Water. VAG RIKO Plunger Valve one-piece body, with handwheel PN 10/16/25/40 - DN KAT-A 2014
|
|
|
- Erin Miller
- 5 years ago
- Views:
Transcription
1 one-piece ody, with Product characteristics and enefits Face-to-face length acc. to EN 55-1, asic series 15 - from 1.5 x With flange ends on oth sides acc. to EN Control valve in straightway type With customized control device depending on operating conditions Low actuating torque due to pressure alanced valve piston Rotationally symmetrical flow guidance Annular flow cross section in each position Axial movement of the plunger y means of cran gear mechanism With self-locing worm gear unit including position indicator No locing due to long piston guide rails Elastic profile sealing ring located in the no-flow zone for high duraility Wear-resistant, corrosion-resistant and infiltration-proof piston guides in the ody y micro-finished ronze weld overlay Piston sealed y Quad Ring Materials Body: uctile cast iron EN-JS 1030 (GGG-) Piston guide rails: Bronze overlay welded Piston: Stainless steel Valve sealing: EPM Inner parts: Stainless steel (exception: > cran gear from EN-JS 1030 (GGG-)) Bolts: Stainless steel A4 (IN EN ISO 6) Bearing ush: Bronze Eye olts for lifting: Galvanized steel 1.01 (C15) Corrosion protection Inside and outside epoxy coating Versions Standard version as descried Special designs availale on request With slotted cylinder to control high differential pressure for water with suspended solids (Form "SZ") With orifice cylinder to control high differential pressure (Form "LH") With cut off edge and sudden enlargement of cross sectional area at the seat to PN 10//25/ KAT-A 14 Tests and approvals Final inspection test acc. to EN 6 (IN 3 Part 4) Operation data Specify operating pressure when inquiring/ordering.: - Maximum flow rate and minimum differential pressure - Minimum flow rate and maximum differential pressure - Static pressure upstream of valve - Static pressure downstream of valve - ynamic pressure upstream of valve - ynamic pressure downstream of valve Note control lower differential pressure (Form "E") KAT-B 14 1 in VAG RKV plunger valve design Field of Application Chamer installation Installation in plants For proper installation and safe operation please follow the installation and operation instructions: Field of application Pressure test acc. to EN PN Maximum operating pressure [ar] Maximum operating temperature for neutral liquids [ C] Test pressure ody with water [ar] Test pressure seat with water [ar] 1 11 We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding. Air Valves and Control Valves 1
2 one-piece ody, with Water rawing PN cylinder Air Valves and Control Valves We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding.
3 one-piece ody, with PN cylinder PN 25 cylinder We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding. Air Valves and Control Valves 3
4 one-piece ody, with Water PN 25 cylinder PN cylinder Air Valves and Control Valves We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding.
5 one-piece ody, with PN cylinder PN 10 cylinder We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding. Air Valves and Control Valves 5
6 one-piece ody, with Water PN 10 cylinder Air Valves and Control Valves We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding.
7 one-piece ody, with Further information Type "SZ" with slotted cylinder Type "LH" with multiple orifice cylinder Application: Preferaly as control valve In case of considerale pressure differences Optimum adjustment to the plant conditions To prevent cavitation For water containing suspended matter Application: Preferaly as control valve In case of considerale pressure differences Optimum adjustment to the plant conditions Optimum prevention of cavitation Type "E" with cut-off edge Application: As pump start-up valve with sufficient ac pressure In ottom outlets We reserve the right to mae technical changes and use similar or higher-quality materials. rawings are non-inding. Air Valves and Control Valves 7
Water. VAG EKN Butterfly Valve epoxy PN 6/10/16/25 - DN KAT-A 1310-EW
Water VAG EKN Butterfly Valve Product characteristics and enefits Resilient seated in accordance with EN 593 Face-to-face length acc. to EN -1, asic series 14 (IN, F4) With flange ends on oth sides acc.
