Lighting for: Healthcare

Transcription

1 Lighting for: Healthcare First Edition

2 LED Grid LED Modular Luminaires

3 LED Grid LED Modular Luminaires Features: IP44 or IP65 High performance Samsung LEDs Choice of three LED light outputs Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a modular fluorescent Average 60,000 hrs LED life - maintenance free Wall or ceiling mounting Hygienic sealed unit Remote plug in driver with connection Minimalistic design Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 only Remote plug in driver with 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) LED colour temperatures: 3500K - white 5000K - daylight, available on request Material: Body: steel Lens: polycarbonate Finish: Body: white Lens: opal Spares Photometrics available on request C0 / C180 C90 / C270 All components are available from Lamps and Lighting s UK manufacturing facility These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Snap on Lens Plug Connection & Remote Driver LED Grid Ordering Code Dimensions (mm) IP44 IP44 Emergency IP65 IP65 Emergency W W1 D CO LED 36W 4000K lm LRG 1144 E3-LRG 1144 LRG 1145 E3-LRG LED 45W 4000K lm LRG 1244 E3-LRG 1244 LRG 1245 E3-LRG LED 74W 4000K lm LRG 1344 E3-LRG 1344 LRG 1345 E3-LRG

4 Bia T5 Fluorescent Modular Luminaires

5 Bia T5 Fluorescent Modular Luminaires Features: Twin, triple or quad T5 high efficiency (HE) or high output (HO) linear fluorescent light sources High frequency (HF) control gear Level opening lens (no tools required) - retained via suspension straps Recessed ceiling mounting - only shallow 75mm void depth required Ceiling mounting - suitable for narrow / wide (15 / 25mm) T grid ceiling system Side brackets included for plasterboard ceilings Options: IP54 (dust proof & water splash proof) IP65 (dust tight & water jet proof) Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Polished aluminium parabolic louvre Polycarbonate opal lens (PMMA available on request) Polycarbonate prismatic lens (PMMA available on request) White rigid aluminium frame - will not flex Anodised rigid aluminium frame - will not flex Material: Body: steel Finish: L1 L3 Body: white Spares L2 L All components are available from Lamps and Lighting s UK manufacturing facility. Parabolic Louvre Opal Lens 75 0 C0 / C180 C90 / C270 cd / 1000 lm Bia T5 4 x 549mm 24W T5 HO (G5) These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Bia T5 Parabolic Louvre Ordering Code Prismatic Lens Opal Lens L1 Dimensions L2 L3 L4 2 x 1149mm 28W T5 HE (G5) FRBL 228 FRBP 228 FRBO x 1449mm 35W T5 HE (G5) FRBL 235 FRBP 235 FRBO x 1149mm 54W T5 HO (G5) FRBL 254 FRBP 254 FRBO x 1449mm 49W T5 HO (G5) FRBL 249 FRBP 249 FRBO x 549mm 14W T5 HE (G5) FRBL 314 FRBP 314 FRBO x 1149mm 28W T5 HE (G5) FRBL x 1449mm 35W T5 HE (G5) FRBL x 549mm 24W T5 HO (G5) FRBL 324 FRBP 324 FRBO x 1149mm 54W T5 HO (G5) FRBL x 1449mm 49W T5 HO (G5) FRBL x 549mm 14W T5 HE (G5) FRBL 414 FRBP 414 FRBO x 549mm 24W T5 HO (G5) FRBL 424 FRBP 424 FRBO

6 Lynx Surface Ceiling Luminaires

7 Lynx LED Surface Ceiling Luminaires Features: IP44 (resists dirt ingress & splash proof) Energy efficient Osram LEDs Low LED power consumption: 16W Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output superior illuminance to a 28W TC-DD compact fluorescent Average 50,000 hrs LED life - maintenance free Wall or ceiling mounting Besa box provision Removable gear tray Bayonet twist on / off trim for ease of maintenance Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency LED available in two colour temperatures: K (warm) available on request K (cool) Material: Body: polycarbonate Lens: polycarbonate 150 Finish: Body: white or chrome Lens: opal Spares Lynx LED C0 / C C90 / C270 cd / 1000 lm Lynx LED 16W All components are available from Lamps and Lighting s UK manufacturing facility. 44 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Lynx LED Ordering Code MIC Compatibility White Trim Equivalent CFL Type Standard Emergency MIC 1 MIC 2 MIC 3 16W LED 3000K (warm) 1 x 28W LUL 103/WH E3-LUL 103/WH 16W LED 4000K (cool) 1 x 28W LUL 104/WH E3-LUL 104/WH Chrome Trim 16W LED 3000K (warm) 1 x 28W LUL 103/CH E3-LUL 103/CH 16W LED 4000K (cool) 1 x 28W LUL 104/CH E3-LUL 104/CH

8 Lynx CFL Surface Ceiling Luminaires Features: IP44 (resists dirt ingress & splash proof) Low energy compact fluorescent light source High frequency (HF) control gear Wall or ceiling mounting Besa box provision Removable gear tray Bayonet twist on / off trim for ease of maintenance Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency Material: Body: polycarbonate Lens: polycarbonate Finish: Body: white or chrome Lens: opal Spares All components are available from Lamps and Lighting s UK manufacturing facility. 44 Photometrics available on request These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) C0 / C180 C90 / C270 Lynx CFL Ordering Code MIC Compatibility Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 White 1 x 28W TC-DD (GR10q) SUL 3/28WH E3-SUL 3/28WH û 1 x 38W TC-DD (GR10q) SUL 3/38WH û Chrome 1 x 28W TC-DD (GR10q) SUL 3/28CH E3-SUL 3/28CH û 1 x 38W TC-DD (GR10q) SUL 3/38CH û

