HANDRAIL & BALUSTRADING CATALOGUE VERSION 1.01

Transcription

1 HANDRAIL & BALUSTRADING CATALOGUE VERSION 1.01

2 Stainless Steel Information 1. It is an often held belief that stainless steel is maintenance free. This however is not necesarily correct. All grades of stainless steel are susceptible to some form of staining or discolouration and periodic cleaning is required. 2. Stainless steel, if not properly maintained will discolour via a process called tea staining. 3. The staining rate and the required maintenance of stainless steel is relative to its environment, surface finish, design, grade of material and exposure. 4. For example, a. An outside balustrade installation along Melbourne s Bayside or Coastal Areas would experience a faster rate of tea staining due to the environmental conditions and would therefore require more frequent maintenance than an indoor stairway balustrade installed in an inner Melbourne suburb of say - Blackburn. b. Due to the relative smoothness of the surface finish, a stainless steel component with a satin finish will display signs of tea staining much sooner than a highly polished component of the same grade. c. Designs that incorporate poor run off (rainwater / washing water / etc) provide areas for stagnant water to collect which may increase the likelihood of tea staining. 5. We therefore suggest that you enquire about appropriate products available for the cleaning and maintenence of stainless steel. Stainless Steel Products BALUSTRADE FITTINGS HANDRAIL FITTINGS RATED FITTINGS WIRE ROPE RIGGING CHAIN TUBE Disclaimer 1. The above information is only given as a guide or general information. If the information given is insufficient, or if you are not satisfied, or certain, we suggest you seek further advice from a professional metallurgist. 2. For safety, structural and strategic applications, independent engineering or specialist advice should be sought from the relevant authorities/experts. Based on this advice, our sales consultants can assist with the supply of rated fittings for these applications as recommended/nominated by your professional, qualified engineer. Under no circumstances is Keble s Trading Pty Ltd or its staff authorized or qualified to make any recommendations whatsoever regarding design or selection of fittings for such applications. 3. Keble s Trading makes no recommendations or claims for the performance and mechanical properties of Stainless Steel and accepts no responsibility or liability whatsoever for any unsatisfactory outcome, unsuitable application or installation of these products. 4. Keble s Trading Pty Ltd makes no recommendations and takes no responsibility for the use of any fastening system or products used in the installation of any Balustrading and Handrail components. The responsibility of the design and choice of fastener for compliance to Aust Standard and relevant codes lies soley with the purchaser. Please consult appropriate authorities and or the advice of professional persons for information on correct design and installation techniques. 5. While every effort has been made to ensure that all information contained in this brochure is correct at the time of printing, we strongly advise that you check all item details with our sales staff at the time of ordering as changes may occur without prior notice.

3 T A B L E O F C O N T E N T S Round Tube & Fittings Welded Tube 1 Handrail Fittings - Weld On 1 Handrail Fittings - Glue On 8 Handrail Brackets 15 Posts and Dropper Fittings 20 Square Tube & Fittings Welded Tube 23 Handrail Fittings - Weld On 23 Handrail Fittings - Glue On 24 Rectangular Tube & Fittings Rectangular Tube and Fittings 28 Glass Balustrading & Pool Fencing Round Slotted Tube and Fittings 29 Capping Tube and Fittings 33 Handrail Brackets 36 Standoffs 37 Glass Clamps - Stainless Steel 39 Glass Clamps - Duplex Glass Panels 41 Spigots for Pool Fencing 46 Latches, Hinges & Gates Product Overview 48 Classic Range Latch Kits 49 Classic Range Hinge Kits 53 Classic Range Gate Options 55 Soft Close Hinge Kits 58 Soft Close Gate Options 63

4 ROUND TUBE & FITTINGS Round Welded Tube ASTM A554 Description GRADE 304 Tube 8118i Ss Round Welded Tube 12.7 x 1.2MM G GRIT 8026i Ss Round Welded Tube 15.9 x 1.2MM G GRIT 6431 Ss Round Welded Tube 12.7 x 1.6MM G GRIT 6424 Ss Round Welded Tube 15.9 x 1.6MM G GRIT 6474 Ss Round Welded Tube 19 x 1.6MM G GRIT 4049i Ss Round Welded Tube 25.4 x 1.6MM G GRIT 4049M Ss Round Welded Tube 25.4 x 1.6MM G GRIT 4059i Ss Round Welded Tube x 1.6MM G GRIT 6309 Ss Round Welded Tube 38.1 x 1.6MM G GRIT 6197 Ss Round Welded Tube x 1.6MM G GRIT GRADE 316L Tube 1787 Ss Round Welded Tube 12.7 x 1.6MM G GRIT 1787M Ss Round Welded Tube 12.7 x 1.6MM G GRIT 6287M Ss Round Welded Tube 15.9 x 1.6MM G GRIT 6334 Ss Round Welded Tube x 1.6MM G GRIT 6334M Ss Round Welded Tube x 1.6MM G GRIT 4050 Ss Round Welded Tube 25.4 x 1.6MM G GRIT 4050M Ss Round Welded Tube 25.4 x 1.6MM G GRIT 4060 Ss Round Welded Tube 31.7 x 1.6MM G GRIT 4060M Ss Round Welded Tube 31.7 x 1.6MM G GRIT 2679 Ss Round Welded Tube 38.1 x 1.6MM G GRIT 2679M Ss Round Welded Tube 38.1 x 1.6MM G GRIT 2684 Ss Round Welded Tube x 1.6MM G GRIT 2684M Ss Round Welded Tube x 1.6MM G GRIT O.D. Round Handrail Fittings - Weld On Tube Joint G304 SIZE L (mm) D (mm) \ Plate and Cover Set SIZE BASE (mm) COVER (mm) D d H TH D d H TH M M M \ \ \ / / / /

5 ROUND TUBE & FITTINGS Tube Cover G316 SIZE D d H TH M M 3-1 1/ 3-1 1/ Round Base Plate and Cover (Cover G316, Base Plate G304) TUBE DESCRIPTION FINISH i 6319Mi 6324i 6324Mi 1 1/ 3 Hole 3 Hole 3 Hole 4 Hole 4 Hole Mirror Mirror Round Cover Plate Only TUBE A B H I FINISH 3006C 3006CM 3007C 3007CM 1 1/ 1 1/ Mirror Mirror SS Mounting Plate 3-Hole G316 FINISH M Mirror 2

