Chains. By Rexnord. Rexnord Industries, Inc. Visit us on-line at

Size: px

Start display at page:

Download "Chains. By Rexnord. Rexnord Industries, Inc. Visit us on-line at"

Beverley Burns
6 years ago
Views:

1 Chains By Rexnord Rexnord Industries, Inc. Visit us on-line at

2 Steel Chains For the Right Application Rexnord is the world s leading manufacturer of TableTop chains and accessories. Rexnord offers three chain materials targeted at specific conveying needs. Longer runs are possible: 3m 3m 3m MCC 60-series/Rex SSC Optiplus chain material Beverage industries most recognized high performance material for demanding high-speed filling and pressureless combining conveyor systems. 8.2m 10.1m 12.6m MCC 10-series/Rex SS812 chain material Most popular material with exceptional wear and low friction properties for effective container conveying. Marbett MSS series MCC 10-series/ Rex SS812 Marbett MSS-series chain material Features that match less demanding slow speed, single file conveying with acceptable life and Rexnord sales and service support. MCC 60-series/ Rex SSC Optiplus Looking at an L-shaped conveyor with a 90 degree curve, running with 1.5 ltr PET bottles. Materials That Meet Your Speed Requirements: Materials That Can Provide Longest Possible Life: Max Speed Index Conveyor in meters/minute Marbett MSS MCC 10-series/ MCC 60-series/ Rex SS812 Rex SSC Optiplus % Wear 1 5 Running hours x MCC 60-series /Rex SSC Optiplus MCC 10-series /Rex SS812 Marbett MSS Chain Material Increased Production Speeds: High performance materials permit higher operating speeds. Chart assumes steel chain on a 35 L shaped conveyor running dry with a top load of 12 kg/mtr. Increased Wear Life: Any time two surfaces slide against each other there will be wear. The less wear, the longer a chain will last. Performance Matched To Industry Filling Speed: Specific Chains, Common Features: Run on standard sprockets. Operate on the same conveyor structures. Interchangeable and interlaceable. Backed by the experienced Rexnord technical assistance and local sales support. Containers per minute Brewing - Al Cans Soft Drink - Al Cans Brewing - Returnable Glass Brewing - Non-Returnable Glass Soft Drink - Glass Water - Glass Brewing - PET Soft Drink - PET - 20 oz, 500 ml Water - PET Milk - PET Brewing - Micro Soft Drink - 2 litre Milk - HDPE Milk - Cartons Juice - Asceptic Ice Cream Spirits - PET Yogurt - Plastic Wine - Glass Spirits - Glass

3 Side-flexing Chains 42.3 A 14 min (1.5") ø MSS8811MK MSS8811MK MSS8811MK Standard Series MSS8811K MSS8811K MSS8811K Bevel Series Straight Running Chains MSS8811TK MSS8811TK MSS8811TK TAB Series MSS812K MSS812K MSS812K Standard Series

4 Plastic Chains For the Right Application Rexnord is the world s leading manufacturer of TableTop chains and accessories. Rexnord offers three chain materials targeted at specific conveying needs. Low Friction Materials: 0.35 Rex HP TM chain material Beverage industries most recognized high performance material for demanding high-speed filling and run dry conveyor systems. Rex LF/MCC XL(G) chain material Most popular material with exceptional wear and low friction properties for effective container conveying. Marbett MLF chain material Features that match less demanding slow speed, single file conveying with acceptable life and Rexnord sales and service support. Coefficient of Friction Plastic (including PET) Metal Conveyed Product Material Glass Lowest Available Friction: All Rexnord chains exhibit a consistent backline pressure. Marbett MLF Rex LF/ MCC XL(G) Rex HP TM Materials That Meet Your Speed Requirements: Materials That Can Provide Longest Possible Life: Increased Production Speeds Max Speed For This Conveyor in meters/minute Marbett MLF Rex LF/ Rex HP TM MCC XL(G) % Wear 1 5 Running hours x Marbett MLF Rex LF MCC XL(G) Rex HP TM Chain Material Increased Production Speeds: High performance materials permit higher operating speeds. For this particular conveyor we assumed 880 chain running dry with a top load of 12 kg/mtr and 100% accumulation. The conveyor layout is 10 straight - 90 curve - 25 straight to the drive. Increased Wear Life: Any time 2 surfaces rub on each other there will be wear. The less wear, the longer a chain will last. Specific Chains, Common Features: Run on standard sprockets. Operate on the same conveyor structures. Interchangeable and interlaceable. Backed by the experienced Rexnord technical assistance and local sales support. Marbett Chains Typical Industries: Dairies. Wineries. Spirits. Pharmaceuticals. Electronics. Paper (paper towel, toilet paper, etc.).

