Fitting out schedule Linssen Grand Sturdy Mark II series. 410 AC Mark II 430 AC Mark II 470 AC Mark II 500 Variotop Mark II.

Size: px
Start display at page:

Download "Fitting out schedule Linssen Grand Sturdy Mark II series. 410 AC Mark II 430 AC Mark II 470 AC Mark II 500 Variotop Mark II."

Transcription

1 Fitting out schedule Linssen Grand Sturdy Mark II series 410 AC Mark II 430 AC Mark II 470 AC Mark II 500 Variotop Mark II English

2 Linssen Grand Sturdy 410 Mark II Basic specifications Length overall (approx.) m Length over deck (approx.) m Length waterline (approx.) m Beam (approx.) 4.20 m Draft (single) (approx.) 1.34 m Draft (twin) (approx.) 1.24 m Min. air draft (approx.) 2.90 m CE Classification B Headroom front cabin approx.±) 1.98 m Headroom cabin (approx.) 1.98 m Headroom saloon (approx.) 1.96 m Headroom aft cabin (approx.) 2.00 m Hull / topsides 6/5 mm Decks 4 mm Superstructure 4 mm Weight (approx.) ±15,500 kg Displacement ± 15.5 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control Engine(s): x 4.20 m. Single: 1 x 4 cyl. Vetus-Deutz Turbo Diesel Type DTA44, 104 kw (140 HP) rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DT44, 84 kw (114 HP) rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 2 x 95 A. AC: B Saloon: H FC: P powered by AC: A Saloon: H FC: O 2

3 Linssen Grand Sturdy 410 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin and aft cabin with plain glass (6x) All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel entrance chains on bow-, transom, and side railing entrances Polished stainless steel swimming ladder from aft deck to bathing platform incl. solid teak steps with non-slip profiles Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated stainless steel swimming platform with teak grating Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Integrated supports for davits Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Saloon-/ and dinette table with stainless steel fixed Design support Halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Slatted base in bed(s) aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Stainless steel sink in the galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in AC and FC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium series Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch type URSUS with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruceanchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation 3

4 Linssen Grand Sturdy 410 Mark II De Luxe Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch, (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc water tank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets 240V / 16A shore power connection with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position 4

5 Linssen Grand Sturdy 410 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin and aft cabin with plain glass (6x) All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel entrance chains on bow-, transom, and side railing entrances Polished stainless steel swimming ladder from aft deck to bathing platform incl. solid teak steps with anti-slip profiles Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with anti-slip profiles Integrated stainless steel swimming platform with teak grating Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Integrated supports for davits Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Saloon-/ and dinette table with stainless steel fixed Design support Halogen interior lights with wall switches 2x wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with revolving platform Slatted base in bed(s) aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Stainless steel sink in the galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in AC and FC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin 5

6 Linssen Grand Sturdy 410 Mark II Royal Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern (ø 185 mm) including hydraulic pipes Hydraulic bow thruster 95kgf (5,2 kw / 7HP) Fuel tanks with inspection-/cleaning hatch, (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc water tank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets 240V / 16A shore power connection with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 6

7 Linssen Grand Sturdy 430 Mark II Basic specifications Length overall (±) m Length over deck (±) m Length waterline (±) m Beam (±) 4.30 m Draft (single) (±) 1.35 m Draft (twin) (±) 1.20 m Minimum air draft (±) 2.96 m CE Classification A Headroom front cabin (±) 1.98 m Headroom cabin (±) 1.98 m Headroom saloon (±) 1.97 m Headroom aft cabin (±) 1.98 m Hull / topsides 6/5 mm Decks 4 mm Superstructure 4 mm Weight ±19,000 kg Displacement ± 19 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control En g i n e(s): 13,50 x 4,30 m. Single: 1 x 6 cyl. Vetus-Deutz Turbo Diesel Type DT66, 125 kw (170 HP) rpm Gearbox: ZF 45-H / 2.5 : 1, Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DT44, 84 kw (114 HP) rpm Gearbox: ZF 45-H / 2.5 :1 Alternator: 2 x 95 A. AC: B Saloon: H FC: P powered by AC: A Saloon: H FC: O 7

8 Linssen Grand Sturdy 430 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin (6x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single and 2 cleats mid front Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior and finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin Spacious hanging-locker in aft cabin Wastebucket integrated in galley Cutlery tray in galley Special slatted and sprung matrass bases in aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation 8

9 Linssen Grand Sturdy 430 Mark II De Luxe Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc watertank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection, (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform 9

10 Linssen Grand Sturdy 430 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon Aluminium dropping window in saloon, at Port side Aluminium opening portholes in cabin (6x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships 2x single and 2 cleats mid front Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior and finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Elegant solid wooden stair post with stainless steel Design hand rail Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches 2x luxury wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin Spacious hanging-locker in aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with revolving platform Special slatted and sprung matrass bases in aft cabin Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including integrated carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) 10

11 Linssen Grand Sturdy 430 Mark II Royal Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters and entrance engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160kgf (9,5 kw / 13HP) Fuel tanks with inspection-/cleaning hatch (approx. 2x 580 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic waterpressure system, including solid pvc watertank with inspection-/cleaning hatch. (approx. 440 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection, (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (1 x 50 Ah; twin 2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Original Linssen teak deck on swimming platform and stairs to aft deck Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter (2x at Twin version) Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 11

12 Linssen Grand Sturdy 470 Mark II Basic specifications Length overall (approx.) m Length over deck (approx.) m Length waterline (approx.) m Beam (approx.) 4.45 m Draft single (approx.) 1.41 m Draft (approx.) 1.36 m Minimum air draft (approx.) 3.15 m CE Classification A Headroom front cabin (approx.) 2.07 m Headroom cabin (approx.) 2.02 m Headroom saloon (approx.) 1.99 m Headroom aft cabin (approx.) 1.98 m Hull / topsides 6/5 mm Decks 4/5 mm Superstructure 4 mm Weight (approx.) ±22,000 kg Displacement ± 22 m 3 Construction multi chine Bulkheads 3 stainless steel Propeller shaft 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control Engines: x 4.45 m. Single: 1 x 6 cyl. Vetus-Deutz Turbo Diesel Type DT66, 125 kw (170 HP) rpm Gearbox: ZF 45-H / 2.5 : 1 Alternator: 1 x 95 A. Twin: 2 x 4 cyl. Vetus-Deutz Turbo Diesel Type DTA44, 104 kw (140 HP), rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 2 x 95 A. AC: A1 Saloon: H1 FC: O2 powered by AC: B2 Saloon: H1 FC: P2 12

13 Linssen Grand Sturdy 470 Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon and cabin Aluminium dropping window in saloon and cabin, at Port side Aluminium opening portholes in forward cabin (2x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing & deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks. Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches 2 Stools cherry wood - upholstery, integrated under berth in owners cabin Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches Bar in saloon with Linssen Yachts glasses Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Slatted base in bed(s) aft cabin and front cabin (layout O2) Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Gas hob, 3-burner, stainless steel Corian worktop in the galley including carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower in forward and aft cabin Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Curtain in shower cabin forward cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine foom, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment 13

14 Linssen Grand Sturdy 470 Mark II De Luxe Floor hatch in saloon hinged with gas struts for easy inspection from filters Entrance to engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Fuel tanks with inspection-/cleaning hatch (2x approx. 830 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 660 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Linssen logo on super structure Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Spare wiring for GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata Voltmeter for 12V domestic circuit Canvas and covers Cover for steering position 14

15 Linssen Grand Sturdy 470 Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on decks and side decks Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows of anodised aluminium profiles Aluminium hinged window in saloon and cabin Aluminium dropping window in saloon and cabin, at Port side Aluminium opening portholes in forward cabin (2x) and aft cabin (6x) with plain glass All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof and aft cabin, incl. curtain Integrated Stainless steel foundation for windscreen 5-part aluminium windscreen with anodised profiles with green tinted/toughened glass Permanent ventilation in toilet-/shower compartments Railing & deck fittings Polished stainless steel sea rail with stainless steel chains on bow- and side-railing entrances Integrated stern door in aft deck dodgers In transom integrated winding-/bathing steps on SB and port side Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non-slip profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Polished stainless steel handrails on saloon deck, cabin deck, along the windscreen foundation and at the steering position Provisions in hull for hydraulic passerelle Stainless steel protection set at bollards front/middle/ aft and also at railing entrances in side decks. Aluminium Linssen design mast, powder coated in Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Integrated deckboxes, U-shaped aft bench with lockable teak top and gas-pressure struts Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of high quality Decor Finish, colour cream Interior in all compartments finished of cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded saloon-/ and dinette settees, finished in real leather Curtains for windows and ventilation-/escape hatches 2 Stools cherry wood - upholstery, integrated under berth in owners cabin Original teak ship s floor with inlaid ash striping in all compartments Interior provided with polished chromium / stainlesssteel Design fittings Door and locker fittings with push buttons Luxury saloon-/ and dinette table with stainless steel fixed Design support Luxury halogen interior lights with wall switches 2x luxury wall-/ reading lamp in aft cabin and forward cabin Adjustable lighting saloon (Port & SB separated) Bar in saloon with Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting throughout the interior Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in galley Cutlery tray in galley Corner cupboard in galley with removeable revolving platform Slatted base in bed(s) aft cabin and front cabin (layout O2) Mattresses in aft cabin and front cabin Solid wooden grabrails at saloon- and cabin stairs Eq u i p m e n t 110 l. refrigerator with freezer compartment, electric Ceramic hob, stainless steel, 240V.1x 1200 W. cooking zone 1x 1700 W. cooking zone. Corian worktop in the galley including carving board Elegant stainless steel sink (1 1/2 model) in galley Electrical toilets Quiet Flush big bowl, fresh water flush (2x) Washbasin in FC and AC toilet-compartment, built into vanity unit Corian work tops in toilet compartments including integrated corian wash basin. Complete shower installation with Corian shower in forward and aft cabin Selected bathroom fittings (mirror, toilet paperholder etc.) Taps in chromium Curtain in shower cabin aft cabin Curtain in shower cabin forward cabin Linssen Yachts warm water heating with convector heaters in all compartments and design radiator in toillet compartment aft cabin. Thermostatic controls Heating (blower) at steering position Heavy duty stainless steel windscreen wiper installation on windscreen SB, middle and port Window spray-installation at windsreen SB, middle and port Hydraulic anchor winch with integrated stainless steel anchor rollers and anchor rail. With 50m. 10 mm. anchor chain and 20kg. Bruce-anchor. Stereo radio/cd, including 2 speakers in the saloon and amplified radio-antenna Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box fixed in saloon cupboard Fire extinguishers (2 kg) in pantry and aft cabin 15