6 ROUND TUBE & FITTINGS Long Flange (Cast) SIZE D1 D2 W L H h (mm) (mm) (mm) (mm) (mm) (mm) 3012 (51mm) Short Flange (Cast) SIZE D1 D2 W L H h (mm) (mm) (mm) (mm) (mm) (mm) 3013 (51mm) Round Flange SIZE D d H T (mm) (mm) (mm) (mm) M M (51mm) Mirror Finish Mirror Finish 7 5 Dome End Cap SIZE D (mm) H (mm) TH (mm) /4 (19mm) 1 (25mm) 1 1/4 (32mm) 1 1/ (38mm) (51mm) 2 1/ (63mm) 3 (76mm) 4 (101mm) 5 (127mm)

7 ROUND TUBE & FITTINGS Curved Tube Cap SIZE D (mm) H (mm) TH (mm) 3027 (mm) (mm) (mm) (mm) (mm) (mm) 1 1/ (38mm) (51mm) 2 1/ (63mm) 3 (76mm) 4 (101mm) Push End Cap (Cast) G316 SIZE D d H T (mm) (mm) (mm) (mm) M M /4 (38mm) 1 1/ (38mm) 1 1/ (38mm) (51mm) (51mm) 2 1/ (63mm) 3 (76mm) Rail Converter G316 SIZE D1 D2 d1 d2 L1 L2 L2 (mm) (mm) (mm) (mm) (mm) (mm) (mm) M M (51mm) (51mm) 1 1/ (38mm) 1 1/ (38mm) Bolt Down Adjustable Foot G304 SIZE D(mm) M(mm) H(mm) L(mm) M10x50 M12x50 M16x

8 ROUND TUBE & FITTINGS Wall Bracket G316 SIZE H1 H2 L (mm) (mm) (mm) (mm) (mm) (mm) (mm) M 6 90 Mirror Finish 56 Wall Bracket Cover SIZE D d (mm) (mm) M Mirror Finish Handrail Bracket-Bolt Mount M TUBE O N/A N/A FINISH Mirror 5

9 ROUND TUBE & FITTINGS L Bar SIZE L1 (mm) L2 (mm) D (mm) (mm) (mm) (mm) (mm) (mm) (mm) S/S Tube Bends TUBE ANGLE GRADE FINISH G304 SATIN /4 1 1/ 2 1/ G304 G304 G304 G304 G304 SATIN SATIN SATIN SATIN SATIN /4 1 1/ G304 G304 G304 SATIN SATIN SATIN / /4 1 1/ 2 1/ G316 G316 G316 G316 G316 G316 SATIN SATIN SATIN SATIN SATIN SATIN /4 1 1/ 2 1/ G316 G316 G316 G316 SATIN SATIN SATIN SATIN 6

10 ROUND TUBE & FITTINGS SS Tube Bends (Extended One Leg) TUBE O ANGLE GRADE FINISH 6610 (mm) (mm) (mm) (mm) (mm) (mm) m) 180º Extended º Extended 180º Extended 180º Extended SS Tube Bend 37º G316 TUBE FINISH 6612M Mirror Handrail 180º G316 TUBE FINISH 6281M Mirror 7

11 ROUND TUBE & FITTINGS ROUND HANDRAIL FITTINGS - PUSH ON (Requires approved glue/adhesive product or welding) (mm) (mm) (mm) (mm) (mm) (mm) Adjustable Rail Support Radiused Internal Fit TUBE WALL A B C R 3419M 3519M 1 1/ / 3619M 1 1/ Adjustable Rail Support Radiused External Fit TUBE WALL A B C R 3527M Adjustable Rail Support Flat Base Internal Fit TUBE WALL A B C 3417M 1 1/ M Adjustable Rail Support Flat Base External Fit TUBE WALL A B C 3516M

12 ROUND TUBE & FITTINGS Adjustable Rail Support Round Base Internal Fit TUBE WALL A B C D (mm) (mm) (mm) (mm) (mm) (mm) 3532M Adjustable Rail Support Round Base External Fit TUBE WALL A B C D 3533M Round Flange TUBE A B H I 3409M 3509M 1 1/ Oblong Flange TUBE A B C H I 3408M 3508M 1 1/

13 ROUND TUBE & FITTINGS Wall Stop Flange TUBE D A B W I 3426M 3510M 3526M 1 1/ Flush Joiner 90º Radiused TUBE WALL A B 3412M 3512M 1 1/ Flush Joiner 90º TUBE WALL A B 3402M 3502M 1 1/ Flush Joiner Adjustable TUBE WALL A B C 3424M 1 1/ M

14 ROUND TUBE & FITTINGS Flush Joiner 3-Way Adjustable TUBE WALL A B 3535M 73 Flush Joiner TUBE 135 WALL A B TUBE WALL A B / M 45 Flush Joiner in-line TUBE WALL A B C 3400M 3500M 3500MIC 1 1/ Flush Joiner Tee TUBE WALL A B C 3403M 3503M 1 1/

15 ROUND TUBE & FITTINGS Flush Joiner 90º Tee TUBE WALL A B 3404M 3504M 1 1/ Flush Joiner 135º Tee TUBE WALL A B 3405M 3505M 1 1/ Flush Joiner Rotating TUBE WALL A B 8037Mi 37 End Cap Dome TUBE WALL B H 3425M 1 1/ M 25 12

16 ROUND TUBE & FITTINGS End Cap Flat TUBE WALL B H 3406M 3506M 1 1/ Handrail End 45º TUBE WALL A B C 3513M Handrail End 90º TUBE WALL A B C 3514M

17 ROUND TUBE & FITTINGS Perpendicular Joiner Flush Fitting TUBE WALL B D H R 3411M 3611M 3511M 1 1/ 1 1/ / Perpendicular Joiner External Cap TUBE A B H R 3528M Perpendicular Joiner 37º Cap TUBE A B H R 3515M

18 HANDRAIL BRACKETS (mm) (mm) (mm) (mm) (mm) (mm) Handrail Bracket-Fixed Round Rail-Flat Post M TUBE O FINISH Mirror Handrail Bracket-Fixed Flat Rail-Round Post TUBE O D FINISH 6387 N/A Handrail Bracket-Fixed Round Rail-Round Post TUBE O D FINISH M Mirror Handrail Bracket-Swivel Flat Rail-Flat Post TUBE O FINISH 6389 N/A 15

