FITTINGS FOR TEMPERED GLASS

Transcription

1 FITTINGS FOR TEMPERED GLASS

2 Contents The Company 03 Product List 04 Fittings Specifications 08 External Doors Closers & Cover Plates 12 Door Rails, Side Panel Rails & Fixing Rails 16 U Channel 18 Corner Patch Fittings 19 Pivots & Patch Pivots 21 Clamping Patches 24 Locks & Lock Keeps 28 Euro Profile Cylinders 37 Accessories 38 Internal Doors Latches 40 Latchkeeps & Strike Boxes 43 Pivots & Hinges for Internal Doors 46 Internal Door Hinges 47 Lever/Lever Handles 49 Handles Pull Handles 52 Pull Handles & Knobs 53 Sliding Door Handles 54 Shower Fittings Shower Door Hinges 55 Glass Clamps for Showers 59 Stabilising Bars 62 Shower Door Knobs 64 Shower Seals 65 Shower Seals & Profiles 68 Shower Accessories 69 Balustrade Clamps Balustrade Clamps 70 Cut outs Cut-out References 76 Other Door Systems 84 Hydraulic Patch Fitting 85 WINCAS 86 Computerised Estimating System Door Knobs 50

3 The Company The AHD policy has always been to keep our products contemporary in styling. At AHD, we believe in making things easier for specifiers and contractors. In line with this thinking we hold considerable in depth stock of a large range of products from Europe's leading manufacturers. There is dedicated design and estimating software available, full fitting instructions and installation staff training programme. Adding these features to the flexibility of response, sound technical advice and delivery times makes this range of products a truly exciting one. We specialise in Internet sales, providing a one stop shop for developers and one off projects. We welcome small quantity orders. Sales Fax Web ahdltd@btconnect.com 03

4 Product List Part No. Section Page Part No. Section Page 021 Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Bath Europrofile Cylinders T/T Europrofile Cylinders Corner Patch Fittings Corner Patch Fittings Locks & Lock Keeps Corner Patch Fittings Corner Patch Fittings Corner Patch Fittings Closers & Cover Plates Corner Patch Fittings Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates A Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates A-C Accessories Accessories Locks & Lock Keeps A Pivots & Pivot Patches B Pivots & Pivot Patches P Pivots & Pivot Patches R Pivots & Pivot Patches S Pivots & Pivot Patches Pivots & Pivot Patches Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Clamping Patches Latch Keeps & Strike Boxes Pivots & Pivot Patches Door Rails/ Side Rails Door Rails/ Side Rails Door Rails/ Side Rails Door Rails/ Side Rails Locks & Lock Keeps /075 Locks & Lock Keeps Clamping Patches Clamping Patches Latch Keeps & Strike Boxes Clamping Patches Door Rails/ Side Rails E Door Rails/ Side Rails Door Rails/ Side Rails Europrofile Cylinders mm Europrofile Cylinders Clamping Patches Clamping Patches Clamping Patches Clamping Patches Pivots & Pivot Patches 23 04

5 Product List Part No. Section Page Part No. Section Page 084 Locks & Lock Keeps /086 Locks & Lock Keeps Clamping Patches Locks & Lock Keeps Locks & Lock Keeps Clamping Patches Clamping Patches Pivots & Pivot Patches Pivots & Pivot Patches Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Door Rails/ Side Rails Door Rails/ Side Rails Clamping Patches Clamping Patches Pivots & Hinges Pivots & Hinges Pivots & Hinges Pivots & Hinges Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Corner Patch Fittings Locks & Lock Keeps Latch Keeps & Strike Boxes Latch Keeps & Strike Boxes Lever/Lever Handles Lever/Lever Handles Lever/Lever Handles Lever/Lever Handles Door Knobs Door Knobs Latch Keeps & Strike Boxes Latch Keeps & Strike Boxes Locks & Lock Keeps Locks & Lock Keeps Locks & Lock Keeps Clamping Patches B-1705B Pivots & Pivot Patches Locks & Lock Keeps Clamping Patches Clamping Patches Pivots & Pivot Patches Locks & Lock Keeps Clamping Patches Locks & Lock Keeps Clamping Patches Clamping Patches Latches Balustrade Clamps Latches Balustrade Clamps Latches Balustrade Clamps Latches Pull Handles Locks & Lock Keeps Pull Handles Latches Pull Handles Latches Pivots & Pivot Patches Latches Pull Handles Latches /1 Pull Handles 53 05

6 Product List Part No. Section Page Part No. Section Page Locks & Lock Keeps Locks & Lock Keeps Pivots & Pivot Patches 23 19mm D Pull Handles Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Closers & Cover Plates Shower Door Knobs 53 5B01 Sliding Door Handles 54 5BN0 Sliding Door Handles 54 5F01 Stabilising Bars 62 5F01A Stabilising Bars 62 5F04 Stabilising Bars 62 5F07 Stabilising Bars 62 5F08 Stabilising Bars 63 5F09 Stabilising Bars 63 5F10 Stabilising Bars Closers & Cover Plates Latches Closers & Cover Plates Latches Closers & Cover Plates Closers & Cover Plates Pull Handles /4 Accessories Sliding Door Handles Pull Handles Door Rails/ Side Rails Door Rails/ Side Rails A Door Rails/ Side Rails P Door Rails/ Side Rails Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Glass Clamps for Showers Clamping Patches Shower Door Knobs Latch Keeps & Strike Boxes Latch Keeps & Strike Boxes Latch Keeps & Strike Boxes Latch Keeps & Strike Boxes 45 6M10 Accessories 39 6M12 Accessories 39 6M15 Accessories Pivots & Hinges Pivots & Hinges Pivots & Hinges Pivots & Hinges Closers & Cover Plates Closers & Cover Plates Shower Door Hinges Shower Door Hinges Shower Door Hinges Shower Door Hinges Shower Door Hinges R Shower Door Hinges Shower Door Hinges R Shower Door Hinges Shower Door Hinges 56 06

