Flat Products. Check our website for the latest technical information.

Size: px
Start display at page:

Download "Flat Products. Check our website for the latest technical information."

Transcription

1 Flat Products Check our website for the latest technical information.

2 BE OF CONENS Introduction Gibs Bronze-Plated, Inch... 4 V-Gibs Bronze-Plated, Inch Gibs Solid-Bronze, Self-ubricating, Inch Gibs Solid-Bronze, Self-ubricating, Metric... 7 Square Gibs... 8 Gib ssemblies... 9 Base Plates for Gib ssemblies...10 Optional -Slide for Gib ssemblies Gibs for Gib ssemblies...12 ear Strip ays, Self-ubricating...13 ear Strips, Bronze-Plated, Inch...14 ear Strips, Bronze-Plated, Metric...16 Side Strips, Bronze-Plated, Inch and Metric...17 ear Strips, Solid-Bronze, Self-ubricating, Inch - Fixed ength utomotive ear Plates VI Metric...20 utomovice ear Plate Conversions...22 NMS Metric...24 Guide Blocks Corner...27 Inch...28 Metric...30 Keeper Blocks Inch, ight uty...32 Inch, Medium uty...34 Inch, Heavy uty...36 Metric, 6mm...38 Metric, 13mm...39 U & V Blocks, NMS...40 Center Keys & Guides

3 amina, Inc. began as a lamination die manufacturer in uring the years from 1938 to the present amina has evolved into a manufacturer and distributor of die and mold components. Even though we no longer make dies, we do understand the die and mold maker s needs and objectives. e have made it our business to supply quality products in a timely manner at a reasonable price. e know how to compete in the marketplace and supply you with the products you need when you need them. a wider selection of wear and guiding products than in the past. It is our purpose to help you become more productive by helping to eliminate your downtime. ith the products in stock, we will become your one-stop supplier and deliver the products you require each and every day. Our catalog is presented in an easy-to-read format that will display the selection of products you need without a lot of extra data. ith the introduction of this catalog featuring sliding guide components for molds, machinery and dies, we bring you BRONZE-PE ER SRIPS & GIBS Bronze-Plated ear Strips & Gibs are made from low carbon extra-fine grain steel electroplated with a bronze alloy consisting of approximately 89% copper and 11% tin. he hardness is 180 BHn minimum. amina Bronze Plating has a natural lubricity and is ideal when used against hardened steel. e recommend any good grade of light machine oil suitable for machine way applications to extend the life of the wear surface. he thickness of the bronze is.008 to.010. By using this thickness the bronze does not funnel out under heavy loads. he strength of steel backing keeps surface distortion to a minimum. Because most precision tool slide applications require either reworking or replacement if they develop so much as a.003 wear, amina Bronze thickness is more than adequate. he superior wear properties of amina Bronze is not affected in working temperatures up to 400 F. Precision Machining on -Gibs Precision ground sliding surface on wearstrips Close tolerances Consistent quality control ow Friction: Co-efficient of friction.2518 oad factor 2700 PSI No galling or snow balling Magnetic - can be held on magnetic chuck Non-abrasive Non Seizing BRONZE SEF-UBRICING ER SRIPS N GIBS Bronze Self-ubricating wear strips and gibs are made from bronze with self-lubricating graphite plugs. hese products can be used in applications up to 450 F (232 C). Bronze is a strong material that resists wear, abrasion and deformation under high compressive loads. Oil-impregnated graphite plugs cover 25-30% of the wear surface, providing a self-lubricating film of graphite on the wear surface. pplying a film or mist of light machine oil on new selflubricating parts before use, will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.) Precision machining on -Gibs Self ubricating Precision ground wear surfaces on wearstrips Close tolerances Consistent quality control Resists abrasion Excellent wear characteristics e would also like to remind you that these parts run best and last longest in a clean environment. 3

4 -Gibs Inch Bronze-Plated Steel ith and without graphite plugs F Start G yp. rilled & Counterbored Holes See S C E yp. B Plated Surfaces 4 Standard -Gibs with and without mounting holes Self-ubricating -Gibs with and without mounting holes PR -GIBS INCH BRONZE-PE PIN & SEF-UBRICING PR (Self-ubricating) N/ 5.25 GH B C E F G S G.005 ±.005 Qty Size N/ S NH S-4-6-NH 8.75 NO MOUNING HOES N/ N/ S NH S-5-8-NH NO MOUNING HOES N/ N/ S NH S-7-10-NH NO MOUNING HOES N/ 9.00 Hole ocation ±.005 Unless noted, all dimensions ± N/ S NH S NH NO MOUNING HOES N/ S NH S NH NO MOUNING HOES N/ S NH S NH NO MOUNING HOES N/ S NH S NH NO MOUNING HOES /4 5/16 3/8 3/8 1/2 5/8 5/8

5 V-Gibs Inch Use amina V-Gibs and ear Strips right from stock to create assemblies. Start E yp. 60 ø.5000 Roll Pin iameter Bronze-Plated Steel Ref. F B Roll im. Only amina stocks standard V-Gibs PR V Ref. H.005 V-GIBS BRONZE PE F Base idth.001 B Roll im..001 C E S.005 No. Holes V V V V V V V V V C yp. rilled & Counterbored Holes See S V V V V V V V V V /4 H Hole location ±.005 Unless noted, all dimensions ± Size 1/4 5/16 3/8 3/8 1/2 5/8 5/8 amina Bronze electroplated on steel has achieved universal acceptance for wear applications. he amina principle of using bronze for wear surfaces and steel for strength is seen on many products throughout the amina product line. Plating thickness: One-piece construction with pre-drilled and counterbored screw holes, machined complete. 5

6 -Gib Inch Plastics Injection Molds Special Machines Press Gibbing Special Slide pplications F Start G yp. rilled & Counterbored Holes See S C Bronze with Self-ubricating Graphite Plugs E yp. B 6 For -Gibs without mounting holes use N at the end of the part number. Unless noted, all dimensions ±.010 PR 2G42G GIBS INCH SOI BRONZE SEF-UBRICING.005 GH B G C.005 E F G M ±.005 No. Holes Size 2G56G G70G G48G G64G G80G G48G G60G G80G G100G G48G G72G G96G G120G G64G G96G G128G G96G G144G G192G G96G G144G G192G /4 5/16 3/8 3/8 1/2 5/8 5/8

7 -Gib Metric Plastics Injection Molds Special Machines Press Gibbing Special Slide pplications rilled & Counterbored Holes See S F Start G yp. H J K C Bronze with Self-ubricating Graphite Plugs Precision machined sliding surfaces E yp. rill through for M10 Screw (See M ) -GIBS MERIC SOI BRONZE SEF-UBRICING PR B GH G C F G H J K QUNIY E ±0.127 M S 15G100G G150G G200G G250G G200G G250G G300G G350G Unless noted, all dimensions ±0.25mm M & S Size M10 B he variety of sizes offered make custom gib and slide assembly construction fast and easy. uring normal sliding action, graphite produces a lubricating film across the entire wear surface. It is recommended that a mist of light oil be wiped on sliding surface prior to assembly. One piece construction with pre-drilled and counterbored screw holes, machined complete. amina off-the-shelf -Gibs and ear Strips can be put together to make your own custom assemblies.. 7

8 Square Gibs Bronze with Self-ubricating Graphite Plugs Start B yp. rilled & Counterbored holes See S R 1.00 M yp. Unless noted, all imensions ±.010 SQURE GIBS BRONZE SEF-UBRICING PR B M S ±.005 ±.005 No. Holes Size 6SG32G SG40G SG48G SG64G SG80G SG96G SG96NG NO MOUNING HOES 8SG32G SG40G SG48G SG64G SG80G SG96G SG96NG NO MOUNING HOES 12SG64G SG80G SG96G SG96NG NO MOUNING HOES /8 3/8 5/8 Create custom gib assemblies using amina component parts. 8