19 HANDRAIL BRACKETS Handrail Bracket-Swivel Flat Rail-Round Post TUBE O D FINISH 6390 N/A Handrail Bracket-Swivel Round Rail-Round Post M TUBE O FINISH Mirror Handrail Bracket-Fixed Flat Rail-Wall Mount M TUBE O N/A N/A FINISH Mirror Handrail Bracket-Fixed Round Rail-Wall Mount M TUBE O FINISH Mirror 16

20 HANDRAIL BRACKETS Handrail Bracket-Adjustable Flat Rail-Wall Mount M TUBE O N/A N/A FINISH Mirror Handrail Bracket-Adjustable Round Rail-Wall Mount M TUBE O FINISH Mirror Handrail Bracket-Fixed Rail-Bolt Mount M M TUBE O N/A N/A FINISH Mirror Mirror Post Wall Bracket TUBE O D mm A mm B mm W mm I mm 6465Mi

21 HANDRAIL BRACKETS Handrail Support Radiused A B C D I R 3520M Handrail Support Flat Base A B C D FINISHL 3522M Handrail Support with Coach Screw Radiused A B C D L FINISH R 3521M Handrail Support with Coach Screw Flat Base A B C D L 3523M

22 HANDRAIL BRACKETS Domed Rail Support Cap SIZE 6242 x 1.6mm wall Rail Support Fixed BAR DIAMETER LENGTH FEMALE MALE THREAD THREAD mm 40mm M6 M8 Rail Support Adjustable BAR DIAMETER LENGTH FEMALE MALE THREAD THREAD mm 40mm M6 M8 Rail Support Plate Flat SIZE 6246 N/A Rail Support Plate Curved FINISH SIZE 6247 mm Rail Support Plate 90 Curved SIZE 6316 mm Countersunk Socket Screw SIZE 6248 M6 x 19

23 ROUND POSTS & DROPPERS Stainless Steel G316 Pre-fabricated Round Posts and Droppers Square posts also available on request Blank Posts Mid Post Drilled Holes 2895 M 38 BLK 2895 S 38 BLK 2895 M BLK 2895 S BLK Description Post Blank 38.1 Mirror Post Blank 38.1 Post Blank Mirror Post Blank Drilled Posts/Mid Posts Available in 4mm and 9mm drilled holes 2895 M 38 D 2895 S 38 D 2895 M D S D M D S D9 Description Post Drilled 38.1 Mirror Post Drilled 38.1 Post Drilled Mirror 4mm holes Post Drilled 4mm holes Post Drilled Mirror 9mm holes Post Drilled 9mm holes Corner Posts 2894 M S M 2894 S Description Description Post Corner Drilled 38.1 Mirror Post Corner Drilled 38.1 Post Corner Drilled Mirror Post Corner Drilled Corner Posts *** Including M6 Nutserts 2894 M 38 N 2894 S 38 N 2894 M N 2894 S N Description Post Corner Drilled 38.1 Mirror w/ Nutserts Post Corner Drilled 38.1 w/ Nutserts Post Corner Drilled Mirror w/ Nutserts Post Corner Drilled w/ Nutserts Corner Post 20

24 ROUND POSTS & DROPPERS Stair Posts Standard 2896 M S M 2896 S Description Post Stair Drilled 38.1 Mirror Post Stair Drilled 38.1 Post Stair Drilled Mirror Post Stair Drilled Stair Posts - Special ** Price will vary depending on individual job 2896 M 38 SP 2895 S 38 SP 2895 M SP 2896 S SP Description Post Stair Special 38.1 Mirror Post Stair Special 38.1 Post Stair Special Mirror Post Stair Special End Post End Posts 2680 M S M 2680 S Description Post End Drilled 38.1 Mirror Post End Drilled 38.1 Post End Drilled Mirror Description Post End Drilled End Posts *** Including M6 Nutserts 2680 M 38 N 2680 S 38 N 2680 M N 2680 S N Description Post End Drilled 38.1 Mirror w/ Nutserts Post End Drilled 38.1 w/ Nutserts Post End Drilled Mirror w/ Nutserts Post End Drilled w/ Nutserts 21

25 ROUND POSTS & DROPPERS End Posts *** Including Saddles 2680 M 38 S 2680 S 38 S 2680 M S 2680 S S Description Post End Drilled 38.1 Mirror w/ Saddles Post End Drilled 38.1 w/ Saddles Post End Drilled Mirror w/ Saddles Post End Drilled w/ Saddles Dropper with 4mm holes Droppers 6943 M S M M 1000 Description SS Dropper Drilled 12.7MM Mirror 954mm SS Dropper Drilled 12.7MM 954mm SS Dropper Drilled 12.7MM Mirror 977mm SS Dropper Drilled 12.7MM Mirror 1000mm Tube Cut Lengths 8026i i-1100 Description 15.9 x 1.2 G Grit x 970mm 15.9 x 1.2 G Grit x 1100mm 6424i i i x G Grit x 970mm 15.9 x G Grit x 1000mm 15.9 x G Grit x 1100mm Flat Dropper Fittings Description Finish 2668A Flat Dropper Fittings 38mm/50mm S Curved Dropper Fittings Description Finish 2681A Curved Dropper Fittings 50mm S 22

26 SQUARE TUBE & FITTINGS Square Stainless Steel Welded Tube ASTM A554 G304 and G316L Material SQUARE TUBES & FITTINGS Ss Tube Square 12.7 x 1.6 MM G Grit Ss Tube Square 15.9 x 1.6 MM G Grit Ss Tube Square x 1.6 MM G Grit Ss Tube Square 25.4 x 1.6 MM G Grit Ss Tube Square 38.1 x 1.6 MM G Grit Ss Tube Square x 1.6 MM G Grit Ss Tube Square x 1.6 MM G316L 180 Grit Ss Tube Square x 1.6 MM G316L FINISH180 Grit Ss Tube Square x 1.6 MM G316L 180 Grit Ss Tube Square x 1.6 MM G316L 600 Grit Square Tube Cap SIZE L L1 H TH (mm) (mm) (mm) FINISH (mm) Rail Converter Square SIZE GRADE FINISH M M 1 1/ G / G316 Mirror G316 G316 Mirror 23