9 Orbit Surface Ceiling Luminaires

10 Orbit LED Surface Ceiling Luminaires Features: Energy efficient Osram LEDs Choice of three LED light outputs Corrosion resistant Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a compact fluorescent Average 50,000 hrs LED life - maintenance free Wall or ceiling mounting Besa box provision Removable gear tray 20mm side knockouts for through wiring Options: Orbit LED White Cloud Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency LED available in two colour temperatures: K (warm) available on request K (cool) Choice of snap-on halo trims Semi-recessing kit (not compatible with halo trim) Material: Orbit LED White Prismatic Orbit LED Chrome with Cloud 150 Body: polycarbonate Lens: polycarbonate Finish: Body: white or chrome Halo trim: white, chrome, satin silver or polished brass (on request) Lens: cloud or prismatic 50 Orbit LED 110 Semi Recessed Option (not available with halo trim) C0 / C C90 / C270 cd / 1000 lm Orbit LED 16W Spares All components are available from Lamps and Lighting s UK manufacturing facility. These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Meridian Care Home, Tameside Orbit LED

11 Orbit Trims Surface Ceiling Luminaires The Orbit LED range of luminaires is available with a choice of decorative, contemporary snap on halo trims to suit a wide range of prestigious environments. Orbit with Optional Satin Silver Decor Trim Orbit with Optional White Halo Trim Orbit with Optional Satin Silver Halo Trim Orbit with Optional Chrome Halo Trim Orbit with Decor Trim Orbit with Halo Trim Orbit LED Ordering Code MIC Compatibility Cloud Lens Prismatic Lens MIC 1 MIC 2 MIC 3 White Trim Equivalent CFL Type Standard Emergency Standard Emergency 16W LED 3000K (warm) 1 x 28W LUOC 103/WH E3-LUOC 103/WH LUOP 103/WH E3-LUOP 103/WH 16W LED 4000K (cool) 1 x 28W LUOC 104/WH E3-LUOC 104/WH LUOP 104/WH E3-LUOP 104/WH 23W LED 4000K (cool) 1 x 38W 2 x 18W LUOC 204/WH E3-LUOC 204/WH LUOP 204/WH E3-LUOP 204/WH 34W LED 4000K (cool) 1 x 55W 2 x 26W LUOC 404/WH E3-LUOC 404/WH LUOP 404/WH E3-LUOP 404/WH Chrome Trim 16W LED 3000K (warm) 1 x 28W LUOC 103/CH E3-LUOC 103/CH LUOP 103/CH E3-LUOP 103/CH 16W LED 4000K (cool) 1 x 28W LUOC 104/CH E3 LUOC 104/CH LUOP 104/CH E3-LUOP 104/CH 23W LED 4000K (cool) 1 x 38W 2 x 18W LUOC 204/CH E3-LUOC 204/CH LUOP 204/CH E3-LUOP 204/CH 34W LED 4000K (cool) 1 x 55W 2 x 26W LUOC 404/CH E3 LUOC 404/CH LUOP 404/CH E3-LUOP 404/CH Accessories Halo Trim Decor Trim White halo trim SCOHT 4/WH White halo trim SCODT 4/WH Semi-recessing kit SCO SRK Chrome halo trim SCOHT 4/CH Chrome halo trim SCODT 4/CH Satin silver halo trim SCOHT 4/SS Satin silver halo trim SCODT 4/SS Polished brass halo trim SCOHT 4/PB Polished brass halo trim SCODT 4/PB

12 Orbit CFL Surface Ceiling Luminaires Features: Low energy compact fluorescent light source High frequency (HF) control gear Corrosion resistant Wall or ceiling mounting Besa box provision Removable gear tray 20mm side knockouts for through wiring Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Choice of snap-on halo trims Semi-recessing kit (not compatible with halo trim) Orbit CFL White Cloud Material: Body: polycarbonate Lens: polycarbonate Orbit CFL White Prismatic Orbit CFL Chrome with Cloud Finish: Body: white or chrome Halo trim: white, chrome, satin silver or polished brass (on request) Lens: cloud or prismatic Spares All components are available from Lamps and Lighting s UK manufacturing facility. 50 Orbit CFL 110 Semi Recessed Option (not available with halo trim) C0 / C180 C90 / C270 cd / 1000 lm Orbit Prismatic 1 x 38W TC-DD (GR10q) These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Orbit CFL Ordering Code MIC Compatibility Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 White 1 x 28W TC-DD (GR10q) SCO 428/WH E3-SCO 428/WH û 1 x 38W TC-DD (GR10q) SCO 438/WH E3-SCO 438/WH û 2 x 18W TC-L (2G11) SCO 218/WH E3-SCO 218/WH Chrome 1 x 28W TC-DD (GR10q) SCO 428/CH E3-SCO 428/CH û 1 x 38W TC-DD (GR10q) SCO 438/CH E3-SCO 438/CH û 2 x 18W TC-L (2G11) SCO 218/CH E3-SCO 218/CH