7 Product List Part No. Section Page Part No. Section Page 8505R Shower Door Hinges Shower Door Hinges R Shower Door Hinges Shower Door Hinges R Shower Door Hinges Shower Door Hinges Shower Door Hinges Shower Door Hinges 58 B0096 Locks & Lock Keeps 36 B93 Sliding Door Handles 54 B94 Locks & Lock Keeps 35 B95 Locks & Lock Keeps 35 B96 Locks & Lock Keeps 36 B97 Locks & Lock Keeps 36 G.02.0 Locks & Lock Keeps 34 G Latches Shower Door Hinges 58 G06.0 Latches Pivots & Hinges Pivots & Hinges Pivots & Hinges 48 8P06 Door Rails/ Side Rails 18 8P06 Shower Seals 68 8P08 Door Rails/ Side Rails 18 8P08 Shower Seals 68 8P10 Door Rails/ Side Rails 18 8P10 Shower Seals 68 8PI1-32 Shower Seals 68 8PT1-10 Shower Seals 65 8PT1-20 Shower Seals 65 8PT Shower Seals 68 8PT8-10 Shower Seals 65 G09.01 Latch Keeps & Strike Boxes 44 G09.01T Latch Keeps & Strike Boxes 44 IL700C Locks & Lock Keeps 34 IL701C Locks & Lock Keeps 34 LBM Lock Locks & Lock Keeps 35 R50SD Balustrade Clamps 74 Safety Pin Balustrade Clamps 73 SC201 Balustrade Clamps 70 SC202 Balustrade Clamps 70 SC203 Balustrade Clamps 70 SC204 Balustrade Clamps 71 SC205 Balustrade Clamps 71 SD50W30 Balustrade Clamps 73 SD50W30T Balustrade Clamps 73 8PT8-20 Shower Seals 65 SP227 Balustrade Clamps 74 8PT8-25 Shower Seals 66 8PT8-30 Shower Seals 66 8PT8-35 Shower Seals 66 8PT8-40 Shower Seals 66 8PT8-45 Shower Seals 67 8PT8-50 Shower Seals 67 8PT8-60/61 Shower Seals 67 SP8500 Shower Accessories 69 SS200 Balustrade Clamps 71 SS201 Balustrade Clamps 72 SS320 Balustrade Clamps 72 SS321 Balustrade Clamps 72 TC10 Shower Accessories 69 VT10 Shower Accessories 69 8PT8-70/71 Shower Seals 68 AG100W30 Balustrade Clamps 74 B0094 Locks & Lock Keeps 35 07

8 Fittings Specifications Product In selecting doors for any given situation, it is important to determine the direction of swing of doors in conjunction with the requirements of pedestrian traffic, fire departments and other uses. Consideration should be given to the need to protect an entrance from undesirable effects of the weather such as driving rain or strong winds. It may be necessary to set the entrance in from the general plane of the façade or provide a draught lobby. Fittings All SPEEDY floor springs have positional adjustment for width, height, length and diagonal alignment. Two separate valves independently control the closing and latching speeds of the door. The closing action of the door starts at 115 and ends at 0. Full instruction leaflets are given with each floor spring. It is important to allow room for the swing of the doors and their furniture and to provide adequate stops where over swing can occur. Consideration should be given to employing smaller door leaves, weaker floor springs, or both, where the elderly or infirm persons are able to operate them. In such circumstances it is important to take due account of wind action and the DDA regulations. Where doors are situated above a step(s) a platform should be provided to stand on whilst operating the door. It is bad practise to have a step up or down when passing through a doorway. Edge cover and clearances Flush channel In the case of a channel sunk into the structural face, the minimum recommended glass cover is 12mm. To guard against this cover being decreased, we suggest therefore, a nominal cover of 20mm. This allows for variations in the opening and for glass size tolerances. The clearance between the glass and the inside of the channel should not be less than 3mm. Surface Mounted channel The minimum requirements for the positioning of glass in a surface mounted application are the same as for flush channel. To allow for varying thicknesses of glazing channels, a minimum of 7mm has to be allowed between the glass and the structure. The floor springs are colour coded for three strengths with retention at 90 and non retention available in each strength. All SPEEDY floor springs have a light hold-open position from See separate table for floor spring specification on page 10/11. Handles and rules for hole requirements See page 51/54 for handle types available from stock. Bespoke handles will incur extra cost and lead time. Please consult with the glass processor for the position of holes in Tempered/Tempered Laminated glass. Door Rails The door rail consists of three split pressure cast alloy clamping blocks which contain the pivot connections and lock bodies. These clamping blocks are joined together by two aluminium extrusions which are grooved to take the slide on cover plates. These cover plates are finally retained by screwing on an end cap to each end of the rail. Patch fittings Patch fittings perform the function of linking panels and fins together and contain items such as locks, pivots, pivot adaptors etc., for doors, side panels and transoms. They consist of a split pressure cast alloy body, which clamps with gaskets and insulating bushes to the glass. Aluminium or stainless steel cover plates clip around the body and are retained by small grub screws. Gaskets will be supplied to suit 10mm glass unless otherwise specified. A TORQUE WRENCH MUST BE USED ON DOOR RAILS AND PATCH FITTINGS. SETTING NM 08

9 Fittings Specifications All fittings are available in a choice of standard finishes as shown. Other finishes can be obtained for which enquiries must be submitted and may entail an extended delivery period. Stock We will endeavour to carry the items in this catalogue in stock; however it may be prudent to check prior to ordering. Non Stock Items For situations which require non stock items an extended delivery period will apply. Locking All locks are manufactured to suit a double euro profile cylinder. The standard arrangement is for cylinders to be keyed alike, please specify individual keying. Other Glass thicknesses Door rails and patch fittings can be supplied to suit thicker glasses upon request. However these items may entail an extended delivery period. Please check for full details. Rules on Aspect Ratio Please consult tempered glass manufacturer. Glass Weights Thickness (mm) Weight (kg/m 2 ) Maximum sizes of Doors Thumbturn and Thumbturn bathroom cylinders are available. Customers can use their own cylinder systems, provided they are compatible with the profile illustrated below. Fins When should a fin be used? As a general guide, when the height of the transom plus the width of the adjacent side panel exceeds a total of 1400mm a fin is required. This is to cope with the load imposed on the assembly by the action of the door(s) and the external wind loads. The fins must be securely fixed to a suitably rigid structure at the top of the assembly. PLEASE NOTE Technical specifications for Tempered/Tempered Laminated glass are guidelines only. Please consult your glass processor for full information. Glass Door rails and patch fittings are supplied to suit 10mm and 12mm Tempered/Tempered Laminated glass. Please specify glass thickness with order to ensure that you receive the correct gaskets. Delivery We aim to deliver stock items in 1-2 days. Door rails, which have an element of manufacture and construction, 2-3 days. Orders for large quantities may affect the above. 09

