Ray Ev, Inc. Window Treatment Manufacturing

Transcription

1 Ray Ev, Inc. Window Treatment Manufacturing SUGGESTED RETAIL PRICE Vertical Blinds Wood Blinds Faux Wood Blinds Mini Blinds Roller Shades & Zebra Shades Cellular Shades DEALER NET PRICE Draperies Fabrication Labor Roman Shade Labor Motorized Roman & Roller Shades February 1, Variel Avenue, Woodland Hills, CA / / FAX

2 Welcome to Ray Ev! For over 40 years we have worked to supply our industry with the finest quality in window treatment manufacturing. Our reputation has been built on providing quality materials through personalized and efficient service. We pride ourselves on developing strong working relationships with all our customers, big or small. Thank you for your continued support. IMPORTANT ORDERING PROCEDURE INFORMATION To avoid common errors at the point of order entry, Ray Ev encourages that all orders be faxed, ed or mailed to our Customer Service Department. Telephone orders are accepted as the dealer s responsibility. Please be sure to include your account name, billing address, shipping address and sidemark with every order. Always give the width measurement first, followed by the length, and any special instructions. Confirmation will be for your review. Please add our addresses to your contact list to ensure it does not go to a spam folder. It is your responsibility to take the time to review the order immediately and inform us if there are any discrepancies. Ray Ev will remake or replace any product we make a manufacturing error on; however, at no time will we be held responsible for charge backs on callbacks or trip charges from installers. Visit our website to check your order status, view updated price book and print order forms. Phone # Fax # Toll Free # Website: All BLINDS, ROLLER & ZEBRA SHADES AND CELLULAR SHADES prices contained here are manufacturer s SUGGESTED RETAIL. Please refer to your account profile discount form to calculate dealer cost. All DRAPERIES, FABRICATION LABOR, ROMAN SHADE LABOR AND MOTORIZED ROMAN & ROLLER SHADES prices contained here are DEALER NET; no discount applies. OFFICE & FACTORY HOURS MONDAY - FRIDAY CUSTOMER SERVICE 7:30am to 4:00pm WILL CALL 7:30am to 4:00pm ALL DEPARTMENTS ARE CLOSED FOR LUNCH 12:00pm (Noon) to 1:00pm NO PICK UPS DURING LUNCH OR AFTER WILL CALL HOURS.

3 FREIGHT POLICY Delivery by Ray Ev truck is available to a certain local geographic areas at a 5% charge. The minimum order for delivery is $100. You will be charged a $5.00 fee if your order is less than a minimum or we may ship it. All orders that are shipped via UPS or Trucking Company will incur the actual freight cost as charged by the shipping company. You will be responsible for the freight cost. We will help you in determining the best and cheapest way to ship. Additional charges will be incurred for oversized blinds, which must be shipped via special trucking company. Blinds over the following sizes are considered oversize: Mini Blinds & Vertical Blinds..over 104 Horizontal Blinds.....over 82 C.O.D. Customers will be charged all applicable C.O.D. fees. FREIGHT DAMAGE UPS & COMMON CARRIER - If you suspect freight damage, REFUSE the shipment. The merchandise will be returned to the nearest UPS shipping dock for inspection. After the inspection, the merchandise will be returned to Ray Ev for repair or replacement. Contact our Customer Service Department for further information. Reorders for replacement are the responsibility of the consignee. If you discover concealed damage, retain all packing materials and contact our Customer Service immediately. RETURNS FOR CREDIT OR REPAIR You can t return orders unless prior authorization has been obtained from our Customer Service Department. Customer Service will advise how the merchandise should be returned. All repairs must be provided with original order number, sidemark and reason for repair. You need to obtain a repair number from our Customer Service Department. You may also be responsible for a repair cost. All repairs apply to Ray Ev Products ONLY. WE DO NOT REPAIR NON RAY EV PRODUCTS. TELEPHONE OR VERBAL ORDERS ALL VERBAL AND TELEPHONE ORDERS ARE ACCEPTED AS THE DEALER S FULL RESPONSIBILITY. Each order will be repeated back by the order taker. Please notify any discrepancy on the order when it is repeated back to you. Confirmation will be ed for your review. PLEASE REVIEW IT. It is your responsibility to take the time to review the order immediately and inform us if there are any discrepancies. Ray Ev will remake or replace any product we make a manufacturing error on; however, at no time will we be held responsible for charge backs on callbacks or trip charges from installers. NON-RESPONSIBILITY Ray Ev manufactures custom window treatments with our specifications. We strive to make our product accurate as possible. Ray Ev will not be responsible for any issues between you and your customer other than manufacturing error. We do not take responsibility for discrepancy on your customer s expectation on their window treatment. CANCELLATION Our merchandise is custom made to your specifications and may not be cancelled if the order is in the process of fabrication. If you must cancel your order, please call our Customer Service Department immediately, they will advise you if the order can be cancelled. CREDIT TERMS All sales will be C.O.D. Cash only, unless we have a completed credit application. Credit terms will then be either C.O.D. company check acceptance, or net 30 days, after proper approval of your credit. We may request for a deposit on a large order. PRODUCTION TIMES Our normal production times are 5 to 7 business days for Blinds and Cellular Shades, 7 to 10 business days for Draperies and Roman & Roller Shades or beginning on the day the fabric is received in our factory. Many factors effect these times and therefore they may vary. All quoted production times are a best estimate and Ray Ev makes no guarantee that product will be completed by a specified date. Ray Ev will make every possible attempt to meet the quoted date at the time the order is placed. ALL PRICES AND PRICE LISTS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

4 TABLE OF CONTENTS Product Warranty Information...1 Vertical Blinds Vertical Blind General Information...2 Vertical Suggested Retail Price: Economy Edition...3 Bronze Edition...4 Silver Edition...5 Gold Edition...6 Platinum Edition...7 Crown Valance & Vertical Track Dealer Net Price...8 Vertical Blind Stacking Charts...9 Vertical Blind Order Form & 2 ½ Horizontal Blinds 2 & 2 ½ Horizontal Blind General Information & 2 ½ Traditional Wood & Madison Blind Suggested Retail Price & 2 ½ Faux Wood Blind Suggested Retail Price & 2 ½ Horizontal Blind Order Form Horizontal Blinds 1 Mini Blind General Information & Suggested Retail Price...15 Mini Blind Order Form...16 Ready Made & Custom Draperies Drapery Fabrication Policy...17 Drapery General Information...18 Pleat To & Fullness Charts & Stack Back Chart...19 Drapery Dealer Net Price: Drapery Fabrication Labor & Fabric...20 Ready Made Drapery...21 Mercedes, Alpha, Dobby & Batiste (118 Sheer)...22 Kingsley, Merit, Misty, Voile (118 Sheer) & Blackout Liner...23 Standard, Luxury, Blackout & Thermal Lining...24 Custom Drapery Order Form...26 Custom Roman Shades Roman Shade Labor Policy...26 Roman Shade General Information Roman Shade Labor Dealer Net Price & Square Footage Chart...29 Motorized Roman Shade General Information & Dealer Net Price Flat Pleated Shade & 302 Soft Fold Shade Front Pleated Shade & 304 Front & Back Pleated Shade Flat Shade & 306 Grommet Shade Relaxed Shade & 308 Relaxed with Tails Shade Balloon (Single Pouf) Shade & 310 Balloon (Multi-Pouf) Shade Roman Shades Installation Instruction Custom Roman Shade Order Form...44 Custom Motorized Roman Shade Order Form...45

5 TABLE OF CONTENTS Custom Roller Shades Roller Shade General Information...45 Roller Shade Valance Options...47 Tips for Measuring & Installation Instructions Regular or Reverse Rolling...53 Motorized Roller Shade General Information & Dealer Net Price...54 Custom Roller Shade Suggested Retail Price: Solar Screen %, 3%, 5% & 10%...55 Vision 351 Comfort Plus FR - 1%...56 Vision 403 FR - 3% Colorama FR (B) - 5%...56 Vision 550 FR (A) & (B) - 5%...57 Solar Screen Decorative Stucco - 8%...57 Claire...57 Premium Blackout...58 Lanair Blackout...58 Florence Blackout...58 Palm Beach Blackout PES Blackout...59 South Beach Blackout (I)...59 Stucco Blackout...59 Palm Beach Light-Filtering...60 Nature...60 Rome...60 Amalfi...60 Mistral...60 Ibiza...60 South Beach (I)...61 Natural Collection Roller Shade...62 Natural Collection Roman Shade...63 Zebra Shade General Information Zebra Shade Valance Options...66 Custom Zebra Shade Suggested Retail Price: Zebra Aria, Peninsula & Westin...67 Custom Roller Shade Order Form...68 Custom Motorized Roller Shade Order Form...69 Custom Cellular Shades Cellular Shade General Information...70 Cellular Shade Color & Number Selection...71 Cellular Shade Limitation & Measure Custom Cellular Shade Suggested Retail Price: 9/16 Single Cell Light Filtering Fabric /16 Double Cell Light Filtering Fabric /16 Single Cell Blackout Fabric /16 Single Cell Light Filtering Premium Sheer Fabric /16 Single Cell Light Filtering Premium Crush/Slub Woven Fabric /16 Single Cell Light Filtering Linen Print Fabric /16 Single Cell Light Filtering Fire Retardant Fabric /16 Single Cell Blackout Fire Retardant Fabric /4 Single Cell Light Filtering Smooth Fabric /4 Single Blackout Smooth Fabric...78 Motorized Lift System...79 Specialty Cellular Shades...80 Custom Cellular Shade Specialty Suggested Retail Price...81 Custom Cellular Shade Order Form...82 Repair Form...83

6 LIMITED LIFETIME WARRANTY BLINDS & SHADES PARTS & LABOR Ray Ev extends this limited lifetime warranty to the original purchaser, and applies only to custom product properly installed in the window for which they were intended. This warranty does not apply to any Ray Ev product damaged by accident, misuse, and abuse, direct exposure to salty air or discoloration due to sunlight after three years or the passage of time, to be determined by Ray Ev or one of its authorized dealers. This warranty does not apply to conditions caused by normal wear and tear upon the product. It also does not apply to any product damaged by fire, flood, lightning, or other acts of nature. Our warranty obligation excludes shipping charges and labor cost for measuring and installation. In the event of a defect found under this warranty, Ray Ev will repair or replace the product at our option, provided it is returned to an authorized Ray Ev dealer. Wood blinds are a natural wood product and some slight warpage may occur. Color and graining from slat to slat may differ due to natural differences in the wood itself. Ray Ev warrants wood blinds from excessive warpage for five years from the time of purchase. In no event shall Ray Ev be liable for incidental or consequential damage, loss, cost expense or fee. Ray Ev will repair or replace any blind found defective under the guidelines of our limited lifetime warranty. However, it is solely at the discretion of Ray Ev whether our warranty is honored by replacement or repair. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. 1