9 Gib ssemblies Inch Plastics Injection Molds Special Machines Special Slide pplications Bronze with Self-ubricating Graphite Plugs Product Features he gib assembly includes four components: two -gibs, a base plate, and an optional -slide. he -gibs are provided with screw holes and are spot drilled for dowels. lso, the base plate includes thru holes to allow for easy assembly and fit into a pre-machined pocket. he gib assembly is a proven performer in a wide variety of applications, including lifter slides in molds. NOE: Refer to page 11 for -Slide dimensional information. SSY. IH -SIE PR SSY. IHOU -SIE PR 2G16GS 2G16G GIB SSEMBIES INCH B C1 E H 2G24GS 2G24G G32GS 2G32G G24GS 3G24G G32GS 3G32G G40GS 3G40G G24GS 4G24G G32GS 4G32G G40GS 4G40G G48GS 4G48G G32GS 6G32G G40GS 6G40G G48GS 6G48G No. Holes Socket Head Cap Screws Size ocating owel Pins No. Holes Size 1/4-20x1-1/4 4 1/4 x 1-1/2 5/16-18x1-1/2 4 1/4 x1-1/2 5/16-18x1-1/2 4 1/4 x1-1/2 5/16-18x1-3/4 4 1/4 x1-3/4 9

10 Base Plates for Gib ssemblies NOE: See page 9 for complete assembly. Bronze with Self-ubricating Graphite Plugs B C 26 X 45 G H F F E G H I J S Holes E I J 2GB16G Hole ocations 10 hickness =.375 Unless noted, all dimensions ±.010 PR 2GB16G B C GIB SSEMBY BSE PES E F G H I J S ±.005 NO. SIZE GB24G GB32G GB24G GB32G GB40G GB24G GB32G GB40G GB48G GB32G GB40G GB48G /4 5/16 5/16 5/16

11 Optional -Slide for Gib ssemblies Inch High quality carburized steel NOE: See page 9 for complete assembly. Product Features he inch-sized -Slide is often used as a ifter Slide and can be purchased separately or as a part of the gib assembly. -SIE FOR GIB SSEMBIES INCH Part idth B C C/2 Height Number (in) (in) (in) (in) H (in) 2GSIE GSIE GSIE GSIE

12 -Gibs for Gib ssemblies NOE: See page 9 for complete assembly. Bronze with Self-ubricating Graphite Plugs rilled & Counterbored holes See S.380 F G H.26 x 45 yp. C E B J K Spot drill for owel Pin (2) holes 12 Precision machined sliding surface Unless noted, all dimensions ±.010 PR 2G16G GH B G GIB SSEMBY -GIBS C E F G H J K ±.005 NO. SIZE G24G G32G G24G G32G G40G G24G G32G G40G G48G G32G G40G G48G S 1/4 5/16

13 ear Strip ays Solid Bronze Graphite Plugs 40 Bronze with Self-ubricating Graphite Plugs Call amina Customer Service for hole pattern. PR NG ER SRIP YS ±.001 PUG I / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG / NG /2 13

14 ear Strips Bronze Plated amina bronze-plated wear strips are offered cut to your exact length or in 48 lengths. BRONZE PE PR by the inch FP-1/8-x-1 PR 48 length PPF hickness.002 ER SRIPS INCH BRONZE-PE idth.080 BRONZE PE PR by the inch PR 48 length 1 FP-5/16-x-1 PPF hickness.002 idth.080 BRONZE PE PR by the inch PR 48 length 1 FP-5/8-x-1 PPF FP-1/8-x-1-1/4 PPF /4 FP-5/16-x-1-1/4 PPF /4 FP-5/8-x-1-1/4 PPF /4 FP-1/8-x-1-1/2 PPF /2 FP-5/16-x-1-1/2 PPF /2 FP-5/8-x-1-1/2 PPF /2 FP-1/8-x-1-3/4 PPF /4 FP-5/16-x-1-3/4 PPF /4 FP-5/8-x-1-3/4 PPF /4 FP-1/8-x-2-1/2 PPF /2 FP-5/16-x-2-1/2 PPF /2 FP-5/8-x-2-1/2 PPF /2 1/8 FP-1/8-x-3 PPF FP-5/16-x-3 PPF FP-5/8-x-3 PPF FP-1/8-x-3-1/2 PPF /2 FP-5/16-x-3-1/2 PPF /16 3-1/2 FP-5/8-x-3-1/2 PPF /8 3-1/2 hickness.002 FP-1/8-x-2 PPF FP-5/16-x-2 PPF FP-5/8-x-2 PPF FP-1/8-x-4 PPF FP-5/16-x-4 PPF FP-5/8-x-4 PPF FP-1/8-x-4-1/2 PPF /2 FP-5/16-x-4-1/2 PPF /2 FP-5/8-x-4-1/2 PPF /2 FP-1/8-x-5 PPF FP-5/16-x-5 PPF FP-5/8-x-5 PPF FP-1/8-x-6 PPF FP-5/16-x-6 PPF FP-5/8-x-6 PPF FP-3/16-x-1 PPF FP-5/16-x-8 PPF FP-5/8-x-8 PPF FP-3/16-x-1-1/4 PPF /4 FP-5/16-x-10 PPF FP-5/8-x-10 PPF FP-3/16-x-1-1/2 PPF /2 FP-5/16-x-12 PPF FP-5/8-x-12 PPF FP-3/16-x-1-3/4 PPF /4 FP-3/8-x-1 PPF FP-3/4-x-1 PPF FP-3/16-x-2 PPF FP-3/8-x-1-1/4 PPF /4 FP-3/4-x-1-1/4 PPF /4 FP-3/16-x-2-1/2 PPF /2 FP-3/8-x-1-1/2 PPF /2 FP-3/4-x-1-1/2 PPF /2 FP-3/16-x-3 PPF /16 3 FP-3/8-x-1-3/4 PPF /4 FP-3/4-x-1-3/4 PPF /4 FP-3/16-x-3-1/2 PPF /2 FP-3/8-x-2 PPF FP-3/4-x-2 PPF FP-3/16-x-4 PPF FP-3/8-x-2-1/2 PPF /2 FP-3/4-x-2-1/2 PPF /2 FP-3/16-x-4-1/2 PPF /2 FP-3/8-x-3 PPF FP-3/4-x-3 PPF FP-3/16-x-5 PPF FP-3/8-x-3-1/2 PPF /8 3-1/2 FP-3/4-x-3-1/2 PPF /4 3-1/2 FP-3/16-x-6 PPF FP-3/8-x-4 PPF FP-3/4-x-4 PPF FP-3/16-x-8 PPF FP-3/8-x-4-1/2 PPF /2 FP-3/4-x-4-1/2 PPF /2 FP-1/4-x-1 PPF FP-3/8-x-5 PPF FP-3/4-x-5 PPF FP-1/4-x-1-1/4 PPF /4 FP-3/8-x-6 PPF FP-3/4-x-6 PPF FP-1/4-x-1-1/2 PPF /2 FP-3/8-x-8 PPF FP-3/4-x-8 PPF FP-1/4-x-1-3/4 PPF /4 FP-3/8-x-10 PPF FP-3/4-x-10 PPF FP-1/4-x-2 PPF FP-3/8-x-12 PPF FP-3/4-x-12 PPF FP-1/4-x-2-1/2 PPF /2 FP-1/2-x-1 PPF FP-1-x-1 PPF FP-1/4-x-3 PPF FP-1/2-x-1-1/4 PPF /4 FP-1-x-1-1/4 PPF /4 FP-1/4-x-3-1/2 PPF /4 3-1/2 FP-1/2-x-1-1/2 PPF /2 FP-1-x-1-1/2 PPF /2 FP-1/4-x-4 PPF FP-1/2-x-1-3/4 PPF /4 FP-1-x-1-3/4 PPF /4 FP-1/4-x-4-1/2 PPF /2 FP-1/2-x-2 PPF FP-1-x-2 PPF FP-1/4-x-5 PPF FP-1/2-x-2-1/2 PPF /2 FP-1-x-2-1/2 PPF /2 FP-1/4-x-6 PPF FP-1/2-x-3 PPF FP-1-x-3 PPF FP-1/4-x-8 PPF FP-1/2-x-3-1/2 PPF /2 3-1/2 FP-1-x-3-1/2 PPF /2 FP-1/4-x-10 PPF FP-1/2-x-4 PPF FP-1-x-4 PPF FP-1/4-x-12 PPF FP-1/2-x-4-1/2 PPF /2 FP-1-x-4-1/2 PPF /2 FP-1/2-x-5 PPF FP-1-x-5 PPF FP-1/2-x-6 PPF FP-1-x-6 PPF FP-1/2-x-8 PPF FP-1-x-8 PPF FP-1/2-x-10 PPF FP-1-x-10 PPF FP-1/2-x-12 PPF FP-1-x-12 PPF Create custom assemblies using standard amina component parts. idth