13 Rondo Surface Ceiling Luminaires

14 Rondo LED Surface Ceiling Luminaires Features: IP44 (resists dirt ingress & splash proof) Energy efficient Osram LEDs Choice of three LED light outputs Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a compact fluorescent Average 50,000 hrs LED life - maintenance free Wall or ceiling mounting Removable gear tray 2 x 20mm conduit entry for side wiring Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency LED available in two colour temperatures: K (warm) available on request K (cool) Semi-recessing kit Material: Rondo LED with White Body Rondo LED with Chrome Body Body: polycarbonate Lens: polycarbonate 150 Finish: Body: white or chrome Lens: opal Spares 380 Semi Recessed Option C0 / C C90 / C270 cd / 1000 lm Rondo LED 16W All components are available from Lamps and Lighting s UK manufacturing facility. 44 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Rondo LED White Equivalent CFL Type Standard Ordering Code E3-Emergency MIC Compatibility MIC 1 MIC 2 MIC 3 16W LED 3000K (warm) 1 x 28W LUR 103/WH E3-LUR 103/WH 16W LED 4000K (cool) 1 x 28W LUR 104/WH E3-LUR 104/WH 23W LED 4000K (cool) 1 x 38W 2 x 18W LUR 204/WH E3-LUR 204/WH 34W LED 4000K (cool) 1 x 55W 2 x 26W LUR 404/WH E3-LUR 404/WH Chrome 16W LED 3000K (warm) 1 x 28W LUR 103/CH E3-LUR 103/CH 16W LED 4000K (cool) 1 x 28W LUR 104/CH E3-LUR 104/CH 23W LED 4000K (cool) 1 x 38W 2 x 18W LUR 204/CH E3-LUR 204/CH 34W LED 4000K (cool) 1 x 55W 2 x 26W LUR 404/CH E3-LUR 404/CH Accessories Semi-recessing kit SCR SRK

15 Rondo CFL Surface Ceiling Luminaires Features: IP44 (resists dirt ingress & splash proof) Low energy compact fluorescent light source High frequency (HF) control gear Wall or ceiling mounting Removable gear tray 2 x 20mm conduit entry for side wiring Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Semi-recessing kit Rondo CFL with White Body Material: Body: polycarbonate Lens: polycarbonate Finish: Rondo CFL with Chrome Body Body: white or chrome Lens: opal Spares All components are available from Lamps and Lighting s UK manufacturing facility Semi Recessed Option C0 / C180 C90 / C270 cd / 1000 lm Rondo 1 x 28W TC-DD (GR10q) These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Rondo CFL Ordering Code MIC Compatibility Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 White 1 x 28W TC-DD (GR10q) SUR 4/28WH E3-SUR 4/28WH û 1 x 38W TC-DD (GR10q) SUR 4/38WH E3-SUR 4/38WH û 1 x 55W T16-R (2GX13) SUR 4/55WH û û 2 x 18W TC-L (2G11) SUR 4/18WH E3-SUR 4/18WH Chrome 1 x 28W TC-DD (GR10q) SUR 4/28CH E3-SUR 4/28CH û 1 x 38W TC-DD (GR10q) SUR 4/38CH E3-SUR 4/38CH û 1 x 55W T16-R (2GX13) SUR 4/55CH û û 2 x 18W TC-L (2G11) SUR 4/18CH E3-SUR 4/18CH Accessories Semi-recessing kit SCR SRK

16 Optico LED Surface Ceiling Luminaires

17 Optico LED Surface Ceiling Luminaires Features: IP66 (dust tight & strong water jet proof) IK10 (10 joule) shock resistance Corrosion resistant Vandal resistant Energy efficient Osram LEDs Low LED power consumption: 16W Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output superior illuminance to a 28W TC-DD compact fluorescent Average 50,000 hrs LED life - maintenance free Flush wall or ceiling mounting Anti-ligature / lever resistant Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency LED available in two colour temperatures: K (warm) available on request K (cool) Tamper resistant torx screw suffix part code / T Material: Body: polycarbonate Lens: polycarbonate Finish: 425 Body: white Lens: opal Tamper resistant screw Anti-ligature / lever resistant 143 Spares All components are available from Lamps and Lighting s UK manufacturing facility. 66 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Optico LED Ordering Code MIC Compatibility Equivalent CFL Type Standard Emergency MIC 1 MIC 2 MIC 3 16W LED 3000K (warm) 1 x 28W LUN 103/WH E3-LUN 103/WH 16W LED 4000K (cool) 1 x 28W LUN 104/WH E3-LUN 104/WH