7

8 VERTICAL BLIND GENERAL INFORMATION HEADRAIL: RE-1000 Track (clutch) available with chain rotation control and cord traverse control. Pulley provided for securing cord to wall. Wand control is a no charge option available upon request. Color available in Off White. We do not offer cord weights due to US Consumer Product Safety Commission policy. The free hanging loop in the chain or cord poses a strangulation hazard. CPSC developed a voluntary standard for window covering safety under the American National Standard Institute (ANSI) standards. This standard designated as ANSI/WCMA A100.1 American National Standard for Safety of Corded Window Covering Products. The voluntary standard requires elimination of cord loops and restriction of continuous loops and chains by way of a tension device. Please refer to Window Covering Safety Council's web site at or Consumer Product Safety Commission at to learn more about window covering safety. VALANCE: Choice of standard tailored corner or round wrapped corner for an extra charge. (Refer to price grid per price group.) **The supply of patterns and colors of all window covering products change on a normal and regular basis, often with little or no notice from companies that distribute material and components. Back-order situations do arise and may effect production times. VERTICAL BLIND MEASURING INFORMATION INSIDE MOUNT (IB): Vertical blinds require 2-7/8 window casing depth for inside mount. Width: Measure width of opening at top, center and bottom: use narrowest measurement. Do not make any width deductions. Length: Measure from top of opening to sill. To avoid blind touching the sill, deduct ¼. When ordering your blind as an Inside Mount, the factory will take the following deduction: Vertical Blinds ¼ in width and 3/8 in length Tolerance of 1/8 in width and length. OUTSIDE MOUNT (OB): Measure width and length and add the following to each side: Vertical Blinds 3 or more on each side. **Consider all obstructions (handles, cranks, window trim, carpet, etc.) when determining the measurement, and request all additional necessary mounting components when placing order. (i.e. hold down bracket, projection brackets, etc.) VERTICAL BLIND REPAIR PRICING & INFORMATION (Ray Ev s Blinds Only) Customer service must be notified before returning any product for repair or warranty work, and a repair authorization number must be issued before any repair will be done. Customers will be charged for all freight and call tag charges at the time of shipment. Level 1 Repair: $10.00 Each (Net Price) *Lengthen or Replace Chain *Shorten Vanes (up to 25 max) *Lengthen Draw Cord *Cut Valance Level 2 Repair: $15.00 Each (Net Price) *Reassemble or Restring Headrail *Cut Headrail *Shorten Vanes (26 to 100 Vanes max) *Replace Carriers (10 Stems or more, 5 Carriers or more) 2

9 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 101" 108" 114" 120" 126" 132" 138" 144" 150" 156" 162" 168" 174" 180" 186" 192" 78" N 84" " T 108" " H 120" Vanes Only February 1, 2018 ECONOMY VERTICAL BLINDS Suggested Retail Price WIDTH ("UP TO" IN INCHES) L 36" " " " " " E 72" " G 96" " " " " " Std Val

10 February 1, 2018 VERTICAL BLINDS - BRONZE EDITION Suggested Retail Price WIDTH ("UP TO" IN INCHES) 4 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 101" 108" 114" 120" 126" 132" 138" 144" 150" 156" 162" 168" 174" 180" 186" 192" 36" " " " L 60" " E 72" " N 84" " G 96" " T 108" " H 120" " " " " " Std Val Wrap Val Vanes Only

11 102" T 108" " H 120" February 1, 2018 VERTICAL BLINDS - SILVER EDITION Suggested Retail Price WIDTH ("UP TO" IN INCHES) 5 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 101" 108" 114" 120" 126" 132" 138" 144" 150" 156" 162" 168" 174" 180" 186" 192" 36" " " " L 60" " E 72" " N 84" " G 96" Vanes Only 126" " " " " Std Val Wrap Val

12 102" T 108" February 1, 2018 VERTICAL BLINDS - GOLD EDITION Suggested Retail Price WIDTH ("UP TO" IN INCHES) 6 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 101" 108" 114" 120" 126" 132" 138" 144" 150" 156" 162" 168" 174" 180" 186" 192" 36" " " " L 60" " E 72" " N 84" " G 96" Vanes Only 114" H 120" " " " " " Std Val Wrap Val

13 102" T 108" " H 120" February 1, 2018 VERTICAL BLINDS - PLATINUM EDITION Suggested Retail Price WIDTH ("UP TO" IN INCHES) 7 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 101" 108" 114" 120" 126" 132" 138" 144" 150" 156" 162" 168" 174" 180" 186" 192" 36" " " " L 60" " E 72" " N 84" " G 96" Vanes Only 126" " " " " Std Val Wrap Val

14 Crown Valance for Vertical Blind with Dust Cover SIZE UNIT PRICE UP TO 24 " 5.00 UP TO 36 " 7.50 UP TO 48 " UP TO 60 " UP TO 72 " UP TO 84 " UP TO 96 " UP TO 108 " UP TO 120 " UP TO 132 " UP TO 144 " UP TO 156 " UP TO 168 " UP TO 180 " UP TO 192 " Vertical Tracks SIZE UNIT PRICE UP TO 12 " 3.00 UP TO 24 " 6.00 UP TO 36 " 9.00 UP TO 48 " UP TO 60 " UP TO 72 " UP TO 84 " UP TO 96 " UP TO 108 " UP TO 120 " UP TO 132 " UP TO 144 " UP TO 156 " UP TO 168 " UP TO 180 " UP TO 192 " **ABOVE PRICES ARE DEALER NET PRICE - DISCOUNT DOES NOT APPLY February 1,

15 LOUVER & STACKING REQUIREMENTS FOR 3 1/2" VERTICALS SIDE DRAW SIDE DRAW CENTER OPENING Carrier # for Actual Track Actual Overall Track Length Clearance Bal-Both Sides UnBal-1 Side Carrier # for Actual Track Actual Overall Track Length Clearance Bal-Both Sides UnBal-1 Side Carrier # for Actual Track Actual Overall Track Length Clearance Each Side /4 5 1/ /4 18 1/ / / /2 4 5/ / /4 19 1/ / / /4 19 7/ / /4 7 3/ /2 20 3/ / /2 7 7/ /2 20 7/ /4 6 1/ /2 8 1/ /4 21 3/ / /4 8 3/ / /4 7 3/ /4 9 1/ / /2 7 7/ / /4 22 3/ /4 8 1/ /4 10 1/ /4 23 1/ /4 8 3/ /4 10 5/ /2 23 5/ /2 9 1/ /2 11 1/ /4 24 1/ /4 9 3/ /2 11 1/ /4 24 5/ / / /4 10 5/ / / /4 11 1/ / / /4 13 3/ /2 26 3/ / /4 13 7/ /2 26 7/ /2 12 1/ /2 14 3/ /4 27 3/ / /4 14 3/ /4 27 7/ /4 13 3/ /4 15 1/ / /2 13 7/ / /4 28 3/ /4 14 3/ / /4 29 1/ / /4 16 5/ /2 29 3/ /4 15 1/ /2 17 1/ /2 30 1/ /4 15 3/ /2 17 5/ /4 30 5/ / /4 18 1/ /4 16 5/8 9

16 Ray Ev, Inc. Date: VERTICAL BLIND ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # Ordered by: Sold To: Ship To: Changes or Cancellations will only be accepted before close of business on the order date. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject. QTY WIDTH LENGTH PATTERN & COLOR MOUNT IN/OUT STACK OW/CO TRACK TYPE VALANCE TYPE ADDITIONAL INSTRUCTIONS 10 Special Instructions:

17

18 2 & 2 ½ HORIZONTAL BLIND GENERAL INFORMATION Slat sizes: 2 Slat & 2 ½ Slat. Headrail: 2 ¼ x 1 ½ Low Profile Metal in coordinating color. Controls: Standard position is Tilt (Wand or Cord) left side and Lift Cord right side. *Reverse standard and Same-Side controls are available on Wood Blinds Only. *TRENDS (ULTIMATE) FAUX WOOD & MADISON BLINDS MUST HAVE CONTROLS ON OPPOSITE SIDES. IF SAME SIDE CONTROLS ORDERED, PLEASE NOTE ITS VOIDS WARRANTY. Cloth Tapes: Add 10% Surcharge. Routeless: Add 15% (this is NOT BLACKOUT). Tile Cut Out: $7.50 NET per side. 2 Blinds on 1 Headrail: No extra charge, price as 2 separate blinds. 3 Blinds on 1 Headrail: Add $15.00 Net extra charge, price as 3 Separate blinds. (STANDARD OUTSIDE MOUNT VALANCE RETURNS 2 ¾ Inside Mount available upon request) Wood Blinds: ROYAL CROWN (available in all wood colors) - free with blind or $2.50 Net per lineal foot as material only. Faux Wood Blinds: ULTIMATE MAJESTY (available all Faux wood colors) free with blind or $2.50 Net per lineal foot as material only. 2 SMOOTH (available upon request) - in whites only in Faux Wood material. Madison Blinds: COORDINATING 2 STANDARD VALANCE - free with blind. **To insure color matching, all blinds should be ordered for the same room at one time. **The natural beauty of wood often includes dark pigments & strong grain patterns which appear randomly throughout the blind. These are most visible in blinds finished in light colors. Slight variations in colors, as well as minimal warpage may occur. 2 & 2 ½ HORIZONTAL BLIND MEASURING INFORMATION INSIDE MOUNT (IB): When ordering your blind as an Inside Mount, the factory will take the following deduction: 2 & 2 ½ Horizontal Blinds ½ in width and 0 in length Tolerance of 1/8 width and ½ in length. OUTSIDE MOUNT (OB): Measure width and length and add the following to each side: Horizontal Blinds 1-1/2 or more on each side. **Consider all obstructions (handles, cranks, window trim, carpet, etc.) when determining the measurement, and request all additional necessary mounting components when placing order. (i.e. hold down bracket, projection brackets, etc.) 2 & 2 ½ HORIZONTAL BLIND REPAIR PRICING & INFORMATION (Ray Ev s Blinds Only) Customer service must be notified before returning any product for repair or warranty work, and a repair authorization number must be issued before any repair will be done. Customers will be charged for all freight and call tag charges at the time of shipment. Level 1 Repair: $15.00 Each (Net Price) Level 2 Repair: $25.00 Each (Net Price) *Replace Tilter *Lengthen 2 blind (up to 10 ) *Replace or Cut Bottomrail *Replace Slats in 2 blind (6 to 10 max) *Replace Slats in 2 blind (less than 5) *Replace Cord & Ladders *Shorten Blind *Reassemble or Restring Headrail *Cut Slats Add Cut Outs *Reduce Blind in Width *Change Ladder & Fabric Tapes *Change Tilter Type (Wand or Cord) *Replace or Cut Headrail 11