27 SQUARE TUBE & FITTINGS Square Plate and Cover TUBE GRADE COVER GRADE PLATE FINISH M Mirror / M 1 1/ Mirror FINISH Square Base Plate and Cover TUBE GRADE COVER GRADE BASE M SQUARE HANDRAIL FITTINGS - PUSH ON (Requires approved Glue/Adhesive product or welding) Flush Joiner 90º TUBE WALL A B 3550 mm M mm 63 24

28 SQUARE TUBE & FITTINGS Flush Joiner In-line TUBE WALL A B C M 3551i mm mm mm Flush Joiner Tee TUBE WALL A B C M mm mm Flush Joiner 90 Tee TUBE WALL A FINISH B M mm mm Oblong Flange TUBE WALL A B C FINISH H I M mm mm

29 SQUARE TUBE & FITTINGS Wall Stop Flange 37 TUBE WALL A B C I M mm mm Square Flange TUBE WALL A B C H I 3556 mm M mm End Cap Flat TUBE WALL A FINISH H L 3557 mm M mm / mm M 1 1/ mm Square Tube Cover G316 SIZE D d H FINISH TH mm mm mm mm / x x

30 SQUARE TUBE & FITTINGS Adjustable Rail Support Flat Top TUBE WALL A B H I M mm mm Post Reducer Square - Round In-Line TUBE WALL A H L R W 3559 mm M mm Post Reducer Square - Round Adjustable TUBE WALL A H L FINISH R W 3560 mm M mm Post Reducer Square - Round 90 Corner TUBE WALL A H L FINISH R W 3561 mm M mm

31 RECTANGULAR TUBE & FITTINGS Rectangular Handrail Tube M M DESCRIPTION S/S Rectangular Tube x 10 x mm G Grit S/S Rectangular Tube x 10 x mm G Grit S/S Rectangular Tube 50 x 25 x 1.6 G Grit S/S Rectangular Tube 50 x 25 x 1.6 G Grit S/S Rectangular Tube 50 x 25 x 1.6 G Grit S/S Rectangular Tube 50 x 25 x 1.6 MM G Grit S/S Rectangular Tube 50 x 25 x 1.6 MM G Grit Rectangular End Cap DESCRIPTION 6876 S/S End Cap 50 x 25 G316 Rectangular Wall Flange 6877 DESCRIPTION S/S Wall Flange 50 x 25 G316 FINISH Rectangular Elbow 6879 DESCRIPTION S/S Elbow 90 Deg 50 x 25 G316 Rectangular Joiner FINISH 6878 DESCRIPTION S/S Joiner 50 x 25 G316 28

32 GLASS BALUSTRADING & POOL FENCING S E C T I O N

33 ROUND SLOTTED TUBE & FITTINGS Round Slotted Tube Round Slotted Stainless Welded Tube AISI 316 ASTM A554 O.D. WALL FINISH W H SLOT LENGTH M M M mm mm mm mm mm mm 320g 600g 320g 600g 320g 600g Single Single Double Double Dbl 90º Dbl 90º 6M 6M 6M 6M 3M 3M Round Slotted Fittings (Requires approved Glue/Adhesive product or welding) End Cap Flat (Single Slot) TUBE WALL B H1 H2 W FINISH 3748 mm M mm End Cap Flat (Double Slot) TUBE WALL B H1 H2 FINISHW 3751 mm M mm

34 ROUND SLOTTED TUBE & FITTINGS Flush Joiner 90 (Single Slot) TUBE WALL A B H W M mm mm Flush Joiner 90 Tee (Single Slot) TUBE WALL A B H W M mm mm Flush Joiner In-Line (Single Slot) TUBE WALL A B C FINISH H W M mm mm Flush Joiner Tee (Single/Double Slot) Bottom section suits double slotted tube Top section suits single slotted tube FINISH TUBE WALL A B C H W 3750 mm M mm

35 ROUND SLOTTED TUBE & FITTINGS Perpendicular Joiner Flush Fitting (Single Slot) Weld on Join posts to a horizontal handrails to vertical posts. Top section suits single slotted tube TUBE WALL A B H W M mm mm Perpendicular Joiner Flush Fitting (Double Slot) Weld on Join posts to a horizontal handrail or join horizontal handrails to vertical posts. Fix joiners to the top handrail with screws or rivets through the underneath internal. TUBE WALL B D H1 H2 W R M mm mm Round Slotted Tube Blanking Strip TUBE SUIT SLOT WALL POLISH LENGTH W M 15mm 15mm mm mm 600g 600g 3mtr 3mtr FINISH 31

36 ROUND SLOTTED TUBE & FITTINGS Elbow CODE DESCRIPTION O H FINISH AN G Flush Elbow 48.3 x 35 S 90 deg Corner CODE DESCRIPTION O H FINISH AN G 90 Degree Bend 48.3 x 35 S Connector CODE DESCRIPTION O FINISH AN Connector 48.3 x S End Cap CODE DESCRIPTION O FINISH AN End Cap 48.3 x S Tube for Glass Insert / Plastic Insert for Tube CODE U T G AN G N/A AN N/A 8-11 AN G 27 N/A AN G 27 N/A Tube for Glass Insert AN G Installation: FINISH Plastic Insert for Tube AN

37

38 RECTANGULAR CAPPING TUBE & FITTINGS *Fittings require approved Adhesive/Glue product or Welding Rectangle Capping Tube DESCRIPTION 6795 Tube Slotted 25x21 G MM 14x14 Slot 6795M Tube Slotted 25x21 G316 Mirror 1.2MM 14x14 Slot End Cap M DESCRIPTION End Cap 25x21 G316 End Cap 25x21 G316 Mirror Wall Flange M DESCRIPTION Wall Flange 25x21 G316 Wall Flange 25x21 G316 Mirror Elbow M DESCRIPTION Elbow 25x21 G316 Elbow 25x21 G316 Mirror Joiner M DESCRIPTION Joiner 25x21 G316 Joiner 25x21 G316 Mirror FINISH 34