18 Optico CFL Surface Ceiling Luminaires

19 Optico CFL Surface Ceiling Luminaires Features: IP66 (dust tight & strong water jet proof) IK10 (10 joule) shock resistance Corrosion resistant Vandal resistant Low energy compact fluorescent light source High frequency (HF) control gear Flush wall or ceiling mounting Anti-ligature / lever resistant Options: Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Tamper resistant torx screws suffix part code / T Material: Body: polycarbonate Lens: polycarbonate Finish: Body: white Lens: opal Spares All components are available from Lamps and Lighting s UK manufacturing facility These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Tamper resistant screw Anti-ligature / lever resistant Midi 113 Maxi 143 Optico CFL Ordering Code MIC Compatibility Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 1 x 28W TC-DD (GR10q) SUN 2/28HF E3-SUN 2/28HF 1 x 38W TC-DD (GR10q) SUN 2/38HF E3-SUN 2/38HF Maxi 1 x 28W TC-DD (GR10q) SUN 3/28HF E3-SUN 3/28HF 1 x 38W TC-DD (GR10q) SUN 3/38HF E3-SUN 3/38HF 2 x 26W TC-DE (G24q3) SUN 3/226HF E3-SUN 3/226HF

20 Venus LED LED Downlighters

21 Venus Midi LED LED Downlighters Features: IP43 Choice of four LED outputs CRI (colour rendering index) of LED 80 Average 50,000 hrs LED life maintenance free Environmentally friendly LED module contains no mercury No ultraviolet (UV) or infrared (IR) rays - no discolouration of displays Lamellar heat sink and high speed oscillating diaphragm for advanced thermal management with no fan Lambertian diffuser allows uniform 80º light distribution in all directions giving a better luminous efficiency Easy to install via rapid spring system Recessed mounting in false ceilings ranging from 1mm to 30mm thick Options: DALI dimmable version available on request (available for 22W & 34W only) Material: Bezel: die-cast aluminium Heat sink: aluminium Finish: Bezel: metallic grey or white Spares All components are available from Lamps and Lighting s UK manufacturing facility Photometrics available on request C0 / C180 C90 / C270 Venus Midi LED Ordering Code White Metallic Grey 1 X 12W LED 3000K (warm) 1 X 22W LED 3000K (warm) 1 X 32W LED 4000K (cool) 1 X 34W LED 3000K (warm) IDRE 112/WH IDRE 122/WH IDRE 132/WH IDRE 134/WH IDRE 112/MGY IDRE 122/MGY IDRE 132/MGY IDRE 134/MGY

22 Venus Maxi LED LED Downlighters Features: IP43 Choice of four LED outputs CRI (colour rendering index) of LED 80 Average 50,000 hrs LED life maintenance free Environmentally friendly LED module contains no mercury No ultraviolet (UV) or infrared (IR) rays - no discolouration of displays Lamellar heat sink and high speed oscillating diaphragm for advanced thermal management with no fan Lambertian diffuser allows uniform 80º light distribution in all directions giving a better luminous efficiency Easy to install via rapid spring system Recessed mounting in false ceilings ranging from 1mm to 30mm thick Options: DALI dimmable version available on request (available for 22W & 34W only) Material: Bezel: die-cast aluminium Heat sink: aluminium Finish: Bezel: metallic grey or white Spares All components are available from Lamps and Lighting s UK manufacturing facility C0 / C180 C90 / C270 cd / 1000 lm Venus Maxi LED 1 x 12W Fortimo Downlight LED Venus Maxi LED Ordering Code White Metallic Grey 1 X 12W LED 3000K (warm) 1 X 22W LED 3000K (warm) 1 X 32W LED 4000K (cool) 1 X 34W LED 3000K (warm) IDRE 212/WH IDRE 222/WH IDRE 232/WH IDRE 234/WH IDRE 212/MGY IDRE 222/MGY IDRE 232/MGY IDRE 234/MGY

23 Venus LED LED Downlighters What is Fortimo? Fortimo is a LED module, developed by Philips, with remote phosphor technology. An absolute evolution in the world of LEDs that enables an important leap forward for energy efficiency, colour rendering quality and light output. Benefits The Fortimo LED DLM module ensures the end user almost zero maintenance costs thanks to its long life (50,000 hours, equal to 10/12 years). It is sturdy and robust, providing long term reliability. It turns on immediately, without frequency limits over time. The low level of heat makes it possible to control and reduce the load on conditioning and, accordingly, the design of the cooling systems. With no harmful ultraviolet (UV) and infrared (IR) rays, the quality and freshness of produce can be demonstrated with close-up lighting. The module is environmentally friendly and does not contain mercury. Performance This table shows a comparison between the Philips Fortimo LED and standards fluorescent. The values are based on the lamps being used to obtain a level of 300 lux in an average size room. Technology Venus Midi/Maxi utilises the remote phosphor technology of Philips Fortimo LED combined with a Lambertian diffuser to obtain light distribution with equal intensity in all directions, which results in high luminous efficiency. The Fortimo module is composed of emitters that generate blue light radiation, placed inside a diffusion chamber. A yellow phosphor diffusion screen transforms the light upon closing from blue to white. Heat Loss In conventional lamps, thermal energy is lost almost entirely via radiation. The LEDs dissipate excess energy via conduction. The precise contact between the aluminium exterior shell and the specially designed lamellar heat sink, ensures that the Fortimo LED module runs at its optimal capacity giving it a long life functionality and luminous efficiency. Active Cooling Efficiency (%) Venus Midi / Maxi 1100lm 2000lm lm 93 Recessed Fluorescent 1 x 26W 1 x 18W 2 x 26W To ensure optimal functionality and durability of the LED light source, it is very important that the heat generated is dispersed by means of a suitable cooling device. On the Venus Midi/Maxi (2000 and 3000 lumen versions), an advanced cooling technology device has been applied. This new, more durable and reliable system utilises a high speed oscillating diaphragm that generates air pulses which force cool air towards the heat sink fins. This enables optimal dissipation of the heat generated by the Fortimo LED module in total silence. Efficiency (lm) Colour Rendering Lamp power (W) Ratio flux-power (lm/w) Number of fittings Energy consumption (Kwh) CO2 emision (405gr x Kwh) , , , The colour of an object depends on the light source lighting it. The colour rendering index (CRI) of a light source represents the effect that the light source has on the appearance of an object s colour. The CRI is expressed as a rating from 0 to 100, where 100 represents the colour rendering of a source where the light does not change the perception of colours. Venus Midi/Maxi have a CRI colour rendering index > 80 and a colour temperature of 3000K or 4000K, thus maintaining a lively and brilliant colour for the entire life of the fixture.