19 WIDTH up to: 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" LENGTH 30" $292 $337 $409 $446 $510 $564 $635 $678 $720 $806 $874 $931 $978 up to: 36" ,035 1,084 42" ,013 1,091 1,165 1,222 48" ,013 1,127 1,230 1,321 1,381 54" ,035 1,121 1,257 1,356 1,446 1,519 60" ,029 1,123 1,198 1,367 1,482 1,575 1,655 66" ,012 1,130 1,229 1,310 1,495 1,609 1,772 1,861 72" ,093 1,230 1,313 1,429 1,586 1,711 1,840 1,930 78" ,024 1,154 1,277 1,376 1,527 1,689 1,828 1,953 84" ,117 1,230 1,374 1,544 1,691 1,804 1,953 90" ,029 1,172 1,328 1,464 1,581 1,735 1,896 96" ,081 1,213 1,370 1,531 1,660 1,850 2, " ,104 1,269 1,446 1,606 1,786 1, " ,004 1,176 1,346 1,550 1,666 1, " ,050 1,230 1,370 1,606 1, " ,105 1,298 1,452 1,659 1,818 WIDTH up to: 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" LENGTH 30" $322 $370 $450 $490 $562 $621 $700 $747 $792 $886 $962 $1,024 $1,076 up to: 36" ,027 1,066 1,138 1,192 42" ,116 1,201 1,282 1,346 48" ,024 1,116 1,240 1,353 1,455 1,518 54" ,050 1,138 1,233 1,384 1,491 1,593 1,672 60" ,018 1,132 1,235 1,319 1,505 1,632 1,733 1,821 66" ,113 1,244 1,352 1,441 1,643 1,770 1,949 2,047 72" ,038 1,203 1,353 1,444 1,574 1,744 1,884 2,022 2,124 78" ,128 1,269 1,403 1,516 1,681 1,859 2,011 2,149 84" ,054 1,229 1,353 1,512 1,699 1,861 1,985 2,149 90" ,132 1,289 1,461 1,612 1,740 1,907 2,084 96" ,000 1,190 1,334 1,508 1,685 1,826 2,036 2, " ,042 1,215 1,397 1,593 1,769 1,965 2, " ,104 1,295 1,480 1,706 1,832 2, " ,155 1,353 1,508 1,769 1, " 928 1,028 1,216 1,429 1,597 1,825 2,001 WIDTH up to: 2" TREASURES (TRADITIONAL) WOOD BLINDS Suggested Retail Price 2-1/2" TREASURES (TRADITIONAL) WOOD BLINDS Suggested Retail Price MADISON 2" VINYL BLINDS Suggested Retail Price 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" LENGTH 30" $209 $257 $299 $337 $373 $413 $476 $504 $533 $555 $602 $622 up to: 36" " " " " " " " " " " We strongly recommend that the size of any 2" & 2-1/2" Horizontal Blind that falls into the shaded area of the above charts should be priced and ordered as 2 separate blinds. Single blinds made from within this shaded area can be manufactured, but any warranty of the product will be void. February 1,

20 WIDTH up to: LENGTH 30" 2" TRENDS FAUX WOOD (ULTIMATE) BLINDS Suggested Retail Price 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" $211 $280 $348 $379 $409 $462 $520 $563 $579 $609 $648 $684 up to: 36" " " " ,032 1,099 60" ,014 1,059 1,124 1,198 66" ,051 1,103 1,165 1,233 1,310 72" ,031 1,117 1,185 1,239 1,311 1,401 78" ,058 1,153 1,267 1,325 1,406 1,501 84" ,013 1,122 1,233 1,360 1,422 1,517 90" ,071 1,211 1,309 1,442 1,501 96" ,124 1,239 1,398 1,535 WIDTH up to: LENGTH 30" 2-1/2" TRENDS FAUX WOOD (ULTIMATE) BLINDS Suggested Retail Price 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" $243 $323 $400 $437 $470 $530 $597 $648 $666 $701 $747 $788 up to: 36" " ,005 48" ,054 1,136 54" ,015 1,074 1,121 1,189 1,264 60" ,101 1,168 1,218 1,294 1,378 66" ,094 1,209 1,268 1,341 1,418 1,507 72" ,077 1,186 1,283 1,363 1,424 1,508 1,613 78" ,103 1,216 1,325 1,459 1,524 1,617 1,727 84" ,019 1,165 1,289 1,418 1,565 1,636 1,744 90" ,079 1,232 1,393 1,505 1,659 1,727 96" ,123 1,294 1,424 1,610 1,766 We strongly recommend that the size of any 2" Horizontal Blind that falls into the shaded area of the above charts should be priced and ordered as 2 separate blinds. Single blinds made from within this shaded area can be manufactured, but any warranty of the product will be void. February 1,

21 Ray Ev, Inc. 2 Trends (Ultimate) Fauxwood Blinds 2 ½ Trends (Ultimate) Fauxwood Blinds Date: 2 & 2 ½ HORIZONTAL BLIND ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # 2 Treasures Wood Blinds Ordered by: 2 ½ Treasures Wood Blinds Madison Blinds Sold To: Ship To: Changes or Cancellations will only be accepted before close of business on the order date. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject. QTY WIDTH LENGTH COLOR MOUNT IN/OUT LIFT L/R TILT L/R CORD TILT ROUTELESS CLOTH TAPE VALANCE TYPE ADDITIONAL INSTRUCTIONS 14 Special Instructions:

22 MINI MIZER BLINDS Suggested Retail Price WIDTH 23" 26" 29" 32" 36" 40" 44" 48" 52" 57" 62" 67" 72" 82" 92" 102" 112" 119" 42" $136 $151 $159 $172 $192 $208 $225 $238 $257 $288 $305 $328 $344 $391 $428 $565 $606 $667 L 48" E 54" N 60" G 66" T 72" H 78" ,053 84" ,028 1,116 90" ,001 1,080 1,183 96" ,053 1,141 1,245 Installation of blinds over 96" wide is best done by two people. We strongly recommend that the size of Mini Blind that falls into the shaded area should be ordered as 2 on 1 blind. Single blind made from within this shaded area can be manufactured, but any warranty of the product will be void. 1" MINI BLIND GENERAL INFORMATION Headrail: 1" x 1" Bottomrail: Open C style Brackets: Box style Controls: Standard positions are tilt wand on the left and lift cord on the right. You may elect to reverse the standard positions or put both controls on one side. Valance: 2 Slat at no charge or Inserted Channel style for 10% extra charge. Cut-Outs: Bottom corner 6" wide or less - Add $7.50 Net per side. Bottom corner greater than 6" wide - Add $10.00 Net per side. Bottom center - Add $11.50 Net Special Requests: Restrictions: Hold-down brackets (no charge) Blinds under 13" will have Center tilt only - Add $10 Net Extension Brackets (no charge) Blinds under 20" must have controls on opposite sides. 3/8" shims (no charge) Two on One Headrail - Add $11.50 Net Three on One Headrail - Add $15.00 Net 1" MINI BLIND MEASURING INFORMATION INSIDE MOUNT (IB): When ordering your blind as an Inside Mount, the factory will take the following deduction: 1" Horizontal Blinds - 3/8" width and 0 in length - Tolerance of 1/8" in width and 1/2" in length. OUTSIDE MOUNT (OB): Measure width and length and add the following to each side: 1" Horizontal Blinds - 1-1/2" or more on each size. **Consider all obstructions (handles, cranks, window trim, carpet, etc.) when determining the measurement, and request all additional necessary mounting components when placing order. (i.e. hold down bracket, projection brackets, etc.) 1" MINI BLIND REPAIR PRICING & INFORMATION (Ray Ev's Blinds Only) Customer service must be notified before returning any product for repair or warranty work, and a repair authorization number must be issued before any repair will be done. Customers will be charged for all freight and call tag charges at the time of shipment. Level 1 Repair: $10.00 Each (Net Price) Level 2 Repair: $15.00 Each (Net Price) *Replace Tilter *Lengthen 1" blind (up to 15") *Replace Cordlock *Replace Slats in 1" blind (11 to 25 max) *Replace or Cut Bottomrail *Replace Cords & Ladders *Replace Slats in 1" blinds (less than 10) *Replace or Cut Headrail *Shorten Blind *Reassemble or Restring Headrail *Cut Headrail 15 February 1, 2018

23 Ray Ev, Inc. Date: MINI BLIND ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # Ordered by: Sold To: Ship To: Changes or Cancellations will only be accepted before close of business on the order date. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject. QTY WIDTH LENGTH COLOR NAME & NUMBER MOUNT IN/OUT CORD L/R TILT L/R VALANCE YES / NO ADDITIONAL INSTRUCTIONS 16 Special Instructions:

24 Drapery Fabrication Policy Ray Ev offers drapery manufacturing of Customer s Own Material (COM). Please follow our guideline on the drapery fabrication to ensure the quality of a finished good. Ray Ev will not be responsible for the design of your drapery. When supplying us with your own fabric (COM), we are hired to sew panels only. You are responsible for the design of a finished product. Ray Ev will not be responsible for customer s own fabric. We will inspect fabrics to the best of our ability. We will not be responsible for fabric quality and/or the performance of the fabric, such as flaws, imperfections, stretching and flaring. When purchasing your own fabric, you are responsible for the quality of the product. Ray Ev will not be responsible for shortage sent from the mills. When purchasing your own fabric, you are responsible for yardages needed to complete a finished product. Ray Ev will not be responsible for left over customer s own fabric. The left over fabric should be pickup upon will call, delivery or ship at your freight expense. Please make an arrangement with Customer Service Department how you would like to receive the left over fabric. Ray Ev will not be responsible for fabric marked or tagged Extra Fabric. Regarding Custom Drapery orders made from special order fabrics, PLEASE DO NOT SEND ANY OF THE EXTRA FABRIC TO US THAT YOU HAVE ORDERED FOR YOUR CUSTOMER. INSTEAD, HAVE THAT EXTRA YARDAGE SENT DIRECTLY TO YOUR FACILITY. Some customers mark their work orders save extra fabric or call us after receiving the drapes inquiring on the extra fabric. We don t necessarily receive extra fabric. If we catch a flaw in the fabric, we will assume that you sent extra yardage due to the flaw or that the mill has not made a straight cut and the extra fabric was to make up for the uneven cutting. Whatever the factor is, we can t be responsible for tagging and keeping track of extra fabric after a job has been cut. For those of you with bins, we will do our best to put the extra fabric in your bin; however, any fabric left for more than 30 days will be at your own risk. Scraps of 1 yard or less are put into the scrap bin. You are welcome to search through the scrap bin at any time. For best results, you should claim any extra fabric within 10 days or less. Ray Ev provides standard pin setting and will not be responsible for errors on pin settings. Be aware that standard pinning of drapes is as follows..for wall pinning, the pinner is always set to 1 ¾ and for ceiling pinning, the pinner is always set to 1 ¼. We use a standard Kirsch pinner. All drapes over 90 in length will automatically be pinned for ceiling and all other lengths will automatically be pinned for wall. IF YOU REQUIRE ANY OTHER TYPE OF PIN SETTING, PLEASE ORDER YOUR DRAPES WITHOUT PINS. Your installer can then pin the drapes to whatever setting he desires. Please understand that all pinners are not made the same and can have different settings considered as wall or ceiling. All rods and hardware are not made the same and can vary in size and settings. Your installer may have his or her own version of the different pin settings. By ordering your drapes without pins for all you special needs, you can get the he exact setting you want, thereby eliminating any mis-understanding. 17

25 DRAPERY GENERAL INFORMATION COMMERCIAL PINCH PLEATED & ROD POCKETED DRAPERY FULLNESS: 200%. For fuller drapes other than Ready-Made Drapes, please specify number of widths required. Hems: Ready-Made Draperies are made with a 3 double hem. All other commercial draperies are made with a 4 double hem. Side hems are 1 ½. Headings: All commercial (including ready-made) drapes are made with a 4 single heading, using quality washable buckram. 5 headings may be requested for an additional charge. Overlaps & Returns: Standard are 3 ½. No charge for special size requests. Rod Top Only Draperies: Include 4 Double Hem, 1 ½ Pocket and 1 ½ Ruffle. Rod Top & Bottom Draperies: Include 1 ½ Pocket and 1 ½ Ruffle. RAY EV OFFERS VARIOUS PLEAT STYLES. CALL CUSTOMER SERVICE FOR SAMPLES. CUSTOM SIZE DRAPERY When ordering custom size drapery, please provide following information: 1. Specify fabric type. (Ray Ev Fabric or Customers Own Material) 2. Indicate if ordering by your rod size or finished pleat-to size. (If ordering by rod size, we will add 5 to the measurement for a panel or 12 to the measurement for a pair to get the finished pleat to size.) 3. Indicate if drape is pair (center open) or panel (one-way draw) left or right. 4. Indicate if any special returns or overlaps are required. 5. Specify finished length. 6. Specify number of widths desired if other than indicated by the price charts. 7. Indicate if special hems or heads are needed. 8. Indicate wall, ceiling or deco pinning. (You may have to adjust.) DRAPERY MEASURING INFORMATION Existing Hardware 1. Measure the face of the rod from tip to tip only. Do not wrap the tape around the end of the rod and include the brackets. This is your rod size. 2. Measure the bracket extension separately to be sure you do not need special returns on the drape. If larger than 3-1/2, be sure to indicate the size return when ordering the drape. 3. Determine the length of the drapery by measuring from the top of the rod to 4 below the sill, or ¾ above the floor for floor-length draperies. 4. Determine if the rod is a one-way pull or center opening. New Hardware 1. Rods are usually installed 3 beyond each side of the window or more. Typically, the rod size should be the actual window plus wall space of the area you wish to cover. 2. Rods are usually installed 4 above the top of the window and the drapery should hang at least 4 below the sill or ¾ above the floor. 18

