Automotive, Commercial & Industrial. Product Guide

Size: px
Start display at page:

Download "Automotive, Commercial & Industrial. Product Guide"

Transcription

1 NEW! Agricultural Products Guide Automotive, Commercial & Industrial Product Guide 2018 ENGINE OILS AUTOMOTIVE GEAR OILS TRANSMISSION/POWER FLUIDS GREASES HYDRAULIC FLUIDS INDUSTRIAL GAS ENGINE OILS FUNCTIONAL PRODUCTS COMPRESSOR LUBRICANTS FC1 2 LUBRICANTS

2 IFC2

3 2018 Edition This Mystik Lubricants product guide is your directory to Mystik fluids, greases and their applications. Products are not available at all source points. Please check product availability and container sizes for your normal source point(s). Technical information and assistance: Product Answer Line Pre-shipment inquiries: Order Management , option 1 ordermanagement@citgo.com Pricing, availability, post-shipment inquiries: Customer Service , option 2 lubescs@citgo.com Properties shown are based on typical values for the product only and do not constitute a specification. The information contained herein is subject to change without notice. The information in this book is provided with no representations or warranties but with good faith on the basis of the most accurate information available; CITGO accepts no liability for content errors or omissions, or for damages as a result of relying on information contained within. Consult your owner s manual for proper lubricant selection. Mystik lubricants are prohibited from being repackaged. The reprinting of Mystik labels and other material is also prohibited CITGO Petroleum Corporation. All rights reserved. Please visit for the most up-to-date information on products or for Safety Data Sheets. i

4 ENGINE OILS Mystik JT-8 Premium Gasoline Motor Oils... 1 Mystik JT-8 Premium Gasoline Synthetic Motor Oils Mystik JT-8 Synthetic Engine Oil 5W Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils Monogrades Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils SAE 10W-40 and SAE 15W SMALL ENGINE OILS Mystik JT-4 2-Cycle Lawn and Garden Engine Oil Mystik JT-4 2-Cycle Premium Outboard Engine Oil Mystik JT-4 2-Cycle Premium Plus Outboard Engine Oil Mystik JT-4 All-In-One Outboard Engine Oil Mystik JT-4 Sea & Snow 2-Cycle Engine Oil Mystik JT-4 Synthetic 2-Cycle Personal Watercraft Engine Oil Mystik JT-4 Synthetic 2-Cycle Snowmobile Engine Oil.. 16 Mystik JT-4 4-Cycle Marine Engine Oils Mystik JT-4 Synthetic 4-Cycle Snowmobile Motor Oil SAE 0W Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils Mystik JT-4 Premium High Performance Lower Unit Gear Lubricant AUTOMOTIVE GEAR OILS Mystik JT-7 Extended Range Full Synthetic Gear Lubricant SAE 75W Mystik JT-7 Multi-Purpose Gear Lubricants Mystik JT-7 Synthetic Blend SAE 75W-90 Gear Lubricant Mystik SX-7000 Synthetic Fluids Mystik Universal Gear Lubricants TRANSMISSION/POWER FLUIDS Mystik JT-5 Synthetic Blend TFX *NEW* Mystik JT-5 Tractor Trans-Hydraulic Fluid Mystik Multi-Purpose ATF Mystik Synthetic Blend Multi-Vehicle ATF Mystik Lubricants Tenax Fluids Mystik Twin Disc Fluid GREASES Mystik Centra-Lube Grease Mystik General Purpose Grease Mystik JT-6 High Performance Marine Grease Mystik JT-6 Hi-Temp Greases TABLE OF CONTENTS ii Mystik JT-6 Hi-Temp Grease with Moly Mystik JT-6 Synthetic Hi-Temp Greases Mystik JT-6 Lo-Temp Extreme Grease Mystik JT-6 Multi-Purpose Grease Mystik JT-6 Super Heavy Duty 460 Grease Mystik JT-6 Synthetic Blend Grease Mystik Moly Grease Mystik OG-5 Outside Gear Grease Mystik Red Lithium C HYDRAULIC FLUIDS Mystik Anti-Leak Industrial Oil Mystik AW Hydraulic Oils Mystik AW/AL Hydraulic Oils Mystik Hydraulic Jack Oil INDUSTRIAL GAS ENGINE OILS Mystik Terra 340 Gas Engine Oils Mystik Terra 500 Gas Engine Oil SAE 15W Mystik Terra Free Ashless Gas Engine Oils Mystik TerraSyn TM Irrigation Engine Oil FUNCTIONAL PRODUCTS Mystik Bar and Chain Lubricant Mystik Rock Drill Oil Mystik Tuff-Torq EG Mystik Turbine Drip Oil Mystik ViscidLube Oil Treatment Mystik Non-Detergent General Purpose Oils COMPRESSOR LUBRICANTS Mystik Ammonia Compressor Oil AGRICULTURAL PRODUCTS Mystik JT-8 Premium Gasoline Motor Oils Mystik JT-8 Premium Gasoline Synthetic Motor Oils Mystik JT-8 Synthetic Engine Oil 5W Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils Monogrades Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils SAE 10W-40 and SAE 15W Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils Mystik JT-4 2-Cycle Lawn and Garden Engine Oil Mystik JT-7 Multi-Purpose Gear Lubricants Mystik Universal Gear Lubricant Mystik JT-5 Synthetic Blend TFX *NEW* Mystik JT-5 Tractor Trans-Hydraulic Fluid Mystik Multi-Purpose ATF... 90

5 TABLE OF CONTENTS (Cont d.) Mystik JT-6 Hi-Temp Greases Mystik JT-6 Multi-Purpse Grease Mystik JT-6 Super Heavy Duty 460 Grease Mystik AW/AL Hydraulic Oils Mystik AW Hydraulic Oils Mystik Hydraulic Jack Oil Mystik TerraSyn Irrigation Engine Oil Mystik Bar and Chain Lubricant Mystik Turbine Drip Oil Mystik Non-Detergent General Purpose Oils Mystik Lubricants Tenax Fluids REFERENCE INFORMATION SAE J300 & SAE J306 Viscosity Grades Comparative Viscosity Classifications Mystik Grease Characteristics Chart NLGI Grease Classifications ASTM D4950 Standard Classification and Specifications for Automotive Service Greases Grease Thickener Compatibility Chart Approximate Equivalence of Viscosity Grading Systems PRODUCT INDEX iii

6 Engine Oils MYSTIK JT-8 PREMIUM GASOLINE MOTOR OILS Date 06/18 FEATURES: Mystik JT-8 Premium Gasoline Motor Oils, with their advanced, fuel efficient synthetic blends formula, exceed the latest warranty requirements of car manufacturers for gasoline engines and meet the latest API Performance and Resource Conserving ratings. The premium quality detergent/ dispersant formulation guards against sludge, reduces deposits and protects against rust, corrosion and wear. Mystik JT-8 Premium Gasoline Motor Oils provide optimum viscosity and thermal stability and are highly recommended for all carburetor-equipped or fuel-injected gasoline engines including turbocharged, supercharged and other high performance models. These products offer maximum protection against deposits and have superior durability. Even under severe service conditions you can have complete confidence that your engine oil is providing the fullest protection possible. The 5W-20, 5W30 and 10W-30 viscosity grades are recommended for applications calling for oils meeting ILSAC GF-5 and API SN Plus. All viscosity grades are licensed for API SN Plus and are backward compatible with prior service categories (SM, SL, SJ and SH). Special friction modifier provides increased fuel economy Multi-viscosity, thermally stable and durable formulation provides maximum year-round protection Consult owner s manual for fluid selection. MYSTIK JT-8 PREMIUM GASOLINE MOTOR OILS Material Code SAE Grade 5W-20 5W-30 10W-30 Gravity, ASTM D4052, API Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosities: at -25 C, cp Max 5,820 at -30 C, cp Max 6,170 5,360 at 40 C, cst at 100 C, cst Viscosity Index Flash Point, ASTM D92, COC, F ( C) 442 (228) 450 (232) 451 (233) Pour Point, ASTM D97, F ( C) -33 (-36) -38 (-39) -33 (-36) Color, ASTM D1500 L3.5 L3.5 L3.5 Mystik and JT-8 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

7 MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS Date 06/18 Engine Oils Mystik JT-8 Premium Gasoline Synthetic Motor Oils are well-balanced combinations of today s highest quality synthetic base stocks and contain an advanced additive system that meets stringent automotive specifications. They are designed to provide excellent protection in today s high performance gasoline (including turbocharged and supercharged) engines in passenger cars, vans, sport utility vehicles, and light trucks. These synthetic engine oils demonstrate improved performance in today s advanced engine designs, and are available in SAE 0W-20, 5W-20 and 5W-30 viscosity grades. Excellent low-temperature starting and pumpability characteristics High-temperature/high-shear properties well above conventional oils Lower volatility when compared to conventional oils Meets the most advanced emissions and fuel economy standards in the US gasoline engines Enhanced protection against varnish buildup and sludge formation in critical engine parts for top performance and long engine life Extended engine life due to control of wear and deposit formation Compatible with conventional and synthetic motor oils Mystik JT-8 Premium Gasoline Synthetic SAE 0W-20 Approved GM dexos1 Gen2 License D10392HG121 Mystik JT-8 Premium Gasoline Synthetic SAE 5W-20 Approved GM dexos1 Gen2 License D10744HL121 Mystik JT-8 Premium Gasoline Synthetic SAE 5W-30 Approved GM dexos1 Gen2 License D10372HF121 FEATURES: Mystik JT-8 Premium Gasoline Synthetic Motor Oils are recommended for passenger cars, sport utility vehicles and light trucks operating on gasoline. They are also recommended for use in gasoline engines which have been converted to operate on compressed natural gas (CNG), liquified natural gas (LNG), and liquified petroleum gas (LPG-which includes propane and butane). Consult the vehicle owners manual for proper engine lubricant selection. Mystik JT-8 Premium Gasoline Synthetic Motor Oils meet the performance requirements for the latest gasoline-fueled engine service ILSAC GF-5/Resource Conserving and API SN Plus and display the API Certification Mark and API Service Symbol. They have also demonstrated benefits in industry accepted fuel economy tests. Mystik JT-8 Premium Gasoline Synthetic 0W-20 Motor Oil meets the GM dexos1 Gen2 specification and is recommended for Original Equipment Manufacturers (OEM) such as Toyota and Honda for some hybrid vehicle applications and a limited number of low temperature applications. Mystik JT-8 Premium Gasoline Synthetic Motor Oil SAE 5W-30 meets the GM dexos1 Gen2 specification and provides excellent performance where GM4718M or GM6094M is referenced. Note: Mystik JT-8 Premium Gasoline Synthetic Motor Oils are not recommended for use in diesel engines in passenger cars, vans or light trucks. Mystik JT-8 SHD Motor Oils are recommended for diesel applications. (Continued) M

8 Engine Oils MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS Date (Continued) 06/18 - (Continued) MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS Material Code SAE Grade 0W-20 5W-20 5W-30 Gravity, ASTM D4052, API Pounds Per Gallon Flash Point, ASTM D92, F ( C), COC 220 (428) 442 (228) 450 (232) Low Temperature Cranking, ASTM D5293 Temperature, F ( C) -28 (-35) -22 (-30) -22 (-30) Viscosity, cp 5,190 5,270 4,080 Viscosity, ASTM D445, cst at 140 C Viscosity, ASTM D 445, cst at 100 C Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -33 (-36) -33 (-36) -27 (-33) Color, ASTM D1500 L3.5 L3.5 L3.5 ILSAC GF-5 Yes Yes Yes API SN Plus Yes Yes Yes Resource Conserving Yes Yes Yes GM dexos1 Gen2 Approved Yes Yes Yes Mystik and JT-8 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

9 MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 Date 06/18 Engine Oils Mystik JT-8 Synthetic Engine Oil, SAE 5W-40, full synthetic super heavy duty engine oil, engineered with proprietary additive technology, delivers an extra level of performance for both older and newer engines. The careful balance of synthetic components gives improved fuel economy, improved cold temperature performance and improved engine drain interval optimization capabilities. Mystik JT-8 Synthetic Engine Oil, SAE 5W-40 meets the API CK-4 requirements, which is an excellent choice for equipment owners who need maximum engine durability, fuel efficiency, extended oil service capability and superior cold weather start-up performance. FEATURES: Up to 3% fuel economy advantage over SAE 15W-40 viscosity grade oils Improves cold cranking, extending starter/battery life and reducing dependency on block heaters, saving energy Double the oil durability protection compared to conventional CJ-4 engine oils. Always follow OEM recommendations when extending oil drain intervals Superior lubrication in extreme temperature ranges compared to conventional SAE 15W-40 viscosity grade oils. RECOMMENDED FOR: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4 Caterpillar ECF-3 Cummins CES Detroit Diesel DFS 93K 222 Volvo/Mack/Renault VDS-4.5/EOS-4.5/RLD-4 Paccar Navistar Category Mystick JT-8 Synthtic Blend SHD 15W-40 API CJ-4 Mystick JT-8 10W-30 API CK-4 Mystick JT-8 15W-40 API CK-4 Mystick JT-8 5W-40 API CK-4 Back Serviceable Yes Yes Yes Yes Oxidation Stability Shear Stability Aeration Control Wear Control Fuel Efficiency Low Tempurature Start-up Compatible with API CJ-4 Oil Yes Yes Yes Yes (Continued) (Continued) M

10 Engine Oils MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 Date (Continued) 06/18 - (Continued) MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 Material Code SAE Grade 5W-40 Gravity, ASTM D4052, API 34.0 Pounds Per Gallon 7.14 Flash Point, COC, ASTM D92, F ( C) 450 (232) Viscosity, ASTM D445, cst at 40 C 87 cst at 100 C 14 Viscosity Index, ASTM D CCS Vis, ASTM D5293, cp at C 6,260 at -30 C MRV Vis, ASTM D4684, cp at C 30,054 at -35 C MRV Yield Stress, ASTM D4684, Pa at C <35 Pour Point, ASTM D97, F ( C) -44 (-42) TBN (Total Base No.), ASTM D Color, ASTM D1500 L5.5 Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

11 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS MONOGRADES Date 06/18 Engine Oils APPLICATIONS: Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are recommended for hydraulic systems, transmissions and engines that recommend a Monograde engine oil type lubricant. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are formulated with premium base oils and additives to reduce wear and extend component life. Recommended for Service Category CF (obsolete) Recommended for Service Category CF-2 (obsolete) Hydraulic systems where engine oils are recommended MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS MONOGRADES Material Code SAE Grade 10W Gravity, ASTM D4052, API Density, lbs/gal Specifc Gravity at 60F Flash Point, ASTM D92 (COC), F ( C) Viscosity, ASTM D445, cst at 40 C cst at 100 C Viscosity Index, ASTM D CCS Viscosity, ASTM D5293, cp 3900 at -25C NR NR NR MRV Pumpability, ASTM D4684, cp 9180 at -30C NR NR NR MRV Yield Stress at -25 C, ASTM D4684 <35 at -30C NR NR NR Pour Point, ASTM D97, F ( C) -38 (-39) -33 (-36) -33 (-36) -22 (-30) Color, ASTM D1500 L3.0 L2.5 L2.5 L3.5 Sulfated Ash, ASTM D874, m% NR = Requirement Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

12 Engine Oils MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS Date 06/18 Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are performance engineered with proprietary additive technology. Designed to ensure long lasting engine durability under the toughest operating conditions. Meets the performance demands of newer engine hardware. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are recommended for commercial overthe-road fleets, agriculture, construction equipment, buses, automobiles, and other similar dieselpowered applications where a premium quality engine oil is required. Engineered to provide long engine life in challenging service conditions Double the oil durability protection compared to conventional CJ-4 engine oils. Always follow OEM recommendations when extending oil drain intervals Maintains viscosity over extended service intervals, even under extreme operating conditions Recommended for low emission Tier 4 and on-highway low emission engines SAE 10W-30 improves fuel economy up to 3% compared to conventional 15W-40 viscosity grade oils PERFORMANCE CAPABILITIES: SAE VISCOSITY GRADE 10W-30 15W-40 RECOMMENDED FOR: CK-4 CJ-4 CI-4 PLUS CI-4 CH-4 SN Caterpillar ECF-3 Cummins CES Detroit Diesel 93K222 Volvo/Mack/Renault/VDS-4.5/EOS-4.5/RLD-4 Paccar Navistar - International Ford WSS-M2C171-F1 Notes: Consult owner's manual for proper SAE viscosity grade and API Service Category. Optimum drain intervals can be achieved utilizing oil analysis in conjunction with OEM guidelines. (Continued) M

13 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS (Continued) Date 06/18 - (Continued) Engine Oils Category Mystik JT-8 API CJ-4 Mystik JT-8 API CK-4 Back serviceable YES YES Viscosity grades 15W-40/10W-30 15W-40/10W-30 Fleet million mile engine test rating Better Best 100% improved oxidation stability NO YES Greater shear stability vs. conventional API CJ-4 YES YES Aeration control vs. conventional API CJ-4 Better Best SAE 10W-30 sustains improved fuel economy through 50,000 miles API Comparison Chart Better Compatible with conventional API CJ-4 oils YES YES Best Overall Performance and Backward compatibility Better Best Best MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS Material Code SAE Grade 10W-30 15W-40 Gravity, ASTM D4052, API at 60 F Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosity at 40 C, cst C, cst Viscosity Index CCS Viscosity, Temperature -25 C -20 C MRV Viscosity, Temperature -30 C -25 C MRV Yield Stress, Temperature <35 <35 Pour Point, F ( C) -38 (-39) -33 (-36) Flash Point, COC, F ( C) 432 (222) 450 (232) Noack Evaporative, ASTM D5800, % Loss Color, ASTM D1500 L3.0 L3.5 Total Base Number, ASTM D Sulfated Ash, ASTM D874, % wt Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

14 Engine Oils MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS SAE 10W-40 AND SAE 15W-50 Date 05/18 Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oil SAE 10W-40 provides an improvement in cold weather start up lubrication while providing excellent wear protection at higher operating temperatures. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oil SAE 15W-50 is designed for the equipment owner operating with older equipment with higher hours or miles that can benefit from a higher viscosity grade heavy duty engine oil. Both SAE grades are engineered to provide excellent protection for equipment operating in severe conditions and will provide extended diesel engine life. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils SAE 10W-40 and SAE 15W-50 are recommended for commercial over-the-road fleets, construction equipment, buses and other similar diesel-powered applications where premium quality engine is required. MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS SAE 10W-40 AND SAE 15W-50 Material Code SAE Grade 10W-40 15W-50 API Service Category CK-4 CI-4 Plus Gravity, ASTM D 4052, API Density, lbs/gal Flash Point, ASTM D 92 (COC), F ( C) 442 (228) 440 (227) Viscosity, ASTM D 445, cst at 40 C cst at 100 C Viscosity Index, ASTM D CCS Viscosity, ASTM D 5293, cp 5700 at -25C 5300 at -20C MRV Pumpability, ASTM D 4684, cp 39,000 at -30C 23,100 at -25C MRV Yield Stress at -25 C, ASTM D 4684 <35 at -30C <35 at -25C Pour Point, ASTM D 97, F ( C) -49 (-45) 49 (-45) Color, ASTM D 1500 L3.5 L4.0 Sulfated Ash, ASTM D 874, m% Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

15 MYSTIK JT-4 2-CYCLE LAWN AND GARDEN ENGINE OIL Date 06/18 Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is a premium performance synthetic blend lubricant designed for use in high performance air-cooled 2-cycle generators, chain saws, lawn mowers, snow blowers, leaf blowers, and trimmers. QUALITIES: Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is engineered for lower smoke and advanced protection for air cooled 2-cycle engines. This synthetic blend formula meets or exceeds the rigorous requirements of the API TC, JASO FD, FC and ISO-L-EGD classifications for 2-cycle air-cooled engine oils and also exceeds the performance requirements for JASO FC, JASO FB; ISO-L-EGC and -EGB. This advanced oil helps to protects today s high RPM air cooled 2-cycle engines against exhaust port blocking, combustion chamber and piston deposits, ring sticking and scuffing, and wear. The JASO FD Certification number for this lubricant is 001 MYS 091. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is formulated with premium base oils and a new low ash additive package that provides excellent lubricity and detergency performance which surpasses the standard for preventing piston and combustion chamber deposits. In addition, Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is a synthetic blend which reduces exhaust smoke and prevents piston seizure and cylinder scuffing. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil mixes readily with fuel for pre-mix type, even at low temperatures. Small Engine Oils APPLICATIONS: Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is recommended for use in air-cooled, 2-cycle applications where an API TC, JASO FD, FC or ISO-L-EGD product is preferred. It can be used in either premix or oil injection systems up to 50:1 fuel to oil ratios. Do not use in engines requiring an NMMA TC-W3, TC-WII, or TC-W product. Consult owner s manual for fluid specifications. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil can be used in 2-cycle powered generators, chain saws, lawn mowers, snow blowers, leaf blowers, and trimmers operating in hot, dirty, dusty environments and high loads for extended periods. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil provides the necessary protection to keep your air-cooled 2-cycle engine running cleaner, longer and with less smoke. MYSTIK JT-4 2-CYCLE LAWN AND GARDEN ENGINE OIL Material Code Gravity, ASTM D4052, API 32.0 Density, lb/gal, at 60 F 7.21 Flash Point, PMCC, ASTM D93, F ( C) 185 (85) Flash Point, COC, ASTM D92, F ( C) 203 (95) Viscosity, ASTM D445, cst at 40 C 55 cst at 100 C 8.5 ASTM D2161, SUS at 100 F 281 SUS at 210 F 54.8 Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -49 (-45) Appearance, Color Purple Sulfated Ash, ASTM D874, % 0.13 Total Base Number, ASTM D2896, mg KOH/g 2.2 Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

16 MYSTIK JT-4 2-CYCLE PREMIUM OUTBOARD ENGINE OIL Date 06/18 Mystik JT-4 2-Cycle Premium Outboard Engine Oil is an ashless lubricant guaranteed to protect 2-cycle marine engines and marine OEM warranties. Small Engine Oils BENEFITS: APPLICATIONS: Designed for premix type outboard engines. Helps reduce piston ring sticking and scuffing. Readily mixes with gasoline. Mystik JT-4 2-Cycle Premium Outboard Engine Oil is recommended for water-cooled or liquid-cooled 2-cycle engines requiring an NMMA TC-W3, TC-WII or TC-W type oil. It may also be used in many air-cooled 2-cycle engine applications requiring TC-W3 or API Service Category TC. Recommended for pre-mix systems. Consult owner s manual for fluid specifications. Mystik JT-4 2-Cycle Premium Outboard Engine Oil will provide protection for gasoline fueled 2-cycle engines when used at the primary dilution recommended by the original equipment manufacturer. DO NOT USE IN 4-CYCLE ENGINES! MYSTIK JT-4 2-CYCLE PREMIUM OUTBOARD ENGINE OIL Material Code Gravity, ASTM D4052, API 31.5 Density, lb/gal at 60 F 7.23 Flash Point, PMCC, ASTM D93, F ( C) 178 (81) 1 Flash Point, COC, ASTM D92, F ( C) 197 (92) Viscosity, ASTM D445 cst at 40 C 32 cst at 100 C 5.9 Viscosity, ASTM D2161 SUS at 100 F 163 SUS at 210 F 46 Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -28 (-39) Appearance, Color Blue/Green Sulfated Ash, ASTM D874, % <0.004 Total Base Number, ASTM D2896, mg KOH/g 8.6 NOTE (1) DOT Combustible Liquid Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

17 MYSTIK JT-4 2-CYCLE PREMIUM PLUS OUTBOARD ENGINE OIL Date 06/18 Mystik JT-4 2-Cycle Premium Plus Outboard Engine Oil, a synthetic blend, provides superb protection for high performance, high horsepower, 2-cycle outboard marine engines. It effectively combats wear, scuffing and deposit problems. It provides high-temperature oxidation resistance, corrosion protection, superior engine cleanliness, enhanced lubricity for longer engine life and is guaranteed to protect marine OEM warranties. QUALITIES: Significantly reduces carbon or deposit build-up on engine parts and piston ring sticking. For direct injection or pre-mix; mixes readily at low temperatures High film strength for improved lubricity which provides: Increased engine efficiency Excellent scuffing and wear protection Cleaner, better-running engines producing less smoke. Small Engine Oils APPLICATIONS: Mystik JT-4 2-Cycle Premium Plus Outboard Engine Oil is recommended for all water-cooled or liquid-cooled 2-cycle engines requiring NMMA TC-W3, TC-WII or TC-W type oil. It may also be used in many air-cooled 2-cycle engine applications requiring TC-W3 or API Service Category TC. Recommended for both direct injected and pre-mix systems. Consult owner s manual for fluid specification. Mystik JT-4 2-Cycle Premium Plus Outboard Engine Oil will provide outstanding protection for gasoline fueled 2-cycle engines when used at the primary dilution recommended by the original equipment manufacturer. DO NOT USE IN 4-CYCLE ENGINES! MYSTIK JT-4 2-CYCLE PREMIUM PLUS OUTBOARD ENGINE OIL Material Code Gravity, ASTM D287, API 31.8 Density lbs/gal at 60 F Flash Point, PMCC, ASTM D93, F ( C) 144 (62) 1 Flash Point, COC, ASTM D92, F ( C) 185 (85) Viscosity, ASTM D C C 6.0 Viscosity, ASTM D2161 SUS at 100 F 159 SUS at 210 F 47 Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -54 (-48) Appearance, Color Green Sulfated Ash, ASTM D874, % 0.04 Total Base Number, ASTM D2896, mg KOH/g 9.7 NOTE (1) DOT Combustible Liquid Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

