Grease separators manufactured from polyethylene

Size: px
Start display at page:

Download "Grease separators manufactured from polyethylene"

Transcription

1 mnufctured from polyethylene For freestnding nd underground instlltion

2 Everything specilists need to know Grese seprtors Resons for instlling grese seprtion system Opertions from smll resturnts to lrge scle food processing plnts disposing fts, oils nd grese (FOGs) into public wstewter dringe systems re becoming n incresing concern to industry, government nd environmentl gencies. Wstewter trvels long distnce from its originl source to the wstewter tretment fcilities. During this time lrge mounts of grese nd food wstes build up in the dringe pipe systems leding to opertionl nd public effects: Wter is one of our most precious resources nd is not vilble in unlimited quntities. For this reson, contminted wstewter from kitchens must be pretreted nd clened with the id of pproprite seprtor systems before it is dischrged to the public sewer system. KESSEL offers wide rnge of innovtive polymer seprtors for different res of ppliction nd wstewter quntities: Opertionl effects One of the most severe dringe problems in food processing fcilities is the build up of grese lyers within the dringe system leding to negtive effects, such s incresed odour emissions, reduced efficiency of the dringe system, dditionl mintennce costs, pipe blockge or even potentil flooding. Avoiding pipe blockge Grese seprtors Grese seprtors for freestnding instlltion Grese seprtors for disposl vi disposl truck (full disposl) re used wherever medium to lrge quntities of grese occur. The entire tnk contents re emptied t regulr intervls. Grese seprtors for underground instlltion If indoor spce is limited, the grese seprtor system must be instlled outside the building. Individul Solutions Thnks to the knowledge nd possibilities in the field of polyethylene technology KESSEL is not only ble to mnufcture series products, but lso specil solutions in terms of size, shpe nd fetures in ccordnce with projectspecific requirements. Prevention of corrosion nd odour buildup Public effects FOGs lso ffect public wstewter strems by cusing sewer blockge nd reducing the efficiency of public sewge plnts. This leds to dditionl costs for mintennce nd repir. Effects on wstewter tretment fcilities

3 Everything specilists need to know For clen environment When to use grese seprtor? Seprtor function bsed on EN 85 Grese seprtors should be instlled in ll loctions where greses nd oils from plnt or niml origin re required to be removed from the wstewter strem. This pplies to commercil nd industril pplictions, for exmple: Butchers, met nd susge fctories Preprepred mel production Slughterhouses nd met preprtion fcilities Sop / sterin production plnts Resturnts nd fst food shops Fish production fcilities Cooking oil refineries, butter / mrgrine production Frying fcilities / nut rosting fctories Cfeteris in commercil buildings, hospitls, universities, militry bses nd government gencies Polyethylene grese seprtors The long term solution The KESSEL Euro seprtor bsed on Euro Norm EN 85 (s seen in the illustrtion below) consists of grese seprtion chmber with n integrted sludge trp locted t the bottom. Following the seprtor is smpling chmber. Wstewter contining fts, oils nd grese (FOG) is guided into the seprtor by pcifying pipe which llows the wstewter to be slowly nd evenly distributed into the seprtor preventing fst flowing wstewter from disturbing the seprtion process inside the chmber. The seprtion of the light mteril (FOG) nd the hevier mteril (sludge) from the wstewter is ll ccomplished by the force of grvity. Hevily emulsified greses nd oils my not be completely seprble with the grvity method. Wht cn enter the seprtor? Only wstewter contining orgnic FOG, which re required to be seprted from the wter, should be llowed into the seprtor. Under no circumstnces should sewge, rinwter or wstewter contining minerl oils (hydrocrbon bsed) be llowed to enter the seprtor. Exmples of wht should be connected to seprtor: floor drins with odour trps, dringe chnnels, sinks, dishwshing mchines nd cooking vts. Sludge seprtion chmber The sludge seprtor serves to collect sludge / sediment which sinks to the bottom of the chmber due to its density being greter thn tht of the density of wter. Grese seprtion chmber In the grese seprtion chmber, orgnic FOG (being less dense thn wter) seprte from the wstewter nd rise to the surfce of the chmber. As more wstewter enters the chmber, the lyer of seprted greses nd oils builds from the top down until the grese seprtion chmber is full nd the entire chmber is emptied. Esy trnsport Their low weight llows our grese seprtors to be trnsported esily by hnd on site. A specil bse design lso llows them to be trnsported by forklift truck. Simple nd fst instlltion With EsyClen: The curved shpe of the onepiece tnk mkes it idel for retrofitting purposes, even where spce is tight through nrrow stircses nd doorwys for exmple. Frcture resistnce The polyethylene mteril ensures high impct strength. This mens tht soil movements cn esily be compensted for where instlltion is in the ground. Resistnt to ggressive grese The polyethylene mteril used is 00 % resistnt to ggressive grese. This gurntees long service life since there is no dmge to the mteril due to corrosion. Polyethylene Wrrnty 0 Y Ye r s Inlet Refill inlet 3 Seprtion chmber 4 Inspection window 5 Outlet 6 Smpling chmber 3

4 Selection criteri Alwys the right product wstewter tretment SELECTION CRITERIA FOR GREASE SEPARATORS Version G D D+S D+SP M+S PV+S Odour Reduced Disposl The direct disposl grese seprtor connection llows the disposl truck to vcuum out the grese seprtor contents without opening the seprtor covers. Odour Free Disposl The integrted ShredderMixSystem intkes the entire seprtor contents, shreds it nd then uses this homogenized mixture to rinse nd clen the interior seprtor wlls. Control unit The ShredderMixSystem, designed to homogenize the seprtor contents, cn be strted nd controlled without needing direct ccess to the seprtor. Disposl Pump In the cse tht the disposl truck is too high nd/or too fr from the grese seprtor to llow disposl vi the truck's vcuum system, the seprtor cn be equipped its own disposl pump system. Fully Automted Opertion All of the preprogrmmed disposl steps of the seprtor's contents function fully utomticlly. Products for free stnding instlltion see pge / 0 Products for underground instlltion see pge 7 / 8 6 4

5 INFORMATION Do you require more detiled informtion? Our Service Centre will be hppy to help. Complete System Solution In ddition to individul grese nd oil seprtors, KESSEL lso offers complete seprtor pckges consisting of seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Lifting nd pumping sttions for free stnding nd underground instlltion. Stinless steel drins nd chnnels for kitchens nd food processing plnts. Individul Solutions Thnks to the knowledge nd possibilities in the field of polyethylene technology KESSEL is not only ble to mnufcture series products, but lso specil solutions in ccordnce with projectspecific requirements. SmrtSelect simply mkes plnning fster SmrtSelect is n efficient tool for configuring, designing nd clculting dringe solutions. It significntly reduces plnning effort. References Over the pst decdes, KESSEL products hve proven themselves countless times in destintions ll over the world. Scn the following QR code to directly view our list of references. In ddition, SmrtSelect provides registered users with project mngement progrm which cn be used to request nd edit sved projects. Registrtion t smrtselect.kessel.com is free nd tkes only few minutes! Clcultion module lifting sttions Clcultion module seprtors Configurtor for lterntive seling in the system smrtselect.kessel.com 5

6 KESSELProduct informtion Polyethylene grese seprtors SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Grese seprtors mde of polyethylene NS, 3, 4, 7, 0 Grese seprtor EsyClen for freestnding setup inside buildings COMPLETE SYSTEM SOLUTION In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. OPTIMUM USE OF SPACE Thnks to the refill inlet integrted in the seprtor. This mkes instlltion directly t the wll possible. The new KESSEL grese seprtors EsyClen bring ese of instlltion, clening performnce nd energy efficiency up to new level. EsyClen seprtors cn be retrofitted up to the completely utomtic system even while instlled, nd cn thus be dpted to chnging requirements. IMPROVED CLEANING RESULTS Wedgeshped bottom for extrction t the lowest point (only 3 litres residul sludge volume). For nominl sizes NS. 6

7 NS 5 NS 5 NS 5 Grese seprtor Euro Auto Mix & Pump (PV+S) ccording to EN 85 Grese seprtor Euro ccording to EN 85 nd DIN SONIC CONTROL for the mesurement, disply nd control of the grese lyer thickness in grese seprtor. STRAIGHTFORWARD MAINTENANCE AND INSPECTION Sloped rrngement of the tnk openings permits better ccess. PLANNING MADE EASY! Distinction between versions "in direction of flow right or left" is no longer necessry. Direction of flow cn be chnged on site by chnging inlet nd outlet. Inlet Outlet IMPROVED PLACEMENT THANKS TO THE CURVED SHAPE Also idel for retrofitting nd renovtion work in rooms with very nrrow ccess. Polyethylene Wrrnty Polyethylene Wrrnty SHREDDERMIXSYSTEM serves to comminute, mix nd clen the tnk content without odor emission during disposl. 0 Yers WARRANTY KESSEL offers fctory extended wrrnty of 0 yers on the polyethylene grese seprtor tnks. 7