26 (48" Fabric) 2 1/2 X's Fullness PLEAT TO WIDTHS (48" Fabric) 3 X's Fullness PLEAT TO WIDTHS (54" Fabric) 2 1/2 X's Fullness PLEAT TO WIDTHS (54" Fabric) 3 X's Fullness PLEAT TO WIDTHS " Fabric Pleated to 2 X's fullness = 23" Panels 48" Fabric Pleated to 2 1/2 X's fullness = 19" Panels 54" Fabric Pleated to 2 X's fullness = 26" Panels 54" Fabric Pleated to 2 1/2 X's fullness = 21" Panels 60" Fabric Pleated to 2 X's fullness = 29" Panels 60" Fabric Pleated to 2 1/2 X's fullness = 23" Panels 48" Fabric Pleated to 3 X's fullness = 15" Panels 54" Fabric Pleated to 3 X's fullness = 17" Panels 60" Fabric Pleated to 3 X's fullness = 19" Panels PLEAT TO / FULLNESS CHARTS STACK BACK CHART TOTAL STACK-BACK ROD LENGTH AND DRAPERY IF THE GLASS IS SHOULD BE COVERAGE SHOULD BE 38 inches 26 inches 64 inches NOTE: You will have to ADD RETURNS AND OVERLAPS TO DRAPERY COVERAGE. THIS CHART IS BASED ON AVERAGE PLEATING AND MEDIUM WEIGHT FABRIC. 19

27 DRAPERY FABRICATION LABOR Dealer Net Price COMMERCIAL DRAPERY LABOR PER WIDTH STANDARD FABRIC LABOR... $12.00 (STANDARD FABRIC INCLUDES MERCEDES, ALPHA, ENCORE & DOBBY) MERIT, KINGSLEY, MISTY, VOILE & BATISTE FABRIC LABOR... $12.00 CUSTOM DRAPERY LABOR UNLINED PER WIDTH LINED PER WIDTH STANDARD FABRICS.$16.00 $17.00 STANDARD FABRICS WITH CUSTOMER S OWN GROMMETS SHEER FABRICS LACE FABRICS BLACKOUT LINED DRAPES INTERLINED BLACKOUT LINERS SURCHARGES DRAPERIES OVER 100 LONG... $2.00 PER FOOT MAKE & SEW BANDING PER FOOT SEW ON TRIM OR TASSEL PER FOOT 5 HEADINGS PER WIDTH TIE BANDS EACH CUT-OUT (FROM BOTTOM) SEW ON RINGS EACH MEMORY STITCHING PER WIDTH RIP APART (DRAPERIES MUST BE DRY CLEANED PRIOR TO ANY WORK DONE) PER WIDTH 7.00 PER WIDTH Ray Ev will not be responsible for customer s own goods. Ray Ev will inspect and measure to the best of our ability. Ray Ev will not be responsible for flaws or content of fabric which may affect the performance of customer s own goods. FABRIC Dealer Net Price STYLE NUMBER FABRIC NAME COLOR WIDTH PRICE PER YARD 6490 Mercedes SLR Flax $ Alpha (Antique Satin) Off White 48 $ Dobby Natural 48 $ Batiste (118 Sheer) White or Off White 118 $ Merit Flax 48 $ Kingsley White, Off White or Ecru 54 $ Misty Sand, Snow, Off White, Glow, Prairie, Avocado, Mist, Vade, Burgundy, Brown, Sepia or Mulberry 54 $ Voile (118 Sheer) White or Off White 118 $ Standard Lining White or Off White 54 $ Luxury Lining White or Off White 54 $ Blackout Lining White or Off White 54 $ Thermal Lining White 54 $ Interlining White 54 $4.00 **VARIOUS PLEAT STYLES AVAILABLE February 1,

28 READY MADE DRAPERIES Dealer Net Price (Refer to Mercedes Unlined Chart) PANELS PAIRS ROD SIZE FINISHED FINISHED STYLE #6490 CODE NO. CODE NO. (INCHES) PANEL PAIR MERCEDES X X x 44 $ X X X 44 $ X X X 44 $ X X X 44 $ X X X 44 $ X X X 44 $ X X X 44 $ X X x 56 $ X X X 56 $ X X X 56 $ X X X 56 $ X X X 56 $ X X X 56 $ X X X 56 $ X X X 56 $ X X x 68 $ X X X 68 $ X X X 68 $ X X X 68 $ X X X 68 $ X X X 68 $ X X X 68 $ X X x 84 $ X X X 84 $ X X X 84 $ X X X 84 $ X X X 84 $ X X X 84 $ X X X 84 $ X X X 84 $ X X X 84 $ WHEN ORDERING READY-MADE DRAPERIES : Indicate the product by using the code numbers located on the left-hand side of the price chart. The codes consist of the rod size and finished length followed by a "1" for a panel or a "2" for a pair. February 1,

29 PINCH PLEATED, ROD POCKETED & TAB TOPPED DRAPERIES Dealer Net Price WIDTH MERCEDES - UNLINED ( 2 Times Fullness ) 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH ALPHA DOBBY - UNLINED (2 Times Fullness) 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH BATISTE (118" SHEER) - UNLINED (2 Times Fullness) 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " February 1,

30 PINCH PLEATED, ROD POCKETED & TAB TOPPED DRAPERIES Dealer Net Price WIDTH MERIT KINGSLEY MISTY - UNLINED (2 1/2 Times Fullness) 0" - 19" 20" - 38" 39" - 57" 58" - 76" 77" - 95" 96" - 114" 115" - 133" 134" - 152" 153" - 171" 172" - 190" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 24" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH VOILE (118" SHEER) - UNLINED (2 1/2 Times Fullness) 0" - 19" 20" - 38" 39" - 57" 58" - 76" 77" - 95" 96" - 114" 115" - 133" 134" - 152" 153" - 171" 172" - 190" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 24" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH BLACKOUT LINER (2 Times Fullness) 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 24" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " February 1,

31 PINCH PLEATED, ROD POCKETED & TAB TOPPED DRAPERIES Dealer Net Price WIDTH 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " WIDTH STANDARD LINING ( Add to Cost of Drapery ) LUXURY LINING ( Add to Cost of Drapery ) BLACKOUT LINING ( Add to Cost of Drapery ) THERMAL LINING ( Add to Cost of Drapery ) 0" - 24" 25" - 49" 50" - 75" 76" - 99" 100" - 122" 123" - 146" 147" - 170" 171" - 193" 194" - 218" 219" - 243" UP TO 1 W 2 W 3 W 4 W 5 W 6 W 7 W 8 W 9 W 10 W F L 14" I E 36" N N 48" I G 60" S T 72" H H 84" E 96" D 108" " February 1, 2018

32 Ray Ev, Inc. Date: CUSTOM DRAPERY ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # Ordered by: Sold To: Ship To: Widths of at = Yards of at = Widths of at = Yards of at = Widths of at = Yards of at = Ray Ev will not be responsible for customer s own fabric due to defects & various contents that can affect the stability and hanging of fabric. Ray Ev will not be responsible for customer s own fabric sent by mills with flaws and defects. Ray Ev is only responsible for fabrication of the drapery. Production begins on the day your fabric is received by the factory. Changes or Cancellations cannot be accepted once production begins. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject. Fabric Name Fabric Width Rod Size Panel Pair Overlap Size Return Size Pleat To Finished Length # of Widths Type of Lining Head Size Hem Size Pin Position # of Widths Billed 25 Special Instructions: LABOR BILLING: ORDERS ARE BILLED ON 48 FABRIC

33

34 Roman Shade Labor Policy Ray Ev offers Roman Shade manufacturing of Customer s Own Material (COM). Please follow our guideline on the Roman Shade labor to ensure the quality of a finished good. Ray Ev will not be responsible for the design of your Roman Shade. When supplying us with your own fabric (COM), we provide the labor of making Roman Shade. You are responsible for the design of a finished product. Ray Ev will not be responsible for customer s own fabric. We will inspect fabrics to the best of our ability. We will not be responsible for fabric quality and/or the performance of the fabric, such as flaws, imperfections, stretching and flaring. When purchasing your own fabric, you are responsible for the quality of the product. Ray Ev will not be responsible for fabric shortage sent from the mills. When purchasing your own fabric, you are responsible for yardages needed to complete a finished product. Ray Ev will not be responsible for left over customer s own fabric. The left over fabric should be pickup upon will call, delivery or ship at your freight expense. Please make an arrangement with Customer Service Department how you would like to receive the left over fabric. Ray Ev will not be responsible for fabric marked or tagged Extra Fabric. Regarding Custom Roman Shade orders made from special order fabrics, PLEASE DO NOT SEND ANY OF THE EXTRA FABRIC TO US THAT YOU HAVE ORDERED FOR YOUR CUSTOMER. INSTEAD, HAVE THAT EXTRA YARDAGE SENT DIRECTLY TO YOUR FACILITY. Some customers mark their work orders save extra fabric or call us after receiving the roman shade fabric inquiring on the extra fabric. We don t necessarily receive extra fabric. If we catch a flaw in the fabric, we will assume that you sent extra yardage due to the flaw or that the mill has not made a straight cut and the extra fabric was to make up for the uneven cutting. Whatever the factor is, we can t be responsible for tagging and keeping track of extra fabric after a job has been cut. For those of you with bins, we will do our best to put the extra fabric in your bin; however, any fabric left for more than 30 days will be at your own risk. Scraps of 1 yard or less are put into the scrap bin. You are welcome to search through the scrap bin at any time. For best results, you should claim any extra fabric within 10 days or less. 26

35 CUSTOM ROMAN SHADE GENERAL INFORMATION Shade Styles: 301 Flat Pleated Shade 302 Soft Fold Shade 303 Front Pleated Shade 304 Front & Back Pleated Shade 305 Flat Shade 306 Grommet Shade 307 Relaxed Shade 308 Relaxed with Tails Shade 309 Balloon (Single Pouf) Shade 310 Balloon (Multi-Pouf) Shade Standard Specifications: Cord Lock / Cord Pulley System: Headrail, 1-1/2 depth x ¾ height. Standard Lining: Off White or White available. Color Coordinating Cords & Tassels. Cord & Pulley available upon request is a no charge option. Continuous chain (Clutch) available upon request. Refer to the surcharges. Size Limitations: Minimum Width: 8 Maximum Width: No Limitations Minimum Height: 8 Maximum Height: No Limitations Measuring Notes: The workroom will deduct 3/8 from the width for inside mount. Stacking Dimensions: Styles: Height To: Stack To: Styles Height To: Stack To: Note: Stacking heights are approximate. Installation Brackets: L Brackets: The L bracket is an alternative outside mount bracket for all shades. 2 Screws: A quick and easy alternative inside mount installation method. Simply screwed straight up through the headrail. Options: 6 Classic Valance Roman Shades may be ordered with a 6 classic valance. The valance will hang off the front of the headrail, cord forward is suggested (See Surcharge). 27