VAG Butterfly Valves
VAG Butterfly Valves VAG EKN Butterfly Valve H-Series New for the highest requirements Runners Pressure compensation channels O-ring seal Hydrodynamic disk Automatic sealing system Retaining ring Tapered-pin
VAG RIKO Plunger Valve
VAG Control Valves VAG RIKO Plunger Valve Self-lubricating bearing in the piston rod Closed bearing sealed with O-rings, bronze bearing bushes on both sides External profile sealing ring Self-locking worm
Gas. VAG EKO plus Gate Valve resilient-seated - short face-to-face length PN 10/16 - DN KAT-A 1032-F4-G
Gas VAG EKO plus Gate Valve resilient-seated - short face-to-face length Product characteristics and benefits Resilient seated in accordance with EN 1377 (IN 3352 - A) Face-to-face length acc. to EN 55-1,
VAG RIKO Plunger Valve
Operating and maintenance instructions VAG RIKO Plunger Valve KAT-B 2010 Edition 7-1 / 03-11 Content 1 General 3 1.1 Safety 3 1.2 Proper use 3 1.3 Marking 3 We reserve the right to make technical changes
VRX Plunger. Advanced Control Valve
VRX Plunger Advanced Control Valve Av-Tek is leading the way in the development, manufacturing, and implementation of high-quality valves for use municipal, industrial, and sea water industries. Our premium
Nero Needle Valves. Nero Needle Valves
Nero Needle Valves Main Characteristic The needle valve is mainly designed for water flow rate and pressure regulation in a pipeline. The regulation takes place thank the axial movement of the piston,
Technical details. Product features
VAG Hydrants VAG NOVA 284 Standpost Hydrant Maintenance-free stem seal Nominal diameter DN 80 / DN 100 Installation depth DN 80: 1.00 m / 1.25 m / 1.50 m DN 100: 1.25 m / 1.20 m Standard model: Upper and
DEP7 SG Iron Excess Pressure Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting disk Check Valve Shaft Bearing bush Disk Seat Nominal pressures PN 10, 16 Nominal diameters DN 200 1400 Fields of application: drinking water, preclarified
SERIES 300 PLUNGER VALVES
PART 1 - GENERAL 1.01 DESCRIPTION A. This section includes specifications for materials, manufacturing, coating, testing, and shipping of X, XX-inch, 150 lb plunger valve(s). B. Tag Numbers: FCV-XXXX 1.02
VAG NOVA 284 Standpost Hydrant. Technical details. Product features
VAG Hydrants VAG NOVA 284 Standpost Hydrant Maintenance-free stem seal Nominal diameters DN 80, 100 Installation depth: - DN 80: 1,00 m / 1,25 m / 1,50 m - DN 100: 1,25 m / 1,50 m Standard version: Upper
BERMAD Waterworks. 800 Series. Technical Specifications Metric
Technical Specifications SI 800 Metric Series Patterns and Sizes "Y" Pattern DN40-500 Angle DN40-450 Connection Standard Flanged: ISO 7005-1(ISO 10, 16, 25 & 40) Water Temperature Up to 80ºC Working pressure
2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange
Data sheet 2 - way valve (NO), pressure relieved (PN 25) VG - external thread VGF - flange Description VG and VGF are pressure relieved 2-way normally open (NO) valves, designed to be combined with: -
DP27, DP27E, DP27G, DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron Bodies
Page 1 of 9 TI-P470-01 H Issue 4 DP27, DP27, DP27G, ISO 9001 DP27R and DP27Y Pilot Operated Pressure Reducing Valves with SG Iron odies ert. No. LRQ 0963008 Description The pilot operated pressure reducing
KLINGER KVN. Piston valves DN (1/2" 8")
KINGER Piston valves 15 200 (1/2" 8") www.klinger.kfc.at KINGER The original, tried and tested a million times over PROUCT VNTGES» ow maintenance» Relialy tight in the ore and to atmosphere in accordance
ZONE CONTROLE / 2-WAY
ZONE CONTROLE / 2-WAY PRESSURE INDEPENDENT BALANCING AND CONTROL VALVE ON/OFF High-performing and compact, these pressure-independent temperature control valves for variable flow heating and cooling systems,
KEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
ERHARD is a company of. Data sheet ERHARD needle valves
ERHARD is a company of Data sheet ERHARD needle valves ERHARD RKV needle valves The innovative needle valve with the four positive points Based on decades of experience in the design and production of
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
Stafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company
Product: W W Stafsjö s knife gate valve W is a bi-directional valve with full bore. It is made to handle different liquids, especially in water, waste water and biogas plants. The W valve is designed of
Differential Piston Control Valves Pressure, Level and Flow Control
Differential Piston Control Valves Pressure, Level and Flow Control A Century of Experience VAG GA Industries valves are known for long term reliability in the most demanding water and wastewater applications.