8 for freestnding instlltion EsyClen Auto Mix & Pump (PV+S) Illustrtion Article description NS Weight Article # Products Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions, remote control, TeleControl Grese seprtor EsyClen Auto Mix & Pump (PV+S) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene, pumping cpcity 3.0 kw For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, inspection window with interior clening rm, PV+S version fully utomted odour free disposl, clening nd refilling system t touch of button, mintennce free mcerting motor (stinless steel bldes) for seprtor clening nd disposl, includes closure vlve for esy motor removl, motor floor mount included with instlltion hrdwre nd ntivibrtion mtt, ctutor vlve for utomted trnsfer from clening to disposl mode, top mounted wter jet(s) for grese lyer brekup nd wter spry nozzles for interior wll clening during disposl, with LCD disply control unit settble in English, Germn or French lnguge nd mins power sfety on/off switch, with BMS connections, twin inch solenoid vlves for connection of cold nd hot wter pipes to seprtor, inch interior threded refill inlet with ir gp, 75 mm OD PN 0 pressure disposl pipe with integrted fork lift grips t bse of seprtor, low weight compct design, 00 % corrosion free polyethylene body construction (0 yer wrrnty). NS NS 60 kg 65 kg 78 kg 6 kg 7 kg 60 kg 65 kg 78 kg 6 kg 7 kg without SonicControl /PVS /PVS /PVS /PVS /PVS with SonicControl /PVS /PVS /PVS /PVS /PVS Disposl pump performnce curve H [m] 6 4 3,0 kw Q [m 3 /h] H [m] = Bckwter height 40 l OD 75 Ø = Outer dimeter b = Setup dimensions h h h3 Technicl note see pge b b Nominl size NS ) Ø Instlltion dimensions l x b b h h h Wstewter contents Sludge trp Seprtor 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese storge 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l 8

9 for freestnding instlltion Instlltion exmple EsyClen Auto Mix & Pump (PV+S) Professionl dvntges Grese seprtor ShredderMixSystem 3 Disposl line 4 Connection for disposl truck EsyClen Auto Mix & Pump (PV+S) grese seprtors re designed ccording to EN 85 nd re equipped with fully utomted disposl, self clening nd refill system. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the EsyClen Auto Mix & Pump (PV+S) seprtors is tht complete disposl cn tke plce through permnently instlled disposl lines while the twin covers of the seprtor remin closed. With this dvntge, the disposl truck cn hook up to connection on n exterior wll of the building so tht the pump of the seprtor cn pump the seprtor contents into the witing disposl truck without ny unplesnt odours escping. After the contents of the seprtor hve been pumped out, the interior of the seprtor is utomticlly rinsed nd clened with wrm wter in multistep utomted process. The complete procedure occurs with the press of button nd is lso vilble with remote control system so tht the driver of the disposl vehicle cn hndle the entire procedure without the necessity of ny building personnel being present. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. 5 Remote control system (optionl) 6 Smpling chmber 7 Lifting sttion Progrmcontrolled disposl nd rinsing device ShredderMixSystem for homogenistion of the tnk contents 3.0 kw pump Clen nd odourfree disposl nd clening Optionl remote control Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor clcultion SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice EsyClen Auto Mix & Pump (PV+S) seprtors should be instlled in ll res where nuisnce odour problems re either undesired or not llowed. The systems llow the user to customize settings to improve disposl performnce nd lso llow the disposl vehicle driver to hndle the complete disposl procedure which cn lso be conducted during off hours. In cses where the seprtor is instlled in n opertion producing lrge mounts of sludge (ie. slughterhouses / butchers) it is recommended tht the seprtor be equipped with twin pumps one pump for the disposl of the sludge nd the second pump for the disposl of wstewter nd seprted grese. 9

10 for freestnding instlltion EsyClen Mix & Pump (M+S) Products Illustrtion Article description NS Weight Article # Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions, TeleControl Grese seprtor EsyClen Mix & Pump (M+S) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene, pumping cpcity 3.0 kw For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, inspection window with interior clening rm, M+S version mnully controlled odour free disposl, clening nd refilling system t touch of button, mintennce free mcerting motor (stinless steel bldes) for seprtor clening nd disposl, includes closure vlve for esy motor removl, motor floor mount included with instlltion hrdwre nd ntivibrtion mtt, mnul hnd vlve for trnsfer from clening to disposl mode, top mounted wter jet(s) for grese lyer brekup nd wter spry nozzles for interior wll clening during disposl, with control unit nd mins power sfety on/off switch, with BMS connections, inch mnul hnd vlve for wter refill, inch interior threded refill inlet with ir gp, 75 mm OD PN 0 pressure disposl pipe with integrted fork lift grips t bse of seprtor, low weight compct design, 00 % corrosion free polyethylene body construction (0 yer wrrnty). NS NS 55 kg 60 kg 73 kg kg 67 kg 55 kg 60 kg 73 kg kg 67 kg without SonicControl /MS /MS /MS /MS /MS with SonicControl /MS /MS /MS /MS /MS Disposl pump performnce curve H [m] 6 4 3,0 kw Q [m 3 /h] H [m] = Bckwter height 40 l OD 75 Ø = Outer dimeter b = Setup dimensions h h h3 Technicl note see pge b b Nominl size NS ) Ø Instlltion dimensions l x b b h h h Wstewter contents Sludge trp Seprtor 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese storge 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l 0

11 for freestnding instlltion Instlltion exmple EsyClen Mix & Pump (M+S) Professionl dvntges Grese seprtor ShredderMixSystem 3 Disposl line 4 Connection for disposl truck EsyClen Mix & Pump (M+S) grese seprtors re designed ccording to EN 85 nd re equipped with n utomted selfclening system s well s pumping disposl system. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the EsyClen Mix & Pump (M+S) seprtors is tht disposl cn tke plce through permnently instlled disposl lines while the twin covers of the seprtor remin closed. With this dvntge, the disposl truck cn hook up to connection on n exterior wll of the building so tht the pump of the seprtor cn pump the seprtor contents into the witing disposl truck without ny unplesnt odours escping. After the contents of the seprtor hve been pumped out, the interior of the seprtor is utomticlly rinsed nd clened with wrm wter in multistep process which is mnully controlled from the control unit. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. 5 Control unit 6 Smpling chmber 7 Lifting sttion Mnul disposl nd rinsing device ShredderMixSystem for homogenistion of the tnk contents 3.0 kw pump Clen nd odourfree disposl nd clening Simple control Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor clcultion SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice EsyClen Mix & Pump (M+S) seprtors should be instlled in ll res where nuisnce odour problems re either undesired or not llowed. In cses where the seprtor is instlled in n opertion producing lrge mounts of sludge (ie. slughterhouses / butchers) it is recommended tht the seprtor be equipped with twin pumps one pump for the disposl of the sludge nd the second pump for the disposl of wstewter nd seprted grese.

12 for freestnding instlltion EsyClen Auto Mix (D+SP) Products Illustrtion Article description NS Weight Article # Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions, remote control, TeleControl Grese seprtor EsyClen Auto Mix (D+SP) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene, pumping cpcity 3.0 kw For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, inspection window with interior clening rm, D+SP version with simultneous mixing nd clening of seprtor interior requires disposl truck with vcuum system for seprtor disposl, disposl is completely odour free, mintennce free mcerting motor (stinless steel bldes) includes closure vlve for esy motor removl, motor floor mount included with instlltion hrdwre nd ntivibrtion mtt, top mounted wter jet(s) for grese lyer brekup nd wter spry nozzles for interior wll clening during disposl, inch interior thred refill inlet with ir gp, with LCD disply control unit settble in English, Germn or French lnguge nd mins power sfety on/off switch, with BMS connections, twin inch solenoid vlves for connection of cold nd hot wter pipes to seprtor, with remote control offering full seprtor disposl control from remote loction (from disposl truck loction), 75 mm OD PN 0 pressure disposl pipe with integrted fork lift grips t bse of seprtor, low weight compct design, 00 % corrosion free polyethylene body construction (0 yer wrrnty). NS NS 50 kg 55 kg 68 kg 6 kg 6 kg 50 kg 55 kg 68 kg 6 kg 6 kg without SonicControl /DSP /DSP /DSP /DSP /DSP with SonicControl /DSP /DSP /DSP /DSP /DSP 40 l OD 75 Ø = Outer dimeter b = Setup dimensions h h h3 Technicl note see pge b b Nominl size NS ) Ø Instlltion dimensions l x b b h h h Wstewter contents Sludge trp Seprtor 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese storge 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l

13 for freestnding instlltion Instlltion exmple EsyClen Auto Mix (D+SP) Professionl dvntges Grese seprtor ShredderMixSystem 3 Control unit 4 Disposl line EsyClen Auto Mix (D+SP) grese seprtors re designed ccording to EN 85 nd re equipped with n utomticlly controlled pump for mixing nd clening of the seprtors contents nd inner wlls. These seprtors re offered with modern control unit with digitl disply. It is possible to utomte specific steps of the grese seprtor disposl process. The EsyClen Auto Mix (D+SP) seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the EsyClen Auto Mix (D+SP) seprtors is tht disposl cn tke plce through permnently instlled disposl lines while the twin covers of the seprtor remin closed. With this dvntge, the disposl truck hooks up to connection on n exterior wll of the building nd, using its own pump, suctions out the entire contents of the seprtor without ny unplesnt odours escping. The ShredderMixSystem mcertes nd liquifies its contents nd lso clens its interiror wlls ll simultneously. This prepred wstewter is then suctioned into the witing disposl vehicle. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. 5 Connection for disposl truck 6 Remote control system (optionl) 7 Smpling chmber 8 Lifting sttion Fully utomtic direct disposl with progrmcontrolled ShredderMix System for homogenistion of the tnk contents Clen nd odourfree disposl nd clening Simple control Lowmintennce opertion Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor clcultion SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice EsyClen Auto Mix (D+SP) grese seprtor is idel for instlltions where the presence of strong odours during disposl of the seprtors contents cn not be permitted. The ShredderMixSystem liquifies, mcertes nd clens the seprtors contents ll in one step. In circumstnces where lrge mounts of sludge re expected (i.e. slughterhouses / met processing plnts), the seprtor should be equipped with two mcerting pumps one pump for the wstewter nd grese, the second pump solely for the sludge. 3