16 Linssen Grand Sturdy 470 Mark II Royal Technical details Hydrolubricated propeller shaft installation, waterproof, low vibration fixed with rubber clampseals into the steel external tube. Stainless steel propeller shaft(s) Ø 40 mm, AISI-316 fitted in rubber bearings Engine/shaft(s) connection through homocinetic coupling(s) and heavy thrust bearing(s) Special low noise propeller(s) Magnesium or zinc anodes (depends on cruising area) Super sound insulation package for engine foom, consisting of a sound absorbent insulation and a non vibration package FIS -system. Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Floor hatch in saloon hinged with gas struts for easy inspection from filters and entrance engine compartment with a ladder DUAL CROSS engine foundation Hydraulic steering with adjustable steering wheel Emergency steering installation (single engine only) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160kgf (9,5 kw / 13 HP) Fuel tanks with inspection-/cleaning hatch (2x approx. 830 ltr.) Separate second (1x on engine) fuel filter with water separator, per engine Copper fuel pipe Fuel gauge Glass sight gauge fitted to the fuel tank Generator 240 V/4,0kW, Intercooling, continous rating. Remote control, Volt-, Herz-, Amp. meter and Rev. counter meter. Incl. water-/gas separator for generator exhaust Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 660 ltr.) Watertank gauge Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Deck wash pump with connection on outside steering position Electric bilge installation in engine room with automatic float switch and changeover switch for manual or auromatic operation for pumping and alarm Additional loose electric bilge pump provided with discharge tube and 12V supply cable Holding tank (toilet(s)) including Dockside-Discharge connection (approx. 220 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 2 main groups: engine (2 x 50 Ah) and domestic (3 x 120 Ah) 12 V. Sockets (5x) 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. Shore power connection equipped with an isolating transformer 14,6A/3,5 kva including softstart, for an optimal separation between domestic and shore power 240V. shore power cable Automatic battery charger (1x 60 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Engine room lighting with switch and indicator in switch panel Exterior finish Solid teak entrance door including sliding hatch Original Linssen teak deck on swimming platform and stairs to aft deck Heavy Duty Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher Ships name on bow and stern. Port of registry and registration number on stern Linssen logo on super structure Cushions for steel deck boxes in synthetic leather, colour cream Teak deckbox joint Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Including cover Solid teak table with folding section on aft deck. In s t r u m e n t s Engine instrument panel with rev.counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Spare wiring GPS/windset Linssen Yachts base package, existing of: - Raymarine ST-60 Tridata - Rudder indicator - Compass including ST-60 transducer - Low performance VHF installation at steering position Voltmeter for 12V domestic circuit Canvas and covers Cabrio incl. zip fastener back Cover for steering position 16

17 Linssen Grand Sturdy 500 Variotop Mark II Basic specifications Length overall incl. bathing platform (De Luxe) (approx.) Length overall incl. bathing platform (Royal) (approx.) Length over deck (approx.) Length waterline (approx.) Beam (approx.) Draft single (approx.) Draft twin (approx.) Minimum air draft with folded mast (De Luxe) (approx.) Minimum air draft with folded mast and Variotop parking frame (Royal) (approx.) CE Classification Headroom front cabin (approx.) Headroom cabin (approx.) Headroom saloon (approx.) Headroom aft cabin (approx.) Hull / topsides Decks Superstructure m m m m 4.88 m 1.40 m 1.35 m 4.10 m 3.50 m A 2.05 m 2.05 m 2.00 m 2.00 m 6/5 mm 4/5 mm 4 mm x 4.88 m. Weight (approx.) 28,000 kg Displacement (approx.) 28 m 3 Construction Multi chine Bulkheads 3 Propeller shafts stainless steel 316, ø 40 mm. Steering system hydraulic Engine control system Morse single handle control (De Luxe version) Engine control system Electronic MMC (Royal version) En g i n e s: Single: 1 x 6 cyl. Vetus Deutz Turbo Diesel Typ DTA66, 1 x 154 kw (210 HP) rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 1 x 55 A. (24 V) Twin: 2 x 6 cyl. Vetus Deutz Turbo Diesel Typ DT66, 2 x 125 kw (170 HP) rpm Gearbox: ZF 45-H / 2.5:1 Alternator: 2 x 55 A. (24 V) powered by 17

18 Linssen Grand Sturdy 500 Variotop Mark II AC: A4 Saloon: J1 FC: O3 AC: B1 Saloon: K2 FC: P2 OPTION AC: C Saloon: J1 FC: P2 18 OPTION AC: D Saloon: H FC: Q1

19 Linssen Grand Sturdy 500 Variotop Mark II De Luxe Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on cabin deck and saloon deck Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Additional isolating coating in the wheelhouse Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows in anodised aluminium profiles Aluminium dropping window in saloon, at port side Aluminium dropping window in saloon, at starboard side. Aluminium opening portholes in the front cabin (4x) and aft cabin (6x) with plain glass, profile in hull color All windows of tinted glass (portholes in plain glass) All windows of toughened glass Aluminium ventilation-/escape hatch with tinted glass in forward coachroof (3x), incl. curtain Aluminium escape hatch in aft cabin Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail. Bow opening lockable by means of integrated stainless steel bar Integrated stern door (SB/Port) to swimming platform Integrated winding steps on SB and port side in transom, from swimming platform Stainless steel hinged side ladder integrated in side deck rail (Port and Starboard) Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non skid profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Handrail package: Handrails on saloon deck, cabin deck, Variotop arch and at the bathing ladder Stainless steel protection set at bollards front/middle/ aft and at railing entrances in side decks. Aluminium Linssen design mast Sand Beige with crosstrees and stays Integrated moulded aft deck dodgers Provisions in hull for hydraulic passerelle Interior finish Exclusive Linssen Yachts Mark II interior Deckhead lining of elegant finish with panels Interior in all compartments finished in cherry wood Anatomically moulded dinette-/ saloon settees, finished in leather, 2 club chairs in saloon port side (only with layout K2) Anatomically moulded settee in wheelhouse, finished in leather Curtains for all windows and ventilation-/escape hatches Two Stools cherry wood/leather, integrated under berth aft cabin (only layout A4) Original teak ship s floor with inlaid ash striping in all compartments Interior provided with chromium / stainless-steel design fittings Door and locker furniture with push buttons Elegant solid wooden stair post with high polished stainless steel hand rail Luxury walnut wood dashboard with real saddlestitched leather trim Luxury saloon and dinette table with stainless steel fixed design support Helmsman s seat with gas pressurized cylinder, stainless steel rail and foot support fitted with solid teak flange. Synthetic leather. Attractive bar in saloon including Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in the pantry Cutlery tray in galley Special slatted and sprung matrass bases in aft cabin and front cabin Mattresses in aft cabin, front cabin and guest cabin type Coldfoam MK50/40 12cm (layout O3) Solid high polished stainless steel handrail at stairs to aft cabin Grab rail along front of galley (chromium) Wooden handrail on saloondeck (mid-ships) Eq u i p m e n t Electric refrigerator 110 l. with freezer compartment in galley Gas hob, 3-burner, stainless steel Corian worktop in galley incl. stainless steel sink (1 1/2 model) Extractor with revolution regulator (240 V). Incl. 2x light points above hob integrated in wooden pillar Electrical toilet, fresh water flush (2x) Washbasin in front and aft cabin toilet-compartment, built into vanity unit. Corian work tops in toilet compartments including integrated corian wash basin Complete luxury shower installation in front and aft cabin, with Corian shower tray and drainage pump. Selected bathroom fittings (mirror, toilet paperholder etc.) Tabs in chromium Shower curtain in shower aft cabin an front cabin Linssen Yachts, thermostatic controlled, warm water heating with convector heaters in all compartments and design radiator in wet cel aft and front cabin. Heavy duty stainless steel windscreen wipers SB, middle and port Manual anchor winch with integrated Heavy Duty stainless steel anchor rollers and anchor rail. With 40m. 8 mm. anchor chain and 15kg. Bruce-anchor. Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box in impact resistance ABS, fitted in saloon cupboard Fire extinguishers (2 kg) in aft cabin, saloon, galley and wheelhouse Techncal details 19