18 MYSTIK JT-4 ALL-IN-ONE OUTBOARD ENGINE OIL Date 06/18 Mystik JT-4 ALL-IN-ONE Outboard Engine Oil is a unique ultra-premium, licensed NMMA TC-W3 2-cycle oil with a fuel stabilizer, ethanol treatment and engine cleaner that guarantees to protect marine engines through their OEM warranty period and beyond. Small Engine Oils FEATURES: APPLICATIONS: Contains fuel stabilizer Contains ethanol fuel treatment Contains powerful detergents to remove existing carbon deposits from engine parts. Ashless chemistry Mystik JT-4 ALL-IN-ONE Outboard Engine Oil can be used in multiple 2-cycle engines requiring TC-W3 and API TC engine oils including: Marine outboard engines, personal watercraft (PWC) Recreation equipment ATVs, snowmobiles, motorcycles, dirt bikes Other power equipment: chain saws, chippers/shredders, log splitters, snow blowers, generators Lawn and garden: push mowers, lawn tractors, leaf blowers/vacuums, edgers, trimmers, tillers This superior product helps prevent the adverse effects that ethanol fuel can have on marine engines. It cleans up deposits left from other 2-cycle products and can be used with new engines to ensure trouble free operation, to maintain engines at the start or end of a season and to help bring old engines back to life. Mystik JT-4 ALL-IN-ONE Outboard Engine Oil provides outstanding protection for gasoline fueled 2-cycle engines when used at the primary dilution recommended by the original equipment manufacturer. MYSTIK JT-4 ALL-IN-ONE OUTBOARD ENGINE OIL Material Code Gravity, ASTM D287, API 26.2 Density lbs/gal at 60 F 7.47 Flash Point, PMCC, ASTM D93, F ( C) 176 (80) 1 Pour Point, ASTM D97, F ( C) 60 ( 51) Viscosity, ASTM D445, cst at 40 C 62 cst at 100 C 9.8 ASTM D2161, SUS at 100 F 317 ASTM D 2161, SUS at 210 F 59.5 Viscosity Index, ASTM D Sulfated Ash, ASTM D874, m% Color Purple NOTE: (1) DOT Combustible Liquid Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

19 MYSTIK JT-4 SEA & SNOW 2-CYCLE ENGINE OIL Date 06/18 Mystik JT-4 Sea & Snow 2-Cycle Engine Oil is a synthetic blend, low smoke oil designed for use in high performance air- or liquid-cooled two-stroke engines of Personal Water Craft (PWC) and Snowmobiles. QUALITIES: Mystik JT-4 Sea & Snow 2-Cycle Engine Oil is engineered for lower smoke and advanced protection for air-cooled 2-cycle engines. The synthetic blend formula meets or exceeds the rigorous requirements of the API TC, JASO FD and ISO-L-EGD classifications for 2-cycle air-cooled engine oils and also exceeds the performance requirements for JASO FC, JASO FB; ISO-L-EGC and -EGB. This advanced oil helps protect today s high performance air-cooled 2-cycle engines against exhaust port blocking, combustion chamber and piston deposits, ring sticking and scuffing, and wear. The JASO FD Certification number for this lubricant is 001 MYS 075. Mystik JT-4 Sea & Snow is formulated with premium base oils and a new synthetic low ash additive package that provides excellent lubricity and detergency performance that surpasses standards for preventing piston and combustion chamber deposits. In addition, Mystik JT-4 Sea & Snow is a synthetic blend which reduces exhaust smoke and prevents piston seizure and cylinder scuffing. Mystik JT-4 Sea & Snow mixes readily with fuel for pre-mix type, even at low temperatures. Small Engine Oils APPLICATIONS: Mystik JT-4 Sea & Snow 2-Cycle Engine Oil is recommended for use in air-cooled, 2-cycle applications where an API TC, JASO FD or ISO-L-EGD product is preferred. It can be used in either premix or oil injection systems up to 50:1 fuel ratios. It may also be used in certain motorcycle engines which are liquid cooled. Not recommended for engines requiring an NMMA TC-W3, TC-WII, or TC-W product. Consult owner s manual for fluid specifications. Mystik JT-4 Sea & Snow is formulated primarily for use in snowmobiles and personal watercraft. It can be used in 2-cycle motorcycles, generators, lawnmowers, and hand held power equipment such as leaf blowers, trimmers, and chainsaws. Mystik JT-4 Sea & Snow provides the necessary protection to keep your snowmobile or PWC running cleaner, longer, and with less smoke. DO NOT USE IN 4-CYCLE ENGINES! MYSTIK JT-4 SEA & SNOW 2-CYCLE ENGINE OIL Material Code Gravity, ASTM D4052, API 32.0 Density, lb/gal at 60 F 7.21 Flash Point, PMCC, ASTM D93, F ( C) 185 (85) COC, ASTM D92, F ( C) 203 (95) Viscosity, ASTM D445, cst at 40 C 55 cst at 100 C 8.5 ASTM D2161, SUS at 100 F 281 SUS at 210 F 54.8 Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -49 (-45) Appearance, Color Purple Sulfated Ash, ASTM D874, % 0.1 Total Base Number, ASTM D2896, mg KOH/g 2.2 Mystik, JT-4 and Sea & Snow are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

20 MYSTIK JT-4 SYNTHETIC 2-CYCLE PERSONAL WATERCRAFT ENGINE OIL Date 06/18 Small Engine Oils FEATURES: Mystik JT-4 Synthetic 2-Cycle Personal Watercraft Engine Oil utilizes premium synthetic base oils combined with a special synthetic additive system to provide superior high temperature oxidation stability and wear protection. Its unique tri-blend of synthetic components provides ideal high temperature performance and quick starts in all temperatures. This balance of synthetic components enhances fuel economy, and improves high temperature thermal and oxidation stability. The special additive system designed for specific use in Personal Watercraft engines provides the best protection against engine wear, rust and corrosion, and ensures engine cleanliness. The advanced formula used in Mystik JT-4 Synthetic 2-Cycle Personal Watercraft Engine Oil far exceeds Personal Watercraft engine requirements for an API TC and JASO FC quality oil. Provides superior protection in high temperatures Permits quick-fill lubrication flow during start-up to help reduce wear Promotes longer engine life through increased wear, rust and corrosion protection Improves equipment productivity and reliability RECOMMENDED: For use in all air-cooled or liquid-cooled 2-cycle (Injector or Premix) Personal Watercraft engines including those manufactured by Sea Doo, Kawasaki, Polaris, Yamaha, and other original equipment manufacturers. Mystik JT-4 Synthetic 2-Cycle Personal Watercraft Engine Oil is ideal for engines operating in high temperatures and where performance demands the most from your oil. Consult owners manual for fluid specifications. APPLICATIONS: Mystik JT-4 Synthetic 2-Cycle Personal Watercraft Engine Oil is recommended for use in 2-cycle Personal Watercraft engine applications requiring API TC and JASO FC quality oil. DO NOT USE IN OUTBOARD MARINE ENGINES! MYSTIK JT-4 SYNTHETIC 2-CYCLE PERSONAL WATERCRAFT ENGINE OIL Material Code Gravity, ASTM D287, API 32.9 Density lbs/gal 7.17 Flash Point, PMCC, ASTM D93, F ( C) 194 (90) Flash Point, ASTM D92, COC, F ( C) 230 (110) Pour Point, ASTM D97, F ( C) 54 ( 48) Viscosity, ASTM D C C 9.2 Viscosity Index, ASTM D Visual Color Purple Sulfated Ash, ASTM D874, m% TBN, ASTM D2896, mg KOH/g 4.3 Mystik and JT-4 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

21 MYSTIK JT-4 SYNTHETIC 2-CYCLE SNOWMOBILE ENGINE OIL Date 06/18 FEATURES: Mystik JT-4 Synthetic 2-Cycle Snowmobile Engine Oil utilizes premium synthetic base oils combined with a special synthetic additive system to provide superior cold temperature protection and quick starts in extreme cold. Its unique tri-blend of synthetic components provides ideal low temperature performance and quick starts in extreme cold. This balance of synthetic components enhances fuel economy, improves cold temperature performance and high temperature thermal stability. The special additive system is designed for specific use in Snowmobile engines. It provides the best protection against engine wear, rust and corrosion, and ensures engine cleanliness. The advanced formula used in Mystik JT-4 Synthetic 2-Cycle Snowmobile Engine Oil meets Snowmobile engine requirements for an API TC and JASO FC quality oil. Provides superior protection in temperature extremes Permits quick-fill lubrication flow during cold weather start-up to help reduce wear Promotes longer engine life through increased wear, rust and corrosion protection Improves equipment productivity and reliability Cleans power valves for improved performance Small Engine Oils RECOMMENDED: For use in all air-cooled or liquid-cooled 2-cycle (Injector or Premix) Snowmobile engines including those manufactured by Arctic Cat, Ski Doo, Polaris, Yamaha, and other original equipment manufacturers. Mystik JT-4 Synthetic 2-Cycle Snowmobile Engine Oil is ideal for engines operating in extreme cold temperatures and where performance demands the most from your oil. Consult owner s manual for proper fluid specification. APPLICATIONS: Mystik JT-4 Synthetic 2-Cycle Snowmobile Engine Oil is recommended for use in 2-cycle Snowmobile engine applications requiring API TC and JASO FC quality oil. DO NOT USE IN OUTBOARD MARINE ENGINES! MYSTIK JT-4 SYNTHETIC 2-CYCLE SNOWMOBILE ENGINE OIL Material Code Gravity, ASTM D287, API 32.9 Density lbs/gal 7.17 Flash Point, PMCC, ASTM D93, F ( C) 194 (90) Flash Point, ASTM D92, COC, F ( C) 230 (110) Pour Point, ASTM D97, F ( C) 54 ( 48) Viscosity, ASTM D C C 9.2 Viscosity Index, ASTM D Visual Color Purple Sulfated Ash, ASTM D874, m% TBN, ASTM D2896, mg KOH/g 4.3 Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

22 MYSTIK JT-4 4-CYCLE MARINE ENGINE OILS Date 06/18 Mystik JT-4 4-Cycle Marine Engine Oils are specially formulated, proven and certified for use in 4-cycle marine inboard, outboard and personal watercraft engines. The carefully crafted formulations are designed to provide maximum protection under the most demanding marine conditions. Small Engine Oils FEATURES: Formulated to meet the warranty requirements of Mercury, Yamaha, Evinrude and other leading OEM s Provides superior rust and corrosion protection in high-performance marine engines under the harshest of marine environments Outstanding scuff and wear protection Ensures maximum engine cleanliness Formulated to meet the demanding requirements of 4-cycle marine engines requiring NMMA FC-W oils Full Synthetic and Synthetic Blend formulations Multiple viscosity grades for comprehensive category coverage APPLICATIONS: For use in 4-cycle marine inboard, outboard and personal watercraft engines. Recommended in applications requiring NMMA FC-W. Meets warranty requirements of Mercury, Yamaha, Evinrude and other leading OEM s. Mystik JT-4 4-Cycle 10W-40 provides excellent protection for personal watercraft as well, and meets warranty requirements of Honda, Kawasaki, Polaris, Sea Doo and other original equipment. NOT FOR USE IN 2-CYCLE OR DIESEL ENGINES. Consult owner s manual for proper lubricant selection. MYSTIK JT-4 4-CYCLE MARINE ENGINE OILS Material Code SAE Grade 10W-30 10W-40 25W-40 25W-50 Full Synthetic Full Synthetic Syn Blend Syn Blend Gravity, ASTM D287, API Density, lbs/gal Flash Point, ASTM D92, COC F ( C) 437 (225) 453 (234) 455 (235) 500 (260) Pour Point, ASTM D97, F ( C) -27 (-33) -22 (-30) -6 (-21) -17 (-27) Viscosity, ASTM D445, cst at 40 C cst at 100 C Viscosity Index, ASTM D CCS Viscosity, cp at -25 C, ASTM D cp at -10 C, ASTM D NOACK Volatility, ATM D5800, % Loss Color, ASTM D Sulfated Ash, ASTM D874, m% TBN, ASTM D2896, mg KOH/g Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

23 MYSTIK JT-4 SYNTHETIC 4-CYCLE SNOWMOBILE MOTOR OIL SAE 0W-40 Date 06/18 FEATURES: Mystik JT-4 Synthetic 4-Cycle Snowmobile Motor Oil SAE 0W-40 utilizes premium synthetic base oils combined with a special synthetic additive system to provide superior cold temperature protection and quick starts in extreme cold. The synthetic components provide optimum low temperature performance while minimizing volatility. This balance of synthetic components enhances fuel economy, improves cold temperature performance and high temperature thermal stability. The special additive system is designed for specific use in Snowmobile engines. It provides the best protection against engine wear, rust and corrosion, and ensures engine cleanliness. The advanced formula used in Mystik JT-4 Synthetic 4-Cycle Snowmobile Motor Oil SAE 0W-40 far exceeds Snowmobile engine requirements for an API SL, JASO MA and NMMA FC-W quality oil. Provides superior protection in cold temperatures Permits quick-fill lubrication flow during cold weather start-up Promotes longer engine life through increased wear, rust and corrosion protection Improves equipment productivity and reliability Small Engine Oils RECOMMENDED: For use in 4-cycle Snowmobiles including those manufactures by Arctic Cat, Polaris, Ski-Doo, Yamaha, and other original equipment manufacturers. Mystik JT-4 Synthetic 4-Cycle Snowmobile Motor Oil SAE 0W-40 is ideal for engines operating in extreme cold weather and where performance demands the most from your oil. Consult owner s manual for proper lubricant selection. APPLICATIONS: Mystik JT-4 Synthetic 4-Cycle Snowmobile Motor Oil SAE 0W-40 is recommended for use in Snowmobile engine applications requiring an API SL, JASO MA and NMMA FC-W quality oil. DO NOT USE IN 2-CYCLE ENGINES! MYSTIK JT-4 SYNTHETIC 4-CYCLE SNOWMOBILE MOTOR OIL, SAE 0W-40 Material Code Gravity, ASTM D287, API 33.8 Density, lbs/gal 7.13 Flash Point, ASTM D92, COC, F ( C) 428 (220) Pour Point, ASTM D97, F ( C) 56 ( 51) Viscosity, ASTM D C C 14.8 Viscosity Index, ASTM D CCS Viscosity, cp ( C), ASTM D ( 35) NOACK Volatility, ASTM D5800, % Loss 7 Color, ASTM D Sulfated Ash, ASTM D874, m% 0.9 TBN, ASTM D2896, mg KOH/g 9.5 Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

24 MYSTIK JT-4 SYNTHETIC 4-CYCLE ALL-TERRAIN VEHICLE MOTOR OILS Date 06/18 Small Engine Oils FEATURES: Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils utilize premium synthetic base oils combined with a special additive system to provide outstanding protection for high performance All-Terrain Vehicle (ATV) and Utility Vehicle (UTV) engines. These full synthetic formulas provide optimum high and low temperature performance while minimizing volatility. This balance of synthetic technologies enhance fuel economy, improve cold temperature performance, and high temperature thermal and oxidation stability. The advanced additive systems are specifically designed for use in ATV and UTV engines. They provide superior protection against engine wear, rust and corrosion, and ensures engine cleanliness. Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils, available in SAE 0W-40, SAE 10W- 40 and SAE 10W-50 grades, provide extra protection for gasoline powered ATV and UTV engines requiring a JASO MA quality oil. Protect in extreme hot and cold temperatures Permit lubrication flow during cold weather start-up Promote longer engine life by reducing wear, rust and corrosion Provide excellent thermal and oxidation stability Improve equipment productivity and reliability RECOMMENDED: APPLICATIONS: For use in 4-cycle gasoline powered ATV and UTV engines including those manufactured by Arctic Cat, Bombardier, Honda, Kawasaki, Polaris (including 1000 ProStar), Yamaha, and other original equipment manufacturers. Ideal for high performance engines operating in extreme low and high temperatures and where performance demands the most from your oil. Select the SAE 0W-40 grade, if frequent usage at low temperatures is expected. Consult your owner s manual for proper lubricant selection. Mystik JT-4 Synthetic All-Terrain Vehicle Motor Oils are recommended for use in 4-cycle gasoline powered ATV and UTV engine applications requiring a JASO MA quality oil. Designed to be used in wet clutch applications that require JASO MA quality oil. MYSTIK JT-4 SYNTHETIC 4-CYCLE ALL-TERRAIN VEHICLE MOTOR OILS Material Codes SAE Grade 0W-40 10W-40 10W-50 Gravity, ASTM D287, API Density, lbs/gal Flash Point, ASTM D92, COC, F ( C) 428 (220) 453 (234) 457 (236) Pour Point, ASTM D97, F ( C) 56 ( 51) 22 ( 30) -39 (-39) Viscosity, ASTM D C C Viscosity Index, ASTM D CCS Viscosity, cp ( C), ASTM D ( 35) 5660 ( 25) 6592 (-25) NOACK Volatility, ASTM D5800, % Loss Color, ASTM D Sulfated Ash, ASTM D874, m% TBN, ASTM D2896, mg KOH/g Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

25 MYSTIK JT-4 PREMIUM HIGH PERFORMANCE LOWER UNIT GEAR LUBRICANT Date 06/18 Mystik JT-4 Premium High Performance Lower Unit Gear Lubricant is formulated specifically for the marine industry. It contains the latest generation of a proprietary EP additive system, designed to provide maximum protection against wear, rust, corrosion and deposits. QUALITIES: APPLICATIONS: This improved gear lubricant, specifically designed for boating applications, offers top level protection, surpassing other marine gear lubricants using GL-4 and GL-5 80W-90 technology: Superior EP lubrication and corrosion protection in the presence of moisture (fresh and sea water). Improved gear protection for shock load conditions encountered with harsh startup engagement, power reversal, and propeller entanglement. Recommended for use in all outboard and stern drive gear units specifying SAE 90, 80W-90 or 85W-90, including OMC Type C. Includes MerCruiser, OMC Cobra, Volvo stern drives and Mercury, Evinrude, Johnson, Mariner, Yamaha, Suzuki, and Force outboards. Small Engine Oils MYSTIK JT-4 PREMIUM HIGH PERFORMANCE LOWER UNIT GEAR LUBRICANT SAE GRADE 85W-90 Material Code Gravity, ASTM D4052, API 26.3 Density, lb/gal at 60 F 7.5 Flash Point, ASTM D92, COC, F ( C) 420 (216) Viscosity, cst at 100 C 16.0 Brookfield Viscosity, -23 C, cp 102,000 Pour Point, ASTM D97, F ( C) -15 (-26) Channel Point, F ( C), Max -31 (-35) Color, Visual Blue Foam Test, ASTM D892 Pass Copper Corrosion, 3 hrs at 250 F Pass Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

26 MYSTIK JT-7 EXTENDED RANGE FULL SYNTHETIC GEAR LUBRICANT SAE 75W-140 Date 06/18 Energy Efficiency Benefits and Better Protection Over a Wider Temperature Range This full synthetic gear lubricant provides energy efficiency benefits and excellent protection in HD service and over wide temperature ranges. It is designed with premium synthetic base lubricants and an extra performance additive system. It provides extra Extreme Pressure (EP) protection to minimize wear and scuffing. It is used in service fill lubrication of limited slip axles. It has outstanding thermal stability for long service life and it keeps gears clean and seals effective. Mystik JT-7 Extended Range Full Synthetic Gear Lubricant SAE 75W-140 saves energy by decreasing friction over an extreme range of operating conditions. It is shear stable and exceeds API Service MT-1 performance for use in non-synchronized manual transmissions used in buses and heavy-duty trucks. Automotive Gear Oils FEATURES: API Gear Service GL-5, GL-4 and MT-1. Also meets EP performance equivalent to former GL-6 Service fill lubricant for limited slip axles Superior oxidation resistance for extended drain intervals. 500,000 mile capable with heavy-duty severe-service Engineered with synthetic base lubricants and advanced shear stable and thermally stable additive system to achieve energy efficiency and improve performance Excellent extreme pressure (EP), wear, and scuff protection to reduce wear even under the most severe service conditions Outstanding oxidation resistance and thermal stability to resist deposit formation better than conventional gear oils High viscosity index and low pour point to function over a wider temperature range than conventional gear oils Effective rust and foam inhibitors protect bearings and gears Provides extremely good cold weather flow properties and high temperature lubrication; stays in grade Superior lubrication in cold operating conditions due to low pour points and improved flow properties Compatible with conventional and synthetic oils and materials designed for use with either type Improved fuel economy in heavy duty applications because of reduced friction and minimal lubricant drag. Energy savings are also obtained in industrial applications. Mystik JT-7 Extended Range Full Synthetic Gear Lubricant SAE 75W-140 usually eliminates any need for a seasonal oil change. The reduced number of viscosity grades required minimizes the chance of misapplication and reduces inventory. (Continued) M

27 MYSTIK JT-7 EXTENDED RANGE FULL SYNTHETIC GEAR LUBRICANT SAE 75W-140 (Continued) Date 06/18 - (Continued) APPLICATIONS: Mystik JT-7 Extended Range Full Synthetic SAE 75W-140 For HD transmissions, axles and other gear boxes where SAE 75W-140, 80W-140 or 85W-140 are specified along with API GL-5, GL-4, MT-1. MYSTIK JT-7 EXTENDED RANGE FULL SYNTHETIC GEAR LUBRICANT SAE 75W-140 Material Code SAE Grade 75W-140 Gravity, ASTM D4052, API 31 Density, lb/gal at 60 F 7.2 Specific Gravity at 60 F 0.87 Viscosities: at -26 C, cp 16,500 at -40 C, cp 138,000 at 40 C, cst 185 at 100 C, cst 25.8 Viscosity Index 174 Flash Point, ASTM D92, COC, F ( C) 370 (188) Pour Point, ASTM D97, F ( C) -42 (-41) Color, ASTM D Mystik and JT-7 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Automotive Gear Oils M

28 MYSTIK JT-7 MULTI-PURPOSE GEAR LUBRICANTS Date 07/18 Mystik JT-7 Multi-Purpose Gear Lubricants are multi-purpose, thermally stable, sulfur-phosphorus extreme pressure (EP) gear lubricants that exceed the performance requirements of the latest axle and non-synchronized manual transmission. A specially balanced additive provides thermally stable gear lubricants with exceptional durability under high temperature conditions. These are thermally stable and thermally durable gear lubricants. Others lose their EP performance when subjected to thermal stress. Mystik JT-7 Multi-Purpose Gear Lubricants can take the heat and continue to provide superior EP protection, minimum gear wear, excellent deposit control and improved rust and corrosion protection under extreme service conditions. Recommended for all automotive and heavy duty axle service including break-in, add-to or make-up, drain and refill, and for limited slip axles. (80W-90) Automotive Gear Oils FEATURES: Top quality, versatile hypoid EP gear lubricants; recommended in applications that specify API Gear Service GL-4, GL-5 and MT-1 and SAE J2360. Superior service in differentials of passenger cars and trucks and heavy duty equipment Excellent in limited slip differentials known as Sure-grip, Posi-trac, Trac-lock, etc., for complete fill or for top-off. (80W-90) Multiple viscosity grades with high viscosity index. Wide temperature range for all season application in most climates Have outstanding thermal stability/durability or long term heat resistance, better than most competitive conventional gear lubricants, thereby providing longer life at higher operating temperatures EP additive provides superior wear and scuff protection MYSTIK JT-7 MULTI-PURPOSE GEAR LUBRICANTS Material Code SAE Grade 80W-90 85W-140 AGMA Lubricant Number 4 EP 7 EP Gravity, ASTM D4052, API Density, lb/gal at 60 F Specific Gravity at 60 F Viscosities: at -12 C, cp 55,000 at -26 C, cp 90,000 at 40 C, cst at 100 C, cst at 100 F, cst (SUS) 172 (797) 514 (2380) at 210 F, cst (SUS) 17.4 (87.5) 33.6 (159) Viscosity Index Flash Point, ASTM D92, COC, F ( C) 403 (206) 438 (226) Pour Point, ASTM D97, F ( C) -27 (-33) 0 (-18) Color Red Red Mystik and JT-7 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