10 Fittings Specifications Glazing Techniques It must be stressed that glass to metal contact must be avoided at all times. It is strongly recommended that the cover plates should not be fitted until completion of a job as part of the normal protection employed on site for this type of work. This is to avoid unnecessary damage, especially where there is likely to be continuous movement of personnel and materials. It is advisable to indicate the presence of glass during installation. Structural Movements It is vitally important, at the planning stage of a Glass Assembly, to take into account any possible movements in the structure due to thermal, liveload and deadload movements. These need to be accommodated in such a way that the assembly, being ground based, should always have sufficient clearance between the glass edge and the structure on the top and sides of the assembly. Door Clearances Floor Spring Specification KS3000 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Yellow force Red force Maximum door width Exterior Interior 90cm 110cm 100cm 120cm Cement case measurements: 80 x 270 x 56 Weight: 4.3 kg Note: 10

11 Fittings Specifications Floor Spring Specification M60 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Yellow force Red force Maximum door width Exterior Interior 90cm 110cm 100cm 120cm Cement case measurements: 96.5 x x 56 Weight: 5.1 kg M25 SPECIFICATIONS Technical data: Doors weighing up to 120 kg Maximum door width Exterior Interior Black force 110cm 140cm Cement case measurements: 130 x 283 x 65 Weight: 6.4 kg Note: OVERHEAD CONCEALED CLOSER SELECTION TABLE Door width Up to 750mm 751mm to 950mm 951mm to 1150mm Closer size 1 = Yellow 2 = Red 3 = Black Closing force 20 NM 27 NM 33 NM IMPORTANT INFORMATION It is the responsibility of the purchaser or specifier to ensure that the product ordered is appropriate to its application and that its use complies with all local and national legislation, building regulations, standards, and codes of practice and any other requirements. The descriptions and illustrations in this document shall not form part of any contract and/ or liability, howsoever arising, for the consequences of relying on them is hereby disclaimed. The right to alter specifications without prior notice is reserved. Publication of this document does not imply freedom from patents or other protective rights. 11

12 Closers & Cover Plates Speedy M60 Floor Closer Strength 021 Yellow Hold Open 022 Yellow No Hold Open 023 Red Hold Open 024 Red No Hold Open Speedy M60 Floor Closer Cover Plates 0304 Satin Stainless Steel 0305 Polished Stainless Steel 0307 Polished Brass Speedy M25 Floor Closer Strength 025 Black Hold Open 026 Black No Hold Open Speedy M25 Floor Closer Cover Plates 0314 Satin Stainless Steel 0315 Polished Stainless Steel 0317 Polished Brass 12

13 Closers & Cover Plates Speedy KS3000 Floor Closer Strength 027 Yellow Hold Open 028 Yellow No Hold Open 029 Red Hold Open 030 Red No Hold Open Speedy KS3000 Floor Closer Cover Plates 0326 Satin Stainless Steel 0327 Polished Stainless Steel 0328 Polished Brass 0310 Suspenson Box for KS3000 Floor Closer To cover the suspension box completely use part no 0314A below. Speedy SM25 Floor Closer Cover Plates To completely cover the suspension box 0314A Satin Stainless Steel 13

14 Closers & Cover Plates Overhead Concealed Closer Strength 3102 Yellow No Hold Open 3103 Yellow Hold Open 3112 Red No Hold Open 3113 Red Hold Open 3122 Black No Hold Open 3123 Black Hold Open Normally fitted into an aluminium box section supplied by others. Cover Plates not available for this product mm Pivot Point Fixing Bracket To be used with the Overhead Concealed Closer in conjunction with the Speedy top door rail Triloba Bottom Door Closer Imitation Stainless Steel Matt Chrome Polished Chrome 8202 Triloba Top Door Closer Imitation Stainless Steel Matt Chrome Polished Chrome 14

15 Ø Closers & Cover Plates 24mm Spindle Extension 2914 Brass Bottom Strap Brass body Bottom Strap Aluminium body

16 Door Rails, Side Panel Rails & Fixing Rails Bottom Door Rail Non-locking 0412 Satin Anodised Aluminium 0414 Satin Stainless Steel 0415 Polished Stainless Steel Glass deduction 55mm Bottom Door Rail Locking 0422 Satin Anodised Aluminium 0424 Satin Stainless Steel 0425 Polished Stainless Steel Glass deduction 55mm Top Door Rail Non-locking 0432 Satin Anodised Aluminium 0434 Satin Stainless Steel 0435 Polished Stainless Steel Glass deduction 55mm Top Door Rail Locking 0442 Satin Anodised Aluminium 0444 Satin Stainless Steel 0445 Polished Stainless Steel Glass deduction 55mm 16

17 Door Rails, Side Panel Rails & Fixing Rails Bottom Side Panel Rail 0472 Satin Anodised Aluminium 0474 Satin Stainless Steel 0475 Polished Stainless Steel 047E Side Rail End Cap DBA Glass deduction 62mm Supplied with one end cap Top Side Panel Rail 0482 Satin Anodised Aluminium 0484 Satin Stainless Steel 0485 Polished Stainless Steel 047E Side Rail End Cap DBA Glass deduction 58mm Supplied with one end cap Clamping Rail 4m Lengths End caps SAA Satin Anodised Aluminium ISS Imitation Stainless Steel Unsupported overpanels may require an alternative section ref Satin Anodised Aluminium U Channel Dimensions m Stock lengths 4302A 3m Stock lengths A

18 U Channel 8P06 Stainless Steel U channel 8P08 Stainless Steel U channel 8P10 Stainless Steel U channel 8P06 SSS 8P08 PSS 8P06 PSS 8P10 SSS 8P08 SSS 8P10 PSS Standard length 2200mm 6mm 8mm 10mm Bright Anodised U Channel 4302P Bright Anodised Standard length 2490mm x 20 Aluminium U Channel ISS Imitation Stainless Steel SAA Satin Anodised 6m Lengths for collection only 1m, 2m & 3m lengths available for delivery 20 x 40 Aluminium U Channel ISS Imitation Stainless Steel SAA Satin Anodised 6m Lengths for collection only 1m, 2m & 3m lengths available for delivery 18

19 Corner Patch Fittings 051 Bottom Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T D Bottom Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To suit German Spindle 052 Top Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T Top Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with a bottom door rail. Pivot point 65mm (68mm) 19