14 for freestnding instlltion EsyClen Mix (D+S) Products Illustrtion Article description NS Weight Article # Illustrtion shows Art. # /DS Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions Grese seprtor EsyClen Mix (D+S) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene, pumping cpcity 3.0 kw For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, inspection window with interior clening rm, D+S version with simultneous mixing nd clening of seprtor interior requires disposl truck with vcuum system for seprtor disposl, disposl is completely odour free, mintennce free mcerting motor (stinless steel bldes) includes closure vlve for esy motor removl, motor floor mount included with instlltion hrdwre nd ntivibrtion mtt, top mounted wter jet(s) for grese lyer brekup nd wter spry nozzles for interior wll clening during disposl, inch interior thred refill inlet with ir gp, inch mnul hnd vlve for wter refill, with hnd held opertion controller, 75 mm OD PN 0 pressure disposl pipe with integrted fork lift grips t bse of seprtor, low weight compct design, 00 % corrosion free polyethylene body construction (0 yer wrrnty). NS NS 45 kg 50 kg 63 kg kg 57 kg 45 kg 50 kg 63 kg kg 57 kg without SonicControl without inspection window /DS /DS /DS /DS /DS without inspection window /DS /DS /DS /DS /DS with SonicControl with inspection window /DS /DS /DS /DS /DS with inspection window /DS /DS /DS /DS /DS 40 l OD 75 Ø = Outer dimeter b = Setup dimensions h h h3 Technicl note see pge b b Nominl size NS ) Ø Instlltion dimensions l x b b h h h Wstewter contents Sludge trp Seprtor 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese storge 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l 4

15 for freestnding instlltion Instlltion exmple EsyClen Mix (D+S) Professionl dvntges Direct disposl with ShredderMixSystem for homogenistion of the tnk contents Clen nd odourfree disposl nd clening Simple control Lowmintennce opertion Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor ShredderMixSystem 3 Disposl line 4 Connection for disposl truck 5 Smpling chmber 6 Lifting sttion Grese seprtor clcultion EsyClen Mix (D+S) grese seprtors re designed ccording to EN 85 nd re equipped with mnully controlled pump for mixing nd clening of the seprtor s contents nd inner wlls. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the EsyClen Mix (D+S) seprtors is tht disposl cn tke plce through permnently instlled disposl lines while the twin covers of the seprtor remin closed. With this dvntge, the disposl truck hooks up to connection on n exterior wll of the building nd, using its own pump, suctions out the entire contents of the seprtor without ny unplesnt odours escping. The ShredderMixSystem mcertes nd liquifies its contents nd lso clens its interiror wlls ll simultneously. This prepred wstewter is then suctioned into the witing disposl vehicle. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice EsyClen Mix (D+S) grese seprtor is idel for instlltions where the presence of strong odours during disposl of the seprtors contents cn not be permitted. The ShredderMixSystem liquifies, mcertes nd clens the seprtors contents ll in one step. In circumstnces where lrge mounts of sludge re expected (i.e. slughterhouses / met processing plnts), the seprtor should be equipped with two mcerting pumps one pump for the wstewter nd grese, the second pump solely for the sludge. 5

16 for freestnding instlltion EsyClen Stndrd (D ) Products Illustrtion Article description NS Weight Article # Illustrtion shows Art. # /D Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions Grese seprtor EsyClen Stndrd (D ) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene. For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, D version with fctory instlled pressure pipe suction outlet requires disposl truck with vcuum system for seprtor disposl, disposl is completely odour free, 75 mm OD PN 0 pressure disposl pipe with integrted fork lift grips t bse of seprtor, low weight compct design, 00 % corrosion free polyethylene body construction (0 yer wrrnty). NS NS NS 69 kg 74 kg 87 kg 35 kg 8 kg 69 kg 74 kg 87 kg 35 kg 8 kg 69 kg 74 kg 87 kg 35 kg 8 kg without SonicControl without ccessories /D /D /D /D /D with refill inlet /D /D /D /D /D without ccessories /D /D /D /D /D with SonicControl with inspection window /D /D /D /D /D with inspection window nd refill inlet /D /D /D /D /D with inspection window /D /D /D /D /D NS 69 kg 74 kg 87 kg 35 kg 8 kg with refill inlet /D /D /D /D /D with inspection window nd refill inlet /D /D /D /D /D 40 l OD 75 Ø = Outer dimeter h h h3 b Technicl note see pge Nominl size NS ) Ø Instlltion dimensions l x b h h h Wstewter contents Sludge trp Seprtor 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese storge 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l 6

17 for freestnding instlltion Instlltion exmple EsyClen Stndrd (D ) Professionl dvntges With direct disposl connection Disposl with the tnk closed Lowmintennce opertion Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor Disposl line 3 Connection for disposl truck 4 Smpling chmber 5 Lifting sttion Grese seprtor clcultion EsyClen Stndrd (D ) grese seprtors re designed ccording to EN 85. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the EsyClen Stndrd (D ) seprtors is tht disposl cn tke plce through permnently instlled disposl lines while the twin covers of the seprtor remin closed. With this dvntge, the disposl truck hooks up to connection on n exterior wll of the building nd, using its own pump, suctions out the entire contents of the seprtor without ny unplesnt odours escping. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice The EsyClen Stndrd (D ) seprtor should be inspected nd fully clened during every third disposl. In ll circumstnces where the ccessibility of the disposl truck s suction hose to the seprtor is highly limited or impossible, KESSEL recommends the instlltion of EsyClen Stndrd (D) unit. With the instlltion of the refill equipment, the seprtor cn be refilled fter disposl without the need of opening ny of the covers nd relesing strong nd ggressive odours. 7

18 for freestnding instlltion EsyClen Bsic (G ) Products Illustrtion Article description NS Weight Article # Illustrtion shows Art. # Certifiction: Z Delivery: System completely ssembled. Accessories: Smpling chmber, lifting sttions. Retrofitting up to Auto Mix & Pump (PV+S) possible. Grese seprtor EsyClen Bsic (G ) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene. For free stnding instlltion in frost protected res, with integrted sludge trp, sloped interior bse improves clening nd reduces disposl time, inlet flow clming system nd outlet flow regultion device, inlet nd outlet interchngeble, slnted twin ccess covers with quick relese odour tight snp closures, G version requires disposl truck with vcuum system for seprtor disposl, integrted fork lift grips t bse of seprtor, 00% corrosion free polyethylene body construction (0 yer wrrnty). NS NS NS 69 kg 74 kg 87 kg 35 kg 8 kg 69 kg 74 kg 87 kg 35 kg 8 kg 69 kg 74 kg 87 kg 35 kg 8 kg without SonicControl without ccessories with refill inlet without ccessories with SonicControl with inspection window with inspection window nd refill inlet with inspection window NS 69 kg 74 kg 87 kg 35 kg 8 kg with refill inlet with inspection window nd refill inlet l Ø = Outer dimeter h h h3 b Technicl note see pge Nominl size NS Ø Instlltion dimensions l x b h h h Wstewter contents Sludge trp Seprtors 00 l 400 l 300 l 300 l 400 l 400 l 700 l 650 l 000 l 900 l Grese seprtor 00 l 0 l 60 l 80 l 400 l Totl 600 l 600 l 800 l 350 l 900 l 8

19 for freestnding instlltion Instlltion exmple EsyClen Bsic (G ) Professionl dvntges With direct disposl connection Lowmintennce opertion Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions Contct us directly to discuss your requirement. Grese seprtor clcultion Grese seprtor Suction hose 3 Smpling chmber 4 Lifting sttion EsyClen Bsic (G ) grese seprtors re designed ccording to EN 85. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of every month. To empty the contents of the seprtor the odour tight covers need to be removed. The suction hose of the disposl truck is then used to empty nd rinse the inside of the seprtor. SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Scn this QR code to directly view the corresponding product video. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Notice The EsyClen Bsic (G) seprtor cn be upgrded to ny other version (with permnently instlled disposl lines) t ny time. It should only be instlled in res where: the relese of strong nd ggressive odours will not pose problem ccessing the seprtor with the disposl hose of the disposl truck will not cuse problems or inconveniences. Retrofit Sets Stndrd (D) With direct disposl connection Mix (D+S) NS 7 Pump, refill inlet, mnul hnd vlve nd direct disposl connection Auto Mix (D+SP) NS 7 Pump, refill inlet, inspection window, solenoid vlves, direct disposl connection nd control unit Mix&Pump (M+S) NS 7 Pump, refill inlet, inspection window, mnul hnd vlve, direct disposl connection nd control unit Auto Mix&Pump (PV+S) NS 7 Pump, refill inlet, inspection window, solenoid vlves, direct disposl connection nd control unit 93 0/D 93 0/DS 93 0/DS0 93 0/DSP 93 0/DSP0 93 0/MS 93 0/MS0 93 0/PVS 93 0/PVS0 9