39 RECTANGULAR CAPPING TUBE & FITTINGS *Fittings require approved Adhesive/Glue product or Welding Rectangular Capping Tube M DESCRIPTION S/S Rectangular Slotted Tube x 25.4 G316 S/S Rectangular Slotted Tube x 25.4 G316 Mirror Rectangular Slotted End Cap 6789M 6789i DESCRIPTION S/S Rectangular Slotted End Cap x 25.4 G316 Mirror S/S Rectangular Slotted End Cap x 25.4 G316 Rectangular Slotted Wall Flange 6790M 6790i DESCRIPTION S/S Rectangular Slotted Wall Flange x 25.4 G316 Mirror S/S Rectangular Slotted Wall Flange x 25.4 G316 Rectangular Slotted Elbow DESCRIPTION 6788M S/S Rectangular Slotted Elbow x 25.4 G316 Mirror Rectangular Slotted Joiner DESCRIPTION FINISH 8090Mi S/S Rectangular Slotted Joiner x 25.4 G316 Mirror 35

40 GLASS FITTINGS & BRACKETS Handrail Bracket-Fixed Flat Rail-Glass Mount TUBE O FINISH C M N/A N/A Mirror Handrail Bracket-Fixed Round Rail-Glass Mount M TUBE O FINISH Mirror Handrail Bracket-Swivel Flat Rail-Glass Mount M TUBE O N/A N/A FINISH Mirror Handrail Bracket-Adjustable Round Rail-Wall Mount M TUBE O FINISH Mirror 36

41 GLASS FITTINGS & BRACKETS Handrail Bracket - Fixed Rail - Glass Mount M M TUBE O N/A N/A FINISH Mirror Mirror SS Standoff Handrail Bracket D d H B L FINISH 6385i Mi Mirror Stainless Steel Glass Stand-off D L W T M M M Stainless Steel Glass Stand-off M10 Thread D L W T P/N

42 GLASS FITTINGS & BRACKETS S/S Lag Screw Double Threaded G304 SIZE A B1 B2 C i M10x75 M10x100 M10x120 M10x140 M10x160 M10 M10 M10 M10 M i i i M12x130 M12x160 M12x160 M12x160 M12x300 M12 M12 M12 M12 M S/S Lag Screw Double Threaded G316 SIZE M6x100 M i i M8x65 M8x65 M8x90 M8x100 M8x100 M8x120 M8 M8 M8 M8 M8 M i M10x100 M10x100 M10x160 M10 M10 M S/S Threaded Rod G M12x300 M SIZE A B M10x140 M M12x100 M12x120 M12x160 M12 M12 M S/S Threaded Rod G316 SIZE A B i M10x100 M10x120 M10x120 M10 M10 M

43 GLASS CLAMPS - STAINLESS STEEL Glass Clamp Medium D Type G316 (includes 10 and Gaskets) GLASS POST FINISH H L W T D ,8,10, Square/Flat M 6,8,10, Square/Flat Mirror ,8,10, Round M 6,8,10, Round Mirror Rubber Gaskets for D Type Glass Clamps TO SUIT GLASS 6131-G G G G & & & & mm 8mm Glass Clamp Large Square Type G316 (includes 10 and Gaskets) GLASS POST FINISH H L W T D ,10, Square/Flat M 8,10, Square/Flat Mirror ,10, Round M 8,10, Round Mirror mm Round mm Round Rubber Gaskets for Square Type Glass Clamps TO SUIT GLASS 6224-G G G G G G & & & & & & mm 6mm 8mm 39

44 GLASS CLAMPS DUPLEX Glass Clamp Medium 'D" Type 2205 Duplex Available in and Polished finish Suits 6- glass Flat back model and radius option to suit OD tube GLASS POST FINISH 28.1 R22.5 GCD F 4563Si 6 - Square/Flat 45 GCD F 4563Mi 6 - Square/Flat Mirror GCD R 4563Si GCD R 4563Mi Round Round Mirror 63 Rubber Gaskets for D Type* Rubber Gaskets to suit Large Square Type * GLASS GLASS GCD G i 6mm GCD G i 6mm GCD G i 8mm GCD G i 9mm GCD G i GCD G i GCD G i GCD G i Glass Clamp Large Square Type 2205 Duplex GLASS POST FINISH GCD F 5555Si 6- Square/Flat 55 GCD F 5555Mi 6- Square/Flat Mirror GCD R 5555Si 6- Round GCD R 5555Mi 6- Round Mirror Additional items: Metal Pin with safety bush* GCD Pin Base plate* For square clamps * Please specify at time of ordering your requirement for Gaskets, Metal Pins and Base Plates 40

45 GLASS INFILL PANELS, 850mm High Heat Soaked & Toughened Glass Infill Panels - No Hole Width Height Thickness Sqm Glass Weight KGS 850GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP GIP mm 530mm 580mm 630mm 680mm 730mm 780mm 830mm 880mm 930mm 980mm 1030mm 1080mm 1130mm 1180mm 1230mm 1280mm 1330mm 1380mm 1430mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm 850mm kg. 11kg. 12kg. 13kg. 14kg. 16kg. 17kg. 18kg. 19kg. 20kg. 21kg. 22kg. 23kg. 24kg. 25kg 26kg. 27kg. 28kg. 29kg. 30kg. Glass Infill Panels 41

46 GLASS SEMI-FRAMELESS PANELS, 950mm High Heat Soaked & Toughened Glass - No Hole Width Height Thickness Sqm Glass Weight KGS 950GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF GSF mm 530mm 580mm 630mm 680mm 730mm 780mm 830mm 880mm 930mm 980mm 1030mm 1080mm 1130mm 1180mm 1230mm 1280mm 1330mm 1380mm 1430mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm 950mm kg. 13kg. 14kg. 15kg. 16g. 17kg. 19kg. 20kg. 21kg. 22kg. 23kg. 24kg. 26kg. 27kg. 28kg. 29kg. 30kg. 32kg. 33kg. 34kg. Semi-Frameless Panels 42