29 MYSTIK JT-7 SYNTHETIC BLEND SAE 75W-90 GEAR LUBRICANT Date 06/18 Energy Efficiency Benefits and Better Protection Over a Wider Temperature Range This synthetic blend gear lubricant provides energy efficiency benefits and excellent protection in HD service and over wide temperature ranges. It is designed with select synthetic base lubricants and a high performance additive system. It provides Extreme Pressure (EP) protection to minimize wear and scuffing. It is used in service fill lubrication of limited slip axles. It has outstanding thermal stability for long service life and it keeps gears clean and seals effective. Mystik JT-7 Synthetic Blend SAE 75W-90 Gear Lubricant saves energy by decreasing friction over an extreme range of operating conditions. It is shear stable and meets API Service MT-1 performance for use in non-synchronized manual transmissions used in buses and heavy-duty trucks FEATURES: API Gear Service GL-4, GL-5 and MT-1 Engineered with synthetic and highly refined conventional base oils and a thermally stable additive system to achieve energy efficiency and improve performance Excellent extreme pressure (EP) protection to reduce wear and scuffing even under the most severe service conditions Outstanding oxidation resistance and thermal stability to resist deposit formation better than conventional gear oils High viscosity index and low pour point to provide lubrication at extreme tempurature ranges Effective rust and foam inhibitors protect bearings and gears Shear stable viscosity modifier ensures viscosity stays in grade Compatible with conventional and synthetic oils and materials designed for use with either type oil Improved fuel economy in heavy duty applications because of reduced friction and minimal lubricant drag. Energy savings are also obtained in industrial applications. Mystik JT-7 Synthetic Blend SAE 75W-90 can eliminate the need for a seasonal oil change. Can be used in place of SAE 80W-90, reducing the number of vicosity grades required, minimizing inventory and the chance of misapplication Automotive Gear Oils (Continued) (Continued) M

30 MYSTIK JT-7 SYNTHETIC BLEND SAE 75W-90 GEAR LUBRICANT (Continued) Date 06/18 - (Continued) APPLICATIONS: Mystik JT-7 Synthetic Blend SAE 75W-90 Recommended for use in HD transmissions, axles and other gear boxes where API GL-4, GL-5, and/ or MT-1 are specified in viscosity grade SAE 75W-90 or 80W-90. MYSTIK JT-7 SYNTHETIC BLEND SAE 75W-90 GEAR LUBRICANT Material Code SAE Grade 75W-90 Automotive Gear Oils Gravity, ASTM D4052, API 30 Density, lb/gal at 60 F 7.3 Specific Gravity at 60 F 0.88 Viscosities: at -26 C, cp 16,500 at -40 C, cp 140,000 at 40 C, cst 113 at 100 C, cst 15.8 Viscosity Index 150 Flash Point, ASTM D92, COC, F ( C) 417 (214) Pour Point, ASTM D97, F ( C) -53 (-48) Color, ASTM D Mystik and JT-7 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

31 MYSTIK SX-7000 SYNTHETIC FLUIDS Date 06/18 FEATURES: The Ultimate in Extended Gear Protection Approved for Eaton Roadranger and Rockwell Extended Warranties Mystik SX-7000 Synthetic Fluids are heavy-duty, state-of-the-art premium synthetic lubricants accepted by the Eaton/Fuller Corporation and Rockwell for use in conjunction with their extended warranty programs. These lubricants will also provide exceptional service in Spicer/Dana transmissions and differentials. They meet API Service MT-1 performance requirements for use in non-synchronized manual transmissions used in buses and heavy-duty trucks. They exhibit superior performance at extreme temperatures and maximum component protection for the extended long haul. The high and low temperature performance and long-term thermal, oxidation and shear stability (resistance to viscosity loss in service) of these products is far superior to conventional transmission and drive axle lubricants. With up to 500,000 miles of useful life, these premium quality lubricants save the cost and inconvenience of frequent transmission and drive axle lube changes. That s ten times longer service in transmissions (50,000 miles normal) and two and a half times longer service in drive axles (100,000 miles normal) than using conventional petroleum-based lubricants. Today s aerodynamic designs, increased loads, and tighter schedules and margins demand superior lubricant performance in terms of thermal stability and component protection with reduced maintenance and downtime. Better operating performance can also be realized in terms of more horsepower and improved fuel mileage as a result of the superior lubricating properties of Mystik SX-7000 Synthetic Fluids. Product Name Description Use SX Synthetic SAE 50 Non-EP Transmission SX W-90 Synthetic SAE 75W-90 EP-Drive Axle/Transmission SX W-140 Synthetic SAE 80W-140 EP Drive Axle Extended drain intervals All-climate, year-round performance Highly stable under conditions of severe heat, oxidation, and shear Superior low temperature performance Extremely low channel points Improved component protection Reduced component wear Longer drive axle and lubricant life Extended seal life Good foam control Excellent demulsibility Improved fuel economy and horsepower Automotive Gear Oils (Continued) (Continued) M

32 MYSTIK SX-7000 SYNTHETIC FLUIDS (Continued) Date 06/18 - (Continued) Mystik SX-7000 Synthetic Fluids 75W-90 and 80W-140 are heavy duty extreme pressure (EP) GL-5 synthetic gear lubricants specially formulated for extended drain and severe service in heavy duty drive axles. Fully synthetic base stocks with high viscosity indexes and low pour points are blended with an EP additive along with rust, oxidation, and corrosion inhibitors to provide superior performance and protection. NOTE: Mystik SX , 75W-90 and 80W-140 meet or exceed all applicable performance requirements for: API Gear Lubricant Classification GL-5 and MT-1. API MT-1 denotes lubricants intended for non-synchronized manual transmissions used in buses and heavy-duty trucks. SAE J2360 Dana SHAES 429 Eaton Roadranger E500 SHAES 256 Rev. A (80W-140), Rev. C (75W-90) Arvin Meritor O-76N, O-76E (75W-90) Mercedes Benz MB Approval Mack GO-J (80W-140) Mack GO-J Plus (75W-90) Scania STO 1:0 International TMS-6816 General Electric D 50E9C Harnishfeger (P&H) 474 ZF TE-ML 07A/08 Automotive Gear Oils Mystik SX-7000 Synthetic Fluid SAE 50 is recommended for heavy-duty service in manual transmission for which the manufacturer recommends this SAE viscosity grade. It is formulated with specific antiwear, rust, oxidation, foam and corrosion inhibitors to protect bearings and synchronizers and to promote longer transmission life. As in the other products in this series, Mystik SX-7000 Synthetic Fluid SAE 50 provides improved start-up, easier shifting and less gear wear in low temperature environments. Less friction, less drag and improved oxidation resistance combine to provide fuel economy benefits and longer drain intervals. MYSTIK SX-7000 SYNTHETIC FLUIDS Material Code (MTF) SAE Viscosity Grade (J306-8) 50 75W-90 80W-140 AGMA Grade (ASTM D2422) 4 EP 5-6 EP Gravity, ASTM D4052, API Specific Gravity at 60 F Density, lb/gal at 60 F Viscosities: at -26 C, cp 90,000 at -40 C, cp 50, ,000 at 40 C, cst at 100 C, cst Viscosity Index Pour Point, ASTM D97, F ( C) -49 (-45) -48 (-54) -33 (-36) Channel Point, FTMS 3456, F ( C) -60 (-51) -55 (-48) Flash Point, ASTM D92, F ( C) 430 (221) 400 (205) 410 (210) Foam Test, ASTM D892, Sequence I, II, III Pass Pass Pass Copper Strip Corrosion, ASTM D130 3 hrs. at 250 F Pass Pass Pass Thermal Stability Test Pass Pass Pass Demulsibility Test Pass Pass Pass Timken OK Load, ASTM D2782, lb Four-Ball EP Weld Point, ASTM D2783, kgf 400 Four-Ball Load Wear Index, ASTM D2783, kgf 63.8 Color Mystik and SX-7000 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

33 MYSTIK UNIVERSAL GEAR LUBRICANT Date 7/18 For API Gear Lubricant Service: GL-4 Hypoid EP Mystik Universal Gear Lubricant contains a Sulfur-Phosphorus ( SP type) EP additive that provides antiwear and antiscuff lubricity. This product is recommended for gears subject to shock loading in service and for those gear set types requiring EP additive compounding because of their design characteristics. A Sulfur-Phosphorus ( SP type) mild EP additive provides antiwear and antiscuff lubricity for gears subject to shock loading in service and those gear set types requiring EP additive compounding because of their design characteristics. FEATURES: API Service Classification GL-4 May be used for add-to in automotive axles requiring a Hypoid EP lube except those incorporating limited slip or anti-spin features Economically satisfies industrial applications where large loss due to leakage is a factor MYSTIK UNIVERSAL GEAR LUBRICANT Material Code SAE Grade 90 AGMA Lubricant Number 4 EP Gravity ASTM D4052, API 22.9 Density, lb/gal at 60 F 7.6 Specific Gravity at 60 F Viscosities: at 40 C, cst 237 at 100 C, cst 16.5 at 100 F, cst (SUS) 275 (1273) at 210 F, cst (SUS) 17.1 (86.1) Viscosity Index 64 Flash Point, ASTM D92, COC, F ( C) 430 (221) Pour Point, ASTM D97, F ( C) -20 (-29) Color Dark Amber Automotive Gear Oils Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

34 MYSTIK JT-5 SYNTHETIC BLEND TFX Date 07/18 Mystik JT-5 Synthetic Blend TFX tractor fluid is a performance engineered tractor fluid for the equipment owner needing longer component life and ensuring optimum efficiency for many years of tillage and harvesting operations. The investment in today s farm tractors often requires longer ownership of 10 years or more while operating at lowest possible maintenance cost. Achieving maximum equipment productivity is required for survival with so many challenges facing modern farm profitability Mystik JT-5 Synthetic Blend TFX is recommended for leading tractor manufacturers such as John Deere, New Holland, Kubota and Case/IH MAT 3540 to provide the convenience of one product for improved inventory management for mixed farm fleets while achieving optimum performance. Mystik JT-5 Synthetic Blend TFX is designed for modern farm tractors that produce significantly more horsepower requiring greater protection for high production machines that impose much greater stress on transmissions, axles with multiple high output hydraulic applications. FEATURES & PERFORMANCE BENEFITS ADVANCED TECHNICAL FEATURES Synthetic Blend Shear stable viscosity with a high viscosity index PERFORMANCE BENEFIT Improves performance over wider temperature range and reduces tendency of fluid breakdown due to sustained high operating temperatures Maintains and sustains optimum viscosity over the service intervals to ensure overall productivity and efficiency Promotes longer component life of heavily loaded components Suitable for CVT transmissions that require a stable viscosity through temperature changes and for the life of the oil. Transmission/Power Fluids Non-Zinc anti-wear formulation Leak resistant-seal maintainer technology Special friction modifiers Clean system-detergent/dispersant Provides improved water tolerance that maintains efficiency throughout transmission, hydraulics and brake system Zinc free formula also reduces impact on environment Conditions seals to prevent leakage as equipment ages with higher hours of operation Improves brake system function and protects against brake chatter Helps minimize tendency for transmission clutch plate glazing from high temperature, deposit build up, protecting against loss of friction control and power transfer efficiency to the drive train. Maintains high pressure hydraulic system efficiency by preventing hydraulic valve deposit build up and sluggish operation. Double acting anti-rust/anti-foam technology Wide temperature range Anti-slip formulation Prevents system corrosion and controls tendency for air entrainment resulting in efficient power transfer. Excellent fluidity and start up lubrication that improves system response time in colder temperature operation Ensures power transfer efficiency under high loads in transmissions, axles and all hydraulic components (Continued) M

35 MYSTIK JT-5 SYNTHETIC BLEND TFX (Continued) Date 07/18 APPLICATIONS: RECOMMNED FOR THE FOLLOWING APPLICATIONS AGCO Power Fluid 821XL Allison C-4 CASE MS 1205, 1206, 1207, 1209, 1210 CAT TO-2 Denison HF-0, HF-1, HF-2 Eaton Hydraulics Ford New Holland ESN-M2C134-D Kubota UDT, Super UDT API GL-4 Case New Holland: MAT 3540, MAT 3525, MAT 3505 John Deere J20C Massey Ferguson M-1145 White Q-1826 Volo WB101 ZF TE-ML-03E, TE-ML-05F, TE-ML-17E, TE-ML-21F For use in the following OEM equipment: AGCO CASE IH Deutz Ford John Deere Komatsu Kubota Massey Ferguson New Holland White, and others. MYSTIK JT-5 SYNTHETIC BLEND TFX Material Code API Gravity, ASTM D4052, API 31.0 Density, lb/gal 7.3 Specific Gravity 0.88 Viscosities: at -20 C, cp 3493 at -35 C, cp at 40 C, cst at 100 C, cst 9.56 Viscosity Index 146 KRL Sheared Viscosity (20hr.) CEC L-45-A-99, cst 8.2 (Tapered Roller Bearing Shear Test) Tractor FZG ASTM D4998 Weight loss 19mg (Max is 50mg) Flash Point, COC, ASTM D92, F ( C) 457 (236) Pour Point, ASTM D97, F ( C) -43 (-45) Water Tolerance (Separation with 5% water) Ball EP Wear, ASTM D4172, mm 0.36 Color Light Amber Transmission/Power Fluids Mystik and JT-5 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

36 MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID Date 06/18 Mystik JT-5 Tractor Trans-Hydraulic Fluid provides excellent performance in modern agricultural equipment. It offers outstanding gear wear protection, brake chatter control and oxidation resistance. Particularly well suited for hard working applications where an added level of protection is desired. Excellent filterability characteristics along with rust and corrosion inhibitors, water tolerance and wide temperature range performance. FEATURES: Contains special friction modifiers for superior brake chatter control Formulated to resist leakage Formulated with advanced detergent/dispersant, antiwear, antioxidant, antirust and antifoam additives Has proven field performance Transmission/Power Fluids APPLICATIONS: Recommended for use in equipment where the following fluids are specified: AGCO Power Fluid 821XL Allison C-4 CASE MS 1205, 1206, 1207, 1209, 1210 CAT TO-2 Denison HF-0, HF-1, HF-2 Eaton Hydraulics Ford New Holland ESN-M2C134-D Kubota UDT API GL-4 Case New Holland: MAT 3525 John Deere J20C Massey Ferguson M-1145 White Q-1826 Suitable for use in the following equipment: AGCO CASE IH KH Deutz Ford John Deere Komatsu Kubota Massey Ferguson New Holland Volvo WB101 White, and others (Continued) M

37 MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID (Continued) Date 06/18 - (Continued) MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID Material Code API Gravity, ASTM D4052, API 31.0 Density, lb/gal 7.3 Specific Gravity 0.88 Viscosities: at -35 C, cp 48,200 at 40 C, cst 60.3 at 100 C, cst 9.3 Viscosity Index 130 Flash Point, COC, ASTM D92, F ( C) 457 (236) Pour Point, ASTM D97, F ( C) -40 (-40) Falex, ASTM D3233-A, lbs 1,350 4-Ball EP Wear, ASTM D4172, mm 0.38 Color Light Amber Mystik and JT-5 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Transmission/Power Fluids M

38 M Y S T I K M U L T I - P U R P O S E A T F Date 06/18 Mystik Multi-Purpose ATF is a multi-function, automatic transmission fluid manufactured from selected high-quality base stocks and premium additives. It protects transmission parts against rust, corrosion, and wear. It is dyed red for leak detection and is engineered to give superior protection and performance. Mystik Multi-Purpose ATF is recommended where the following lubricants are specified: General Motors transmissions calling for DEXRON -III, DEXRON-IIE and DEXRON-II fluids; Ford transmissions calling for MERCON type ATF s; Allison Transmission Division (C-4). FEATURES: A single fluid for a wide variety of power transmission uses: automotive automatic transmissions, industrial torque converters, sensitive hydraulic fluid applications, power-shift transmissions, Allison automatic transmissions and power steering fluids. Excellent stability for long life service Anti-wear, anti-leak, anti-foam treated Detergent inhibitor provides gum-up resistance Can be used industrially as an excellent multi-viscosity, all weather hydraulic fluid, torque converter fluid and as a cold temperature gear lubricant Meets the performance requirements of the following hydraulic fluid, power-shift transmission fluid and automatic transmission fluid specifications: Vickers M-2950-S and I-286-S Caterpillar TO-2 Allison Type C-3 and C-4 GM DEXRON IIIG/H, IID/E Ford MERCON Ford ESP-M2C166H APPLICATIONS: Recommended for use in automatic transmissions manufactured by General Motors and Ford for model years 2006 and prior (except those calling for FORD Type F Fluid, MERCON SP, MERCON V, DEXRON-VI and CVT fluids). Suitable for use in foreign cars and trucks requiring the use of DEXRON-III, DEXRON-IIE, DEXRON-II fluids, and MERCON type ATF s. Consult owner s manual for fluid specification. Transmission/Power Fluids MYSTIK MULTI PURPOSE ATF Material Code Gravity, ASTM D4052, API 33.0 Pounds Per Gallon 7.16 Flash Point, ASTM D92, COC, F ( C) 424 (218) Pour Pont, ASTM D97, F ( C) -54 (-48) Viscosity, ASTM D445, cst at 40 C 34.3 cst at 100 C 6.95 ASTM D2983, cp at -20 C 1,020 cp at -40 C 15,100 Vicosity Index, ASTM D Color Red Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

39 M Y S T I K S Y N T H E T I C B L E N D M U L T I - V E H I C L E A T F Date 06/18 Mystik Synthetic Blend Multi-Vehicle ATF contains the highest quality synthetic and mineral oil base stocks combined with a state-of-the-art additive system to provide superior performance in automatic and powershift transmissions. It is suitable for use in transmissions calling for Ford MERCON V, Ford MERCON (obsolete), General Motors DEXRON -IIIH (obsolete), and Allison C-4 type fluids. FEATURES: Superior oxidation and thermal stability Outstanding anti-wear performance for protection of transmission hardware Excellent cold temperature flow properties Compatible with a wide range of seal materials to prevent transmission leaks Can be used in most vehicles Provides inventory optimization (multi-vehicle compatible) without the use of ATF supplements APPLICATIONS: Mystik Synthetic Blend Multi-Vehicle ATF is suitable for use in GM, Ford, Toyota, Honda, Nissan, Hyundai and other imported vehicles where the following applications are recommended: Ford MERCON and MERCON V* (Not recommended for use in California) GM DEXRON-II and DEXRON-III Allison C-4 BMW LT-71141, ETL-7045E, 2634, 8072B. Nissan/Infiniti Nissan ATF, Matic D, Matic J, and Matic K Mitsubishi Diamond SP-II and SP-III Hyundai/KIA SP-II and SP-III Toyota/Lexus Type T, T-III and T-IV Honda/Acura ATF-Z1 (except in CVTs) Mercedes Benz 236.3;.5;.6;.7;.9;.10; and.11; ATF 3403 M-115 Volvo Standard 1273,41 (Transmission oil 97341); ; / JWS 3309 Volkswagen/Audi G (A2); G052055; G (A1, A2); G (A2); G (A2); GUS ZF TE-ML 11A; 11B JASO 1A MAN 339A Mazda Type T-IV Subaru ATF-HP Renault Matic D2 *Please note that California law prohibits manufacturers of multi-vehicle ATF from recommending products in certain applications where the viscometrics do not match those of official OEM specifications. CITGO therefore does not recommend the use of Mystik Synthetic Blend Multi-Vehicle ATF in these applications in California. Do not use Mystik Synthetic Blend Multi-Vehicle ATF in vehicles calling for Type F, DEXRON VI, MERCON SP, MERCON LV, Toyota/Lexus WS, and CVT s. Consult owner s manual for proper fluid specification. (Continued) Transmission/Power Fluids M

40 M Y S T I K S Y N T H E T I C B L E N D M U L T I - V E H I C L E A T F (Continued) Date 06/18 - (Continued) MYSTIK SYNTHETIC BLEND MULTI VEHICLE ATF Material Code Viscosity, cst at 40 C 35 Viscosity, cst at 100 C 7.2 Viscosity Index 178 Specific 60 F Pour Point, ASTM D97, F ( C) -60 (-51) Brookfield -40 C, cp 9600 Appearance Red Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Transmission/Power Fluids M

41 M Y S T I K L U B R I C A N T S T E N A X F L U I D S Date 06/18 FEATURES: APPLICATIONS: Meets The Requirements of Caterpillar TO-4 And Allison C-4 Manufacturers of heavy duty equipment are continually upgrading their machines and components. Significant improvements in transmissions and final drives have increased equipment durability and productivity, but have also increased the workload on gears and bearings, and required the development of new and diverse friction materials. The use of the correct lubricant to support these new designs is critical. Mystik Lubricants Tenax Fluids are heavy duty transmission and final drive lubricants formulated to meet the performance requirements of Caterpillar TO-4 (10W, 30, & 50) and Allison C-4 (10W & 30). They provide the protective qualities essential to maximize equipment life and performance. Meets the performance requirements of Caterpillar TO-4 The SAE 10 and SAE 30 meet the Allison C-4 specification Recommended for use in heavy duty powershift transmissions, final drives, hydrostatic transmissions, torque converters and hydraulics where a TO-4 or C-4 fluid is recommended. These products are not recommended as engine lubricants. SAE 50 can be used in Eaton/Fuller, Rockwell and Dana/Spicer transmissions for service-fill Excellent performance in ZF powershift transmissions used in off-road machines, special vehicles and lift trucks MYSTIK LUBRICANTS TENAX FLUIDS Material Code SAE Grade 10W Gravity, ASTM D4052, API Density, lb/gal Specific Gravity Viscosity: at -35 C, cp 23, at 40 C, cst at 100 C, cst Viscosity Index Flash Point, ASTM D92, COC, F ( C) 420 (216) 446 (230) 511 (266) Pour Point, ASTM D97, F ( C) -38 (-39) -27 (-33) 0 (-18) Color, ASTM D1500 L Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Transmission/Power Fluids M

42 M Y S T I K T W I N D I S C F L U I D Date 06/18 For 3-Stage Torque Converters made by the Twin Disc Clutch Company Approved List S364C Mystik Twin Disc Fluid is a very low viscosity, low friction fluid with antifoam inhibitor and is for specialized applications. Certain Twin Disc Clutch company converters do not use this type fluid. May also be used as an ISO 2 Spindle Oil. MYSTIK TWIN DISC FLUID Material Code Viscosity Grade: SAE Grade Thinner than SAE 5W ISO Grade (Approx.) 2 Gravity, ASTM D4052, API 43.0 Density, lb/gal 6.75 Specific Gravity Viscosities: at 40 C, cst 2.5 at 100 F, cst (SUS) 2.67 (34.3) Flash Point, ASTM D92, F ( C) 187 (86) Fire Point, ASTM D92, F ( C) 198 (92) Pour Point, ASTM D97, F ( C) -40 (-40) Distillation, IBP 378 Aniline Point, ASTM D611, F ( C) 180 (82) Carbon Residue, Weight % 0.01 Color Red Transmission/Power Fluids NOTE: Certain Twin Disc Company converters do not use this type fluid. Make certain the unit involved requires a fluid listed on Twin Disc Approved List Sheet S364C. Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

43 MYSTIK CENTRA-LUBE TM GREASE Date 05/18 FEATURES: APPLICATIONS: Mystik Centra-Lube Grease is designed as an anti-leak industrial semi-fluid gear grease for industrial gearboxes and automatic, centralized lube systems where harder consistency greases are not pumpable in cold weather. It is ideal for leaky gearboxes and applications that are difficult to service. This premium quality product contains extreme pressure, antiwear, antirust, and antioxidant additives. Self leveling Excellent wear protection and load carrying capability Outstanding water resistance, protects against corrosion Recommended for centralized lubrication systems and grease filled gear boxes As an industrial semi-fluid grease Underground mine pressure gear systems and conveyor drive gearboxes An antileak EP gear lubricant For centralized lube systems where harder consistency greases are not pumpable in cold weather Consult owner s manual for proper lubricant selection. APPROVALS: NSF H2 (125249) CLASSIFICATION: Nonfood Compounds Program Listed H2 Registration No MYSTIK CENTRA-LUBE GREASE Material Code NLGI Grade 0 to 00 Thickener Type Lithium 12-Hydroxystearate Texture Smooth, Adhesive Color Amber Worked Penetration, ASTM D Rust Prevention, ASTM D1743, rating Pass Copper Corrosion, ASTM D4048, rating 1b Oxidation, ASTM D942, psi 100 hrs 2.5 Timken OK Load, ASTM D2509, lb. 60 Approximate Temperature Range, F ( C) 0 to 250 (-18 to 121) Base Oil: 40 C, cst 360 Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20024 Greases 38

44 MYSTIK GENERAL PURPOSE GREASE Date 05/18 Mystik General Purpose Grease is a multi-purpose grease especially suited for normal temperature/ speed conditions and non-critical service applications. This product is recommended for applications requiring frequent re-greasing due to a contaminating environment. FEATURES: Water Resistant Economical Consult owner s manual for proper lubricant selection. MYSTIK GENERAL PURPOSE GREASE Material Code NLGI Consistency Number 2 Thickener Type Lithium Stearate Texture Smooth, Medium Fiber Color Dark Brown Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 320 (160) Approximate Application Temperature Range, F ( C) 0 to 265 (-18 to 129) Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. Greases M