36 Valance Returns: Valance returns are an option on all shades ordered with a valance. Customer request required. Lining: Regular lining is standard on all shades. Blackout lining may be ordered for an additional charge. Accents Banding: Fabric Roman Shades may have fabric strips sewn to the edges and bottoms of the shade and valance. Refer to surcharges. Decorative Trimmings: Decorate Trimmings (fringe, gimp, beads and tassels) can be added as a beautiful accent across the bottom of the shade and/or valance. Ray Ev does not provide Decorative Trimmings. Refer to surcharges. Multiple Shades on One Headrail: Two-on-one & Three-on-one are multiple shades mounted on a single headrail. For inside mount shades the workroom will deduct 3/8 in width for clearance. The space between shades is approximately 1/2. Price as separate shades then adds the Two-on-one or Three-on-one surcharge. Turned Headrail: A Turned Headrail makes the headrail s depth ¾ and the height 1-1/2. This is most commonly done in cases of limited mounting depth and is a no charge option. 2 screws are offered for outside mount. Oversized Headrails: The standard headrail on a shade is ¾ tall and has a depth of 1-1/2. Larger depths of 2-1/2, 3-1/2 or 5-1/2 are available. Hold Down Brackets: Hold Down Brackets are used to secure the bottom of the shade. They are most commonly used when a shade is mounted on a door. Hold Down Brackets are no charge option. Holds down brackets are not recommended for inside mounted shades. Hold down brackets must be requested when ordering. 28

37 LINED ROMAN SHADES $ 9.50 PER SQ FT BLACKOUT LINED ROMAN SHADES $10.50 PER SQ FT INTERLINED ROMAN SHADES $12.50 PER SQ FT BLACKOUT INTERLINED ROMAN SHADES $15.00 PER SQ FT 6" CLASSIC VALANCE (FOR CORDS FORWARD SHADES) 20% UP-CHARGE PER SHADE MAKE & SEW ON BANDING $ 4.50 PER LINEAL FOOT SEW ON DECORATIVE TRIM $ 3.00 PER FOOT SURCHARGES CLUTCH / CONTINUOUS CHAIN: R16 CLUTCH (SHADE WIDTH 20" - 60") 2-1/2" Board. $45.00 PER SHADE R24 CLUTCH (SHADE WIDTH 60" - 100") 3-1/2" Board.. $65.00 PER SHADE SPRING ASSIST (RECOMMENDED FOR SHADES OVER 100"). $95.00 PER SHADE CORDLESS ROMAN SHADES MINIMUM WIDTH 25" - 60" (2-1/2" Board) MAXIMUM WIDTH 60" - 80" (2-1/2" Board).. (MAXIMUM LENGTH FOR CORDLESS ROMAN SHADE IS 80") $45.00 PER SHADE $60.00 PER SHADE MULTIPLE SHADES ON ONE HEADRAIL 2-ON-1 HEADRAIL $50.00 PER SHADE 3-ON-1 HEADRAIL $75.00 PER SHADE SHADE LENGTH CUSTOM ROMAN SHADE LABOR Dealer Net Price NOTE: Ray Ev will not be responsible for customer s own goods. Ray Ev will inspect and measure to the best of our ability. Ray Ev will not be responsible for flaws or content of fabric which may affect the performance of customer s own goods. SQUARE FOOTAGE CHART SHADE WIDTH in inches in inches /4 12 1/2 13 3/ /4 17 1/2 18 3/ /4 22 1/2 23 3/ /4 27 1/2 28 3/ / / / / / / / / / /2 12 1/ /4 17 1/2 19 1/ /4 24 1/2 26 1/ /4 31 1/2 33 1/ /4 38 1/2 40 1/ /4 13 1/2 15 3/ /4 22 1/2 24 3/ /4 31 1/2 33 3/ /4 40 1/2 42 3/ /4 49 1/2 51 3/ / / / / / / / / / / /4 16 1/2 19 1/ /4 27 1/2 30 1/ /4 38 1/2 41 1/ /4 49 1/2 52 1/ /4 60 1/2 63 1/ /4 19 1/2 22 3/ /4 32 1/2 35 3/ /4 45 1/2 48 3/ /4 58 1/2 61 3/ /4 71 1/2 74 3/ / / / / / / / / / / /4 22 1/2 26 1/ /4 37 1/2 41 1/ /4 52 1/2 56 1/ /4 67 1/2 71 1/ /4 82 1/2 86 1/ /4 25 1/2 29 3/ /4 42 1/2 46 3/ /4 59 1/2 63 3/ /4 76 1/2 80 3/ /4 93 1/2 97 3/ / / / / / / / / / / /4 28 1/2 33 1/ /4 47 1/2 52 1/ /4 66 1/2 71 1/ /4 85 1/2 90 1/ / / / /4 31 1/2 36 3/ /4 52 1/2 57 3/ /4 73 1/2 78 3/ /4 94 1/2 99 3/ / / / / / / / / / / / / / /4 34 1/2 40 1/ /4 57 1/2 63 1/ /4 80 1/2 86 1/ / / / / / / February 1,

38 MOTORIZED ROMAN SHADES GENERAL INFORMATION & SURCHARGES Frequently Asked Questions: What do you mean by "pre-programmed"? All motorized are "plug and play". That means after you install the shade, just press the remote and the shade works. Even multi-shade orders will be pre-programmed and ready to use. Do I need electrician? No. Simply plug the battery pack into the shade. For Plug-in (110 Volt), plug the unit into a standard wall outlet or it can be hard wired into the wall by an electrician. What size board is used for motorized Roman Shades? 2-1/2" for Battery operated motor 3-1/2" for Plug-in (110 Volt) 18" for Minimum Width for Battery Motor Dealer Net Price Somfy Products Hardwired / Plug-in (110 Volt) Battery Shade Size Roman Shade (Max size 60" X 60") $ 250 ***see limitations 30" to 75"wide $385 NOTE: This price does not include remote control transmitter. 76" to 130" $ " & 150" $480 (5 year manufacturer warranty) Remote Control Dealer Net Price: 1 Channel Transmitter 1-4 Channel Transmitter 1-16 Channel Transmitter 1 Channel (Wireless) Wall Switch 1-4 Channel (Wireless) Wall Switch $55.00 $75.00 $ $ $ (Different colors of Transmitter available upon request at additional charge.) 1 - Timer $ Solar Panel available for Battery Operated Motors only $ Additional Battery Wand (Lithium Batteries included) $55.00 Coupler for 2 on 1 Motorized Shade $75.00 *** Limitations for Battery Motor for Roman Shade Roman Shade 60" x 60" Regular Lining (Shade must be up to 8 pounds) Roman Shade 50" x 60" Blackout Lining (Shade must be up to 8 pounds) Cord Size for plug-in motor is 6 ft. at no charge. Longer cord sizes available upon request for an additional charge, please call Customer Service Department. February 1,

39 ROMAN SHADE STYLES 301 Flat Pleated Shade The 301 Shade is a simple, flat style, with rear-facing stay pockets that add detail to the front of the shade. All shades have variation on pleating size and bottom pleat may vary. Face fabric 5/8" Pocket pleat Pleat size from 7 to 8 Bottom size from 4 ½ to 5 ½ 302 Soft Fold Shade The 302 Shade has a tailored yet soft appearance. The face fabric hangs down in a gentle fold at each pleat. Hobbling the face fabric onto the lining fabric at regular intervals creates overlapping folds that cascade from top to bottom. Because the lining is essential to the hobbling, this shade is always lined. All shades have variation on pleating size and bottom pleat may vary. Lining Face fabric Pleat size from 6 to 7 5/8 Pocket pleat Bottom size from 4 ½ to 5 ½ 31

40 Suggested Yardage for 301 Flat Pleated Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 YD 2 1/4 3 1/4 4 1/ /4 2 1/2 3 3/ /2 2 3/ / / /4 6 1/ /4 3 1/2 5 1/ /4 5 1/2 7 1/ /4 8 1/ /4 4 1/2 6 1/2 8 3/ /2 4 3/ / / /4 10 1/ /4 5 1/ / /4 8 1/2 11 1/ /4 6 1/2 9 1/2 12 3/ /2 6 3/ / / / /4 7 1/ / /4 11 1/2 15 1/ /4 8 1/4 12 1/2 16 1/ /2 8 3/ / / / /4 9 1/ / /4 14 1/2 19 1/ / /4 10 3/4 15 1/2 20 1/2 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) Suggested Yardage for 302 Soft Fold Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 1/2 YD 2 3/ / /4 3 1/4 4 3/4 6 1/ /4 5 1/2 7 1/ /4 4 1/4 6 1/4 8 1/ /2 4 3/ / /4 5 1/4 7 3/4 10 1/ /4 5 1/2 8 1/ /4 6 1/2 9 3/ / / /4 7 1/2 11 1/ / /4 8 1/2 12 1/2 16 3/ / /4 17 3/ /4 9 1/ / /4 19 1/ /4 10 1/4 15 1/2 20 1/ /2 10 3/4 16 1/4 21 1/ /4 11 1/4 16 3/4 22 1/ /4 17 1/2 23 1/ /4 12 1/4 18 1/4 24 1/ /2 12 3/ / /4 13 1/4 19 3/4 26 1/ /4 20 1/2 27 1/ /4 14 1/2 21 3/4 29 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) 32

41 303 Front Pleated Shade The 303 Shade is a simple, flat style, with front-facing stay pockets that add detail to the front of the shade. When the shade is raised, it has a tighter stack. This style can be made up in any type of fabric. Large prints are interrupted by the stay pockets. All shades have variation on pleating size and bottom pleat may vary. Face of shade 5/8 Pocket seam Pleat size from 7 to 8 Bottom size from 4 ½ to 5 ½ 304 Front & Back Pleated Shade The 304 Shade a simple, flat style, with rear & front stay pockets that add detail to the front of the shade. When the shade is raised, it has a tighter stack (the amount of vertical space taken up by the raised shade) than our other styles. This style can be made up in any type of fabric. Large prints are interrupted by the stay pockets. All shades have variation on pleating size and bottom pleat may vary. Front of Shade Front pocket pleat Back pocket pleat Pleat size from 5 to 6 Bottom size from 4 to 5 ½ 33