5 Side-flexing Chains 7,5 K Rd min. = 50 38,1 Travel R 7, ,1 4 GC 11 Min. Side-flex Radius 0.28 in (7.1 mm) TAB Bottom 0.62 in (15.7 mm) Straight 1.81 in (46.0 mm) 0.16 in (4.0 mm) Curve 1.75 in (44.5 mm) 0.30 in (7.6 mm) 1.69 in (42.9 mm) Width Over TABs 2.41 in (61.2 mm) TAB Top 0.47 in (11.9 mm) Min. Side-flex Radius 0.34 in (8.6 mm) Straight 2.38 in (60.5 mm) TAB Bottom 0.90 in (22.9 mm) 0.19 in (4.8 mm) Curve 2.28 in (57.9 mm) 0.38 in (9.5 mm) 2.24 in (56.9 mm) Width Over TABs 2.99 in (75.9 mm) TAB Top 0.69 in (17.5 mm) MLF880MK MLF880MK Magnetic Series MLF880TK MLF880TK TAB Series MLF882TK MLF882TK MLF882TK MLF882TK TAB Series Straight Running Chains 0.16 in (4.1 mm) 0.19 in (4.8 mm) Outside Flight 0.12 in (2.9 mm) 1.97 in (50.0 mm) Min. Side-flex Radius Inside 0.15 in (3.8 mm) 0.47 in (12.0 mm) 0.32 in (8.1 mm) Chain Height 0.94 in (24.0 mm) Guide Clearance 2.28 in (58.0 mm) Chain Bottom 0.41 in (10.4 mm) 0.29 in (7.4 mm) 0.25 in (6.4 mm) 1.64 in (41.7 mm) 1.75 in (44.5 mm) Chain Bottom 0.38 in (9.5 mm) 0.31 in (7.9 mm) 0.25 in (6.4 mm) 5.38 in (136.5 mm) 5.50 in (139.7 mm) MLF Series MLF820K MLF820K MLF820K MLF820K Series MLF821K MLF821K MLF821K Series

Technical Specifications Marbett Chains Materials: MSS: Chrome steel MLF: Internally lubricated polyacetal Chemical Resistance: Do not use cleaning or lubricating agents with a ph below 4 or above 10.

6 Technical Specifications Marbett Chains Materials: MSS: Chrome steel MLF: Internally lubricated polyacetal Chemical Resistance: Do not use cleaning or lubricating agents with a ph below 4 or above 10. World Class Customer Service For over 100 years the dedicated people of Rexnord have delivered excellence in quality and service to our customers around the globe. Rexnord is a trusted name when it comes to providing skillfully engineered products that improve productivity and efficiency for industrial applications world-wide. We are committed to exceeding customer expectations in every area of our business: product design, application engineering, operations and customer service. Because of our customer focus, we are able to more thoroughly understand the needs of your business and have the resources available to work closely with you to reduce maintenance costs, eliminate redundant inventories and prevent equipment down time. WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: Fax: CANADA Rexnord Canada Ltd. Scarborough, Ontario Phone: Fax: EUROPE Rexnord FlatTop Europe b.v. s-gravenzande, Netherlands Phone: Fax: LATIN AMERICA Rexnord International, Inc. Milwaukee, Wisconsin Phone: Fax: UNITED STATES Rexnord Plastics Grafton, Wisconsin Phone: Fax: BRAZIL Rexnord Correntes Ltda. Sao Leopoldo - RS Phone: Fax: CHINA Rexnord China Shanghai Phone: Fax: Rexnord Marbett, S.r.L. Correggio (RE), Italy Phone: Fax: Rexnord FlatTop Germany Aßlar-Werdorf, Germany Phone: Fax: Rexnord FlatTop France Orly Cedex, France Phone: Fax: MEXICO Rexnord S.A. de C.V. Queretaro, Qro. Phone: Fax: SINGAPORE Rexnord International, Inc. Singapore City Phone: Fax: Eastern Service Center Smyrna, Georgia Phone: Fax: Central Service Center Grove City, Ohio Phone: Fax: Southern Service Center Arlington, Texas Phone: Fax: Western Service Center Fresno, California Phone: Fax: (06/03) Rexnord FlatTop Europe flattopeurope@rexnord.com

DTS -C. Conveyor Design Manual. Comb System 4707/

DTS -C. Conveyor Design Manual. Comb System 4707/ DTS -C Comb System Conveyor Design Manual 4707/5997-7705 Rexnord, Rex, TableTop, MatTop and DTS-C are trademarks of Rexnord Industries, Inc. All rights reserved. Table of Contents Introduction / Safety.................................