20 for freestnding instlltion Euro Auto Mix & Pump (PV+S) Illustrtion Article description NS Weight Article # Products Delivered: Completely ssembled (pumps to be connected onsite) Accessories: Smpling chmber, distribution box, lifting sttion, SonicControl Grese seprtor Euro Auto Mix & Pump (PV+S) NS... ccording to Euro Norm EN 85, mnufctured from virgin, nonrecycled polyethylene For free stnding instlltion in frost protected res, with integrted sludge trp, polyethylene quick relese odor tight covers, with inspection window, with direct disposl hook up pipe on right side for sludge nd grese trp disposl, with disposl flnge DN 65, PN 0 (DIN 50), StorzBcoupling.5 inch for disposl truck connection, utomted switch over from clening to disposl, control unit with pnel nd 7 digit opertionl disply, mnul switch for offmnulutomtic pump opertion twin inch solenoid vlves, rinse/refill inlet ccording to DIN 988, high pressure clening/rinsing system with spry jets nd flood jets, twin exterior (right) mounted submersible (IP 68) cutting pumps (400 V, 50 Hz, with 4.0 kw >30 cbm/h t.0 Br t stndrd pumping heights), with control unit, with refill equioment, Ø 60 inlet/outlet fits SML pipe (DIN 95) nd plstic pipe (DIN 9560). NS 5 NS 0 NS 5 c. 390 kg c. 980 kg c. 00 kg Further nominl sizes on request /P /P /P Ø = Outer dimeter h l b b h h3 Nominl size NS 5 NS 0 NS 5 Ø Instlltion dimensions l x b b h h h Wstewter contents Sludge trp Seprtors 500 l 60 l 00 l 090 l 500 l 940 l Grese storge 63 l 800 l 000 l Totl 30 l 400 l 5400 l 0

21 for freestnding instlltion Instlltion exmple Euro Auto Mix & Pump (PV+S) Professionl dvntges Progrmcontrolled disposl nd rinsing device ShredderMixSystem for homogenistion of the tnk contents 3.0 kw pump Clen nd odourfree disposl nd clening Onsite grese seprtor ssembly With tem of KESSEL specilists, the grese seprtors cn lso be custom ssembled on loction. This llows lrger grese seprtor to be used in existing buildings with limited ccess to the room in which the grese seprtor will be instlled. Distribution box Grese seprtor 3 Disposl line 4 Connection for disposl truck 5 Remote control system (optionl) 6 Smpling chmber 7 Control unit 8 Lifting sttion Euro Auto Mix & Pump (PV+S) grese seprtors re designed ccording to EN 85 nd re equipped with fully utomted disposl, selfclening nd refill system. These seprtors distinguish themselves through their ese of instlltion nd nerly mintennce free chrcteristics. The dvntge of the Auto Mix & Pump seprtors is tht complete disposl cn tke plce through permnently instlled disposl lines while the covers of the seprtor remin closed. With this dvntge, the disposl truck cn hook up to connection on n exterior wll of the building so tht the pump of the seprtor cn pump the seprtor contents into the witing disposl truck without ny unplesnt odors escping. After the contents of the seprtor hve been pumped out, the interior of the seprtor is utomticlly rinsed nd clened with wrm wter in multistep utomted process. The complete procedure occurs with the press of button nd is lso vilble with remote control system so tht the driver of the disposl vehicle cn hndle the entire procedure without the necessity of ny building personnel being present. According to DIN V 4040, the complete contents of the seprtor should be emptied, the unit clened nd refilled with clen cold wter every fourteen dys or t minimum of once every month. Instlltion hints Importnt is tht smpling chmber is instlled fter the outlet of the seprtor. The seprtor is instlled completely level on flt firm surfce in frost free re. The height of the room in which the seprtor is instlled should llow esy removl nd ccess of the two lids. In the cse tht the outlet of the seprtor is locted below the locl defined bckwter level, lifting sttion is to be instlled ccording to EN 056. In situtions where the interruption of seprtor service is not llowble, lifting sttion with double pumps is to be instlled. Complete System Solution In ddition to individul grese seprtors, KESSEL lso offers complete seprtor pckges consisting of grese seprtor, properly mtched lifting sttion nd dvntgeous ccessories. All from one source KESSEL. Individul Solutions KESSEL offers fully stffed Individul Solutions Deprtment with experience in designing nd mnufcturing dringe products exctly meeting your specifictions. For dditionl informtion plese contct us directly to discuss your requirement. Grese seprtor clcultion SmrtSelect simply mkes plnning esier clcultion tool for seprtors t smrtselect.kessel.com Notice Euro Auto Mix & Pump (PV+S) seprtors should be instlled in ll res where nuisnce odor problems re either undesired or not llowed. The system llows the user to customize settings to improve disposl performnce nd lso llow the disposl vehicle driver to hndle the complete disposl procedure which cn lso be conducted during off hours. In cses where the seprtor is instlled in n opertion producing lrge mounts of sludge (ie. slughterhouses / butchers) it is recommended tht the seprtor be equipped with twin pumps one pump for the disposl of the sludge nd the second pump for the disposl of wstewter nd seprted grese.

22 for freestnding instlltion Euro G Products Illustrtion Article description NS Weight Article # Grese seprtor Euro G NS... in ccordnce with KESSEL stndrd, mde of polyethylene For freestnding instlltion in frostprotected rooms NS 0.5 NS 0.5 NS 0 kg 45 kg 65 kg Art. # Note for the operting compny: The seprted grese must be skimmed off dily in the cse of weekly emptying nd clening. Art. # Art. # Delivery: System completely ssembled. Ø = Outer dimeter Nominl size NS 0.5 NS 0.5 NS Ø Further nominl sizes on request Wstewter contents Sludge trp Seprtors 5 l 8 l 50 l 4 l 00 l 75 l Grese seprtor 5 l 30 l 60 l 00 i Technicl note: Production nd wether relted influences cn led to devitions from our specifictions in the cse of freestnding seprtors. For this reson, plese check the height specifictions in prticulr for their ctul size before instlltion. Plese dpt the pipework to the ctul inlet nd outlet dimensions before instlling the grese seprtor. Therml nd mechnicl influences must be tken into considertion.

23 for freestnding instlltion Smpling chmber / Polymer distribution box Illustrtion nd dimensioned drwing Article description Smpling chmber Ø 400 mde of polymer for seprtion systems For connection to outlet pipe of seprtor. Inlet nd outlet Ø... vilble options for synthetic mteril pipes in: PEHD (ccording to EN 59); PVCHT, PP or AS, drop height 0 mm. Cover seled odourtight with snp closure. Outlet lterl Outlet verticl Outer dimeter Ø (mm) Ø /60 Ø /60 Accessories Article # Smpling chmber Ø 450 For connection to outlet pipe of seprtor. Inlet nd outlet Ø 00 mm vilble options for synthetic mteril pipes in: PEHD (ccording to EN 59); PVCHT, PP or AS, drop height 60 mm. Cover seled odourtight with snp closure. Ø IS 450 Outlet lterl Polymer distribution box for twin (prllel) seprtor systems With inlet nd outlet connection for polymer pipes mde of: PEHD (ccording to DIN 9537); PVCHT, PP or AS. Ø Ø 60 Ø

24 for freestnding instlltion Inspection window / Refill inlet Illustrtion nd dimensioned drwing Article description Inspection window for seprtion systems EsyClen For visul inspection of the thickness of the grese lyer, with clening device, highgloss polished inspection glss with centimetre scle. Outer dimeter Ø (mm) Accessories Article # inch threded connection Refill inlet mde of polymer for seprtion systems ccording to DIN 988, for connection to filling nd rinsing connection couplings of the seprtion systems, with two pipe clmps nd ttchment element together with pipe seling gsket Ø 63. Model left inch Model right inch SonicControl / TeleControl / RemoteControl Illustrtion nd dimensioned drwing Article description SonicControl level sensing system with ultr sonic sensor for grese seprtor Accurte monitoring nd dt trnsfer of grese levels. 30 V 50 Hz power connection. With bttery bck up, connection for remote speker. Instlltion set with esy ssembly nd mintennce. For use on bove ground or below ground seprtors. For retrofit use on existing seprtors. Control unit with opticl nd udible lrm with potentil free contct. Electronic log book with month cpcity. Dt trnsfer by telemetry. Accessories Outer dimeter Ø (mm) Article # 97 8 Voltge: 30 V ~ 50 Hz Protection: IP 54 Plug: Schuko.5 m Cble length: 0 m (extendble onsite to 60 meters) TeleControl telemetric system for connection to KESSEL Comfort control units 30 Volt nd 400 Volt. Relying of full text messges to up to three mobile phones. Without SIM crd. TeleControl ntenn booster for TeleControl telemetric system incl..5 m cble to improve reception. With mgnetic bse. Antenn booster extension cble cble length.5 m Remote control Fits KESSEL Seprtion systems for free stnding instlltion, for connection to n isolted ground socket Vrint PV+S nd D+SP in ccordnce with DIN 4040 nd EN 85. Cble length 5 m

