ELEVATOR DOORS AUTOMATIC ELEVATOR DOOR MARATHON 200 ELEVATOR CABINS MODERNIZATION SAFETY COMPONENTS

Transcription

1 ELEVATOR DOORS ELEVATOR CABINS MODERNIZATION SAFETY COMPONENTS AUTOMATIC ELEVATOR DOOR MARAON 0 fire-protec on, glass, modernisa on, industrial design high performance doors doors protected against vandalism according to EN81-71 door drives LDO AC 4.0 and LDO AC 4.5

2 DOOR SERIES MARAON 0 Quality for sure elevator doors Marathon 0 Elevator doors of type Marathon a long las ng approved, solid door type, which a ains quality and stability through its above-average of raw of materials and also offers customer-orientated solu ons through its various installing possibili es and product variety: assembly at the shaft wall - Portal System 30 (mm installation depth, using in shaft towers or in a concrete shaft) assembly in a niche with advanced portal frame, portal System 55 (100 mm installation depth, using in concrete shaft or glass elevators) Modernisation package variety of standardized and individual solutions of portal frames in steel and/or glass mounting of the cabin door at still existing revolving doors combination of standard door with modernisation door possible TYPE APPROVAL TESTED Product variety in detail: different special designs (on request): e.g. extension of portal frames also available as glass portal, coverings of the mechanics, frames and door panels at the shaft side reinforced aluminum and canted stainless steel sills for charges up to 1000 kg as well as heavy load sills zinced or stainless steel up to 5000 kg wheel load stainless steel sill with a hidden door panel guidance cabin door with reduced cross bar height for installation in low shaft heights as 2PSO/2PCO/2PCOslim standard landing door with reduced cross bar height for small floor distances or mounting in a niche apron zinced or stainless steel 2PSO = 2 panels side opening, 2PCO = 2 panels central opening, 4PCO = 4 panels central opening supervision of emergency interlock sill heating mechanical cabin door lock design of shaft door in IP54 stainless steel door panels covered or in solid matter light grid with adapter kit standard slide block, comfort slide block and heavy load guides special design according to specific requirements of customer logo and labeling of glass doors optionally possible: sandblasted with anti-fingermark, painted on glass, glued with foil at the rear side of glass colored glass or colored foil between the glass panels cabin doors with mechanical unlock device of folding door modernisation door 2PSO/2PCO/4PCO slim cabin door 2PSO (65mm sill incl. cabin entry)

3 The Marathon 0 doors are characterized by the following quality features: solid design, robust construction of the cross bar only 1 door drive will be needed also at very high and heavy doors long service-life because of high-quality material low attrition door systems for passenger and freight elevator different fields of application possible quite running because of tooth belt drive solid aluminum slide rail profile and high definition pulleys easy to assemble and initial operation through factory-setting pre-adjustment design of Marathon doors according to the Directives EN81-/50, EN81-71, EN81-72, DIN18091, EN81-58 E and EI60 (steel plate doors), EN81-58 E with portal extensions, TÜV controlled and supervised type-examination tested, CE-marking, EG declaration of conformity Design of aluminum sills with additional profile 30/35mm Heavy load sill with additional sill Stainless steel sill with additional sill Door types in different designs and surface designs steel doors primed, powder coated or rather painted in different RAL colors, stainless steel designs in different designs glass doors with circular frame or glass door panels held above/below door panels with glass inserts or bull s-eye Door types in various door widths and heights one side opening 2 or 3 panels (2PSO, 3PSO) telescopic doors central opening 2, 4 or 6 panels (2PCO, 4PCO, 6PCO) doors

4 DOOR SERIES MARAON 0 Automa c elevator doors Marathon 0 // s Portal system 55 2PSO, 2PCO, 4PCO Portal system 30 2PSO, 2PCO, 4PCO Portal System 55 2PCO slim Portal system 30 2PCO slim Portal system 55 3PSO, 6PCO Portal system 30 3PSO, 6PCO Modernisation 2PSO, 2PCO, 4PCO Portal system 55 with reduced cross bar height 2PSO Portal system 30 with reduced cross bar height 2PSO design type Marathon 0 fire protec on cer fica on / available sizes available door widths in mm available door heights in mm min. max. min. max. 2PSO l/r DIN acc. directive EN81-58 E (EI60: on demand): dw mm - dh mm * 3PSO l/r DIN acc. directive EN81-58 E and EI60: dw600 - dh2300mm, dw mm - dh mm * door panels primed or stainless steel 2PCO/ 2PCO slim 4PCO DIN acc. directive EN81-58 E (EI60: on demand): dw700mm - dw1400mm dh00mm - dh2500mm DIN acc. directive EN81-58 E (EI60: on demand): dw mm - dh mm, dw mm - dh mm, dw mm - dh mm * *² * 6PCO DIN acc. directive EN81-58 E (EI60: on demand): dw0-1300mm - dh mm, dw mm - dh mm, dw mm - dh00-20mm, dw mm - dh mm *² * modernisa on door steel plate door panel primed or stainless steel 2PSO l/r DIN acc. directive * 2PCO DIN acc. directive * 4PCO DIN acc. directive * * door height depending on door width, dw = door width, dh = door height, * 2 further door widths and heights on demand