47 CHANNEL GLASS PANELS - NO HOLE, 970mm High Heat Soaked & Toughened Channel Glass Panels - No Hole Width Height Thickness Sqm 970GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH GCH mm 550mm 600mm 650mm 700mm 750mm 800mm 850mm 900mm 950mm 1000mm 1050mm 1100mm 1150mm 1250mm 1300mm 1350mm 1400mm 1450mm 1500mm 1550mm 1600mm 1650mm 1700mm 1750mm 1800mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm 970mm Glass Weight KGS 15kg. 16kg. 17kg. 18kg. 20kg. 22kg. 23kg. 25kg. 26kg. 27kg. 28kg. 29kg. 31kg. 32kg. 33kg. 35kg. 38kg. 39kg. 41kg. 42kg. 44kg. 45kg. 47kg. 48kg. 49kg. 50kg. 52kg. Channel Glass Panels 43

48 GLASS POOL FENCING PANELS, High Toughened Glass Pool Fencing Panels - No Hole Suits friction fit spigots Width Height Thickness Sqm Glass Weight KGS 1200GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF GPF mm 450mm 500mm 550mm 600mm 650mm 700mm 750mm 800mm 850mm 900mm 950mm 1000mm 1050mm 1100mm 1150mm 1250mm 1300mm 1350mm 1400mm 1450mm 1500mm 1550mm 1600mm 1650mm 1700mm 1750mm 1800mm 1850mm 1900mm 1950mm 2000mm kg. 16kg. 18kg. 20kg. 22kg. 23kg. 25kg. 27kg. 29kg. 31kg. 32kg. 34kg. 36kg. 38kg. 40kg. 42kg. 43kg. 45kg. 47kg. 49kg. 50kg. 53kg. 54kg. 56kg. 58kg. 60kg. 61kg. 63kg. 65kg. 67kg. 68kg. 70kg. 72kg. Glass Pool Fencing Panels 44

49 SUGGESTED SPIGOT PLACEMENT No Hole 12MM Toughened Glass Panels - Pool Fencing *To centre of spigot Overall Width A B C 500mm 100mm 300mm 100mm 600mm 100mm 400mm 100mm 700mm 100mm 500mm 100mm 800mm 900mm 1000mm 150mm 150mm 150mm 500mm 600mm 700mm 150mm 150mm 150mm WIDTH 1050mm 150mm 750mm 150mm 1100mm 200mm 700mm 200mm 1150mm 200mm 750mm 200mm 1250mm 1300mm 1350mm 200mm 200mm 200mm 200mm 800mm 850mm 900mm 950mm 200mm 200mm 200mm 200mm 12MM THICK CLEAR TOUGHENED GLASS 1400mm 250mm 900mm 250mm 1450mm 250mm 950mm 250mm 1500mm 250mm 1000mm 250mm 1550mm 250mm 1050mm 250mm 1600mm 1650mm 250mm 250mm 1100mm 1150mm 250mm 250mm A 1700mm 250mm 250mm 1750mm 250mm 1250mm 250mm 1800mm 250mm 300mm 1900mm 250mm 1400mm 250mm 2000mm 300mm 1400mm 300mm B C 45

50 SPIGOTS FOR POOL FENCING Pool Fencing Friction Fit Spigots - Base Mount Stainless Steel DESCRIPTION SPIGOTS G S/S Base Mount Round Friction Fit M S/S Base Mount Round Friction Fit - Mirror 6755 S/S Base Mount Square Friction Fit M S/S Base Mount Square Friction Fit - Mirror P/N 6755 O P/N

51 SPIGOTS FOR POOL FENCING Pool Fencing-Friction Fit Spigots - Core Drill Stainless Steel DESCRIPTION SPIGOTS G S/S Core Drill Round Friction Fit M S/S Core Drill Round Friction Fit - Mirror 6728 S/S Core Drill Square Friction Fit M S/S Core Drill Square Friction Fit - Mirror 6829 S/S Core Drill Round Friction Fit Ribbed M S/S Core Drill Round Friction Fit Ribbed - Mirror P/N R P/N 6728 R P/N

52 LATCHES, HINGES AND GATES - PRODUCT OVERVIEW CLASSIC RANGE Classic Range Latches Polish Finish Finish CR LGF SS P CR LGF SS S CR LWS SS P CR LWS SS S CR LRP SS P CR LRP SS S CR LGF L P CR LGF L S CR LWS L P CR LWS L S CR L90EF L P CR L90EF L S CR L90EHP P CR L90EHP S CR L90IF L P CR L90IF L S Description Material Fit Glass to Glass Glass to Wall/Square Post Glass to Round Post Glass to Glass Glass to Wall/Square Post Glass to Glass - External Fit Hook Plate - External Fit Glass to Glass - Internal Fit S/S G316 S/S G316 S/S G316 S/S G316 - Polymer S/S G316 - Polymer S/S G316 - Polymer S/S G316 S/S G316 - Polymer FRICTION FRICTION FRICTION FRICTION LOCKABLE LOCKABLE LOCKABLE LOCKABLE CR LKFM L Latch Kit - Face Mount Black Polymer Nylon LOCKABLE Classic Range Hinges Polish Finish CR HGG P CR HFM P CR HSP P CR HRP P Finish CR HGG S CR HFM S CR HSP S CR HRP S Description Glass to Glass Face Mount Glass to Wall/Square Post Glass to Round Post Material S/S G316 S/S G316 S/S G316 S/S G316 Classic Range Gates CR G CR G CR G Description 8mm Glass x 750mm 8mm Glass x 834mm 8mm Glass x 890mm SOFT CLOSE RANGE Soft Close Hinges Polish Finish Finish SC HGG P SC HGG S SC HGW P SC HGW S SC HOW P SC HOW S SC HSP P SC HSP S SC HRP P SC HRP S Description Glass to Glass Glass to Wall Glass to Offset Wall Glass to Square Post Glass to Round Post Material S/S G316 - Polymer S/S G316 - Polymer S/S G316 - Polymer S/S G316 - Polymer S/S G316 - Polymer Soft Close Gates Polish Finish SC GGG SC GWP Description Glass to Glass Glass to Wall/Post Glass x 900 Glass x

53 CLASSIC RANGE LATCH KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Glass Latch Kit : CR LGF SS P (polish finish) : CR LGF SS S (satin finish) G316 STAINLESS STEEL Or Polish Finish D&D stainless steel side pull latch FRICTION LATCH for glass to glass 180 degree application Suits 8, 10 and glass gates Latch panel must be thick - no latch holes required Material Glass to Wall / Sq Post Latch Kit : CR LWS SS P (polish finish) : CR LWS SS S (satin finish) G316 STAINLESS STEEL Or Polish Finish D&D stainless steel side pull latch Suitable for application to wall or square posts Suits 8, 10 and glass gates 49