25 KESSELProduct informtion Grese sepertors mde of polyethylene for underground instlltion Grese sepertor Euro G NS 4 Grese sepertor Euro G 35 SAFE AND CLEAN ALTERNATIVE Completely ssmbled systems instlled sfely nd lmost invisibly outside the building. VARIABLE INSTALLATION DEPTHS The telescopic upper section llows esy individul instlltion depths nd dpttion to ground levels. SIMPLE AND FAST ASSEMBLY Complete chmber mde in one piece nd ightweight PE (polyethylene) mteril mke it esy to plce in excvtion pit. OPTIMUM DISPOSAL TIME SonicControl Lyer thickness mesuring device with ultrsonic sendsor* For the mesurement, disply nd control of the grese lyer thickness nd the wter temperture. *optionl MORE FLEXIBLE PLANNING Grese sepertor instlled in the ground outside the building leves more spce in the cellr. SIMPLE DISPOSAL OF WASTEWATER Clened wstewter flows though nturl grdient into the sewge chnnel. No dditionl pump is required for this. 5

26 for underground instlltion Euro PV+S Illustrtion NS Weight NS NS 70 kg 300 kg 35 kg 550 to to to 950 Products Instlltion depth Cover clss A/B Cover clss D D in mm Article # Article # 93 00/80BKP 93 00/80BKP /80BKP 93 00/80DKP 93 00/80DKP /80DKP NS NS 70 kg 300 kg 35 kg 55 kg 550 kg 800 to to to to to /0BKP 93 00/0BKP /0BKP /0BKP 93 00/0BKP 93 00/0DKP 93 00/0DKP /0DKP /0DKP 93 00/0DKP Certifiction: Z ( / 0) Grese seprtor Euro PV+S NS... with progrmcontrolled disposl system nd ShredderMix system ccording to EN 85 nd DIN , mde of polyethylene mteril, pumping cpcity.6 kw For underground instlltion Upper section mde of polymer mteril, continuous height nd level compenstion, with cover, clss A/B, D ccording to EN 4 mde of cst iron (cn be driven over by crs nd trucks), seled odourtight, incl. removl mechnism. for underground instlltion frostfree depth 800 mm for underground instlltion frostfree depth 00 mm Resistnt when instlled in the groundwter up to the lower edge of the drin outlet. A lod distribution plte must be plnned for clss D. Delivery: System completely ssembled. Further nominl sizes on request. Onsite connection pipes (see connection ccessories) Nominl size NS NS Ø b h Accessories see pge 88: Jointing / connection set, disposl chmber Ø 400 smpling chmber, intermedite section, SonicControl. Pumping sttions see chpter 3 lifting sttions. h h Sludge 40 l 00 l 400 l 700 l 000 l Grese 70 l 0 l 60 l 80 l 400 l Totl (including wter) 370 l 570 l 770 l 800 l 600 l D = Instlltion depth Ø = Outer dimeter h h b h D h D h Grese seprtor NS Grese seprtor 0 Engineering systems chmber b 6

27 for underground instlltion Euro G Illustrtion NS Weight NS NS kg 0 kg 30 kg Products Instlltion depth Cover clss A/B Cover clss D D in mm Article # Article # 550 to to to /80 B 93 00/80 B /80 B 93 00/80 D 93 00/80 D /80 D NS NS kg 0 kg 30 kg 800 to to to /0 B 93 00/0 B /0 B 93 00/0 D 93 00/0 D /0 D Delivery: System completely ssembled. Accessories see pge 88: Smpling chmber, extension section, direct disposl, SonicControl (NS nd ). Pumping sttions see chpter 3 lifting sttions. Certifiction: Z Chnge pending Grese seprtor Euro G NS //4 in ccordnce with EN 85 nd DIN , mde of polyethylene For underground instlltion Upper section mde of polymer, infinite height nd level djustment, with cover clss A/B, D in ccordnce with EN 4 mde of cst iron, seled odourtight, incl. liftout key. for ground instlltion frostfree depth 800 mm h Inlet D h h Outlet D = Instlltion depth Ø = Outer dimeter b for ground instlltion frostfree depth 00 mm Resistnt when instlled in the groundwter up to 500 mm A lod distribution plte must be provided for clss D. Further nominl sizes on request Nominl size NS NS Ø b h ) h h Sludge 40 l 00 l 400 l ) Specifictions pply for type 80. For type 0, h* = h + 50 mm. Grese 70 l 0 l 60 l Totl (including wter) 370 l 570 l 770 l Direct disposl / disposl chmber Illustrtion Accessories Article description Illustrtion Article # Direct disposl for grese seprtors without disposl chmber Disposl connection right Disposl connection left Direct disposl for grese seprtors including disposl chmber Ø 400 Disposl connection right Disposl connection left Disposl chmber Ø Joint nd connection set mde of polyethylene

28 for underground instlltion Euro G Illustrtion NS * * NS 5* NS 0* NS Weight Clss D 450 kg 480 kg 630 kg 670 kg 765 kg 765 kg 765 kg Delivery: System completely ssembled. 745 to to to to to to to /0 B 93 00/0 B 93 05/0 B 93 00/0 B 93 95/0 B /0 B /0 B Products Instlltion depth Cover clss A/B Cover clss D D in mm Article # Article # /0 D 93 00/0D 93 05/0D 93 00/0 D 93 95/0 D /0 D /0 D Accessories see pge 88: Smpling chmber, extension section, direct disposl, SonicControl. Pumping sttions see chpter 3 lifting sttions. * Certifiction: Z ( 0) Chnge pending Grese seprtor Euro G /0/5/0/5/30/35 in ccordnce with EN 85 nd DIN , mde of polyethylene For underground instlltion Upper section mde of polymer, height nd level djustment, with cover clss A/B, D in ccordnce with EN 4, mde of cst iron (cn be driven over by crs nd trucks), seled odourtight, incl. liftout key. for ground instlltion: frostfree depth Minimum instlltion depth chieved by swing the upper section s required Instlltion is possible with groundwter up to the upper edge of the tnk (UET). A lod distribution plte must be provided for clss D. Further nominl sizes on request D h Nominl size NS 5 NS 0 NS UET Ø DEC** L L mx D = Instlltion depth Ø = Outer dimeter L B h h h B Sludge 700 l 000 l 500 l 000 l 500 l 3000 l 3500 l Grese 0 l 600 l 800 l 3800 l 5300 l 4800 l 4800 l DDEC 55 mm 55 mm 80 mm 80 mm 480 mm 480 mm 330 mm **DEC = Depth of erth coverge Clss D = 700 mm DEC 500 mm Clss A/B = 700 mm DEC 800 mm Totl (incl. wter) 800 l 600 l 4300 l 5800 l 7800 l 7800 l 8300 l Lmx mm Direct disposl / disposl chmber Illustrtion Accessories Article description Illustrtion Article # Direct disposl for grese seprtors without disposl chmber Disposl connection right Disposl connection left Direct disposl for grese seprtors including disposl chmber Ø 400 Disposl connection right Disposl connection left Disposl chmber Ø Joint nd connection set mde of polyethylene 97 4 i Technicl note: Wetherrelted influences or cooling of the tnks during the instlltion phse (cused by filling with cold wter) cn led to devitions in dimensions from the ctlogue specifictions in the cse of cisterns nd seprtors instlled in the ground. 8

29 for underground instlltion Grese seprtor in ccordnce with EN 85 Illustrtion nd dimensioned drwing 60 D Article description Smpling chmber Ø 000 in polyethylene, for seprtion systems, for underground instlltion Instlltion depth (D) mm (Other instlltion depths vilble on request) Inlet nd outlet Ø... for synthetic mteril pipes in: PEHD (ccording to EN 666); PVCKG (ccording to EN 40); PP or AS. With integrted ccess steps, with telescopiclly heightdjustble upper section mde of polymer, with cover clss A/B, D ccording to EN 4 in cst iron seled odourtight, incl. removl mechnism. Drop height 60 mm. Cover clss A/B Cover clss D Extension section mde of polymer, Ø 600 height increse: 44 mm Ø 800 height increse: 445 mm Outer dimeter Suitble for Ø (mm) grese seprtor Ø Ø 60 Ø 00 Ø Ø 60 Ø 00 NS /NS / nd NS 5, NS 0 nd custommde NS /NS / nd NS 5, NS 0 nd custommde Accessories Article # B B B D D D Avilble beginning July Extension section mde of polymer for seprtion systems Fits ll KESSEL Seprtion systems for underground instlltion, extension height 50 mm / 00 mm; incl. gsket smller/lrger extension sections vilble on request Extension height 50 mm Extension height 00 mm D Smpling chmber Ø 400 in polymer, for seprtion systems, for underground instlltion Instlltion depth (D) mm (minimum instlltion depth cn be chieved by cutting off) For connection to outlet pipe of seprtor. Telescopic upper section with clmping ring, cover clss A/B/D, seled odourtight, without removl mechnism, drop height 0 mm. Drop height 60 mm on request. Cover clss A Cover clss B 3 Cover clss D Extension by 600 mm with extension section Art. # Ø /50 Ø 00 Ø /50 Ø 00 Ø /50 Ø A A B B D D00 Extension section For deep instlltion Extension height mx. 600 mm (cn be shortened onsite). Check mintennce ccessibility when instlling in recesses! For smpling chmber Ø