42 Suggested Yardage for 303 Front Pleated Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 1/4 YD 2 1/4 3 1/2 4 1/ /2 2 3/ / /2 3 1/4 4 3/4 6 1/ /4 3 1/2 5 1/4 6 3/ /4 5 3/4 7 3/ /4 4 1/4 6 1/2 8 1/ /4 4 3/ / / / /4 5 1/2 8 1/4 10 3/ /4 8 3/4 11 1/ /4 6 1/4 9 1/4 12 1/ /4 6 3/ / / /2 13 3/ /4 7 1/ / /4 11 3/4 15 1/ /4 12 1/4 16 1/ /4 8 1/2 12 3/ / /2 17 3/ /4 9 1/ / /4 14 1/2 19 1/ /4 15 1/4 20 1/ /4 10 1/2 15 3/4 20 3/ /2 10 3/4 16 1/4 21 3/ /4 11 1/ / /4 11 3/4 17 1/2 23 1/ ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) Suggested Yardage for 304 Front & Back Pleated Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 1/2 YD 2 1/2 3 3/4 4 3/ / /4 5 1/ /4 3 1/ / /4 5 1/ / /2 4 1/2 6 3/4 8 3/ / /4 9 1/ /4 5 1/4 7 3/4 10 1/ /4 8 1/ / / /2 6 1/2 9 1/2 12 1/ / /4 13 1/ /4 7 1/4 10 3/ /2 11 1/ / / /4 8 1/2 12 1/2 16 1/ /2 8 3/ / /4 9 1/4 13 3/ /2 14 1/4 18 3/ / /4 19 1/ /4 10 1/2 15 1/2 20 1/ /2 10 3/ / / /2 17 1/4 22 3/ /4 23 1/ /4 12 1/4 18 1/4 24 1/4 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) 34

43 305 Flat Shade The 305 Shade is one square panel of fabric with stays to keep the panel flat when the shade is up or down, large prints are displayed to their best advantage with this style. Small tack stitches (made to attach the cord rings) are visible on the face of the shade, and add character. This shade is an ideal style choice for fabrics with large prints or scenic patterns. Pleat size from 7 to 8 Metal ring Face of shade Bottom size from 4 to 5 ½ 306 Grommet Shade The 306 Shade has one grommet pocket between two pleats of equal size. The stays on this shade are clear aluminum. The shade's lifting cords are routed through the grommets. Large prints are interrupted by the grommeted folds at the back of the shade. This shade can be made up in any fabric. However, if the fabric is sheer, the shade must be lined or the face fabric will tear at the grommets. All shades have variation on pleating size and bottom pleat may vary. Grommet Front of shade 1 ½ Deep pleat Pleat size from 7 to 8 Bottom size from 4 to 5 ½ 35

44 Suggested Yardage for 305 Flat Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 YD /4 2 1/4 3 1/4 4 1/ /4 2 1/2 3 3/ /2 2 3/4 4 1/4 5 1/ / / /4 3 1/ / /4 5 1/2 7 1/ /4 7 3/ /4 4 1/4 6 1/4 8 1/ /4 4 1/2 6 3/ /2 4 3/ / / / /4 5 1/ / /4 5 1/2 8 1/ /4 11 3/ /4 6 1/4 9 1/4 12 1/ /4 6 1/2 9 1/2 12 3/ /2 6 3/ / / / /4 7 1/4 10 3/4 14 1/ /4 7 1/2 11 1/ /4 11 3/4 15 1/ /4 8 1/2 12 1/2 16 3/ /2 8 3/ / / /4 17 3/4 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) Suggested Yardage for 306 Grommet Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 1 YD 2 1/4 3 1/4 4 1/ /2 2 3/ / / / /4 3 1/2 5 1/ /4 5 3/4 7 1/ /4 4 1/4 6 1/4 8 1/ /4 4 3/ / / / /4 5 1/2 8 1/4 10 3/ /4 8 1/2 11 1/ /4 9 1/4 12 1/ /4 6 1/2 9 3/ / /2 13 3/ /4 7 1/ / /4 11 1/2 15 1/ /4 8 1/2 12 3/ / /4 17 3/ /4 9 1/ / /4 9 3/4 14 1/2 19 1/ /4 10 1/2 15 3/4 20 3/ /2 10 3/4 16 1/4 21 3/ /4 11 1/ / /4 11 1/2 17 1/ /4 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) 36

45 307 Relaxed Shade The 307 Shade is one square panel of fabric with just one oval rod on the bottom to keep the panel flat when the shade is down, large prints are displayed to their best advantage with this style. All shades have variation on pleating size and bottom pleat may vary. Pleat size from 7 to 8 Metal ring Bottom size from 4 ½ to 5 ½ 308 Relaxed with Tails Shade The 308 Shade is made with a square flat fabric panel. The narrow tucked side panels are created by tacking the fabric to the lining at each pleat. Side panels are 5 to 9 in width. When made with soft, pliable fabrics, this shade swags gracefully in the center. This style is a good choice for fabrics with large scale or scenic patterns that look best without interruption. The finished height is measured from the top of the shade to the top of the center swag. It does not include the swag or tails. Metal rings A Pleat size from 6 to 7 Finish length is from A to B B 37

46 Suggested Yardage for 307 Relaxed Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 144 SHADE HEIGHT YARDS 20" 1 YD /4 2 1/4 3 1/4 4 1/ /4 2 1/2 3 3/ /2 2 3/4 4 1/4 5 1/ / / /4 3 1/ / /4 5 1/2 7 1/ /4 7 3/ /4 4 1/4 6 1/4 8 1/ /4 4 1/2 6 3/ /2 4 3/ / / / /4 5 1/ / /4 5 1/2 8 1/ /4 11 3/ /4 6 1/4 9 1/4 12 1/ /4 6 1/2 9 1/2 12 3/ /2 6 3/ / / / /4 7 1/4 10 3/4 14 1/ /4 7 1/2 11 1/ /4 11 3/4 15 1/ /4 8 1/2 12 1/2 16 3/ /2 8 3/ / / /4 17 3/4 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) Suggested Yardage for 308 Relaxed with Tails Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 206 SHADE HEIGHT YARDS 20" 2 YD 3 3/4 5 1/2 7 1/ /4 7 3/ /4 4 1/4 6 1/4 8 1/ /4 4 1/2 6 3/ /2 4 3/ / /2 4 3/4 7 1/ /4 5 1/ / /4 5 1/2 8 1/ /4 11 3/ /4 6 1/4 9 1/4 12 1/ /4 6 1/2 9 1/2 12 3/ /2 6 3/ / / / /4 7 1/4 10 3/4 14 1/ /4 7 1/2 11 1/ /4 11 3/4 15 1/ /4 8 1/2 12 1/2 16 3/ /2 8 3/ / / /4 17 3/ /4 9 1/4 13 3/4 18 1/ /4 9 1/2 14 1/ /4 14 1/2 19 1/ /4 10 1/4 15 1/2 20 1/ /4 10 1/2 15 3/4 21 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) 38

47 309 Balloon (Single Pouf) Shade The 309 Shade is an unstructured, relaxed shade style. A simple pleat at the top center falls into a relaxed pouf on the bottom. For wider shades, there is a tuck at the top of each width of fabric. Inverted pleat Pleating size From 7 to 8 A Metal Rings Finish length is from A to B Open space B Open space 310 Balloon (Multi Pouf) Shade The 310 Shade is made with inverted pleats along the top which fall into full balloon poufs at the bottom. The structured elegance of the 310 Balloon makes it a good choice for a more formal setting. Metal Ring A Pleating size From 7 to 8 Open Space Open Space B Finish length is from A to B 39

48 Suggested Yardage for 309 Balloon (Single Pouf) Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO " FABRIC UP TO TO TO TO 186 SHADE HEIGHT YARDS 20" 1 3/4 YD 3 1/ / /4 5 1/2 7 1/ / /4 4 1/4 6 1/4 8 1/ /4 4 1/2 6 3/ /2 4 3/4 7 1/4 9 1/ / / /4 5 1/ / /4 5 3/4 8 1/2 11 1/ /4 11 3/ /4 6 1/4 9 1/4 12 1/ /4 6 1/2 9 3/4 12 3/ /2 6 3/ / / / /4 7 1/ / /4 7 1/2 11 1/ /4 11 3/4 15 3/ /4 12 1/4 16 3/ /4 8 1/2 12 1/2 16 3/ /2 8 3/ / / /2 17 3/ /4 9 1/4 13 3/4 18 1/ /4 9 1/2 14 1/ /4 14 3/4 19 1/ /4 10 1/4 15 1/2 20 1/2 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) Suggested Yardage for 310 Balloon (Multi - Pouf) Shade SHADE WIDTH FABRIC WIDTH 1 CUT 2 CUTS 3 CUTS 4 CUTS 48" FABRIC UP TO TO TO TO 96 54" FABRIC UP TO TO TO TO 108 SHADE HEIGHT YARDS 20" 1 3/4 YD 3 1/ / /4 5 1/2 7 1/ / /4 4 1/4 6 1/4 8 1/ /4 4 1/2 6 3/ /2 4 3/4 7 1/4 9 1/ / / /4 5 1/ / /4 5 3/4 8 1/2 11 1/ /4 11 3/ /4 6 1/4 9 1/4 12 1/ /4 6 1/2 9 3/4 12 3/ /2 6 3/ / / / /4 7 1/ / /4 7 1/2 11 1/ /4 11 3/4 15 3/ /4 12 1/4 16 3/ /4 8 1/2 12 1/2 16 3/ /2 8 3/ / / /2 17 3/ /4 9 1/4 13 3/4 18 1/ /4 9 1/2 14 1/ /4 14 3/4 19 1/ /4 10 1/4 15 1/2 20 1/2 ADD REPEATS 1 REPEAT 1 REPEAT 2 REPEATS 3 REPEATS (YARDAGE CHART BASED ON PLAIN FABRIC - SEE OFFICE FOR PRINTED FABRIC) 40

49 Tools Pencil Awl Tape measure Level Motor tester (if shade is motorized) Sharp blade and masking tape (if shade is cords forward, outside mount) Power drill with the following bits: 1/16 drill bit 1/4 hex driver Standard screwdriver Phillips screwdriver Hardware 3 wood screws (for shades inside/ceiling mount, motorized or chain-operated) 2 wood screws (for shades inside/ceiling mount, cord-operated) L-brackets (for outside/wall mount) 1 ½ wood screws (for mounting brackets to wall) ¾ wood screws (for mounting shade to brackets) Cord Cleat with ½ screws (for cord-operated shades) 1 ½ Phillips screw (for chain holder attachment, chain-operated shades) Bracket Installation Brackets need to be securely attach to the mounting surface 41

50 Inside Roman Shades 1. The top headboard has predrilled mounting holes for easy installation. Turn the shade so that the front of the Roman Shade is facing into the room and the predrilled headboard holes are easily accessible. Center the shade inside the window frame using an pencil or awl, mark the locations of the mounting holes through the predrilled headboard holes. 2. Align the shade with the drilled holes and ensure that the draw cords are not snagged. Install the shade using the screws provided. Outside Roman Shades Roman Shades are attached to the wall with the L brackets provided. With a pencil, mark the mounting position of each L bracket at the desired height. A bracket must be installed about 3-4 from each side of shade. For wider shades, additional brackets are included to prevent bowing. Space them equally across the top and be sure that they are level with the two end brackets. 42

51 Cords Forward Roman Shades (L Bracket Installation Process) If the Roman Shade is cords forward and you are doing an outside mount, you will need to make small slits in the shade fabric to insert the mounting brackets. Use a piece of masking tape, about 1½ long, on the face of the shade at each bracket location to prevent fraying. mark a line on the masking tape directly below the underside of the headboard. Using a blade, carefully cut fabric through the masking tape and the shade fabric at each marked location. Important: The slits must be placed exactly at the bottom edge of the headboard. If they are too high or too low, the shade fabric can bunch up or the cloth can rip. Attach the shade to the L brackets, using the small screws provided. For final process on installation attach line cord cleat or chain holder on each shade hanging cord or chain is a safety hazard for children or pets. To prevent possible strangulation, be sure these finishing steps are completed and always wrap excess cord around a cord cleat. Upend Headboard Roman Shades If the shade uses an upended headboard, 2 flat head Phillips screws are provided. The shade is attached through the predrilled holes in the headboard whether the shade is inside or outside mount. Hold the shade fabric out of the way and attach the headboard as shown. Ensure the screws or moving drill parts do not catch the shade fabric or cords. 43

