889 High Performance Sliding Door

Size: px

Start display at page:

Download "889 High Performance Sliding Door"

Dale Kennedy
6 years ago
Views:

889 High Performance Sliding Door Doors Features Robust construction High performance weathering capabilities Low air infiltration Adjustable height tandem rollers Accepts commercial locks Dry glazed

1 889 High Performance Sliding Door Doors Features Robust construction High performance weathering capabilities Low air infiltration Adjustable height tandem rollers Accepts commercial locks Dry glazed Security construction Frame matches 400 Narrowline Plant on adaptor allows further adaption to many framing systems Options 1. XO, OX, OXO, XXO, OXX and OXXO 2. Multiple panel configurations 3. Optional midrails 4. Four meeting stile strengths 5. Glass thicknesses from 5 to 10.38mm as required and 25mm DG units 7. Low profile sills 8. New super high performance sill Performance 1. Has been tested and rated in accordance with AS Static test reports available. 3. Acoustic test reports*not all configurations tested Recommended for use with: 400 Narrowline 601 Narrowline 471 Double Hung Window 480 Sliding Window 586 Bifold CTDM

2 889 3

3 889 4

4 Door design rating Doors Explanation of tables The Australian Standard AS 2047 requires that doors be rated for design wind load pressure. That rating is the number of pascals that the door will withstand and comply to the standard for performance. The rating required depends on factors such as geographic location, height of building and degree of exposure (terrain category) and can vary from under 500 Pa to more than 3000 Pa. When the purchaser does not nominate the rating required, the chart published on the following page of this manual may be used as a guide. The rating for a given door depends on its size, the strength of its vertical and horizontal members and the glass type and thickness. The tables on the following page may be used to determine the safe rating for a given door or to select the most appropriate specification for a nominated rating. The tables give ratings for nominal panel sizes from which two, three or four panel assemblies can be configures. e.g. a nominal panel size of 2400 x 1200 will suit 2400 high x 2400 XO, 3600 XXO or 4880 wide OXXO respectively. To determine the rating for a particular panel size, it is necessary to check the individual ratings based on: Strength of interlocks Strength of midrails when applicable Strength of glass Then use lowest rating figure obtained from above. Conversely, if the panel size and required pascal rating are known, the minimum specifications can be determined. Notes on tables: 1. Overall panel size = Door height - 67mm. 2. The tables on page 7 and Figure are based on theoretical section properties, not on approved tests as specified by AS Doors for housing use serviceability limit state method (l/150 deflection) in all applications. 4. Doors for residential buildings other than housing use ultimate limit state method and serviceability limit state design method (l/180 deflection). 5. Doors for buildings other than residential buildings and housing use ultimate limit state method and serviceability limit state design method (l/250 deflection). Suitability needs to be referred to Capral s qualified engineer. 6. Glass selection should be referred to your glass supplier. 7. Midrails are available for use with this suite. These can be used to increase the torsional rigidity if that is required. 8. Refer to Capral s qualified engineer or your Capral Account Manager for recommendations

5 Configurations and maximum recommended sizes 889 6

6 Interlock Wind Pressure Tables Doors Max Stress = 110MPa S = Serviceability limit state l/180 U = Ultimate limit state method Type 1 : Interlock combination EP5695 Iyy = 325 x 10 3 mm 4 Ixx = 243 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U Door Width (mm) Type 2 Interlock combination EP5695/EP4945 Iyy = 981 x 10 3 mm 4 Ixx = 289 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) Please refer to Door Design Rating at the beginning of this section 889 7

7 Interlock Wind Pressure Tables (cont) Type 2b Interlock combination EP5695/EP5696* Iyy = 1075 x 10 3 mm 4 Ixx = 324 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) * EP5696 not generally stocked Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Type 3 Interlock combination EP4945/EP4945 Iyy = 1637 x 10 3 mm 4 Ixx = 355 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Please refer to Door Design Rating at the beginning of this section 889 8