30 for underground instlltion Grese seprtor in ccordnce with EN 85 Illustrtion nd dimensioned drwing Article description SonicControl level sensing system with ultr sonic sensor for grese seprtor Accurte monitoring nd dt trnsfer of grese levels. 30 V 50 Hz power connection. With bttery bck up, connection for remote speker. Instlltion set with esy ssembly nd mintennce. For use on bove ground or below ground seprtors. For retrofit use on existing seprtors. Control unit with opticl nd udible lrm with potentil free contct. Electronic log book with month cpcity. Dt trnsfer by telemetry. Voltge: 30 V ~ 50 Hz Protection: IP 54 Plug: Schuko.5 m Cble length: 0 m (extendble onsite to 60 meters) Accessories Audible lrm Art. # 0 6, 5 m cble extension vilble upon request. PEHD Cble ccess conduit Art. # 97 8 Cble extension set for SonicControl 0 m extension 0 m extension 30 m extension Outer dimeter Ø (mm) Accessories Article # Cble ccess conduit Required for wtertight connection of SonicControl cble into seprtor chmber (for underground seprtors conduit pipe with chse wire should be plnned) 97 8 TeleControl telemetric system for connection to KESSEL Comfort control units (lifting sttions nd seprtors) 30 Volt nd 400 Volt. Relying of full text messges to up to three mobile phones. Without SIM crd TeleControl ntenn booster for TeleControl telemetric system incl..5 m cble to improve reception. With mgnetic bse Antenn booster extension cble cble length.5 m Remote Control mounting re StorzBCoupling connection Stinless steel ccess pnel For recessed wll instlltion with StorzB disposl pipe hook up connection nd remote control connection for use with fully utomted grese seprtors. Remote control not included. Dimensions: 640 x 440 x 60 mm (Width x Height x Depth) Model: Recessed, doors, lockble Remote Control mounting re StorzBCoupling connection Stinless steel ccess pnel For wll instlltion with StorzB disposl pipe hookup connection nd remote control connection for use with fully utomted grese seprtors. Remote control not included. Dimensions: 600 x 400 x 60 mm (Width x Height x Depth) Model: Wll instlltion, doors, lockble

31 Size Clcultion KESSELClcultion for Grese Seprtors Bsed on EuroNorm EN 85 The KESSEL clcultions sheets listed below serve to properly size the seprtor to its fcility nd lso to help choose the proper model.. Generl Informtion..Project/Loction Project / Site loction Builder Plnner Version.. Fcility Cre fcility (retirement home) Slughter /Met processing plnts Oil / grese processing plnts Hotel kitchen Met processing plnt (with slughtering) Butter / mrgrine mnufcturer Fine cuisine kitchen Met processing plnt (without slughtering) Cooking oil refinery Business kitchen / cfeteri Butcher with slughtering Oil mnufcturer Hospitl / University kitchen Butcher without slughtering Prepred mel mnufcturer All dy service kitchen Supermrket with met processing Fish processing plnt Stndrd resturnt Poultry slughterhouse.3. Times of opertion Dily opertion Weekly opertion Wstewter dischrge hours / dy dys /week continuous discontinuous.4. Legl limits for wstewter entering public / privte sewge systems (Consult locl sttutes or locl wter uthority for legl limits / concentrtions) Vlues to be identified t the wstewter s point of entry into the (public) sewge system Wstewter temperture C Allowble phvlue Sponifible oils nd greses (lipophilic substnce) C phvlue mx mg/l 3

32 Size Clcultion. Sizing the grese seprtor (NS liters / second).. Clculting the mximum wstewter flow Q S Methode : QsClcultion bsed on mximum wstewter flow during pek kitchen opertion mesured with flow metering device Mesured flow Q S : l/s Q S = l/s Methode : Q S Clcultion bsed on types of kitchens The mximum wstewter flow is clculted for either ) commercil kitchens or b) met processing plnts bsed on volume nd type of wstewter. ) Commercil kitchen Clculting mximum wstewter flow Q S Q S = l/s Eqution V M : wstewter volume per wrm mel in liters (l) (See Tble ) Q S = V M x F x M M t x 3600 F: Surge fctor relevnt to of opertionl conditions (See Tble ) M M : Monthly verge of the DAILY prepred wrm mels (vg. mels per dy) Inputs Q S = x x x 3600 t: Averge hours of opertion when the seprtor will be receiving ft lden wstewter Tble (Types of fcilities) Types of commercil kitchens V M (liters) F M M (kg) t (hours) Hotel resturnt kitchen 00 5 Fine cuisine resturnt kitchen 50 8,5 Fst food resturnt kitchen 5 0 Hospitl / Retirement fcility kitchen 0 3 Militry bse brrcks kitchen 0 Stndrd resturnt kitchen 5 0 b) Met processing plnts Clculting mximum wstewter flow Q S Q S = l/s Eqution Q S = V P x F x M P t x 3600 V P : fcility specific wstewter volume per kilogrm met / susge production in liters (l) (See Tble ) F: Surge fctor irrelevnt of opertionl conditions (See Tble ) Inputs Q S = x x x 3600 M P : Dily verge of met / susge production (kg) t: Averge hours of opertion when the seprtor will be receiving ft lden wstewter Tble (Met processing fcilities) Met processing fcilities V M (liters) F M M (kg) t (hours) Smll up to 5 lrge livestock* 0 30 Medium up to 0 lrge livestock* 5 35 Lrge up to 40 lrge livestock* 0 40 * lrge livestock = cow (cttle) =.5 pigs 3

33 Size Clcultion. Sizing the grese seprtor (NS liters / second) Methode 3: Q S Clcultion bsed on ctul fixtures instlled in kitchen This clcultion is bsed on summing the mximum output (flow) of ech fixture (kettles, rinse downs, dishwshing mchines, etc.) Clculting mximum wstewter flow Q S(K) from kitchen fixtures Q S(K) = l/s Tble 3 (Wstewter flow (Q S(K) in liters / second) from kitchen fixtures Totl cooking kettle tiltble cooking sinks with sinks without Dishwshing frying pns pressure mchine titble frying High Peeling Vegetble number (outlet) kettle (outlet) odor trp odor trp floor wshing (n) Ø 45 Ø 50 Ø 75 Ø Ø 40 Ø 50 Ø 40 Ø 50 mchine pns wsher * mchine n > 0 n x 0. n x 0.4 n > 0. n x 0.6 n x 0.6 n x 0.3 n x 0.5 n x 0.8 n x 0.6 n x 0. n x 0.0 n x 0.4 n x 0.3 n x 0.4 Totl *Potto peeling mchines re to be connected to n independent strch seprtor. The clcultion below is bsed on summing the mximum output (flow) of ech kitchen fucet. Plese note tht if fixture in the bove tble hs lredy been included for clcultion (for exmple sink) tht the fucet connected to this sink Q S(A) = l/s should not be counted. This would result in double counting certin vlues. Plese count one or the other. Totl number of fucets (n) Outlet size (inches) DN 5 DN 0 DN 5 R / R 3 / 4 R n > 0 n x 0. n x 0. n x 0.34 Totl Clculting mximum wstewter flow Q S(A) from kitchen fucets Q S(A) = l/s Tble 4 (Wstewter flow (Q S(A) in liters / second) from kitchen fucets Q S Clcultion bsed on ctul fixtures instlled in kitchen Totl mximum output from ll kitchen fucets nd fixtures in liters per second Q S = Q S(K) + Q S(A) 33

34 Size Clcultion. Sizing the grese seprtor (NS liters / second).. Clcultion of influencil fctors The following three fctors (f d, f t, f r ) re required to properly size grese seprtor.... Clcultion of density fctor f d f d = Density of oils nd fts t 0 C up to 0.94 g/cm 3.0 over to 0.94 g/cm 3.5* Density fctor f d *for substnces such s cstor oil, wool ft, resin / rosin oil, beef drippings. For wstewter from kitchens, resturnts, hospitls, slughter/met proecessing plnts s well s fish processing plnts density fctor (f d ) vlue of is generlly pplicble.... Wstewter temperture fctor f t f t = Incoming wstewter temperture Temperture fctor f t up to 60 C.0 over to 60 C Clener (detergent) solution fctor f r f r = Are stndrd cleners used in the kitchen? Clener solution fctor f r No.0 Yes.3 In specil circumstnces (Hospitl for exmple) clener solution fctor of fr.5 could be required..3. Clculting the seprtor size (NS) (liters / second) ccording to DIN V 4040, dte 0/999 NS = Q S x f d x f t x f r NS = x x x = Approprite uthority Applicnt loction, dte signture loction, dte signture 34