1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA
TECNICA DATA Nominal diameter: 0 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series Flange accommodation: DIN 1 PN /1 ap-joint flange: DIN 21 and DIN 22 Weld-on flange: DIN 27
Annular flow valve SV-FA
INDEX 1. INTRODUCTION 1.1 SOLUTIONS Annular Flow Valve s technical benefits 3 1.2 Functions and operations manual 4 1.3 Manufacturing range 4 2. PARTICULARS 5 2.1 Material and coverings 5 2.1.1 Standard
Pressure relief controller AVA (PN 25)
Data sheet Pressure relief controller AVA (PN 25) Description AVA is a self-acting pressure relief controller primarily for use in district heating systems. The controller is normally closed and opens
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
PRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
PLUNGER VALVES F500 / F560 / F550
PLUNGER VALVES F500 / F560 / F550 /32 PLUNGER VALVES DN80 - DN1800 INDEX Page Main Characteristics Design data F500: Exploded view - Valve description F560: Exploded view - Valve description F550: Exploded
ULTRA SWING CHECK VALVES SINGLE & MULTI DOOR TYPE: SABS 144 & 192
ULTRA SWING CHECK VALVES SINGLE & MULTI OOR TYPE: SAS 144 & 19 T O T A L V A L V E S O L U T I O N S SINGLE OOR CHECK VALVES These valves are of self-contained, free swinging clack conventional style.
Flow controller (PN 25) AVQ - return and flow mounting
Data sheet Flow controller (PN 5) - return and flow mounting Description is a self-acting flow controller primarily for use in district heating systems. The controller closes when set max. flow is exceeded.
Pressure reduction controllers (PN 25) AVDS - for steam AVD - for water
Data sheet Pressure reduction controllers (PN 25) - for steam AVD - for water Description Main data AVD: DN 15-50 k VS 0,4-25 m 3 /h PN 25 Setting range: 1-5 bar / 3-12 bar Temperature: - Circulation water/glycolic
AUTOMATIC CONTROL VALVES BY RAPHAEL
CONTROL VALVES AUTOMATIC CONTROL VALVES BY RAPHAEL RAF PRESSURE RAF PRESSURE offers the possibility of controlling an upstream pressure, a downstream pressure or both. RAF PRESSURE REDUCING reduces and
Description. Functions. Technical data. Applications. Tests. Level control float valve, enabling the control of the filling level.
Level control float valve, enabling the control of the filling level. Description For general information concerning the operation of a Hydrobloc control valve, please consult our general manual (series
AVK DOUBLE ECCENTRIC BUTTERFLY VALVE, PN 10/16, INTEGRAL SEAT, IP 67 GEARBOX WITH HANDWHEEL
AVK OUBE EENTRI BUTTERFY VAVE, PN 10/16, INTEGRA SEAT, IP 67 GEARBOX WITH HANWHEE 00 019 ouble eccentric butterfly valve, for water to max. 70, designed according to EN 593, Face to face according to EN
SLV EN 1092 PN 10 ANSI B16.5 Class 150 AS 2129 Table D AS 2129 Table E
SLV EN 2 PN ANSI.5 Class 0 AS 2 Table D AS 2 Table E Stafsjö s knife gate valve SLV is bi-directional and designed for the most demanding slurry and abrasive applications. It is a full bore valve with
Features and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
Pressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
ilent Silent Operation Proven Performance Cost Effective Silent Check Valves Check Valve
ulletin / Silent Operation Proven Performance Cost Effective ilent Check Silent Check s www.valmatic.com Certified Lead-Free NSF/NSI & 7 Certified Feature Highlights Threaded C F C Globe F C E Wafer F
COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE
PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900
Datasheet ERHARD ECLI butterfly valve
Datasheet ERHARD ECLI butterfly valve Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial applications: One of these is the gate valve, which was developed
Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM
Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes
Pressure independent balancing and control valve For ON/OFF control
KT 512 Pressure independent balancing and control valve For ON/OFF control Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE High-performing and compact, these
DRV7 and DRV7G SG Iron Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
Diaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
Pilot Operated Pressure Reducing Valves with Stainless Steel Bodies