15 ear Strips Bronze-Plated Standard wear strips are plated on one side only. Up to four sides can be plated. Please call for quotation. PIN SEF-UBRICING PR ER SRIPS INCH BRONZE-PE SEF-UBRICING hickness.002 idth PR hickness idth PR By the inch 48 length By the inch 48 length By the inch 48 length SFP Maximum length 48 Maximum length 48 In order to be flat this material must be fastened to a flat surface. Parallel.001 within 4 Machining may cause distortion which can result in the loss of flatness of the part. hickness of bronze:.008 to.010 Once altered, amina will not replace wear strips. e can provide specials at a Milled edges reasonable price. Send your prints to sales@lamina.com ear Strips Bronze-Plated & Self-ubricating SF SFP SF SFP SF SFP SF /2 SFP SF /2 SFP SF /2 SFP SF /2 SFP SF /2 SFP SF /2 1/4 1/2 1 SFP SF SFP SF SFP SF hickness.002 SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF SFP SF /2 SFP SF /2 SFP SF SFP SF SFP SF /2 SFP SF /2 3/8 3/4 SFP SF SFP SF SFP SF SFP SF SFP SF SF SF SF SF SFP SF idth hese products are in stock at amina and at amina stocking distributors throughout the world. amina bronze-plated self-lubricating wear strips are offered cut to your length or in 48 lengths. e suggest cutting these strips in 1/2 increments to avoid cutting through the plugs. 15

16 ear Strips Bronze-Plated FP Metric Standard wear strips are plated on one side only. Up to four sides can be plated, please call for a quotation. Maximum length 1219 mm In order to be flat this material must be fastened to a flat surface. Parallel within 1219mm hickness of bronze: 0.20 to 0.25 Milled edges Machining may cause distortion which can result in the loss of flatness of the part. Once altered, amina will not replace wear strips. e can provide specials at a reasonable price. Send your prints to sales@lamina.com 16 BRONZE PE PR by 25mm FP-4MM-X-25 PR 1219mm length MFP04025 hickness ER SRIPS MERIC BRONZE-PE idth BRONZE PE PR by 25mm PR 1219mm length 25mm FP-10MM-X-25 MFP10025 hickness idth BRONZE PE PR by 25mm PR 1219mm length 25mm FP-20MM-X-30 MFP20030 hickness idth FP-4MM-X-30 MFP mm FP-10MM-X-30 MFP mm FP-20MM-X-50 MFP mm FP-4MM-X-35 FMP mm FP-10MM-X-35 MFP mm FP-20MM-X-60 MFP mm 60mm 4mm FP-4MM-X-40 MFP mm FP-10MM-X-40 MFP mm FP-20MM-X-75 MFP mm FP-4MM-X-60 MFP mm FP-10MM-X-50 MFP mm FP-20MM-X-100 MFP mm 10mm FP-4MM-X-100 MFP mm FP-10MM-X-60 MFP mm FP-25MM-X-25 MFP mm 25mm FP-5MM-X-25 MFP05025 FP-5MM-X-40 MFP mm 40mm FP-10MM-X-125 MFP mm 30mm 25mm FP-10MM-X-75 MFP mm FP-25MM-X-100 MFP mm FP-5MM-X-30 MFP mm FP-10MM-X-100 MFP mm FP-5MM-X-75 MFP mm FP-10MM-X-150 MFP mm FP-5MM-X-100 MFP mm FP-12MM-X-50 MFP12050 FP-6MM-X-25 MFP mm 25mm FP-12MM-X-75 MFP mm FP-6MM-X-30 MFP mm FP-12MM-X-100 MFP mm 12mm FP-6MM-X-35 MFP mm FP-12MM-X-125 MFP mm FP-6MM-X-40 MFP mm 40mm FP-12MM-X-150 MFP mm FP-6MM-X-50 MFP mm FP-12MM-X-200 MFP mm FP-6MM-X-60 MFP mm FP-15MM-X-25 MFP mm FP-6MM-X-75 MFP mm FP-15MM-X-40 MFP mm FP-8MM-X-25 MFP mm FP-15MM-X-60 MFP mm FP-8MM-X-60 MFP mm FP-15MM-X-75 MFP mm 75mm FP-8MM-X-75 MFP mm 75mm FP-15MM-X-100 MFP mm FP-8MM-X-100 MPF mm FP-15MM-X-125 MFP mm FP-8MM-X-125 MFP mm FP-15MM-X-150 MFP mm amina is the only manufacturer of bronze-plated wear strips.

17 Side Strip Bronze-Plated SP Inch & Metric NOE: Maximum length is 48 (1219mm). PR by 25mm SIE SRIP MERIC BRONZE-PE PR 1219mm length hickness idth SP-15MM-X-25MM MSP SP-25MM-X-37MM MSP SIE SRIP INCH BRONZE-PE PR by the Inch PR 48 length HICK- NESS IH SP-1/2-X-1 SPF /2 1 SP-1/2-X-1-1/2 SPF /2 SP-5/8-X-1 SPF /8 1 SP-5/8-X-2 SPF SP-3/4-X-1 SPF SP-3/4-X-1-1/2 SPF /4 1-1/2 SP-3/4-X-2 SPF SP-1-X-1-1/2 SPF /2 SP-1-X-2 SPF SP-1-X-3 SPF SP-1-1/4-X-2 SPF /4 2 SP-1-1/4-X-3 SPF SP-1-1/2-X-2 SPF /2 2 SP-1-1/2-X-2-1/2 SPF /2 SP-2-X-2 SPF

18 ear Strips Inch Fixed-ength No suffix for solid bronze G or NG is necessary for ordering self-lubricating See Page ER SRIPS IMPERI PR S (hickness) SCRE HOES HOE OCION 1/4 3/8 1/2 5/8 idth ength M P B C E F G H B C B C B C B C

19 ear Strips Inch Fixed-ength Bronze with Self-ubricating Graphite Plugs Bronze with self-lubricating graphite plugs for bilateral wear Ready to use Solid Bronze available upon request hen ordering please indicate preference at the end of the part number: G rilled with Graphite Example: G NG Undrilled with graphite Example: NG Mounting hole patterns for ear Strips B C E F B C G G Hole Pattern For N Screws H Hole Pattern B Material: Bronze ll imensions ±.010 unless noted RECOMMENE MOUNING SCRE SIZES HICKNESS N 1/4 1/4 Flat head screw 3/8 1/4 Socket head cap screw 1/2 5/16 Socket head cap screw 5/8 5/16 Socket head cap screw G H B C E F Hole Pattern C NOE: idth and length of wearstrip determines hole pattern, regardless of thickness. 19

20 ear Plates NMS Style 05, 06 & 07/VI 3357 Metric Steel Bronze - Self ubricating Steel - Self-ubricating Product Features hese wear plates are 20mm thick and available in bronze material with graphite, steel with graphite and plain steel. hey are also available in the GM sizes in cast iron with graphite. vdi/naams standards idth (mm) ength (mm) Bronze w/graphite Plugs Steel w/graphite Plugs Steel Plain Mounting Hole Pattern & ocation Hole Hole B C E Part Number Part Number Part Number Qty. Pattern (mm) (mm) (mm) (mm) (mm) 80 VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX B VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX B VY VG VX B VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX B VY VG VX C VY VG VX C