20 Linssen Grand Sturdy 500 Variotop Mark II De Luxe Hydrolubricated propeller shaft installation, waterproof and low vibration fitted with rubber clampseals into the steel outside tube. Stainless steel propeller shaft with AISI-316 in rubber bearings, Ø 40 mm Engine/shaft connection through homocinetic coupling and thrust bearing Special 4-bladed propellers (for less noise and vibration) Anodes depending on cruising area Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system (patented). Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Centre floor hatches in saloon hinged with gas pressurized cylinders for easy inspection from filters and entrance engine compartment by steps DUAL CROSS engine beds Hydraulic power steering Emergency steering installation (single engine only) Teak / stainless steel steering wheel ø700mm Fuel tank of advanced design with inspection-/ cleaning hatch, (approx ltr.) Separate second (1x on engine) fuel filter with water separator (2x) Copper fuel pipe Fuel gauge Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 960 ltr.) Water tank gauge Automatic pump for water system Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Electric bilge installation placed in bilge aft cabin, front cabin and engine room. Equipped with float switch and changeover switch for manual or automatic operation for pumping and alarm Holding tank (toilet(s)) incl. Dockside-Discharge connection (approx. 480 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 3 main groups: engine (2x 50 Ah), domestic (6x 120 Ah) and generator (1x 50 Ah) 12 V. Sockets 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Fully automatic battery charger (1x 75 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Inverter 24V/1500 W. Linssen Variotop ; hydraulicly operated double lined and insulated convertible roof, that closes the wheelhouse watertight through a unique patented closing system Exterior finish Three-part teak doors for wheelhouse, the BB door is fixed and the middle and SB door can be opened Solid Linssen pvc fendering around swimming platform Original Linssen synthetic fiber rope fender with stainless steel stretcher ø120mm Teak deck box joint Linssen Grand Sturdy 500 logo on super structure; chromium In s t r u m e n t s Engine instruments (2x): rev. counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Linssen Yachts navigation package: - Raymarine ST-60 Tridata Additional VDO Voltmeter for 24V domestic circuit 20

21 Linssen Grand Sturdy 500 Variotop Mark II Royal Co at i n g Linssen Yachts Exterior Coating System Anti-slip coating on cabin deck and saloon deck Non-toxic antifouling Additional protective easy-to-clean coating in engine compartment Additional isolating coating in the wheelhouse Original Linssen Grand Sturdy color scheme: - Superstructure and hull: Linssen Sand Beige - Waterline: British Racing Green - Antifouling: Black Windows and ventilation All windows in anodised aluminium profiles Aluminium dropping window in saloon, at port side Aluminium dropping window in saloon, at starboard side. Aluminium opening portholes in the front cabin (4x) and aft cabin (6x) with plain glass, profile in hull color All windows of tinted glass (portholes in plain glass) All windows of toughened glass Double-glazed windows (Thermic Line) in all windows (the dropping windows are single-glazed) Aluminium ventilation-/escape hatch with tinted glass in forward coachroof (3x), incl. curtain Aluminium escape hatch in aft cabin Permanent ventilation in toilet-/shower compartments Railing and deck fittings Polished stainless steel sea rail. Bow opening lockable by means of integrated stainless steel bar Integrated stern door (SB/Port) to swimming platform Integrated winding steps on SB and port side in transom, from swimming platform Stainless steel hinged side ladder integrated in side deck rail (Port and Starboard) Polished stainless steel swimming ladder at bathing platform incl. solid teak steps with non skid profiles Integrated swimming platform Polished stainless steel bollards: Foredeck and at the stern 2x double, midships-front and midships-stern 2x single Stainless steel bollards on bathing platform (2x) Handrail package: Handrails on saloon deck, cabin deck, Variotop arch and at the bathing ladder Extended bathing platform (including teak). Length o.a. will be 15,75 m instead of standard length from 14,98 m Solid Linssen pvc fendering from swimming platform to 1/3 of the hull length. Stainless steel protection set at bollards front/middle/ aft and at railing entrances in side decks. Aluminium Linssen design mast Sand Beige with crosstrees and stays Hydraulic mast folding system incl. control at steering position Integrated moulded aft deck dodgers. Integrated deck boxes, U-shaped aft bench with teak deck box joint. Cushions for the bench in imitation leather, colour cream. Teak table with folding section on aft deck Provisions in hull for hydraulic passerelle Interior finish Exclusive Linssen Yachts Mark II interior The wheelhouse is entirely cherry-timbered Storage in the dashboard for binoculars, digital maps, sunglasses, keys, cell phone etc. Deckhead lining of elegant finish with panels Interior in all compartments finished in cherry wood with inlaid Wenge-frames in all cupboards and drawers Anatomically moulded dinette-/ saloon settees, finished in leather, 2 club chairs in saloon port side (only with layout K2) Anatomically moulded settee in wheelhouse, finished in leather Curtains for all windows and ventilation-/escape hatches Two Stools cherry wood/leather, integrated under berth aft cabin (only layout A4) Original teak ship s floor with inlaid ash striping in all compartments Interior wardrobe in front cabin with lights Interior wardrobe in aft cabin with lights Interior provided with chromium / stainless-steel design fittings Door and locker furniture with push buttons Elegant solid wooden stair post with high polished stainless steel hand rail Luxury walnut wood dashboard with real saddlestitched leather trim Luxury saloon and dinette table with stainless steel fixed design support Comfortable electric adjustable Linssen design helmseat, with matching leather upholstery. Horizontally manual adjustable Two halogen reading lights in aft cabin and forward cabin Attractive bar in saloon including Linssen Yachts glasses Linssen Yachts crockery set for 6 persons Stairs lighting Galley cupboard with drawers Spacious hanging-locker in forward cabin and aft cabin Wastebucket integrated in the pantry Cutlery tray in galley Bedtop in aft cabin hinged with gas pressurized cylinders, for easy access storage space / technical equipment under berth (only layout A4) Special slatted and sprung matrass bases in aft cabin and front cabin Mattresses in aft cabin, front cabin and guest cabin (layout O3) type Combi-spring 14cm Solid high polished stainless steel handrail at stairs to aft cabin Grab rail along front of galley (chromium) Wooden handrail on saloondeck (mid-ships) Eq u i p m e n t Electric refrigerator 110 l. with freezer compartment in galley Ceramic hob, stainless steel, 240V. 2x 1200 W. cooking zone 1x 2000 W. cooking zone 1x 2200 W. cooking zone Corian worktop in galley incl. stainless steel sink (1 1/2 model) Microwave/oven/grill 32 ltr. (stainless steel) in galley. Temperature range degrees. Microwave power W (240 V) Extractor with revolution regulator (240 V). Incl. 2x light points above hob integrated in wooden pillar Electrical toilet, fresh water flush (2x) Washbasin in front and aft cabin toilet-compartment, built into vanity unit. 21