24 Caparo T5 Linear Fluorescent Luminaires

25 Caparo 2 x 35W Caparo T5 Linear Fluorescent Luminaires Features: Twin T5 high efficiency (HE) or high output (HO) linear fluorescent light sources High frequency (HF) control gear Direct light distribution Ceiling mounting Besa box mounting Robust polycarbonate lens Tamper resistant screw on end caps Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Available with a high output reflector: Caparo Elite T5 Material: Body: steel End caps: polycarbonate Lens: polycarbonate Finish: Body: white End caps: white Lens: opal Spares L FC W All components are available from Lamps and Lighting s UK manufacturing facility. Caparo LFL Elite D C0 / C C90 / C270 cd / 1000 lm These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Caparo T5 Ordering Code MIC Compatibility Dimensions Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 L W D FC High Efficiency 2 x 28W T5 (G5) HE FSH 228 E3-FSH x 35W T5 (G5) HE FSH 235 E3-FSH High Ouput 2 x 54W T5 (G5) HO FSH 254 E3-FSH x 49W T5 (G5) HO FSH 249 E3-FSH

26 Caparo T5 Elite Linear Fluorescent Luminaires

27 Caparo Elite 2 x 35W Caparo Elite T5 Linear Fluorescent Luminaires Features: Twin T5 high efficiency (HE) or high output (HO) linear fluorescent light sources High frequency (HF) control gear Super efficient elite reflector offering 95.5% reflectance Direct light distribution Ceiling mounting Besa box mounting Robust polycarbonate lens Tamper resistant screw on end caps Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Available without a high output reflector: Caparo T5 Material: Body: steel End caps: polycarbonate Lens: polycarbonate Finish: L FC Body: white End caps: white Lens: opal W Spares Caparo T5 D C0 / C C90 / C270 cd / 1000 lm All components are available from Lamps and Lighting s UK manufacturing facility. These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Caparo Elite T5 Ordering Code MIC Compatibility Dimensions Lamp Type (not supplied) Standard Emergency MIC 1 MIC 2 MIC 3 L W D FC High Efficiency 2 x 28W T5 (G5) HE FSHS 228 E3-FSHS x 35W T5 (G5) HE FSHS 235 E3-FSHS High Ouput 2 x 54W T5 (G5) HO FSHS 254 E3-FSHS x 49W T5 (G5) HO FSHS 249 E3-FSHS

28 Caparo LED Linear LED Luminaires

29 Caparo LED Linear LED Luminaires Features: Energy efficient Osram LEDs Choice of three LED light outputs Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a linear fluorescent Average 50,000 hrs LED life - maintenance free Ceiling mounting Besa box provision Tamper resistant screw on end caps Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency Material: Body: steel Lens: polycarbonate End caps: polycarbonate Finish: Body: white Lens: cloud End caps: white L FC Spares All components are available from Lamps and Lighting s UK manufacturing facility. W D Photometrics available on request C0 / C180 C90 / C270 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Caparo LED Ordering Code MIC Compatibility Dimensions (mm) High Efficiency Standard Emergency MIC 1 MIC 2 MIC 3 L W D FC 2 x LED 17W 4000K (cool) lm LSH 2414 E3-LSH x LED 24W 4000K (cool) lm LSH 2514 E3-LSH High Ouput 2 x LED 25W 4000K (cool) lm LSH 2424 E3-LSH

30 Prism Pack LED Linear LED Luminaires

31 Prism Pack LED Linear LED Luminaires Features: Energy efficient Osram LEDs Choice of three LED light outputs Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a linear fluorescent Average 50,000 hrs LED life - maintenance free Ceiling mounting Flame retardant prismatic lens Removable key hole gear tray for ease of maintenance Steel screw-on end caps Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency Material: Body: steel Lens: polycarbonate Finish: Body: white Lens: prismatic or cloud (on request) Spares All components are available from Lamps and Lighting s UK manufacturing facility. L FC W D Photometrics available on request C0 / C180 C90 / C270 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Prism Pack LED Ordering Code MIC Compatibility Dimensions (mm) High Efficiency Standard Emergency MIC 1 MIC 2 MIC 3 L W D FC 2 x LED 17W 4000K (cool) lm LSPP 2414 E3-LSPP x LED 24W 4000K (cool) lm LSPP 2514 E3-LSPP High Ouput 2 x LED 25W 4000K (cool) lm LSPP 2424 E3-LSPP