21 ear Plates NMS Series 05, 06 & 07/VI 3357 Metric MERIS: Self-lubricating wear plates are manufactured from bronze or steel with graphite plugs. he plugs cover 20-25% of the wear surface. ear plates are also available in plain steel. ear plates are also available in the GM sizes in cast iron with graphite. See the cross reference sheet on pg. 23 for the GM part number. additional automotive standards OERNCES: hickness Mounting hole locations Flatness Unless otherwise noted MOUNING SCRES: M8 S.H.C.S. for part numbers VY and VY ± 0.00/ mm ± 0.2 mm ± mm ± 0.25 mm M12 S.H.C.S. for all other part numbers. idth ength Bronze Steel Steel Mounting Hole Pattern & ocation w/graphite Plugs w/graphite Plugs Plain Hole Hole B C E (mm) (mm) Part Number Part Number Part Number Qty. Pattern (mm) (mm) (mm) (mm) (mm) X Y* X G* X X* Y* X* 4 C X Y* X G* X X* * * 4 C X Y* X G* X X* 3 B Y* X* 4 C X Y* X G* X X* 3 B Y* G* 4 C X Y* X G* X X* 3 B Y* X* 4 C Y* X* 4 C Y* X* 4 C Y* X* 4 C Y* X* 4 C PESE NOE: hese wear plates have hole patterns that differ from our standard VI/NMS wear plates. hey must be ordered using the GM or Ford part number to receive the correct mounting hole locations. 21

22 utomotive ear Plate Conversions imensions BRONZE IH GRPHIE PUGS SEE IH GRPHIE PUGS nchor amina NMS 07 Chrysler Ford Part Number General Motors nchor amina NMS 05 Ford idth ength Part Number Series Number Part Number Part Number Part Number Part Number Series Number Part Number VY VG VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY VG VY VG VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY VG VY VG VY Y VG VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y VG X G VY VG VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y VG X G VY VG VY VG VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G VY X Y Y VG X G Y VY X Y VG X G Y Y Y PESE NOE: he highlighted items (in grey) have different hole patterns than our existing wear plates. hey do not convert to a amina part number and must be ordered as highlighted. 22

23 utomotive ear Plate Conversions imensions PIN SEE CS IRON w/grphie PUGS nchor amina NMS 06 Chrysler Ford Part Number General Motors General Motors idth ength Part Number Series Number Part Number Part Number Part Number Part Number VX VX X X X C VX X X X C VX X X X C VX X X X C VX VX VX X X X C VX X X X C VX X X X C VX X X X C VX VX VX X C VX X X X C VX X X X C VX X X X C VX X X X C VX X X X C VX X X X C VX X X VX VX X X X C VX X X X C VX X X X C VX X X X C VX X X X C VX X X X C VX X X VX VX VX X X X C VX X X X C VX X X X C VX X X X C VX X X X C X C VX X X X C X C X C PESE NOE: he highlighted items (in grey) have different hole patterns than our existing wear plates. hey do not convert to a amina part number and must be ordered as highlighted. Cast iron must be ordered using the GM part number. 23

24 ear Plates NMS Series 01, 02 & 03 Metric Steel Self-ubricating Bronze Self-ubricating Steel Product Features he NMS Series of wear plate fully meets the North merican utomotive Standard. hey are 20mm thick and available in plain steel, steel with graphite plugs and bronze with graphite plugs. he bronze and steel with graphite plugs are self-lubricating products and do not require lubrication during production. ll NMS wear plates are supplied with mounting holes to accommodate M12 S.H.C.S. For ease of identification, all products are marked with the part number. Steel ithout Graphite Plugs Part # Steel ith Graphite Plugs Part # Bronze ith Graphite Plugs Part # idth ength

25 ear Plates NMS Series 01, 02 & 03 Metric MERIS: Steel wear plates are manufactured from high quality carburized steel. hey are precision ground and hardened to Rc (1.2 mm to 1.5 mm deep). hey are available with or without graphite plugs. Bronze wear plates are manufactured from bronze material with oil impregnated graphite plugs. hen ordered with graphite plugs, the plugs cover 25-30% of the wear surface and are arranged to generate optimal coverage at any engagement direction of the wear plate. OERNCES: hickness ± mm Mounting hole locations ± 0.25 mm Flatness ± mm Unless otherwise noted ± 0.25 mm MOUNING SCRES: M12 S.H.C.S. recommended. Plate has 13.5mm through hole with 20mm counterbore 13mm deep. idth (mm) ength (mm) Hole Qty. Pattern Mounting Hole Pattern & ocation B C (mm) (mm) (mm) E F (mm) (mm) (mm) G (mm) B B B B B B C B C C

26 ear Plates utomotive Inch Steel Bronze Self-ubricating VIBE FROM SOCK Steel Bronze amina offers a range of wear plate styles and sizes for your selection. NSX SEE NYG BRONZE GRPHIE NOSE IH ER PES INCH E N G H SCRE HOES SCRE HOE OCIONS NO. P. B C E F G H 26 NSX82508 NYG NSX83025 NYG NSX8304 NYG NSX8305 NYG NSX8306 NYG NSX8308 NYG NSX8310 NYG B NSX8312 NYG B NSX84025 NYG NSX8403 NYG NSX8404 NYG NSX8405 NYG NSX8406 NYG NSX8408 NYG B NSX8410 NYG B NSX8412 NYG B NSX85025 NYG NSX8504 NYG NSX8505 NYG NSX8506 NYG NSX8508 NYG B NSX8510 NYG B NSX8512 NYG C NSX8604 NYG B NSX8605 NYG NSX8606 NYG C NSX8608 NYG C NSX8610 NYG NSX8612 NYG NSX8805 NYG NSX8806 NYG C NOES & SPECIFICIONS ll dimensions are ±.010 unless noted. ll screw holes are for 1/2 Soc. Hd. Scr., 9/16 drill through & 13/16 Counterbore x.56 deep. olerances: hickness ±.001 Hole ocation ±.010 Flatness ±.0005 (o not use grease on graphite-plugged surfaces.)

27 Corner Guide Blocks Solid Steel Self-ubricating VIBE FROM SOCK For M16 Soc. Hd. Screw (2) Holes ø16 G6 (2) Holes B H 25 -B- -- C B x 45 Chamfer Surface Harden & Graphite Plug Cross-Hatched areas 32 Break all sharp edges 0.4 x 45 except as shown NOES & SPECIFICIONS Screw hole locations ±0.25 owel hole locations ±0.10 pply a film or mist of light machine oil on new self-lubricating parts before use will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.) PR G G G G G G G G G CORNER GUIE BOCKS MERIC H B C ±0.25 ±0.013 ±0.013 ±

28 Guide Blocks Inch Solid Steel Chromium Steel ISI-4150 or 6150 ear area is surface hardened RC ll Blocks are self-lubricating with graphite oil plugs ll Blocks are precision ground ll olerances not noted are held to ±.010 and are non-cumulative Easily altered if necessary amina logo and part number is etched/stamped on part 28 PR 14G24G 3.00 GUIE BOCKS INCH IH B C # MG. HOES ENGH HEIGH G32G G40G G48G G64G G80G G24G G32G G40G G48G G64G G80G G24G G32G G40G G48G G64G G80G G24G G32G G40G G48G G64G G80G ocation of mounting holes and dowels are tightly held to provide for interchangeability. pply a film or mist of light machine oil on new self-lubricating parts before use will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.)