20 Corner Patch Fittings Top Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjuction with Pivot point 67mm (70mm) Bottom Freeswing Patch with Adaptor Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with 052 Top Patch To be used in conjunction with 058B Pivot Bottom Patch with Adaptor for Overhead Concealed Closer Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 To be used in conjunction with Top Patch To be used in conjunction with 058B Pivot Pivot point 67mm (70mm) 20

21 Pivots & Patch Pivots 058A Adjustable Top Centre 058B Bottom Freeswing Pivot To be used in conjunction wiith & only 058P Top Centre Pivot (Patches) Satin Anodised Aluminium ø5, ,5 21,5 ø = = R Top Centre Pivot (Rails) Satin Anodised Aluminium ø5, ,5 21,5 ø = =

22 Pivots & Patch Pivots 058S Top Centre Pivot (Screw in) 059 Bottom Freeswing Pivot Satin Stainless Steel To be used with bottom door rails & 052 Patch fitting only 072 Transom/ Jamb Patch with Pivot Cover code 1502 Satin Anodised Aluminium 1504 Satin Stainless Steel 1505 Polished Stainless Steel 1508 GSM Satin Stainless Steel 1509 GSM Polished Stainless Steel Cut-out code T4-01 Fixing Bracket sold separately Fixing Bracket for b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 &

23 Pivots & Patch Pivots 083 Transom/Side Panel Patch with Pivot Cover code 1812 Satin Anodised Aluminium 1814 Satin Stainless Steel 1815 Polished Stainless Steel 1818 GSM Satin Stainless Steel 1819 GSM Polished Stainless Steel Cut-out code T4-01 and T Transom/Side Panel Patch with Pivot and Fin attachment Cover code 1912 Satin Anodised Aluminium 1914 Satin Stainless Steel 1915 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T Transom/Side Panel Patch with Pivot and Fin attachment Cover code 1952 Satin Anodised Aluminium 1954 Satin Stainless Steel 1955 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T

24 Clamping patches 071 Transom/Jamb Patch Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T4-05 Fixing Bracket sold separately Fixing Bracket for b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 & Head Fixing Angle Cover code 1722 Satin Anodised Aluminium 1724 Satin Stainless Steel 1725 Polished Stainless Steel Cut-out code T Head/Jamb Fixing Clamp Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T

25 Clamping patches 078 Bottom Fixing Clamp Cover code 1702 Satin Anodised Aluminium 1704 Satin Stainless Steel 1705 Polished Stainless Steel Cut-out code T Jamb Fixing Clamp Cover code 1832 Satin Anodised Aluminium 1834 Satin Stainless Steel 1835 Polished Stainless Steel Cut-out code T Four Panel Connector Item code Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Cut-out code T4-08 (4 no), T4-06 (2 no) 081 Transom/Side Panel Patch Cover code 1802 Satin Anodised Aluminium 1804 Satin Stainless Steel 1805 Polished Stainless Steel Cut-out code T4-06 and T

26 Clamping patches 082 Transom/Side Panel Patch with Stop Cover code 1802 Satin Anodised Aluminium 1804 Satin Stainless Steel 1805 Polished Stainless Steel Cut-out code T4-06 and T Transom Double Door Stop Cover code 1832 Satin Anodised Aluminium 1834 Satin Stainless Steel 1835 Polished Stainless Steel Cut-out code T Transom/Side Panel Fin Patch Cover code 1902 Satin Anodised Aluminium 1904 Satin Stainless Steel 1905 Polished Stainless Steel Cut-out code T4-06 and T4-08, fin T Transom/Side Panel Fin Patch Cover code 1892 Satin Anodised Aluminium 1894 Satin Stainless Steel 1895 Polished Stainless Steel Cut-out code T4-06 and T4-08, fin T

27 Clamping patches 105 Four Panel Connector with Fin Item code Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Cut-out code T4-08 (4 no), T4-06 (2 no) and T4-13 fin 106 Four Panel 90 o Connector Item code Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Cut-out code T4-25 and T Two Panel 90 o Connector Item code Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel A B Cut-out code T4-23 and T

28 Locks & Lock Keeps 053 Corner Patch with Lock Cover code 1512 Satin Anodised Aluminium 1514 Satin Stainless Steel 1515 Polished Stainless Steel 1518 GSM Satin Stainless Steel 1519 GSM Polished Stainless Steel Cut-out code T4-01 Europrofile cylinder not included 056 Centre Patch Lock Cover code 1522 Satin Anodised Aluminium 1524 Satin Stainless Steel 1525 Polished Stainless Steel Cut-out code T1-15 Europrofile cylinder not included Push over Shoot Bolt Item code ISS Imitation Stainless Steel SAA Satin Anodised Aluminium Bottom Lock Item code Complete with Covers SSS Imitation Stainless Steel 53 Cut-out code T ø11 10,

29 Locks & Lock Keeps Bottom Lock with Thumbturn Item code Complete with Covers SSS Satin Stainless Steel ø ø9 Cut-out code T Push over Lock Item code Complete with Covers SAA Satin Anodised Aluminium mm Glass only Includes Half Cylinder 42 ø Bottom Lock Shoot Keep Item code Complete with Covers 061 Polished Stainless Steel 061 SAA Bottom Lock Shoot Keep Item code 061 SAA Satin Anodised Aluminium ø13 ø24, ø4 ø16 29

30 Locks & Lock Keeps 062 Head/Jamb Lock Shoot Keep 062 Satin Stainless Steel 063 Head Lock Shoot Keep with Stop 063 Satin Stainless Steel 064 Jamb Lock Shoot Keep with Stop 064 Satin Stainless Steel 065 Centre Side Panel Lock Shoot Keep Cover code 1602 Satin Anodised Aluminium 1604 Satin Stainless Steel 1605 Polished Stainless Steel Cut-out code T