45 MYSTIK JT-6 HIGH PERFORMANCE MARINE GREASE Date 05/18 Mystik JT-6 High Performance Marine Grease is a smooth but tacky blue grease with outstanding water resistance. It is designed to provide excellent lubrication for greased chassis points and other wet-environment applications. QUALITIES: APPLICATIONS: Mystik JT-6 High Performance Marine Grease combines an anhydrous calcium thickener system, special polymer and a proprietary additive system to ensure superior performance against rusting in both fresh and sea water marine applications. Premium high performance extreme pressure marine grease Outstanding water washout resistance, protects against saltwater corrosion Excellent wear protection and load carrying capability Polymer fortified for excellent metal adhesion Recommended for marine applications including greased automotive chassis points, trailer wheel bearings, bearing buddies, boat lifts, hydraulic jack plates, steering components, tilt and trim systems, etc. Lubricates well over a wide temperature range 0 to 250 F. It is not recommended for disc brake wheel bearings. Mystik JT-6 High Performance Marine Grease is also an excellent choice in nonmarine applications where a general multi-purpose EP grease with an outstanding water and corrosion resistance is desired water pumps, fifth wheels and other equipment operating in wet conditions. Consult owner s manual for proper lubricant selection. MYSTIK JT-6 HIGH PERFORMANCE MARINE GREASE NLGI Grade 2 Material Code Thickener Type Anhydrous Calcium Texture Smooth, Adhesive Color, Observed Blue Worked Penetration, ASTM D Approximate Temperature Range, F ( C) 0 to 250 (-18 to 121) Dropping Point, ASTM D566, F ( C) 290 (143) Water Washout, ASTM D1264, % 100 F 0.9 Oil Separation, ASTM D1742, % loss <1 Rust Prevention, ASTM D1743, rating Pass Copper Corrosion, ASTM D4048, rating 1b Synthetic Sea Water Corrosion, ASTM D5969, rating Pass Timken OK Load, ASTM D2509, lb 55 Four-Ball Weld, ASTM D2596, kgf 250 Four-Ball Wear, ASTM D2266, mm 0.6 Base Oil Viscosity: 40 C, cst 1080 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20086 Greases 40

46 MYSTIK JT-6 HI-TEMP GREASES Date 07/18 APPLICATIONS: APPROVALS: NLGI Certified GC-LB These high temperature Lithium Complex greases combine excellent multi-purpose properties with a high dropping point to give them application over a wide temperature range. Mystik JT-6 Hi-Temp greases exhibit a high Timken OK Load in addition to providing excellent Four-Ball Wear and EP performance. They provide superior protection to lubricate a wide variety of automotive, agricultural, trucking, mining, construction, and industrial equipment. They provide outstanding shock load protection. JT-6 Hi-Temp No. 2 is an extremely versatile performer that is highly recommended for disc brake wheel bearings and is specifically approved for use in Rockwell and Spicer universal joints. This grease provides excellent protection for heavily loaded industrial, mining, and construction applications. JT-6 Hi-Temp No. 1 was developed for applications where service conditions dictate a grease of softer consistency. Both meet the highest performance categories of ASTM D4950 Automotive Grease Classification System, GC for wheel bearing service and LB for chassis service. Mystik JT-6 Hi-Temp Greases provide excellent protection in severe service requirements such as disc brake wheel bearings, backhoe hinge pins, and conveyor bearings Mining operations, sand/gravel plants, and construction equipment where shock loads are placed on bearings benefit from the use of Mystik JT-6 Hi-Temp Greases Consult owner s manual for proper lubricant selection. Dana Corporation Spicer Universal/Joint Division M-2006-J (#2) Registered NLGI GC-LB Weatherford Artificial Lift (#2) NSF H2 (125250) CLASSIFICATION: Nonfood Compounds Program Listed H2 Registration No (Continued) Greases M

47 MYSTIK JT-6 HI-TEMP GREASES Date (Continued) 07/18 - (Continued) MYSTIK JT-6 HI-TEMP GREASES Material Code NLGI Consistency Number 1 2 NLGI Certified, ASTM D4950 GC-LB GC-LB Thickener Type Lithium Complex Lithium Complex Texture Smooth, Adhesive Smooth, Adhesive Color Red Red Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C) 500 (260) 550 (288) Water Washout, ASTM D1264, % 175 F Rust Prevention, ASTM D1743, rating Pass Pass Copper Corrosion, ASTM D4048, rating 1b 1b Oil Separation, ASTM D1742, % loss 2 1 Timken OK Load, ASTM D2509, lb Four-Ball Wear, ASTM D2266, mm Four-Ball Weld, ASTM D2596, kgf Four-Ball Load Wear Index, ASTM D2596, kgf Approximate Temperature Range, F ( C) -10 to to 325 (-23 to 163) (-23 to 163) Base Oil Viscosity: 40 C, cst Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20026 Greases 42

48 MYSTIK JT-6 HI-TEMP GREASE WITH MOLY Date 05/18 FEATURES: Mystik JT-6 Hi-Temp Grease with Moly is a high performance mining and construction grease that provides superior performance where a moly-compounded, adhesive, multi-purpose high temperature lithium complex grease is required. This product gives optimum protection in severe environments. An exceptionally versatile premium quality multi-purpose lithium complex grease Fully additive treated. EP/antiwear, rust and oxidation inhibited Contains 3% Molybdenum Disulfide (moly) for extreme service conditions found in mining, construction, and severe industrial applications Water insoluble and water washout resistant Superior wheel bearing and chassis performance Superior protection to lubricate a wide variety of heavy duty automotive, agricultural, trucking, industrial, mining, and construction equipment Consult owner s manual for proper lubricant selection. APPROVAL: AUTOMOTIVE WHEEL BEARING & CHASSIS LUBRICANT GC-LB MYSTIK JT-6 HI-TEMP GREASE WITH MOLY Material Code NLGI Consistency Number 2 Thickener Type Lithium Complex Texture Smooth, Adhesive Filler, % Molybdenum Disulfide 3% Color Gray/Black Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C) 500 (260) Min. Water Washout, ASTM D1264, % 175 F 2.5 Rust Prevention, ASTM D1743, rating Pass Copper Corrosion, ASTM D4048, rating 1b Oil Separation, ASTM D1742, % loss 1.0 Timken OK Load, ASTM D2509, lb. 60 Four-Ball Wear, ASTM D2266, mm 0.45 Four-Ball Weld, ASTM D2596, kgf 400 Approximate Application Temperature Range, F ( C) -10 to 325 (-23 to 163) Base Oil Viscosity: 40 C, cst 630 Greases Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

49 MYSTIK JT-6 SYNTHETIC HI-TEMP GREASES Date 05/18 FEATURES: APPLICATIONS: Mystik JT-6 Synthetic Hi-Temp Greases are high-temperature, full synthetic lithium complex greases that combine excellent multi-purpose properties with a high dropping point and low temperature pumpability that provides a wide operating temperature range. Mystik JT-6 Synthetic Hi-Temp Greases exhibit excellent wear control, EP performance and provide excellent water resistance critical in a variety of applications today. These products provide excellent corrosion protection in those applications with corrosive environments. Mystik JT-6 Synthetic Hi-Temp Greases provide superior protection in heavily loaded industrial, mining and construction applications as well as automotive service classification GC-LB with the ISO 220 #2. Premium quality lithium complex soap thickener Excellent corrosion protection, EP/AW Outstanding low temperature performance and pumpability Excellent water resistance Excellent high-temperature oxidation resistance Heavy Industrial Mining Steel Mills Construction Automotive Service (ISO 220 #2 Only) Consult owner s manual for proper lubricant selection. CLASSIFICATION: AUTOMOTIVE WHEEL BEARING & CHASSIS LUBRICANT GC-LB (Continued) M20072 Greases 44

50 MYSTIK JT-6 SYNTHETIC HI-TEMP GREASES (Continued) Date 05/18 - (Continued) MYSTIK JT-6 SYNTHETIC HI-TEMP GREASES Material Code NLGI Consistency Number Texture Smooth Smooth Smooth Color, Observed Blue Blue Blue Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C) 500 (260) 500 (260) 500 (260) Rust Prevention, ASTM D1743, rating Pass Pass Pass Emcor Corrosion Protection Pass Pass Pass 5% Synthetic Sea Water Corrosion Pass Pass Pass Water Washout, ASTM D1264, % Loss Oil Separation, ASTM D1742, g Loss 0.90 Four-Ball Weld, ASTM D2596, kgf NLGI Classification GC-LB Base Oil Viscosity: 40 C, cst Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. Greases M

51 MYSTIK JT-6 LO-TEMP EXTREME GREASE Date 05/18 Mystik JT-6 Lo-Temp Extreme Grease is light colored, low staining, and water resistant. It provides antiwear protection under high loads. It is a low to medium temperature range multi-purpose grease for bearings. Mystik JT-6 Lo-Temp Extreme Grease performs well in extremely cold temperatures where minimum friction is necessary and where high speeds are involved. This product can also be used where excellent rust protection is required and where equipment is stored or used intermittently. It is considered by many to be the ultimate mining grease due to its ability to lubricate over a wide temperature range. FEATURES: Outstanding low temperature performance Excellent anti-wear and extreme pressure protection Water resistant - seals out water and protects against corrosion Recommended operating temperature range -40 to 250 F APPLICATIONS: A low to medium temperature range multi-purpose grease for bearing and chassis applications For conditions where extremely cold temperatures prevail, minimum friction is necessary, high speeds are involved, excellent rust protection is required, or equipment is stored or used intermittently Consult owner s manual for proper lubricant selection. MYSTIK JT-6 LO-TEMP EXTREME GREASE Material Code NLGI Consistency Number 2 Thickener Type Anhydrous Calcium Texture Smooth Color Medium Amber Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 285 (140) Water Washout, ASTM D1264, % 175 F 5 Rust Prevention, ASTM D1743, rating Pass Oil Separation, ASTM D1742, % loss 5 Timken OK Load, ASTM D2509, lb 45 Four-Ball Wear, ASTM D2266, mm 0.56 Four-Ball Weld, ASTM D2596, kgf 315 US Steel 0 F, gpm 540 Low Temperature Torque, ASTM D4693, N-m 0.48 Approximate Temperature Range, F ( C) -40 to 250 (-40 to 121 ) Base Oil Viscosity: 40 C, cst 20 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20028 Greases 46

52 MYSTIK JT-6 MULTI-PURPOSE GREASE Date 05/18 Mystik JT-6 Multi-Purpose Grease is an exceptionally water resistant product. It is light colored, low staining, and has a very low oil separation rate. Mystik JT-6 Multi-Purpose Grease provides excellent antiseize protection under high loads. Outstanding adhesion enables this product to stay in place better than most other greases. This product is a medium temperature range multi-purpose grease for extreme pressure loads and slow to medium speed bearings. It is excellent for greased chassis points, fifth wheels, and water pumps. It works especially well where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, and excellent rust protection is desired. It is fully rust and oxidation inhibited. Mystik JT-6 Multi-Purpose is also available in an aerosol form. This product penetrates hard-to-reach points to leave a protective coating of grease. Mystik JT-6 Multi-Purpose Spray Grease has the ability to stay in place and lubricate, even under extreme pressures and severe service. It resists rust, corrosion, oxidation, and wear. This product is ideal for hard to reach points and precise placement. Mystik JT-6 Multi-Purpose Spray Grease dries into a non-fluid consistency in about 15 minutes. FEATURES: Exceptionally water resistant - protects against corrosion Light colored and low staining Very low oil separation rate Provides anti-wear and extreme pressure protection Excellent adhesion permits it to have better stay-ability than most other greases APPLICATIONS: A medium temperature range multi-purpose grease for extreme pressure loads, slow to medium speed bearings, greased chassis points, fifth wheels, and water pumps Especially good where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, or where excellent rust protection is desired Aerosol is excellent for hard to reach locations DANGER: Extremely flammable aerosol. Please refer to SDS for proper transport, storage and handling. Always check with local jurisdictions for warehouse requirements. Refer to equipment owner s manual for proper lubricant recommendation. NOTE: Because this product has better adhesion, it is a little more difficult to pump than less adhesive greases. Use of a follower plate is recommended where air driven pumps are used. (Continued) Greases M

53 MYSTIK JT-6 MULTI-PURPOSE GREASE Date (Continued) 05/18 - (Continued) MYSTIK JT-6 MULTI-PURPOSE GREASE AEROSOL (Grease) Material Code NLGI Consistency Number 2 2 Thickener Type Anhydrous Calcium Anhydrous Calcium Texture Smooth, Adhesive Smooth, Adhesive Color Medium Amber Medium Amber Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 290 (143) 290 (143) Water Washout, ASTM D1264, % loss at 100 F Rust Prevention, ASTM D1743, rating Pass Pass Oil Separation, ASTM D1742, % loss < 1 < 1 Timken OK Load, ASTM D2509, lb Four-Ball Wear, ASTM D2266, mm Four-Ball EP Weld Point, ASTM D2596, kgf Four-Ball Last Non-Seizure Load, ASTM D2596, kgf Approximate Application Temperature Range, F ( C) 0 to 250 (-18 to 121) 0 to 250 (-18 to 121) Base Oil Viscosity: 40 C, cst 1080 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20027 Greases 48

54 MYSTIK JT-6 SUPER HEAVY DUTY 460 GREASE Date 05/18 FEATURES: APPLICATIONS: Mystik JT-6 Super Heavy Duty 460 Grease is an extended service capable, extreme pressure (EP) lubricating grease designed for a wide variety of heavy duty industrial, on highway and off highway equipment applications, especially pins, bushings and anti-friction bearings. Provides extra wear protection when operating with higher loads resulting in longer equipment component life. It is highly recommended for heavily loaded plain and anti-friction bearings such as those found in steel, paper, and cement industries. Mystik JT-6 Super Heavy Duty 460 Grease is lithium complex thickened grease formulated with a premium additive system and a combination of synthetic and conventional base oils. The optimized formula provides superior performance properties over a wide operating temperature range. Proprietary adhesive, stay-in-place formula helps seal out contaminants and extend lubrication intervals High load-carrying capacity offers wear protection even under severely loaded conditions Enhanced water and corrosion resistance protects equipment under adverse conditions including saltwater spray and exposure to corrosive anti-icing agents Wide operating range of 5 to 350 F for a variety of weather conditions and application temperatures Mystik JT-6 Super Heavy Duty 460 offers superior protection in a variety of applications where enhanced load carrying capability, water resistance, and anti-corrosion protection properties are required such as: Heavy Duty and Extreme Heavy Haul Trucking 5th wheels, U-joints, kingpins, steering drag links, shackle pins, pivots and cross shaft spring pins Mining and Construction - bulldozers, scrapers, backhoes, excavators, compactors, cranes, paving machinery, articulated vehicles, soil compactors, graders, ditch hoes, loaders Pit and Quarry Equipment rock crushers, conveyors, rock drills, bridge cranes, water tender, log trucks, chip van trucks Agriculture tractors, implements, tillage, planting and seeding machinery, sprayers and spreaders, hay balers, harvesting machinery, combines, mowers, skid steers Heavy Industry heavily loaded plain and anti-friction bearings in cement, paper, metal (steel, aluminum, copper) industries Forestry and Logging harvester-processor, feller-buncher, mulcher-masticator, brush cutter, shovel logger, skidder, brush piling shovel, brush rake, yarder, log landing machines, shovel, stroke delimber, loader, grinder, chipper, debarker, forest road machines Mystik JT-6 Super Heavy Duty 460 helps increase equipment life through superior performance including higher load capacity, capable of carrying up to 3X more load than conventional greases. Consult owner s manual for proper lubricant selection. Mystik JT-6 Super Heavy Duty Conventional Grease 3X Performance Greases Four Ball Weld kgf ASTM D-2596 M20098 (Continued) 49

55 MYSTIK JT-6 SUPER HEAVY DUTY 460 GREASE (Continued) Date 05/18 - (Continued) MYSTIK JT-6 SUPER HEAVY DUTY 460 GREASE ISO Viscosity Grade 460 Material Code NLGI Consistency Number 2 Thickener Type Lithium Complex Texture Smooth Color, Observed Magenta Worked Penetration, ASTM D Dropping Point, ASTM D2265 F ( C) 500 (260) Rust Prevention, ASTM D1743, rating Pass 5% Synthetic Sea Water Corrosion Pass Water Washout, ASTM D1264, % Loss 2.3 Water Spray Off, ASTM D4049, % Loss 9.4 US Steel 0 F, gpm 38 Four-Ball Weld, ASTM D2596, kgf 800 Base Oil Viscosity: 40 C, cst 460 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20098 Greases 50

56 MYSTIK JT-6 SYNTHETIC BLEND GREASE Date 05/18 FEATURES: APPLICATIONS: Mystik JT-6 Synthetic Blend Grease is a premium quality, multi-purpose, high temperature, lithium complex EP grease with excellent low temperature properties. A unique blend of petroleum base oils and synthetic fluids gives this grease excellent resistance to oxidation at elevated temperatures and exceptionally low start-up resistance (torque) under extreme low temperature conditions. Engineered to protect under severe operating conditions, Mystik JT-6 Synthetic Blend Grease contains EP/antiwear, rust, and oxidation inhibitor additives to provide superior protection for a wide range of applications and service conditions. Mystik JT-6 Synthetic Blend Grease is categorized as an excellent high/low temperature multi-purpose grease due to its ability to lubricate over a very broad temperature range in a wide variety of automotive, agricultural, industrial applications. It meets the highest performance categories of ASTM D 4950 Automotive Grease Classification System, GC for wheel bearing service and LB for chassis service. A premium quality, multi-purpose, high temperature, lithium complex EP grease with excellent low temperature properties Fully additive treated. EP/antiwear, rust and oxidation inhibited Excellent oxidation and corrosion resistance Superior antiwear protection Excellent oil bleed characteristics Exceptionally low start-up resistance (torque) under low temperature conditions A unique blend of petroleum base oils and synthetic fluids in an optimized formulation that provides excellent low temperature, high temperature, and seal compatibility performance Certified by the NLGI for ASTM Service Classification GC-LB (ASTM D 4950) for use as a dual-service grease for wheel bearing and chassis applications Engineered for the lubrication and surface corrosion protection of vehicles and equipment operated over the temperature range of -27 to 325 F (-33 to 163 C) Excellent for high speed bearing applications Superior protection to lubricate a wide variety of automotive, agricultural and industrial equipment Provides excellent performance in severe low temperature applications Consult owner s manual for proper lubricant selection. CLASSIFICATION: AUTOMOTIVE WHEEL BEARING & CHASSIS LUBRICANT GC-LB Greases (Continued) M

57 MYSTIK JT-6 SYNTHETIC BLEND GREASE (Continued) Date 05/18 - (Continued) MYSTIK JT-6 SYNTHETIC BLEND GREASE Material Code NLGI Consistency Number 2 Thickener Type Lithium Complex Texture Smooth, Buttery Color, Observed Blue Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C) 500 (260) Water Washout, ASTM D1264, % loss at 100 F 1.4 Rust Prevention, ASTM D1743, rating Pass Copper Corrosion, ASTM D4048, rating 1a Timken OK Load, ASTM D2509, lb. 65 Four-Ball Wear, ASTM D2266, mm 0.45 Four-Ball Weld, ASTM D2596, kgf 315 NLGI Certified, ASTM D4950 GC-LB Base Oil Viscosity: 40 C, cst 70 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20030 Greases 52

58 MYSTIK MOLY GREASE Date 05/18 FEATURES: Mystik Moly Grease is a premium quality, multi-functional, extreme pressure, lithium complex grease that combines the high temperature function of the thickener with molybdenum disulfide (moly) and graphite to provide extended extreme pressure and high temperature performance. This product provides equivalent performance to many 3% moly greases for extreme conditions found in mining, construction, and severe industrial applications. Mystik Moly Grease is recommended for all bearing and sliding applications including shock, high loading and pound applications. This grease covers a wide range of applications including those found in off-road construction (bucket pins, bucket loaders, backhoes, articulated trucks, etc.), heavy duty fleets (fifth wheels, king pins, slack adjusters, pins and bushings), mining equipment (above and below ground bucket loaders, etc.) and industrial bearings. Not recommended for high speed lightly loaded bearings such as those found in electric motors. Consult owner s manual for proper lubricant selection. MYSTIK MOLY GREASE Material Code NLGI Consistency Number 2.5 Thickener Type Lithium Complex Texture Smooth, Adhesive Color Black Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C), min 500 (260) Molybdenum Disulfide, m% 1.5 Graphite, m% 1.5 Rust Prevention, ASTM D1743, rating Pass Copper Corrosion, D4048, rating 1b Oxidation Stability, ASTM D942, psi drop 3 Timken OK Load, ASTM D2509, lb 60 Four-Ball Weld, ASTM D2596, kgf 400 Four-Ball Wear, ASTM D2266, mm 0.54 Water Washout, ASTM D1264, % 175 F 2.5 USS Mobility, 20 F, gpm USS Mobility, 0 F, gpm 64.2 Base Oil Viscosity: 40 C, cst 210 Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. Greases M

59 MYSTIK OG-5 OUTSIDE GEAR GREASE Date 05/18 FEATURES: APPLICATIONS: Mystik OG-5 Outside Gear Grease is a premium high-performance open-gear lubricant that provides exceptional protection of heavily loaded open-gears exposed to a wide range of operating conditions. It provides exceptional extreme pressure and anti-wear protection, with excellent water resistance, and operates over a wide range of operating temperatures. Tough film strength protects against wear in the contact zone which helps to provide longer life for protected parts and reduces maintenance associated from damaged surfaces. Unique formula meets the challenges of lubricating a wide range of exposed gears operating in extremely challenging environments Provides exceptional extreme pressure and anti-wear resistance Very adhesive and tacky grease that clings to metal surfaces providing stay-in-place performance, water resistance, and provides protection against corrosion Protects mating surfaces against damaging wear which helps to extend component life. Solvent Free Engineered to provide a wide operating temperature range Suitable for use in mills, shovels, draglines ring and pinion gears Other applications include marine, guide rails, fifth wheels, slideways, swing gears, conveyor equipment, winch trucks, track rollers, drive rollers, chains, flanges and many other types of open or outside gearing found in construction and plant machinery Can be applied by gun, brush, swab, pump, etc. Consult owner s manual for proper lubricant selection. Refer to SDS for special handling instructions. WARNING: Avoid contact with eyes, skin and clothing. IF IN EYES: Rinse cautiously with water for several minutes. NOTE: Not for rolling element bearings. May be difficult to apply where temperatures are below 32 F. MYSTIK OG-5 OUTSIDE GEAR GREASE Material Code NLGI Consistency Number 1-1/2 Thickener Type Lithium Stearate Soap Texture Smooth, Stringy Fillers Moly Disulfide & Graphite Color Black/Dark Brown Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 300 (149) Rust Prevention, ASTM D1743, rating Pass Timken OK Load, ASTM D2509, lb. 45 Four-Ball Load Wear Index, ASTM D Four-Ball Weld, ASTM D2596, kgf 500 Base Oil Viscosity: 40 C, cst 1570 Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M20029 Greases 54

60 MYSTIK RED LITHIUM C Date 05/18 Mystik Red Lithium C is a high quality multi-purpose grease fortified with additive systems to provide anti-rust, oxidation resistance, and antiwear performance. FEATURES: Antirust, antioxidant, and antiwear protection Water resistant APPLICATIONS: A good quality multipurpose grease Intended for use in general purpose applications where normal conditions prevail Consult owner s manual for proper lubricant selection. MYSTIK RED LITHIUM C Material Code NLGI Consistency Number 2 Thickener Type Lithium Stearate Texture Smooth, Medium Fiber Color Red Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 340 (171) Oil Separation, ASTM D1742, % loss 2.5 Approximate Application Temperature Range, F ( C) -5 to 280 (-21 to 138) Base Oil Viscosity: 40 C, cst 150 Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. Greases M

61 MYSTIK ANTI-LEAK INDUSTRIAL OIL Date 05/18 A Versatile and Widely Varied Purpose Lubricant Mystik Anti-Leak Industrial Oil is a very wide temperature range, multiple viscosity grade oil specially treated for maximum leakage resistance. Fortified with antiwear, antifoam, antirust, and antioxidant stabilizer additives for long life. It has a special antisplatter additive for splash resistance and a slower drip off rate. While primarily used as a combination replacement for individual ISO 46, 68, and 100 grade hydraulic fluids, this product can also be used as a medium viscosity way oil, a winter grade rock drill oil, a non-drip general purpose shop oil, and as a circulating oil for gears and bearings. Hydraulic Fluids FEATURES: A very wide temperature range, multiple viscosity grade oil, specially treated for leakage resistance. Fortified with antiwear, antifoam, antirust, and antioxidant stabilizer additives for long life. Has a special antisplatter additive for splash resistance and a slower drip off rate. While primarily used as a combination replacement for individual grade hydraulic fluids, this product is also being used as a medium viscosity way oil, a winter rock drill oil, a non-drip general purpose shop oil, and as a circulating oil for gears and bearings. CLASSIFICATION: NSF H-2 - Lubricants with no food contact (Definition) These compounds may be used as a lubricant, release agent, or antitrust film on equipment and machine parts or in closed systems (e.g., hudraulic systems) in locations in which there is no possibility of the lubricant or lubricated part contacting edible products. MYSTIK ANTI-LEAK INDUSTRIAL OIL Material Code ISO Grade 100 (Recommended for 46, 68, 100) SAE Grade 15W-40 Gravity, API ASTM D Density, 60 F 7.29 Viscosity ASTM D445 at 40 C, cst 92.7 at 100 C, cst 12.9 Viscosity Index ASTM D Flash Point, COC, F ( C) ASTM D (204) Pour Point, F ( C) ASTM D97-30 (-34) Appearance, Color Aqua Blue Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