22 Linssen Grand Sturdy 500 Variotop Mark II Royal Corian work tops in toilet compartments including integrated corian wash basin Complete luxury shower installation in front and aft cabin, with Corian shower tray and drainage pump. Selected bathroom fittings (mirror, toilet paperholder etc.) Tabs in chromium Shower door in shower aft cabin an front cabin Outside shower at bathing platform, flush mounted with warm- and cold water tap Linssen Yachts, thermostatic controlled, warm water heating with convector heaters in all compartments and design radiator in wet cel aft and front cabin. Heavy duty stainless steel windscreen wipers SB, middle and port with fresh water spray-installation Hydraulic anchor winch (1500W) above deck with integrated heavy duty stainless steel anchor rolls, anchor rail and mooringfacility. With 50m. 10mm. galvanised anchor chain and 30 kg. galvanised Bruceanchor Deck lighting with 2 lights in mast Stair lighting to bathing platform and in steps from side decks to aft deck. Stereo radio/cd changer incl.2 speakers in saloon and amplified radio antenna Set speakers in steering position Provisions for tv-antenna, antenna cable to mast Spares-kit including tool-kit, V-belts, impeller, fuses, bulbs, paint-tips and various maintenance parts Complete inventory including fenders, mooring ropes, boathook, life buoy, bucket, scrubbing brush, national flag, yard burgee, safety rope for anchor chain and anchor ball Automatic sprinkler system in engine room. Equipped with extinguish gas (clean, no residue, ecological) First-aid box in impact resistance ABS, fitted in saloon cupboard Fire extinguishers (2 kg) in aft cabin, saloon, galley and wheelhouse Techncal details Hydrolubricated propeller shaft installation, waterproof and low vibration fitted with rubber clampseals into the steel outside tube. Stainless steel propeller shaft with AISI-316 in rubber bearings, Ø 40 mm Engine/shaft connection through homocinetic coupling and thrust bearing Special 4-bladed propellers (for less noise and vibration) Anodes depending on cruising area Super sound insulation package for engine room, consisting of a sound absorbent insulation and a non vibration package FIS -system (patented). Floor Integrated System for integral protected loop-up of cables and ductings in the engine compartment Centre floor hatches in saloon hinged with gas pressurized cylinders for easy inspection from filters and entrance engine compartment by steps DUAL CROSS engine beds Hydraulic power steering Emergency steering installation (single engine only) Teak / stainless steel steering wheel ø700mm Electronic controls Mathers Micro Commander (chromium) Provisions for stern thruster; ducting mounted in stern including hydraulic pipes Hydraulic bow thruster 160 kgf (9,5 kw / 13 HP) Provisions for easily afterwards installation from stabilizers to prevent rolling of the ship; 2 mounting flanges welded in the hull Fuel tank of advanced design with inspection-/ cleaning hatch, (approx ltr.) Separate second (1x on engine) fuel filter with water separator (2x) Copper fuel pipe Fuel gauge Generator 240V/7 kw, Intercooling, continous rating. Integrated in shore power connection. Remote control, Volt-, Herz-, Amp. and Rev. counter meter. Incl. water-/gas separator for generator exhaust Automatic water pressure system, incl. solid pvc watertank with inspection-/cleaning hatch. (approx. 960 ltr.) Water tank gauge Automatic pump for water system Hot water system, calorifier 50 ltr. 240 V / 750 W immersion heater in calorifier Deck wash pump incl. water hose and spray-pistol Electric bilge installation placed in bilge aft cabin, front cabin and engine room. Equipped with float switch and changeover switch for manual or automatic operation for pumping and alarm Holding tank (toilet(s)) incl. Dockside-Discharge connection (approx. 480 ltr.) Holding tank waste pump out unit for Direct Discharge Holding tank level indicator Main fuse incorporating automatic cut-out Maintenance free batteries divided into 3 main groups: engine (2x 50 Ah), domestic (6x 120 Ah) and generator (1x 50 Ah) 12 V. Sockets 240V / 16A shore power connection, acc. CE norm with fuses, 240V. sockets etc. 240V. shore power cable Fully automatic battery charger (1x 75 A.), with control panel to monitor the charge process and potentiometer to adjust the charge current Inverter 24V/1500 W. Engine room lighting with switch and indicator in switch panel Linssen Variotop ; hydraulicly operated double lined and insulated convertible roof, that closes the wheelhouse watertight through a unique patented closing system Hydraulically controlled collapsible parking arch for the Variotop. Can be lowered to reduce the maximum airdraft to approx. 350 cm. Exterior finish Three-part teak doors for wheelhouse, the BB door is fixed and the middle and SB door can be opened Original Linssen teak deck on fore deck, side decks, aft deck, incl. teak steps of side decks to the aft deck Original Linssen teak deck on swimming platform and stairs to aft deck Solid Linssen pvc fendering around swimming platform 22

23 Linssen Grand Sturdy 500 Variotop Mark II Royal Original Linssen synthetic fiber rope fender with stainless steel stretcher ø120mm Ships name on bow and stern. Port of registry and registration number on stern Teak deck box joint Solid teak table with folding section on aft deck. Linssen Grand Sturdy 500 logo on super structure; chromium In s t r u m e n t s Engine instruments (2x): rev. counter, voltmeter with alarm, temperature gauge with alarm, oil pressure gauge with alarm, ignition key and engine hour meter Government approved navigation lights Compressor horn Linssen Yachts Lake navigation package, existing: - Raymarine ST-60 Tridata - Compass incl. ST-60 transducer - Raymarine autopilot with ST-6001 display - DSC VHF installation - C80, 8.4 colour LCD chart plotter at steering position incl. Raystar 120 GPS/SD sensor Including Navionics Gold XL9 marine chart type 28XG Additional VDO Voltmeter for 24V domestic circuit Canvas and covers Cover for Variotop 23

24 All yachts of the Linssen Grand Sturdy series include the 3 Years Linssen Yachts Warranty-plan and comprehensive delivery package consisting of full fuel tanks, testing and adjusting all the fitted accessories and navigation instruments, carrying out a full handover programme, with detailed technical instruction, during delivery at the factory. Comprehensive selection of instruction manuals including ships papers (owner manual, systemdiagramms, drawings etc.), spare parts package with touch up paint, waste tank liquid, spare bulbs etc. Detailed information about the entire Linssen Yachts collection is available at the shipyard or from your local agent. The interior and exterior drawings, the fitting out schedule and the basic information supplied are subject to change at any time without prior notice. The illustrations may show special features which are not included in our standard package. Please check with the Boatyard or your local Linssen representative. The information given in our documentation has been compiled with the utmost care. Please take into account, however, that every Linssen is built according to a specific fitting-out programme, layout and composition, and that the standard specification may be subject to change at any time without prior notice. The performance data for all Linssen yachts are given in good faith, but no single case can be guaranteed for any type of boat/ engine. The condition of the propellers, plant and algea growth below the waterline, the condition of the engines, the water temperature, the ambient air temperature, the weight of the fuel and on-board water and the weight of the supplies on board will affect the way your boat behaves. Definitive performance guarantees are therefore impossible. Linssen Ya c h t s B.V. Brouwersstraat 17, Postbus 7172, NL-6050 AD Maasbracht Tel. +31 (0) , Fax +31 (0) info@linssenyachts.com Maasbracht, SE&O - Version 16,

Fitting out schedule. Linssen Grand Sturdy 9 -series AC / Sedan 33.9 AC / Sedan 34.9 AC / Sedan 40.9 AC / Sedan 45.9 AC.

Fitting out schedule. Linssen Grand Sturdy 9 -series AC / Sedan 33.9 AC / Sedan 34.9 AC / Sedan 40.9 AC / Sedan 45.9 AC. Fitting out schedule Linssen Grand Sturdy 9 -series 29.9 AC / Sedan 33.9 AC / Sedan 34.9 AC / Sedan 40.9 AC / Sedan 45.9 AC English Linssen Grand Sturdy 29.9 AC / Linssen Grand Sturdy 29.9 Sedan Basic

More information

285 PILOT STANDARD EQUIPMENT TECHNICAL SPECIFICATIONS

285 PILOT STANDARD EQUIPMENT TECHNICAL SPECIFICATIONS 23 24 25 26 STANDARD EQUIPMENT CONSTRUCTION Designed by John R. Moxham Deep V forward, 23 dead rise aft Hand laid GRP with E-glass Biaxial combination (0/90/mat) with isophthalic gel coat and isophthalic

More information

SEALINE F42-5 NAUTI BUOY

SEALINE F42-5 NAUTI BUOY JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com SEALINE F42-5 NAUTI BUOY GBP 139,950 INC TAX MAIN CHARACTERISTICS Year: 2003 Hull Colours:

More information

Steel Explorer Yacht 22 Meters

Steel Explorer Yacht 22 Meters Steel Explorer Yacht 22 Meters 1 MAIN PARTICULARS Length hull 21.76 m Length waterline 20,63 m Beam 5.80 m Draft 1.40 m Diesel approx 12.000 Liter Fresh water approx 2500 Liter Waste water approx 800 Liter

More information

SEALINE F37 WEST ONE

SEALINE F37 WEST ONE JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com SEALINE F37 WEST ONE GBP 109,950 INC TAX MAIN CHARACTERISTICS Year: 2001 Hull Colours: White

More information

SEALINE S34. JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0) GBP 48,950 INC TAX

SEALINE S34. JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0) GBP 48,950 INC TAX JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com GBP 48,950 INC TAX MAIN CHARACTERISTICS Year: 2003 Hull Colours: White Lying: Gouvia, Corfu

More information

FOUNTAINE PAJOT MY37 INVENTORY PREMIUM a. Motor Yacht 37

FOUNTAINE PAJOT MY37 INVENTORY PREMIUM a. Motor Yacht 37 Motor Yacht 37 General specifications Length overall... 11 m / 36. 1ft Beam overall... 5.1 m / 16.8 ft Draft... 0.8 m / 2.6 ft Air clearance... 3.78 m / 12.4 ft Displacement... 8.9T Standard power... VOLVO

More information

COMMANDER The Yachtsman s Yacht

COMMANDER The Yachtsman s Yacht COMMANDER The Yachtsman s Yacht STOREBRO 435 COMMANDER TECHNICAL SPECIFICATION MAIN CHARACTERISTICS Length: 13.2 m /43 ft 4 in Beam (B max): 3.9 m /12 ft 10 in Draft: 0.9 m /3 ft Displacement: approx.