32 Prism Pack T5 Linear Fluorescent Luminaires

33 Prism Pack T5 Linear Fluorescent Luminaires Features: Single or twin T5 high efficiency (HE) or high output (HO) linear fluorescent light sources High frequency (HF) control gear Ceiling mounting Flame retardant prismatic lens Removable key hole gear tray for ease of maintenance Steel screw-on end caps Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency High frequency dimming versions available / DA 1 10V (analogue) / DD DALI (digital) Material: Body: steel Lens: polycarbonate Finish: Body: white Lens: prismatic or cloud (on request) 150 Spares L All components are available from Lamps and Lighting s UK manufacturing facility. FC W D C0 / C180 C90 / C270 cd / 1000 lm Prism Pack T5 2 x 54W HO (G5) These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Prism Pack T5 Ordering Code MIC Compatibility Dimensions (mm) Single Standard Emergency MIC 1 MIC 2 MIC 3 L W D FC High Efficiency 1 x 28W T5 (G5) HE FSPP 128 E3-FSPP x 35W T5 (G5) HE FSPP 135 E3-FSPP High Output 1 x 54W T5 (G5) HO FSPP 154 E3-FSPP x 49W T5 (G5) HO FSPP 149 E3-FSPP Twin High Efficiency 2 x 28W T5 (G5) HE FSPP 228 E3-FSPP x 35W T5 (G5) HE FSPP 235 E3-FSPP High Output 2 x 54W T5 (G5) HO FSPP 254 E3-FSPP x 49W T5 (G5) HO FSPP 249 E3-FSPP

34 Gladiator Cornice LED Industrial LED Luminaires

35 Gladiator Cornice LED Industrial LED Luminaires Features: IP65 (dust tight & water jet proof) IK10 (10 joule) shock resistance Corrosion resistant Energy efficient Osram LEDs Choice of four LED light outputs Average 50,000 hrs LED life - maintenance free Optimum single bin LEDs with a 3 MacAdam ellipse tolerance Cornice mounting Vandal and weather resistant Flame retardant, high impact moulded lens Tamper resistant captive stainless steel screws Provision for conduit entry at the ends Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency Single or twin version available Material: Body: steel Frame: aluminium extrusion Lens: polycarbonate Finish: L Body: textured white, black or metallic grey (special colours available on request) Lens: prismatic Spares W D Photometrics available on request C0 / C180 C90 / C270 All components are available from Lamps and Lighting s UK manufacturing facility. These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Gladiator LED Cornice Ordering Code MIC Compatibility Dimensions (mm) Single Standard Emergency MIC 1 MIC 2 MIC 3 L D FC 1 x LED 17W K HE LSGC 1114 E3-LSGC x LED 24W K HE LSGC 1144 E3-LSGC x LED 25W K HO LSGC 1124 E3-LSGC x LED 36W K HO LSGC 1134 E3-LSGC Twin 2 x LED 17W K HE LSGC 2214 E3-LSGC x LED 24W K HE LSGC 2244 E3-LSGC x LED 25W K HO LSGC 2224 E3-LSGC x LED 36W K HO LSGC 2234 E3-LSGC The information given on these sheets is typical of the product depicted; it must not be interpreted as a guarantee of individual product performance and / or characteristics. We reserve the right to alter specifications and designs without prior notice. All measurements are in millimetres (mm).

36 Alley Pack Exterior Amenity Luminaires

37 Alley Pack LED Exterior Amenity Luminaires Features: IP65 (dust tight & water jet proof) IK10 (10 joule) shock resistance Corrosion resistant Energy efficient Osram LEDs Choice of three LED light outputs Average 50,000 hrs LED life - maintenance free Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output over 3 wattages superior performance to a compact fluorescent Visor for control of light polution Wall mounting Besa box provision Removable gear tray Slim body profile Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency LED available in two colour temperatures: K (warm) available on request K (cool) Tamper resistant torx screw suffix part code / T Integral photocell suffix part code / P Material: Body: polycarbonate Lens: polycarbonate Photometrics available on request Finish: Alley Pack LED Cloud C0 / C180 C90 / C270 Body: black Lens: prismatic or cloud Spares All components are available from Lamps and Lighting s UK manufacturing facility. Alley Pack LED Ordering Code MIC Compatibility These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Prismatic Lens 16W LED 3000K (warm) Equivalent CFL Type 1 x 28W Standard LAAP 103 Emergency E3-LAAP 103 MIC 1 MIC 2 MIC 3 16W LED 4000K (cool) 1 x 28W LAAP 104 E3-LAAP W LED 4000K (cool) 1 x 38W 2 x 18W LAAP 204 E3-LAAP W LED 4000K (cool) 1 x 55W 2 x 26W LAAP 404 E3-LAAP 404 Cloud Lens 16W LED 3000K (warm) 1 x 28W LAAC 103 E3-LAAC W LED 4000K (cool) 1 x 28W LAAC 104 E3-LAAC W LED 4000K (cool) 1 x 38W 2 x 18W LAAC 204 E3-LAAC W LED 4000K (cool) 1 x 55W 2 x 26W LAAC 404 E3-LAAC 404