31 Locks & Lock Keeps 066 Centre Side Panel Lock Shoot Keep with Stop Cover code 1602 Satin Anodised Aluminium 1604 Satin Stainless Steel 1605 Polished Stainless Steel Cut-out code T Transom/Jamb Patch with Lock Shoot Keep Cover code 1712 Satin Anodised Aluminium 1714 Satin Stainless Steel 1715 Polished Stainless Steel 1718 GSM Satin Stainless Steel 1719 GSM Polished Stainless Steel Fixing Bracket sold separately 074/075 Transom/Jamb Patch with Lock Shoot Keep & Stop Cover code 1712 Satin Anodised Aluminium 1714 Satin Stainless Steel 1715 Polished Stainless Steel 1718 GSM Satin Stainless Steel 1719 GSM Polished Stainless Steel Fixing Bracket sold separately Fixing Bracket for 073, 074 & b 1704b 1705b Satin Anodised Aluminium Satin Stainless Steel Polished Stainless Steel Can be used with 071, 072, 073, 074 &

32 Locks & Lock Keeps 084 Transom/Side Panel Patch with Lock Shoot Keep Cover code 1822 Satin Anodised Aluminium 1824 Satin Stainless Steel 1825 Polished Stainless Steel 1828 GSM Satin Stainless Steel 1829 GSM Polished Stainless Steel Cut-out code T4-01 and T Transom/Side Panel Patch with LSK and Stop Cover code 1822 Satin Anodised Aluminium 1824 Satin Stainless Steel 1825 Polished Stainless Steel 1828 GSM Satin Stainless Steel 1829 GSM Polished Stainless Steel Cut-out code T4-01 and T Transom Double Door Lock Shoot Keep Cover code 1842 Satin Anodised Aluminium 1844 Satin Stainless Steel 1845 Polished Stainless Steel Cut-out code T Transom Double Door Lock Shoot Keep with Stop Cover code 1842 Satin Anodised Aluminium 1844 Satin Stainless Steel 1845 Polished Stainless Steel Cut-out code T

33 Locks & Lock Keeps 095 Transom/Side Panel Fin Patch with Lock Shoot Keep Cover code 1922 Satin Anodised Aluminium 1924 Satin Stainless Steel 1925 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T Transom/Side Panel Fin Patch with Lock Shoot Keep Cover code 1932 Satin Anodised Aluminium 1934 Satin Stainless Steel 1935 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T Transom/Side Panel Fin Patch with Lock Shoot Keep and Stop Cover code 1922 Satin Anodised Aluminium 1924 Satin Stainless Steel 1925 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T Transom/Side Panel Fin Patch with Lock Shoot Keep and Stop Cover code 1932 Satin Anodised Aluminium 1934 Satin Stainless Steel 1935 Polished Stainless Steel Cut-out code T4-06 and T4-01, fin T

34 Locks & Lock Keeps Push over Lock Keep Item code Complete with Covers SAA Satin Anodised Aluminium mm Glass only Indicator Lock Glass to Wall IL700C Matt Chrome IL700C Polished Chrome Includes lock shoot keep Indicator Lock Glass to Glass IL701C Matt Chrome IL701C Polished Chrome Includes lock shoot keep Push Over Lock Glass to Glass G mm SSS G mm SSS A minimum gap of 4mm is required between doors 34

35 155 Locks & Lock Keeps Push Over Lock Glass to Glass LBM Lock SSS 10mm LBM Lock SSS 12mm A minimum gap of 4mm is required between doors B94 Hook Lock with finger pull B94 ISS Imitation Stainless Steel B94 SAA Satin Anodised 8/10mm Glass B0094 Lock Keep for B for B0094 ISS Imitation Stainless Steel B0094 Matt Matt B95 Lock Keep with finger pull for B94 B95 ISS Imitation Stainless Steel B95 SAA Satin Anodised 8/10mm Glass 35

36 Locks & Lock Keeps B96 Hook Lock B96 ISS Imitation Stainless Steel B96 SAA Satin Anodised 8/10mm Glass B0096 Lock Keep for B96 for B0096 ISS Imitation Stainless Steel B0096 Matt Matt B97 Lock Keep for Hook Lock for B96 B97 ISS Imitation Stainless Steel B97 SAA Satin Anodised 8/10mm Glass 36

37 Euro Profile Cylinders 51mm Europrofile Cylinder 0497 Nickel Cylinders can be keyed alike (30 maximum) or individual. 60mm Bathroom Cylinder 0497 Bathroom cylinder 60mm Thumbturn Cylinder 0497 T/Turn 60mm 0497 T/Turn 60mm KA Cylinders can be keyed alike (6 maximum) or individual. 60mm Europrofile Cylinder mm KA Cylinders can be keyed alike (6 maximum) or individual. 37

38 Accessories Floor Stops 032A 032B 032C Satin Stainless Steel Polished Brass Satin Stainless Steel 032A Pepperpot 032B Brass 032C Oval Head Stop 033 Satin Stainless Steel Letter Box with 2 flaps 4062 Satin Anodised 4064 Imitation Stainless Steel Cut-out code L

39 Accessories Magnetic Door Stopper 8mm / 10mm 6M10 ISS Imitation Stainless Steel 6M10 Matt Matt Chrome 6M10 Pol Polished Chrome Magnetic Door Stopper 12mm 6M12 ISS Imitation Stainless Steel 6M12 Matt Matt Chrome 6M12 Pol Polished Chrome Magnetic Plate for 6M10 & 6M12 6M15 ISS Imitation Stainless Steel 6M15 Matt Matt Chrome 6M15 Pol Polished Chrome 39

40 Latches Quadra Locking Latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles, cylinder and Lock Keep sold separately Cut-out code T1-14 8/ Quadra Non-locking Latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles and Lock Keep sold separately Cut-out code T / Quadra Locking Latch with Thumbturn Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Lock one side only Handles and Lock Keep sold separately Cut-out code T / Quadra Non-locking Latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles and Lock Keep sold separately Cut-out code T /10 40

41 Latches Claustra Locking latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles, cylinder and Lock Keep sold separately Cut-out code T1-14 8/ Claustra Non-locking latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles and Lock Keep sold separately Cut-out code T1-14 8/ Claustra Locking Latch with Thumbturn Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Lock one side only Handles and Lock Keep sold separately Cut-out code T1-14 8/ Claustra Non-locking latch Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Handles and Lock Keep sold separately Cut-out code T1-14 8/10 41

42 Latches G04.0 Lever Latchset Item code Complete with Covers G04.0 SSS Satin Stainless Steel G04.0 BSS Bright Stainless Steel Includes handle and cylinder This item is handed G06.0 Lever Latchset no cut out Item code Complete with Covers G06.0 BSS Bright Stainless Steel Includes handle and thumbturn This item is handed 6640 Leverless Latch Cover code 6640 SAA Satin Anodised Aluminium 6640 SSS Satin Stainless Steel 6640 PSS Polished Stainless Steel 8/10mm Glass 6645 Leverless Dual Action Latch Cover code 6645 SAA Satin Anodised Aluminium 6645 SSS Satin Stainless Steel 6645 PSS Polished Stainless Steel 8/10mm Glass 42