5 Automa c elevator doors Marathon 0 // s min min 100 min 145 min bei LDO AC bei LDO AC / 422 (TB abhängig) 500 bei LDO AC bei LDO AC PSO/2PCO 2PCO slim 4PCO 3PSO/6PCO min 110 min The cabin and landing doors are compatible with each other MOD 2PSO/2PCO MOD 4PCO slim cabin door 2PSO design type Marathon 0 available door widths in mm available door heights in mm min. max. min. max. 2PSO l/r * 2PCO * glass door panels all side framed 3PSO l/r * 4PCO *² * 6PCO *² * 2PSO l/r * glass door panels held above and below 2PCO/ 2PCO slim * 4PCO *² * Glass doors have no fire-proof certification!, * door heights depending on door width, * 2 further door widths and heights on demand

6 D O O R S E R I E S M A R AT H O N Doors for industrial use // s and cabin doors door for industrial use (sample) reinforced sliding carriage with adapted retaining device at the safety rail heavy load guidance for industrial use hanging device of door panel, sample of door for industrial use door for industrial use (sample) heavy load sill with additional sill SLS guide for industrial use the following characteristics can be chosen separately depending on customers demand: reinforced standard door panels with additional stiffenings or special door panels in 1,5 or 2 mm sheet plate thickness door frame with 2 mm sheet plate thickness heavy load sill guidances below reinforced sliding carriages + slide rail thicker material of the cross bar/header, additional continuous fastening angles above and below reinforced lateral pieces heavy load sill in solid material for wheel load up to 2,5 to (5 tons) in galvanized material or stainless steel solid material stainless steel door panels, also in reinforced design 3rd door panel fixation above and 3rd door panel guidance below (depending on door width) higher quantity of idle pulleys (depending on door width)

7 Elevator doors Marathon 0 - High Performance design for sophis cated and high frequented elevator installa ons HIGH PERFORMANCE DOORS Op onal design High Performance // separately choosable Marathon 0 special idle pulleys and special suppor ng pulleys with special ball-bearing with inner pulley diameter = 57 mm sheet metal thickness of door panels = 1.5 mm, also in stainless steel, up to 3 s ffenings in door panel (depending on door width) up to 4 pcs. door guidances below per door panel incl. special slide blocks rubber profile at the closing edge reinforced aluminium sill con nuous below fastening angle closing weight as closing mechanism door panel with brushes at sill area below Marathon special idle pulleys and special suppor ng pulleys with special ball-bearing with inner pulley diameter = 57 mm sheet metal thickness of door panels = 1.5 mm, also in stainless steel, up to 3 s ffenings in door panel (depending on door width) up to 4 pcs. door guidances below per door panel incl. special slide blocks rubber profile at the closing edge reinforced aluminium sill con nuous below fastening angle frequency controlled door drive unit with a gearless brushless motor (driving force on demand) special sound absorp on in door panels

