Item Description Page. Halogen-free single conductor with improved fire performance and extended temperature range 300/500 V, CE...
|
|
- Allan McDonald
- 5 years ago
- Views:
Transcription
1 Halogen-free ables Web site:
2 Item Description Page hapter Halogen-free single A A 146 FRN A A 156 FRN Halogen-free single conductor with improved fire performance and extended temperature range 00/500 V, E Halogen-free single conductor with improved fire performance and extended temperature range 450/750 V, E A A 166 FRN Halogen-free single conductor with improved fire performance and extended temperature range 0.6/1 kv, E A A 147 FRN Halogen-free single conductor 600 V, UL, E A A 157 FRN Halogen-free single conductor 1000 V, UL, E A A 170 TWÖ Halogen-free flexible Thin-wall single conductor - space and saving 00 V acc. to EN , E A A 100 HT A A 101 HT Halogen-free high temperature resistant single conductor with nickel-plated strands, E Halogen-free high temperature resistant single conductor with silver-plated strands, E Halogen-free control s 2 A A 200 FRN A A 205 FRN A A 28 FRN A A 260 PUR A A 10 HT Halogen-free control with numbered conductor, improved fire performance and extended temperature range, E Halogen-free control with colored, improved fire performance and extended temperature range, E Halogen-free control with numbered, overall tinned copper screen, improved fire performance and extended temperature range, E Halogen-free cold-flexible, oil resistant control with numbered, E Halogen-free high temperature resistant control with numbered or colored, E Halogen-free control s with UL recognition, SA approval A 625 FRN M Halogen-free control with numbered, UL, SA, E A 625 S FRN M Halogen-free control with numbered and overall tinned copper screen, UL, SA, E A 625 SH FRN M Halogen-free control with numbered, inner jacket and overall tinned copper screen, UL, SA, E : especially for use in rail vehicles info@sab.com Web site:
3 Item Description Page hapter Halogen-free motor connection s 0.6/1 kv A A 810 FRN A A 812 FRN Halogen-free data s Halogen-free motor connection with numbered, improved fire performance and extended temperature range, E Halogen-free motor connection with numbered, improved fire performance, inner jacket, overall tinned copper screen and extended temperature range, E A D 05 FRN A D 15 FRN A D 45 FRN TP Halogen-free flexible data with improved fire performance and extended temperature range, E Halogen-free flexible data with improved fire performance, overall tinned copper screen and extended temperature range, E Halogen-free paired data with improved fire performance, overall tinned copper screen and extended temperature range, E... 5 Halogen-free s especially for use in rail vehicles A A 871 TWÖ A A 872 TWÖ A A 876 TWÖ TP A R 600 FRN A R 68 FRN Halogen-free Thin-wall connection and data, construction with reference to EN 5006, E Halogen-free Thin-wall connection and data with overall tinned copper screen, construction with reference to EN 5006, E Halogen-free paired Thin-wall connection and data with overall tinned copper screen, construction with reference to EN 5006, E.. 8 S Rail ontrol with numbered, tested acc. to DIN EN , E S Rail ontrol with numbered and overall tinned copper screen, tested acc. to DIN EN , E 41 A R 605 FRN S Rail Data, tested acc. to DIN EN , E A R 615 FRN A R 645 FRN TP A A 280 FRN X A A 285 FRN X S Rail Data with overall tinned copper screen, tested acc. to DIN EN , E S Rail Data, paired with overall tinned copper screen, tested acc. to DIN EN , E Halogen-free control with numbered, cross linked type tested acc. to DIN EN , E ontrol with numbered and overall tinned copper, screen cross linked type tested acc. to DIN EN , E : especially for use in rail vehicles info@sab.com Web site:
4 Item Description Page hapter L BlueLine - Halogen-free s for maritime use A BL 405 FRN Halogen-free flexible data, ABS, GL, LR, RINA, E A BL 415 FRN Halogen-free flexible data with overall tinned copper screen, ABS, GL, LR, RINA, E A BL 445 FRN TP Halogen-free paired data with overall tinned copper screen, ABS, GL, LR, RINA, E A BL 400 FRN Halogen-free flexible control 00/500 V, ABS, GL, LR, RINA, E 52 A BL 48 FRN Halogen-free flexible control with overall tinned copper screen 00/500 V, ABS, GL, LR, RINA, E. 5 A BL 410 FRN Halogen-free flexible power 0,6/1 kv, ABS, GL, LR, RINA, E.. 54 A BL 412 FRN Halogen-free flexible power with overall tinned copper screen 0,6/1 kv, ABS, GL, LR, RINA, E L Ultra - ontinuous flex with higher fire protection A SD 705 ontinuous flex data with FRN 1 extended temperature range and higher fire protection, E A S 710 ontinuous flex control with FRN 1 extended temperature range and higher fire protection, E A SD 715 ontinuous flex shielded data with FRN 1 extended temperature range and higher fire protection, E A S 712 ontinuous flex shielded control with FRN 1 extended temperature range and higher fire protection, E A SD 745 ontinuous flex shielded twisted pairs data with FRN 1 TP extended temperature range and higher fire protection, E : especially for use in shipbuilding industry NEW NEW NEW NEW NEW info@sab.com Web site:
5 HALOGEN-FREE ABLES Applications n Application of single and wiring s These single are installed in applications where high flex s are required. The various versions of these s offer excellent characteristics such as oil resistance, low temperature flexibility, heat resistance, hot-air resistance, weather resistance and are. Exemplary applications: A 146 FRN A 156 FRN A 170 TWÖ A 166 FRN A 147 FRN A 157 FRN A 100 HT A 101 HT Production of control cabinets, appliances and devices for communication technologies, household appliances, construction of generators and transformers, machine construction, railway technologies: furthermore, the FRN type is particularly suitable for internal wiring of rail vehicles Internal wiring at high ambient temperatures in protected rooms n Application of control and connection s These s are particularly suitable for control panels at tool working machines, assembly lines, transporting systems, production lines, rail technologies etc. Once installed these s can be moved easily for installation and adjustment as well as inspection of machines. Note: ables can not be mechanically overloaded during the movement. If a certain protection against electromagnetic interferences is requested, s with an overall tinned copper screen should be used. The excellent characteristics of X s, in various versions are oil resistance, low temperature flexibility, heat resistance, hot-air resistance, weather resistance, and are also. Exemplary applications: A 200 FRN A 205 FRN A 28 FRN A 260 PUR A 10 HT A 810 FRN A 812 FRN 625 FRN M 625 S FRN M 625 SH FRN M Automation systems, car manufacturing industry, machine construction, railway technologies Transporting systems, construction of industrial plants, automation technologies Automation technologies, steel and iron industries, car manufacturing industry, machine construction, refrigeration and climate technologies, car wash, rising platforms for trucks Plastics processing, packaging machine construction, smelters, steelworks and hot rolling mills, safety engineering, processing of cement, glass and ceramics, sauna construction, heat, refrigeration and climate technologies Automation technologies, car manufacturing industry, machine construction, power supply between frequency converter and servo motor Automation technologies, car manufacturing industry, machine construction, railway technologies Transporting systems, construction of industrial plants, automation technologies 5 info@sab.com Web site:
6 HALOGEN-FREE ABLES Applications n Application of data s Data s are used for the transmission of signals, measuring values and control signals in electronic control appliances, data processing systems, railway technologies, weighing installations, office appliances or wherever small cross sections, bending radii, shielding or high flexibility is demanded. The excellent characteristics of these s, in various versions are oil resistance, low temperature flexibility, heat resistance, weather resistance, flexibility and being. Exemplary applications: D 05 FRN D 15 FRN D 45 FRN TP A 871 TWÖ A 872 TWÖ A 876 TWÖ TP ommunication technologies Electronic data processing systems, weighing installations, office appliances Electronic data processing systems, weighing installations, office appliances, for increased requirements on transmission characteristics and near-end cross talk attenuation ables for internal wiring of rail vehicles acc. to EN 5006, data transmission, information systems n Application of Rail Data and Rail ontrol tested acc. to DIN EN In sensitive areas, such as in public buildings and facilities and rail vehicles, the requirements for the protection of the general security are very high. In addition, s must be flame-retardant and self extinguishing and must not contribute to fire propagation. All of these characteristics, can be found in our brand name of X. Our X Rail ables meet the highest safety standards according to DIN EN , and are certified by the Fire Technology Laboratory urrenta GmbH. Exemplary applications: R 600 FRN ables for internal wiring of rail vehicles acc. to DIN EN R 68 FRN R 605 FRN R 615 FRN R 645 FRN TP A 280 FRN X A 285 FRN X 6 n Application of BlueLine data, control and power s for shipbuilding The development of the new BlueLine series has been achieved with co-operation from our customers coming from the shipbuilding field. The new s are available as X BlueLine s. All X BlueLine types are constructed with tinned copper strands in class 5 in order to offer advantages in corrosion resistance and flexibility. The halogenfree X BlueLine s have been approved by GL, LR as well as ABS. Their X characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type X BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. The types X BlueLine ontrol as well as X BlueLine Power complement the new product series with control and power supply s for electrical components. Exemplary applications: BL 405 FRN BL 415 FRN BL 445 FRN TP BL 400 FRN BL 48 FRN BL 410 FRN BL 412 FRN Installation and wiring of navigation and bridge electronics as BNWAS, power supply of electrical components info@sab.com Web site:
7 HALOGEN-FREE ABLES Applications n Application of - continuous flex with higher fire protection Fire protection,, flexibility and oil resistance are the characteristics united by our new product range X Ultra. Due to the new jacket material, the can be used for flexible applications and shows the highest fire protection features by the standards EN , EN 602- at or D, IE , IE , EN 6104, NF , NF X Exemplary applications: SD 705 FRN 1 as festoon for polar cranes in nuclear power plants, in rail technology SD 715 FRN 1 as sensor at the vehicle chassis, SD 745 FRN 1 TP chain applications with moderate mechanical stress S 710 FRN 1 S 712 FRN 1 as festoon for polar cranes in nuclear power plants, in rail technology as sensor at the vehicle chassis or as flexible control at the train doors, chain applications with moderate mechanical stress s can be fully recycled and in separate components newly supplied to the resource cycle. ables with FRN outer jacket avoid flame propagation in case of local flaming and are flame retardant and self-extinguishing acc. to VDE, EN and IE. They fulfil the smoke density acc. to IE, EN, VDE and BS. 7 info@sab.com Web site:
8 HALOGEN-FREE ABLES Selection index Basic construction static* Voltage Standards able type A A 146 FRN A A 156 FRN A A 166 FRN A A 147 FRN A A 157 FRN A A 170 TWÖ A A 100 HT A A 101 HT A A 200 FRN A A 205 FRN A A 28 RN A A 260 PUR A A 10 HT 8 Special features Single x x x x x x x x Numbered conductrors x x x x olored conductrors x x Screened Inner jacket Twisted pairs Nominal voltage 600 V (UL) Nominal voltage 1000 V (UL) Nominal voltage Uo 00 V Nominal voltage Uo/U 00/500 V x x x x x x x x x Nominal voltage Uo/U 450/750 V x x Nominal voltage Uo/U 0,6/1 kv Data peak operating voltage max. 50 V or max. 500 V Testing voltage 800 V or 1200 V x Testing voltage 2000 V x x x x Testing voltage 2500 V x Testing voltage 000 V x x x x x Testing voltage 4000 V Burning characteristics: flame retardant and self-extinguishing acc. to x x x x x x x x x x x IE and EN No flame propagation acc. to x x x x x x x x IE 602 and EN 602 cat. resp. D Fire protection class 1-4 acc. to DIN 5510 part 1 Smoke density acc. to IE x x x x x x x x EN 6104 UL acc. to AWM Style Thin-wall/small outer diameter Very good oil resistance acc. to DINVDE Oil resistant acc. to EN 5006 Good chemical resistance Ozone resistant acc. to VDE 0282 part 2 Flexibility x x x x x x x x x x x x Weather resistance x x x x x x x x x Valid for all herein mentioned s: acc. to DINVDE 0472 part 815 and IE orrosiveness of conflagration gases acc. to IE EN VDE 0482 part x x x x x x x x x : from *The temperature range for flexing is mentioned on the particular catalog page to info@sab.com Web site:
9 HALOGEN-FREE ABLES Selection index Basic construction static* Voltage Standards able type A 625 FRN M A 625 S FRN M A 625 SH FRN M A A 810 FRN A A 812 FRN A D 05 FRN A D 15 FRN A D 45 FRN TP A A 871 TWÖ A A 872 TWÖ A A 876 TWÖ TP Special features Single Numbered conductrors x x x x x x x x olored conductrors x x x Screened x x x x x x x Inner jacket x x Twisted pairs x x Nominal voltage 600 V (UL) x x x Nominal voltage 1000 V (UL) Nominal voltage Uo 00 V Nominal voltage Uo/U 00/500 V x x x x x x Nominal voltage Uo/U 450/750 V Nominal voltage Uo/U 0,6/1 kv x x Data peak operating voltage x x x max. 50 V or max. 500 V Testing voltage 800 V or 1200 V x x x Testing voltage 2000 V x x x Testing voltage 2500 V Testing voltage 000 V x x x Testing voltage 4000 V x x Burning characteristics: flame retardant and self-extinguishing acc. to x x x x x x x x x x x IE and EN No flame propagation acc. to x x x x x x x x x x x IE 602 and EN 602 cat. resp. D Fire protection class 1-4 acc. x x x to DIN 5510 part 1 Smoke density acc. to IE x x x x x x x x x x x EN 6104 UL acc. to AWM Style x x x Thin-wall/small outer diameter x x x Very good oil resistance acc. to DINVDE Oil resistant acc. to EN 5006 x x x Good chemical resistance Ozone resistant acc. to VDE 0282 part 2 x x x Flexibility x x x x x x x x x x x Weather resistance x x Valid for all herein mentioned s: acc. to DINVDE 0472 part 815 and IE orrosiveness of conflagration gases acc. to IE EN VDE 0482 part : from *The temperature range for flexing is mentioned on the particular catalog page to info@sab.com Web site:
10 HALOGEN-FREE ABLES Selection index ables for railway technology ables for shipbuilding able type Applications Standards Temperature range fixed laying* Voltage Halogen-free Burning characteristics A R 600 FRN A R 68 FRN A R 605 FRN A R 615 FRN A R 645 FRN TP A A 280 FRN X A A 285 FRN X able type A BL 405 FRN A BL 415 FRN A BL 445 FRN TP A BL 400 FRN A BL 48 FRN A BL 410 FRN A BL 412 FRN 10 Wiring Data x x x ontrol x x x x Screened x x x x ross linked type x x Tested acc. to DIN EN x x x x x x x acc. to EN EN are fulfilled. Development of Hl is < 0,5% acc. to DIN EN ph-value is > 4, acc. to DIN EN x x x x x x x onductivity is < 10,0 µs/mm acc. to DIN EN Fluoric content < 0,1% acc. to DIN EN No flame propagation x x x x x x x acc. to DIN EN No flame propagation acc. to DIN EN resp. x x x x x x x DIN EN 5005 section No flame propagation acc. to DIN EN 5005 x x x x x x x section Flame retardant and self-extinguishing x x x x x x x acc. to DIN EN Flame retardant acc. to x x x ISO 6722 (UN/EE R118) Burning tests x x acc. to ASTM E Toxicity acc. to DIN EN 5005 x x x x x x x Smoke density x x x x x x x acc. to DIN EN 6104 Smoke density x x acc. to ASTM E harmful substances acc. to RoHS x x x x x x x directive of the European Union Nominal voltage Uo/U 00/500 V x x x x Peak operating voltage: < 24 AWG = max. 50 V x x x 24 AWG = max. 500 V x onstruction Temperature range fixed laying* Voltage range Standards Type approvals haracteristics : from to Data x x x ontrol x x Power x x Screened x x x x Peak operating voltage max. 50 V x x x Nominal voltage Uo/U 00/500 V x x Nominal voltage Uo/U 600/1000 V x x Halogen-free acc. to IE EN x x x x x x x Flame retardant and self-extinguishing acc. to IE x x x x x x x + EN No flame propagation acc. to IE x x x x x x x DIN EN Smoke density acc. to IE EN 6104 x x x x x x x orrosiveness of conflagration gases IE x x x x x x x DIN EN Germanischer Lloyd x x x x x x x Lloyd s Register x x x x x x x American Bureau of Shipping x x x x x x x Registro Italiano Navale x x x x x x x Flexible conductor stranding x x x x x x x Extended cross section range x x x *The temperature range for flexing is mentioned on the particular catalog page info@sab.com Web site:
11 HALOGEN-FREE ABLES Selection index L Ultra - continuous flex with higher fire protection able type A SD 705 FRN 1 A S 710 FRN 1 A SD 715 FRN 1 A S 712 FRN 1 Application A SD 745 FRN 1 TP Temperature range static* Voltage haracteristics, standards and approvals Data s x x x ontrol s x x Screened x x x Twisted pairs x Peak operating voltage < 0,25 mm 2 = max. 50 V x x x 0,25 mm 2 = max. 500 V Nominal voltage 0,6/1 kv x x Halogen-free acc. to DIN VDE 0472 part 815 x x x x x + IE No flame propagation acc. to IE x x x x x EN 602 at or D Flame retardant and self-extinguishing acc. to IE EN x x x x x + NF orrosiveness of conflagration gases acc. to IE EN x x x x x + VDE 0482 part Smoke density acc. to IE EN 6104 x x x x x Toxicity acc. to NF X x x x x x Oil and fuel resistance acc. to EN x x x x x These pages are meant to be helpful for choosing s, they do not contain any guaranteed characteristics. Please also see the technical data on the particular catalog pages. 11 : from to *The temperature range for flexing is mentioned on the particular catalog page info@sab.com Web site:
12 On request with tinned copper strands HALOGEN-FREE ABLES A 146 FRN Wiring with improved fire performance and extended temperature range 00/500 V S BRÖSES D-VIERSEN XA146 FRN 00/500 V 0.5 mm2 Marking for XA 146 FRN : A BRÖSES D-VIERSEN XA146 FRN 00/500 V 0.5 mm 2 A A 146 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V : 7.5 x O.D. For one single bend: 0,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good mm 2 AWG * ( 16/2) * ( 2/2) * ( 0/2) * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow info@sab.com Web site:
13 HALOGEN-FREE ABLES A 156 FRN Wiring with improved fire performance and extended temperature range 450/750 V On request with tinned copper strands SBRÖSES D-VIERSEN XA156 FRN 450/750 V 1.5 m Marking for XA 156 FRN : A BRÖSES D-VIERSEN XA156 FRN 450/750 V 1.5 mm 2 A A 156 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 450/750 V Testing voltage: 2500 V : 7.5 x O.D. For one single bend: 0,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good mm 2 AWG MM * ( 27-29/0) * ( 46/0) * ( 52/28) * ( 78/28) * ( 77/26) * ( 122/26) * ( 190/26) * ( 272/26) * ( 400/26) * /0 ( 54/26) * /0 ( 484/24) * /0 ( 589/24) * ( 740/24) * ( 902/24) * ( 1220/24) * ( 1525/24) * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow info@sab.com Web site:
14 On request with tinned copper strands HALOGEN-FREE ABLES Wiring with improved fire performance A 166 FRN and extended temperature range 0.6/1 kv S BRÖSES D-VIERSEN XA166 FRN 0.6/1 kv 1.5 mm2 Marking for XA 166 FRN : A BRÖSES D-VIERSEN XA166 FRN 0.6/1 kv 1.5 mm 2 A A 166 FRN is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored very good stripping flexible Nominal voltage: Uo/U 0.6/1 kv Testing voltage: 000 V : 7.5 x O.D. For one single bend: 7,5 x O.D. fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good mm 2 AWG MM mm 2 AWG MM * ( 27-29/0) * ( 46/0) * ( 52/28) * ( 78/28) * ( 77/26) * ( 122/26) * ( 190/26) * ( 272/26) * ( 400/26) * /0 ( 54/26) * /0 ( 484/24) * /0 ( 589/24) * ( 740/24) * ( 902/24) * ( 1220/24) * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow info@sab.com Web site:
15 HALOGEN-FREE ABLES A 147 FRN Wiring 600 V A 157 FRN Wiring 1000V 00/500V 0.5 mm 2 20 AWG U AWM Style V E Marking for XA 147 FRN : A BRÖSES D-VIERSEN XA 147 FRN 00/500V 0.5 mm 2 20 AWG U AWM Style V E A A 147 FRN / A A 157 FRN is a, UL recognized single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored UL recognition Voltage UL: A147 FRN: A157 FRN: AWG: 16 AWG MM: 600 V 1000 V Nominal voltage Uo/U: A147 FRN: A157 FRN: AWG: 16 AWG MM: 00/500 V 450/750 V : 7.5 x O.D. For one single bend: 0,5 x O.D. DIN VDE: UL: up to +75 fixed installation: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good A 147 FRN mm 2 AWG MM * ( 16/2) * ( 2/2) * ( 0/2) * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow A 157 FRN mm 2 AWG MM * ( 27-29/0) * ( 46/0) * ( 52/28) * ( 78/28) * ( 77/26) * ( 122/26) * ( 190/26) * ( 272/26) * ( 400/26) * /0 ( 54/26) * /0 ( 484/24) * /0 ( 589/24) * MM ( 740/24) * MM ( 902/24) * MM ( 1220/24) * MM ( 1525/24) info@sab.com Web site:
16 Safety by standardized and controlled production HALOGEN-FREE ABLES A 170 TWÖ Flexible Thin-wall single conductor - space and saving ÖSES D-VIERSEN XA170 TWÖ EN V 1 x 0.5 mm 2 16 Marking for XA 170 TWÖ : A BRÖSES D-VIERSEN XA 170 TWÖ EN V 1 x 0.5 mm 2 A A 170 TWÖ is a single conductor for use in control cabinets, appliances and communication technologies, household appliances, generators and transformers, machine construction, railway technologies and other specific technologies. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: tinned copper strands, fine wires acc. to EN white flame retardant low smoke emission smallest outer-diameter space-saving installation light abrasion resistant surface standardized safety accomplishes the fire protection levels 1-4 acc. to DIN 5510 AWG min. nominal outer-ø max. nominal outer-ø ohmicresistance at 20 max. W/km /1c /1c /1c /1c /1c Especially for use in rail vehicles Nominal voltage Uo: 00 V Testing voltage: 4 kv : +105, with short circuit of 5 sec., +160 Test EN Requirements B results Voltage test 2000 Va.c., 5 min. passed 4800 Vd.c., 5 min. Dielectric 4000 V a.c. passed strength D..-voltage strength 00 Vd.c., 10 d / 85 passed current increase < 10% Insulation resistance 0.5 mm MW*km passed at 20 Insulation resistance 0.5 mm 2-0. MW*km passed at 90 Stripping easy passed of insulation Oil resistance no tears passed IRM 902 at 100 / 24h voltage test at 1.5 kv a.c. Fuel resistance no tears passed IRM 90 at 70 / 168h voltage test at 1.5 kv a.c. Resistance against acids no tears passed N-oxalic acid solution voltage test at 2 /168h at 1.5 kv a.c. Alkaline resistance no tears passed N-oxalic acid solution voltage test at 2 /168h at 1.5 kv a.c. Hot pressure resistance impression depth < 50%, impression depth 0% at 125 /4h voltage test passed at 1.5 kv a.c. Dynamic penetration test 0.5 mm 2 - load 70 N passed Resistance at -15 / h passed to tear propagation at +2 / h at +85 / h voltage test at 150 V a.c. Shrinking at 150 < 1.5 mm passed Blocking of at 150 / 6h passed no adhesion old at -40 passed bend test Abrasion resistance 0.5 mm 2 - load 7 N passed Elasticity passed Ozone resistance method B passed no tears voltage test at 1.5 kv a.c. Stress cracking 168 h at 180 passed resistance no tears voltage test at 1.5 kv a.c. Flame propagation flame effect 60 sec. passed at conductor fire trace: < 425 mm fire trace: 70 mm no afterflame period Flame propagation flame effect 20 min passed bundeled fire trace: < 1.5 m fire trace: 0,8 m no afterflame period Acidity ph min. 4, passed of corrosive gases conductivity max µs/mm Development hydrogen chloride max. 0.5%, passed of corrosive gases fluorine max. 0.1% Smoke density category 4 > 70% light transmission Ž 80% EN info@sab.com Web site:
17 temperature resistant up to HALOGEN-FREE ABLES A 100 HT with nickel-plated strands A 101 HT with silver-plated strands S High temperature resistant single conductor High temperature resistant single conductor BRÖSES D-VIERSEN XA100 HT 220 Marking for XA 100 HT : A BRÖSES D-VIERSEN XA100 HT 220 A A 100 HT / A A 101 HT are single conductor s. These s are especially made for use for internal wiring at high ambient temperatures in protected rooms. With the insulation, these s are useful for temperatures up to 220. onductor: olor code: A 100 HT: nickel-plated copper strands A 101 HT: silver-plated copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored high temperature resistant flexible A 101 HT: good solderability Nominal voltage: Testing voltage: : For one single bend: fixed installation: flexing: Uo/U 00/500 V 2000 V 7.5 x O.D. 0,5 x O.D. -40/ /+220 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part A 100 HT mm 2 AWG MM * ( 14/4) * ( 7/0) * ( 16/2) * ( 2/2) * ( 0/2) * ( 27-29/0) * ( 46/0) * ( 52/28) * ( 78/28) * ( 77/26) * ( 122/26) * ( 190/26) * ( 272/26) * ( 400/26) * /0 ( 54/26) * 95.0 /0 ( 484/24) * /0 ( 589/24) * ( 740/24) * ( 902/24) * ( 1220/24) * ( 1525/24) A 101 HT mm 2 AWG MM * ( 14/4) * ( 7/0) * ( 16/2) * ( 2/2) * ( 0/2) * ( 27-29/0) * ( 46/0) * ( 52/28) * ( 78/28) * ( 77/26) * ( 122/26) * ( 190/26) * ( 272/26) * ( 400/26) * /0 ( 54/26) * 95.0 /0 ( 484/24) * /0 ( 589/24) * ( 740/24) * ( 902/24) * ( 1220/24) * ( 1525/24) * olor code for single : 01 = black 06 = green 02 = blue 07 = violet 0 = brown 08 = white 04 = gray 16 = gentian blue 05 = yellow 27 = green-yellow info@sab.com Web site:
18 HALOGEN-FREE ABLES A 200 FRN ontrol with numbered, improved fire performance and extended temperature range ÖSES D-VIERSEN XA200 FRN 12 G 1.5 mm 2 Marking for XA 200 FRN : A BRÖSES D-VIERSEN XA200 FRN 12 G 1.5 mm 2 A A 200 FRN is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A gray very flexible very good stripping Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: 4 x O.D. free movement: 6 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm info@sab.com Web site:
19 HALOGEN-FREE ABLES A 205 FRN ontrol with colored and improved fire performance and extended temperature range BRÖSES D-VIERSEN XA205 FRN 5 G 1.5 mm 2 Marking for XA 205 FRN : A BRÖSES D-VIERSEN XA205 FRN 5 G 1.5 mm 2 A A 205 FRN is a, multi-conductor, flexible power and control designed with colored in acc. with HD 08 (VDE 029 part 08) for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A olor code: colored acc. to HD 08 (VDE 029 part 08); green-yellow earth wire from A gray very flexible very good stripping Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 Weather resistance: good good 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm AWG ( 400/26) mm info@sab.com Web site:
20 HALOGEN-FREE ABLES A 28 FRN ontrol with numbered, overall tinned copper screen improved fire performance and extended temperature range D-VIERSEN XA28 FRN 5 G 1.5 mm 2 Marking for XA 28 FRN : A BRÖSES D-VIERSEN XA28 FRN 5 G 1.5 mm 2 A A 28 FRN is a, tinned copper braid, multi-conductor, flexible control with a smaller OD for tighter installations designed for use in all electrical equipment in dry, damp and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembley lines, controls systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding A gray good EM characteristics* very good stripping * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: free movement: static: flexing: 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good Weather resistance: good AWG ( 16/2) 0.50 mm AWG ( 0/2) 1.00 mm AWG ( 46/0) 2.50 mm AWG ( 2/2) 0.75 mm AWG ( 27-29/0) 1.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm info@sab.com Web site:
21 HALOGEN-FREE ABLES A 260 PUR old-flexible, oil resistant control with numbered BRÖSES D-VIERSEN XA260 PUR 7 x Marking for XA 260 PUR : A BRÖSES D-VIERSEN XA260 PUR 7 G 1.5 mm 2 A A 260 PUR is a, multi-conductor, flexible power and control with a polyurethane outer jacket designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment. This has a very good resistance against acids, alkalines, solvents, hydraulic liquids and oil. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A - from 12 AWG PUR, TMPU acc. to DIN VDE 0282 part 10 + HD gray oil resistant flexible at low temperatures weather resistant Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: Radiation resistance: static: flexing: 4 x O.D. 6 x O.D. 5 x 10 7 cj/kg -50/+90-40/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Oil resistance: very good -TMPU acc. to DIN VDE 0282 part 10 + HD22.10 hemical resistance: Weather resistance: good against acids, alkalines, solvents, hydraulic liquids etc. very good good 19 AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm info@sab.com Web site:
22 temperature resistant up to HALOGEN-FREE ABLES A 10 HT High temperature resistant control with numbered or colored ÖSES D-VIERSEN XA10 HT 4 G 1.5 mm 2 Marking for XA 10 HT : A BRÖSES D-VIERSEN XA10 HT 4 G 1.5 mm 2 A A 10 HT is a, high temperature resistant, multi-conductor, flexible, power and control designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: silver-plated copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A colored acc. to HD 08 (VDE 029 part 08); from a green-yellow earth wire; from 6 black insulation with consecutive numbers acc. to EN 504 and a green-yellow earth wire A gray high temperature resistant flexible Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/ /+220 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm info@sab.com Web site:
23 HALOGEN-FREE ABLES 625 FRN M ontrol with numbered V SA AWM I/II A/B V FT1 FT Marking for X 625 FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 FRN M 16 AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 FRN M is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp, and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN gray UL recognized, SA approved flexible Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: < 12 mm = x O.D. > 12 mm = 4 x O.D. free movement: < 12 mm = 5 x O.D. > 12 mm = 6 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SAFT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm ontinued on next page 2 info@sab.com Web site:
24 HALOGEN-FREE ABLES 625 FRN M ontrol with numbered V SA AWM I/II A/B V FT1 FT2 Marking for X 625 FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 FRN M 16 AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 FRN M is a, multi-conductor, flexible power and control designed for use in all electrical equipment in dry, damp, and wet conditions. Recommended applications include machinery, data processing equipment, ventilation and air conditioning systems. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN gray UL recognized, SA approved flexible Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: < 12 mm = x O.D. > 12 mm = 4 x O.D. free movement: < 12 mm = 5 x O.D. > 12 mm = 6 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SAFT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm info@sab.com Web site:
25 HALOGEN-FREE ABLES 625 S FRN M ontrol with numbered and overall tinned copper screen V SA AWM I/II A/B V FT1 FT Marking for X 625 S FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 S FRN M 16 AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 S FRN M is multi-conductor, shielded, flexible control with a smaller OD for tighter installations. It is designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 5 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SA FT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm ontinued on next page 25 info@sab.com Web site:
26 HALOGEN-FREE ABLES 625 S FRN M ontrol with numbered and overall tinned copper screen 600V SA AWM I/II A/B V FT1 FT2 Marking for X 625 S FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 S FRN M 16 AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 S FRN M is multi-conductor, shielded, flexible control with a smaller OD for tighter installations. It is designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Wrapping: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from PETP foil tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 5 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SA FT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm info@sab.com Web site:
27 HALOGEN-FREE ABLES 625 SH FRN M ontrol with numbered, inner jacket and overall tinned copper screen 600V SA AWM I/II A/B V FT1 FT2 Marking for X 625 SH FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 SH FRN M 16AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 SH FRN M is multi-conductor, shielded, flexible control designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: 05 x O.D. free movement: 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SA FT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm ontinued on next page 27 info@sab.com Web site:
28 HALOGEN-FREE ABLES 625 SH FRN M ontrol with numbered, inner jacket and overall tinned copper screen 0V SA AWM I/II A/B V FT1 FT2 Marking for X 625 SH FRN M : A BRÖSES D-VIERSEN G 1.5 mm 2 X 625 SH FRN M 16AWG/12c U AWM Style V SA AWM I/II A/B V FT1 A 625 SH FRN M is multi-conductor, shielded, flexible control designed for use in all electrical equipment in dry, damp, and wet conditions. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, connections between control panels and machines, N machining centers, grinding machines and bottling equipment. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: olor code: Inner jacket: Screen: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 FRN black with consecutive numbers acc. to EN 504; green-yellow earth wire from FRN tinned copper braiding FRN gray UL recognized, SA approved good EM characteristics* flexible * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: UL/SA: 600 V DINVDE: Uo/U 00/500 V Testing voltage: 000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 1000 V fixed installation: free movement: 05 x O.D. 10 x O.D. DIN VDE: UL: up to +75 SA: up to +80 static: -40/+90 flexing: -0/+90 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN , SA FT1 orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm info@sab.com Web site:
29 A 810 FRN HALOGEN-FREE ABLES Motor connection with numbered, improved fire performance and extended temperature range 0.6/1 kv BRÖSES D-VIERSEN XA810 FRN 0.6/1 kv 7 x 1 Marking for XA 810 FRN : A BRÖSES D-VIERSEN XA810 FRN 0.6/1 kv 7 G 1.5 mm 2 A A 810 FRN is a flexible,, motor power supply which has been designed for automation technology, control machinery, machine and industrial factory, motor construction and drive systems. onductor: olor code: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A gray Nominal voltage: Uo/U 0.6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed installation: free movement: static: flexing: 4 x O.D. 6 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 16 AWG ( 27-29/0) 1.50 mm AWG ( 78/28) 6.00 mm AWG ( 122/26) mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 77/26) mm AWG ( 190/26) mm info@sab.com Web site:
30 0.6/1 kv HALOGEN-FREE ABLES Motor connection with numbered, A 812 FRN improved fire performance, inner jacket, overall tinned copper screen and extended temperature range D-VIERSEN XA812 FRN 0,6/1 kv 7 x 1.5 mm 2 Marking for XA 812 FRN : A BRÖSES D-VIERSEN XA812 FRN 0.6/1 kv 7 G 1.5 mm 2 A A 812 FRN is a flexible,, shielded motor power supply which has been designed for automation technology, control machinery, machine and industrial factory, motor construction and drive systems. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emission needs to be suppressed. onductor: bare copper strands acc. to DIN VDE 0295 class 5 + IE class 5 HD 8 class 5 olor code: Inner jacket: Screen: A black with consecutive numbers acc. to EN 504; green-yellow earth wire from A tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 0.6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 conductor/screen 2000 V fixed installation: free movement: static: flexing: 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 0 16 AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm info@sab.com Web site:
31 HALOGEN-FREE ABLES D 05 FRN Flexible data with improved fire performance and extended temperature range BRÖSES D-VIERSEN XD 05 FRN 2 x Marking for XD 05 FRN : A BRÖSES D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 A D 05 FRN is a, flexible, flame retardant, multi-conductor data designed for use in communication technologies. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN A gray easy stripping low capacitance flexible Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm ontinued on next page 1 info@sab.com Web site:
32 HALOGEN-FREE ABLES D 05 FRN Flexible data with improved fire performance and extended temperature range S D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 Marking for XD 05 FRN : A BRÖSES D-VIERSEN XD 05 FRN 2 x 0.5 mm 2 A D 05 FRN is a, flexible, flame retardant multi-conductor data designed for use in communication technologies. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN A gray easy stripping low capacitance flexible Peak operating voltage: < 24 AWG = max. 50 V > 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V > 24 AWG = 1200 V fixed installation: 05 x O.D. free movement: 10 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 2 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm info@sab.com Web site:
33 HALOGEN-FREE ABLES D 15 FRN Flexible data with improved fire performance, overall tinned copper screen and extended temperature range BRÖSES D-VIERSEN XD 15 FRN 7 Marking for XD 15 FRN : A BRÖSES D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 A D 15 FRN is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN Wrapping: Screen: PETP foil tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm ontinued on next page info@sab.com Web site:
34 HALOGEN-FREE ABLES D 15 FRN Flexible data with improved fire performance,overall tinned copper screen and extended temperature range D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 Marking for XD 15 FRN : A BRÖSES D-VIERSEN XD 15 FRN 7 x 0.5 mm 2 A D 15 FRN is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN Wrapping: PETP foil Screen: tinned copper braiding A gray good EM characteristics* * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: < 24 AWG = max. 50 V > 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V > 24 AWG = 1200 V fixed installation: 05 x O.D. free movement: 10 x O.D. static: -40/+85 flexing: -0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good 4 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 0/2) 1.50 mm info@sab.com Web site:
35 HALOGEN-FREE ABLES Paired data with improved D 45 FRN TP fire performance, overall tinned copper screen and extended temperature range D-VIERSEN XD 45 FRN TP x 2 x 0.25 m Marking for XD 45 FRN TP : A BRÖSES D-VIERSEN XD 45 FRN TP x 2 x 0.25 mm 2 A D 45 FRN TP is a, flexible, flame retardant, tinned copper shielded, multi-conductor data designed for use in electronics of data processing systems, weighing installations and office appliances, for increased requirements on transmission characteristics and near-end cross talk attenuation. In case of a fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: bare copper strands with reference to DIN VDE 0812 A olor code: with reference to DIN Wrapping: Screen: pairwise, pairs PETP foil tinned copper braiding A gray good EM characteristics* good transmission rates and crosstalk attenuation * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: fixed installation: free movement: static: flexing: < 24 AWG = max. 50 V > 24 AWG = max. 500 V < 24 AWG = 800 V > 24 AWG = 1200 V 05 x O.D. 10 x O.D. -40/+85-0/+85 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: acc. to IE EN 602 cat. resp. D. Flame retardant and self-extinguishing acc. to IE and EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN 6104 good pairs pairs pairs 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm info@sab.com Web site:
36 onstruction with reference to EN 5006 HALOGEN-FREE ABLES A 871 TWÖ Thin-wall connection and data lassification of smoke density acc. to NF F ÖSES D-VIERSEN XA 871 TWÖ 18 x 0.75 mm 2 Marking for XA 871 TWÖ : A BRÖSES D-VIERSEN XA 871 TWÖ 18 x 0.75 mm 2 A A 871 TWÖ is a very flexible connection and data. The is designed for use in transportation vehicles and locomotives. The thinwall outer jacket guarantees easier installation. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: tinned copper strands fine wires acc. to. EN white with black numbers acc. to. EN 504 black very flexible oil resistant classification of smoke density acc. to NF F thin-walled easy installation Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+105 flexible application: -25/+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: No flame propagation acc. to IE EN 602 resp. EN Flame retardant and self-extinguishing acc. to IE EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN index of smoke density acc. to NF F Ozone resistance: acc. to VDE 0282 part 2 very good 6 19 AWG 0.75 mm AWG 1.00 mm AWG 1.50 mm AWG 2.50 mm Especially for use in rail vehicles info@sab.com Web site:
37 onstruction with reference to EN 5006 HALOGEN-FREE ABLES A 872 TWÖ Thin-wall data with overall tinned copper screen lassification of smoke density acc. to NF F D-VIERSEN XA 872 TWÖ 6 x 1.0 mm 2 Marking for XA 872 TWÖ : A BRÖSES D-VIERSEN XA 872 TWÖ 6 x 1.0 mm 2 A A 872 TWÖ is a very flexible tinned copper shielded data. The is designed for use in transportation vehicles and locomotives. The thin-wall outer jacket guarantees easier installation. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: Wrapping: Screen: tinned copper strands fine wires acc. to. EN white with black numbers acc. to. EN 504 PETP foil tinned copper braiding black very flexible good EM characteristics* oil resistant classification of smoke density acc. to NF F thin-walled easier installation * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Testing voltage: Uo/U 00/500 V 2000 V fixed laying: 05 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/ /+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: No flame propagation acc. to IE EN 602 resp. EN Flame retardant and self-extinguishing acc. to IE EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN index of smoke density acc. to NF F Ozone resistance: acc. to VDE 0282 part 2 very good 20 AWG 0.50 mm ± ± ± ± ± ± ± ± ± ± ± ± AWG 0.75 mm ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± AWG 1.00 mm ± ± ± ± ± ± ± ± ± ± ± ± AWG 1.50 mm ± ± ± ± ± ± ± ± Especially for use in rail vehicles info@sab.com Web site:
38 onstruction with reference to EN 5006 HALOGEN-FREE ABLES Paired Thin-wall connection and data A 876 TWÖ TP with overall tinned copper screen lassification of smoke density acc. to NF F IERSEN XA 876 TWÖ TP x 2 x 0.75 mm 2 Marking for XA 876 TWÖ TP : A BRÖSES D-VIERSEN XA 876 TWÖ TP x 2 x 0.75 mm 2 A A 876 TWÖ TP is a very flexible tinned copper shielded data, consisting of twisted pairs. The is designed for use in transportation vehicles and locomotives. The thin-wall outer jacket guarantees easier installation. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be suppressed. In case of fire, no corrosive gases are produced. This is particularly suitable for use where human life and valuable property are exposed to an extremely high risk of fire. onductor: Insulation : olor code: Wrapping: Screen: tinned copper strands fine wires acc. to. EN white with black numbers acc. to. EN 504 pairwise, pairs PETP foil tinned copper braiding black very flexible good EM characteristics* oil resistant classification of smoke density acc. to NF F thin-walled easier installation * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V fixed laying: 05 x O. D. flexible application: 10 x O. D. fixed laying: -40/+105 flexible application: -25/+105 Zero halogen: acc. to DIN VDE 0472 part 815 and IE Burning characteristics: No flame propagation acc. to IE EN 602 resp. EN Flame retardant and self-extinguishing acc. to IE EN orrosivity: in compliance with IE and EN VDE 0482 part Smoke density: acc. to IE EN index of smoke density acc. to NF F Ozone resistance: acc. to VDE 0282 part 2 very good 8 pairs 20 AWG 0.50 mm AWG 0.75 mm Especially for use in rail vehicles info@sab.com Web site:
39 HALOGEN-FREE ABLES R 600 FRN S Rail ontrol with numbered DIN EN edition 201 BRÖSES D-VIERSEN X R 600 FRN 12 x 1.5 mm Marking for XR 600 FRN : A BRÖSES D-VIERSEN X R 600 FRN 12 G 1.5 mm 2 Our specially developed for rail vehicles control A R 600 FRN with suitable external materials tested according to DIN EN are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- Nominal voltage: Testing voltage U: Uo/U 00/500 V 000 V fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm ontinued on next page 9 Especially for use in rail vehicles info@sab.com Web site:
40 DIN EN edition 201 HALOGEN-FREE ABLES R 600 FRN S Rail ontrol with numbered SES D-VIERSEN X R 600 FRN 12 x 1.5 mm 2 Marking for XR 600 FRN : A BRÖSES D-VIERSEN X R 600 FRN 12 G 1.5 mm 2 Our specially developed for rail vehicles control A R 600 FRN with suitable external materials tested according to DIN EN are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- Nominal voltage: Uo/U 00/500 V Testing voltage U: 000 V fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm Especially for use in rail vehicles info@sab.com Web site:
41 HALOGEN-FREE ABLES S Rail ontrol with numbered R 68 FRN and overall tinned copper screen DIN EN edition 201 Especially for use in rail vehicles D-VIERSEN XR 68 FRN 5 x 1.5 mm 2 Marking for XR 68 FRN : A BRÖSES D-VIERSEN XR 68 FRN 5 G 1.5 mm 2 Our specially developed A R 68 FRN with overall tinned copper screen and suitable external materials tested according to DIN EN are particularly suited for flexible installation in rail vehicles. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: Wrapping: Screen: black with consecutive numbers acc. to EN 504; green-yellow earth wire from conductrors PETP foil tinned copper braiding gray good EM characteristics** fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- ** opper braiding should be connected circularly to optimize ** the EM characteristics Nominal voltage: Testing voltage U: Uo/U 00/500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: 000 V conductor/screen 2000 V -40/+90-0/+90 acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm AWG ( 0/2) 1.00 mm AWG ( 46/0) 2.50 mm AWG ( 2/2) 0.75 mm AWG ( 27-29/0) 1.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm info@sab.com Web site:
42 DIN EN edition 201 HALOGEN-FREE ABLES R 605 FRN S Rail Data Flame retardant acc. to UN/EE R118 S D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 Marking for XR 605 FRN : A BRÖSES D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 With our specially developed for rail vehicles data with colored A R 605 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- flame retardant acc. to UN/EE R118 Especially for use in rail vehicles Peak operating voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Flame retardant acc. to ISO 6722 (UN/EE R118) Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm ontinued on next page info@sab.com Web site:
43 DIN EN edition 201 HALOGEN-FREE ABLES R 605 FRN S Rail Data Flame retardant acc. to UN/EE R118 BRÖSES D-VIERSEN XR 605 FRN 2 x 0 Marking for XR 605 FRN : A BRÖSES D-VIERSEN XR 605 FRN 2 x 0.5 mm 2 With our specially developed for rail vehicles data with colored A R 605 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN gray fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- flame retardant acc. to UN/EE R118 Especially for use in rail vehicles Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Flame retardant acc. to ISO 6722 (UN/EE R118) Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 good Tested at reference types. 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm info@sab.com Web site:
44 DIN EN edition 201 HALOGEN-FREE ABLES R 615 FRN ASTM E ASTM E S Rail Data with overall tinned copper screen Flame retardant acc. to UN/EE R118 SEN XR 615 FRN 7 x 0.5 mm 2 Marking for XR 615 FRN : A BRÖSES D-VIERSEN XR 615 FRN 7 x 0.5 mm 2 Especially for use in rail vehicles With our specially developed for rail vehicles data with colored and overall tinned copper screen A R 615 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN Wrapping: Screen: PETP foil tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: Zero halogen: -40/+90-0/+90 acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN ASTM E good Tested at reference types AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm ontinued on next page info@sab.com Web site:
45 DIN EN edition 201 HALOGEN-FREE ABLES R 615 FRN ASTM E ASTM E S Rail Data with overall tinned copper screen Flame retardant acc. to UN/EE R118 Especially for use in rail vehicles D-VIERSEN XR 615 FRN 7 x 0.5 m Marking for XR 615 FRN : A BRÖSES D-VIERSEN XR 615 FRN 7 x 0.5 mm 2 With our specially developed for rail vehicles data with colored and overall tinned copper screen A R 615 FRN, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN Wrapping: PETP foil Screen: tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V Testing voltage: < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN ASTM E good Tested at reference types. 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 0/2) 1.50 mm info@sab.com Web site:
46 DIN EN edition 201 HALOGEN-FREE ABLES R 645 FRN TP ASTM E ASTM E S Rail Data, paired with overall tinned copper screen Flame retardant acc. to UN/EE R118 SEN XR 645 FRN TP x 2 x 0.25 mm 2 Marking for XR 645 FRN TP : A BRÖSES D-VIERSEN XR 645 FRN TP x 2 x 0.25 mm 2 With our specially developed for rail vehicles data with colored, overall tinned copper screen and twisted pairs A R 645 FRN TP, we offer our customers maximum planning certainty and comfort for flexible installation in railway vehicles. In addition to high flexibility, these s meet the highest safety standards for the railway industry. For these s, the stringent requirements have been confirmed in accordance with DIN EN onductor: bare copper strands with reference to IE 60228, EN 6028, VDE 0295, class 5 olor code: with reference to DIN Wrapping: Screen: pairwise, pairs PETP foil tinned copper braiding gray good EM characteristics* fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- flame retardant acc. to UN/EE R118 tested acc. to American ASTM standard good transmission rates and crosstalk attenuation * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: < 24 AWG = max. 50 V 24 AWG = max. 500 V < 24 AWG = 800 V 24 AWG = 1200 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Flame retardant acc. to ISO 6722 (UN/EE R118). Burning tests acc. to ASTM E Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN ASTM E good 46 pairs 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm pairs 22 AWG ( 7/0) 0.4 mm AWG ( 16/2) 0.50 mm pairs 19 AWG ( 2/2) 0.75 mm Especially for use in rail vehicles info@sab.com Web site:
47 DIN EN edition 201 HALOGEN-FREE ABLES A 280 FRN X Wiring / ontrol up to +125 S BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 mm2 Especially for use in rail vehicles Marking for XA 280 FRN X : A BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 mm 2 BRÖSES D-VIERSEN XA 280 FRN X 1 x 1.0 m Marking for XA 280 FRN X : A BRÖSES D-VIERSEN XA 280 FRN X 5 x 0.5 mm 2 Our control A A 280 FRN X fulfill the requirements of DIN EN and have proven durable in use. onductor: Single conductor: olor code: Multi-conductor : olor code: Multi-conductor : Multi-conductor : Multi-conductor : tinned copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 white white with black numbers acc. to. EN 504 black good ozone resistance good oil and chemical resistance fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- ohmic resistance at 20 max. Ω/km heating value approx. kwh/km Nominal voltage: Testing voltage: Uo/U 00/500 V 2000 V : 5 x O. D. in conduit, fixed laying: Zero halogen: -40/+125 (single conductor) -50/+125 (multi-core ) acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 ohmic resistance at 20 max. Ω/km heating value approx. kwh/km AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 0/2) 1.50 mm AWG ( 46/0) 2.50 mm info@sab.com Web site:
48 DIN EN edition 201 HALOGEN-FREE ABLES A 285 FRN X ontrol with numbered and overall tinned copper screen up to VIERSEN XA 285 FRN X 5 x 0.5 mm 2 Marking for XA 285 FRN X : A BRÖSES D-VIERSEN XA 285 FRN X 5 x 0.5 mm 2 Our control A A 280 FRN X fulfills the requirements of DIN EN and have proven durable in use. onductor: olor code: Wrapping: Screen: tinned copper strands fine wires acc. to IE 60228, EN 60228, VDE 0295, class 5 white with black numbers acc. to. EN 504 PETP foil tinned copper braiding black good EM characteristics* good ozone resistance good oil and chemical resistance fulfills fire protection requirements R15 (EL1A) acc. to DIN EN for hazard levels HL1- * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage: 2000 V : 10 x O. D. in conduit, fixed laying: -50/+125 Zero halogen: acc. to EN EN are fulfilled. Development of Hl is < 0.5% acc. to DIN EN ph-value is > 4. acc. to DIN EN onductivity is < 10.0 µs/mm acc. to DIN EN Fluoric content < 0.1% acc. to DIN EN Burning characteristics: No flame propagation acc. to DIN EN , DIN EN and DIN EN 5005 section Flame retardant and self-extinguishing acc. to DIN EN Toxicity: acc. to DIN EN 5005 Smoke density: acc. to DIN EN 6104 ohmic resistance at 20 max. Ω/km heating value approx. kwh/km ohmic resistance at 20 max. Ω/km heating value approx. kwh/km AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm Especially for use in rail vehicles info@sab.com Web site:
49 BL = BlueLine HALOGEN-FREE ABLES BL 405 FRN Flexible data approval A BRÖSES D-VIERSEN XBL 405 FRN Data able 16 x 0.5 mm 2 16 x 0.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 405 FRN : ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN SHF 1 compound acc. to IE pigeon blue asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Peak operating voltage: max. 50 V Testing voltage: 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm AWG ( 7/0) 0.4 mm AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm especially for use in shipbuilding industry 49 info@sab.com Web site:
50 approval HALOGEN-FREE ABLES BL 415 FRN Flexible data with overall tinned copper screen BL = BlueLine m 2 ABS Assessed Lloyd s Register Marking for X BL 415 FRN : A BRÖSES D-VIERSEN XBL 415 FRN Data able 7 x 0.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. 50 onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN Wrapping: Screen: PETP foil tinned copper braiding SHF 1 compound acc. to IE pigeon blue 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm asbestos-free good EM characteristics* flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics Peak operating voltage: Testing voltage: max. 50 V 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and 22 AWG ( 7/0) 0.4 mm AWG ( 16/2) 0.50 mm Possible on request: bare copper strands alternative color code jacket color AWG ( 2/2) 0.75 mm especially for use in shipbuilding industry info@sab.com Web site:
51 BL = BlueLine HALOGEN-FREE ABLES BL 445 FRN TP Flexible paired data with overall tinned copper screen approval x 2 x 0.25 mm 2 ABS Assessed Lloyd s Regist Marking for X BL 445 FRN : A BRÖSES D-VIERSEN XBL 445 FRN Data able x 0.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. Data s, type A BlueLine Data, are available with small cross sections beginning with 26 AWG. This results in a small outer diameter which offers an outstanding advantage particularly where there is only a little space. onductor: tinned copper strands acc. to DIN VDE 0812 resp. IE 60228, EN 60228, VDE 0295, class 5 olor code: with reference to DIN pairwise, pairs Wrapping: PETP foil Screen: tinned copper braiding SHF 1 compound acc. to IE pigeon blue pairs 26 AWG ( 18/8) 0.14 mm AWG ( 14/4) 0.25 mm asbestos-free good EM characteristics* good transmission rates and crosstalk attenuation flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics pairs Peak operating voltage: Testing voltage: max. 50 V 1500 V fixed laying: 5 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and 22 AWG ( 7/0) 0.4 mm AWG ( 16/2) 0.50 mm Possible on request: bare copper strands alternative color code jacket color pairs 19 AWG ( 2/2) 0.75 mm especially for use in shipbuilding industry 51 info@sab.com Web site:
52 approval ol able 12 G 1.5 mm 2 HALOGEN-FREE ABLES BL 400 FRN Flexible control 00/500 V ABS Assessed Lloyd s Register BL = BlueLine Marking for X BL 400 FRN : A BRÖSES D-VIERSEN XBL 400 FRN ontrol able 12 G 1.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine ontrol with a nominal voltage of 00/500 V compliment the new product series with control s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code: black with consecutive numbers acc. to EN 504 green-yellow earth wire from SHF 1 compound acc. to IE pigeon blue asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm especially for use in shipbuilding industry info@sab.com Web site:
53 BL = BlueLine HALOGEN-FREE ABLES Flexible control BL 48 FRN with overall tinned copper screen 00/500 V approval A BRÖSES D-VIERSEN XBL 48 FRN ontrol able 5 G 1.5 mm 2 5 G 1.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 48 FRN : ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine ontrol with a nominal voltage of 00/500 V compliment the new product series with control s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code Wrapping: Screen: black with consecutive numbers acc. to EN 504 green-yellow earth wire from PETP foil tinned copper braiding SHF 1 compound acc. to IE pigeon blue 20 AWG ( 16/2) 0.50 mm AWG ( 2/2) 0.75 mm asbestos-free good EM characteristics* flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale * opper braiding should be connected circularly to optimize * the EM characteristics Nominal voltage: Uo/U 00/500 V Testing voltage U: 2000 V acc. to DIN VDE 0281 part 2 + HD 21.2, conductor/screen 2000 V fixed laying: 15 x O. D. flexible application: 10 x O. D. fixed laying: flexible application: -40/+90-0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and 18 AWG ( 0/2) 1.00 mm AWG ( 27-29/0) 1.50 mm Possible on request: bare copper strands alternative color code jacket color AWG ( 46/0) 2.50 mm especially for use in shipbuilding industry 5 info@sab.com Web site:
54 approval HALOGEN-FREE ABLES BL 410 FRN Flexible power 0.6/1 kv BL = BlueLine 0,6/1 kv 12 G 1.5 mm 2 ABS Assessed Lloyd s Register Marking for X BL 410 FRN : A BRÖSES D-VIERSEN XBL 410 FRN Power able 0,6/1 kv 12 G 1.5 mm 2 ABS Assessed Lloyd s Register and current meter marking The A BlueLine s have been approved by GL, LR as well as ABS. Their A characteristics fulfill the highest safety-related aspects in shipbuilding with regards to both fire performance as well as being. The type A BlueLine Power with a nominal voltage of 0,6/1 kv compliment the new product series with power supply s for electrical components. onductor: tinned copper strands acc. to IE 60228, EN 60228, VDE 0295, class 5 olor code black with consecutive numbers acc. to EN 504 green-yellow earth wire from SHF 1 compound acc. to IE black asbestos-free flexible for applications acc. to Hong ong onvention ingredients tested acc. to the requirements of the Hong ong onvention (2009) of the IMO approvals: Germanischer Lloyd Lloyd s Register American Bureau of Shipping Registro Italiano Navale Nominal voltage: Uo/U 0,6/1 kv Testing voltage U: 4000 V acc. to DIN VDE 0281 part 2 + HD 21.2 fixed laying: 4 x O. D. flexible application: 6 x O. D. fixed laying: -40/+90 flexible application: -0/+90 Zero halogen: acc. to EN IE Burning characteristics: acc. to IE DIN EN cat. A. Flame retardant and self-extinguishing acc. to IE DIN EN orrosivity: in compliance with IE DIN EN Smoke density: acc. to IE EN 6104 very good q and Possible on request: bare copper strands alternative color code jacket color AWG ( 27-29/0) 1.50 mm AWG ( 46/0) 2.50 mm AWG ( 52/28) 4.00 mm AWG ( 78/28) 6.00 mm AWG ( 77/26) mm AWG ( 122/26) mm AWG ( 190/26) mm AWG ( 272/26) 5.00 mm AWG ( 400/26) mm especially for use in shipbuilding industry info@sab.com Web site:
Item Description Page. Halogen-free wiring cable with improved fire performance and extended temperature range 300/500 V, CE...
Halogen-free ables E-mail: info@sab.com Web site: www.sab.com Item Description Page hapter A A 146 FRN A A 156 FRN Halogen-free wiring with improved fire performance and extended temperature range 300/500
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING BLUELINE - CABLES FOR SHIPBUILDING.
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING BLUELINE - CABLES FOR SHIPBUILDING www.sab-kabel.de CONTENT OVERVIEW Who we are.........................................................................................................
More informationCables for Railway Technology
Cables for Railway Technology www.sab-worldwide.com Content q In case that you don t find a suitable cable for your special application, we are always prepared to design a cable according to your individual
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR RAILWAY TECHNOLOGY. den-belitsky / Fotolia
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR RAILWAY TECHNOLOGY den-belitsky / Fotolia CONTENT OVERVIEW Who we are.........................................................................................................
More informationBlueLine Cables for Shipbuilding
BlueLine Cables for Shipbuilding www.sab-worldwide.com Content page The Company..........................................................................................................................
More informationSABIX Ultra. Standards: EN EN Cat C or D IEC (halogen-free)
SABIX Ultra Standards: EN 60332-1-2 EN 60332-3 Cat C or D IEC 60754-1 (halogen-free) IEC 60754-2 + EN 50267-2-2 (corrosivity of gases) EN 61034 (smoke density) NF C 32-70 C1 (fire performance acc. to French
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR WIND POWER PLANT. TimSiegert-batcam / Fotolia
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR WIND POWER PLANT TimSiegert-batcam / Fotolia CONTENT General < Who we are......................................................................................
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT CABLE HARNESSING CABLES FOR WIND POWER PLANT. TimSiegert-batcam / Fotolia
SPECIAL CABLES TEMPERATURE MEASUREMENT CABLE HARNESSING made in Viersen CABLES FOR WIND POWER PLANT TimSiegert-batcam / Fotolia CONTENT General < Who we are......................................................................................
More informationCables for Airport Equipment
Cables for Airport Euipment BB 380 Boarding Bridge www.sab-worldwide.com Content The Company............................................................................................................
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING S ULTRA CONTINUOUSLY FLEXIBLE WITH HIGHEST FIRE PROTECTION
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING S ULTRA CONTINUOUSLY FLEXIBLE WITH HIGHEST FIRE PROTECTION fire protection halogen-free flexibility oil resistance These are the characteristics united
More informationÖLFLEX CLASSIC 135 CH -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V
PRODUCT INFORMATION Screened halogen-free control cable with improved fire characteristics -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V Info CPR:
More informationÖLFLEX CLASSIC 110 H Info Benefits
Halogen-free control cable, oil resistant and very flexible - halogen-free control cable, HFFR, oil-resistant, very flexible and cold-resistant down to -30 C for various applications, CPR Info CPR: Article
More informationIndustrial Ethernet Cables
Industrial Ethernet Cables www.sab-worldwide.com INDUSTRIAL ETHERNET CABLES Content page Application of Industrial ETHERNET Cables.........................................................................................
More informationPRODUCT INFORMATION ÖLFLEX HEAT 125 C MC. Info Improved characteristics in the event of a fire GL - Germanischer Lloyd approved
Electron beam cross-linked cables for more demanding application requirements - halogen free shielded control cable with GL certificate, special fire performance, IEC 60332-3, suitable for +125 C Info
More informationÖLFLEX CLASSIC 130 H - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V
Halogen-free control cable with improved fire characteristics - halogen-free control cable, HFFR and flexible for various applications, U 0 /U: 300/500V Info CPR: choice under www.lappkabel.com/cpr For
More informationwww. h itech controls.com (800) I (303) Click or Call for a Quotel Photo: HELUKABEL Robotic Cables C HELUKABEL
Photo: HELUKABEL Robotic Cables Robotic Cables With over 30 years of experience with cables and lines, we also have the right solutions for the demands placed on the components to be installed by the applications
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR CLEAN ROOM TECHNOLOGY. industrieblick / Fotolia
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR CLEAN ROOM TECHNOLOGY industrieblick / Fotolia Content page Who we are............................................................................................................