More information

34 FLY 8

34 FLY 8 7 34 SEDAN 34 FLY 8 9 34 34 10 11 34 STANDARD EQUIPMENT CONSTRUCTION Designed by Viking Marin Team Deep V forward: 18 dead rise aft Hand laid GRP with mat and Roving with isophthalic gel coat and isophthalic

More information

MOTORBOOT - BOARNCRUISER 42 NEW LINE - SALUDA

MOTORBOOT - BOARNCRUISER 42 NEW LINE - SALUDA MOTORBOOT - BOARNCRUISER 42 NEW LINE - SALUDA General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Boarncruiser 42 New Line Saluda E2044 12.80 x 4.20 x 1.15 m ca. 2.70 m (with

More information

Z44H #019 specification Color: Royal Nights Blue Deck: Biscuit / White Seam Model Year: 2013

Z44H #019 specification Color: Royal Nights Blue Deck: Biscuit / White Seam Model Year: 2013 Z44H #019 specification Color: Royal Nights Blue Deck: Biscuit / White Seam Model Year: 2013 Principal characteristics Builder: Design: Design interior: Engineering: Sound & Vibration Control: Length overall:

More information

MY 44 GENERAL CHARACTERISTICS:

MY 44 GENERAL CHARACTERISTICS: MAESTRO MY 44 GENERAL CHARACTERISTICS: LOA:... 13.40 m / 44 ft Bmax:... 6.61 m / 21.7 ft Draft:... 1.30 m / 4.30 ft Air clearance incl. mast:... 6.10 m / 20.00 ft Air clearance (fly bridge fittings removed):...

More information

Technical Information Boarncruiser Classic Line BC 35 BC 38 BC 40 BC 43 BC 46 BC 50 BC 55

Technical Information Boarncruiser Classic Line BC 35 BC 38 BC 40 BC 43 BC 46 BC 50 BC 55 Technical Information Boarncruiser Classic Line BC 35 BC 38 BC 40 BC 43 BC 46 BC 50 BC 55 General Data Length overall 10.50 m 11.40 m 12.40 m 13.25 m 14.00 m 14.95 m 16.85 m Beam 3.65 m 4.05 m 4.35 m 4.45

More information

Hunton XRS43. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0)

Hunton XRS43. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0) Hunton XRS43 Martin Payne Marine - Tel: +44 (0)23 8020 7750 - Mob: +44 (0) 7973 344942 - Email: sales@martinpaynemarine.com Hunton XRS43 Monaco 249,950 inc Vat A very rare opportunity to own a "Sahara"

More information

MOTORBOOT - VAN DER HEIJDEN DYNAMIC DELUXE 1400

MOTORBOOT - VAN DER HEIJDEN DYNAMIC DELUXE 1400 MOTORBOOT - VAN DER HEIJDEN DYNAMIC DELUXE 1400 General Brand: Van der Heijden Dynamic Deluxe 1400 Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Dreamer B1144 14.00 x 4.50 x 1.30

More information

78,500 Tax Paid. Sealine F33. over 700 boats listed DARTMOUTH OFFICE OFFICES THROUGHOUT THE UK AND EUROPE

78,500 Tax Paid. Sealine F33.   over 700 boats listed DARTMOUTH OFFICE OFFICES THROUGHOUT THE UK AND EUROPE DARTMOUTH OFFICE OFFICES THROUGHOUT THE UK AND EUROPE Sealine F33 Year: 2002 Heads: 1 Location: Dartmouth, Devon Cabins: 2 LOA: 33' 11" (10.34m) Berths: 6 Beam: 11' 0" (3.35m) Keel: Deep V Min Draft: 3'

More information

STANDARD SPECIFICATION. privilege-marine.com 1

STANDARD SPECIFICATION. privilege-marine.com 1 1 LOA 15.24 m 50' Hull length 15.24 m 50' LWL 15.13 m 49'6" Beam 7.98 m 25'3" Draft 1.10 m 3'8" (TBC) Displacement light ship 20 t 44,092 lbs (TBC) Displacement full load 25 t 59,525 lbs (TBC) Fuel tank

More information

Beneteau Swift Trawler 42. Price: 169,900

Beneteau Swift Trawler 42. Price: 169,900 Beneteau Swift Trawler 42 Network ID 2111 Year 2007 Hull Material GRP Fuel Diesel Location Essex Power/Sail Powerboat Engines 2 Engine Hrs Port 500 Engine Hrs Std 500 Construction GRP LOA 44' 7" (13.60m)

More information

Colibri. Specifications $ 320,000. Boat Details

Colibri. Specifications $ 320,000. Boat Details Colibri $ 320,000 Specifications Boat Details Price $ 320,000 Boat Brand Austin Parker Model 42' SPORT Length 12.50 Year 2010 Category Commercial Boats Hull Style Single Hull Type Fibreglass Power Type

More information

MOTORBOOT - BOARNCRUISER 40 CLASSIC LINE - FREEDOM

MOTORBOOT - BOARNCRUISER 40 CLASSIC LINE - FREEDOM MOTORBOOT - BOARNCRUISER 40 CLASSIC LINE - FREEDOM General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Boarncruiser 40 Classic Line Freedom B1119 12.40 x 4.35 x 1.10 m ca.

More information

Targa 31 Mk11 Flybridge Bluebird

Targa 31 Mk11 Flybridge Bluebird Targa 31 Mk11 Flybridge Bluebird Make: Model: Length: Targa 31 Mk11 Flybridge 10.14 m Price: EUR 124,000 Year: 2006 Condition: Used Boat Name: Hull Material: Draft: Number of Engines: 2 Fuel Type: Bluebird

More information

SPECIFICATION SHEET (V )

SPECIFICATION SHEET (V ) Ambassador 32 Runabout Series SPECIFICATION SHEET (V20040524) Basic Dimensions Length : 32 8 (9.80 m) Length Waterline : 25 10 (7.87 m) Beam : 10 8.5 (3.25 m) Draft : 1 6 (0.46 m) Weight : 8800 lbs approx.

More information

SPECIFICATION TYPHOON 37 COUPÉ

SPECIFICATION TYPHOON 37 COUPÉ SPECIFICATION TYPHOON 37 COUPÉ Onderweg 10. 5368 LA Haren (NB). The Netherlands. T +31(0)412-462259. F+31(0)412-462289. info@ceelenbekker.com. www.ceelenbekker.com T 3 7 C S p e c i f i ca t i o n S h

More information

JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0) FAIRLINE TARGA 34 GBP 99,950 INC TAX

JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0) FAIRLINE TARGA 34 GBP 99,950 INC TAX JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com FAIRLINE TARGA 34 FABIA GBP 99,950 INC TAX MAIN CHARACTERISTICS Year: 1999 Hull Colours: Blue

More information

F//LINE Model Year Standard Specification. Principal Dimensions. Engines & Performance. Length overall: 32 9 (9.99m)

F//LINE Model Year Standard Specification. Principal Dimensions. Engines & Performance. Length overall: 32 9 (9.99m) 2019 Model Year Standard Specification Principal Dimensions Length overall: 32 9 (9.99m) Fuel capacity: 150 gallons / 180 US gallons (680 litres) Beam: 11 6 (3.5m) Draught: 2 10 (0.87m) unloaded Displacement

More information

RANGE CRUISER 815. Comfort equipments Forward sunbed cushions RC 815. jeudi 28 mars 2019 Page 1 sur 15. Remarks. Extra. Std

RANGE CRUISER 815. Comfort equipments Forward sunbed cushions RC 815. jeudi 28 mars 2019 Page 1 sur 15. Remarks. Extra. Std RANGE CRUISER 815 Navigation & Safety Radar mast RC 815 2 sliding wheelhouse doors 1 Stainless steel bow pulpit 1 Wooden tiller control 1 Battery with switch 1 Forward fairlead 2 Compass 1 Infused Fiber

More information

57' (17.37m) UNIESSE

57' (17.37m) UNIESSE 57' (17.37m) UNIESSE LOA: Beam: Min Draft: Max Draft: Speed: 57' 0" (17.37m) 16' 5" (5.00m) Max 4' 9" (1.45m) Year: Builder: Type: Price: Location: Mfg-2012 Model-2012 UNIESSE Cruiser Sport Cruiser $995,000

More information

Hunton XRS37. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0)

Hunton XRS37. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0) Hunton XRS37 Martin Payne Marine - Tel: +44 (0)23 8020 7750 - Mob: +44 (0) 7973 344942 - Email: sales@martinpaynemarine.com Hunton XRS37 Spain 80,000 ex Vat This Hunton Powerboats XRS37 is for true Petrol

More information

CRANCHI ZAFFIRO 34 PIPE DREAM

CRANCHI ZAFFIRO 34 PIPE DREAM JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com CRANCHI ZAFFIRO 34 PIPE DREAM GBP 74,950 INC TAX MAIN CHARACTERISTICS Year: 2002 Hull Colours:

More information

MOTORBOOT - BOARNCRUISER 35 CLASSIC LINE - BILLABONG

MOTORBOOT - BOARNCRUISER 35 CLASSIC LINE - BILLABONG MOTORBOOT - BOARNCRUISER 35 CLASSIC LINE - BILLABONG General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Boarncruiser 35 Classic Line Billabong B1112 10.50 x 3.65 x 1.00

More information

Toldilla.

