ART. 60 Ball valve one pieces body
|
|
- Kathryn Mills
- 6 years ago
- Views:
Transcription
1 COMMODITY valves
2 ART. 60 Ball valve one pieces body Za.Ve.Ro. API 6D/BS 5351 fl oating ball Valves, full and reduced bore, are one piece screwed body, side entry, blowout proof stem, fi tted with antistatic device. Valves are available with NPT, BSP or AS (male and female) ends lbs psi Full bore A Reduced bore ød locking device extended stem NPT - BSP threated ends Soft seated Construction B16.34 BS 5351 Fire safe system API 607 Antistatic TA-UFT = Face to Face up to 3000 psi; = 75 for 6000 psi SIZE-BORE () Dimensions in mm WEIT Full Reduced DN ød A (Kg) 1/ /8 x 1/ / /2 x 3/ / /4 x 1/ / x 3/ /4 x / /2 x 1 1/ / x 1 1/ x 2 1/ x X ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
3 15-01 Commodity ART. 90 Ball valve one pieces body Za.Ve.Ro. API 6D/BS 5351 fl oating ball Valves, full and reduced bore, designed for high pressure are one piece screwed body, side entry, blowout proof stem, fi tted with antistatic device.valves are available with NPT, BSP or AS (male and female) ends lbs psi Full bore A Reduced bore ød locking device extended stem NPT - BSP threated ends Soft seated Construction B16.34 BS 5351 Fire safe system API 607 Antistatic TA-UFT SIZE-BORE () CASS Dimensions in mm WEIT Full Reduced DN ød A (Kg) 1/ /8 x 1/4 10 3/ /2 x 3/8 15 1/ /4 x 1/2 20 3/ x 3/ /4 x / /2 x 1 1/ / x 1 1/ SIZE-BORE () CASS Dimensions in mm WEIT Full Reduced DN ød A (Kg) 1/ /8 x 1/4 10 3/ /2 x 3/8 15 1/ /4 x 1/2 20 3/ x 3/ /4 x / /2 x 1 1/ / x 1 1/ ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on 51
4 ART. 62 Ball valve one pieces body with integral nipple Za.Ve.Ro. API 6D/BS 5351 fl oating ball Valves, full and reduced bore, are one piece screwed body, side entry, blowout proof stem, fi tted with antistatic device. Valves are available with nipples and welding ends (BW, PE, SW) lbs psi A Full bore Reduced bore ød N N - 1 Standard nipples N=80 mm for stainless steel N=100 mm for carbon steel = lenght with stainless steel nipples 1 = lenght with carbon steel nipples Available on request with different nipples lenghts locking device extended stem Soft seated Construction B16.34 BS 5351 Fire safe system API 607 Antistatic TA-UFT SIZE-BORE () Dimensions in mm WEIT Full Reduced DN 1 ød A (Kg) 1/ /4 x 1/ / x 3/ /4 x / /2 x 1 1/ / x 1 1/ ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
5 15-01 Commodity ART. 92 Ball valve one pieces body with integral nipple Za.Ve.Ro. API 6D/BS 5351 fl oating ball Valves, full and reduced bore, designed for high pressure are one piece screwed body, side entry, blowout proof stem, fi tted with antistatic device. Valves are available with nipples and welding ends (BW, PE, SW) lbs psi Full bore A Reduced bore ød N N - 1 locking device extended stem Soft seated Construction B16.34 BS 5351 Fire safe system API 607 Antistatic TA-UFT Standard nipples N=80 mm for stainless steel N=100 mm for carbon steel = lenght with stainless steel nipples 1 = lenght with carbon steel nipples Available on request with different nipples lenghts SIZE-BORE () CASS Dimensions in mm WEIT Full Reduced DN 1 ød A (Kg) 1/ /4 x 1/2 20 3/ x 3/ /4 x / /2 x 1 1/ / x 1 1/ SIZE-BORE () CASS Dimensions in mm WEIT Full Reduced DN 1 ød A (Kg) 1/ /4 x 1/2 20 3/ x 3/ /4 x / /2 x 1 1/ / x 1 1/ ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on 53
6 55 ART. 110 Slanting needle valve psi Special execution on request SIZE-BORE Dimensions in mm DN 1/ ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
7 15-01 Commodity ART. 100 Needle Valve ART. 120 Needle Valve - 90 angle version 800 lbs 3000 psi K K Available from lbs 3000 psi Maximum operating temperature 250 C NPT - AS 1 Variant for gas Moving stopper (on request) SIZE-BORE Dimensions in mm Full () DN 1 K 1/ / / / / / ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on 55
8 ART. 130 Needle Valve - monobloc type ART. 135 Needle Valve - monobloc type 90 angle version 800 lbs psi K K 1 Available from lbs 3000 psi Maximum operating temperature 250 C NPT - AS SIZE-BORE Dimensions in mm Full () DN low pressure high pressure 1 K 1/ / / / / / ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
9 15-01 Commodity ART. 160 auge bearer valve psi Type A Type B K Maximum operating temperature 250 C NPT - Threated ends Variant for gas SIZE-BORE Dimensions in mm Full () DN K 1/ / / ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on 57