38 Alley Pack CFL Exterior Amenity Luminaires Features: IP65 (dust tight & water jet proof) IK10 (10 joule) shock resistance Corrosion resistant Low energy compact fluorescent light source High frequency (HF) control gear Visor for control of light polution Wall mounting Besa box provision Removable gear tray Slim body profile Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency Tamper resistant torx screw suffix part code / T Integral photocell suffix part code / P Material: Body: polycarbonate Lens: polycarbonate Finish: Body: black Lens: prismatic or cloud Spares All components are available from Lamps and Lighting s UK manufacturing facility Photometrics available on request Alley Pack CFL Prismatic C0 / C180 C90 / C270 These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Alley Pack CFL Ordering Code MIC Compatibility Lamp Type (not supplied) White MIC 1 MIC 2 MIC 3 Prismatic 1 x 28W TC-DD (GR10q) SAAP 28 û 1 x 38W TC-DD (GR10q) SAAP 38 û Cloud 1 x 28W TC-DD (GR10q) SAAC 28 û 1 x 38W TC-DD (GR10q) SAAC 38 û

39 Mistral Exterior Amenity Luminaires

40 Mistral LED Exterior Amenity Luminaires Features: IP65 (dust tight & water jet proof) Corrosion resistant Energy efficient Osram LEDs Choice of 3 LED outputs Average 50,000 hrs LED life - maintenance free Optimum single bin LEDs with a 3 MacAdam ellipse tolerance High lumen output superior illuminance to a to a conventional compact fluorescent (CFL) Wall or ceiling mounting Contemporary design Options: Suffix part code in order: Available with an integrated Manual Intelligent Control (MIC): / MIC1 MIC 1 / MIC2 MIC2 / MIC3 MIC 3 Integral 3hr maintained emergency 3 versions of trims available: smart, visa & grill Visa version for control of light pollution Tamper resistant torx screw suffix part code / T Choice of body finishes Mistral Smart LED Material: Body: die-cast aluminium Lens: polycarbonate Finish: Trim: black or metallic grey Lens: opal Spares All components are available from Lamps and Lighting s UK manufacturing facility. Mistral Visa LED These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Mistral Grill LED

41 Mistral LED Exterior Amenity Luminaires Mistral Smart LED MGY Mistral Visa LED MGY Mistral Grill LED MGY Mistral Smart LED Mistral Visa LED Mistral Grill LED Photometrics available on request Mistral LED C0 / C180 C90 / C270 Mistral LED Ordering Code MIC Compatibility Mistral Smart 16W LED 4000K (cool) 23W LED 4000K (cool) 34W LED 4000K (cool) Equivalent CFL Type 1 x 28W 1 x 38W 2 x 18W 1 x 55W 2 x 26W Black Base LAMS 104/B LAMS 204/B LAMS 304/B Emergency Black base E3-LAMS 104/B E3-LAMS 204/B E3-LAMS 304/B Metallic Grey Base LAMS 104/MGY LAMS 204/MGY LAMS 304/MGY Emergency Metallic Grey Base E3-LAMS 104/MGY E3-LAMS 204/MGY E3-LAMS 304/MGY MIC 1 MIC 2 MIC 3 Mistral Visa 16W LED 4000K (cool) 23W LED 4000K (cool) 34W LED 4000K (cool) 1 x 28W 1 x 38W 1 x 55W 2 x 18W 2 x 26W LAMV 104/B LAMV 204/B LAMV 304/B E3-LAMV 104/B E3-LAMV 204/B E3-LAMV 304/B LAMV 104/MGY LAMV 204/MGY LAMV 304/MGY E3-LAMV 104/MGY E3-LAMV 204/MGY E3-LAMV 304/MGY Mistral Grill 16W LED 4000K (cool) 23W LED 4000K (cool) 34W LED 4000K (cool) 1 x 28W 1 x 38W 1 x 55W 2 x 18W 2 x 26W LAMG 104/B LAMG 204/B LAMG 304/B E3-LAMG 104/B E3-LAMG 204/B E3-LAMG 304/B LAMG 104/MGY LAMG 204/MGY LAMG 304/MGY E3-LAMG 104/MGY E3-LAMG 204/MGY E3-LAMG 304/MGY

42 Mistral CFL Exterior Amenity Luminaires Features: IP65 (dust tight & water jet proof) Corrosion resistant Low energy compact fluorescent light source High frequency (HF) control gear Wall or ceiling mounting Contemporary design Options: Integral 3hr maintained emergency Dimmable versions available on request 3 versions of trims available: smart, visa & grill Visa version for control of light pollution Tamper resistant torx screw suffix part code / T Choice of body finishes Material: Body: die-cast aluminium Lens: polycarbonate Mistral Smart CFL Finish: Trim: black or metallic grey Lens: opal Spares All components are available from Lamps and Lighting s UK manufacturing facility. These luminaires are designed to comply with EN (BS 4533:101) Emergency EN (BS 4533:102.22) Mistral Visa CFL Mistral Grill CFL