Page 1 of 7 TI-P107-01 CH Issue 10 Cert. No. LRQ 0963008 ISO 9001 Pilot Operated Pressure Reducing Valves with Stainless Steel odies Description The pilot operated pressure reducing valves have been manufactured
From PN10 to PN100 (from ANSI125 to ANSI600)
DISCHARGE FIXED CONE VALVE (Howell-Bunger Type) This valve is a popular free-discharge valve, suitable both for low head and high head operation. It can work cavitation free under large head drops and
Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange
Data sheet Temperature controller for heating (PN 25) AVT / VG - external thread AVT / VGF - flange Description AVT / VG AVT / VGF The AVT / VG(F) controller is a self-acting proportional temperature controller
WAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE
PROJECT NAME LOCATION PRESSURE RELIEF / SURGE ANTICIPATOR CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 2-1/2 in. (65 mm) through 18 in. (450 mm) Control
BERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
PRESSURE RELIEF VALVE CONTROL VALVE
PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES. TIS asia
DOUBLE ECCENTRIC DOUBLE FLANGED BUTTERFLY VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
Thermo. operated water valve Type WVTS
Data sheet Thermo. operated water valve Type WVTS Thermo. operated water valve type WVTS is suitable for controlling the temperature of a flow of water or neutral brine. WVTS opens on rising sensor temperature
BERMAD Irrigation. Technical Specifications. WW-700 & 800 Series Metric. 800 Metric
Tecnical Specifications -700 & 0 Series SI 700 Metric SI 0 Metric Available Sizes & Patterns DN - DN 0 - Y Pattern DN - DN 4 - Angle DN 600 - DN 0 - Globe Connection Standard Flanged: ISO 7005-2 (ISO,
Operating and Maintenance Instructions. VAG LIMU-STOP Non-Return Valve
Operating and Maintenance Instructions VAG LIMU-STOP Non-Return Valve KAT-B 1547 Edition 1-01/2018 Table of contents 1 General 3 1.1 Safety 3 1.2 Proper use 3 1.3 Identification 3 VAG reserves the right
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
HYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as
VAG CEREX 300 Butterfly Valve
Operation and Maintenance Instructions VAG CEREX 300 Butterfly Valve VAG CEREX 300-W Butterfly Valve VAG CEREX 300-L Butterfly Valve Edition 7-13-12-2017 Table of Contents 1 General 3 1.1 Safety 3 1.2
series BUTTERFLY VALVE DOUBLE ECCENTRIC FLANGED FAF 3800 PRODUCTION STANDARDS DN100 DN2000 PN Design EN 593 EN ISO Flanged
PRODUCTION STANDARDS DN100 DN2000 PN 10-16-25 Design EN 593 Connection End Connection EN 1092-2 ISO 7005-2 - Flanged EN 558 Series 14 DIN 3202 F4 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
DRV4 and DRV4G Cast Steel Pressure Reducing Valves
Local regulations may restrict the use of this product to below the conditions quoted. n the interests of development and improvement of the product, we reserve the right to change the specification without
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
LEAD FREE * LFF115 (Globe) LFF1115 (Angle)
ES-ACV-SB-LFF115_LFF1115 LEAD FREE * Pressure Reducing Control Valve Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS)
1.6 M 015-A CENTRE FLANGED BUTTERFLY VALVE M 015-A TECHNICAL DATA
CENTRE FANGED BUTTERFY VAVE M 01-A TECNICA DATA Nominal diameter: 0 00 Face-to-face: EN Series (DIN 2 T 1) ISO 72 Series API 09 Table 1 BS 1 Series 4 Flange accommodation: DIN 1 PN /1 Flange Surface Design:
D I S T R I B U T E D V A L V E S. NAVCO Series E Resilient Seat Butterfly Valve NAVCO
NVCO Series E Resilient Seat utterfly Valve NVCO SERIES E RESILIENT SET UTTERFLY VLVE Features vailable in sizes 2 in. - 24 in. (50 mm - 600 mm) 200 psi 2 in. - 12 in. (50 mm - 300 mm) 150 psi 14 in. -
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
Biffi Morin HP Series actuator
HP series - Direct gas / hydraulic actuator with ductile iron housing and carbon steel cylinders Spring return and double acting actuators Quarter-trun output torques to 240,000 lb. in. Features and benefits
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
PRESSURE REDUCING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE REDUCING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL
Datasheet ERHARD SWING check valve