54 CLASSIC RANGE LATCH KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Round Post Latch Kit : CR LRP SS P (polish finish) : CR LRP SS S (satin finish) G316 STAINLESS STEEL Or Polish Finish Glass gate to 50mm round post Suits 8, 10 and glass gates Material Glass to Glass Latch Kit : CR LGF L P (polish finish) : CR LGF L S (satin finish) G316 STAINLESS STEEL & POLYMER Or Polish Finish LOCKABLE LOCKABLE side pull latch FRICTION LATCH for glass to glass 180 degree application Stainless steel backing plates + D&D side pull polymer latch Suits 8, 10 and glass gates Latch panel must be thick no latch holes required 50

55 CLASSIC RANGE LATCH KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Wall / Sq Post Latch Kit : CR LWS L P (polish finish) : CR LWS L S (satin finish) G316 STAINLESS STEEL & POLYMER Or Polish Finish LOCKABLE LOCKABLE side pull latch Glass gate to wall/ square post application Stainless steel backing plates + D&D side pull polymer latch Suits 8, 10 and glass gates Glass to Glass Latch Kit Material EXTERNAL CORNER FIT : CR L90EF L P (polish finish) : CR L90EF L S (satin finish) G316 STAINLESS STEEL & POLYMER Or Polish Finish LOCKABLE side pull latch glass gate to 90 degree latch panel external fit FRICTION Fit Stainless steel backing plates + D&D side pull polymer latch Suits 8, 10 and glass gates Latch panel must be 2mm thick - no latch holes required LOCKABLE Hook Plate - External Fit : CR L90EHP P (polish finish) : CR L90EHP S S (satin finish) G316 STAINLESS STEEL Or Polish Finish An optional extra that can be installed or retro fitted Suits 90 degree external friction latch kit Prevents the latch panel from being released or pulled from gate 51

56 CLASSIC RANGE LATCH KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Glass 90 Deg Latch Kit INTERNAL CORNER FIT : CR L90IF L P (polish finish) : CR L90IF L S (satin finish) G316 STAINLESS STEEL & POLYMER Or Polish Finish LOCKABLE LOCKABLE side pull latch glass gate to 90 degree latch panel internal fit FRICTION FIT Stainless steel backing plates + D&D side pull polymer latch Suits 8, 10 and glass gates Latch panel must be thick - no latch holes required Suits internal 90 degree configuration Material Latch Kit Face Mount - Latch Only : CR LKFM L Black polymer nylon D&D latch LOCKABLE LOCKABLE 52

57 CLASSIC RANGE HINGE KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Glass Hinge - Set of 2 : CR HGG P (polish finish) : CR HGG S (satin finish) G316 STAINLESS STEEL Or Polish Finish Glass gate to glass hinge panel Suits 8 and glass gates Cone shaped cap to prevent toe hold Includes solid stainless G316 backing plates Material Face Mount Hinge - Set of 2 : CR HFM P (polish finish) : CR HFM S (satin finish) G316 STAINLESS STEEL Or Polish Finish Face mount hinge set For hinging off the front face of a wall/surface Suits 8 & glass gates Cone shaped cap to prevent toe hold 53

58 CLASSIC RANGE HINGE KITS OPTIONS TO SUIT SEMI-FRAMELESS AND FRAMELESS APPLICATIONS Glass to Wall/Sq Post Hinge - Set of 2 : CR HGG P (polish finish) : CR HGG S (satin finish) G316 STAINLESS STEEL Or Polish Finish Glass gate to glass hinge panel Suits 8 and glass gates Cone shaped cap to prevent toe hold Includes solid stainless G316 backing plates Material Glass to Round Post Hinge - Set of 2 : CR HRP P (polish finish) : CR HRP S (satin finish) G316 STAINLESS STEEL Or Polish Finish Glass gate to 50mm round post Suits 8 and glass gates Cone shaped cap to prevent toe hold 54

59 CLASSIC RANGE - FRAMELESS GATE OPTIONS GATE OPTION 1 Classic Range - 834mm GATE OPTION 2 Classic Range - 890mm : CR G x diameter holes : CR G x diameter holes Material ***Additional Gate Option available: : CR G x 750mm CLASSIC RANGE - FRAMELESS GATE LAYOUTS Glass to Glass Hinges & Glass to Glass Latch 55

60 CLASSIC RANGE - FRAMELESS GATE LAYOUTS Glass to Glass Hinge & Wall/Post Gate Latch Wall/Square Post Glass Hinges & Glass to Glass Latch Use a FRICTION latch and any size panel can be used as the latch panel 56

61 CLASSIC RANGE - FRAMELESS GATE LAYOUTS Glass to Glass Hinges & EXTERNAL 90 Degree Corner Fitting Latch Glass to Glass Hinges & INTERNAL 90 Degree Corner Fitting Latch Classic Hinge Panel Available Widths: 1000/1200/1400*/1500*/1600/1800mm 57

62 SOFT CLOSE HINGE KITS Soft Close Glass to Glass Hinge - Set of 2 : SC HGG P (polish finish) : SC HGG S (satin finish) G316 STAINLESS STEEL & POLYMER Or Polish Finish Weight capacity 50kg per pair Adjustable closing speed and soft close action Modular glass gate and hinge panels available Suits 10 or glass gates 58

63 SOFT CLOSE HINGE KITS Soft Close Glass to Wall Hinge - Set of 2 : SC HGW P (polish finish) : SC HGW S (satin finish) G316 STAINLESS STEEL Or Polish Finish Weight capacity 50kg per pair Adjustable closing speed and soft close action Modular glass gate and hinge panels available Suits 10 or glass gates 59

64 SOFT CLOSE HINGE KITS Soft Close Glass to Offset Wall Hinge - Set of 2 : SC HOW P (polish finish) : SC HOW S (satin finish) G316 STAINLESS STEEL Or Polish Finish Weight capacity 50kg per pair Adjustable closing speed and soft close action Modular glass gate and hinge panels available Suits 10 or glass gates 60