62 Hydraulic Fluids MYSTIK AW HYDRAULIC OILS Date 05/18 Mystik AW Hydraulic Oils offer excellent antiwear protection with rust, oxidation, and foam inhibitors in high quality, fully refined base stocks with good oxidation stability. They meet pump performance requirements of major manufacturers like Denison and Eaton. FEATURES: Rust, oxidation, antiwear protection, and foam resistance. Blended from high quality, fully refined base oils. Mystik AW Hydraulic Oils meet or exceed: ASTM D 6158 HM (2005) General Motors LS-2 (1997) Fives Cincinnatti P-68, 69, 70 JCMAS HK P041 (2004) Parker Denison HF-0 (Revision J) ISO HM (FDIS 2008) DIN (2006) SEB (2007) Eaton Brochure US Steel 126, 127, 136 APPLICATIONS: High and low pressure hydraulic systems where additive-treated product is required. Vane, piston, and gear pumps. Bearings, gears, and pumps which require an R&O or R&O/AW hydraulic oil. MYSTIK AW HYDRAULIC OILS Material Code ISO Viscosity Grade API Gravity at 60 F ASTM D Pounds/Galon at 60 F Specific Gravity at 60 F ASTM D Viscosity ASTM D445 at 40 C, cst at 100 C, cst Viscosity Index ASTM D Flash Point, COC, F ( C) ASTM D (204) 415 (213) 425 (218) 465 (241) Pour Point, F ( C) ASTM D97-40 (-40) -27 (-33) -22 (-30) -17 (-27) Color, ASTM D1500 L Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

63 MYSTIK AW/AL HYDRAULIC OILS Date 05/18 Premium quality antiwear, antileak, and antifoam hydraulic oils formulated for use in modern high and low pressure industrial and mobile hydraulic systems. They meet the toughest requirements of most manufacturers and are dyed green for ease of identification from other petroleum products. They have 100% paraffinic high VI base oils with low pour points for wide temperature range applicability and additionally are treated with antioxidant stabilizers for long life and an antirust protective additive. A fully synthetic seal swell agent prevents and stops minor leaks and provides longer seal life. They may also be used as API GL-1 gear lubricants where their viscosity is suitable. They have a variety of applications where general purpose non-detergent type oils or rust and oxidation (R&O) inhibited oils are applicable. The High Viscosity Index (HVI) products offer wide temperature application and have a typical dielectric strength of 35kV which makes them suitable for use as non conductive hydraulic fluids. HVI-32 meets FMC Corporation recommendations for a high viscosity index hydraulic fluid. Hydraulic Fluids FEATURES: Mystik AW/AL Hydraulic Oils meet or exceed: ASTM D 6158 HM (2005) General Motors LS-2 (1997) Fives Cincinnati P-68, 69, 70 JMCAS HK P041(2004) Parker Denison HF-0 (Revision J) ISO HM (FDIS 2008) DIN (2006) SEB (2007) Eaton Brochure US Steel Premium quality antiwear, antileak, and antifoam hydraulic oils High viscosity indexes and low pour points for wide temperature usage Excellent oxidation resistance and thermal stability Manufactured from high quality, solvent refined paraffinic base stocks Good water separation characteristics Outstanding rust and corrosion inhibition for enhanced service life Dyed green for ease of identification Highly recommended for: bearings and gears which require an R&O or R&O/AW hydraulic oil. hydraulic circuit components (valves, motors, servos, pumps, etc.) applications where general non-detergent type oils are applicable vacuum pumps non conductive hydraulic fluid NOTE: HVI-32 and HVI-68 are guaranteed to have a dielectric strength of no less than 28 kv when packaged. Dielectric strength is extremely sensitive to humidity and contamination. Once the containers are opened, the dielectric strength cannot be expected to remain at its original value. Containers should be kept tightly sealed and stored in a dry environment. (Continued) M

64 Hydraulic Fluids MYSTIK AW/AL HYDRAULIC OILS Date (Continued) 05/18 - (Continued) MYSTIK AW/AL HYDRAULIC OILS Material Code Designation HVI-32 HVI-68 ISO Viscosity Grade Gravity, API ASTM D Density, lb/gal at 60 F Specific 60 F ASTM D Brookfield Viscosity ASTM D2983 at -18 C, cp at C, cp 1,925 9,100 at -35 C, cp 16,700 Viscosity ASTM D445 at 40 C, cst at 100 C, cst Viscosity Index ASTM D Appearance, Color Green Green Green Green Green Green Flash Point, COC, F ( C) ASTM D (224) 435 (224) 468 (242) 471 (244) 417 (214) 453 (234) Pour Point, F ( C) ASTM D97-22 (-30) -22 (-30) -11 (-24) +5 (-15) -33 (-36) -27 (-33) Neutralization Number (TAN) ASTM D Rust Test, ASTM D665 A - Distilled Water Pass Pass Pass Pass Pass Pass B - Synthetic Sea Water Pass Pass Pass Pass Pass Pass Foam Test, ASTM D892, Sequence I, II, III Pass Pass Pass Pass Pass Pass Oxidation Test, hrs. ASTM D943 5,300 5,200 4,000 3,600 4,200+ 3,500+ Meets Denison HF-0 Requirements Yes Yes Yes Yes Yes Yes Meets Eaton Brochure Yes Yes Yes Yes Yes Yes Dielectric Strength, kv Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

65 MYSTIK HYDRAULIC JACK OIL Date 06/18 Mystik Hydraulic Jack Oil is a low viscosity fluid providing extra low friction in hand or foot operated hydraulic systems. Hydraulic Fluids FEATURES: Treated with antirust, antiwear, antioxidant, and antifoam additives Low viscosity reduces pumping effort required and allows jack to close rapidly and completely when released Provides rust, wear, and oxidation protection and foam resistance. Contains low wax content, low aniline point oils to give seal swell and softening to retard leakage and provide a naturally low pour point. May be used at sub-zero temperatures in motorized hydraulic systems Can also serve as a high speed spindle oil and as a low temperature lubricant Easy to use package with pour spout MYSTIK HYDRAULIC JACK OIL Material Code ISO Grade (Approx.) 22 Gravity, 60 F ASTM D Density, lb/gal at 60 F 7.53 Specific Gravity at 60 F ASTM D Viscosity ASTM D445 at 40 C, cst 21.5 at 100 C, cst 3.8 Viscosity Index ASTM D Flash Point, COC, F ( C) ASTM D (157) Pour Point, F ( C) ASTM D97-50 (-46) Color Red Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

66 MYSTIK TERRA 340 GAS ENGINE OILS Industrial Gas Engine Oils Date 04/18 FEATURES: Low Ash Gas Engine Oils Mystik Terra 340 Gas Engine Oils are high quality lubricants compounded with a low ash detergent and an ashless dispersant, as well as oxidation and corrosion inhibitors. They are specially formulated for four-cycle naturally aspirated and turbocharged natural gas/lpg fueled engines. Use where low ash oils are permitted in low, medium, or high speed four-cycle engines. Recommended for use in high-speed four-cycle industrial engines such as Caterpillar, Cummins, Dresser-Rand (Ingersoll- Rand) Category I and II, Superior, Waukesha and Worthington. Not recommended for LPG or CNG conversions in automotive service. Low ash detergent and ashless dispersant formulation provides excellent deposit control for ports, spark plugs and combustion chambers Inhibited against rust, corrosion, oxidation, nitration, and wear Contains no bright stock which can cause carbon buildup in combustion chambers and engine ports Superior antiwear protection for piston rings and cylinder liners Low phosphorus chemistry for catalyst compatibility MYSTIK TERRA 340 GAS ENGINE OILS Material Code SAE Grade 30 15W-40 Gravity, ASTM D4052, API Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosities: at 40 C, cst at 100 C, cst Viscosity Index Flash Point, ASTM D92, COC, F ( C) 466 (241) 439 (226) Pour Point, ASTM D97, F ( C) -38 (-39) -38 (-39) Color, ASTM D1500 L4.5 L5.0 Sulfated Ash, wt % Total Base Number, ASTM D2896, mg KOH/g Total Acid Number, ASTM D664, mg KOH/g Mystik and Terra are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

67 MYSTIK TERRA 500 GAS ENGINE OIL SAE 15W-50 Date 4/18 FEATURES: Low Ash Gas Engine Oil Mystik Terra 500 Gas Engine Oil SAE 15W-50 is a premium quality lubricant compounded with a low ash detergent and an ashless dispersant, as well as oxidation and corrosion inhibitors. It is specially formulated for four-cycle naturally aspirated and turbocharged natural gas/lpg fueled engines where an SAE 15W-50 viscosity grade is suitable for use. Use where low ash oils are permitted in low, medium, or high speed four-cycle engines. Recommended for use in high-speed, four-cycle industrial engines such as Caterpillar, Fairbanks-Morse, Superior, and Waukesha. Not recommended for LPG or CNG conversions in automotive service. Excellent oxidation and nitration inhibition for protection against oil thickening and outstanding viscosity control Superior antiwear protection High flash point from low volatility base stocks High viscosity index and low pour point for year-round performance Low ash technology Suitable for use with catalytic converters Industrial Gas Engine Oils MYSTIK TERRA 500 GAS ENGINE OIL SAE 15W-50 Material Code SAE Grade 15W-50 Gravity, ASTM D4052, API 30.7 Pounds/Gallon at 60 F 7.26 Specific Gravity at 60 F at 40 C, cst 131 at 100 C, cst 17.5 Viscosity Index 148 Flash Point, ASTM D92, COC, F ( C) 424 (218) Pour Point, ASTM D97, F ( C) -38 (-39) Color, ASTM D1500 L5.0 Sulfated Ash, ASTM D872, wt % 0.45 Total Base Number, ASTM D2896, mg KOH/g 5.7 Total Acid Number, ASTM D664, mg KOH/g 1.4 Mystik and Terra are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

68 MYSTIK TERRA FREE ASHLESS GAS ENGINE OILS Date 04/18 Industrial Gas Engine Oils FEATURES: Mystik Terra Free Ashless Gas Engine Oils are premium quality lubricants compounded with a detergent and a dispersant, as well as oxidation and corrosion inhibitors. They are specially formulated for two- and four-cycle naturally aspirated and turbocharged natural gas/lpg fueled engines. Use where very low ash or ashless oils are permitted in low- to medium-speed, two- and four-cycle engines such as Ajax, Clark, Cooper-Bessemer and Dresser-Rand (Ingersoll-Rand) Category I and II generally used in gas gathering operations. An excellent choice for catalytic converter equipped engines. Not recommended for LPG or CNG conversions in automotive service. Specially formulated ashless stationary natural gas engine oils with an ashless dispersant provide excellent deposit control for ports, pistons, spark plugs and combustion chambers Ashless dispersant provides superior control of oil thickening Excellent oxidation and nitration inhibition for protection against oil thickening and outstanding viscosity control Superior antiwear, scuffing and corrosion protection High flash point from low volatility base stocks with low carbon-forming tendencies High viscosity index and low pour point for year-round performance Superior ashless technology Contains no bright stock which can cause carbon build up in combustion chambers and engine ports APPLICATIONS: Highly recommended for all natural gas and propane powered engines which specify an ashless engine oil. MYSTIK TERRA FREE ASHLESS GAS ENGINE OILS Material Code SAE Grade W-40 Gravity, ASTM D4052, API Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosities: at 40 C, cst at 100 C, cst Viscosity Index Flash Point, ASTM D92, COC, F ( C) 496 (258) 504 (262) 457 (236) Pour Point, ASTM D97, F ( C) -33 (-36) -11 (-24) -38 (-39) Color, ASTM D1500 L1.0 L1.0 L1.0 Sulfated Ash, ASTM D872, wt % Total Base Number, ASTM D2896, mg KOH/g Total Acid Number, ASTM D664, mg KOH/g Mystik and Terra are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

69 MYSTIK TERRASYN TM IRRIGATION ENGINE OIL Date 06/18 Mystik TerraSyn Irrigation Engine Oil is an SAE 15W-40 synthetic stationary natural gas engine oil. It is specially formulated to provide lubrication in engines that have been converted to natural gas fuel, such as those in LP and agricultural irrigation pump service. Designed for added engine valve train anti-wear protection. Mystik TerraSyn Irrigation Engine Oil provides: Improved engine top end start up lubrication, especially in colder environments Enhanced valve train protection compared to conventional stationary natural gas engine oils Excellent extended drain capability, providing user savings in downtime, work man-hours and oil usage MYSTIK TERRASYN TM IRRIGATION ENGINE OIL Industrial Gas Engine Oils Material Code SAE Grade 15W-40 Gravity, ASTM D4052, API 31.6 Density, lbs/gal 7.22 Flash Point, ASTM D92 (COC), F ( C) 489 (254) Viscosity, ASTM D445, cst at 40 C 107 cst at 100 C 15.1 Viscosity Index, ASTM D CCS Viscosity, ASTM D5293, cp -20C 5,340-25C 9,300 MRV Viscosity, ASTM D4684, cp -25C 10,700 Pour Point, ASTM D97, F ( C) -60 (-51) Color, ASTM D Sulfated Ash, ASTM D874, m% 0.45 TBN, ASTM D Zinc, ppm 900 Mystik is a registered trademark and TerraSyn is a trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

70 MYSTIK BAR AND CHAIN LUBRICANT Date 05/18 Mystik Bar and Chain Lubricant is a great choice for loggers as well as home and ranch users. It utilizes special components to reduce wear, guard against rust and enhance metal adhesion to reduce spatter. Designed for use over a wide temperature range. For use in all brands of chain saws. FEATURES: Lubricates and Cools Chain Polymer Controls Spatter Guards Against Rust Provides Wear Protection NOTE: NOT FOR USE IN ENGINES! Use Mystik JT-4 2-Cycle Lawn and Garden Engine Oil, Material Code , where 2-cycle engine oil is specified. Functional Products MYSTIK BAR AND CHAIN LUBRICANT Material Code SAE Grade 30 ISO Viscosity Grade 100 Gravity, API ASTM D F 7.3 Flash Point, COC, F ( C) ASTM D (171) Pour Point, F ( C) ASTM D97-23 (-10) Viscosity ASTM D445 cst at 40 C 82 cst at 100 C, 10 Appearance, Color Blue-Green Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

71 MYSTIK ROCK DRILL OIL 150 Date 05/18 Heavy Duty Pneumatic Tools Oil Mystik Rock Drill Oil 150 is formulated to provide excellent extreme pressure (EP) and anti-wear performance in heavy duty pneumatic tools. FEATURES: Mystik Rock Drill Oil 150 provides: Excellent EP and anti-wear performance Emulsification properties for extra lubricity in moist or wet conditions Tackiness to reduce splatter and non drip properties APPLICATIONS: Recommended for rock drills, jack hammers and other pneumatic tools requiring premium performance lubrication. Can also be used in industrial slideway (way oil) or non-drip oil applications. Consult owner s manual for proper lubricant selection. MYSTIK ROCK DRILL OIL 150 Material Code ISO Viscosity Grade 150 SAE Viscosity Grade (Approx.) 40 Gravity, API ASTM D Density, 60 F 7.34 Flash Point, COC, F ( C) ASTM D (246) Pour Point, F ( C) ASTM D97 5 (-15) Viscosity ASTM D445 cst. at 40 C 146 cst. at 100 C 15.5 SUS at 100 F 764 SUS at 210 F Viscosity Index ASTM D Color, ASTM D Timken OK Load, lbs. ASTM D2782 >65 Falex Load, lbs. ASTM D3233 >2000 Functional Products Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

72 MYSTIK TUFF-TORQ EG Date 05/18 Tool Joint Compound An Environmentally Conscious Product Mystik Tuff-Torq EG is a modern highly advanced formula, field and performance proven, highpressure tool joint compound. It utilizes a proprietary non-metallic additive system that provides an environmental alternative which rivals the performance of API thread compounds containing detrimental metal compounds such as lead, zinc or antimony without compromising performance. Customers report that this product has been field-proven to provide superior lubricity and blowout prevention in wells drilled to depths of 12,000 feet. Mystik Lubricants Tuff-Torq EG can be used as a drill collar compound, storage compound or production tube sealer with excellent results. FEATURES: Mystik Tuff-Torq EG utilizes an additized lithium stearate thickener which provides improved thread adhesion and exceptional sealing properties. The special compounding includes a leak preventer that reduces leaks and washout. It applies easily over a range of temperatures and conditions. It is resistant to washout and will not harden or bleed excessively in storage. The Break Out Ratio performance of Mystik Tuff-Torq EG rivals that of other thread compounds that contain 60% lead. Functional Products APPLICATIONS: Formulated with a proprietary non-metallic additive system; does not contain metallic zinc, lead, or copper additives. Provides exceptional anti-weld performance. An environmentally conscious product that has been formulated to provide a superior level of performance while imparting minimal environmental impact. Storage compound for pipe yards Drill collar compound Production tube thread compound Raise Bore Drilling DI-22 Rotary Shouldered Connections Tuff-Torg EG New Competitor A Reverse Bore Head BOR on MTI 315 Pipetik Drill Stem Pipe Thread (Continued) M

73 MYSTIK TUFF-TORQ EG (Continued) Date 05/18 - (Continued) MYSTIK TUFF-TORQ EG Material Code NLGI Consistency Grade 1 Thickener Type Lithium Stearate Texture Coarse/Granular Color Dark Brown Specific Gravity at 77 F 1.12 Unworked Penetration, ASTM D Dropping Point, F ( C) ASTM D (143) Brushability, F ( C) To 40 (4.4) Four-Ball Wear, mm D Four-Ball EP Load Wear Index ASTM D Four-Ball EP Weld Point, kgf ASTM D Mystik and Tuff-Torq EG are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Functional Products M

74 MYSTIK TURBINE DRIP OIL Date 05/18 FEATURES: Mystik Turbine Drip Oil is formulated with highly refined lubricating base oils and inhibited with a foam suppressant. It is for use in dripper lubrication systems for irrigation water well line shaft bearings where a food grade registered product is NOT required. NOTE: This lubricant is not recommended for use where a food grade quality lubricant is required. This product should not be used for potable water well pump lubrication. It is the user s responsibility to ensure proper selection of lubricating oil for agricultural irrigation and related systems; refer to applicable regulatory agency requirements. MYSTIK TURBINE DRIP OIL Material Code Functional Products SAE Grade 10W ISO Grade 32 Gravity, API ASTM D Density, lb/gal at 60 F 7.54 Specific 60 FASTM D Viscosity, -25 C, cp ASTM D Viscosity ASTM D445 at 40 C, cst 29.3 at 100 C, cst 5.0 at 100 F, cst (SUS) 150 at 210 F, cst (SUS) 42.4 Viscosity Index ASTM D Flash Point, COC, F ( C) ASTM D (193) Pour Point, F ( C) ASTM D97-25 (-32) Color, ASTM D Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

75 MYSTIK VISCIDLUBE OIL TREATMENT Date 05/18 Mystik ViscidLube Oil Treatment is a special polymer-rich treatment. May be added to crankcase of warm, running engine, using 8-16 ozs. of Mystik ViscidLube to 4 quarts of motor oil to help reduce oil consumption problems. DO NOT OVERFILL CRANKCASE. Builds high temperature viscosity with small effect on low temperature fluidity. Contains an effective anti-wear and anti-oxidant additive system. Compatible with conventional and synthetic based motor oils for gasoline and diesel engines. Mystik ViscidLube has excellent adherence to metal. Use neat or mixed with 50% motor oil in engine repair and assembly as a pre-lubricant to protect critical parts and help with parts positioning. FEATURES: Excellent pre-assembly lube Increases oil pressure; retards oil leakage and oil consumption Raises viscosity at high temperatures with minimal effect on low temperature fluidity and cold weather start-up Exhibits good shear stability (resistance to viscosity loss in service) Provides additional antiwear and antioxidation protection to prevent wear and deposits on cams, lifters, pistons, rings, and bearing Consult owner s manual for proper lubricant requirements. MYSTIK VISCIDLUBE OIL TREATMENT Material Code Functional Products Gravity, API ASTM D Density, 60 F 7.21 Specific 60 F ASTM D Viscosity ASTM D445 at 40 C, cst 9757 at 100 C, cst 805 Viscosity Index ASTM D Flash Point, COC, F ( C) ASTM D (177) Pour Point, F ( C) ASTM D97 0 (-18) Color, ASTM D Mystik and ViscidLube are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

76 MYSTIK NON-DETERGENT GENERAL PURPOSE OILS Date 05/18 Mystik Non-Detergent General Purpose Oils are designed for use in non-critical applications where a general purpose oil is desired. This includes low pressure hydraulic systems such as hydraulic jacks and air compressors requiring a non-detergent type lubricant. They are available in SAE 10W, 20W- 20, and 30 viscosity grades. Mystik Non-Detergent General Purpose Oils are not recommended for use in gasoline or diesel engines. MYSTIK NON-DETERGENT GENERAL PURPOSE OILS Material Code Functional Products SAE Grade 10W 20W ISO Grade (Approx.) Density, lb/gal at 60 F (Approx.) Viscosities (Approx.): at 100 C, cst at 40 C, cst at 210 F, SUS at 100 F, SUS Viscosity Index Flash Point, ASTM D92, F ( C) 380 (193) 395 (202) 425 (218) Pour Point, ASTM D97, F ( C) -25 (-32) -10 (-23) -5 (-20) NOTE: Consult machinery operator s manual for proper viscosity grade. For gasoline or diesel engines, consider Mystik JT-8 engine oils. Mystik is a registered trademark of CITGO Petroleum Corporation. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M

77 MYSTIK AMMONIA COMPRESSOR OIL 68 Date 05/18 FEATURES: CLASSIFICATION: Mystik Ammonia Compressor Oil 68 is blended from high quality naphthenic base oils to meet the performance requirements of ammonia refrigeration compressors. This oil offers the stability and low temperature characteristics necessary for the proper lubrication of this type equipment. It will not wax out under the low temperature conditions typically encountered in these systems. Equipment lines and refrigerant control devices stay clear and system efficiency is not impaired. This oil is chemically and thermally stable under the conditions normally encountered in ammonia refrigeration systems. It satisfies the low temperature requirements of all but the most extreme low temperature applications. Blended with high-quality naphthenic base oils Low pour point to meet the low temperature conditions of ammonia compressors High flash point from low volatility base stocks to reduce vaporization at discharge temperatures and pressures Available in ISO Viscosity Grade 68 which is required by most ammonia compressor manufacturers NSF H-2 - Lubricants with no food contact (Definition) These compounds may be used as a lubricant, release agent, or antirust film on equipment and machine parts or in closed systems (e.g., hydraulic systems) in locations in which there is no possibility of the lubricant or lubricated part contacting edible products. MYSTIK AMMONIA COMPRESSOR OIL 68 Material Code ISO Viscosity Grade 68 Gravity, 60 F ASTM D F, lb/gal 7.61 Specific 60 F ASTM D Flash Point, COC, F ( C) ASTM D (193) Viscosity ASTM D445 cst at 40 C 64.1 cst at 100 C 7.3 cst (SUS) at 100 F 72.3 (335.5) cst (SUS) at 210 F 7.6 (51.0) Viscosity Index ASTM D Pour Point, F ( C) ASTM D97-40 (-40) Color, ASTM D Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Compressor Lubricants M

78 MYSTIK JT-8 PREMIUM GASOLINE MOTOR OILS Date 06/18 FEATURES: Mystik JT-8 Premium Gasoline Motor Oils, with their advanced, fuel efficient synthetic blends formula, exceed the latest warranty requirements of car manufacturers for gasoline engines and meet the latest API Performance and Resource Conserving ratings. The premium quality detergent/ dispersant formulation guards against sludge, reduces deposits and protects against rust, corrosion and wear. Mystik JT-8 Premium Gasoline Motor Oils provide optimum viscosity and thermal stability and are highly recommended for all carburetor-equipped or fuel-injected gasoline engines including turbocharged, supercharged and other high performance models. These products offer maximum protection against deposits and have superior durability. Even under severe service conditions you can have complete confidence that your engine oil is providing the fullest protection possible. The 5W-20, 5W30 and 10W-30 viscosity grades are recommended for applications calling for oils meeting ILSAC GF-5 and API SN Plus. All viscosity grades are licensed for API SN Plus and are backward compatible with prior service categories (SM, SL, SJ and SH). Special friction modifier provides increased fuel economy Multi-viscosity, thermally stable and durable formulation provides maximum year-round protection Consult owner s manual for fluid selection. MYSTIK JT-8 PREMIUM GASOLINE MOTOR OILS Material Code SAE Grade 5W-20 5W-30 10W-30 Gravity, ASTM D4052, API Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosities: at -25 C, cp Max 5,820 at -30 C, cp Max 6,170 5,360 at 40 C, cst at 100 C, cst Viscosity Index Flash Point, ASTM D92, COC, F ( C) 442 (228) 450 (232) 451 (233) Pour Point, ASTM D97, F ( C) -33 (-36) -38 (-39) -33 (-36) Color, ASTM D1500 L3.5 L3.5 L3.5 Mystik and JT-8 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