29 Guide Blocks Inch, continued 1.00 C for 1/2 S.H.C.S Spot rill (farside) for 1/2 dowel 1.00 B C Note: Mounting Hole locations ±.005 3/8-16 ap (2) for Jack Screws (not on 3 part) HOE PERN 3-HOE PERN 1.00 B C H HOE PERN his surface is hardened and has self-lubricating graphite plugs YPIC SECION Guide and Keeper Blocks are used together for guidance and alignment. Keeper Block information starts on page

30 Guide Blocks Metric 45mm ide B C 0.8 J H 0 E F ø12 G6 (2) Holes For M12 S.H.C.S. (N) Holes Graphite Plugs his Surface NOES & SPECIFICIONS: Screw hole locations ±0.25 owel hole locations ±0.10 Material: Steel Cross-hatched areas surface hardened 30 GUIE BOCKS SOI SEE SEF-UBRICING 45mm PR HOES (N) B C E F H J PR HOES (N) B C E F H J G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G pplying a film or mist of light machine oil on new G self-lubricating parts before use will enhance the G self-lubricating properties. G G (o not use grease on graphite-plugged surfaces.) G

31 Guide Blocks Metric 60mm ide B C 0.8 J H 0 E F ø12 G6 (2) Holes For M12 S.H.C.S. (N) Holes Graphite Plugs his Surface NOES & SPECIFICIONS: Screw hole locations ±0.25 owel hole locations ±0.10 Material: Steel Cross-hatched areas surface hardened GUIE BOCKS SOI SEE SEF-UBRICING 60mm PR HOES (N) B C E F H J PR HOES (N) B C E F H J G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G Please check our website for the latest technical information. 31

32 Keeper Blocks ight-uty Solid Steel Chromium Steel ISI-4150 or 6150 ear area is surface hardened RC ll Blocks are self-lubricating with graphite oil plugs ll Blocks are precision ground ll olerances not noted are held to ±.010 and are non-cumulative Easily altered if necessary amina logo and part number is etched/stamped on part pply a film or mist of light machine oil on new self-lubricating parts before use will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.) GENER IMENSIONS C E F ± PR KEEPER BOCKS IGH UY SOI SEE SEF-UBRICING 8K24G 3.00 H J K # MG. PR H J HOES ±.005 ±.001 ±.005 ± K24G K32G K32G K40G K40G K48G K48G K64G K64G K80G K80G K24G K24G K32G K32G K40G K40G K48G K48G K64G K64G K80G K80G K # MG. HOES 2 2

33 Keeper Blocks ight-uty, continued.50 for 1/2 S.H.C.S. for ø17/32 Spot rill.50 E C for 3/8-16 Jack Screw FOR 3 N 4 INCH ENGHS 1.00 C FOR 5 N 6 INCH ENGHS.50 F H K C E FOR 8 O 10 INCH ENGHS.250 ±.005 J YPIC SECION his surface is hardened and has self-lubricating graphite plugs Keeper Block as Side Guide 33

34 Keeper Blocks Medium-uty 34 pply a film or mist of light machine oil on new self-lubricating parts before use will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.) PR KEEPER BOCKS MEIUM UY SOI SEE SEF-UBRICING INCH 8KM24G 3.00 H J K # MG. PR H J HOES ±.005 ±.001 ±.005 ± KM24G KM32G KM32G KM40G KM40G KM48G KM48G KM64G KM64G KM80G KM80G KM24G KM24G KM32G KM32G KM40G KM40G KM48G KM48G KM64G KM64G KM80G KM80G KM24G KM24G KM32G KM32G KM40G KM40G KM48G KM48G KM64G KM64G KM80G KM80G KM24G 3.00 Solid Steel Chromium Steel ISI-4150 or 6150 ear area is surface hardened RC ll Blocks are self-lubricating with graphite oil plugs ll Blocks are precision ground ll olerances not noted are held to ±.010 and are non-cumulative Easily altered if necessary amina logo and part number is etched/stamped on part GENER IMENSIONS C E F G ± KM24G KM32G KM32G KM40G KM40G KM48G KM48G KM64G KM64G KM80G KM80G K # MG. HOES

35 Keeper Blocks Medium-uty, continued C.50 for 1/2 S.H.C.S. H K For 3 Inch ength ø17/32 Spot rill.250 J ±.005 his surface is hardened and has self-lubricating graphite plugs ypical Section.50 E.50 F C.62 C E For 4 to 6 Inch ength For 8 Inch ength.50 F C E G For 10 Inch ength 35

36 Keeper Blocks Heavy-uty Solid Steel Chromium Steel ISI-4150 or 6150 ear area is surface hardened RC ll Blocks are self-lubricating with graphite oil plugs ll Blocks are precision ground ll olerances not noted are held to ±.010 and are non-cumulative Easily altered if necessary amina logo and part number is etched/stamped on part pply a film or mist of light machine oil on new self-lubricating parts before use will enhance the self-lubricating properties. (o not use grease on graphite-plugged surfaces.) GENER IMENSIONS E F G ± PR KEEPER BOCKS HEVY UY SOI SEE SEF-UBRICING INCH 14KH32G 4.00 H J K # MG. PR H J HOES ±.005 ±.001 ±.005 ± KH32G KH40G KH40G KH48G KH48G KH64G KH64G KH80G KH80G KH96G KH96G KH32G KH32G KH40G KH40G KH48G KH48G KH64G KH64G KH80G KH80G KH96G KH96G KH32G KH32G KH40G KH40G KH48G KH48G KH64G KH64G KH80G KH80G KH96G KH96G K # MG. HOES 3 3 3

37 Keeper Blocks Heavy-uty, continued.62 E for 3/8-16 Jack Screw ø21/32 Spot rill.62 F For 4 to 6 Inch ength for 5/8 S.H.C.S E For 8 Inch ength.62 G K H E F For 10 & 12 Inch ength.375 ±.005 J ypical Section - hese surfaces are hardened and have self-lubricating graphite plugs Keeper Blocks help keep the load aligned for a smooth running die operation. SRIPPER P FORMING P 37

38 Keeper Blocks 6mm Solid Steel Chromium Steel ISI-4150 or 6150 ear area is surface hardened RC ll Blocks are self-lubricating with graphite oil plugs ll Blocks are precision ground ll olerances not noted are held to ±.010 and are non-cumulative Easily altered if necessary amina logo and part number is etched/stamped on part B C H F NOES & SPECIFICIONS: 32 Ref. Screw hole locations ±0.25 ø12 G6 (2) Holes owel hole locations ±0.10 Material: Steel Cross-hatched areas surface hardened for M12 Soc. Hd. Scr. (N) Holes Graphite Plugs this surface 15 Min M10 apped Hole for Pullout (2) Holes ± ±0.025 E ± R 38 KEEPER BOCKS SOI-SEE SEF-UBRICING 6mm PR (N) HOES B C E F H ±0.25 ±0.025 R R R R R R R R R R R R R R R R

39 Keeper Blocks 13mm 13 0 ± B C M10 apped Holes for Pullout (2) Holes 17 E 0 H G Ref. 49 Ref. NOES & SPECIFICIONS: Screw hole locations ±0.25 owel hole locations ±0.10 Material: Steel Cross-hatched areas surface hardened for M16 S.H.C.S. ø12 G6 Graphite plugs this surface 15 Min ±0.025 F R KEEPER BOCKS SOI-SEE SEF-UBRICING 13mm PR (N) B C E F G H PR (N) B C E F G H HOES ±0.25 ±0.025 HOES ±0.25 ±0.025 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R

40 NMS U & V Blocks Metric Product Features hese 65, 75, 125 and 175mm U and V Blocks are manufactured to metric dimensions and fully meet the NMS standard. he U Block is manufactured from hardened steel. he V block is self-lubricating in design and is available in either bronze with oil-impregnated graphite plugs or steel with oil-impregnated graphite plugs. Figure - Steel U Block Figure B - Self-lubricating V Block Figure C - ssembly MERIS: U Blocks are manufactured from high quality carburized steel. hey are precision ground and hardened to Rc OERNCES: Between screw holes Between dowel holes Unless otherwise noted ± 0.12mm ± 0.10mm ± 0.25mm V Blocks are manufactured from bronze material with oil impregnated graphite plugs or steel with oilimpregnated graphite plugs. RECOMMENE MOUNING SCRES & OES: 65mm blocks: M12 S.H.C.S./M12 OES 75mm blocks: M12 S.H.C.S. /M12 OES 125mm blocks: M16 S.H.C.S. M16 OES 175mm blocks: M16 S.H.C.S. M16 OES 40