65 SOFT CLOSE HINGE KITS Soft Close Glass to Square Post Hinge - Set of 2 : SC HSP P (polish finish) : SC HSP S (satin finish) G316 STAINLESS STEEL Or Polish Finish Weight capacity 50kg per pair Adjustable closing speed and soft close action Modular glass gate and hinge panels available 61

66 SOFT CLOSE HINGE KITS Soft Close Glass to Round Post Hinge - Set of 2 : SC HRP P (polish finish) : SC HRP S (satin finish) G316 STAINLESS STEEL Or Polish Finish Weight capacity 50kg per pair Adjustable closing speed and soft close action Modular glass gate and hinge panels available 62

67 SOFT CLOSE RANGE - FRAMELESS GATES & LAYOUTS GLASS TO GLASS HINGES - SOFT CLOSE GATE OPTION 3 900mm : SC GGG x cut outs & 2 x diameter holes 200mm 209mm 42mm 20mm 41mm 200mm GLASS TO GLASS HINGES & GLASS TO GLASS LATCH - SELECT GATE OPTION 3 Hinge Panel Available Widths: 1200/1400*/1600mm 5mm 900mm 9mm gap Use a FRICTION latch & any size panel can be used as a latch panel GLASS TO GLASS HINGES & GLASS TO WALL/SQUARE POST LATCH - SELECT GATE OPTION 3 Hinge Panel Available Widths: 1200/1400*/1600mm 5mm 900mm 9mm gap 63

68 SOFT CLOSE RANGE - FRAMELESS GATES & LAYOUTS Glass to Glass Hinges & External 90 Degree Corner Fitting Latch - SELECT GATE OPTION 3 Latch Panel use a 90 Degree FRICTION latch & any glass panel can be used as a latch panel Hinge Panel Available Widths: 1200/1400*/1600mm Soft Close Hinge Panel Soft Close Gate Option 3 *1400MM HINGE PANELS NOT AVAILABLE WITH DRILLED SPIGOT Glass to Glass Hinges & INTERNAL 90 Degree Corner Fitting Latch - SELECT GATE OPTION 3 Hinge Panel Available Widths: 1200/1400**/1600mm 200mm gate offset Soft Close Hinge Panel 5mm gap Soft Close Gate Option 3 9mm gap 9mm gap Gate Swing Latch Panel use a 90 Degree FRICTION latch & any glass panel can be used as a latch panel 64

69 SOFT CLOSE RANGE - FRAMELESS GATES & LAYOUTS GLASS TO WALL/POST HINGES - SOFT CLOSE GATE OPTION 4 : SC GWP x cut outs & 2 x diameter holes 900mm 200mm 209mm 42mm 20mm 61mm 200mm WALL GLASS HINGES & GLASS TO GLASS LATCH - SELECT GATE OPTION 4 9mm 8mm 65

70 SOFT CLOSE RANGE - FRAMELESS GATES & LAYOUTS Square Post Glass Hinges & Glass to Glass Latch - SELECT GATE OPTION 4 NOTE: Ensure post is HEAVY DUTY for hinging or latching applications 8mm gap 900mm 9mm Use a FRICTION latch & any size panel can be used as a latch panel Round Post Glass Hinges & Glass to Glass Latch - SELECT GATE OPTION 4 NOTE: Ensure post is HEAVY DUTY for hinging or latching applications 8mm gap 900mm 9mm Use a FRICTION latch & any size panel can be used as a latch panel 66

71 SUITABLE FOR 1X19 WIRE ROPE THIS GROUP RECOMMENDED FOR USE OVER SHORT SPANS SUITABLE FOR 7X7 WIRE ROPE Stainless Steel WIRE ROPE INFILLS Saddle Anchors 5mm, 1 Jaw/Jaw, Bottlescrew Tensioner M5, 2 Swaged Thimbled Eyes 3mm. Use with screws or pop rivets. 2 Saddle Anchors 5mm, 1 Eye/Eye Turnbuckle Tensioner M5, 2 Swaged Thimbled Eyes 3mm. Use with screws or pop rivets Screw Eye Anchors (Suitable for timber posts), 1 Jaw/Jaw Bottlescrew Tensioner M5, 2 Swaged Thimbled Eyes 3mm. 1 Button Head Socket Screw, 1 Internal Threaded Terminal M5, 1 Dome terminal 1/8, (Recommended for steel posts only) 1 Hex Tensioner M6, 1 Swage Stud 1/8 x M6, 1 Dome Terminal 1/8 (Recommended for steel posts only) Hex Nut, 2 Swage Studs 1/8 x M5, 1 Dome Nut, (Choice of Dome or Hex nut) 1 Swage Stud Lag Screw 1/8 LHT, 1 Swage Stud Lag Screw 1/8 RHT. (Suitable for timber posts only) 2 Screw Eye Anchors (Suitable for timber posts), 1 Mini Jaw/Tube Bottlescrew Tensioner, 1 Mini Fork Terminal. 2 Saddle Anchors 5mm, 1 Jaw/Tube Bottlescrew Tensioner M5, 1 Fork Terminal 5mm pin. Use with screws or pop rivets. 2 Nutserts 6mm, 2 Micro Screw Eye Bolts 6mm, 1 Jaw/Tube Bottlescrew Tensioner M5, 1 Fork Terminal 5mm pin. (Recommended for steel posts only) 9 2 Screw Eye Anchors (Suitable for timber posts), 1 Jaw/Tube Bottlescrew Tensioner M5, 1 Fork Terminal 5mm pin

72 DANDENONG TEL (03) FAX (03) Unit 1/28 Johnston Court Dandenong VIC 3175 WE ALSO OFFER THE FOLLOWING PRODUCT RANGES: CAMPBELLFIELD TEL (03) FAX (03) Unit 6, 1880 Hume Highway Campbellfield VIC 3061 BALUSTRADE FITTINGS WIRE ROPE & FITTINGS STAINLESS STEEL RIGGING ALLOY LIFTING CHAIN & FITTINGS MATERIALS HANDLING WEBBING SLINGS HEIGHT SAFETY KILSYTH STH TRANSPORT TEL (03) FAX (03) RIGGING Unit 1, 120 Canterbury Road CHAIN Kilsyth South VIC 3137 WINCHES MISC HARDWARE LAVERTON NTH TEL (03) FAX (03) Unit 15, Little Boundary Road Laverton Nth VIC