79 MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS Date 06/18 Mystik JT-8 Premium Gasoline Synthetic Motor Oils are well-balanced combinations of today s highest quality synthetic base stocks and contain an advanced additive system that meets stringent automotive specifications. They are designed to provide excellent protection in today s high performance gasoline (including turbocharged and supercharged) engines in passenger cars, vans, sport utility vehicles, and light trucks. These synthetic engine oils demonstrate improved performance in today s advanced engine designs, and are available in SAE 0W-20, 5W-20 and 5W-30 viscosity grades. Excellent low-temperature starting and pumpability characteristics High-temperature/high-shear properties well above conventional oils Lower volatility when compared to conventional oils Meets the most advanced emissions and fuel economy standards in the US gasoline engines Enhanced protection against varnish buildup and sludge formation in critical engine parts for top performance and long engine life Extended engine life due to control of wear and deposit formation Compatible with conventional and synthetic motor oils Mystik JT-8 Premium Gasoline Synthetic SAE 0W-20 Approved GM dexos1 Gen2 License D10392HG121 Mystik JT-8 Premium Gasoline Synthetic SAE 5W-20 Approved GM dexos1 Gen2 License D10744HL121 Mystik JT-8 Premium Gasoline Synthetic SAE 5W-30 Approved GM dexos1 Gen2 License D10372HF121 FEATURES: Mystik JT-8 Premium Gasoline Synthetic Motor Oils are recommended for passenger cars, sport utility vehicles and light trucks operating on gasoline. They are also recommended for use in gasoline engines which have been converted to operate on compressed natural gas (CNG), liquified natural gas (LNG), and liquified petroleum gas (LPG-which includes propane and butane). Consult the vehicle owners manual for proper engine lubricant selection. Mystik JT-8 Premium Gasoline Synthetic Motor Oils meet the performance requirements for the latest gasoline-fueled engine service ILSAC GF-5/Resource Conserving and API SN Plus and display the API Certification Mark and API Service Symbol. They have also demonstrated benefits in industry accepted fuel economy tests. Mystik JT-8 Premium Gasoline Synthetic 0W-20 Motor Oil meets the GM dexos1 Gen2 specification and is recommended for Original Equipment Manufacturers (OEM) such as Toyota and Honda for some hybrid vehicle applications and a limited number of low temperature applications. Mystik JT-8 Premium Gasoline Synthetic Motor Oil SAE 5W-30 meets the GM dexos1 Gen2 specification and provides excellent performance where GM4718M or GM6094M is referenced. Note: Mystik JT-8 Premium Gasoline Synthetic Motor Oils are not recommended for use in diesel engines in passenger cars, vans or light trucks. Mystik JT-8 SHD Motor Oils are recommended for diesel applications. (Continued) M20082 Agricultural Products 74

80 MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS (Continued) Date 06/18 - (Continued) MYSTIK JT-8 PREMIUM GASOLINE SYNTHETIC MOTOR OILS Material Code SAE Grade 0W-20 5W-20 5W-30 Gravity, ASTM D4052, API Pounds Per Gallon Flash Point, ASTM D92, F ( C), COC 220 (428) 442 (228) 450 (232) Low Temperature Cranking, ASTM D5293 Temperature, F ( C) -28 (-35) -22 (-30) -22 (-30) Viscosity, cp 5,190 5,270 4,080 Viscosity, ASTM D445, cst at 140 C Viscosity, ASTM D 445, cst at 100 C Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -33 (-36) -33 (-36) -27 (-33) Color, ASTM D1500 L3.5 L3.5 L3.5 ILSAC GF-5 Yes Yes Yes API SN Plus Yes Yes Yes Resource Conserving Yes Yes Yes GM dexos1 Gen2 Approved Yes Yes Yes Mystik and JT-8 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

81 MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 Date 06/18 Mystik JT-8 Synthetic Engine Oil, SAE 5W-40, full synthetic super heavy duty engine oil, engineered with proprietary additive technology, delivers an extra level of performance for both older and newer engines. The careful balance of synthetic components gives improved fuel economy, improved cold temperature performance and improved engine drain interval optimization capabilities. Mystik JT-8 Synthetic Engine Oil, SAE 5W-40 meets the API CK-4 requirements, which is an excellent choice for equipment owners who need maximum engine durability, fuel efficiency, extended oil service capability and superior cold weather start-up performance. FEATURES: Up to 3% fuel economy advantage over SAE 15W-40 viscosity grade oils Improves cold cranking, extending starter/battery life and reducing dependency on block heaters, saving energy Double the oil durability protection compared to conventional CJ-4 engine oils. Always follow OEM recommendations when extending oil drain intervals Superior lubrication in extreme temperature ranges compared to conventional SAE 15W-40 viscosity grade oils. RECOMMENDED FOR: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4 Caterpillar ECF-3 Cummins CES Detroit Diesel DFS 93K 222 Volvo/Mack/Renault VDS-4.5/EOS-4.5/RLD-4 Paccar Navistar Category Mystick JT-8 Synthtic Blend SHD 15W-40 API CJ-4 Mystick JT-8 10W-30 API CK-4 Mystick JT-8 15W-40 API CK-4 Mystick JT-8 5W-40 API CK-4 Back Serviceable Yes Yes Yes Yes Oxidation Stability Shear Stability Aeration Control Wear Control Fuel Efficiency Low Tempurature Start-up Compatible with API CJ-4 Oil Yes Yes Yes Yes (Continued) M20073 Agricultural Products 76

82 MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 (Continued) Date 06/18 - (Continued) MYSTIK JT-8 SYNTHETIC ENGINE OIL, SAE 5W-40 Material Code SAE Grade 5W-40 Gravity, ASTM D4052, API 34.0 Pounds Per Gallon 7.14 Flash Point, COC, ASTM D92, F ( C) 450 (232) Viscosity, ASTM D445, cst at 40 C 87 cst at 100 C 14 Viscosity Index, ASTM D CCS Vis, ASTM D5293, cp at C 6,260 at -30 C MRV Vis, ASTM D4684, cp at C 30,054 at -35 C MRV Yield Stress, ASTM D4684, Pa at C <35 Pour Point, ASTM D97, F ( C) -44 (-42) TBN (Total Base No.), ASTM D Color, ASTM D1500 L5.5 Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

83 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS MONOGRADES Date 06/18 APPLICATIONS: Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are recommended for hydraulic systems, transmissions and engines that recommend a Monograde engine oil type lubricant. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are formulated with premium base oils and additives to reduce wear and extend component life. Recommended for Service Category CF (obsolete) Recommended for Service Category CF-2 (obsolete) Hydraulic systems where engine oils are recommended MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS MONOGRADES Material Code SAE Grade 10W Gravity, ASTM D4052, API Density, lbs/gal Specifc Gravity at 60F Flash Point, ASTM D92 (COC), F ( C) Viscosity, ASTM D445, cst at 40 C cst at 100 C Viscosity Index, ASTM D CCS Viscosity, ASTM D5293, cp 3900 at -25C NR NR NR MRV Pumpability, ASTM D4684, cp 9180 at -30C NR NR NR MRV Yield Stress at -25 C, ASTM D4684 <35 at -30C NR NR NR Pour Point, ASTM D97, F ( C) -38 (-39) -33 (-36) -33 (-36) -22 (-30) Color, ASTM D1500 L3.0 L2.5 L2.5 L3.5 Sulfated Ash, ASTM D874, m% NR = Requirement Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M20097 Agricultural Products 78

84 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS Date 06/18 Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are performance engineered with proprietary additive technology. Designed to ensure long lasting engine durability under the toughest operating conditions. Meets the performance demands of newer engine hardware. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils are recommended for commercial overthe-road fleets, agriculture, construction equipment, buses, automobiles, and other similar dieselpowered applications where a premium quality engine oil is required. Engineered to provide long engine life in challenging service conditions Double the oil durability protection compared to conventional CJ-4 engine oils. Always follow OEM recommendations when extending oil drain intervals Maintains viscosity over extended service intervals, even under extreme operating conditions Recommended for low emission Tier 4 and on-highway low emission engines SAE 10W-30 improves fuel economy up to 3% compared to conventional 15W-40 viscosity grade oils PERFORMANCE CAPABILITIES: SAE VISCOSITY GRADE 10W-30 15W-40 RECOMMENDED FOR: CK-4 CJ-4 CI-4 PLUS CI-4 CH-4 SN Caterpillar ECF-3 Cummins CES Detroit Diesel 93K222 Volvo/Mack/Renault/VDS-4.5/EOS-4.5/RLD-4 Paccar Navistar - International Ford WSS-M2C171-F1 Notes: Consult owner's manual for proper SAE viscosity grade and API Service Category. Optimum drain intervals can be achieved utilizing oil analysis in conjunction with OEM guidelines. Agricultural Products (Continued) M

85 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS Date (Continued) 06/18 - (Continued) Category Mystik JT-8 API CJ-4 Mystik JT-8 API CK-4 Back serviceable YES YES Viscosity grades 15W-40/10W-30 15W-40/10W-30 Fleet million mile engine test rating Better Best 100% improved oxidation stability NO YES Greater shear stability vs. conventional API CJ-4 YES YES Aeration control vs. conventional API CJ-4 Better Best SAE 10W-30 sustains improved fuel economy through 50,000 miles API Comparison Chart Better Compatible with conventional API CJ-4 oils YES YES Best Overall Performance and Backward compatibility Better Best Best MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS Material Code SAE Grade 10W-30 15W-40 Gravity, ASTM D4052, API at 60 F Pounds/Gallon at 60 F Specific Gravity at 60 F Viscosity at 40 C, cst C, cst Viscosity Index CCS Viscosity, Temperature -25 C -20 C MRV Viscosity, Temperature -30 C -25 C MRV Yield Stress, Temperature <35 <35 Pour Point, F ( C) -38 (-39) -33 (-36) Flash Point, COC, F ( C) 432 (222) 450 (232) Noack Evaporative, ASTM D5800, % Loss Color, ASTM D1500 L3.0 L3.5 Total Base Number, ASTM D Sulfated Ash, ASTM D874, % wt Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20106 Agricultural Products 80

86 MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS SAE 10W-40 AND SAE 15W-50 Date 05/18 Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oil SAE 10W-40 provides an improvement in cold weather start up lubrication while providing excellent wear protection at higher operating temperatures. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oil SAE 15W-50 is designed for the equipment owner operating with older equipment with higher hours or miles that can benefit from a higher viscosity grade heavy duty engine oil. Both SAE grades are engineered to provide excellent protection for equipment operating in severe conditions and will provide extended diesel engine life. Mystik JT-8 Synthetic Blend Super Heavy Duty Engine Oils SAE 10W-40 and SAE 15W-50 are recommended for commercial over-the-road fleets, construction equipment, buses and other similar diesel-powered applications where premium quality engine is required. MYSTIK JT-8 SYNTHETIC BLEND SUPER HEAVY DUTY ENGINE OILS SAE 10W-40 AND SAE 15W-50 Material Code SAE Grade 10W-40 15W-50 API Service Category CK-4 CI-4 Plus Gravity, ASTM D 4052, API Density, lbs/gal Flash Point, ASTM D 92 (COC), F ( C) 442 (228) 440 (227) Viscosity, ASTM D 445, cst at 40 C cst at 100 C Viscosity Index, ASTM D CCS Viscosity, ASTM D 5293, cp 5700 at -25C 5300 at -20C MRV Pumpability, ASTM D 4684, cp 39,000 at -30C 23,100 at -25C MRV Yield Stress at -25 C, ASTM D 4684 <35 at -30C <35 at -25C Pour Point, ASTM D 97, F ( C) -49 (-45) 49 (-45) Color, ASTM D 1500 L3.5 L4.0 Sulfated Ash, ASTM D 874, m% Mystik and JT-8 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

87 MYSTIK JT-4 SYNTHETIC 4-CYCLE ALL-TERRAIN VEHICLE MOTOR OILS Date 06/18 FEATURES: RECOMMENDED: APPLICATIONS: Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils utilize premium synthetic base oils combined with a special additive system to provide outstanding protection for high performance All-Terrain Vehicle (ATV) and Utility Vehicle (UTV) engines. These full synthetic formulas provide optimum high and low temperature performance while minimizing volatility. This balance of synthetic technologies enhance fuel economy, improve cold temperature performance, and high temperature thermal and oxidation stability. The advanced additive systems are specifically designed for use in ATV and UTV engines. They provide superior protection against engine wear, rust and corrosion, and ensures engine cleanliness. Mystik JT-4 Synthetic 4-Cycle All-Terrain Vehicle Motor Oils, available in SAE 0W-40, SAE 10W- 40 and SAE 10W-50 grades, provide extra protection for gasoline powered ATV and UTV engines requiring a JASO MA quality oil. Protect in extreme hot and cold temperatures Permit lubrication flow during cold weather start-up Promote longer engine life by reducing wear, rust and corrosion Provide excellent thermal and oxidation stability Improve equipment productivity and reliability For use in 4-cycle gasoline powered ATV and UTV engines including those manufactured by Arctic Cat, Bombardier, Honda, Kawasaki, Polaris (including 1000 ProStar), Yamaha, and other original equipment manufacturers. Ideal for high performance engines operating in extreme low and high temperatures and where performance demands the most from your oil. Select the SAE 0W-40 grade, if frequent usage at low temperatures is expected. Consult your owner s manual for proper lubricant selection. Mystik JT-4 Synthetic All-Terrain Vehicle Motor Oils are recommended for use in 4-cycle gasoline powered ATV and UTV engine applications requiring a JASO MA quality oil. Designed to be used in wet clutch applications that require JASO MA quality oil. MYSTIK JT-4 SYNTHETIC 4-CYCLE ALL-TERRAIN VEHICLE MOTOR OILS Material Codes SAE Grade 0W-40 10W-40 10W-50 Gravity, ASTM D287, API Density, lbs/gal Flash Point, ASTM D92, COC, F ( C) 428 (220) 453 (234) 457 (236) Pour Point, ASTM D97, F ( C) 56 ( 51) 22 ( 30) -39 (-39) Viscosity, ASTM D C C Viscosity Index, ASTM D CCS Viscosity, cp ( C), ASTM D ( 35) 5660 ( 25) 6592 (-25) NOACK Volatility, ASTM D5800, % Loss Color, ASTM D Sulfated Ash, ASTM D874, m% TBN, ASTM D2896, mg KOH/g Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20080 Agricultural Products 82

88 MYSTIK JT-4 2-CYCLE LAWN AND GARDEN ENGINE OIL Date 06/18 Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is a premium performance synthetic blend lubricant designed for use in high performance air-cooled 2-cycle generators, chain saws, lawn mowers, snow blowers, leaf blowers, and trimmers. QUALITIES: Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is engineered for lower smoke and advanced protection for air cooled 2-cycle engines. This synthetic blend formula meets or exceeds the rigorous requirements of the API TC, JASO FD, FC and ISO-L-EGD classifications for 2-cycle air-cooled engine oils and also exceeds the performance requirements for JASO FC, JASO FB; ISO-L-EGC and -EGB. This advanced oil helps to protects today s high RPM air cooled 2-cycle engines against exhaust port blocking, combustion chamber and piston deposits, ring sticking and scuffing, and wear. The JASO FD Certification number for this lubricant is 001 MYS 091. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is formulated with premium base oils and a new low ash additive package that provides excellent lubricity and detergency performance which surpasses the standard for preventing piston and combustion chamber deposits. In addition, Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is a synthetic blend which reduces exhaust smoke and prevents piston seizure and cylinder scuffing. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil mixes readily with fuel for pre-mix type, even at low temperatures. APPLICATIONS: Mystik JT-4 2-Cycle Lawn and Garden Engine Oil is recommended for use in air-cooled, 2-cycle applications where an API TC, JASO FD, FC or ISO-L-EGD product is preferred. It can be used in either premix or oil injection systems up to 50:1 fuel to oil ratios. Do not use in engines requiring an NMMA TC-W3, TC-WII, or TC-W product. Consult owner s manual for fluid specifications. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil can be used in 2-cycle powered generators, chain saws, lawn mowers, snow blowers, leaf blowers, and trimmers operating in hot, dirty, dusty environments and high loads for extended periods. Mystik JT-4 2-Cycle Lawn and Garden Engine Oil provides the necessary protection to keep your air-cooled 2-cycle engine running cleaner, longer and with less smoke. MYSTIK JT-4 2-CYCLE LAWN AND GARDEN ENGINE OIL Material Code Agricultural Products Gravity, ASTM D4052, API 32.0 Density, lb/gal, at 60 F 7.21 Flash Point, PMCC, ASTM D93, F ( C) 185 (85) Flash Point, COC, ASTM D92, F ( C) 203 (95) Viscosity, ASTM D445, cst at 40 C 55 cst at 100 C 8.5 ASTM D2161, SUS at 100 F 281 SUS at 210 F 54.8 Viscosity Index, ASTM D Pour Point, ASTM D97, F ( C) -49 (-45) Appearance, Color Purple Sulfated Ash, ASTM D874, % 0.13 Total Base Number, ASTM D2896, mg KOH/g 2.2 Mystik and JT-4 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M

89 MYSTIK JT-7 MULTI-PURPOSE GEAR LUBRICANTS Date 07/18 Mystik JT-7 Multi-Purpose Gear Lubricants are multi-purpose, thermally stable, sulfur-phosphorus extreme pressure (EP) gear lubricants that exceed the performance requirements of the latest axle and non-synchronized manual transmission. A specially balanced additive provides thermally stable gear lubricants with exceptional durability under high temperature conditions. These are thermally stable and thermally durable gear lubricants. Others lose their EP performance when subjected to thermal stress. Mystik JT-7 Multi-Purpose Gear Lubricants can take the heat and continue to provide superior EP protection, minimum gear wear, excellent deposit control and improved rust and corrosion protection under extreme service conditions. Recommended for all automotive and heavy duty axle service including break-in, add-to or make-up, drain and refill, and for limited slip axles. (80W-90) FEATURES: Top quality, versatile hypoid EP gear lubricants; recommended in applications that specify API Gear Service GL-4, GL-5 and MT-1 and SAE J2360. Superior service in differentials of passenger cars and trucks and heavy duty equipment Excellent in limited slip differentials known as Sure-grip, Posi-trac, Trac-lock, etc., for complete fill or for top-off. (80W-90) Multiple viscosity grades with high viscosity index. Wide temperature range for all season application in most climates Have outstanding thermal stability/durability or long term heat resistance, better than most competitive conventional gear lubricants, thereby providing longer life at higher operating temperatures EP additive provides superior wear and scuff protection MYSTIK JT-7 MULTI-PURPOSE GEAR LUBRICANTS Material Code SAE Grade 80W-90 85W-140 AGMA Lubricant Number 4 EP 7 EP Gravity, ASTM D4052, API Density, lb/gal at 60 F Specific Gravity at 60 F Viscosities: at -12 C, cp 55,000 at -26 C, cp 90,000 at 40 C, cst at 100 C, cst at 100 F, cst (SUS) 172 (797) 514 (2380) at 210 F, cst (SUS) 17.4 (87.5) 33.6 (159) Viscosity Index Flash Point, ASTM D92, COC, F ( C) 403 (206) 438 (226) Pour Point, ASTM D97, F ( C) -27 (-33) 0 (-18) Color Red Red Mystik and JT-7 are registered trademarks protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M20008 Agricultural Products 84

90 MYSTIK UNIVERSAL GEAR LUBRICANT Date 7/18 For API Gear Lubricant Service: GL-4 Hypoid EP Mystik Universal Gear Lubricant contains a Sulfur-Phosphorus ( SP type) EP additive that provides antiwear and antiscuff lubricity. This product is recommended for gears subject to shock loading in service and for those gear set types requiring EP additive compounding because of their design characteristics. A Sulfur-Phosphorus ( SP type) mild EP additive provides antiwear and antiscuff lubricity for gears subject to shock loading in service and those gear set types requiring EP additive compounding because of their design characteristics. FEATURES: API Service Classification GL-4 May be used for add-to in automotive axles requiring a Hypoid EP lube except those incorporating limited slip or anti-spin features Economically satisfies industrial applications where large loss due to leakage is a factor MYSTIK UNIVERSAL GEAR LUBRICANT Material Code SAE Grade 90 AGMA Lubricant Number 4 EP Gravity ASTM D4052, API 22.9 Density, lb/gal at 60 F 7.6 Specific Gravity at 60 F Viscosities: at 40 C, cst 237 at 100 C, cst 16.5 at 100 F, cst (SUS) 275 (1273) at 210 F, cst (SUS) 17.1 (86.1) Viscosity Index 64 Flash Point, ASTM D92, COC, F ( C) 430 (221) Pour Point, ASTM D97, F ( C) -20 (-29) Color Dark Amber Mystik is a registered trademark of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

91 MYSTIK JT-5 SYNTHETIC BLEND TFX Date 07/18 Mystik JT-5 Synthetic Blend TFX tractor fluid is a performance engineered tractor fluid for the equipment owner needing longer component life and ensuring optimum efficiency for many years of tillage and harvesting operations. The investment in today s farm tractors often requires longer ownership of 10 years or more while operating at lowest possible maintenance cost. Achieving maximum equipment productivity is required for survival with so many challenges facing modern farm profitability Mystik JT-5 Synthetic Blend TFX is recommended for leading tractor manufacturers such as John Deere, New Holland, Kubota and Case/IH MAT 3540 to provide the convenience of one product for improved inventory management for mixed farm fleets while achieving optimum performance. Mystik JT-5 Synthetic Blend TFX is designed for modern farm tractors that produce significantly more horsepower requiring greater protection for high production machines that impose much greater stress on transmissions, axles with multiple high output hydraulic applications. FEATURES & PERFORMANCE BENEFITS ADVANCED TECHNICAL FEATURES Synthetic Blend Shear stable viscosity with a high viscosity index PERFORMANCE BENEFIT Improves performance over wider temperature range and reduces tendency of fluid breakdown due to sustained high operating temperatures Maintains and sustains optimum viscosity over the service intervals to ensure overall productivity and efficiency Promotes longer component life of heavily loaded components Suitable for CVT transmissions that require a stable viscosity through temperature changes and for the life of the oil. Non-Zinc anti-wear formulation Provides improved water tolerance that maintains efficiency throughout transmission, hydraulics and brake system Zinc free formula also reduces impact on environment Leak resistant-seal maintainer technology Special friction modifiers Clean system-detergent/dispersant Double acting anti-rust/anti-foam technology Wide temperature range Anti-slip formulation Conditions seals to prevent leakage as equipment ages with higher hours of operation Improves brake system function and protects against brake chatter Helps minimize tendency for transmission clutch plate glazing from high temperature, deposit build up, protecting against loss of friction control and power transfer efficiency to the drive train. Maintains high pressure hydraulic system efficiency by preventing hydraulic valve deposit build up and sluggish operation. Prevents system corrosion and controls tendency for air entrainment resulting in efficient power transfer. Excellent fluidity and start up lubrication that improves system response time in colder temperature operation Ensures power transfer efficiency under high loads in transmissions, axles and all hydraulic components M20107 (Continued) Agricultural Products 86

92 MYSTIK JT-5 SYNTHETIC BLEND TFX (Continued) Date 07/18 APPLICATIONS: RECOMMNED FOR THE FOLLOWING APPLICATIONS AGCO Power Fluid 821XL Allison C-4 CASE MS 1205, 1206, 1207, 1209, 1210 CAT TO-2 Denison HF-0, HF-1, HF-2 Eaton Hydraulics Ford New Holland ESN-M2C134-D Kubota UDT, Super UDT API GL-4 Case New Holland: MAT 3540, MAT 3525, MAT 3505 John Deere J20C Massey Ferguson M-1145 White Q-1826 Volo WB101 ZF TE-ML-03E, TE-ML-05F, TE-ML-17E, TE-ML-21F For use in the following OEM equipment: AGCO CASE IH Deutz Ford John Deere Komatsu Kubota Massey Ferguson New Holland White, and others. MYSTIK JT-5 SYNTHETIC BLEND TFX Material Code API Gravity, ASTM D4052, API 31.0 Density, lb/gal 7.3 Specific Gravity 0.88 Viscosities: at -20 C, cp 3493 at -35 C, cp at 40 C, cst at 100 C, cst 9.56 Viscosity Index 146 KRL Sheared Viscosity (20hr.) CEC L-45-A-99, cst 8.2 (Tapered Roller Bearing Shear Test) Tractor FZG ASTM D4998 Weight loss 19mg (Max is 50mg) Flash Point, COC, ASTM D92, F ( C) 457 (236) Pour Point, ASTM D97, F ( C) -43 (-45) Water Tolerance (Separation with 5% water) Ball EP Wear, ASTM D4172, mm 0.36 Color Light Amber Agricultural Products Mystik and JT-5 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. M

