IDC5 software update OHW

Transcription

1 IDC5 software update OHW

2 IDC5 software update OHW Starting from this version, the OHW software includes new important diagnostic developments able to support all TEXA mechanics, here below the details of these two new functions: Furthermore, starting from this update, two new features have been added that will simplify daily work even more: New software section Actions on the vehicle The section Actions on the vehicle has been added for all makes and models to speed up the selection of adjustments, activations and maintenance resets. The section is divided in 3 macro-families: Vehicle Maintenance, Adjustments and Coding, Activation Tests. New vehicle category subdivision Once you have accessed diagnosis, the vehicle categories on which you can operate will be the following: Agricultural Vehicles, Construction Vehicles & Special Vehicles, Crane Truck & Container Vehicles, Industrial Engines.

3 Further new features A new SCR/DPF after-treatment system has been added, dedicated only to the emission control systems, which are therefore separated from the injection control systems as before. Direct access to the manual calibration procedures has been made available while in serial diagnostic communication with the system being tested. New diagnostic features Below is a list that examines some of the new features available starting from this OFF-HIGHWAY version, dedicated to the most important makes in the industry. Agricultural vehicles The item Tractor has been deleted from the models of all makes, to make vehicle selection quicker and more intuitive. NEW HOLLAND - TGS3s System Scan has been added - The new Tier 4 Interim models have been updated and developed, in particular: T4 Series; T4000N/4000v Series; T5 Series; T6 Series; T7 Series; T7000 Series; T8 Series; Workmaster Series; Combine harvester CR & CX series. - The Component replacement adjustments and additional SCR tests have been developed for Tier4i and Tier4F platforms. CASE Ih - TGS3s System Scan has been added - The new Tier 4 Interim models have been updated and developed, in particular: Farmall Series: A Series, C Series, U Series, U Pro Series. CS Pro Series; Magnum Series; Maxxum Series; Combine harvester Axial Flow 5130/6130/7130 Sprayer 30 Series; Quantum V/N/F Series; - The Component replacement adjustments and additional SCR tests have been developed for Tier4i and Tier4F platforms. STEYR - TGS3s System Scan has been added - The new Tier 4 Interim models have been updated and developed, in particular: Kompakt S series; Multi. - The Component replacement adjustments and additional SCR tests have been developed for Tier4i and Tier4F platforms. CNH GROUP - The model selection has been simplified with the automatic vehicle detection. - The Manual Calibration sheets have been updated to the latest version for the CNH group (New Holland, Case ih, Steyr). JOHN DEERE - The accuracy adjustments for the PTQ transmission have been developed for the 6R 6RC 6M 6MC 7R models: PTQ 040 Forward clutch filling pressure; PTQ 041 Reverse clutch filling pressure; PTQ 042 Forward clutch filling time; PTQ 043 Reverse clutch filling time. - A data sheet link has been added to the EPC transmission accuracy adjustment page in the xx20 and xx30 Series models: EPC 040 Forward gear filling pressure; EPC 041 Reverse brake filling pressure;

4 EPC 042 Forward gear filling time; EPC 043 Reverse brake filling time. - Special parameterisations have been developed for the HCC Linkage and PTQ Transmission in Series 30, Series 6R and 7R. Strike. - The following have been developed for the R8 R6 Series with Power Shuttle transmission: Calibration of the clutch pedal; Calibration of the main clutch contact pressure. SAME - Complete Vehicle Diagnosis for all the models; - The control unit scan has been improved. - New FARMotion engine type has been developed for the following models: Dorado; Explorer; Frutteto. - The following have been developed for the Iron, Diamond and Iron 210 Series models with Power Shuttle transmission: Calibration of the clutch pedal; Calibration of the main clutch contact pressure. DEUTZ FAHR - Complete Vehicle Diagnosis for all the models; - The control unit scan has been improved; - New FARMotion engine type has been developed for the following models: 5DF Series; 5DS Series; 5DV Series; 5G Series. - The following have been developed for Agrotron TTV, Agrotron K, Agrotron M, Agrotron X Series with Power Shuttle transmission: Calibration of the clutch pedal; Calibration of the main clutch contact pressure. LAMBORGHINI - Complete Vehicle Diagnosis for all the models; - The control unit scan has been improved; - New FARMotion engine type has been developed for the following models: Spire F; Spire S; Spire V; HURLIMANN - The following have been developed for the XM XL Series with Power Shuttle transmission: Calibration of the clutch pedal; Calibration of the main clutch contact pressure. FENDT - New 500 Vario Series Tier 4 Final (S4) model has been developed: Complete Vehicle Diagnosis: maintenance reset and error code clearing have been developed. Diesel injection (Deutz EMR 4); Hydraulic control valves (Bosch Rexroth). - New 700 Vario Series Tier 4 Final (S4) model has been developed: Complete Vehicle Diagnosis: maintenance reset and error code clearing have been developed. Diesel injection (Deutz EMR 4); Hydraulic control valves (Bosch Rexroth). - New 800 Vario Series Tier 4 Final (S4) model has been developed: Complete Vehicle Diagnosis: maintenance reset and error code clearing have been developed. Diesel injection (Deutz EMR 4); Hydraulic control valves (Bosch Rexroth). - New 900 Vario Series Tier 4 Final (S4) model has been developed: Complete Vehicle Diagnosis: maintenance reset and error code clearing have been developed. Diesel injection (Deutz EMR 4); Hydraulic control valves (Bosch Rexroth). - New 1000 Vario Series Tier 4 Final (S4) model has been developed: Diesel injection (Man Bosch EDC 17); - The following have been developed for the Tier 3 (COM III) and Tier 4 interim (st 3b) models Complete Vehicle Diagnosis: error code clearing.