More informationVDE tested single cores according to EN (H05Z-K & H07Z-K) for more demanding requirements
VDE tested single cores according to EN 50525-3-41 (H05Z-K & H07Z-K) for more demanding requirements ÖLFLEX HEAT 125 C MC - halogen free single core with GL certificate, special fire performance, IEC 60332-3,
More informationApprovals (Norm references)
ÖLFLEX ROBUST 200 Robust and weatherproofed Wide range of application opportunities Machine tool manufacture, medical technology, laundries, car washing equipment, chemical industry, composting plants,
More information20 HUBER+SUHNER RADOX SOLAR
All our cables fully comply with the European directives 76/769/EWG, 2003/11/EG, 2000/53/EG, 2003/53/EG and 2002/95/EG (RoHS) and the requirements of REACH Nr. EC1907/2006. 20 RADOX SOLAR cables RADOX
More informationTechnical data sheet LÜTZE SUPERFLEX PLUS (C) PUR FEEDBACK Encoder cables for Siemens and other systems For highest requirements in drive technology
PUR feedback cables C-track compatible Subject to technical modification 111456 Identification Type SU+(C)P SE(4 0,5+4 2 0,38)UL 30V GN SIEMENS designation* 1BD21 Use/Application/Characteristics Application
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR THE LAMP AND LIGHT INDUSTRY. tailex / Fotolia
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR THE LAMP AND LIGHT INDUSTRY tailex / Fotolia CONTENT page < Who we are...............................................................................
More informationTechnical data sheet LÜTZE SUPERFLEX PLUS M (C) PUR SERVO 0.6/1 kv Supply line for Bosch Rexroth and other systems For highest requirements
PVC servo cables C-track compatible shielded Subject to technical modification 111270 Identification Type SU+M(C)P SE(4G1,0+2 (2 0,75))UL 1KV OR INK Description* INK 0653 Use/Application/Properties Application
More informationTHE RIGHT SOLUTION FOR EVERY APPLICATION
CATEGORY CABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLICATION FLEXIBLE CONTROL CONTINUOUS FLEX SILICONE TORSION TRAY VFD DATA SERVO MOTOR EUROAN STYLE BUS/CAT HALOGENFREE REELING SCIAL CUSTOM
More informationCables for the lamp and light industry
Cables for the lamp and light industry www.sab-worldwide.com CONTENT page < The company............................................................................... < S - worldwide...............................................................................
More informationPUR c-track cables For highest requirements
2. C-track cables PUR c-track cables For highest requirements LÜTZE SUPERFLEX PLUS N PUR UL 300 V Machine and device construction, transport and conveyor technology Through full PUR jacket and TPE conductor
More informationIdentification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR. Part-No
PUR servo cables C-track compatible shielded Subject to technical modification 111600 Identification Type SU+M(C)P SE(4G1,5+(2 0,75)+(2 AWG22))UL 1KV OR Use/Application/Properties Application Combined
More informationData sheet E-DAT Industry patch cord V6 IP67 - RJ m
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6
More informationSelection table for heat-resistant cables
Just click on the products in the selection table. Click on the HELUKABEL logo at the end of the page to go back. Cables & Wires Selection table for heat-resistant cables www.helukabel.com HEAT-RESISTANT
More informationTechnical Data Sheet Shielded (CY) PVC Control Cable
Technical Data Sheet Shielded (CY) PVC Control Cable MachFlex 350 CY VDE Registered Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed
More informationPower & Control Cable IEC
(2-, 3-, 4,- and 5-cores) U 0 Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14). Recoended
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING BLUELINE - CABLES FOR SHIPBUILDING.
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING BLUELINE - CABLES FOR SHIPBUILDING www.sab-kabel.de TRADITIONAL FAMILY BUSINESS SINCE 1947 2 CONTENT OVERVIEW Who we are.........................................................................................................
More informationENERGY. TECSUN(PV) PV1-F Cables for Photovoltaics
ENERGY TECSUN(PV) PV1-F Cables for Photovoltaics Technical Data Manufacturer Trademark Type designation Prysmian Kabel und Systeme GmbH Kabelwerk Neustadt bei Coburg / Germany TECSUN (PV) PV1-F Approvals
More informationData sheet chainflex CF240
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Aluminum/Polyester tape and extremely bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic foil 4.
More informationIndustrial Cables and Wires
HELUKABEL Products are available from MARYLAND METRICS P.O. Box Owings Mills, MD USA web: http://mdmetric.com ph: ()35-330 (00)3-30 fx: ()35-3 (00)7-939 email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
More informationTechnical Data Sheet Unshielded (YY) PVC Control Cable
MachineTuff Cables Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include precision control sensors, multi axis control machines,
More informationMOTOR, SERVO, & FEEDBACK CABLES
MOTOR, SERVO, & FEEDBACK CABLES Motor, servo, and feedback cables Temperature ( C) - flexing Temperature ( C) - fixed Nominal voltage U 0 /U Bending radius - flexing x Ø Bending radius - fixed x Ø Halogen-free
More informationSAC-4P-M12MS/ 5,0-PUR SH
Extract from the online catalog SAC-4P-M12MS/ 5,0-PUR SH Order No.: 1682647 Sensor/Actuator cable, 4-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Plug, straight M12, A-coded, on Free conductor
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationTHE RIGHT SOLUTION FOR EVERY APPLICATION
VFD ABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLIATION Products Added VFD Lean TR VFD Dual TR Servo VFD ombo DS VFD XLPE TR VFD XLPE 2KV TR Also Included! FLEXIBLE ONTROL ONTINUOUS FLEX SILIONE
More informationCRANE, CONVEYOR, LIFT & REELING CABLES
CRANE, CONVEYOR, LIFT & REELING CABLES F-PVC Series... 158 F-TPECY Series...160 P Series...161 PR Series...162 PRRT Series... 164 PRVS Series...166 Reeling/Trailing Cable Enquiry Form...168 P: (09) 264
More informationData sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
More informationCABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
More informationData sheet. Connection cable M12 jack straight - free line end 8-pole, X-coded 0.5 m. Illustrations P/N 142M2X20005 EAN
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable Cat.6A, x-coded, 8-pole side 1: M12-jack, straight
More informationTechnical Data Sheet Unshielded (YY) PVC Control Cable
Technical Data Sheet Unshielded (YY) PVC Control Cable MachFlex 350 YY VDE Registered Flexible PVC Control Cables Applications Designed for applications which are installed in occasional flexing and fixed
More informationData sheet chainflex CF140.UL
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture 4. CFRIP: Tear strip
More informationData sheet chainflex CF8821
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Overall banding: Plastic foil 4. Core insulation: Mechanically high-quality TPE
More informationCables for cable carriers and reels SYSTEMS IN MOTION
Cables for cable carriers and reels SYSTEMS IN MOTION 8e/en 2016 Content PVC flatform cables (H)07VVH6-F H07VVH6-F... 4 PVC flatform cables, shielded YCFLY... 6 Neoprene flatform cables NGFLGÖU UL... 8
More informationPhoto: HELUKABEL. Trailing Cables G 1
Photo: HELUKABEL Trailing Cables G 1 Trailing Cables Trailing cables are used for high mechanical stress, especially for applications with frequent winding and unwinding with simultaneous tensile and torsional
More informationCables and multistrand wires Main catalog. Cableline Test & Measurement
Cables and multistrand wires Main catalog Cableline Test & Measurement STÄUBLI ELECTRICAL CONNECTORS Long-term solutions Expert connections Stäubli Electrical Connectors is a leading international manufacturer
More informationFR-N1X1G1. Low voltage - Energy, cabling, signalling and control
Low voltage - Energy, cabling, signalling and control FR-N1X1G1 Construction: NF C 32-323 NF C 32-323/1 Fire propagation: NF EN 60332-3-24 NF C 32-070 C1 IEC 60332-3-24 C Flame propagation: NF EN 60332-1-2
More information600/1000 V. 5. Flame Retardancy VDE , DIN EN , IEC
MachineTuff Cables Low Voltage Control & Power Cable Galvanized Steel Wire Braid Armored (GSWB) > Excellent Mechanical Protection Applications Designed for applications which are installed in occasional
More informationTechnical Data Sheet Shielded (CY) PVC Control Cable
MachineTuff Cables Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed in occasional flexing and fixed locations. Cable applications include
More informationData sheet chainflex CF6
1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Overall shield: Extremely bending-stable braid made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling PVC mixture
More informationINFORMATION. Hybrid cables. Description
Description INFORMATION This chapter shows the technical data of the hybrid cables available at SEW EURODRIVE. For assignment of hybrid cables to the products, refer to the respective chapters..1 Description
More informationSAC-5P-3,0-PUR/M12FS SH
Extract from the online catalog SAC-5P-3,0-PUR/M12FS SH Order No.: 1682948 Sensor/actuator cable, 5-pos., PUR halogen-free black, shielded, free conductor end on straight M12 socket, cable length: 3 m
More informationTechnical attributes
Technical attributes Standards adapted to DIN VDE 0281 Conductor material Cu, bare Conductor type flexible Conductor standard IEC 60228 Conductor category 5 Core insulation Core s black, number-coded,
More informationData sheet. Connection line M12 4-pole D-coded 1.0 m. Illustrations P/N 142M1D11010 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection line Cat.5e, 4-pole, D-coded to IEC 61076-2-101 straight
More informationData sheet chainflex CFSOFT1
to 5 x d Highly flexible, soft design PVC outer jacket Oil-resistant Flame retardant 1. Outer jacket: Pressure extruded, oil-resistant PVC mixture 2. Core insulation: Mechanically high-quality TPE mixture
More informationHIGH TEMPERATURE CABLES
HIGH TEMPERATURE CABLES C O N T E N T S DEF 61-12 Part 18 Type 1 LFH Equipment Wires :2 Technical Information for DEF 61-12 :8 PTFE Insulated Equipment Wire Single Core :10 PTFE EFGLAS Aircraft Cable :12
More informationENERGY. TECSUN(PV) PV1 F Cables for Photovoltaics
ENERGY TECSUN(PV) PV1 F Cables for Photovoltaics Technical Data Electrical Thermal Manufacturer Trademark Type designation Prysmian Kabel und Systeme GmbH Kabelwerk Neustadt bei Coburg / DE TECSUN (PV)
More information6000 Series Ethernet Buccaneer
Thermo-plastic version Patch Cord Flex Connector - Pur Jacket Cable PXP6037 Mates with PXP6033TP type panel mounting Overmoulded patchcords with IP rated connector Supplied with shielded RJ45 plug Single
More informationTechnical Data Sheet Shielded (CY) PVC Control Cable
Technical Data Sheet Shielded (CY) PVC Control Cable MachFlex 375 CY Tinned Copper Braid Shield (TCB) Excellent Noise Immunity Applications Designed for applications which are installed in occasional flexing
More informationPRODUCT INFORMATION H07V-K
GmbH PRODUCT INFORMATION European cable type certification Cables' marking also stands for the international endorsement of national certification institutes' testing marks and certificates,
More informationCAN-Bus cable. CAN-Bus cable Can-Bus / Field-Bus cable for medium to maximum load requirements. chainflex cable. Overview. igus e-chainsystems
Overview Stranding.PVC.PUR.D (4x0,25)C (2x0,5)C.020 CF11.02.02.02.LC.D igus chainflex +++ chainflex cable works +++ (4x0,5)C.PVC.021.PUR.021.021 CF11.05.01.02.LC CF11.05.01.02.LC.D.PVC.022.PUR.022.022
More informationIndustry Cables Special cables for industrial applications General Catalogue
Industry Cables Special cables for industrial applications General Catalogue Industry Cables Special cables for industrial applications General catalogue Linking the Future As the worldwide leader in the
More informationCF270.UL.D.