43 Mistral CFL Exterior Amenity Luminaires Mistral Smart CFL MGY Mistral Visa CFL MGY Mistral Grill CFL MGY Mistral Smart CFL Mistral Visa CFL Mistral Grill CFL Mistral CFL 0 C0 / C180 C90 / C270 cd / 1000 lm Mistral Smart 1 x 38w TC-DD (GR10q) Mistral CFL Ordering Code Lamp Type (not supplied) Mistral Smart Black Base Emergency Black base Metallic Grey Base Emergency Metallic Grey Base 1 x 28w TC-DD (GR10q) OTMS 328/B E3-OTMS 328/B OTMS 328/MGY E3-OTMS 328/MGY 1 x 38w TC-DD (GR10q) OTMS 338/B E3-OTMS 338/B OTMS 338/MGY E3-OTMS 338/MGY Mistral Grill 1 x 28w TC-DD (GR10q) OTMG 328/B E3-OTMG 328/B OTMG 328/MGY E3-OTMG 328/MGY 1 x 38w TC-DD (GR10q) OTMG 338/B E3-OTMG 338/B OTMG 338/MGY E3-OTMG 338/MGY Mistral Visa 1 x 28w TC-DD (GR10q) OTMV 328/B E3-OTMV 328/B OTMV 328/MGY E3-OTMV 328/MGY 1 x 38w TC-DD (GR10q) OTMV 338/B E3-OTMV 338/B OTMV 338/MGY E3-OTMV 338/MGY

44 MIC Manual Intelligent Control The Manual Intelligent Control (MIC) system features a range of advanced sensor technology controls offering the ultimate in energy saving and carbon reduction. Significant energy savings can be achieved with a MIC system that dynamically manages lamp power according to the instantaneous lighting requirement. It ensures that the right level of light appears at the right place only when required, this preventing unnecessary energy consumption and potentially reducing maintenance costs. The MIC system has been installed in over 3000 BT telephone exchanges with confirmed energy savings in excess of 70%. There are three types of Manual Intelligent Control: MIC1, MIC2 and MIC3, available as a master (sensor incorporated) or a slave (controlled by master), to suit different requirements and budgets. The manual intelligent controls are programmed manually by a dip switch to switch on and off automatically to maximise cost savings. MIC 1 MIC 1 is a versatile and cost-effective OFF ON OFF energy saving control unit. Suffix Luminaire Ordering Code Master /MIC1 Slave OFF Absence luminaires are switched off. ON Occupancy detected luminaires illuminate at full output unless there is sufficient daylight and the lux level setting overides it. OFF Absence after a preset time, luminaires switch off completely. /MIC1S Example Alley Pack LED 4000K with intergrated MIC1 master system: LAAP 104/MIC1 MIC 2 MIC 2 offers all the benefits of the MIC 1 but with a DIM ON DIM function. MIC 2 is an ideal control for reducing energy consumptions whilst still providing some level of illumination for extra safety. Suffix Luminaire Ordering Code Master /MIC2 Slave DIM Absence luminaires are on at a courtesy preset dimmed level. Approximately 20% output and 1/3 total power. ON Occupancy detected luminaires illuminate at full output. DIM Absence after a preset time of absence, luminaires return to the courtesy preset dimmed level. /MIC2S Example Alley Pack LED 3000K with intergrated MIC2 slave system: LAAP 103/MIC2S MIC 3 MIC 3 is the most flexible energy saving manual control with an OFF ON DIM OFF function, permitting full light management and maximum energy saving. Suffix Luminaire Ordering Code Master /MIC3 OFF ON DIM OFF Absence luminaires are switched off. Occupancy detected luminaires illuminate at full output. After a preset time of absence, luminaires dim to the courtesy preset dimmed level. Approximately 20% output and 1/3 total power After continued absence over a preset time, luminaires switch off completely. If required, the off function can be disabled to operate as a MIC 2 Slave /MIC3S Example Alley Pack LED 4000K with emergency version and integrated MIC3 master system: E3-LAAP 104/MIC3

45 MIC Manual Intelligent Control MIC Operating Functions and Features MIC 1 MIC 2 MIC 3 Operating function DIP Switch DIP Switch DIP Switch Lux level adjustment lux N/A N/A Time adjustment to courtesy preset dimmed level N/A 5 30 mins 5 30 mins Time adjustment to switch off completely 5 30 mins N/A mins Sensitivity (range) adjustment 2 10 metres 2 10 metres 1 6 metres Dimming level (ilite ballast/driver) N/A 10/25/50% 10/25/50% Detection angle Sensor maximum load (inductive) 600W 600W 600W Detection Area 0 MIC 1 & 2 MIC Mounting Height (metres) Mounting Height (metres) Detection area (metres) Setting 1 =2metres Setting 2 = 5 metres Setting 3 =10metres Detection area (metres) Setting 1 = 1 metre S etting 2 = 3 metres Sett ing 3 = 6metres Typical Installation Options Option One Master Master Master Master The masters are all working independently for maximum energy efficiency to create a cascade effect. This is ideal for a retrofit installation. Option Two Master Slave Master Slave The master is working in conjunction with a slave to illuminate a specific zone. The master will control the slaves. Option Three Master Slave Master Slave The masters and the slaves are working in conjunction to illuminate a larger area. Option Four Master Master Master Master The masters are working together for maximum energy efficiency and sensitivity in a zoned area. Option Five Master Master Master Master All masters are working together for maximum sensitivity and control of a complete area.

46 Lamps & Lighting Ltd Bridgewater Court, Network 65 Business Park, Burnley, BB11 5ST, UK t: +44 (0) f: +44 (0) e: Follow us on