INTERNAL COMBUSTION ENGINES Solenoid winding Electrical connection Pintle Valve needle Return spring H.N. Gupta FUNDAMENTALS OF INTERNAL COMBUSTION ENGINES SECOND EDITION
More informationWhich are the four important control loops of an spark ignition (SI) engine?
151-0567-00 Engine Systems (HS 2017) Exercise 1 Topic: Lecture 1 Johannes Ritzmann (jritzman@ethz.ch), Raffi Hedinger (hraffael@ethz.ch); October 13, 2017 Problem 1 (Control Systems) Why do we use control
More information7. ME- 357 Internal Combustion Engine Lab ME- 358 Seminar
Year: B.Tech. III Year SEMESTER: V S No. Course No. INSTITUTE OF TECHNOLOGY GURU GHASIDAS VISHWAVIDHALAYA (A CENTRAL UNIVERSITY ESTABLISHED BY THE CENTRAL UNIVERSITY ORDINANCE 2009, NO: 3 OF 2009) DEPARTMENT
More informationIC ENGINES. Differences between SI and CI engines: Petrol is fuel, which has a high self ignition temperature
IC ENGINES SI Engines work at constant volume. They have a compression ratio of around 6-10. But CI engines work at constant pressure and has a compression ratio of 16-20. In four stroke engines, one power
More informationSILVER OAK COLLEGE OF ENGINEERING & TECHNOLOGY MECHANICAL ENGINEERING DEPARTMENT MID SEMESTER-1 EXAMINATION SYLLABUS
MID SEMESTER- EXAMINATION SYLLABUS NAME OF SUBJECT: OPERATION RESEARCH SUBJECT CODE: 790 PERCENTAGE OF MID SEM EXAM SYLLABUS: 6 % Chapter No. 7 Topic Name Operations Research: Origin of Operation Research,
More informationDevelopment of a two-dimensional internal combustion engines model using CFD for education purpose
20th International Congress on Modelling and Simulation, Adelaide, Australia, 1 6 December 2013 www.mssanz.org.au/modsim2013 Development of a two-dimensional internal combustion engines model using CFD
More information(v) Cylinder volume It is the volume of a gas inside the cylinder when the piston is at Bottom Dead Centre (B.D.C) and is denoted by V.
UNIT II GAS POWER CYCLES AIR STANDARD CYCLES Air standard cycles are used for comparison of thermal efficiencies of I.C engines. Engines working with air standard cycles are known as air standard engines.
More informationCombustion engines. Combustion
Combustion engines Chemical energy in fuel converted to thermal energy by combustion or oxidation Heat engine converts chemical energy into mechanical energy Thermal energy raises temperature and pressure
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. AUTOMOBILE ELECTRICAL SYSTEM (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum AUTOMOBILE ELECTRICAL SYSTEM (Code: 3330203) Diploma Programme in which this course is offered Semester in which offered 3 rd Semester
More informationIntroduction. Internal Combustion Engines
Introduction Internal Combustion Engines Internal Combustion Engines A heat engine that converts chemical energy in a fuel into mechanical energy. Chemical energy first converted into thermal energy (Combustion)
More informationCO3 CO8 CO9 CO1 CO3 CO5
CO9 AUTOMOBILE ENGINEERING 15 AU32 - MATEIAL SCIENCE AND METALLURGY Explain different types of material crystal structures and arrangement of atoms. Describe various mechanical properties of materials.
More informationBASIC CIVIL & MECHANICAL ENGINEERING
SHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2000 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI 621 105 DEPARTMENT OF MECHANICAL ENGINEERING FS81504 BASIC CIVIL & MECHANICAL
More informationEngine Auxiliary Systems-Spanish
Engine Auxiliary Systems-Spanish 1. COMBUSTION ENGINES IN 1.1. INTRODUCTION 1.2. COMBUSTION 1.2.1. IDEAL COMBUSTION 1.2.2. FIRING TRIGGER 1.2.3. Precombustion OR 1.3. FACTORS AFFECTING ON THE COMBUSTION
More informationUnit WorkBook 4 Level 4 ENG U13 Fundamentals of Thermodynamics and Heat Engines UniCourse Ltd. All Rights Reserved. Sample
Pearson BTEC Levels 4 Higher Nationals in Engineering (RQF) Unit 13: Fundamentals of Thermodynamics and Heat Engines Unit Workbook 4 in a series of 4 for this unit Learning Outcome 4 Internal Combustion
More informationDEPARTMENT OF MECHANICAL ENGINEERING ME ENGINEERING THERMODYNAMICS TWO MARKS QUESTION AND ANSWER
DEPARTMENT OF MECHANICAL ENGINEERING ME 6301- ENGINEERING THERMODYNAMICS TWO MARKS QUESTION AND ANSWER 1. Define the term thermal engineering. Ans: Thermal engineering is the science that deals with the
More informationAerospace Propulsion Systems
Brochure More information from http://www.researchandmarkets.com/reports/1288672/ Aerospace Propulsion Systems Description: Aerospace Propulsion Systems is a unique book focusing on each type of propulsion
More informationREVIEW STUDY ON EXHAUST OF A DIESEL ENGINE THERMAL STORAGE
REVIEW STUDY ON EXHAUST OF A DIESEL ENGINE THERMAL STORAGE Prateek Jain 1, Sushil Yadav 2, Durgesh Singh 3 1,2 B.Tech. Scholar, 3 Assistant Professor, Vedant College of Engineering and Technology, Bundi,
More informationWarsaw University of Technology
Warsaw University of Technology Faculty of Automotive and Construction Machinery Engineering INSTITUTE OF VEHEECLES Laboratory of Combustion Engines Theory Lab work 4 INDICATOR DIAGRAM developed: mgr inż.