43 Latchkeeps & Strike Boxes Jamb Strike Plate for Claustra/Quadra Latchsets Satin Stainless Steel Jamb Strike Plate for Claustra/Quadra Latchsets Satin Stainless Steel Quadra Strike Box Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel / Cut-out code T Claustra Strike Box Item code Complete with Covers ISS Imitation Stainless Steel SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel / Cut-out code T

44 Latchkeeps & Strike Boxes G09.01 Latch Keep for G04.0 & G06.0 G09.1 Satin Stainless Steel G09.01T Latch Keep with Stop for G04.0 & G06.0 G09.1T Satin Stainless Steel This item is handed 0040 Latch Keep for 6640 & Satin Stainless Steel 0045 Latch Keep with Stop for 6640 & 6645 Complete with Covers 0045 Satin Stainless Steel 44

45 Latchkeeps & Strike Boxes 6840 Strike Box Cover code 6840 SAA Satin Anodised Aluminium 6840 SSS Satin Stainless Steel 6840 PSS Polished Stainless Steel 8/10mm Glass 6845 Strike Box with Stop Cover code 6845 SAA Satin Anodised Aluminium 6845 SSS Satin Stainless Steel 6845 PSS Polished Stainless Steel 8/10mm Glass 6870 Electric Strike Plate Item code 6870 ISS Imitation Stainless Steel Fail Secure AC/DC 12 Volt 6875 Electric Strike Box Cover code Complete with Covers 6875 SAA Satin Anodised Aluminium 6875 SSS Satin Stainless Steel 6875 PSS Polished Stainless Steel Fail Secure AC/DC 12 Volt 8/10mm Glass 45

46 Pivots & Hinges for Internal Doors Internal Door Pivot Patch Item code Complete with Covers SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel 38/ / Cut-out code T /12 13/ Internal Door Pivot Patch Item code Complete with Covers SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel 118 8/ Cut-out code T /12 13/ Quadra Internal Door Hinge Item code Complete with Covers SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel /10 22/24 Cut-out code T Claustra Internal Door Hinge Item code Complete with Covers SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Please note drilling detail differs from /10 22/24 Cut-out code T

47 Internal Door Hinges 8010 Biloba Self Closing Hinge 10mm 12mm 1000mm 100kg -10 C +50 C ISS Imitation Stainless Steel 8010 Matt Matt Chrome 8010 Pol Polished Chrome 1000mm 100kg -10 C +50 C 8011 Biloba Self Closing Hinge 10mm 12mm 1000mm 100kg -10 C +50 C +50 C ISS Imitation Stainless Steel 8011 Matt Matt Chrome 8011 Pol Polished Chrome 8015 Biloba Self Closing Hinge 10mm 12mm 1000mm 80kg -10 C +50 C ISS Imitation Stainless Steel 8015 Matt Matt Chrome 8015 Pol Polished Chrome 8060 Biloba Self Closing Hinge Single Action 10mm 12mm 1000mm 100kg 100kg -10 C +50 C ISS Imitation Stainless Steel 8060 Matt Matt Chrome 8060 Pol Polished Chrome -10 C +50 C 47

48 Internal Door Hinges 8700 Door Hinge 8mm 10mm 12mm 900mm 60kg ISS Imitation Stainless Steel 8700 Matt Matt Chrome 8700 Pol Polished Chrome 8701 Door Hinge 8mm 10mm 12mm 900mm 60kg ISS Imitation Stainless Steel 8701 Matt Matt Chrome 8701 Pol Polished Chrome 8705 Door Hinge 8mm 10mm 12mm 900mm 60kg ISS Imitation Stainless Steel 8705 Matt Matt Chrome 8705 Pol Polished Chrome 48

49 Lever/Lever Handles Lever Handles SSS Satin Stainless Steel Duo Dual PSS Polished Stainless Steel 60 ø ø Lever Handles SSS Satin Stainless Steel Duo Dual PSS Polished Stainless Steel 60 ø Lever Handles SSS Satin Stainless Steel Duo Dual PSS Polished Stainless Steel 60 ø Lever Handles SAA Satin Anodised SSS Satin Stainless Steel PSS Polished Stainless Steel 49

50 Door Knobs Door Knob SAA Satin Anodised Door Knob SAA Satin Anodised ISS Imitation Stainless Steel Technical Information NB: It is also possible to choose lever handles of other manufactures if they meet these standards. 50

51 Pull Handles Standard Pad Handle 4032 Satin Anodised Aluminium 4034 Satin Stainless Steel 4035 Polished Stainless Steel D Type Handle Hole diameter 16-18mm Hole centres 360mm SAA Satin Anodised Aluminium Picture for representation only. Actual handle may differ D Type Handle Hole diameter 14-16mm Hole centres 350mm SSS Satin Stainless Steel PSS Polished Stainless Steel Picture for representation only. Actual handle may differ E Type Handle Sizes o/all 600mm 1200mm 1800mm hole diam hole cent' 450mm 1050mm 1650mm 12mm SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. 33mm Dia 51

52 Pull Handles Cranked D Type Handle SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Picture for representation only. Actual handle may differ Cranked C Type Handle SAA Satin Anodised Aluminium SSS Satin Stainless Steel PSS Polished Stainless Steel Picture for representation only. Actual handle may differ. D Handle 19mm D Handle 19mm Diameter Duo D Handle 19mm Diameter SSS D Handle 19mm Diameter PSS 14mm Diameter Hole in glass Elbaline Door Handle Satin Stainless Steel Overall height Hole Centres Hole dia 450mm 300mm 20mm 52

53 Pull Handles & Knobs Tubo Locking Door Handle Satin Stainless Steel Tubo Locking Door Handle (One Sided) Satin Stainless Steel 5400 Door Knob 5400 Matt Matt Chrome 5400 Pol Polished Chrome 5401 Door Knob 5401 Matt Matt Chrome 5401 Pol Polished Chrome 53