10 ART. 140 Check valve Maximum operating pressure PN40 Maximum operating temperature 150 C NPT-AS-SW ENDS SIZE-BORE Dimensions in mm Viton seal for pressure up to PN6 PTFE seal for pressure PN6 PN25 PEEK seal for pressure PN25 PN64 Full () DN 1/ / / / / / / ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
11 15-01 Commodity For vertical installation only ART. 145 Ball check valve monobloc type lbs psi Maximum operating temperature 200 C Up to 300 C on request NPT-AS-SW ENDS Stellited on request SIZE-BORE Dimensions in mm Full () DN ØD 1/ / / / ød / ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on 59
12 leading production of industrial ball valves Za.ve.ro. srl since 1973 Zavero srl, Via dei Martiri 121/B, Romagnano Sesia, ITAY Phone ZA.VE.RO. srl reserves to itself the right to make all necessary changes on its products, without notice. Further information on
Commodity valves 24 / 26
Commodity valves Industrial valves - 24 / 26 ZA.VE.RO. INDUSTRIA VAVES 0 Art. 60 BA VAVE ONE PIECES BODY - FU AND REDUCED BORE 800-500 lbs 3000-6000 psi NPT - BSP - TREATED ENDS SOFT SEATED Za.Ve.Ro. API
More informationForged Floating & Trunnion-Mounted Ball Valves
Forged Floating & Trunnion-Mounted Ball Valves The Company ZA.VE.RO. S.r.l. is a leading Company in the production of industrial valves for oil, chemical, petrochemical, pipeline, natural gas, off-shore
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationBall Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
More informationBR 26d Ball valve. Stainless Steel. Application: Versions: Special versions:
Application: Stainless Steel BR 26d Ball valve Tight-closing Ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN 15
More informationTwo-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
More informationPRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
More informationKerotest N-Series Needle Valves CRN Approved
K1514 K5534 Product Brief The N-Series is designed for processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs, and other minimally corrosive applications. Features/Benefits
More informationTwo-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationMaterials : Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting
More informationM10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
More informationM21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTwo-Way Soft Seated Ball Valve Type 14-S
Two-Way Soft Seated Ball Valve Type 14-S Design Characteristics Two piece body Trunnion mounted ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design
More information505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
More informationValves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L
More informationM10Si ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationWhat's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationTwo-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
More informationExploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
More informationSeries 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationDOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationFIG. EA PIECE FIRESAFE BALL VALVES
FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationTrunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
More informationGN G 1/2 DN13 LF2 316L POM B
+ Type: ball valve 2way Body: round Material: 1,0570/1,4404 Ball seats: from DN6 up to DN50 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 350 Bar to 500 Bar S6000 PN depending on valve size and seal
More informationInstrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
More informationBALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Carbon steel ou Stainless Steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, Socket or Butt Welding -30 C in S.S.and -20 C in carbon steel + 220 C Max Pressure : 63 Bars up to DN50, 40 Bars over Specifications
More informationFor ball valves
Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature
More informationTwo-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationType 437. Type 437. Available designs. Cap H2 Adjusting screw with bushing. Axial needle 69 beering. Lock nut. Spring plate. Spring plate. Pin.
Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut Axial needle 69 beering 16 Spring plate 12 Spindle 54 Spring 2 Outlet body 17 Spring plate 57 Pin 61 Ball 7 Disc 1 Body Threaded
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationBALL VALVE MODEL SCHEDULE ILLUSTRATION
Steinbock valves BA VAVES BA VAVE MODE SCHEDUE IUSTRATION 1. Codes of Nominal Diameter British series indicated by Axx in value, and metric series indicated by Gxx mm value. 2. Codes of Driving Modes (For
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator
More informationM21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBall Valves 15i, 17i, 18i, 16 and 26
Ball Valves i, 7i, 8i, and 2 CERTIFIED CE 3 ISO 9 FEATURES Ergonomic design Encapsulated bolting Various seal sets, connections and accessories Standardised VATACO spare parts Easy to fit actuator and
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3248 Cryogenic Valve
Series 240 Type 3248-1 and Type 3248-7 Pneumatic Control Valves Type 3248 Cryogenic Valve ANSI version Application Globe or angle valve for cryogenic applications Easy to service due to top-entry design
More informationMonoblock DBB. Page 1
Monoblock DBB Page 1 Page 2 Ball bore size 10 mm Ball and Bleeder Bleeder Antitamper ( optional ) Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend
More information3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
More informationACCESSORIES AND DIAPHRAGM SEAL
ACCESSORIES AND DIAPHRAGM SEAL TA102 TA201 TA202 TA203 TD101 TD103 TD104 TD202 Data sheet H20022a 05/2017 TD301 TD302 TD303 Trafag Italia Srl Via Cremona 1 20025 Legnano (Mi) Tel. +39 0331 59 23 97 Fax
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationQuarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationGachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.
More informationCHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)
type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these
More informationThe VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationSERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More informationGACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationK-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180
SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body
More informationT EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm
T 8048-2 EN Type 3349 Aseptic Angle Valve With USP-VI diaphragm Application Control valve for aseptic applications in the food and pharmaceutical industries according to DIN or ANSI standards with USP-VI
More informationDesign & Technology in Valves
Design & Technology in Valves Ibor has been involved in many large international projects with the world s leading EPC Company overview Ibor manufacture Ball valves, Butterfly valves, Gate Valves, Check
More informationValves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More informationBALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA
BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA APPLICATIONS Designed and executed for use in pipeline systems, which convey fluids under
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More information736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationMarwin Valve 4700 Series 2000 WOG Three Piece Ball Valves
4700 Series 2000 WO Three Piece Ball Valves Fire Tested API 607 4 th ed. APPROVEDDD The new Marwin 4700 Series represents the leading technology in three piece ball valves. This versatile 2000 WO rated
More informationFully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
More information2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded
More informationFloating Ball Valve - Design Features
408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting
More information9400 Series. Top Entry Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
9400 Series Top Entry Valves STANDARDS eets ASE B16.5, B16.10, and B16.34, API 608, API 598, API 607 Rev. 5/ISO 10497 ASE Section 8 cover/body flange connection and bolting Wall thickness complies with
More informationBALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationM21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationHydraulic Valves Needle Valves
Table of Contents 1 Hydraulic Valves Needle Valves TMN Series FFG 2000 Series FFA 2000 Series 2-3 4-5 6-7 Check Valves C Series 8-9 Flow Controls TMF Series 10-11 Low Pressure Ball Valve S95 NPT Series
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
More informationProducts for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
More informationball valve soft seated maintenance-free with floating ball
Data sheet 8220.1/8 TOPI 210 ball valve soft seated maintenance-free with floating ball The sealing variants are approved in accordance with the german clear air regulations TA-Luft 2002 Flanged ends PN
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationInstrumentation Ball Valves
Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve posioned in the flow stream to allow or prevent the flow (ball or p); 2. Stem: part which connects the obturator
More informationTABLE OF CONTENTS. Ball Valves
bal lval ves TABLE OF CONTENTS Ball Valves High Pressure, 2 Way 3 High Pressure,3 Way 4 High Pressure, Handles 5 Locking Kit 5 Low Pressure, Brass & Stainless Steel 6 Mini 5 HIGH PRESSURE BALL VALVES -
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
More informationGE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
More informationType Pressure Transmitter with display. Pressure Transmitter. Technical data. DN15-50 Body material. Stainless steel 316L Actuator material
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life Excellent
More informationM21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationBALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
More informationSeries 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More information