8 Interlock Wind Pressure Tables (cont) Doors Type 3b Interlock combination EP5696/EP5696* Iyy = 1826 x 10 3 mm 4 Ixx = 404 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) * EP5696 not generally stocked. Note that this extrusion can accept 40x40 RHS to improve performance. Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Type 4 Interlock combination EP5695/EP5699 Iyy = 1667 x 10 3 mm 4 Ixx = 370 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Please refer to Door Design Rating at the beginning of this section 889 9

9 Interlock Wind Pressure Tables (cont) Type 1 OXO Meeting Stiles EP5695/EP5700/EP5698 Iyy = 434 x 10 3 mm 4 Ixx = 330 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa Door Width (mm) S U S U S U Type 2 OXO Meeting Stiles EP4945/EP5700*/EP5698 Iyy = 1090 x 10 3 mm 4 Ixx = 508 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) * EP5700 can accept 32mm x 8mm steel flat bars (2 off) to improve performance. Please refer to Door Design Rating at the beginning of this section

10 Interlock Wind Pressure Tables (cont) Doors Type 1 OXXO Meeting Stiles EP5697/EP5698 Iyy = 1062 x 10 3 mm 4 Ixx = 490 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Type 2 OXXO Meeting Stiles EQ3505*/EP5698 Iyy = 1636 x 10 3 mm 4 Ixx = 497 x 10 3 mm 4 Door Height (mm) Maximum Design Pressure kpa 2100 S U S U S U Door Width (mm) * EQ3505 not generally stocked. Where ultimate design wind pressure exceeds 5 kpa, please contact Capral for assistance. Please refer to Door Design Rating at the beginning of this section

11 Full size sections

12 Full size sections (cont) Doors

13 Full size sections (cont)

14 Full size sections (cont) Doors

15 Full size sections (cont)

16 Full size sections (cont) Doors

17 Full size sections (cont)

18 Full size sections (cont) Doors

19 Hardware M mm Glazing channel M /6.38mm Glazing channel M mm Glazing channel M mm Glazing Channel M mm Glazing Channel M mm Glazing Channel M Buffer Stop EDPM M Plastic plug nylon M889036MF Bottom fixing bracket Mill Finish M889033MF Lock strike adaptor M889035BK Locating block nylon M Finseal 5.25 high M /16 Washer M S/Steel tandem wheel assembly 50kg M Top fixing bracket M Anti binding block M Roller carriage & white nylon wheel 25kg M Precision bearing tandem carriage & black nylon wheel 75kg M889256BK Albany mortice lock package key M585256BK M585256PR M585256PW DS950 Lock package Keyed alike M585258BK M585258JC M585258PR M585258PW DS920 Lock package Keyed alike M Foam gasket sill 45.7m roll M Foam gasket head 45.7m roll

20 Half size assembly - 60mm sill Doors

21 Half size assembly - 47mm sill

22 Half size assembly - 47mm sill, Double glazed Doors

23 Half size assembly - Deep Sill

24 Half size assembly - XXO door Doors

25 Half size assembly - XXO door (cont)

26 Half size assembly - XXXO door Doors

27 Half size assembly - XXXO door (cont)

28 Half size assembly - OXOL door Doors

29 Half size assembly - OXXO door

30 Half size assembly - Plant on adaptor Doors

31 Half size assembly - Flydoor

32 Half size assembly - Flydoor(cont) Doors

33 Half size assembly (cont)

34 Half size assembly (cont) Doors

35 Half size assembly (cont)

36 Structural details Doors

37 Structural details (cont)

38 Glazing details Doors For detailed glazing methods and wedge configurations, refer Table 1-4, Framing System - Selection Chart, on page

39 889 40

U.S. ALUMINUM 3025 SERIES SLIDING DOORS

U.S. ALUMINUM 3025 SERIES SLIDING S 83 83 1/8" 40" 72" 71 1.1 1.5 1.3 1.7 1.8 1.9 (BEYOND) TESTED TO AAMA LC25 ACCOMODATES 1" (25mm) AND 1 (32mm) GLAZING OPTIONAL THERMALLY BROKEN HEAD AND JAMB CHANNELS