54 Sliding Door Handles Shell Handle 70mm Dia SSS B93 Handle for Sliding Door B93 ISS Imitation Stainless Steel B93 SAA Satin Anodised Aluminium 16mm Dia Holes 5B01 Handle for Sliding Door 5B01 ISS Imitation Stainless Steel 5B01 SAA Satin Anodised Aluminium 34mm Dia Hole 5BN0 Handle for Sliding Door 5B0 ISS Imitation Stainless Steel 5B0 SAA Satin Anodised Aluminium 14mm Dia Holes, 200mm Centres 54

55 Shower Door Hinges 8400 Glass to Wall hinge 6mm 8mm 10mm 800mm 44kg 8400 Matt Chrome 8400 Pol Chrome 8401 Glass to Glass hinge 6mm 8mm 10mm 800mm 40kg 8401 Matt Chrome 8401 Pol Chrome 8410 Glass to Wall rising hinge 6mm 8mm 10mm 800mm 44kg 8410 Matt Chrome 8410 Pol Chrome Order Left or Right handed 8411 Glass to Glass rising hinge 6mm 8mm 10mm 800mm 40kg 8411 Matt Chrome 8411 Pol Chrome Order Left or Right handed 55

56 Shower Door Hinges 8500 & 8500R Glass to Wall hinge 6mm 8mm 10mm 700mm 40kg Matt Chrome 8500 Pol Chrome 8500R Matt Chrome 8500R Pol Chrome R = Adjustable hinge 8501 & 8501R Glass to Wall hinge 6mm 8mm 10mm 700mm 40kg Matt Chrome 8501 Pol Chrome 8501R Matt Chrome 8501R Pol Chrome R = Adjustable hinge 8505 & 8505R Glass to Glass hinge 180 6mm 8mm 10mm 700mm 35kg Matt Chrome 8505 Pol Chrome 8505R Matt Chrome 8505R Pol Chrome R = Adjustable hinge 56

57 Shower Door Hinges 8506 & 8506R Glass to Wall hinge 90 6mm 8mm 10mm 700mm 35kg Matt Chrome 8506 Pol Chrome 8506R Matt Chrome 8506R Pol Chrome R = Adjustable hinge 8507 & 8507R Glass to Glass hinge 135 6mm 8mm 10mm 700mm 35kg Matt Chrome 8507 Pol Chrome 8507R Matt Chrome 8507R Pol Chrome R = Adjustable hinge 8560 Glass to Wall hinge Single action 6mm 8mm 10mm 700mm 40kg Matt Chrome 8560 Pol Chrome 57

58 Shower Door Hinges 8565 Glass to Glass hinge Single action 180 6mm 8mm 10mm 700mm 35kg Matt Chrome 8565 Pol Chrome 8566 Glass to Glass hinge Single action 90 6mm 8mm 10mm 700mm 35kg Matt Chrome 8566 Pol Chrome 8567 Glass to Glass hinge Single action 135 6mm 8mm 10mm 700mm 35kg Matt Chrome 8567 Pol Chrome 58

59 Glass Clamps for Showers 4410 Glass to Wall clamp 6mm 8mm 10mm 800mm 40kg 4410 Matt Chrome 4410 Pol Chrome 4411 Glass to Glass clamp 6mm 8mm 10mm 800mm 40kg 4411 Matt Chrome 4411 Pol Chrome 4414 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4414 Matt Chrome 4414 Pol Chrome 59

60 Glass Clamps for Showers 4415 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4415 Matt Chrome 4415 Pol Chrome 4418 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4418 Matt Chrome 4418 Pol Chrome 4419 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4419 Matt Chrome 4419 Pol Chrome 60

61 Glass Clamps for Showers 4428 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4428 Matt Chrome 4428 Pol Chrome 4429 Glass to Glass clamp 6mm 8mm 10mm 700mm 35kg 4429 Matt Chrome 4429 Pol Chrome 4500 Glass to Wall clamp 6mm 8mm 10mm 700mm 35kg 4500 Matt Chrome 4500 Pol Chrome 4502 Glass to Wall clamp 6mm 8mm 10mm 800mm 40kg 4502 Matt Chrome 4502 Pol Chrome 61

62 Stabilising Bars 5F01 Stabilising Bar 900mm 5F01A Stabilising Bar 1200mm 6mm 8mm 10mm 5F01 Matt Chrome 5F01 Pol Chrome 5F01A Matt Chrome 5F01A Pol Chrome F04 Stabilising Bar 6mm 8mm 10mm 5F04 Matt Chrome 5F04 Pol Chrome F07 Stabilising Bar 6mm 8mm 10mm 5F07 Matt Chrome 5F07 Pol Chrome 62

63 Stabilising Bars 5F08 Stabilising Bar 6mm 8mm 10mm 5F08 Matt Chrome 5F08 Pol Chrome 5F09 Stabilising Bar 6mm 8mm 10mm 5F09 Matt Chrome 5F09 Pol Chrome 5F10 Stabilising Bar 6mm 8mm 10mm 5F10 Matt Chrome 5F10 Pol Chrome 63

64 Shower Door Knobs 5400 Shower Door Knob 6mm 8mm 10mm 5400 Matt Chrome 5400 Pol Chrome 5401 Shower Door Knob 6mm 8mm 10mm 5401 Matt Chrome 5401 Pol Chrome 64

65 Shower Seals 8PT8-10 Shower Seal 2.2m 8PT8-10 8PT1-10 Shower Seal 2.5m 8PT1-10 8PT8-20 Shower Seal 2.2m 8PT8-20 8PT1-20 Shower seal 2.5m 8PT

66 37 Shower Seals 8PT8-25 Shower Seal 2.2m 8PT8-25 8PT8-30 Shower Seal 2.2m 8PT8-30 8PT8-35 Shower Seal 2.2m 8PT8-35 8PT8-40 Shower Seal 2.2m 8PT

67 Shower Seals 8PT8-45 Shower Seal 2.2m 8PT8-45 8PT8-50 Magnetic Shower Seal 2.2m 8PT8-50 8PT8-60/61 Magnetic Shower Seal 2.2m 8PT8-60NS 8PT8-61SN 8PT1-60/61 Magnetic Shower Seal 2.5m 8PT1-60NS 8PT1-61SN 67