41 NMS U & V Blocks Metric Figure - Steel U Block Figure B - Self-lubricating V Block Figure C - ssembly U Block Part Number Steel V Block Part Number Bronze V Block Part Number idth (mm) ength (mm) Hole Qty. (mm) B (mm) C (mm) H1 (mm) H2 (mm) H3 (mm) G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

42 Center Keys & Guides CENER KEY GUIE (G41) CENER KEY (G42 & 43) ø12 G6 (2) Holes ø12 G6 (2) Holes C B C B M12 x 1.75 ap Pullout Hole (2) Holes M12 x 1.75 ap Pullout Hole (2) Holes for M12 Soc. Hd. Scr. (N) Holes for M12 Soc. Hd. Scr. (N) Holes x owel Central 25 2 x owel 0.02 Central Graphite Plugs these surfaces X Y Steel Bronze Self-ubricating x R B B ube rea B B 42 NMS COE (X) CENER KEYS & GUIES MERIC NMS COE (Y) B C N G G G G G G NOES & SPECIFICIONS: Screw hole locations ±0.25 owel hole locations ±0.10 Material: Steel Cross-hatched areas surface hardened

43 SOUIONS O FI YOUR SPECI PPICIONS In addition to made to print specials, a wide range of catalog components can be modified to meet customer specific applications. Round, flat, simple or complex, we want to make those one-of-a-kind parts for you. t amina, our focus is on offering specials to you quickly and at a reasonable price. Please send your prints and requests for quotation to sales@lamina.com. 43

44 Commitment to Quality & Customer Satisfaction ayton amina is a leading manufacturer of tool, die and mold components for the metal-working and plastics industries. s a customer-focused, world-class supplier of choice, we provide the brands, product breadth, distribution network and technical support for all your metal forming needs. Our goal is to give our customers the most innovative and valueadded products and services. * *ayton amina s line of anly products is available only to North merica ayton amina Corporation. ll rights reserved /17

WEAR PRODUCTS. Inch & Metric Sizes Self-Lubricating & Standard Models

WEAR PRODUCTS. Inch & Metric Sizes Self-Lubricating & Standard Models WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models WEAR PRODUCTS SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON IEM is a leading manufacturer of die and mold components supplied globally

More information

TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models

TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models WEAR PRODUCTS Service We Deliver and Quality You Can Depend On DANLY IEM, a division of Connell Limited

More information

Pins and Bushes. Oil-less Standard Die-set Press Fit Pin and Bush.

Pins and Bushes. Oil-less Standard Die-set Press Fit Pin and Bush. Oil-less Standard ie-set Press Fit Pin and ush Hales self-lubricating die components offer industry self-lubricating, maintenance-free performance resulting in overall cost savings and operational safety.

More information

H T STD STD STD

H T STD STD STD Ejector Pins Nitrided - Shoulder Inch Material AISI: H13 1.2344 D S Cat. No. 6 10 14 H T STD. +.005 STD. +.005 STD. +.005 1/32 1/2 EP03 06-1/2 065-1/2 2 EP03 06-2 10-2 105-2 1/4 1/8 1/2 EP04 06-1/2 10-1/2

More information

PINS & BUSHINGS METRIC

PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts

More information

Parting Line Interlocks

Parting Line Interlocks 144 Innovative old Interlocks Parting ine Interlocks For accurate alignment between mold halves ll machining can be done from the parting line saving set-up time and machining costs Components can be purchased

More information

PINS & BUSHINGS METRIC

PINS & BUSHINGS METRIC www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS METRIC www.danly.com PINS & BUSHINGS METRIC CONTENTS General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable

More information

PINS & BUSHINGS METRIC

PINS & BUSHINGS METRIC www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS METRIC Steel, Bronze & Self-Lubricating Bushings Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS METRIC Strategically located

More information

Ball-Bearing Products

Ball-Bearing Products Ball-Bearing Products www.daytonlamina.com Check our website for the latest technical information. Ball-Bearing Components Contents Ball-Bearing Operating Data & Design Selection... 2 Ball-Bearing Component

More information

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE GENERAL INFORMATION CAM DIES

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE GENERAL INFORMATION CAM DIES GENERAL INFORMATION 1. ANGLE OF CAM SLIDE AND DRIVERS ANGLE OF CAM SLIDE AND DRIVERS ARE TO BE DIMENSIONED ON THE DIE DESIGN. FOR DRIVER ANGLES SEE, PAGE 4-7. AVOID THE USE OF CAM ADAPTORS. IF THE CAM

More information

Round Die Products. Check our website for the latest technical information.

Round Die Products.   Check our website for the latest technical information. Round Die Products www.anchorlamina.com Check our website for the latest technical information. 1 BUSHINGS General Information Bushings... 2 & 3 STANDARD SHOULDER BUSHINGS Bronze Plated & Solid Steel...

More information

Laminar Seal Rings. Advantages of Laminar Seal Rings. Laminar Seal Rings Available From Stock

Laminar Seal Rings. Advantages of Laminar Seal Rings. Laminar Seal Rings Available From Stock Smalley Laminar Seal Ring set is a metallic labyrinth seal consisting of multiple rings in a groove. he arrangement and the specific orientation of the rings are dictated by the application and the severity

More information

I;! Anchor Lamina. l;! Lamina Components. Ball-Bearing Products. Check our website for the latest technical information.

I;! Anchor Lamina. l;! Lamina Components. Ball-Bearing Products.   Check our website for the latest technical information. I;! Anchor Lamina l;! Lamina Components Ball-Bearing Products www.anchorlamina.com Check our website for the latest technical information. Ball-Bearing Components CONTENTS Ball-Bearing Operating Data &

More information

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On

More information

Carbide Drills When productivity matters - Stub 1. to Long 1

Carbide Drills When productivity matters - Stub 1. to Long 1 CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill

More information

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable REAMERS Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable the ultimate reference book is here... BLACK BOOK The ultimate reference book:

More information

TOOLING STANDARDS AND MACHINE SPECIFICATIONS DOCUMENT #END 001 REVISION LEVEL: A9

TOOLING STANDARDS AND MACHINE SPECIFICATIONS DOCUMENT #END 001 REVISION LEVEL: A9 1 P.O. Box 447 160 E Pond, Romeo, MI. 48065 Phone (586) 752-4527 Fax (586) 752-0896 TOOLING STANDARDS AND MACHINE SPECIFICATIONS DOCUMENT #END 001 REVISION LEVEL: A9 DISTRIBUTION LIST OF TOOLING STANDARDS

More information

Parallel Grippers- Triple Wedge Centering Series

Parallel Grippers- Triple Wedge Centering Series RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the

More information

Improved Grooving Performance with Expansive Tooling System Lineup

Improved Grooving Performance with Expansive Tooling System Lineup KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD

More information

NORTH AMERICA ONLY PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED)

NORTH AMERICA ONLY PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED) PIERCE NUT UNIT REEL-FEED HEAD (SPRING OPERATED) PAGE 3. FOR DRAWING TEMPLATE CONTACT STAMPING DESIGN ENGINEERING DEPT. (313)337-6514. EACH PART MUST BE PERMANENTLY MARKED WITH THE FULL ORDERING NUMBER

More information

Angular Grippers- 180 Series

Angular Grippers- 180 Series D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:

More information

AERIAL & DIE MOUNT WIDE CAMS CATALOG

AERIAL & DIE MOUNT WIDE CAMS CATALOG AERIAL & DIE MOUNT WIDE CAMS CATALOG AERIAL & DIE MOUNT WIDE CAMS SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON IEM is a leading manufacturer of die and mold components supplied globally to the parts

More information

A Zy-Tech Global Industries Product

A Zy-Tech Global Industries Product A Zy-Tech Global Industries Product Worm & evel Gear Operators Another quality product from Zy-Tech Global Industries, Inc. Zy-Gear gear operators are designed for long lasting dependable service in oil

More information

NATIONAL NORTHEAST CORPORATION. a division of Wakefield Thermal Solutions, Inc.