Toldilla. Toldilla LAYOUT MLL 44 Toldilla MENORQUIN LLAÜT 44 TOLDILLA STANDARD EQUIPMENT Valid from 1st September 2010 to 31st August 2011 TECHNICAL CHARACTERISTICS Length in metres*: 8,78 Beam in metres*: 3,03

More information

Make Model Length Price Year Condition. Beneteau Antares 8 25 ft 6 in EUR 43, Used. Hull Material Number of Engines Fuel Type

Make Model Length Price Year Condition. Beneteau Antares 8 25 ft 6 in EUR 43, Used. Hull Material Number of Engines Fuel Type Beneteau Antares 8 Make Model Length Price Year Condition Beneteau Antares 8 25 ft 6 in EUR 43,200 2017 Used Hull Material Number of Engines Fuel Type Fibreglass (GRP) 0 Diesel The new Antares 8 is a rejuvenation

More information

"Argo IV" - Nimbus 320 Coupe

Argo IV - Nimbus 320 Coupe "Argo IV" - Nimbus 320 Coupe Location Ipswich, United Kingdom Build Dimensions Price: 79,950 inc Vat Length: 9.5m / 31.17ft Year: 2004 Beam: 3.22 meter Builder: Nimbus Boats Max Draft: 1.05 meter Construction:

More information

COMM ANDER The Yachtsman s Yacht

COMM ANDER The Yachtsman s Yacht COMM ANDER The Yachtsman s Yacht 475 COMMANDER T E C H N I C A L S P E C I F I C A T I O N MAIN CHARACTERISTICS Length: 14.2 m / 46 ft 5 in Beam: (B max): 4.25m / 13 ft 11 in Draft: 1.00 m / 3 ft 3 in

More information

MOTORBOOT - SUPER FALCON 45 - ENDEAVOUR

MOTORBOOT - SUPER FALCON 45 - ENDEAVOUR MOTORBOOT - SUPER FALCON 45 - ENDEAVOUR General Brand: Super Falcon 45 Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Endeavour B1126 14.10 x 4.25 x 1.20 m ca. 3.45 m Wim van der Valk

More information

PRICE LIST. Excluding VAT

PRICE LIST. Excluding VAT PRICE LIST 2017 Excluding VAT Nordic 38 HT Technical data: Length : 11,56 m Beam: 3,33 m Draught: 1,0 m Weight: 6600 kg Fuel tank: 520 l Water tank: 300 l Waste tank: 75 l CE Cat. B 10 Standard equipment:

More information

clippermotoryachts.com

clippermotoryachts.com HUDSON BAY 390 clippermotoryachts.com HUDSON BAY 390 Specifications Length overall (inc. swim platform & bow roller) 12.9m 42ft Beam OA 4m 13ft Maximum Draft 0.9m 3.0ft Displacement 13,000kg (approx) Fuel

More information

hainesmarine.co.uk Haines 32 Sedan

hainesmarine.co.uk Haines 32 Sedan hainesmarine.co.uk Haines 32 Sedan Haines 32 Sedan HAINES MARINE Unlike mass production builders Haines combine traditional craftsmanship with modern techniques and will tailor a boat to individual requirements.

More information

MOTORBOOT - LINSKENS CATFISH PACIFIC PRINCESS

MOTORBOOT - LINSKENS CATFISH PACIFIC PRINCESS MOTORBOOT - LINSKENS CATFISH 1400 - PACIFIC PRINCESS General Brand: Linskens Catfish 1400 Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Pacific Princess B1159 13.80 x 4.30 x 1.10

More information

AZIMUT 38 MAIN CHARACTERISTICS. Miami. Location: Price: $ Model Year: 2011 Engines hours: Generator hours

AZIMUT 38 MAIN CHARACTERISTICS. Miami. Location: Price: $ Model Year: 2011 Engines hours: Generator hours AZIMUT 38 HULL N. 45 The unit is a second hand motoryacht selected by Azimut Yachts Service Team to guarantee the maximum peace of mind to the future owners searching for a pre-owned vessel. All boats

More information

Length overall (exc. pulpit) fixed platform: 45 7 (13.9m) Length of hull: 42 (12.8m) Beam (inc. gunwale): 14 2 (4.32m) Number of berths: 4-5

Length overall (exc. pulpit) fixed platform: 45 7 (13.9m) Length of hull: 42 (12.8m) Beam (inc. gunwale): 14 2 (4.32m) Number of berths: 4-5 2019 Model Year Standard Specification Principal Dimensions Length overall (exc. pulpit) fixed platform: 45 7 (13.9m) Length of hull: 42 (12.8m) Beam (inc. gunwale): 14 2 (4.32m) Number of berths: 4-5

More information

Principal Dimensions. Length overall (incl. pulpit) 58ft 8in (17.88m) Hull length. 57ft 4in (17.48m) Beam. 15ft 3in (4.65m) Draft

Principal Dimensions. Length overall (incl. pulpit) 58ft 8in (17.88m) Hull length. 57ft 4in (17.48m) Beam. 15ft 3in (4.65m) Draft PRINCESS V57 NEW Standard Equipment Power-assisted steering system Bowthruster (120 kgf/265 lbf) 24v DC/240v AC electrical system 220v/240v generator (7kW) 240v shore power with 80-amp float battery charger

More information

RANGE CRUISER 815. Comfort equipments. mercredi 10 mai 2017 Page 1 sur 18. Remarks. Std. Extra

RANGE CRUISER 815. Comfort equipments. mercredi 10 mai 2017 Page 1 sur 18. Remarks. Std. Extra RANGE CRUISER 815 Navigation & Safety Dual batteries with over switch 1 2 sliding wheelhouse doors 1 Stainless steel bow pulpit 1 Wooden tiller control 1 Battery with switch 1 Forward fairlead 2 Compass

More information

Hunton XRS37. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0)

Hunton XRS37. Martin Payne Marine - Tel: +44 (0) Mob: +44 (0) Hunton XRS37 Martin Payne Marine - Tel: +44 (0)23 8020 7750 - Mob: +44 (0) 7973 344942 - Email: sales@martinpaynemarine.com Hunton XRS37 Ibiza Spain 99,950 inc Vat Hunton XRS37 "Remedy" has been in Ibiza

More information

Lobster (GRP) Price: EUR 580,000

Lobster (GRP) Price: EUR 580,000 Lobster 65 Make: Model: 65 Length: Lobster 19.95 m Price: EUR 580,000 Year: 2013 Condition: Used Hull Material: Draft: Number of Engines: 2 Fuel Type: Beam: Fibreglass (GRP) 1.52 m Diesel 5.03 m Yachts

More information

Nord West 420 Flybridge. 289,950 VAT Paid. Specification

Nord West 420 Flybridge. 289,950 VAT Paid. Specification Specification +44 01702 258885 Email: sales@boats.co.uk Stock number: Manufacturer: Model: Year: Price: Location: EB1780 Nord West 420 Flybridge 2007 289,950 VAT Paid Essex Marina 2007 Nord West 420 Flybridge

More information

42 Elegance FORWARD CABIN MASTER CABIN MID AFT CABIN DECKS

42 Elegance FORWARD CABIN MASTER CABIN MID AFT CABIN DECKS W W W. H A I N E S M A R I N E. C O. U K Unlike mass production builders Haines combine traditional craftsmanship with modern techniques and will tailor a boat to individual requirements. Designed to cater

More information

Barracuda 9. Inventory list GENERAL SPECIFICATIONS ARCHITECT / DESIGNERS EC CERTIFICATE PATENT AIR STEP

Barracuda 9. Inventory list GENERAL SPECIFICATIONS ARCHITECT / DESIGNERS EC CERTIFICATE PATENT AIR STEP GENERAL SPECIFICATIONS L.O.A: 8,91 m 29 3 Hull length: 7,98 m 26 2 Overall width: 2,96 m 9 9 Beam: 2,93 m 9 7 Light displacement (EC): 3 441 kg 7,584 lbs Light displacement without engine: 2 849 kg 6,279

More information

2005 Sunseeker 75 Yacht

2005 Sunseeker 75 Yacht 2005 Sunseeker 75 Yacht POA Specifications Boat Details Price POA Boat Brand Sunseeker Model 75 YACHT Length 22.86 Year 2005 Category Motor Yachts Hull Style Single Hull Type GRP Power Type Power Stock

More information

MOTORBOOT - BOARNCRUISER 42 RETRO LINE - Jason II

MOTORBOOT - BOARNCRUISER 42 RETRO LINE - Jason II MOTORBOOT - BOARNCRUISER 42 RETRO LINE - Jason II General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Boarncruiser 42 Retro Line Jason II B1095 12.85 x 4.30 x 1.15 m 2.50

More information

Broom 395. Location Southampton, United Kingdom. Dimensions

Broom 395. Location Southampton, United Kingdom. Dimensions Broom 395 Location Southampton, United Kingdom Builder/Designer Price: 454000 Year: 2018 Construction: GRP Dimensions Length: Beam: Max Draft: 11.89m / 39.6ft 1.1m / 3.6 feet 3.96m / 13 feet Specification

More information

Length overall (inc. pulpit) fixed platform: 49 2 (15.0m)

Length overall (inc. pulpit) fixed platform: 49 2 (15.0m) 2018 Model Year Standard Specification Principal Dimensions Length overall (inc. pulpit) fixed platform: 49 2 (15.0m) Length overall (exc. pulpit) fixed platform: 48 6 (14.8m) Length overall (inc. pulpit)

More information

Aquila 36. Builder: Design & Styling: Concept:

Aquila 36. Builder: Design & Styling: Concept: www.aquilaboats.com Worldwide Sales +1 (813) 579-1720 Aquila 36 Builder: Design & Styling: Concept: Provisionary Specifications Length overall with swim platform excl anchor roller Hull length Beam overall

More information

1930 (63 ) NINE TALES

1930 (63 ) NINE TALES 1930 (63 ) NINE TALES General Specifications Length Overall: 63 (18.85M) Length Waterline: 62 (18.55M) Beam: 24.5 (7.45M) Draft: 4 (1.25M) Displacement: Approx 25,000 KG / 441,000 lbs Hulls & Deck: PVC

More information

AQUILA 36 POWER CATAMARAN. 6 (2 in salon) Sleeps (up to) Length overall with swim platform 36.0 / M.