Outer jacket: Pressure extruded PUR mixture Overall shield: Bending-stable braid made of tinned copper wires Core insulation: Mechanically high-quality, especially low-capacitance TPE mixture Conductor:
More information0.6/1KV FLAME RETARDANT ARMORED & SHEATHED CABLE PRODUCT CONSTRUCTION 1. CONDUCTOR
TIOI CABLE 0.6/1KV FLAME RETARDANT ARMORED & SHEATHED CABLE 1 2 3 4 5 ICC CABLE CORP. PRODUCT DESCRIPTION 0.6/1KV ONE - FIVE CONDUCTOR, MULTI-CONDUCTOR COMMERCIAL MARINE POWER & CONTROL CABLE 90 C TEMPERATURE
More informationPVC motor cables unshielded
PVC motor cables unshielded LÜTZE-SILFLEX M PVC Motor connecting/energy supply cable Motor connecting cable and energy supply cable in machine and apparatus engineering, transport and conveyor technology,
More informationTraction Cable Radox 3 GKW/S EMC
General Properties : Excellent high temperature, low temperature, oil, diesel oil, ozone and weathering resistance, zero halogen, flame retardant, solder iron resistant, easily strippable, flexible, excellent
More information(N)SSHÖU O/J, (N)SSHÖU 3E, (N)SSHÖU 3E + ST 0.6/1kV Cable
()SSHÖU O/J, ()SSHÖU 3E, ()SSHÖU 3E + ST 0.6/1kV Cable Eland Product Group: A7JS APPLICATIO Heavy duty tough rubber flexible cable with or without individually earth screened cores for dynamic or static
More informationThe BIG names in Cable for the BIG jobs in Cable. Flexible Cables
The BIG names in Cable for the BIG jobs in Cable Control Treotham Automation is the exclusive distributor for one of the biggest names in the cable industry. Treotham now offers it s own exclusive brand
More informationDetailed Specifications & Technical Data
Description: 20 AWG stranded (7x28).038" tinned copper conductors, polyethylene insulation, Beldfoil (100% coverage) plus a tinned copper braid shield (55% coverage), sunlight-resistant PVC jacket. Physical
More informationTHE RIGHT SOLUTION FOR EVERY APPLICATION
SAB CABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLICATION FLEXIBLE CONTROL CONTINUOUS FLEX SILICONE TORSION TRAY VFD DATA SERVO MOTOR EUROPEAN STYLE BUS/CAT HALOGENFREE REELING SPECIAL CUSTOM
More informationDNV-GL HH CE RoHS-II conform
Armour: Extremely bending- and torsion-stable aramid braid Armour: Extremely bending- and torsion-stable aramid wrapping Outer jacket: Pressure extruded PUR mixture Fibre: FOC-fibre made out of glass Subcable
More informationShip Wiring and Marine Cables
Ship Wiring and Marine Cables Photo: HELUKABEL Ship Wiring and Marine Cables 1 Ship Wiring and Marine Cables We offer ship wiring and marine cables with approvals from Germanischer Lloyd, Lloyds Register
More informationPRODUCT INFORMATION. ÖLFLEX HEAT 180 SiF. Info Flexible fine-wire copper conductor
Versatile single core cable with extended temperature range - fine wire silicone single core for use in machines, plant construction and toolbuilding for temperatures up to +180 C Info Flexible fine-wire
More informationData sheet chainflex CF113.D
For detailed overview please see design table 1. Outer jacket: Pressure extruded PUR mixture 2. Banding: Plastic fleece 3. Overall shield: Extremely bending-stable braid made of tinned copper wires 4.
More informationCABLED TWISTED PAIRS CONDUCTORS
CABLED TWISTED PAIRS CONDUCTORS NQP SERIES Twisted Pair uctors Mil Spec, U.L. AWM Recognized Style 2464 and CSA Certified AWM II A/B GRAY PVC JACKET National Wire & Cable Corporation manufactures a complete
More informationENERGY. Solar Cables
ENERGY Solar Cables Contents TECSUN(PV) PV1-F Cables for Photovoltaics 3 Technical Data 4 Design Features 6 Selection and Ordering Data 6 TECSUN DUO (PV) Cables for Photovoltaics 7 Technical Data 8 Design
More informationConductor: plain wire, fine stranding as per VDE 0295 class 6 from 50 mm² fine stranding according to VDE 0295 class 5
Semoflex DRUM Description Application In dry and damp rooms, explosive security areas and also outdoors for heavy-duty units such as hoisting gears, transportation systems, motorized cable reels, rail
More informationData sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101)
More informationData sheet chainflex CF10
1. Outer jacket: Pressure extruded, halogen-free TPE mixture 2. Overall shield: Extremely bending-resistant braiding made of tinned copper wires 3. Inner jacket: Pressure extruded, gusset-filling TPE mixture
More informationPower & Control Cable IEC
(2-, 3-, and 4-cores) U 0 PVC-Insulation, Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14).
More informationCFBUS CFBUS.PVC.040 CFBUS.PUR.040 CFBUS.040 CF CAT5 CFBUS.041 CFBUS.044
for medium to high load requirements. Overview Class.PVC.PUR (3D-e-chain - cable) CAT5 (4x0,25)C (4x(2x0,25))C.PVC.040.PUR.040.040 CF14.02.02.02.CAT5 34 mm.041 CF14.02.04.02.CAT5 (5x(2x0,25))C 34 mm igus
More informationPRODUCT INFORMATION MULTI-STANDARD SC 2.1. U.I. Lapp GmbH
GmbH PRODUCT INFORMATION USA: UL-listed (MTW), Canada: CSA (TEW), Europe: H07V-K (depending on cross s.), tin-coated strands For use in the most important global markets Reduction in technical documentation
More informationData sheet chainflex CF270.UL.D
For detailed overview please see design table 1. Outer jacket: Pressure extruded PUR mixture 2. Overall shield: Bending-resistant braiding made of tinned copper wires. 3. Banding: Plastic fleece 4. Core
More informationGJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector
GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................
More informationÖLFLEX VFD 2XL - screened VFD cable for fixed installation or occasional flexing with UL TC-ER.
Multi-listed, flexible VFD cable - screened VFD cable for fixed installation or occasional flexing with UL TC-ER. Info VFD drive and motor connections Wide application range (NFPA 70/NEC)/ compliance with
More informationZHPCG CK0226 POWER CABLE WIRE & CABLE
ZHPCG CK0226 POWER CABLE WIRE & CABLE ZHPCG CK0226 POWER CABLE WIRE & CABLE Application/Use Rail approved zero Halogen Power Cables, available as 750V or 1800V rated. ZHPCG cables are all Halogen free,
More informationData sheet chainflex CF881
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Stranded
More informationPower & Control Cables. U o. /U 0.6/1 kv - IEC
Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 KERPEN GmbH & Co. KG 07.2005 Printing errors excepted. Subject to alteration List of Contents Introduction Page B1 Construction Page B3 Use Page B4
More informationUnarmoured Single-Core Cables to BS6883
Unarmoured Single-Core Cables to BS TAC. EPR. SW 00/00 V 1 Application Unarmoured cable for use where mechanical protection is not required for fixed wiring in ships and in mobile and fixed offshore units
More informationData sheet chainflex CF5
1. Outer jacket: Pressure extruded, gusset-filling, oilresistant PVC mixture 2. Core insulation: Mechanically high-quality TPE or PVC mixture 3. CFRIP: Tear strip for faster cable stripping 4. Conductor:
More informationConductor: Fine-wire strand consisting of bare copper wires (following DIN EN 60228). Mechanically high-quality TPE mixture. (see colour code table)
Outer jacket: Pressure extruded PVC mixture Inner jacket: Pressure extruded, gusset filling PVC mixture Conductor: Fine-wire strand consisting of bare copper wires 6 1 Core insulation: Mechanically highquality
More informationData sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
More informationSPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR AUTOMATION INDUSTRY
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CABLES FOR AUTOMATION INDUSTRY CONTENT OVERVIEW Who we are...............................................................................................................
More informationData sheet chainflex CF886
1. Outer jacket: Pressure extruded PVC mixture 2. Overall shield: Braiding made of tinned copper wires 3. Banding: Plastic foil 4. Core insulation: Mechanically high-quality PVC mixture 5. Conductor: Conductor
More informationH05 V-K PVC-Single Cores, fine wire stranded
H05 VK PVCSingle Cores, fine wire stranded Technical data PVC single cores to DINVDE0283 H05 VK/H05 VU to DINVDE028 part3, HD2.3S3 and IEC02273 Temperature range flexing 5 C to +70 C fixed installation
More informationManufacturing quality. Delivering service. Single Conductors DESCRIPTION: Single copper conductor, tinned stranded insulated with moisture and heat resistant, chemically cross-linked polyethylene insulation
More information