NATIONAL NORTHEAST CORPORATION. a division of Wakefield Thermal Solutions, Inc. NIONL NORHES CORPORION NIONL NORHES CORPORION National Northeast Corporation is a leading extruder and fabricator of aluminum structural shapes and components. ith more than fifty years of manufacturing

More information

SPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...

SPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic... Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................

More information

GEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE

GEAR PUMPS TOUGH INTERNAL GEAR SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE TOUGH INTERNAL GEAR GEAR PUMPS SIMPLE SIMPLE EXTERNAL GEAR COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products,

More information

Catalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement

Catalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement atalog No. 12118E Micro Micro Series PED 2014/68/EU OMPIANT Ideal for oil Spring Replacement Micro Series Introduction DADO produces top quality products at competitive prices and provides a superior level

More information

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck

More information

CAM INDEX PAGE DATE DESCRIPTION

CAM INDEX PAGE DATE DESCRIPTION CM INX 8/24/7 PG T SCRIPTION C-1 8/24/7 Cam Index C-2 6/27/7 erial Cam Specifications C-3 3/23/4 erial Cam Specifications C-4 6/9/4 Standard erial Cam nvelope C-5 8/24/7 Performance Calculation, ie Mount

More information

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation

Edge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11

More information

Catalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications

Catalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen

More information

and solid bottom 10 straight sections 72 Fittings 42 Covers 77 Splices & connectors 24 accessories Metallic 26 long-span tray

and solid bottom 10 straight sections 72 Fittings 42 Covers 77 Splices & connectors 24 accessories Metallic 26 long-span tray P CLE TY LDDE, Trough & Solid ottom ITY luminum Tray 10 straight sections Fittings 20 Covers 22 splices & connectors accessories Metallic 26 long-span tray metallic 28 steel tray 30 stainless Steel tray

More information

Double Acting Spring Assist

Double Acting Spring Assist 1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied

More information

H1600 Mechanical Overload Clutches HOR Series

H1600 Mechanical Overload Clutches HOR Series H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

E-Z LIFTER. Smooth pivoting motion INHIBITS galling and reduces wear. Heel plates stabilize actuator and ACT as a POSITIVE STOP for the Lifter Blank

E-Z LIFTER. Smooth pivoting motion INHIBITS galling and reduces wear. Heel plates stabilize actuator and ACT as a POSITIVE STOP for the Lifter Blank E-Z LIFTER Undercut Relief System Patent No. 5,281,127 2 4 3 1 5 6 ADVANTAGES 1 2 3 4 5 6 Design eliminates blow back problems Smooth pivoting motion INHIBITS galling and reduces wear Heel plates stabilize

More information

Pull handles, tubular handles, recessed handles

Pull handles, tubular handles, recessed handles , tubular handles, recessed handles 303 K0187 170 R25 55 14 M8 35 R12 140 32 82 R8 14 M8 57 uroplast PF 31, black. ushing brass or galvanized steel. igh-gloss polished. K0187.101 25 ssembly: From the rear.

More information

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES 4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional

More information

Roller Selection Flowchart

Roller Selection Flowchart Selection Selection Flowchart Solus offers a line of conveyor rollers and components which are engineered to provide totally maintenance free service. These rollers are quiet, need no lubrication, are

More information

TECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production.

TECHNICAL. AVAILABLE UPON REqUEST CHAPTER CONTENTS. Optical comparator: For process control during serial production. TECHNICAL INFORmATION INFORmATION ABOUT CV / RE AVAILABLE UPON REqUEST Optical comparator: For process control during serial production. Engineering: Development and design using the latest CAD systems.

More information

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs

More information

UC-SERIES TIMKEN BALL BEARING HOUSED UNITS

UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES

More information

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high

More information

PWA ANSI / ASME B73.1 PROCESS PUMP

PWA ANSI / ASME B73.1 PROCESS PUMP PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

LOCKING BUSHES & SHAFT COLLARS

LOCKING BUSHES & SHAFT COLLARS LOCKING BUSHES & SHAFT COLLARS INDEX TAPER BUSHES Page 3 WELD-ON HUBS Page 4 QD BUSHES Page 5 MECHANICAL LOCKING BUSHES CAL1 (Not Self-Centering) Page 6 CAL2 (Not Self-Centering) Page 7 CAL3 (Self-Centering)

More information

Index. H&O DIE SUPPLY, INC Ejector Pins-Nitrided-Parallel-Inch. Ejector Pins-Nitrided-Parallel-Metric

Index. H&O DIE SUPPLY, INC Ejector Pins-Nitrided-Parallel-Inch. Ejector Pins-Nitrided-Parallel-Metric Index B2 B12 Ejector Pins-Nitrided-Parallel-Inch Ejector Pins-Nitrided-Parallel-Metric B19 B13 D-HeadEjector Pins Ejector Pins-Nitrided-Shoulder-Metric B3 B14 Ejector Pins-Nitrided-Shoulder-Inch Ejector

More information

Model R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS.

Model R. q Fig. 81-H: Standard Type: q A, q B, q C, q D, q E, q F. q Fig. C-81-H: Corrosion Resistant CONSTANT SUPPORTS. OSA SUPPORS odel R q Fig. 81-: Standard : q A, q, q, q, q, q F q Fig. -81-: orrosion Resistant : q A, q, q, q, q, q F onstant Support Finish: Standard finish; painted with semi gloss primer. orrosion resistant;

More information

BELL, SCOTT & CO. LTD.

BELL, SCOTT & CO. LTD. Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

All GP Impact Sockets feature the GP High Torque Drive Benefits are:

All GP Impact Sockets feature the GP High Torque Drive Benefits are: GP is Grey Pneumatic (GP) through our distributors supplies the world s automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality impact and

More information

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173

AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173 T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,

More information

Through Hole Parallel Gripper PPC Series

Through Hole Parallel Gripper PPC Series ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications

More information

TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES. 10 Trailer Sockets. 11 Nose Boxes & Socket Breakers

TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES. 10 Trailer Sockets. 11 Nose Boxes & Socket Breakers 02 10 Trailer Sockets 11 Nose Boxes & Socket Breakers 12 Trailer Plugs 16 Junction Boxes 16 Corrosion Preventive Sealant TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES

More information

KGD for Automatic Lathe

KGD for Automatic Lathe Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535

More information

ACCU-BEND DESIGN AND MAINTENANCE RECOMMENDATIONS

ACCU-BEND DESIGN AND MAINTENANCE RECOMMENDATIONS ACCU-BEND ACCU-BEND ACCU-BEND DESIGN AND MAINTENANCE RECOMMENDATIONS INSIST ON an ACCU-BEND To protect your Accu-Bend and for optimal performance, please remember the following: Use light oil (20W) before

More information

grippers pneumatic precision parallel movement DPP DirectConnect Series

grippers pneumatic precision parallel movement DPP DirectConnect Series grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded

More information

Cutting

Cutting wist drills Miniature drills Sheet metal drills Core drills Step drills Centring and spot drills aper pin drills Solid carbide drills Solid carbide tapping ools Carbide reversible cutting inserts wist

More information

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

More information

Boston Gear ORC Series

Boston Gear ORC Series Boston Gear ORC Series Trig-O-Matic Overload Release Clutches Installation and Maintenance Instructions Doc. No. ORC Series Model S www.bostongear.com ORC SERIES TRIG-O-MATIC OVERLOAD RELEASE CLUTCHES

More information

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,

Balanced to G RPM s. the nose nut to be tightened to 100% Inspected, WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5

More information

TOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:

TOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l: GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction

More information

CYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG

CYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in

More information

INTERCHANGEABLE BUSHINGS

INTERCHANGEABLE BUSHINGS INTERCHNGEE Index SECTION PROUCT PGE INEX................................................................................... - USHING TYPES..........................................................................