AQUILA 36 POWER CATAMARAN.   6 (2 in salon) Sleeps (up to) Length overall with swim platform 36.0 / M. 36 AQUILA 36 POWER CATAMARAN Length overall with swim platform Sleeps (up to) 6 (2 in salon) (excluding anchor roller) 36.0 / 10.96 M Comfortably seats 26 Hull length 32.07 / 9.94 M Cabins 2 Beam overall

More information

Exhibit A 2005 Cumberland 44 JOLIE BLON

Exhibit A 2005 Cumberland 44 JOLIE BLON Page : 1 Exhibit A 2005 Cumberland 44 JOLIE BLON Basic Vessel Summary Manufacturer: FOUNTAINE PAJOT Model: Cumberland 44 Year Built: 2005 Model Year: 2005 Type of Yacht: Power Price: $699,000 Condition:

More information

Motorboot - Barkas OK - Dubhe

Motorboot - Barkas OK - Dubhe Motorboot - Barkas 11.50 OK - Dubhe General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Barkas Bouma 11.50 OK Dubhe B1088 11.50 x 3.95 x 0.92 m 2.37 m Bouma Jachtbouw, Harlingen

More information

PRICE LIST FOR INDIVIDUAL CLIENTS

PRICE LIST FOR INDIVIDUAL CLIENTS PRICE LIST FOR INDIVIDUAL CLIENTS Excluding VAT Nordic 38 HT Technical data: Length : 11,56 m Beam: 3,33 m Draught: 1,0 m Weight: 6600 kg Fuel tank: 520 l Water tank: 300 l Waste tank: 75 l CE Cat. B 10

More information

Standard specification: Greenline Ocean Class 70

Standard specification: Greenline Ocean Class 70 Standard specification: Greenline Ocean Class 70 A13 Structure All structural elements of the boat correspond to the CE rules for Category A A two year guarantee on structure and against osmosis Hull is

More information

Sessa C30. Location Unknown, United Kingdom. Dimensions

Sessa C30. Location Unknown, United Kingdom. Dimensions Sessa C30 Location Unknown, United Kingdom Builder/Designer Price: 67500 Year: 2006 Construction: GRP Dimensions Length: Beam: Max Draft: 9.14m / 30ft 2.77m / 9.1 feet 1.01m / 3.3 feet Engine Number of

More information

Princess V52 PRINCESS V52

Princess V52 PRINCESS V52 PRINCESS V52 PRINCESS V52 Princess V52 The very latest in sports yacht technology and Princess unique deep-v hull give the V52 the perfect mix of agility, performance and flexible on-board comfort. With

More information

RODMAN 38 IPS BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT

RODMAN 38 IPS BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKER'S COMMENTS ''This Rodman 38 IPS is carried out with two Volvo Penta D6 diesel engines and IPS drives! The interior is carried out with

More information

LINSSEN 36 SL SELECT MOTOR YACHT SOLD

LINSSEN 36 SL SELECT MOTOR YACHT SOLD HERITAGE, VINTAGE AND CLASSIC YACHTS +44 (0)1202 330 077 LINSSEN 36 SL SELECT MOTOR YACHT 1992 - SOLD Specification SUNDANCE LINSSEN 36 SL SELECT MOTOR YACHT 1992 Designer Jos Linssen Length waterline

More information

AZIMUT 60 HULL N. 312

AZIMUT 60 HULL N. 312 AZIMUT 60 HULL N. 312 The unit is a second hand motoryacht selected by Azimut Yachts Service Team to guarantee the maximum peace of mind to the future owners searching for a pre-owned vessel. All boats

More information

"Sealine SC47" - Sealine SC47

Sealine SC47 - Sealine SC47 "Sealine SC47" - Sealine SC47 Location Hamble close to Southampton, United Kingdom Builder/Designer Year: 2010 Boat Name: Sealine SC47 Construction: GRP Dimensions Length: 14.3m / 45.93ft Beam: 4.48m /

More information

VRI-JON 42 OK BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT

VRI-JON 42 OK BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKER'S COMMENTS ''This Vri-Jon 42 OK is a good choice for those looking for a classic and timeless built motor yacht. Living on board takes

More information

3ft 9in (1.14m) 13ft 6in (4.11m)

3ft 9in (1.14m) 13ft 6in (4.11m) High-performance thrills. High-level comfort. The V48 Open delivers performance, efficiency and exceptional handling, both at sea and in the marina utilising Volvo IPS. Plus, the ultimate open boating

More information

TUNA 40 SPORTIVO BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT

TUNA 40 SPORTIVO BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKER'S COMMENTS ''This one owner Tuna 40 Sportivo is a true wonder of space utilisation. Fitted with a large comfortable cockpit, an enclosed

More information

Princess V39. Elegant and exhilarating. The perfect compact sports cruiser if you demand the ultimate in style, performance and craftsmanship.

Princess V39. Elegant and exhilarating. The perfect compact sports cruiser if you demand the ultimate in style, performance and craftsmanship. Elegant and exhilarating. The perfect compact sports cruiser if you demand the ultimate in style, performance and craftsmanship. The spacious teak-laid cockpit provides generous u-shaped seating, a dining

More information

Standard Specification PRELIMINARY. Rev

Standard Specification PRELIMINARY. Rev Standard Specification PRELIMINARY Rev 3. 2018-01-15 Main Characteristics Length Overall m. (L.O.A.) 26,735 Length of Hull m. 23,95 Length of Water Line m. (L.W.L.) N/A Beam Max m. 7,1 Draft m. N/A Displacement

More information

Ex German Navyvessel 82'

Ex German Navyvessel 82' Doeve Brokers and Valuers vof Sworn & EMCI Certificated Brokers & Valuers S&P Yachts & Ships Westhavenkade 87c NL - 3133 AV Vlaardingen Tel Mobile +31 (0)10 248 98 30 +31 (0)653 20 20 84 E-mail Website

More information

Leopard 37 Power Catamaran

Leopard 37 Power Catamaran Leopard 37 Power Catamaran Builder : Robertson & Caine Length : 36 ft 1 in / 11.13 m Year : 2009/2010 Beam : 14 ft 8 in/ 4.50 m Construction : Fibreglass Draft : 3 ft 2 in/ 0.97 m Engine : Twin Yanmar

More information

Targa 48 GT Model Year Standard Specification. Principal Dimensions. Engines & Performance. Draught: 3 10 (1.17m) unloaded

Targa 48 GT Model Year Standard Specification. Principal Dimensions. Engines & Performance. Draught: 3 10 (1.17m) unloaded 2018 Model Year Standard Specification Principal Dimensions Length overall (inc. pulpit) fixed platform: 49 2 (15.0m) Length overall (exc. pulpit) fixed platform: 48 6 (14.8m) Length overall (inc. pulpit)

More information

Description. Specifications

Description. Specifications 1997 Azimut 54 Description Boat location: Wanssum / The Netherlands This 1997 VAT-Paid Azimut 54 Grande interior has been refitted, upholstery has been renewed with 2018 materials like alcantara, ivory

More information

PRICE GUIDE INCLUDING COMPOSITES STRUCTURE. Self buoyant cored frp composite construction for the hull, deck and superstructures (insulated).