5 Hydraulic control valves (Bosch Rexroth). Construction vehicles & special vehicles New Start-up adjustment has been updated for the SCR system. INDUSTRIAL ENGINES VOLVO CE - Loader L Series o (GPMECU) General Purpose Machine Electronic Control Unit 3 transmission: Transmission error list has been updated. CASE - The following have been developed for Skid Steer SR & SV Series: Cummins T4 Final diesel injection with SCR Cummins T4 Final diesel injection with DPF + SCR FPT T4 Interim diesel injection with DPF FPT T4 Interim diesel injection with SCR. NEW HOLLAND - The following have been developed for Skid Steer 200 Series: Cummins T4 Final diesel injection with SCR Cummins T4 Final diesel injection with DPF + SCR FPT T4 Interim diesel injection with DPF FPT T4 Interim diesel injection with SCR - New Backhoe B Series Tier 4 Interim model has been added: Diesel injection; Instrument panel; Transmission. PRINOTH - New Prinoth selection has been added and developed with the following models: Beast; Bison; Everest; Husky; Leitwolf; Leitwolf Agripower; Trooper. KASSBHORER GELANDEFAHRZEUGE For the vehicles equipped with Mercedes-Benz (ADM 2 Adaptation Module) engine type: MERCEDES-BENZ - Vehicle engine control has been added: ADM 1 Adaptation module; ADM 2 Adaptation module; ADM 3 Adaptation module. WIRING DIAGRAMS FENDT - Diagrams have been developed for the 200 Vario series models (COMIII): SISU Tier3 diesel injection; (*) Automatic transmission; (*) Rear linkage; (*) Front lift axle; (*) Power take-off; LANDINI - Diagrams have been developed for the Rex Series models: Perkins Tier0 diesel injection; (*) Perkins Tier2 diesel injection; (*) Perkins Tier3 diesel injection; (*) McCORMICK - Diagrams have been developed for the F Series models: Perkins Tier0 diesel injection; (*) Perkins Tier2 diesel injection; (*) Perkins Tier3 diesel injection; (*) NEW HOLLAND - Diagrams have been developed for the T6 Tier4Final Autocommand CVT models: Diesel injection; (*) Automatic transmission; (*) - Error-diagram link has been developed for all the existing wiring diagrams: Diesel injection; Automatic transmission;

6 JOHN DEERE - Error-diagram link has been developed for the following wiring diagrams: Diesel injection; Automatic transmission; Rear linkage; Front lift axle. - Component images have been added for models 6R and 7R: Diesel injection; BOBCAT - Diagrams have been developed for Skid Steer S & T models: Bobcat D24 and D34 diesel injection; (*) Kubota V2203, V2403, V3800 diesel injection; (*) Gateway; Automatic A/C system. - Diagrams have been developed for the Excavator E Series: Kubota D1803, V2403 diesel injection; (*) - Diagrams have been developed for the Telescopic lifter T Series: Deutz diesel injection; (*) Perkins diesel injection; (*) CUMMINS - General diagrams have been developed: QSB6.7L CM2150 diesel injection; (*) QSB6.7L CM2250 diesel injection; (*) WABCO - General diagrams have been developed: ABS D Basic. TEREX/DEMAG, LIEBHERR, GROVE, TADANO FAUN - Extension of diagrams for various models by system: Diesel injection; ABS; Automatic transmission; Engine vehicle control; Retarder. ALL MAKES - After-treatment diagrams have been moved from the diesel injection system (IND) to the SCR/DPF after-treatment system (SDA); - Association of generic data sheets for all the existing diagrams. (*) systems with direct connection between the errors and the related system wiring diagrams. DASHBOARD CNH (CASE, NEW HOLLAND, STEYR) Dashboards have been added for Powershift and CVT, Power Command, Range Command automatic transmission systems; Dashboards have been added for the rear linkage system. FENDT - Tier 3 (COM III), Tier 4 Interim (st 3b), Tier 4 Final (S4): Dashboard has been added for Bosch Rexroth hydraulic control valve system. DEUTZ-FAHR - Agrotron K Series, M Series, TTV Series, X Series: Dashboard has been added for ZF PowerShuttle automatic transmission system. SAME - Diamond Series, Iron 210 Series, Iron Series: Dashboard has been added for ZF PowerShuttle automatic transmission system. VOLVO CE - Dumper A Series, Loader L Series, Excavator E Series Dashboards have been added for the injection system; Dashboards have been added for the DEF system.