93 MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID Date 06/18 Mystik JT-5 Tractor Trans-Hydraulic Fluid provides excellent performance in modern agricultural equipment. It offers outstanding gear wear protection, brake chatter control and oxidation resistance. Particularly well suited for hard working applications where an added level of protection is desired. Excellent filterability characteristics along with rust and corrosion inhibitors, water tolerance and wide temperature range performance. FEATURES: Contains special friction modifiers for superior brake chatter control Formulated to resist leakage Formulated with advanced detergent/dispersant, antiwear, antioxidant, antirust and antifoam additives Has proven field performance APPLICATIONS: Recommended for use in equipment where the following fluids are specified: AGCO Power Fluid 821XL Allison C-4 CASE MS 1205, 1206, 1207, 1209, 1210 CAT TO-2 Denison HF-0, HF-1, HF-2 Eaton Hydraulics Ford New Holland ESN-M2C134-D Kubota UDT API GL-4 Case New Holland: MAT 3525 John Deere J20C Massey Ferguson M-1145 White Q-1826 Suitable for use in the following equipment: AGCO CASE IH KH Deutz Ford John Deere Komatsu Kubota Massey Ferguson New Holland Volvo WB101 White, and others (Continued) M20014 Agricultural Products 88

94 MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID (Continued) Date 06/18 - (Continued) MYSTIK JT-5 TRACTOR TRANS-HYDRAULIC FLUID Material Code API Gravity, ASTM D4052, API 31.0 Density, lb/gal 7.3 Specific Gravity 0.88 Viscosities: at -35 C, cp 48,200 at 40 C, cst 60.3 at 100 C, cst 9.3 Viscosity Index 130 Flash Point, COC, ASTM D92, F ( C) 457 (236) Pour Point, ASTM D97, F ( C) -40 (-40) Falex, ASTM D3233-A, lbs 1,350 4-Ball EP Wear, ASTM D4172, mm 0.38 Color Light Amber Mystik and JT-5 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Agricultural Products M

95 MYSTIK MULTI-PURPOSE ATF Date 06/18 Mystik Multi-Purpose ATF is a multi-function, automatic transmission fluid manufactured from selected high-quality base stocks and premium additives. It protects transmission parts against rust, corrosion, and wear. It is dyed red for leak detection and is engineered to give superior protection and performance. Mystik Multi-Purpose ATF is recommended where the following lubricants are specified: General Motors transmissions calling for DEXRON -III, DEXRON-IIE and DEXRON-II fluids; Ford transmissions calling for MERCON type ATF s; Allison Transmission Division (C-4). FEATURES: A single fluid for a wide variety of power transmission uses: automotive automatic transmissions, industrial torque converters, sensitive hydraulic fluid applications, power-shift transmissions, Allison automatic transmissions and power steering fluids. Excellent stability for long life service Anti-wear, anti-leak, anti-foam treated Detergent inhibitor provides gum-up resistance Can be used industrially as an excellent multi-viscosity, all weather hydraulic fluid, torque converter fluid and as a cold temperature gear lubricant Meets the performance requirements of the following hydraulic fluid, power-shift transmission fluid and automatic transmission fluid specifications: Vickers M-2950-S and I-286-S Caterpillar TO-2 Allison Type C-3 and C-4 GM DEXRON IIIG/H, IID/E Ford MERCON Ford ESP-M2C166H APPLICATIONS: Recommended for use in automatic transmissions manufactured by General Motors and Ford for model years 2006 and prior (except those calling for FORD Type F Fluid, MERCON SP, MERCON V, DEXRON-VI and CVT fluids). Suitable for use in foreign cars and trucks requiring the use of DEXRON-III, DEXRON-IIE, DEXRON-II fluids, and MERCON type ATF s. Consult owner s manual for fluid specification. MYSTIK MULTI-PURPOSE ATF Material Code Gravity, ASTM D4052, API 33.0 Pounds Per Gallon 7.16 Flash Point, ASTM D92, COC, F ( C) 424 (218) Pour Pont, ASTM D97, F ( C) -54 (-48) Viscosity, ASTM D445, cst at 40 C 34.3 cst at 100 C 6.95 ASTM D2983, cp at -20 C 1,020 cp at -40 C 15,100 Vicosity Index, ASTM D Color Red Mystik is a registered trademark protected by federal law. All other registered trademarks or trademarks are the property of their respective owners. M20023 Agricultural Products 90

96 MYSTIK JT-6 HI-TEMP GREASES Date 07/18 APPLICATIONS: APPROVALS: NLGI Certified GC-LB These high temperature Lithium Complex greases combine excellent multi-purpose properties with a high dropping point to give them application over a wide temperature range. Mystik JT-6 Hi-Temp greases exhibit a high Timken OK Load in addition to providing excellent Four-Ball Wear and EP performance. They provide superior protection to lubricate a wide variety of automotive, agricultural, trucking, mining, construction, and industrial equipment. They provide outstanding shock load protection. JT-6 Hi-Temp No. 2 is an extremely versatile performer that is highly recommended for disc brake wheel bearings and is specifically approved for use in Rockwell and Spicer universal joints. This grease provides excellent protection for heavily loaded industrial, mining, and construction applications. JT-6 Hi-Temp No. 1 was developed for applications where service conditions dictate a grease of softer consistency. Both meet the highest performance categories of ASTM D4950 Automotive Grease Classification System, GC for wheel bearing service and LB for chassis service. Mystik JT-6 Hi-Temp Greases provide excellent protection in severe service requirements such as disc brake wheel bearings, backhoe hinge pins, and conveyor bearings Mining operations, sand/gravel plants, and construction equipment where shock loads are placed on bearings benefit from the use of Mystik JT-6 Hi-Temp Greases Consult owner s manual for proper lubricant selection. Dana Corporation Spicer Universal/Joint Division M-2006-J (#2) Registered NLGI GC-LB Weatherford Artificial Lift (#2) NSF H2 (125250) CLASSIFICATION: Nonfood Compounds Program Listed H2 Registration No (Continued) Agricultural Products M

97 MYSTIK JT-6 HI-TEMP GREASES (Continued) Date 07/18 - (Continued) MYSTIK JT-6 HI-TEMP GREASES Material Code NLGI Consistency Number 1 2 NLGI Certified, ASTM D4950 GC-LB GC-LB Thickener Type Lithium Complex Lithium Complex Texture Smooth, Adhesive Smooth, Adhesive Color Red Red Worked Penetration, ASTM D Dropping Point, ASTM D2265, F ( C) 500 (260) 550 (288) Water Washout, ASTM D1264, % 175 F Rust Prevention, ASTM D1743, rating Pass Pass Copper Corrosion, ASTM D4048, rating 1b 1b Oil Separation, ASTM D1742, % loss 2 1 Timken OK Load, ASTM D2509, lb Four-Ball Wear, ASTM D2266, mm Four-Ball Weld, ASTM D2596, kgf Four-Ball Load Wear Index, ASTM D2596, kgf Approximate Temperature Range, F ( C) -10 to to 325 (-23 to 163) (-23 to 163) Base Oil Viscosity: 40 C, cst Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20026 Agricultural Products 92

98 MYSTIK JT-6 MULTI-PURPOSE GREASE Date 05/18 Mystik JT-6 Multi-Purpose Grease is an exceptionally water resistant product. It is light colored, low staining, and has a very low oil separation rate. Mystik JT-6 Multi-Purpose Grease provides excellent antiseize protection under high loads. Outstanding adhesion enables this product to stay in place better than most other greases. This product is a medium temperature range multi-purpose grease for extreme pressure loads and slow to medium speed bearings. It is excellent for greased chassis points, fifth wheels, and water pumps. It works especially well where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, and excellent rust protection is desired. It is fully rust and oxidation inhibited. Mystik JT-6 Multi-Purpose is also available in an aerosol form. This product penetrates hard-to-reach points to leave a protective coating of grease. Mystik JT-6 Multi-Purpose Spray Grease has the ability to stay in place and lubricate, even under extreme pressures and severe service. It resists rust, corrosion, oxidation, and wear. This product is ideal for hard to reach points and precise placement. Mystik JT-6 Multi-Purpose Spray Grease dries into a non-fluid consistency in about 15 minutes. FEATURES: Exceptionally water resistant - protects against corrosion Light colored and low staining Very low oil separation rate Provides anti-wear and extreme pressure protection Excellent adhesion permits it to have better stay-ability than most other greases APPLICATIONS: A medium temperature range multi-purpose grease for extreme pressure loads, slow to medium speed bearings, greased chassis points, fifth wheels, and water pumps Especially good where extended lubrication intervals are practical, highly loaded or shock loaded grease lubricated applications exist, or where excellent rust protection is desired Aerosol is excellent for hard to reach locations DANGER: Extremely flammable aerosol. Please refer to SDS for proper transport, storage and handling. Always check with local jurisdictions for warehouse requirements. Refer to equipment owner s manual for proper lubricant recommendation. NOTE: Because this product has better adhesion, it is a little more difficult to pump than less adhesive greases. Use of a follower plate is recommended where air driven pumps are used. (Continued) Agricultural Products M

99 MYSTIK JT-6 MULTI-PURPOSE GREASE (Continued) Date 05/18 - (Continued) MYSTIK JT-6 MULTI-PURPOSE GREASE AEROSOL (Grease) Material Code NLGI Consistency Number 2 2 Thickener Type Anhydrous Calcium Anhydrous Calcium Texture Smooth, Adhesive Smooth, Adhesive Color Medium Amber Medium Amber Worked Penetration, ASTM D Dropping Point, ASTM D566, F ( C) 290 (143) 290 (143) Water Washout, ASTM D1264, % loss at 100 F Rust Prevention, ASTM D1743, rating Pass Pass Oil Separation, ASTM D1742, % loss < 1 < 1 Timken OK Load, ASTM D2509, lb Four-Ball Wear, ASTM D2266, mm Four-Ball EP Weld Point, ASTM D2596, kgf Four-Ball Last Non-Seizure Load, ASTM D2596, kgf Approximate Application Temperature Range, F ( C) 0 to 250 (-18 to 121) 0 to 250 (-18 to 121) Base Oil Viscosity: 40 C, cst 1080 Mystik and JT-6 are registered trademarks of CITGO Petroleum Corporation. All other registered trademarks or trademarks are the property of their respective owners. Values shown are typical values only and do not constitute a specification. The information contained herein is subject to change without notice. M20027 Agricultural Products 94

100 MYSTIK JT-6 SUPER HEAVY DUTY 460 GREASE Date 05/18 FEATURES: APPLICATIONS: Mystik JT-6 Super Heavy Duty 460 Grease is an extended service capable, extreme pressure (EP) lubricating grease designed for a wide variety of heavy duty industrial, on highway and off highway equipment applications, especially pins, bushings and anti-friction bearings. Provides extra wear protection when operating with higher loads resulting in longer equipment component life. It is highly recommended for heavily loaded plain and anti-friction bearings such as those found in steel, paper, and cement industries. Mystik JT-6 Super Heavy Duty 460 Grease is lithium complex thickened grease formulated with a premium additive system and a combination of synthetic and conventional base oils. The optimized formula provides superior performance properties over a wide operating temperature range. Proprietary adhesive, stay-in-place formula helps seal out contaminants and extend lubrication intervals High load-carrying capacity offers wear protection even under severely loaded conditions Enhanced water and corrosion resistance protects equipment under adverse conditions including saltwater spray and exposure to corrosive anti-icing agents Wide operating range of 5 to 350 F for a variety of weather conditions and application temperatures Mystik JT-6 Super Heavy Duty 460 offers superior protection in a variety of applications where enhanced load carrying capability, water resistance, and anti-corrosion protection properties are required such as: Heavy Duty and Extreme Heavy Haul Trucking 5th wheels, U-joints, kingpins, steering drag links, shackle pins, pivots and cross shaft spring pins Mining and Construction - bulldozers, scrapers, backhoes, excavators, compactors, cranes, paving machinery, articulated vehicles, soil compactors, graders, ditch hoes, loaders Pit and Quarry Equipment rock crushers, conveyors, rock drills, bridge cranes, water tender, log trucks, chip van trucks Agriculture tractors, implements, tillage, planting and seeding machinery, sprayers and spreaders, hay balers, harvesting machinery, combines, mowers, skid steers Heavy Industry heavily loaded plain and anti-friction bearings in cement, paper, metal (steel, aluminum, copper) industries Forestry and Logging harvester-processor, feller-buncher, mulcher-masticator, brush cutter, shovel logger, skidder, brush piling shovel, brush rake, yarder, log landing machines, shovel, stroke delimber, loader, grinder, chipper, debarker, forest road machines Mystik JT-6 Super Heavy Duty 460 helps increase equipment life through superior performance including higher load capacity, capable of carrying up to 3X more load than conventional greases. Consult owner s manual for proper lubricant selection. Mystik JT-6 Super Heavy Duty Conventional Grease 3X Performance Agricultural Products Four Ball Weld kgf ASTM D-2596 M20098 (Continued) 95

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer

More information

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES

2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE, SMALL ENGINE, MOTORCYCLE & MARINE VEHICLES 2-CYCLE CLAIMS PACK SIZES Universal * 12/2.6 Ounces 60179 12/8 Ounces 60138 Synthetic Universal * 12/2.6 Ounces 63119 Synthetic Blend with Fuel Stabilizer*

More information

Premium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL

Premium Protection for Today s Engines EXTRA PROTECTION AND VALUE. PROTECK TM ELITE K SYNTHETIC BLEND ENGINE OIL Premium Protection for Today s Engines TM EXTRA PROTECTION AND VALUE. TM ELITE K SYNTHETIC BLEND ENGINE OIL TM ELITE K SYNTHETIC BLEND 10W-30 AND 15W-40 CK-4 ENGINE OIL PROVIDES EXTRA PROTECTION AND VALUE,

More information

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements

More information

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE

EXCEPTIONAL STABILITY PROFOUND PERFORMANCE EXCEPTIONAL STABILITY PROFOUND PERFORMANCE CENEX PREMIUM GASOLINE ENGINE OILS POWERFUL GASOLINE ENGINE OILS Remarkable Engine Protection Engineered to exceed the latest industry and manufacturers requirements

More information

PRODUCT GUIDE AUTOMOTIVE, COMMERCIAL & INDUSTRIAL

PRODUCT GUIDE AUTOMOTIVE, COMMERCIAL & INDUSTRIAL ENGINE OILS AUTOMOTIVE GEAR OILS TRANSMISSION/POWER FLUIDS GREASES INDUSTRIAL FLUIDS INDUSTRIAL GEAR OILS METALWORKING FLUIDS INDUSTRIAL GAS ENGINE OILS RAILROAD LUBRICANTS FUNCTIONAL PRODUCTS COMPRESSOR

More information

HEAVY DUTY DIESEL ENGINE OILS

HEAVY DUTY DIESEL ENGINE OILS HEAVY DUTY DIESEL ENGINE OILS FULL SYNTHETIC MAG 1 Full Heavy Duty Diesel Engine Oil is designed to provide the highest levels of protection and performance from our most advanced technology and formulations.

More information

Conventional and Synthetic Blend Lubricants

Conventional and Synthetic Blend Lubricants Below is a short summary about some of the more popular lubricants that we carry at the Beattie Coop. Conventional and Synthetic Blend Lubricants SuperLube TMS (Heavy Duty Diesel Engine Oil) SuperLube

More information

DELIVERING MAXIMUM ENGINE PROTECTION

DELIVERING MAXIMUM ENGINE PROTECTION DELIVERING MAXIMUM ENGINE PROTECTION CENEX HEAVY DUTY DIESEL ENGINE OILS PREMIUM HEAVY DUTY DIESEL ENGINE OILS for Superior Engine Protection Engineered to exceed the highest industry and diesel engine

More information

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification.

The values listed below are typical of current production. As variations may occur, these numbers do not constitute a specification. HEAVY-DUTY DIESEL MOTOR OIL D-MO 10W-30, 15W-40 PRODUCT DESCRIPTION D-MO (Diesel Motor Oil) is designed to exceed the tests required for the new API CK-4 specification for all naturally aspirated and high-output

More information

Mobil Delvac 1300 Super

Mobil Delvac 1300 Super PrintFind a PDSFind a MSDS Mobil Delvac 1300 Super Extra High Performance Diesel Engine Oil Product Description Mobil Delvac 1300 Super 10W-30 and 15W-40 are extra high performance diesel engine oils that

More information

PREMIUM QUALITY MOTORCYCLE OIL 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF

PREMIUM QUALITY MOTORCYCLE OIL 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF 4 T 5W-40 ( FULLY SYNTHETIC) API SL/CF MG Oil 4 T Fully Synthetic motorcycle oil is specifically developed for the stringent lubricating requirements of the more and more sophisticated modern 4-stroke

More information

PASSENGER CAR MOTOR OILS

PASSENGER CAR MOTOR OILS PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed

More information

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing

BEL-RAY MOTOR OIL. Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and keeps pistons and rings from scuffing V-Twin Synthetic Motor Oil BEL-RAY MOTOR OIL Exclusive Bel-Ray anti-wear chemistry reduces bearing and valve train wear and and keeps pistons and rings from scuffing Features high polarity synthetic base

More information

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines.

15W40 CH4/SJ. For all naturally aspirated and heavy duty turbocharged and intercooler diesel engines. 15W40 CH4/SJ : This oil is a high performance, dedicated heavy duty engine lubricant designed for use in modern high speed turbocharged diesel engines. It uses an exclusive additive formulation in conjunction

More information

PASSENGER CAR MOTOR OILS

PASSENGER CAR MOTOR OILS PASSENGER CAR MOTOR OILS FULL SYNTHETIC OEMs continue to evolve engine designs that demand more from motor oil. One brand has evolved right alongside MAG 1. MAG 1 with FMX Technology provides unsurpassed

More information

CAM2

CAM2 www.cam2.com 1-800-338-CAM2 1 2 What Does Motor Oil do for Your Engine? 4 What is in your CAM2 motor oil? 4 Why You Change Your Motor Oil 5 Selecting the Right Motor Oil for Your Vehicle 6 Viscosity 6

More information

HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL

HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL HAVOLINE PRODS FULL SYNTHETIC MOTOR OIL SAE 5W-40, Euro 5W-40 PRODUCT DESCRIPTION Fully synthetic motor oils formulated to provide exceptional wear protection in hot or cold operating temperatures. They

More information

PASSENGER CAR MOTOR OILS

PASSENGER CAR MOTOR OILS PASSENGER CAR MOTOR OILS FULL SYNTHETIC / EURO / Full Synthetic SAE 0W-20 dexos1 TM Gen 2 A, C, F, G, H Full Synthetic SAE 5W-20 A, C, F, G, H Full Synthetic SAE 5W-30 dexos1 TM Gen 2 A, B, C, F, G, H

More information

CHAMPION OEM SPECIFIC 0W30 MS-BHDI

CHAMPION OEM SPECIFIC 0W30 MS-BHDI NEW PRODUCTS PASSENGER CAR NEW 0W30 MS-BHDI KEY BENEFITS Meeting PSA specification B71 2312. Euro VI Blue HDI DW 10F. Fuel economy benefit of 4,2% over a 5W40 oil. Backward compatible with all euro IV

More information

PRO-SPEC IV SYNTHETIC BLEND

PRO-SPEC IV SYNTHETIC BLEND PRO-SPEC IV SYNTHETIC BLEND 89 Years of world-class manufacturing experience has enabled Texas Refinery Corp. to develop the most robust Total Base Number in the industry, miles ahead of other CJ-4 oils

More information

MorGas PRODUCTCATALOG 2013

MorGas PRODUCTCATALOG 2013 MorGas PRODUCTCATALOG 2013 QUALITY ASSURANCE With MorGas you have quality assurance from start to finish... All incoming raw materials are tested to assure quality All products are manufactured using the

More information

Delo 400 MGX SAE 15W-40 Superb Protection in both High - and - Low Sulphur Diesel Fuel Environments

Delo 400 MGX SAE 15W-40 Superb Protection in both High - and - Low Sulphur Diesel Fuel Environments Delo 400 MGX SAE 15W-40 Superb Protection in both High - and - Low Sulphur Diesel Fuel Environments INTRODUCTION Let s Go Further with Delo 400 MGX SAE 15W-40. When your heavy-duty equipment is working,

More information

Valvoline Premium Blue Plus

Valvoline Premium Blue Plus What is? Valvoline is a benchmark in diesel engine oil technology, specially produced to lubricate the modern diesel engines meeting latest emission norms operating under a wide variety of service conditions.

More information

NEW PRODUCTS MARCH 2015 WOLF OFFICIALTECH 0W30 MS-BHDI KEY BENEFITS SPECIFICATION LEVEL PACKAGING DESCRIPTION PERFORMANCE NEW

NEW PRODUCTS MARCH 2015 WOLF OFFICIALTECH 0W30 MS-BHDI KEY BENEFITS SPECIFICATION LEVEL PACKAGING DESCRIPTION PERFORMANCE NEW NEW PRODUCTS PASSENGER CAR MOTOR OILS NEW 0W30 MS-BHDI KEY BENEFITS Meeting PSA specification B71 2312. Euro VI Blue HDI DW 10F. Fuel economy benefit of 4,2% over a 5W40 oil. Backward compatible with all

More information

DIVELUCA OIL COMPANY

DIVELUCA OIL COMPANY DIVELUCA OIL COMPANY HIGH QUALITY OIL LUBRICANTS Email: info@diveluca.com Web: www.diveluca.com PH. 713-589-3164 Houston, TX PH. 954-536-6602 Miami, FL PRODUCTS ENGINE OIL Gasoline Motor Oil Non-Detergent

More information

ADVANCED ENGINE PROTECTION FROM DAMAGING DEPOSITS & WEAR NOW INCLUDING

ADVANCED ENGINE PROTECTION FROM DAMAGING DEPOSITS & WEAR NOW INCLUDING ADVANCED ENGINE PROTECTION FROM DAMAGING DEPOSITS & WEAR NOW INCLUDING TRIM THROW OUT PAGE 2mm from edge Havoline with Deposit Shield For over 100 years, Havoline engine oils have been trusted and tested

More information

Reduces friction losses by half, resulting in fuel economy exceeding 3% (compared to standard 5W30 oil)

Reduces friction losses by half, resulting in fuel economy exceeding 3% (compared to standard 5W30 oil) Product Code 45607 Reduces friction losses by half, resulting in fuel economy exceeding 3% (compared to standard 5W30 oil) ECOTech 5W30 ULTRA FE A full synthetic engine lubricant, formulated using the

More information

PRODUCT CATALOG 20 16

PRODUCT CATALOG 20 16 PRODUCTCATALOG 2016 Passenger Cars Synth-Blend Motor Oils: MorGas Motor Oils are premium quality, passenger car motor oils (PCMO) that meet the latest automotive manufacturers requirements of API SN. MorGas

More information

Catalog Number Greases, Oils & Lubricants

Catalog Number Greases, Oils & Lubricants Catalog Number 90600 Greases, Oils & Lubricants Greases 11315 11300 11304 11302 11316 Multi-Purpose Lithium Grease Long lasting, hard working formula delivers high performance in a wide range of heavy-duty

More information

AUTOMOTIVE LUBRICANTS

AUTOMOTIVE LUBRICANTS Table of Contents Page General Application Guide Shell Engine Oils............................. 3.3 Antifreeze / Coolant Shellzone................................... 3.4 Rotella ELC Extended Life Coolant................