52 Ray Ev, Inc. Date: CUSTOM ROMAN SHADE ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # Ordered by: Ray Ev will not be responsible for customer s own fabric due to defects & various contents that can affect the stability and hanging of fabric. Ray Ev will not be responsible for customer s own fabric sent by mills with flaws and defects. Ray Ev is only responsible for fabrication of the shades. Production begins on the day your fabric is received by the factory. Changes or Cancellations cannot be accepted once production begins. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject. Sold To: Ship To: Lifting System Room Qty Style Finish Finish Mount Window Location Width Height IS OS L R L R L R Cords Forward Banding Color Pattern White White Off White Lining type Cord Pulley Cord Lock Clutch Fabric Regular Blackout Thermal Interlining Off White White Off White white Off White 44 Special Instructions:

53 Ray Ev, Inc. Date: CUSTOM MOTORIZED ROMAN SHADE 6400 Variel Avenue Sidemark: ORDER FORM Woodland Hills, CA P.O. # FAX: Ordered by: Sold To: Ship To: Room Qty Style Finish Finish Window Location Width Height IS OS Battery Plug-in Cords Banding Mount Motorized Lining type Motor Regular Blackout Thermal Interlining Channel Forward Fabric Color Pattern White Off White White Off White White Off White white Off White 45 Special Instructions: Qty 1 Channel 1-4 Channel 1 Channel Wall Switch 1-4 Channel Wall Switch 1-16 Channel Remote Ray Ev will not be responsible for customer s own fabric due to defects & various contents that can affect the stability and hanging of fabric. Ray Ev will not be responsible for customer s own fabric sent by mills with flaws and defects. Ray Ev is only responsible for fabrication of the shades. Production begins on the day your fabric is received by the factory. Changes or Cancellations cannot be accepted once production begins. See Price Guide Book for fabrication specifications and general terms & conditions, to which all orders are subject.

54 CUSTOM ROLLER SHADE GENERAL INFORMATION 1. Prices listed are suggested retail. All prices and terms are subject to change without notice. 2. Orders accepted by us are custom made and cannot be changed, cancelled, or returned. We are not responsible for customer s measurements. Orders and/or Quotes must be written, faxed or ed. Phone orders are not accepted. 3. We will not be responsible for installation or reinstallation charges including trip charges. Check each package for correct size, pattern, color and brackets before giving to your installer. 4. Listed Prices Include: a. Rollers of appropriate diameter in relation to customer s measurement. b. Lift system is a Clutch system with continuous beaded chain. (Metal chain available upon request). NOTE: Length of controls determined by the length of the shade. c. Coordinating bottomrail. Colors available: Black, White, Bronze, Ivory & Gray. 5. Roller Shade may be ordered with a Cassette or a Fascia for an additional charge. See price charts. Cassettes are available in 3 ½ or 4 with matching fabric insert & Fascia available in 3 or When ordering your shade as in Inside Mount, the factory will deduct 1/8 in width for clearance. 7. Minimum Roller Shade width 15 (not recommended). Maximum Roller Shade width determined by fabric width. 8. Minimum Cordless Roller Shade with Cassette width 25. SURCHARGES (NET PRICE) Roller Shade Repair $30.00 per Shade (Minimum charge plus any parts - Ray Ev s Shades only) Roller Shade Cutout $30.00 per Shade Spring Assist $85.00 plus cost of Roller Shade (Recommended for oversized shades -Call Customer Service for limitations) Link System $50.00 Link System allows you to operate two shades with one clutch with 1 gap between shades. (Spring assist is recommended for a better function). No cassette or fascia can be used, only a self-valance. Duo Shade Bracket $20.00 Vertical or horizontal available for clutch system only. For Roller Shade larger than listed on Price Sheet or Roller Shade over 100, call Customer Service for a quote & surcharges. 46

55 Roller Shade Valance Options: Round Cassette System Available in 3-1/2" or 4" / made of aluminum. Includes matching roller shade fabric on face of cassette. Roll: Color: Mount: Min. Width: Max. Width: Available for Regular roll only White, Ivory, Black, Bronze & Anodized Inside & Outside 18" recommended 190" for multiple shades Limitation 3-1/2" Cassette: 18" - 84 " Width Maximum length 96" for Screen Fabric Maximum length 72" for Blackout Fabric 4" Cassette: 84" - 102" Width Maximum length 96" for Screen & Blackout Fabric Fascia System Available in 3" or 4" / square aluminum fascia valance is an "L" shaped aluminum extrusion. This valance style covers the front and bottom of the roller. This valance style uses brackets with snap-in fittings. Roller: Color: Mount: Min. width: Max. width: Limitation Available for regular roll only White, Ivory, Black, Bronze & Anodized Inside & Outside 18" recommended 190" for multiple shades 3" Fascia: 18" - 84 " Width Maximum length 96" for Screen Fabric Maximum length 72" for Blackout Fabric 4" Fascia: 84" - 144" Width Maximum length 120" for Screen & Blackout Fabric Self Valance This valance style is made with the same fabric as the roller shade. The roller shade is mounted by Ray Ev into the valance for easy installation. Roller: Mount: Min. width: Max. width: Price: Available for regular roll only Inside & Outside 18" recommended 190" for multiple shades $10.00 lineal foot 47

56 Standard Parts: Bottomrail Helpful tips for Custom Shade measurements: What is the tip to tip? The tip to tip measurement is from the outside of one bracket to the outside of the opposite bracket. For inside mount, it is the tight opening (the width of the window opening) minus a small allowance of ¼ for clearance. What does tight opening mean? The tight opening is simply the width of the window opening. If a shade is made the same width as the window opening, the shade will not fit in the opening. Because of this, we deduct ¼ from the tight opening for shades up to 120. This clearance ensures that the shade fits within the window opening and can be moved up and down without interference. What is the cloth width? The cloth width is the width of the area you want the actual cloth of the roller shade to cover. For an inside mount roller shade, it is important to remember that the cloth width must always be less than the width of the window opening. You must allow enough room on either side of the cloth to accommodate the shade hardware, such as brackets or cassette. The hardware always extends past the cloth. When do I need to indicate a measurement on the cloth width? If your shade is outside mount, and you want the shade cloth to be an exact width, indicate this measurement in the Cloth Width box. We will add the allowances for brackets to arrive at the Tip to Tip Width, approximately 1-1/4 (cloth width 75, tip to tip width 76 ¼ ). If cassette is indicated in the Valance Type box, we will add the appropriate allowance to arrive at the Overall Width, approximately 1 (ordered size 75, overall width 76 ). Cloth Width 48

57 Installation Instructions: Tools Required: Power drill with the following bits: Metal measuring tape - ¼ hex driver with extended shaft (8-12 ) Level - Phillips screwdriver Awl or pencil - 1/16 drill bit Ladder or stepstool - Masonry drill bit (if mounting surface requires) - Needle nose pliers Components: Shade 1-1/2 self-tapping hex head mounting screws Phillips screw for chain holder Components and Hardware: Important: When the shade is removed from its packaging, leave the shade rolled up. Do not unrolled until the shade is installed on the brackets. 1. Usually the control mechanism is placed on the right side, but it also can be used for the left side. The A bracket is always placed on the side with the bead chain and the B bracket on the opposite side. 49

58 2. The brackets can be placed in three different ways: Mounting Inside frame(2b) Ceiling Mount(2c) Mounting Outside frame(2a) 3. Before the roller shade is placed in the brackets, insert the Bracket Insert in the end of the roller shade with the round hole. 4. Then press the control mechanism into pin metal of the A bracket. 5. Press the square part of the locking bracket into B bracket until the locking button is notched into the front of the B bracket. With safety in mind we have provided you with Cord Guides to keep the cords out of reach of small children. Mount the Cord Guide to the side of the window frame for inside mount, or the frame or wall for outside mount. Do not apply tension to loop control. The cord should run through the cord guide freely. 50

59 Installation Instructions with Cassette: Tools Required: Power drill with the following bits: Metal measuring tape - ¼ hex driver with extended shaft (8-12 ) Level Awl or pencil Ladder or stepstool Components: - Phillips screwdriver - 1/16 drill bit - Masonry drill bit (if mounting surface requires) - Needle nose pliers Shade Cassette 1-1/2 self-tapping hex head mounting screws Cassette brackets (for outside mount) Phillips screw for chain holder Components and Hardware: Important: When the shade is removed from its packaging, leave the shade rolled up. Do not unrolled until the shade is installed on the brackets. 51

60 Inside Mount Attach the Cassette Hold the cassette in the opening at the desired location, making sure it is centered and level. If the window opening is not level, use shims to level the cassette Important: For the shade to operate properly and roll up evenly, it must be level. Attach the cassette by drilling the self-tapping hex head screws through the top of the cassette and into the window frame. Place a screw within about 6 of each end, and space any additional screws about 30 based on overall width. Outside Mount Hold the cassette on the wall and mark the location, making sure it is centered and level. Measure and mark the locations for the cassette brackets (1/16 below the desired level of the top of the cassette). Place a bracket within about 6 of each end, and space any additional brackets about 30 based on overall width. Ensure the brackets are level with each other. Align brackets with studs where possible. If solid backing is not available, use special fasteners designed for the mounting surface (not included). Attach the L Brackets Attach the L brackets using the hex head screws provided. If there is any curvature in the wall surface, avoid warping the cassette by using shims behind brackets where needed to compensate. Loosen the lock screws on the brackets and move the slide cleats away from the wall. Tilt the cassette onto the brackets, catching the front mounting rail on the front of the brackets as shown. Tilt the cassette back so it is flat on the top of the brackets. Move the slide cleats back so that they catch the rear mounting rail of the cassette, and tighten the lock screws. 52

61 Regular Rolling Inside Outside Reverse Rolling Inside Outside 53

62 MOTORIZED ROLLER SHADES GENERAL INFORMATION & SURCHARGES Frequently Asked Questions: What do you mean by "pre-programmed"? All motorized are "plug and play". That means after you install the shade, just press the remote and the shade works. Even multi-shade orders will be pre-programmed and ready to use. Do I need electrician? No. Simply plug the battery pack into the shade. For Plug-in (110 Volt), plug the unit into a standard wall outlet or it can be hard wired into the wall by an electrician. Dealer Net Price Somfy Products Battery Hardwired / Plug-in (110 Volt) Shade Size (Max size 60" X 65") 30" to 75"wide 76" to 130" 130" & 150" Roller Shade $ 250 ***see limitations $365 $410 $460 NOTE: This price does not include remote control transmitter. (5 year manufacturer warranty) Remote Control Dealer Net Price: 1 Channel Transmitter $ Channel Transmitter $ Channel Transmitter $ Channel (Wireless) Wall Switch $ Channel (Wireless) Wall Switch $ (Different colors of Transmitter available upon request at additional charge.) 1 - Timer $ Solar Panel available for Battery Operated Motors only $ Additional Battery Wand (Lithium Batteries included) $55.00 Coupler for 2 on 1 Motorized Shade $75.00 ***Battery motor lifting capacity is up to 8 pounds per shade & call Customer Service Dept. for limitations. Cord Size for plug-in motor is 6 ft. at no charge. Longer cord sizes available upon request for an additional charge, please call Customer Service Department. February 1,