8 DOORS PROTECTED AGAINST VANDALISM ACCORDING TO EN81-71 Elevator doors according to EN safety precau ons against vandalism As a part of the li standard introduced in 05 to protect against vandalism, buildings and elevators will be based on their usage and the expected wanton destruc on divided into three categories: 0 = rare and slight damage like it is possible in every building (office, hotel, mall) 1 = be mes and measured vandalism (hotels in cri cal districts, office with many visitors) 2 = heavy vandalism / robust accomplishment is claimed (every public building in cri cal districts, event halls) As a long las ng experienced door expert, the ETG Elevator Trading GmbH reacted on these accomplishments and can provide the cer fied door type Marathon in all categories. TYPE APPROVAL TESTED E reinforced sliding carriages with adapted retaining device at the safety rail adapted retaining device at the sliding carriage to the cross bar in case of breakdown of the upper guide massive door panel fastening above Categories 0 and 1 adapted retaining device in case of breakdown of the upper guiding reinforced sliding carriage, massive upper door panel fastening and reinforced lower door panel guide changed door panel construc on to abolish the impact energy door panel size 1,5mm with addi onal s ffening doors fulfil fire protec on demand according to EN81-58 reinforced sliding carriage, massive upper door panel fastening and reinforced lower door panel guide door panel size 1,5mm with addi onal s ffening special door panel construc on to abolish the impact energy reinforced door panel guide below (in categories 0,1 and 2) SLS guide reinforced door panel stiffening and reinforced door panel guide (category 2)

9 Elevator doors according to DIN EN // 2 panel one side opening landing and cabin door Landing and cabin door 2PSO EN81-71 Categorie 2 min min ,5 x door width labyrinth cabin height cabin roof cabin depth door 1 height labyrinth door width 1,5 x door width Categorie 2 same basical construc on as categories 0 and 1 covering of crossbar to protect the mechanic electrical protec on of the emergency device door panel size 2,0 mm with edging for grip protec on closing edge with labyrinth door frames, door panels and sills in stainless steel (AISI 304) doors fulfil fire protec on demand according to EN pendulum impact test requirements completely fulfilled H frame slice to be tested impactor floor area related to the slice to be tested H = drop height same basical construc on as categories 0 and 1 covering of cross bar to protect the mechanic door panel size 2,0 mm with edging for grip protec on closing edge with labyrinth door panels and sills out of stainless steel frame at closing edge as a part of the cabin door with cabin door interlock available door widths according to EN in categories 0, 1 and 2 incl. EN81-58 type door width (mm) 2PSO (2-panel side opening) PSO (3-panel side opening) PCO (2-panel central opening) PCO (4-panel central opening) PCO (6-panel central opening) door heights 00mm und 2100mm (further door widths and heights on demand)

10 DOOR DRIVES LDO AC 4.0 AND LDO AC 4.5 Door drives LDO AC 4.0 and LDO AC 4.5 Features and advantages of LDO AC 4.0 and LDO AC 4.5 gearless drive unit, consisting of brushless synchronous motor with a specially adapted, frequency-controlled control system, ensuring extremely efficient operation regulated control system with opening, closing, pushing, reversing, emergency release and light curtain entrance functions door control systems use automatically an optimised motion profile depending on door width estimation, thanks to an automatic door panel mass estimation unit door panel position and speed are monitored readiness indication as a LED parameters of basic door configuration are set during door width estimation: 1. Is the door opening to one side or centric? 2. Should glass panel characteristics be included? 3. Is a cabin door lock used? 4. Which signal should be processed in the case of a control system power outage? automatic door width estimation automatic coder and motor rotation direction identification incremental motor integrated with the motor with 1024 pulses/rotation 3 potential-free outputs for position and status evaluation by the lift control system Specifics start-up and control are possible without additional elements drive systems guarantee stable rotation speed and torque during operation, as well as enable extraordinary dynamic and speed symmetric motor design allowing simple installation in right- and left-operated variants smart obstacle memory protects mechanical elements during repeated door closing error indications using 2 blinking LEDs the door drive may be controlled directly or using a lift control relay light curtain inputs are provided HTD 16 5M LDO AC for standard doors and small glass doors with up to 0 kg moving mass Motor - rated voltage: 230V / rated power: 105W

11 Service function professional optimisation of the motion profile via a WLAN interface, a mobile phone, a tablet PC or a laptop Parameter setup thanks to a legible and intuitive menu system Parameter settings available for opening and closing motions: 1. Change of opening and closing speed along 4 sections 2. Setting of acceleration and deceleration ramps 3. Variable travel setting at end positions 4. Very fine adjustments of the closing force 5. Holding force at end positions language may be selected using the service menu explanations of parameters are included in the menu full overview of currently set parameter values simple software update using the Software update menu element M8 x 14 HTD 28 5M LDO AC for heavy doors, glass doors and industrial doors with moving mass up to 400 kg Motor - rated voltage: 230 V / rated power: <132 W

12 Rackwitz ETG Kömmlitzer Straße 5 D Rackwitz Phone: Fax: info@elevator-trading.de Internet: Subject to change. / Design: 17 Full-Service Werbeagentur siriusmedia GmbH,