More informationWeek 10. Gas Power Cycles. ME 300 Thermodynamics II 1
Week 10 Gas Power Cycles ME 300 Thermodynamics II 1 Today s Outline Gas power cycles Internal combustion engines Four-stroke cycle Thermodynamic cycles Ideal cycle ME 300 Thermodynamics II 2 Gas Power
More informationAssignment-1 Air Standard Cycles
Assignment-1 Air Standard Cycles 1. What do u mean by air standard cycle? List assumptions for air standard cycle & give reasons why air standard cycle differs from actual cycle. 2. Derive an equation
More informationGovernment of Karnataka Department of Technical Education Board of Technical Examinations, Bangalore
CIE- 25 Marks Government of Karnataka Department of Technical Education Board of Technical Examinations, Bangalore Prerequisites: Knowledge of basic mathematics and Applied Science Course Objectives: 1.
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING. Question Bank. UNIT-I THERMODYNAMIC CYCLES Part-A (2 Marks)
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING Question Bank Sub. Code/Name: ME1351 - THERMAL ENGINEERING Year/Sem: III/VI 1. What is a thermodynamic cycle? UNIT-I THERMODYNAMIC CYCLES
More informationREDESIGNED MODULES FOR THE SECTOR AUTOMOBILE UNDER MODULAR EMPLOYABLE SKILLS (MES)
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOBILE UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of Labour & Employment
More informationUnit IV. Marine Diesel Engine Read this article about the engines used in the marine industry
Universidad Nacional Experimental Marítima del Caribe Vicerrectorado Académico Cátedra de Idiomas English VI. Maritime Engineering Marine facilities Unit IV. Marine Diesel Engine Read this article about
More informationThermal Stress Analysis of Diesel Engine Piston
International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies 576 Thermal Stress Analysis of Diesel Engine Piston B.R. Ramesh and Kishan
More informationWhite Paper Waulis Motors Ltd. Tapio Pohjalainen
White Paper 00114 Tapio Pohjalainen +358 40 864 9224 tapio.pohjalainen@waulis.com Abstract Trends in automotive industry for engine performance both in regulatory requirements and customer expectations
More informationThermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section
Thermal Analysis of Shell and Tube Heat Exchanger Using Different Fin Cross Section J. Heeraman M.Tech -Thermal Engineering Department of Mechanical Engineering Ellenki College of Engineering & Technology
More informationSIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) QUESTION BANK UNIT I I.C ENGINES
SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR UNIT I I.C ENGINES 1 (a) Explain any six types of classification of Internal Combustion engines. (6M) (b) With a neat sketch explain any three
More informationThermodynamics cycles can be classified into different categories depending on fluid used or the different processes:
Classification of thermodynamics cycles Thermodynamics cycles can be classified into different categories depending on fluid used or the different processes: Gas and vapor cycles - Gas cycle: the working
More informationHEAT TRANSFER ENHANCEMENT BY V-NOZZLE TURBULATORS
HEAT TRANSFER ENHANCEMENT BY V-NOZZLE TURBULATORS Deepali S. Bankar Lecturer, Automobile Engineering Department G. H. Raisoni Polytechnic Nagpur (Maharashtra), India bankardeepali@gmail.com Abstract The
More informationCONTENTS Duct Jet Propulsion / Rocket Propulsion / Applications of Rocket Propulsion / 15 References / 25
CONTENTS PREFACE xi 1 Classification 1.1. Duct Jet Propulsion / 2 1.2. Rocket Propulsion / 4 1.3. Applications of Rocket Propulsion / 15 References / 25 2 Definitions and Fundamentals 2.1. Definition /
More informationEngine Heat Transfer. Engine Heat Transfer
Engine Heat Transfer 1. Impact of heat transfer on engine operation 2. Heat transfer environment 3. Energy flow in an engine 4. Engine heat transfer Fundamentals Spark-ignition engine heat transfer Diesel