More information

HepcoMotion MHD Heavy Duty Track Roller Guidance System

HepcoMotion MHD Heavy Duty Track Roller Guidance System Motion Without Limits HepcoMotion MHD Heavy Duty Track Roller Guidance System product overview The HepcoMotion MHD system provides an accurate, durable and low friction linear guide which is particularly

More information

Split plummer block housings SONL series

Split plummer block housings SONL series Split plummer block housings SONL series Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22 Shaft diameter range 75 to 240 mm

More information

Parallel Grippers- DPDS DIRECTCONNECT Modular Series

Parallel Grippers- DPDS DIRECTCONNECT Modular Series Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers

More information

Camcar Socket Screw Catalog

Camcar Socket Screw Catalog Camcar Socket Screw Catalog Effective April 1, 2017 Camcar Socket Screws Suior Socket Screw Products STANLEY Engineered Fastening is committed to offering a broad range of socket screw standard products

More information

Model 6. Power Wheel. Planetary Gear Drive

Model 6. Power Wheel. Planetary Gear Drive Model 6 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 6 Wheel Drives - Single & Double Reduction 4-5 Model 6 Wheel Drives w/a2 Series Integral Parking Brake - Single & Double Reduction

More information

PARALLEL PNEUMATIC MINIATURE GRIPPER

PARALLEL PNEUMATIC MINIATURE GRIPPER PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on

More information

Engineering Data. Assembly Length. How to Determine Correct Assembly Length

Engineering Data. Assembly Length. How to Determine Correct Assembly Length Assembly Length How to Determine Correct Assembly Length For most assemblies, the correct assembly length may be determined by direct measurement of the equipment or a drawing. Minimum bend radii as shown

More information

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials.

Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. pex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.. since 1933. The

More information

R100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives

R100/R200 Series & VR100/VR200 Series Spiral Bevel Gear Drives R100/R200 Series & R100/R200 Series Spiral evel ear rives R100/R200 R100/R200 oston R and R 100 and 200 Series Spiral evel ear oxes are available in four sizes with horsepowers ranging from 2.19 to 50.92.

More information

Model 8. Power Wheel. Planetary Gear Drive

Model 8. Power Wheel. Planetary Gear Drive Model 8 Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Model 8 Wheel Drives - Double Reduction 4-5 Model 8 Wheel Drives w/a2 Series Integral Parking Brake - Double Reduction 6-7 Model 8 Shaft

More information

GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE

GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction

More information

Parallel Grippers- DPW DIRECTCONNECT Wide Body Series

Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure

More information

DieMax XL TM Maximum Life Springs

DieMax XL TM Maximum Life Springs TRUSTED SOLUTIONS AND INNOVATION DieMax XL TM Maximum Life Springs Meets ISO Standards DieMax XL TM Maximum Life Springs Strategically located to serve you better IEM, a division of Connell Limited Partnership,

More information

Split plummer block housings SE 2, 3, 5 and 6 series

Split plummer block housings SE 2, 3, 5 and 6 series Split plummer block housings SE 2, 3, 5 and 6 series 3 Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 02, 03, 22, 23, 32 Shaft

More information

DPT Pilots DPA. Regular. Positive Pick-Up 8/9 6/7. Matrixes. Solid EDM Blanks DN DR. Round/ Shape 14/15 16

DPT Pilots DPA. Regular. Positive Pick-Up 8/9 6/7. Matrixes. Solid EDM Blanks DN DR. Round/ Shape 14/15 16 unches Standard Shapes J Jektole egular T ilots J Extended ange Jektole unches X O J egular unches K ound/ Shape ound/ Shape egular ositive ick-up ound/ Shape /3 4/5 6/7 8/9 13 egular ilots unches Clospace

More information

DESIGN AND MAINTENANCE RECOMMENDATIONS

DESIGN AND MAINTENANCE RECOMMENDATIONS NEW DESIGN! ACCU-BEND TM ACCU-BEND TM DESIGN AND MAINTENANCE RECOMMENDATIONS INSIST ON AN ACCU-BEND TM PRICED TO GIVE YOU A COMPETITIVE EDGE! To protect your Accu-Bend and for optimal performance, please

More information

Quadro Aluminum Worm Gear Reducers

Quadro Aluminum Worm Gear Reducers Quadro Aluminum Worm Gear educers A egal Brand riven to be the Best Quadro Aluminum Worm Gear educers Advantages ompact and lightweight aluminum alloy housing is up to one third smaller than alternatives

More information

Table of Contents. Standard Taps

Table of Contents. Standard Taps Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw

More information

Commercial Dock Bumpers Dimensional Catalog

Commercial Dock Bumpers Dimensional Catalog Commercial ock umpers imensional Catalog Commercial ock umpers JONSON ependability The Johnson brand name stands for dependability. hether it is a Johnson CUTLESS earing, Johnson Stuffing ox, Johnson emountable

More information

Collet Chucks and Collets

Collet Chucks and Collets ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16

More information

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page... group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

More information

Specialty Ball Bearings

Specialty Ball Bearings Specialty all earings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RC earings Incorporated (RC earings, RC) has had a long

More information

B-1125 DANKO STOCK. DANKO XL SKID UNIT UPF Defender Poly Tank

B-1125 DANKO STOCK. DANKO XL SKID UNIT UPF Defender Poly Tank FIRE PUMP DANKO XL SKID UNIT UPF Defender Poly Tank A Waterous 2515LE pump shall be provided and bolted directly to the specified engine and capable of the following performance: Max Pressure - 75 GPM

More information

Angular Motion Gripper Product Overview

Angular Motion Gripper Product Overview 2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular

More information

Quadro Aluminum Worm Gear Reducers

Quadro Aluminum Worm Gear Reducers Quadro luminum Worm Gear educers egal rand riven to be the est Quadro luminum Worm Gear educers dvantages ompact and lightweight aluminum alloy housing is up to one third smaller than alternatives deal

More information

Precision Mini Power Slides-Built-in Cylinder

Precision Mini Power Slides-Built-in Cylinder Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"

More information

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.

Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. 4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2

More information

Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater

Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the

More information

Mounting and Assembly of Sandwich Bodies

Mounting and Assembly of Sandwich Bodies Mounting and ssembly of Sandwich odies Mounting of ISO 0 (CEO ) Sandwiches Many of Sun s ISO 0 (CEO ) sandwich bodies are designed for multi-functional use to permit maximum circuit flexibility. With the

More information

COATING SELECTION CHART

COATING SELECTION CHART On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,

More information

Drills Jobber, R40 UNI

Drills Jobber, R40 UNI Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87

More information

Ceramic Linear Bushes 47

Ceramic Linear Bushes 47 Ceramic Coated Bearings Manufactured from a special grade of aluminum then ceramic coated using a proprietary coating process. The surface hardness achieved is Rockwell C-85, which is why the bearings

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

Section VIII Hydraulic Tooling

Section VIII Hydraulic Tooling Section VIII Hydraulic Tooling MSTRLIN CYLINR CCSSORY MTING CHRT Masterline Knuckle Masterline Clevis racket Masterline RS Masterline lignment Coupler KN-1 C-1 1/2 x 1 7/8-RS SC-5 KN-2 C-2 1/2 x 2 5/8-RS

More information

LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION

LSM SFM. METRIC SPECIFICATIONS and TECHNICAL INFORMATION Metric Bushings Specifications M is for Metric RCM LSM SFM SFXM LM PM HM HLM SPM NM SCM FGM HGM SPECIFICATIONS and TECHNICAL INFORMATION BUSHING INFORMATION Application Information is listed on the specific

More information

Maximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM

Maximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM RIN S LTION TORS We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such as temperature,

More information

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance

More information