Datasheet Non-return valve with perfect self-centring The is a non-return valve that can be flexibly used for water and sewage. Featuring a 93 % opening value, it guarantees an extremely low zeta value,
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
Differential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
PRESSURE RELIEF / SUSTAINING CONTROL VALVES
PROJECT NAME LOCATION PRESSURE RELIEF / SUSTAINING CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900 mm) Control Valves PART
Operating and maintenance instructions. VAG SKR Slanted Seat Tilting Disk Check Valve
Operating and maintenance instructions VAG SKR Slanted Seat Tilting Disk Check Valve KAT-B 1510 Edition 4-12/2010 Content 1 General 3 1.1 Safety 3 1.2 Proper use 3 2 Transportation and storage 3 2.1 Transportation
Size : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Closes quickly when downstream pressure exceeds reduced pressure setpoint 3 PRESSURE REDUCING VALVE with SURGE
Designed for blow-off service in boiler systems with pressures of 3,206 psig.
Designed for blow-off service in boiler systems with pressures of 3,6 psig. General Description asic requirements for the design and use of blow-off valves are established by the SM Power oiler Code, Section
Hison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
ERHARD is a company of. Data sheet ERHARD ROCO wave
ERHARD is a company of Data sheet Content Product range (DN / PN) Fields of applications Area of use Materials Coating systems Concept of sealing Shaft bearing Gear Drive variants Approvals Weight Zeta
1.4 F 012-A VÁLVULA BORBOLETA COM FLANGE DUPLO F012-A.
VÁVUA BORBOETA COM FANGE DUPO F0-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series 13 ISO 2 Series 13 API 0 Table 2C BS 1 short NF E 2-30.1 Flange accommodation:
*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
Materials : Ductile iron EN GJS body, PTFE seat
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and Class 150 (PN20) - 25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long
ERHARD is a company of. ERHARD ECLI butterfly valve
ERHARD is a company of ERHARD ECLI butterfly valve The cost-effective solution for simple shut-off tasks Two types of valves are mainly used for shutting off pipelines in sewage engineering or industrial
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
Control Valve, Plastic/Metal
Control Valve, Plastic/Metal Construction The GEMÜ 2/2-way control valve has a stainless steel piston actuator. ll metallic actuator components are made of stainless steel. It is available with a normally
Pressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
Non Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
3-Way Temperature Control Valve
12/06 3-Way Temperature Control Valve G Valve Typical applications Lubricating oil temperature control Jacket water cooling Charge air temperature control Central cooling Sea water cooling Key benefits
VAG CEREX M300 Butterfly Valve
Operation and Maintenance Instructions VAG CEREX M300 Butterfly Valve KAT 1310-B Edition4 12-17 Table of Contents 1 General 3 1.1 Safety 3 1.2 Proper use 3 1.3 Identification 3 VAG reserves the right to
Materials : Ductile iron EN GJS 500-7, PTFE seat
Seat Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 40 to 300 mm Between flanges PN10/16-25 C + 200 C Max Pressure : 16 Bars up to DN150 Specifications : Long neck for isolation Lug
Series 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
HS10S-FA. Water station. Product specification sheet
HS10S-FA Water station Product specification sheet Range of Application Medium Drinking water Inlet pressure Max. 16 bar Outlet pressure 1.5-6.5 bar Installation position Horizontal with filter bowl downwards
Model VCD-18. Ratings. Blade Operation. Size Limitations. Features & Options
Application and Design The series is a general purpose, low leakage control damper intended for application in low pressure and velocity systems. atings Pressure: 2 in. wg (.5 kpa) - pressure differential.
Differential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
Automatic Control Valves WATTS EU 100 Series
utomatic ontrol Valves WTTS U Series The Watts Industries range of automatic control valves consist of a hydraulically operated valve, which is controlled by a pilot circuit. The main valve (U ) is the
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,