More informationDiploma in Automobile Engineering & Mgt onwards CCII Page 1 of 12
Total Marks Diploma in Automobile Engineering & Mgt. 2014-15 onwards CCII Page 1 of 12 BARATHIYAR UNIVERSITY : COIMBATORE 46 CENTRE FOR COLLABORATION OF INDUSTRY AND INSTITUTION(CCII) Diploma in Automobile
More informationKeywords: Von Mises, Piston, Thermal Analysis, Pressure, CATIAV5R20, ANSYS14 I. INTRODUCTION
Finite Element Analysis of IC Engine Piston Using Thermo Mechanical Approach 1 S.Sathishkumar, Dr.M.Kannan and 3 V.Raguraman, 1 PG Scholar, Professor, 3 Assistant professor, 1,,3 Department of Mechanical
More informationLoad Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
More informationGASOLINE DIRECT INJECTION IN SI ENGINES B. PAVAN VISWANADH P. ASHOK KUMAR. Mobile No : Mobile No:
GASOLINE DIRECT INJECTION IN SI ENGINES SUBMIT TED BY B. PAVAN VISWANADH P. ASHOK KUMAR Y06ME011, III/IV B. Tech Y06ME003, III/IV B. Tech Pavan.visu@gmail.com ashok.me003@gmail.com Mobile No :9291323516
More informationTemplate for the Storyboard stage
Template for the Storyboard stage Animation can be done in JAVA 2-D. Mention what will be your animation medium: 2D or 3D Mention the software to be used for animation development: JAVA, Flash, Blender,
More informationInternal Combustion Engines
Internal Combustion Engines Reading Problems 8-3 8-7 8-35, 8-45, 8-52 Definitions 1. spark ignition: a mixture of fuel and air is ignited by a spark plug applications requiring power to about 225 kw (300
More informationExperimental and CFD Analysis of Exhaust Manifold to Improve Performance of IC Engine
International Research Journal of Engineering and Technology (IRJET e-issn: 2395-56 Experimental and CFD Analysis of Exhaust Manifold to Improve Performance of IC Engine Mr. SACHIN G. CHAUDHARI 1, Mr.
More informationInternal Combustion Engine. Prepared by- Md Ferdous Alam Lecturer, MEE, SUST
Internal Combustion Engine Prepared by- Md Ferdous Alam Lecturer, MEE, SUST What is an Engine? -a machine designed to convert one form of energy into mechanical energy Two types of engines : 1. Internal
More information2.61 Internal Combustion Engine Final Examination. Open book. Note that Problems 1 &2 carry 20 points each; Problems 3 &4 carry 10 points each.
2.61 Internal Combustion Engine Final Examination Open book. Note that Problems 1 &2 carry 20 points each; Problems 3 &4 carry 10 points each. Problem 1 (20 points) Ethanol has been introduced as the bio-fuel
More informationInternal Combustion Engines TUTORIAL
Internal Combustion Engines TUTORIAL College of Engineering Mechanical Engineering Department Academic Year 2012-2013 Class 3 rd Year Class Subject Lecturer Internal Combustion Engines Dr. Raoof M. Radhi
More informationSimple Finite Heat Release Model (SI Engine)
Simple Finite Heat Release Model (SI Engine) Introduction In the following, a finite burn duration is taken into account, in which combustion occurs at θ soc (Start Of Combustion), and continues until
More informationThermo-Kinetic Model to Predict Start of Combustion in Homogeneous Charge Compression Ignition Engine
Thermo-Kinetic Model to Predict Start of Combustion in Homogeneous Charge Compression Ignition Engine Harshit Gupta and J. M. Malliarjuna Abstract Now-a-days homogeneous charge compression ignition combustion
More informationENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment
ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS Program PRO1 Refining processes PRO2 Present and Future fuels Materials PRO3 Fuels - logistics PRO4 Gas, industrial combustion and environment PRO5 Lubrication
More information2013 THERMAL ENGINEERING-I
SET - 1 II B. Tech II Semester, Regular Examinations, April/May 2013 THERMAL ENGINEERING-I (Com. to ME, AME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~
More information