35 Size Clcultion 3. Choosing the type of grese seprtor 3.. Clculting the sludge trp volume Resturnts, hotels: cfeteris, met processing plnts without slughter, etc. NS x 00 liter = liter Slughter houses: met processing plnts with slughter NS x 00 liter = liter 3.. Type of grese seprtor Instlltion loction: free stnding in frost free re Delivery to instlltion site Smllest pssge through which seprtor must pss: L x W = mm x mm Mke nd Type of free stnding grese sepertor: Version G Stndrd seprtor (Mnul disposl nd clening through opened covers) Instlltion loction: Underground instlltion in frost free res Outdoor underground instlltion. Groundwter susceptible re Mke nd Type of underground grese seprtor: Version G Stndrd underground seprtor (Mnul disposl nd clening through opened covers, outdoors) Version D Stndrd seprtor* (Mnul disposl through permnently instlled disposl pipe, clening through opened covers) Version D+S Comfort seprtor* (Automted clening nd mnul disposl through permnently instlled disposl pipe) Version E+S M Comfort seprtor* (Control unit controlled disposl nd clening through permnently instlled disposl pipe) Version E+S PV Comfort seprtor* (Remote controlled disposl nd clening through permnently instlled disposl pipe) Version SE for self disposl* (Self disposl of sludge nd grese into seprte 60 liter storge tnks) Version D Stndrd underground seprtor (Mnul disposl through permnently instlled underground disposl pipe, clening through opened covers, outdoors) Mdetoorder versions on request Instlltion depth D: The locl frost free depth must be considered. T is mesured from ground level to the bottom of the inlet of the grese seprtor. D = mm * Desired position of ccessories (in direction of flow): Mnhole covers: Inspection window left right Disposl hookup left right Refill pumps left right Clss B (.5 ton) pssenger cr Clss D (40 ton) trctor triler Accessories Inspection window on left side (in direction of flow) Inspection window on right side (in direction of flow) Refill equipment on left side (in direction of flow) Refill equipment on right side (in direction of flow) Smpling chmber with lterl outlet Smpling chmber with verticl outlet Pump/ lifting sttion Smpling chmber Pump in collection chmber 3.3. Chosen grese seprtor Grese seprtor / Accessories Article Number 35

36 Colescence seprtor KESSEL AG with DIBt pprovl Bhnhofstrsse Lenting Germny Oil/Fuel seprtor with DIBt pprovl You cn find your locl contct on the KESSEL website: Rights reserved for technicl chnges 0038 KA/CK 0/6

Cable Trolleys for C-Rails Program

Cable Trolleys for C-Rails Program Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble

More information

JUMO MIDAS S05 OEM pressure transmitter - universal

JUMO MIDAS S05 OEM pressure transmitter - universal Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:

More information

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets

ABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd

More information

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks

JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,

More information

Spark Plug Fouling 3.0 Liter OptiMax

Spark Plug Fouling 3.0 Liter OptiMax WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected

More information

Product range MEGAlife

Product range MEGAlife Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.

More information

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10

@ ECV Technical Data High Lift Pallet Truck. ECV 10 C ECV 10i C ECV 10 @ ECV Technicl Dt High Lift Pllet Truck ECV 10 C ECV 10i C ECV 10 Lifting Mde Esy This specifiction sheet to VDI Guideline 198, only provides the technicl vlues for the stndrd truck. Different tyres, other

More information

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION

DIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2) UL SAFE - 15 OR 19 DISPLAY THROUGH THE WALL 330mm (13) PLAN VIEW FRONT ELEVATION SECTION L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)

Installation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB) Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl

More information

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS

DIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13) MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE

More information

HAZET Range of Pullers / Extractors

HAZET Range of Pullers / Extractors HAZET Rnge of 2-Arm Pullers Forged qulity 3-Arm Pullers Prcticl nd proven tools Hydrulic Pullers New innovtive rnge of pullers ll ering Extrctors For industry, utomotive sector, commercil see Specilty

More information

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve

4/3, 4/2 and 3/2 explosion-proof solenoid directional valve 01/06 4/3, 4/2 nd 3/2 explosion-proof solenoid directionl vlve Type G...WE6...L6X 2.21 Size (NG) 6 Up to 350 br Up to 80 L/min Contents Function nd configurtion Specifictions 03 Spool symbols 03 Technicl

More information

AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1

AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX SI R1 d03161 RECOMMENDED AIRCRAFT ENGINES SERVICE INSTRUCTION ENGINE START AT LOW TEMPERATURES AT ROTAX ENGINE TYPE 912 AND 914 (SERIES) Repeting symbols: Plese, py ttention to the following symbols throughout

More information

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.

The widest range to provide the optimum tailor made solutions to your fume and gas extraction needs. FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic

More information

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES

STANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16) CEN I, CEN III GAS or CEN IV GAS SAFES L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00

More information

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.

Precision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1. Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15 L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL

WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL

More information

UPS Pure Sinewave UPS

UPS Pure Sinewave UPS UPS Pure Sinewve UPS USR S MANUAL 1.6K / 3.2K / 5KVA 6.4K / 8K/ 10KVA 1. INTRODUCTION 1. 1.1 Generl Description This UPS, powerful ll-in-one solution, delivers unsurpssed clen true sine wve output power

More information

Brazed heat exchanger XB

Brazed heat exchanger XB Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the

More information

CS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")

CS 7750 FULL FUNCTION TERMINAL 15 OR 19 DISPLAY - THROUGH THE WALL 330mm (13) L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE

More information

CC-410 KIT SERIES INSTRUCTION SHEET

CC-410 KIT SERIES INSTRUCTION SHEET (COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN

More information

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL

Electrically operated directional spool valve with a soft-shift function type WE10P NS 10. up to 35 MPa up to 120 DATA SHEET - OPERATION MANUAL LICTION Electriclly operted directionl spool vlve with soft-shift function type WE10 NS 10 Electriclly operted directionl spool vlve type WE10 is intended for chnging the direction of fluid flow in hydrulic

More information

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02

CONTROL VALVES FOR GRINDER. Installation, Maintenance and Operating Instructions 5 GA 71 en Issue 5/02 CONTROL VALVES FOR GRINDER Instlltion, Mintennce nd Operting Instructions 5 GA 71 en Issue 5/02 2 Tble of Contents 1 OPERATION......................... 3 1.1 Generl......................... 3 1.2 Min components.................

More information

SMP-BC Mixproof Valve

SMP-BC Mixproof Valve . kythe Proven Mixproof Rnge SMP-BC Mixproof Vlve Concept SMP-BC is snitry pneumtic set vlve, designed for sfety nd lek detection when two different products flow through only one vlve. The vlve is often

More information

330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS

More information

203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY

203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8) MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve

Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN

More information

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION

* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19 DISPLAY FRONT ELEVATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE

More information

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6

4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6 4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used

More information

JET PUMP. Table of Contents. Section 5 - Jet Pump

JET PUMP. Table of Contents. Section 5 - Jet Pump Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................

More information

CCS-810 KIT SERIES INSTRUCTION SHEET

CCS-810 KIT SERIES INSTRUCTION SHEET (COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED

More information

OPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT

OPTIONAL 178mm (7) SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6) 330mm (13) MAXIMUM WALL THICKNESS IN AREA OF UNIT L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND

More information

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique

More information

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS

SEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH

More information

Welcome Home W W W. G O M A Y N E. C O M

Welcome Home W W W. G O M A Y N E. C O M Welcome Home W W W. G O M A Y N E. C O M Myne hs revolutionized outdoor decor with eutiful collection of Plnters, Window Boxes, Mil Posts, Address Signs, nd Storge Bins. Our polyethylene nd vinyl products

More information

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES

DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15 DISPLAY OR 19 DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL

More information

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007

RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007 Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button

More information

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL

CS 7780 FULL FUNCTION DRIVE-UP TERMINAL L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE

More information

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally)

FUEL SYSTEM. Section 3A Pulse Crankcase Driven Fuel Pump. Model 200/225 DFI. 1. Fuel Pressure/Vacuum Gauge (0-15 psi) (Obtain Locally) FUEL SYSTEM Section 3A Pulse Crnkcse Driven Fuel Pump Tle of Contents Specifictions................................ 3A-1 Specil Tools................................ 3A-1 Fuel Pump..................................

More information

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7

DIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE

More information

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation

3/3, 4/2 and 4/3 directional poppet valve with solenoid actuation 3/3, 4/2 nd 4/3 directionl poppet vlve with solenoid ctution RE 22035/06.10 Replces: 12.08 1/16 Type SEC Size 6 Component series 1X Mximum operting pressure 420 r [6100 psi] Mximum flow 25 l/min [6.6 US

More information

4/2- and 4/3-way shut-off valve

4/2- and 4/3-way shut-off valve Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure

More information

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

POWER TRIM. Table of Contents. Section 5D - Auto Trim II SERVICE MANUAL NUMBER 14 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II 1 B Auto Trim II System................. 5D-2 Description...................... 5D-2 Auto Trim II Opertion...............

More information

Cooling Efficiency 2017/2018 Cooling Equipment Rebate Application

Cooling Efficiency 2017/2018 Cooling Equipment Rebate Application Business Appliction Cooling Efficiency 2017/2018 Cooling Equipment Rebte Appliction For use with invoices dted on or fter Jnury 1, 2017 OID: (Internl use only) Business customer informtion Compny nme Dte

More information

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2) UL SAFE - 15 DISPLAY OR 19 DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION

3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2) UL SAFE - 15 DISPLAY OR 19 DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR

More information

6/2 way directional valve type 6/2UREM6 and 6/2URMM6

6/2 way directional valve type 6/2UREM6 and 6/2URMM6 6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...