7

8

9 For further details on these functions and on their applicability to vehicles, visit:

10 Extended coverage of makes - Version 17 AGRI AGRICULTURE TRAILER BELARUS BUHLER VERSATILE CARRARO CASE ih CATERPILLAR CHALLENGER CLAAS DEUTZ - FAHR DIECI ENERGREEN FARESIN FENDT FRANZ KLEINE HURLIMANN JCB JLG JOHN DEERE KAMAZ KRONE KUBOTA LAMBORGHINI LANDINI LAVERDA LINDNER MAC DON MANITOU MASSEY FERGUSON McCORMICK MERLO NEW HOLLAND RENAULT AGRICULTURE ROPA SAME STEYR URSUS VALTRA CONSTRUCTION AEBI ASTRA ATLAS COPCO BELL BOBCAT BOMAG CARRARO CASE CATERPILLAR DOOSAN FIAT-KOBELCO HAMM HITACHI (Fiat-Hitachi) HYUNDAI CE JCB JOHN DEERE CE KÄSSBOHRER GELÄNDEFAHR- ZEUGE KOBELCO KOMATSU KRAMER KUBOTA LINK-BELT MERLO NEW HOLLAND O&K PERLINI PETTIBONE PRINOTH RANDON SANDVIK SUNWARD TAKEUCHI TEREX TEREX TRUCKS TIGERCAT VOLVO CE WACKER NEUSON XTREME CRANE TRUCK/ CONTAINER TRUCK COMETTO CVS FERRARI FANTUZZI GROVE HYSTER HYUNDAI KALMAR LIEBHERR LINDE OTO TADANO TERBERG TEREX/DEMAG INDUSTRIAL ENGINES MARCA CATERPILLAR CUMMINS DETROIT DEUTZ FPT (IVECO MOTORS) ISUZU JOHN DEERE KOHLER KUBOTA MERCEDES-BENZ MTU MWM PERKINS SCANIA SISU VM MOTORI VOLVO PENTA LEGEND Brands that offer updates in this version Brands that do not offer updates in this version FACEBOOK.COM/CUTTINGEAUTOMOTIVESOLUTIONSLLC YOUTUBE.COM/CUTTINGEDGEAUTOMOTIVESOLUTIONS TWITTER.COM/EDGEDIAGNOSTICS INSTAGRAM.COM/CUTTINGEDGEAUTOMOTIVE18 To check out the extensive coverage of TEXA products, go to: WARNING The trademarks and logos of vehicle manufacturers in this document have been used exclusively for information purposes and are used to clarify the compatibility of TEXA products with the models of vehicles identified by the trademarks and logos. Because TEXA products and software are subject to continuous developments and updates, upon reading this document they may not be able to carry out the DIAGNOSTICS of all the models and electronic systems of each vehicle manufacturer mentioned within this document. References to the makes, models and electronic systems within this document must therefore be considered purely indicative and TEXA recommends to always check the list of the Systems that can be diagnosed of the product and/or software at TEXA authorized retailers before any purchase. The images and the vehicle outlines within this document have been included for the sole purpose of making it easier to identify the vehicle category (car, truck, motorbike, etc.) for which the TEXA product and/or software is intended. The data, descriptions and illustrations may change compared to those described in this document. TEXA S.p.A. reserves the right to make changes to its products without prior notice. The BLUETOOTH brand is the property of Bluetooth SIG, Inc., U.S.A., and is used by TEXA S.p.A. under license. Android is a trademark of Google Inc Copyright TEXA S.p.A. 03/ NA Cutting Edge Automotive US HWY 98 Foley, Alabama (855)