PRICE GUIDE INCLUDING COMPOSITES STRUCTURE. Self buoyant cored frp composite construction for the hull, deck and superstructures (insulated). Blade12 Catamaran LOA 12m Delivery from confirmation of order 24 weeks PRICE GUIDE 275 000 INCLUDING COMPOSITES STRUCTURE Technical Data and Specification Built to Lloyds SSC specification. And MCA code

More information

Motorboot - Succes 1000 Sport - Us Dream

Motorboot - Succes 1000 Sport - Us Dream Motorboot - Succes 1000 Sport - Us Dream General Brand: Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Succes 1000 Sport Us Dream B1083 10.00 x 3.40 x 1.00 m ca. 2.60 m (without sprayhood)

More information

50FT FLEVOWNER CRUISER

50FT FLEVOWNER CRUISER Description off the The flevowner Cruiser 1500 is designed to Wish list embody the cruiser from the beginning. A striking feature of this boat is the attention to detail, some are high - tech, and some

More information

GREENLINE 40 QUINTOPIA

GREENLINE 40 QUINTOPIA GREENLINE 40 QUINTOPIA Dimensions LOA: 11.99 m Beam: 4.25 m Maximum draft: 0.85 m Displacement: 8000 kg unloaded Engines Total Power: 440 HP Starboard and Portside Engine Details: Engine brand: Volvo Penta

More information

42' 2010 Africat 420 Power

42' 2010 Africat 420 Power 42' (12.80m) AFRICAT MARINE LOA: Beam: Min Draft: Max Draft: Speed: 42' 0" (12.80m) 22' 0" (6.71m) Max 4' 0" (1.22m) Cruising 22 knots Max 26 knots Year: Builder: Type: Price: Location: Mfg-2010 Model-2010

More information

SUNSEEKER PORTOFINO 47

SUNSEEKER PORTOFINO 47 JD Yachts 80 The Esplanade Weymouth Dorset United Kingdom DT4 7AA Tel: +44 (0)1305 766 504 sales@jdyachts.com SUNSEEKER PORTOFINO 47 VERY YES GBP 224,950 INC TAX MAIN CHARACTERISTICS Year: 2006 Hull Colours:

More information

Barracuda 7. Inventory list GENERAL SPECIFICATIONS ARCHITECT / DESIGNERS EC CERTIFICATE

Barracuda 7. Inventory list GENERAL SPECIFICATIONS ARCHITECT / DESIGNERS EC CERTIFICATE GENERAL SPECIFICATIONS L.O.A**: 7,39 m 24 3 Hull length: 6,46 m 21 2 Length - max - standard 6,57 m 21 7 Overall width 2,66 m 8 9 Beam: 2,64 m 8 8 Light displacement (EC): 1 877 kg 4,137 lbs Light displacement

More information

"HIGH POINT" - Broom 1070

HIGH POINT - Broom 1070 "HIGH POINT" - Broom 1070 Location Unknown, United Kingdom Builder/Designer Price: 74950 Year: 1989 Boat Name: HIGH POINT Construction: GRP Engine Number of Engines: 2 Make: Nanni Model: 4.390 TDI Power:

More information

SABRE 40 SEDAN BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT

SABRE 40 SEDAN BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKERAGE CHARTER BERTHS FINANCE INSURANCE YACHT MANAGEMENT BROKER'S COMMENTS ''The Sabre 40 Sedan has a modern planning hull despite the classic lines. Sophisticated coring and vacuum-infusion techniques

More information

SPECIFICATION SHEET (V )

SPECIFICATION SHEET (V ) Walkaround 31 Runabout Series SPECIFICATION SHEET (V20031002) Basic Dimensions Length : 31 (9.45 m) Beam : 9 7 (2.96 m) Draft : 1 7 (0.51 m) Depth : 4 0 ( 1.21 m) Length waterline : 26 6½ (8.10 m) Bottom

More information

This is a boat that looks, feels and is indeed a quality product.

This is a boat that looks, feels and is indeed a quality product. This is a boat that looks, feels and is indeed a quality product. Nick Burnham, Practical Boat Owner magazine Sleek lines and elegant interior Modified V hull for dry comfortable ride Lockable wheelhouse

More information

Bayliner 315. Price: 79,995 inc Vat. Boats & Yachts Warranty

Bayliner 315. Price: 79,995 inc Vat. Boats & Yachts Warranty Bayliner 315 Price: 79,995 inc Vat Step on board the Bayliner 315. Oozing space throughout the cockpit with a large U-shape seating area, double rotating helm seat and large port lounger...where to sit

More information

Princess 54 Flybridge

Princess 54 Flybridge Princess 54 Flybridge Make: Model: Length: Princess 54 Flybridge 54 ft 7 in Price: EUR 590,000 Year: 2009 Condition: Used Hull Material: Draft: Number of Engines: 2 Fuel Type: Fibreglass (GRP) 4 ft 9 in

More information

PRINCESS S PRICE: 1,895,000 INC VAT. Ref:PA0443

PRINCESS S PRICE: 1,895,000 INC VAT. Ref:PA0443 2016 PRICE: 1,895,000 INC VAT Ref:PA0443 2016 MODEL SPORTS YACHT FOR SALE FITTED WITH: Twin MAN V12-1800hp diesel engines Steel grey hull Crew cabin fit out Electrically operated sliding sun roof Light

More information

Evo Marine Deauville 76

Evo Marine Deauville 76 Evo Marine Deauville 76 Make: Evo Marine Model: Deauville 76 Length: 23.03 m Year: 2008 Condition: Used Location: Italy Hull Material: Draft: Fibreglass (GRP) 1.8 m Engine Model: C32DITA Engine Hours:

More information

Technical details. Ce Category B -RINA Pleasure Yachts

Technical details. Ce Category B -RINA Pleasure Yachts Ce Category B -RINA Pleasure Yachts Technical details Lenght o.a. 15.25 m Hull lenght 13.45 m Beam 4.12 m Full load draft 1.07 m Ful load displacement 18 t Fuel capacity 2000 lt Water capacity 300 lt Engine

More information

"HIGH POINT" - Broom 10/70

HIGH POINT - Broom 10/70 "HIGH POINT" - Broom 10/70 Location Unknown, United Kingdom Builder/Designer Price: 74950 Year: 1989 Boat Name: HIGH POINT Construction: GRP Dimensions Length: Beam: Max Draft: 10.67m / 35.1ft 3.72m /

More information

PRINCESS 49 DATE OF BUILDING LENGTH (INCL. PULPIT) 15.55m. BEAM 4.34m. DRAFT 1.25m. TWIN VOLVO IPS (2 x 550 HP) WATER CAPACITY

PRINCESS 49 DATE OF BUILDING LENGTH (INCL. PULPIT) 15.55m. BEAM 4.34m. DRAFT 1.25m. TWIN VOLVO IPS (2 x 550 HP) WATER CAPACITY PRINCESS 49 DATE OF BUILDING 2018 LENGTH (INCL. PULPIT) 15.55m BEAM 4.34m DRAFT 1.25m ENGINES FUEL CAPACITY WATER CAPACITY SPEED RANGE TWIN VOLVO IPS (2 x 550 HP) 1850 l 460 l 33-35 knots PRINCESS 49 MOTOR

More information

PRICE: 2.090.000 Euro LOA : 25.76 meters Ferretti Altura 840 BUILDER : Ferretti Yachts HULL LENGTH : 23.97 meters YEAR : 2008 BEAM : 6.12 meters MODEL : Altura 840 DRAFT : 1.92 meters ENGINES : MTU x 2

More information

Beneteau ANTARES 8 OB

Beneteau ANTARES 8 OB Beneteau ANTARES 8 OB Price: 80,239 inc Vat 2019 Model year Beneteau Antares 8 OB with Suzuki DF200APX. Inventory includes Nordic Trim, Electronics pack upgrade, windlass, stereo, toilet & more. Lying

More information

Vision Doeve Brokers. construction year. Netherlands

Vision Doeve Brokers. construction year. Netherlands Doeve Brokers and Valuers vof Sworn & EMCI Certificated Brokers & Valuers S&P Yachts & Ships Westhavenkade 87c NL - 3133 AV Vlaardingen Tel Mobile +31 (0)10 248 98 30 +31 (0)653 20 20 84 E-mail Website

More information

43FEET TWIN SCREW CRUISER SPECIFICATION

43FEET TWIN SCREW CRUISER SPECIFICATION 43FEET TWIN SCREW CRUISER SPECIFICATION Price: $599,000.00 Includes Global Shipping i. 43 YACHT WITH TWIN SCREW AND TWIN HELM STATION, HAVE FWD, AFT & STARBOARD SIDE DOUBLE BERTH CABINS, A SPLIT LEVEL

More information

STANDARD SPECIFICATION EUROPE VERSION

STANDARD SPECIFICATION EUROPE VERSION STANDARD SPECIFICATION EUROPE VERSION DIMENSIONS AND MAIN CHARACTERISTICS Length Overall L OA (Include swim platform exclude anchor roller) Hull Length L H ISO 8666 (Net GRP- Swim Platform Excluded) Waterline

More information

Rodman 41. Prestige Yachts Investment (Yachts Invest) - Jean Lacombe. Prestige Yachts Investment, La Croisette, Port Canto, Cannes 06400, France

Rodman 41. Prestige Yachts Investment (Yachts Invest) - Jean Lacombe. Prestige Yachts Investment, La Croisette, Port Canto, Cannes 06400, France Rodman 41 Make: Model: 41 Length: Rodman 12.5 m Price: EUR 139,000 Year: 2003 Condition: Used Location: Altea, Spain Hull Material: Draft: Number of Engines: 2 Fuel Type: Fibreglass (GRP) 0.85 m Diesel

More information

TIMONIER 540 OUTBOARD

TIMONIER 540 OUTBOARD TIMONIER 540 OUTBOARD Navigation & Safety D ring 1 Stainless steel cockpit rails 1 Stainless steel bow pulpit 1 Forward sampson post 1 Forward fairlead 2 Compass 1 Infused Fiber Glass hull, white gelcoat

More information

MOTORBOOT - BAVARIA SPORT 38 - Lepus

MOTORBOOT - BAVARIA SPORT 38 - Lepus MOTORBOOT - BAVARIA SPORT 38 - Lepus General Brand: Bavaria Sport 38 Name: Reference number: Dimensions (l x w x d): Airdraft: Shipyard: Lepus B1139 11.80 x 3.99 x 1.05 m 3.33 m Bavaria Yachtbau Year of

More information