More information

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273

Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273 Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd

More information

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts

MANN+HUMMEL Oil-bath air cleaner Single-stage air cleaner without spare parts MANN+HUMMEL Oil-th ir clener Single-stge ir clener without spre prts 57 Oil-th ir clener: Servicing without spre prts The proven oil-th ir cleners from MANN+HUMMEL re suitle for light to medium dust conditions

More information

CCD-493 KIT SERIES INSTRUCTION SHEET

CCD-493 KIT SERIES INSTRUCTION SHEET (COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED

More information

The quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB

The quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging

More information

POWER TRIM. Table of Contents. Section 5D - Auto Trim II

POWER TRIM. Table of Contents. Section 5D - Auto Trim II SERVICE MANUAL NUMBER 11 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II Auto Trim II System................... 5D-2 Description........................ 5D-2 Auto Trim II Opertion.................

More information

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL

COIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE

More information

tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves

More information

Electrically controlled directional control poppet valve type UREZ6

Electrically controlled directional control poppet valve type UREZ6 LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion

More information

9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL

9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL 00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND

More information

The original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.

The original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED. Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when

More information

Designed for. Irismo & Glydea SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glydea 35e Glydea 60e.

Designed for. Irismo & Glydea SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glydea 35e Glydea 60e. Designed for Irismo & Glyde SOLUTIONS FOR MOTORIZED DRAPERIES Irismo 45 WireFree RTS Irismo 35 Mini DC Glyde 35e Glyde 60e convenience IRISMO AND GLYDEA EXPANDS YOUR OPPORTUNITIES Tody, drpery motoriztion

More information

Commercial Condensing Units

Commercial Condensing Units COMMERCIAL C O N D E N S I N G UNITS Commercil Condensing s Heronhill Air Conditioning AN INTRODUCTION TO... Commercil Condensing s J & E Hll Fusion nd Fusion Scroll units offer the perfect solution for

More information

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see "Technical data")

Hot Air Thermostats. WTHc series. Special features. Brief description. Switching function. Approval/approval marks (see Technical data) Delivery ddress: Mckenrodtstrße 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Phone: +9 66 6003-0 Fx: +9 66 6003-607 E-mil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex CM0 DY, UK Phone: + 79 635533

More information

Data Sheet T /4/5/6 EN

Data Sheet T /4/5/6 EN Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves

More information

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation

2/2, 3/2 and 4/2 directional seat valve with mechanical, manual or fluidic operation /, / nd / directionl set vlve with mechnicl, mnul or fluidic opertion RE 0/10.06 /1 ype M-.S.. Sizes 6 nd 10 Component series X Mximum operting pressure 0/ r Mximum flow 0 l/min H701+70+70 le of contents

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl

More information

CORD/CORDLESS CLIPPER INSTRUCTIONS

CORD/CORDLESS CLIPPER INSTRUCTIONS CORD/CORDLESS CLIPPER INSTRUCTIONS Plese red ll instructions crefully to fmilirise yourself with your new clipper efore using. Sve these instructions for further reference. For ny further ssistnce or informtion

More information

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4

Special Valves. Connection size G1/8 to G2. Contents Version Actuation Port size Page Characteristics. Instructions Overview. Electrical G1/8 G1/4 Contents Version Actution Port size Pge Chrcteristics Dimensions 3/2, 5/2 nd 5/3 Wy Vlves with NAMURconnections Series S9 5/2 Wy Vlves for Two Hnd Opertion Series S9 Time Dely Vlve for 2-Hnd Sfety Strt

More information

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)

Push-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL) elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk

More information

Spring Return DuraDrive Two-Position Actuator

Spring Return DuraDrive Two-Position Actuator MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures:

More information

Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint

Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of

More information

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents

VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx

More information

Convenience electronics

Convenience electronics Convenience electronics Displys on "opening" the roof To gurntee high level of sfety, roof movement is ccompnied, depending on the equipment vrint, y opticl, coustic nd/or text displys/indictions. The

More information

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2

KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION

More information

GUARDIAN VERTICAL MOUNTING

GUARDIAN VERTICAL MOUNTING GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with

More information

Floor Scrubs Squeegees Handles Hand Brushes Shovels and Scoops Scrapers Tube Brushes Wall Brackets Metal Detectable

Floor Scrubs Squeegees Handles Hand Brushes Shovels and Scoops Scrapers Tube Brushes Wall Brackets Metal Detectable »» Brooms»» Floor Scrubs»» Squeegees»» Hndles»» Hnd Brushes»» Shovels nd Scoops»» Scrpers»» Tube Brushes»» Wll Brckets»» Metl Detectble hygiene nd food hndling WWW.SITECRAFT.COM.AU BROOMS Yrd Brooms With

More information

FRONT SIDE FIX WINDOW

FRONT SIDE FIX WINDOW WINSHIEL/WINOWGLSS/MIRROR FRONT SIE FIX WINOW REPLEMENT FRONT SIE FIX WINOW The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion

More information

Metering pumps LK series

Metering pumps LK series PDF-A 00-07 Metering pumps LK series Applicble to the mny diverse needs of chemicl Accurte trnsfer of strong cid Proportionl feeding of dditive Automtic dilution of chemicl liquid Chemicl liquid concentrtion

More information

MX-X, MX-Q Technical data.

MX-X, MX-Q Technical data. MX-X, MX-Q Technicl dt. Order picking truck with turret hed. Order picking truck with telescopic forks. Achieve more. MX-X. Order picking truck with turret hed. A modern, new-genertion truck concept with

More information

REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration.

REPLACEMENT. 4. REMOVE WINDSHIELD MOULDING OUTSIDE (a) Using a knife, cut off the moulding, as shown in the illustration. 7012 REPLCEMENT The instlltion procedures re the removl procedures in reverse order. However, only instlltion procedures requiring dditionl informtion re included. 1. REMOVE ROOF HEDLINING SSY (See pge

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge

More information

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated. Replaces HA /2009

RPE3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated.  Replaces HA /2009 Directionl Control Vlves Solenoid Operted RE3-06 Size D 06 (03) 350 br (5076 SI) 80 L/min(21 GM) Size D 06 (03) p mx 320 br (4641SI) ccording to CSA 80 L/min(21 GM) HA 4010 11/2011 Replces HA 4010 12/2009

More information

TopWing - Air heater TLHD

TopWing - Air heater TLHD TopWing - Air heter TLHD 1 TopWing Air heter TLHD The TLHD unit is extremely quiet nd in comintion with the continuous speed control, the TopWing concentrtes on the essentil while reducing noise. The ir

More information

SSAB Water mains PIPES AND FITTINGS

SSAB Water mains PIPES AND FITTINGS SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted

More information

Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance

Fire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction

More information

LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption

LTV 29-2 and 39-2 angle nutrunners. Higher speed, lower energy consumption LTV 29-2 nd 39-2 ngle nutrunners Higher speed, lower energy consumption Thumbs up for the LTV 9 series in customer trils LTV 29 tril rouses Ford s interest The Ford plnt in Cologne, Germny, with cpcity

More information

BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve

BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,

More information

Boiler room components 0861EN April 2017 Distribution and regulation units

Boiler room components 0861EN April 2017 Distribution and regulation units oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling

More information

Press control block PSB Type approved according to DIN EN 693

Press control block PSB Type approved according to DIN EN 693 Press control lock PS Type pproved ccording to DIN EN 693 Description The press control locks PS in the nominl sizes 06 nd 0 re modulr control locks with EC type pprovl for use in hydrulic presses ccording

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize

More information

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006

RPE3-06. Functional Description HA /2008. Solenoid Operated Directional Control Valves. Replaces HA /2006 Solenoid Operted Directionl Control Vlves RE3-06 10/2008 Size 06 p mx up to 320 br Q mx up to 80 L/min Replces 11/2006 4/3, 4/2 wy directionl control vlves Solenoids cn be turned round their xis to ny

More information

2/2 Solenoid Operated Seat Valve, ISO Size 03

2/2 Solenoid Operated Seat Valve, ISO Size 03 2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 20 l/min (5.3 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, with EX-sfty sol. coil Vlve: With crtridge vlve,

More information

FINGER STRIPS. and other EMI shielding products. Characteristics

FINGER STRIPS. and other EMI shielding products. Characteristics BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used

More information

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03

2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03 2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted

More information

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24

POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24 POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6

More information

MO series. Low Level Order Picker 1,000kg / 2,000kg / 2,500kg

MO series. Low Level Order Picker 1,000kg / 2,000kg / 2,500kg MO series Low Level Order Picker 1,000kg /,000kg /,500kg Scooter control steering device enhnces ergomics nd productivity Extended model rnge nd option offering for tilored solution CANbus techlogy nd

More information

Solenoid Pilot Operated Directional Control Valve

Solenoid Pilot Operated Directional Control Valve Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl

More information

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series) Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type

More information

Blocked for new applications / Für Neuanwendung gesperrt

Blocked for new applications / Für Neuanwendung gesperrt locked for new pplictions / Für Neunwendung gesperrt RE 29 075/05.02 Replces: 02.0 roportionl directionl vlve, pilot operted with electricl position feedbck ype 4WRKE Nominl sizes 0 to 35 Series 3 Mximum

More information

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2

DPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2 Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.

More information

Glydea TM Range. Motorization for draperies

Glydea TM Range. Motorization for draperies Glyde TM Rnge E x p n d i n g h o r i z o n s Motoriztion for drperies Glyde brodens your horizons Tody, drpery motoriztion is becoming the stndrd for hotel rooms, meeting venues, conference centers nd

More information