68 Shower Seals & Profiles 8PT8-70/71 Magnetic Shower Seal 2.2m 8PT8-70NS 8PT8-71SN 8PI1-32 Stainless Steel Seal 2.2m for 8PT8-60/61 & 8PT1-60/61 8PI1-32 Supplied separately 8P06 Stainless Steel U channel 2.2m 8P08 Stainless Steel U channel 2.2m 8P10 Stainless Steel U channel 2.2m 8P06 SSS 8P06 PSS 8P08 SSS 8P08 PSS 8P10 SSS 8P10 PSS 6mm 8mm 10mm 68

69 Shower Accessories SP8500 Adjustment Shim SP8500 TC10 Screw Covers VT10 Stainless Steel Screws VT10 Stainless Steel 69

70 Balustrade Clamps SC201 8/10/12mm Glass SC201 SSS SC201 PSS 16mm/18mm Hole SC202 8/10/12mm Glass SC202 SSS SC202 PSS 16mm/18mm Hole SC203 8/10/12mm Glass 180 o SC203 SSS SC203 PSS 16mm/18mm Hole 70

71 Balustrade Clamps SC204 8/10/12mm Glass 135 o SC204 SSS SC204 PSS 16mm/18mm Hole SC205 8/10/12mm Glass 90 o SC205 SSS SC205 PSS 16mm/18mm Hole SS200 8/10/12mm Glass SS200 SSS SS200 PSS Optional safety pin available L H Y 55mm 55mm 16mm 71

72 Balustrade Clamps SS201 8/10/12mm Glass SS201 SSS SS201 PSS Optional safety pin available L H Y R 55mm 55mm 16mm 25mm SS320 8/10/12mm Glass SS320 SSS SS320 PSS Optional safety pin available L H Y 60mm 55mm 16mm SS321 8/10/12mm Glass SS321 SSS SS321 PSS Optional safety pin available L H Y R 60mm 55mm 16mm 25mm 72

73 Balustrade Clamps Safety Pin for SS Clamps Safety Pin 6mm 1mm 15mm 22mm 6mm Dia SS200/201 = 28mm from base to centre of pin SS320/321 = 30mm from base to centre of pin 50mm Maxi Disc SSS SD50W30 Ø23mm 50mm Maxi Disc SSS SD50W30 T 23mm Dia hole 73

74 Balustrade Clamps 100mm Maxi Disc SSS AG100W30 Clamp for Fixing Lug SSS R50SD Stub Post Stainless Steel SP227 GF SP227 SM Grout Fixing Surface Mounted 74

75 Balustrade Clamps Alignment Clamp SAA ISS Balustrade Clamp for thick glass SAA ISS w= / C V V V C V V V Balustrade Clamp for thick glass SAA ISS w=104 C V C V V V V V

76 Cut out References T1.02 T1.03 T ø16/ ø ø16 28 T1.12 T1.14 T ø ø18 T4.01 T4.05 T ø18 R10 ø18 36 R T4.07 T4.08 T ø ø18 ø18 36 ø16/ R R T T4.19 ø25 T4.22 ø16/18 30 ø These drawings are NOT to scale 76

77 Cut out References 77 T4.23 T4.26 TC4.02 TC4.07 TC4.13 T4.24 T4.27 TC4.04 TC4.08 TC4.14 T4.25 TC4.01 TC4.06 TC4.11 TC ø ø18 ø16/ R73 ø16/ /187 T4.01 T /187 73/75 T4.22 T /75 T4.06 T /75 73/75 T /75 36 T4.22 T4.24 T /299 T /75 36 T4.08 T /75 T /75 T4.08

78 Cut out References

79 Cut out References

80 Cut out References 6640, 6645, 6840, 6845 & , Valvola di regolazione velocità chiusura anta Adjuste de velocidad de cierre de la puerta Adjusment valve closing speed of glazed Regelsventil für die türschließgeschwindigkeit

81 Cut out References , 8500R, 8501 & 8501R 8505 & 8505R 8506 & 8506R R 5 R ø & 8507R 8560 MISMA MUESCA SAME NOTCH SELBES EINSCHNITT 81

82 Cut out References MISMA ESPIGAS SAME HOLES SELBES LÖCHER 8700 & B94 & B95 B96 & B97 82

83 Cut out References G04.0 & G04.1T L1.01 IL 700C IL701C SC201 SC202 SC203 SC204 SC205 83

84 Other Door Systems Panic Hardware Panic Hardware available. Details and prices on request. Junior sliding stacking door system Sliding stacking door system incorporating various types of parking bay. Maximum leaf size 1000mm x 2800mm Elbaline Bi-Parting door system Point fixed sliding door system incorporating 2 solid stainless steel rods. Maximum leaf size 1300mm x 2600mm Pico Bi-Parting door system Bi-Parting door system incororating either a face fixed or ceiling fixed upper track. Maximum leaf weight 150kgs Minimum leaf size 700mm x 2050mm Fluxo Bi-Parting door system Point fixed sliding door system incorporating Mulpile solid stainless steel rods joined together. Maximum leaf size 1100mm x 2700mm Praktica & Variant sliding door systems Bi-Parting door system incororating either a face fixed or ceiling fixed upper track. Maximum leaf weight 150kgs Variant sliding stacking door system. Multi track sliding door system, allowing doors to stack at one end, or altenately pass each other. Maximum leaf weight 100/120kgs Invisible Connection It is an innovative hardware system for frameless glass folding doors exclusively equipped with patch fittings. The system hangs and slides in a top mounted track and the wings are aligned in a ʻUʼ brass profile hidden in the floor. All the hardware is available only in aluminium and its finishes. Tubo heavy duty point fixed pivoting door system Heavy duty pivoting door system. Suitable for glass 10mm, 12mm, 15mm & 17.52mm thick Maximum width 1500mm Maximum weight 125kgs Maximum size of each wing is 1000 x 3000mm. 84

85 Hydraulic Patch Fitting 85

86 Wincas The Wincas Computerised Estimating Programme The Wincas Computerised Estimating Programme is available to all AHD customers FREE of charge. The system enables speedy estimating of tempered glass entrances, internal glass doors and screens. Provides print outs of all fittings, glass sizes and cut out details. Full operating instructions and helpline are available. Phone for the latest version 4. Free Computer Estimating System for Toughened Glass Entrance Systems Cuts estimating time from hours to minutes On screen scale layouts Fitting and glass prices can be printed out Can be used on site with laptop computer User friendly Over 2500 types of fittings 6 super finishes 3 day turnaround on door rails Free delivery 250,000 doors a year made with this system 86