More information

Univar / Boss Lubricants Product Portfolio

Univar / Boss Lubricants Product Portfolio Univar / Boss Lubricants Portfolio 1 Hydraulic Oils Engine Oils Keep your engines in optimal condition with the complete line of engine oils from BOSS Lubricants. We have a number of different oil blends

More information

PRODUCT NAME ANTI OXIDANT BRAND NAME PETRO HIND PRODUCT CODE- BAB 108

PRODUCT NAME ANTI OXIDANT BRAND NAME PETRO HIND PRODUCT CODE- BAB 108 PRODUCT NAME ANTI OXIDANT PRODUCT CODE- BAB 108 BAB 108 is a kind of multipurpose ash-free additive. It not only boasts outstanding anti-oxidation performance, but has great abrasion resistance and extreme

More information

Part No oz. (946 ml) bottle 11 oz. (325 ml) can

Part No oz. (946 ml) bottle 11 oz. (325 ml) can Diesel Service Page 1 / Page 2 The BG Diesel Service addresses the needs of these specialized powerplants by restoring lost performance and preventing costly repairs. This service will reduce overall maintenance

More information

The PURUS Advantage Product Overview

The PURUS Advantage Product Overview The PURUS Advantage The PURUS Advantage Product Overview PURUS Heavy Diesel Engine Oils (HDEO) have been designed to deliver premium performance in over-the-road & off-road applications PURUS HDEO provides

More information

LONG SERVICE LIFE OILS. The Larix MED engine oils are particularly developed for all modern turbocharged, high output

LONG SERVICE LIFE OILS. The Larix MED engine oils are particularly developed for all modern turbocharged, high output MODERN EXTENDED DRAIN S LONG SERVICE LIFE OILS The Larix MED engine oils are particularly developed for all modern turbocharged, high output gasoline and diesel cars. The Larix MED range consists of four

More information

CONTENTS 01 GASOLINE ENGINE OILS 02 DIESEL ENGINE OILS 04 AUTOMOTIVE FLUIDS 05 AUTOMOTIVE GREASES

CONTENTS 01 GASOLINE ENGINE OILS 02 DIESEL ENGINE OILS 04 AUTOMOTIVE FLUIDS 05 AUTOMOTIVE GREASES CONTENTS 01 GASOLINE ENGINE OILS 02 DIESEL ENGINE OILS...... 2 10 0 3 M A N U A L A U T O M O T I V E G E A R O I L S... 1 7 04 AUTOMOTIVE FLUIDS... 05 AUTOMOTIVE GREASES... 6 Oraby Street, El Tawfikeya

More information

2013 FUEL & OIL / LUBRICANT PRICING

2013 FUEL & OIL / LUBRICANT PRICING 2013 FUEL & OIL / LUBRICANT PRICING EFFECTIVE JANUARY 1, 2013 (Updated August 23, 2013) INCLUDES: Pre-Mixed Fuel (2-Stroke) Pre-Mixed Fuel (4-Stroke) Bar & Chain Oil 2-Stroke Engine Oil - XP Professional

More information

THE MODERN ENGINE OILS

THE MODERN ENGINE OILS MODERN LONG SERVICE LIFE S THE MODERN S The Hypoxis MLS lubricants of Dyade are high quality lubricants with one of the latest API specifications. The Hypoxis MLS comes in the 5W/30 and 5W/40 full synthetic

More information

GE Eco - Synthetic. Usage of GE ECO SYN

GE Eco - Synthetic. Usage of GE ECO SYN GE Eco - Synthetic GE ECO SYN is a fully synthetic motor oil SAE 0W-20. Formulated with Triple Synthetic Technology and outstanding additives treat. The premium additives are developed for the future vehicle

More information

LUBRICANTS AND ENGINE CARE PRODUCTS

LUBRICANTS AND ENGINE CARE PRODUCTS ENGINE OILS SMOOTH, CLEAN & TROUBLE-FREE Like any precision instrument, your marine engine requires precise care to keep it running at peak performance. If you bought the best, keep it the best. Use only

More information

High-Tech Lubricants. Protect high-tech machines. Extend the life of your equipment.

High-Tech Lubricants. Protect high-tech machines. Extend the life of your equipment. High-Tech Lubricants Protect high-tech machines. Extend the life of your equipment. 2 Better lubricants for better performance Introduction Protecting the equipment you depend on Machines and lubricants

More information

Marine Range.

Marine Range. Marine Range www.motul.com ADVICE Why do Marine engines require specific lubricants? Marine engines are used in very different conditions from that of automotive engines. They are also operating at much

More information

FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO

FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO DELO DELIVERS CONFIDENCE TABLE OF CONTENTS Introduction 3 Engine Oils 4-5 Transmission Fluids 6 Gear Lubricants 7 Greases 8 Coolant/Antifreeze

More information

FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO

FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO FOR COMMERCIAL ON-HIGHWAY HEAVY-DUTY PROTECTION CHOOSE DELO DELO DELIVERS CONFIDENCE TABLE OF CONTENTS Introduction 3 Engine Oils 4-5 Transmission Fluids 6 Gear Lubricants 7 Greases 8 Coolant/Antifreeze

More information

PRECISION HYDRAULIC PERFORMANCE

PRECISION HYDRAULIC PERFORMANCE PRECISION HYDRAULIC PERFORMANCE CENEX PREMIUM HYDRAULIC FLUIDS CENEX HYDRAULIC OIL for All Your Applications Choose the right premium hydraulic fluid for all of your equipment applications. Your precision

More information

TOP 1 OIL PRODUCTS COMPANY

TOP 1 OIL PRODUCTS COMPANY TOP 1 ENGINE OIL TREATMENT-GOLD TOP 1 ENGINE OIL TREATMENT-GOLD is a fast-action, multi-power oil additive engineered for high performance engines. TOP 1 GOLD is engineered to improve the oil by helping

More information

ENGINEERED FOR DYNAMIC PERFORMANCE

ENGINEERED FOR DYNAMIC PERFORMANCE ENGINEERED FOR DYNAMIC PERFORMANCE Integrated Lubricant Manufacturing Hub Hin Leong Marine International, part of Hin Leong Group, began production of lubricants in Singapore in 1995 under the brand HL

More information

AUTOMOTIVE LUBRICANTS PROGRAM

AUTOMOTIVE LUBRICANTS PROGRAM AUTOMOTIVE LUBRICANTS PROGRAM OEM-APPROVED, LICENSED AND GUARANTEED AUTOMOTIVE LUBRICANTS MARKETING TOOLS TO ACQUIRE AND RETAIN CUSTOMERS THE CITGO AUTOMOTIVE LUBRICANTS FAMILY ENGINE OIL Gasoline Diesel

More information

TABLE OF CONTENTS INDUSTRIAL PRODUCTS CONTACT INFO. Chemicals Brake Fluid/Diesel Engine Oils Fleet Motor Oil/Grease Gear Oil Hydraulic Fluid

TABLE OF CONTENTS INDUSTRIAL PRODUCTS CONTACT INFO. Chemicals Brake Fluid/Diesel Engine Oils Fleet Motor Oil/Grease Gear Oil Hydraulic Fluid Quality Lubricants Customer Satisfaction TABLE OF CONTENTS AUTOMOTIVE Chemicals Brake Fluid/Diesel Engine Oils Fleet Motor Oil/Grease Gear Oil Hydraulic Fluid PCMO Small Engine Oil Automatic Transmission

More information

CHAIRMAN'S MESSAGE. Thanking you, Redha Hassan Al Yousuf Chairman

CHAIRMAN'S MESSAGE. Thanking you, Redha Hassan Al Yousuf Chairman CHAIRMAN'S MESSAGE UNITED GREASE & LUBRICANTS CO.LLC was established with the aim of responding to our customers needs in an efficient, dynamic and profitable way and guide our esteemed customers with

More information

enjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions

enjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions enjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions the line of i-sigma lubricants From eni s research laboratories comes a complete line

More information

USING ENGINE OIL TO IMPROVE FUEL ECONOMY

USING ENGINE OIL TO IMPROVE FUEL ECONOMY USING ENGINE OIL TO IMPROVE FUEL ECONOMY Everything you need to know about HTHS viscosity Brian Humphrey, OEM Technical Liaison - HD Driveline, Petro-Canada Lubricants 1 CONTENT OUTLINE 1. What is HTHS

More information

Spectra Xtreme 15W40 CJ-4

Spectra Xtreme 15W40 CJ-4 Spectra Xtreme CJ-4 Advanced Performance Synthetic Blend Motor Oil SAE 15W-40 Synthetic blend, multi-grade Diesel or Gasoline motor oil formulated for severe duty and extended drain intervals Provides

More information

AGRICULTURE CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER

AGRICULTURE CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER AGRICULTURE CHEVRON LUBRICANTS CAN HELP YOU RUN BETTER LONGER LUBRICANTS FOR THE AGRICULTURE INDUSTRY Yield Greater Reliability Chevron lubricants are formulated to help your agriculture equipment perform

More information

RANGE OF LUBRICANTS MOTOR BIKE, MARINE, SNOW AND SPECIAL PRODUCTS. FOLLETO_LUBS.Ingles.indd 1 8/3/10 13:32:01

RANGE OF LUBRICANTS MOTOR BIKE, MARINE, SNOW AND SPECIAL PRODUCTS. FOLLETO_LUBS.Ingles.indd 1 8/3/10 13:32:01 RANGE OF LUBRICANTS 4T 2T MOTOR BIKE, MARINE, SNOW AND SPECIAL PRODUCTS FOLLETO_LUBS.Ingles.indd 1 8/3/10 13:32:01 Contents PAGE REPSOL MOTO 4T 4-5 REPSOL MOTO RACING 4T REPSOL MOTO SUPERSPORT 4T REPSOL

More information

QMI Heavy Duty Product & Equipment Information Sheets

QMI Heavy Duty Product & Equipment Information Sheets QMI Heavy Duty Product & Equipment Information Sheets 1. Table of Contents Fleet/Industrial Service 2. QMI Diesel Fuel Treatment with Cetane Booster 91, 915, 9155 3. QMI Diesel Fuel Treatment 92, 925,

More information

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016

NGEO REVIEW Ray Sparling, Technical Support. January 20, 2016 NGEO REVIEW Ray Sparling, Technical Support January 20, 2016 Agenda Natural Gas Stationary Engines Types/Applications Vehicular Engines Types/Applications OEMs and Approvals Summary Open Discussion Stationary

More information

AUTOMOBILE LUBRICANT INDUSTRIAL LUBRICANT GREASE

AUTOMOBILE LUBRICANT INDUSTRIAL LUBRICANT GREASE INDUSTRIAL LUBRICANT GREASE TOP PRIME 0W40 XTeer TOP PRIME is a premium performance engine oil formulated with state of the art additives and fully synthetic base fluids (PAO+GIII). It provides best

More information

Industrial Engine Oils

Industrial Engine Oils Industrial Engine Oils Pal SAE-40,20W40 Hylube-40,20W40 Pal PHD-40(Captain) Pal PMG-40(Shakti) Pal PMG-20W40(Shaktiman) Pal PPG 4-15W40,20W40 Pal Marine Oils PAL SAE-40, 20W40 INDUSTRIAL OILS GENERAL PURPOSE

More information

LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS

LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS ENGINE OIL TESTS LOW TEMPERATURE OPERABILITY STARTABILITY & CHARACTERISTICS The ability of an engine oil to flow or be pumped at low temperatures especially at start up is critical to the life of an engine.

More information

Heavy Duty Fleet Lubricants. Engineered for Performance

Heavy Duty Fleet Lubricants. Engineered for Performance Heavy Duty Fleet Lubricants Engineered for Performance Heavy Duty Product Range Superior Heavy Duty Diesel Engine Lubricants Keeping operating costs under control We have been looking to keep our fleet

More information

PASSENGER CAR MOTOR OIL SMITTYSINC.NET

PASSENGER CAR MOTOR OIL SMITTYSINC.NET PASSENGER CAR MOTOR OIL SMITTYSINC.NET PASSENGER CAR MOTOR OIL Super S Passenger Car Motor Oils are warranted by the Super S Satisfaction Lubricant Warranty. Our extensive testing assures that all of our

More information

Performance Series Motor Oil. Automatic Transmission Fluid

Performance Series Motor Oil. Automatic Transmission Fluid Marathon Products 1 2 Performance Series Motor Oil Heavy Duty Motor Oil 9 15 Automatic Transmission Fluid Automotive Gear Lubes 17 20 2-Cycle Oil Hydraulic Oils 21 23 Transmission/Drive Train Fluid Endurance

More information

This product guide will be your reference to the high quality range of lubricants available in Misr Petroleum Co.

This product guide will be your reference to the high quality range of lubricants available in Misr Petroleum Co. Misr Petroleum Co. is a major manufacturing and marketing company in Egypt. We manufacture and market a wide range of lubricants such as automotive, industrial and greases. These lubricants are blended

More information

VECTON with System Pro Technology TM

VECTON with System Pro Technology TM Spotlight on: VECTON with System Pro Technology TM New engines bring new challenges for your oil VECTON can give you confidence to take on these challenges System Pro Technology means longer useful oil

More information

Quick guide to Havoline engine oils. Product SAE Code API API ILSAC ACEA MB VW A3/B3 A3/B4 C3 A3/B3 A3/B4 C ,

Quick guide to Havoline engine oils. Product SAE Code API API ILSAC ACEA MB VW A3/B3 A3/B4 C3 A3/B3 A3/B4 C , November 2009 Quick guide to Havoline engine oils Product SAE Code ILSAC ACEA MB VW Havoline Fully Synthetic 5W-40 3032 SM CF - Havoline Fully Synthetic C3 5W-30 3042 SM CF - A3/B3 A3/B4 C3 A3/B3 A3/B4

More information

AUTOMOTI VE LUBRIC ANTS PROGRAM

AUTOMOTI VE LUBRIC ANTS PROGRAM AUTOMOTI VE LUBRIC ANTS PROGRAM OEM-APPROVED, LICENSED AND GUARANTEED AUTOMOTIVE LUBRICANTS MARKETING TOOLS TO ACQUIRE AND RETAIN CUSTOMERS THE CITGO AUTOMOTIVE LUBRICANTS FAMILY ENGINE OIL Gasoline Diesel

More information

Gasoline Engine Oils Synthetic & Semi Synthetic

Gasoline Engine Oils Synthetic & Semi Synthetic Gasoline Engine Oils Synthetic & Semi Synthetic Page 1 of 61 QBREX SM/CF Qbrex International QBREX API SM/CF is a fully synthetic lubricants for ultimate engine protection and performance. It is a multi-grade

More information

PRODUCT CATALOG LUBRICANTS / ADDITIVES / FUNCTIONAL FLUIDS / BATTERIES

PRODUCT CATALOG LUBRICANTS / ADDITIVES / FUNCTIONAL FLUIDS / BATTERIES AUTOMOTIVE AND INDUSTRIAL LUBRICANTS / ADDITIVES / FUNCTIONAL FLUIDS / BATTERIES PRODUCT CATALOG WARCO PRODUCTS, Inc. 12505 SW Herman Road Tualatin, OR 97062 USA PH: 1+503.783.0250 FAX: 1+503.612.1700

More information

Formulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications

Formulated for better protection, longer oil life and better system efficiency. Extra protection Industrial applications SHELL TELLUS INDUSTRIAL HYDRAULIC FLUIDS The Shell Tellus range of hydraulic fluids is designed to help make it easy for equipment operators to select the Shell lubricant that will best deliver value to

More information

Motonic 4 T JASO MA2 SAE 20W-50 Engine Oil

Motonic 4 T JASO MA2 SAE 20W-50 Engine Oil March 2016 Revision: 0 Page 1 of 2 Motonic 4 T JASO MA2 SAE 20W-50 Engine Oil DESCRIPTION... Motonic 4 T is made with the most advanced and exclusive additive technology with titanium (Ti) and basic mineral

More information

RHINO LUBRICANTS. RHINO Lubricants Product Guide This Guide is Applicaple FOR Our Three plants products

RHINO LUBRICANTS. RHINO Lubricants Product Guide This Guide is Applicaple FOR Our Three plants products RHINO LUBRICANTS RHINO Lubricants Product Guide This Guide is Applicaple FOR Our Three plants products The Lubricants Leader!!! - 2 - Introduction Welcome to the Rhino Lubricants Product Guide, Rhino reference

More information

SAE 10W-30 CK-4 Synthetic Blend is OEM certified by Cummins, Detroit Diesel, Volvo, Mack, Ford, and Renault; and recommended

SAE 10W-30 CK-4 Synthetic Blend is OEM certified by Cummins, Detroit Diesel, Volvo, Mack, Ford, and Renault; and recommended SAE 15W-40 CK-4 is OEM certified by Cummins, Detroit Diesel, Volvo, Mack, Ford, and Renault; and recommended for use in all engines specifying API CK-4 Service Category and SAE 15W-40. KL-HD0560 $15.95

More information

Komatsu Genuine Lubricants & Coolant. Superior protection

Komatsu Genuine Lubricants & Coolant. Superior protection Lubricants & Coolant Superior protection Komatsu Genuine Lubricants & Coolant Diesel Engine Oil Hydraulic Oil Axle Oil Powertrain Oil Super-coolant AF-NAC Komatsu Oil/Fuel & Wear Analysis KOWA Superior

More information

Full Range of Total Lubricants. For passenger cars

Full Range of Total Lubricants. For passenger cars Full Range of Total Lubricants For passenger cars Passenger Car Product Range Superior quality lubricants WHO IS TOTAL? At Total, expertise equals quality Total, the world s fifth-largest oil company,

More information

Contents 2T Fully Synthetic Racing 2 2T FC Air-cooling 2 2T FB Air-cooling 3 2T TC-W3 Water-cooling Engine Oil 3 4T SJ MA 10W-50,4T SM MA2 10W-50 Full

Contents 2T Fully Synthetic Racing 2 2T FC Air-cooling 2 2T FB Air-cooling 3 2T TC-W3 Water-cooling Engine Oil 3 4T SJ MA 10W-50,4T SM MA2 10W-50 Full Introduction Introducing Sinopec The Sinopec Group is the world s second largest oil refiner. Its products have been keeping the wheels of the Chinese economic miracle turning for years. From oil and gas

More information

Specification Number. CXO-0W30-LAS12 WSS-M2C171-D 1 Liter 12 (Case Qty.) CXO-0W30-DAS WSS-M2C171-D 55 U.S. gal Specification Number

Specification Number. CXO-0W30-LAS12 WSS-M2C171-D 1 Liter 12 (Case Qty.) CXO-0W30-DAS WSS-M2C171-D 55 U.S. gal Specification Number Motor Oil 0W-30 Super All Season Motor Oil CXO-0W30-LAS12 WSS-M2C171-D 1 Liter 12 (Case Qty.) 167658 CXO-0W30-DAS WSS-M2C171-D 55 U.S. gal. 1 167658 0W-30 API SERVICE CI-4/SN Motorcraft 0W-30 Super All

More information

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control

Hydraulic Fluids. Castrol Blue Hydraulic Plus C 19. Product Data. Water Tolerance. Thermal Stability Oxidation and Control C 19 meets the most severe industry requirements including the new hybrid test from Denison (T6H2OC), which incorporates both vane and piston pumps under wet and dry conditions over 600 hours. Formulated

More information

eni lubricants eni lubricants

eni lubricants eni lubricants marine lubricants eni lubricants eni lubricants From eni's research department comes the eni i-sea line of lubricants, designed for all types of pleasure craft, from yachts to dinghies right through to

More information

Lubricants. Health and Safety. Cat DEO. Fluid Information and Part Numbers

Lubricants. Health and Safety. Cat DEO. Fluid Information and Part Numbers Lubricants Health and Safety 2312621 Under normal conditions of intended use, these products do not pose a risk to health. Excessive exposure may result in eye, skin or respiratory irritation. Always observe

More information

LUBRICANTS. heavy duty vehicles

LUBRICANTS. heavy duty vehicles LUBRICANTS heavy duty vehicles TABLE OF CONTENTS 4 DIESEL TURBO VHPD 5W30 4 DIESEL TURBO UHPD MID SAPS 10W40 5 DIESEL TURBO UHPD 10W40 5 DIESEL TURBO THPD MID SAPS 15W40 6 DIESEL TURBO THPD 10W40 6 DIESEL

More information

HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF

HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF HAVOLINE FULL SYNTHETIC MULTI-VEHICLE ATF PRODUCT DESCRIPTION Havoline Full Synthetic Multi-Vehicle ATF is a premium quality synthetic transmission fluid that is recommended for most modern 6+ speed automatic

More information

GREATER EFFICIENCY FOR YOUR BUSINESS

GREATER EFFICIENCY FOR YOUR BUSINESS GREATER EFFICIENCY FOR YOUR BUSINESS Commercial Heavy Duty On-Highway Lubricants CITGO Lubricants Deliver More Value to Business Your world is always asking you to do more often lots more with less. Businesses

More information

P R O D U C T C ATA L O G U E

P R O D U C T C ATA L O G U E CATALOGUE COMPANY CULTURE International Lubricant Company was established to meet the demand for providing more energy efficient and dynamic lubricant products required by Original Equipment Manufacturers

More information

Standards, Specifications and Classifications of Lubricants

Standards, Specifications and Classifications of Lubricants STANDARDS, SPECIFICATIONS AND CLASSIFICATIONS OF LUBRICANTS The most important function of lubricants is the reduction of friction and wear and the relative movement of two bearing surfaces is only possible

More information

Product by Singapore CO-OWNED BY

Product by Singapore CO-OWNED BY Product by Singapore Our full range of lubricants are blended using base oils from new refineries and high tech additives to exceed industry performance standards. CO-OWNED BY About Us HydroPure lubricants

More information

Motor Homes. Power Protection Fuel Economy ACCESSORY PRODUCTS SYNTHETIC MOTOR OILS

Motor Homes. Power Protection Fuel Economy ACCESSORY PRODUCTS SYNTHETIC MOTOR OILS Motor Homes SYNTHETIC MOTOR OILS ACCESSORY PRODUCTS Power Protection Fuel Economy When you put the best into your motor home, you can expect the best from it. AMSOIL-engineered lubricants help protect

More information

Product Recommendation and Drain Interval Chart

Product Recommendation and Drain Interval Chart Product Recommendation and Drain Interval Chart AMSOIL Synthetic Motor Oil Maxim Recommendations are for whichever comes first, mileage or time. Normal: Up to 35,000 miles or 1 year. Severe: Up to 17,500

More information

Lubricant Viscosities

Lubricant Viscosities Page 1 of 5 Shutdown SIS Previous Screen Product: TRUCK Model: 793C TRUCK ATY Configuration: 793C Off-Highway Truck ATY00001-UP (MACHINE) POWERED BY 3516 Engine Operation and Maintenance Manual 793C Off-Highway

More information

Heavy-Duty Off-Road. AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment.

Heavy-Duty Off-Road. AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment. Heavy-Duty Off-Road SYNTHETIC DIESEL OILS SYNTHETIC HYDRAULIC FLUIDS FUEL ADDITIVES AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment.

More information

Heavy-Duty Off-Road. AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment.

Heavy-Duty Off-Road. AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment. Heavy-Duty Off-Road SYNTHETIC DIESEL OILS SYNTHETIC HYDRAULIC FLUIDS FUEL ADDITIVES AMSOIL synthetic lubricants provide maximum protection and performance in all types of heavyduty off-road equipment.

More information

Adding Value To Oil. Automotive Lubricant Oils & Grease Industrial & Marine Lubricant Oils Base Oil & Additives + YEARS OF MANUFACTURING

Adding Value To Oil. Automotive Lubricant Oils & Grease Industrial & Marine Lubricant Oils Base Oil & Additives + YEARS OF MANUFACTURING R 25 + YEARS OF MANUFACTURING Adding Value To Oil Automotive Lubricant Oils & Grease Industrial & Marine Lubricant Oils Base Oil & Additives Manufacturing Plant-1: 50,000 MT Annual Capacity Manufacturing

More information

HEAVY DUTY CK-4 DIESEL OILS

HEAVY DUTY CK-4 DIESEL OILS HEAVY DUTY TRUCK OILS HEAVY DUTY CK-4 DIESEL OILS CK-4 is available in Synthetic Blend and Petroleum Longer engine life Extended oil changes Lower soot levels Less filter maintenance Less oxidation Lower

More information

General 1. Lubricants CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS

General 1. Lubricants CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS General 1 CASE IH HY-TRAN ULTRA (MS1209) HYDRAULIC/TRANSMISSION FLUIDS FOR CASE, INTERNATIONAL HARVESTER & CASE IH EQUIPMENT Case IH Hy-Tran Ultra will absorb at least 1% water and still remain stable

More information

Hydraulic Fluids. Castrol Dual Range HV C 14. Product Data. Stay-in-Grade Performance. Water Tolerance. Thermal Stability.

Hydraulic Fluids. Castrol Dual Range HV C 14. Product Data. Stay-in-Grade Performance. Water Tolerance. Thermal Stability. C 14 Stay-in-Grade Performance The shear stable polymers in keep the fluid s viscosity consistent over a wide range of temperatures. High operating temperatures, which may break down other hydraulic oils

More information

Specialty Industrial Lubricants

Specialty Industrial Lubricants Specialty Industrial Lubricants Since 1958, The Orelube Corporation has manufactured and marketed Specialty Lubricating Oils & Greases for Industrial applications worldwide. From synthetic base fluids

More information

Introducing Shell Rotella

Introducing Shell Rotella Introducing Shell Rotella Heavy Duty Engine Oils DESIGNED TO MEET CHALLENGES WHATEVER YOUR BUSINESS, SHELL ROTELLA ADAPTS You need to know your oil will protect your engine under all conditions. No matter

More information

Diesel Power. Advanced synthetic technology to protect today s most demanding diesels. SYNTHETIC DIESEL OILS. FuEL.

Diesel Power. Advanced synthetic technology to protect today s most demanding diesels. SYNTHETIC DIESEL OILS. FuEL. Diesel Power SYNTHETIC DIESEL OILS DrIvETraIN FLuIDS FuEL additives Advanced synthetic technology to protect today s most demanding diesels. Synthetic Diesel Oils AMSOIL introduced the world s first synthetic

More information

DELO 400 HEAVY-DUTY ENGINE OIL

DELO 400 HEAVY-DUTY ENGINE OIL November 2016 DELO 400 HEAVY-DUTY ENGINE OIL Product Offering, Application and Competitive Comparison DELO HEAVY-DUTY ENGINE OIL DELIVERS LARGEST FIELD TEST PROGRAM IN CHEVRON HISTORY HIGH SYNTHETICS Delo

More information