63 55 24" L/W 4" Cassette or 4" Fascia 3" Fascia 3.5" Cassette 78 Cordless 30" " " " " " " " " " " " " February 1, " L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 108" 116" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. Warranty will be void due to curling edges. Some fabrics may not be applicable for railroading due to texture. Solar Screen %, 3%, 5% & 10% Suggested Retail Price CUSTOM ROLLER SHADES

64 56 30" " " Fascia 3.5" Cassette 4" Cassette or 4" Fascia L/W Cordless 36" " " L/W 24" 30" 36" 42" 48" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. railroading due to texture. 60" " " " " " " " " " " " " " February 1, " Warranty will be void due to curling edges. Some fabrics may not be applicable for 54" Vision 351 Comfort Plus FR - 1% Vision 403 FR - 3% 365 Colorama FR (B) - 5% Suggested Retail Price CUSTOM ROLLER SHADES

65 57 30" " " Fascia 3.5" Cassette 4" Cassette or 4" Fascia L/W Cordless 36" " " L/W 24" 30" 36" 42" 48" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. railroading due to texture. 60" " " " " " " " " " " " " " February 1, " Warranty will be void due to curling edges. Some fabrics may not be applicable for 54" Vision 550 FR (A) & (B) - 5% Solar Screen Decorative Stucco - 8% Claire Suggested Retail Price CUSTOM ROLLER SHADES

66 58 24" L/W 4" Cassette or 4" Fascia 3" Fascia 3.5" Cassette 78 Cordless 30" " " " " " " " " " " " " February 1, " L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 108" 116" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. Warranty will be void due to curling edges. Some fabrics may not be applicable for railroading due to texture. Premium Blackout Lanair Blackout Florence Blackout Suggested Retail Price CUSTOM ROLLER SHADES

67 59 24" L/W 4" Cassette or 4" Fascia 3" Fascia 3.5" Cassette 78 Cordless 30" " " " " " " " " " " " " February 1, " L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 108" 116" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. Warranty will be void due to curling edges. Some fabrics may not be applicable for railroading due to texture. Palm Beach Blackout 3 PES Blackout South Beach Blackout (I) Stucco Blackout Suggested Retail Price CUSTOM ROLLER SHADES

68 60 24" L/W 4" Cassette or 4" Fascia 3" Fascia 3.5" Cassette 78 Cordless 30" " " " " " " " " " " " " February 1, " L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 96" 108" 116" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. Warranty will be void due to curling edges. Some fabrics may not be applicable for railroading due to texture. Palm Beach Light-Filtering Nature Rome Amalfi Mistral Ibiza Suggested Retail Price CUSTOM ROLLER SHADES

69 61 24" L/W 4" Cassette or 4" Fascia 3" Fascia 3.5" Cassette 78 Cordless 30" " " " L/W 24" 30" 36" 42" 48" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. railroading due to texture. South Beach (I) 60" " " " " " " " " " " " " " February 1, " Warranty will be void due to curling edges. Some fabrics may not be applicable for 54" Suggested Retail Price CUSTOM ROLLER SHADES

70 62 30" " " Fascia 3.5" Cassette 4" Cassette or 4" Fascia L/W Cordless 36" " " " " " " " " " " February 1, " L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 36" " " " " " " " " " " " " " " " " " " " *SHADED AREA NOT RECOMMENDED. When ordering shades outside chart limits, the fabric will be railroaded. Warranty will be void due to curling edges. Some fabrics may not be applicable for railroading due to texture. Kiana, Macau, Kanela & Malacca Suggested Retail Price NATURAL COLLECTION ROLLER SHADES

71 Cordless February 1, 2018 Kiana, Macau, Kanela & Malacca (Roman Shade Style 301 & 305 Only) NATURAL COLLECTION ROMAN SHADES Suggested Retail Price 63 L/W 12" 24" 36" 48" 60" 72" 84" 96" 24" " " ,064 60" ,164 1,330 72" ,198 1,397 1,596 84" ,164 1,397 1,630 1,862 96" ,064 1,330 1,596 1,862 2, " ,198 1,497 1,795 2,095 2, " ,330 1,663 1,996 2,327 2, " ,098 1,464 1,829 2,195 2,560 2, " ,098 1,596 1,996 2,394 2,819 3, " ,297 1,730 2,162 2,593 3,079 3, " ,397 1,862 2,327 2,794 3,312 3, " ,497 1,996 2,494 2,993 3,545 3,990 *SHADED AREA NOT RECOMMENDED.

72 Ray Ev offers a new ZEBRA shade. This new roller shade combines light control of a horizontal blind with the softness of a fabric shade. Simply adjust the shade panel in one position to achieve a soft translucence of a sheer or adjust further to create privacy. It is a similar look to the brand silhouette however it does not have a vane in the middle. Please call to request a sample to view the fabric. For further information or questions please call Customer Service Department at

73 CUSTOM ZEBRA SHADE GENERAL INFORMATION 1. Prices listed are suggested retail. All prices and terms are subject to change without notice. 2. Orders accepted by us are custom made and cannot be changed, cancelled or returned. We are not responsible for customer s measurements. Orders and/or Quotes must be written, faxed or ed. Phone orders are not accepted. 3. We will not be responsible for installation or reinstallation charges including trip charges. Check each package for correct size, pattern, color and brackets before giving to your installer. 4. Listed Prices Include: a) Rollers of appropriate diameter in relation to customer s measurement. b) Lift system is a Clutch system with continuous metal chain. NOTE: Length of controls determined by the length of the shade. EXAMPLE: If the finish length of the blind is 50, the chain length will be approximately 37. c) Coordinating bottom rail colors are available in Black, White, Bronze, and Ivory & Gray. 5. Zebra Shade must have 4 Cassette and price includes the cassette. 6. When ordering your shade as in Inside Mount, the factory will deduct ¼ in width for clearance. 7. Minimum Zebra Shade width is 18. Maximum Zebra Shade width is determined by fabric width. 8. Minimum charge for a shade repair is $35.00 per shade (net price) plus cost of parts required. 9. For Zebra Shade larger than listed on Price Sheet or Zebra Shade over 100, please call Customer Service Department for a quote & surcharges. It may require Center Support Bracket available as 2- on-1 with 5/8 gap with one continuous valance (see picture below). Center Support Bracket surcharge is $35.00 (net price). Clutch Roller Shade with Center Support Bracket: This specially designed bracket joins two separate roller shades together. It allows operation of two independently operated shades with two controls chains. The right chain operates the right shade, while the left chain operates the left shade. This center support bracket uses two recessed spring loaded end caps to reduce a light gap between the two separate roller shades. Gap: 5/8 65

74 Zebra Shade Valance : Round Cassette System Available in 4 only in aluminum. Includes matching roller shade fabric on face of cassette. Roll: Color: Mount: Minimum Width: Maximum Width: Available for regular roll only White, Ivory, Black, Bronze & Anodized Inside & Outside 18" recommended 190 for multiple shades White Ivory Black Bronze Gray 66

75 February 1, 2018 CUSTOM ZEBRA SHADES Suggested Retail Price Zebra Aria, Peninsula & Westin Aria (Ivory, Beige, Brown & Charcoal) Peninsula (White, Mushroom, Chocolate & Charcoal) Westin (White, Mushroom, Brown & Chocolate) 67 (Fabric width up to 99") L/W 24" 30" 36" 42" 48" 54" 60" 66" 72" 78" 84" 90" 99" 36" " " " " " " " " " " " " " " " " " " " SHADED AREA NOT RECOMMENDED. PLEASE CALL CUSTOMER SERVICE DEPARTMENT FOR OVERSIZE SHADES.

76 Ray Ev, Inc. Date: CUSTOM ROLLER SHADE ORDER FORM 6400 Variel Avenue Sidemark: FAX: Woodland Hills, CA P.O. # Ordered by: Sold To: Ship To: Room Qty Tip to Tip Cloth Width Finish Mount Clutch Cassette Fascia Roll Fabric Description Window Location Length IS OS L R Reg Rev 68 Difference between cloth size and tip to tip will be from 1/2" to 3/4" on each side Special Instructions:

77 Ray Ev, Inc. Date: CUSTOM MOTORIZED ROLLER SHADE 6400 Variel Avenue Sidemark: ORDER FORM Woodland Hills, CA P.O. # FAX: Ordered by: 1 Channel 1-4 Channel 1 Channel Wall Switch 1-4 Channel Wall Switch 1-16 Channel Remote Sold To: Ship To: Room / Qty Tip to Tip Cloth Width Finish Mount Motor Cassette Fascia Roll Fabric Description Channel Window Location Length IS OS Battery Plug-in Reg Rev 69 Difference between cloth size and tip to tip will be from 1/2" to 3/4" on each side Special Instructions: Qty

78 Custom Cellular Shades Ray Ev, cellular shade collection is one of the industry s most fashionable and comprehensive programs. Our shades, light filtering to blackout, single cells to double cells come in a rainbow of fashion colors from soft neutrals to rich jewel tones. Specialty fabrics such as sheer, slub woven, linen prints and crush fabrics add more choices and creativities to home decoration. Fire retardant fabrics provide more options to commercial applications. 9/16 Single cell light filtering PLS Cotton PLS Snow White PLS Onion PLS Alabaster PLS Cream PLS Fawn PLS Biscuit PLS Pongee PLS Ocher PLS Tan PLS Terra Cotta PLS Cocoa PLS Spring Green PLS Water Green PLS Avocado PLS Roseate PLS Stone Red PLS Agate Red PLS Bordeaux PLS Gray Sheen PLS Marine Blue PLS Royal Gray PLS Jean Blue PLS Black PLS Wisteria PLS Anthracite PLS White Dove PLS Winter White PLS Teal PLS Buff Yellow PLS Antique Pewter PLS Slate PLS Dark Chocolate 3/4 Single cell smooth light filtering PLS43C-001 Cotton PLS43C-002 Snow White PLS43C-005 Cream PLS43C-070 Winter White 7/16 double cell light filtering PLX3A0-001 Cotton PLX3A0-069 White Dove PLX3A0-070 Winter White PLX3A0-002 Snow White PLX3A0-003 Onion PLX3A0-004 Alabaster PLX3A0-005 Cream PLX3A0-006 Fawn PLX3A0-007 Biscuit PLX3A0-008 Pongee PLX3A0-009 Ocher PLX3A0-010 Tan PLX3A0-011 Terra Cotta PLX3A0-012 Cocoa PLX3A0-013 Spring Green PLX3A0-014 Water Green PLX3A0-015 Avocado PLX3A0-016 Roseate PLX3A0-018 Stone Red PLX3A0-019 Agate Red PLX3A0-020 Bordeaux PLX3A0-021 Gray Sheen PLX3A0-022 Marine Blue PLX3A0-023 Royal Gray PLX3A0-024 Jean Blue PLX3A0-025 Black PLX3A0-026 Wisteria PLX3A0-326 Dark Chocolate 9/16 Single cell linen print PLS Linen Sand PLS Linen Fawn PLS Linen Gray PLS Linen Cocoa 3/4 Single cell smooth blackout PLS44C-002 Snow White PLS44C-005 Cream PLS44C-021 Gray Sheen PLS44C-070 Winter White Fabric that is also available in fire retardant. 70 9/16 Single cell blackout PLS Cotton PLS Snow White PLS Onion PLS Alabaster PLS Fawn PLS Pongee PLS Ocher PLS Cocoa PLS Avocado PLS Bordeaux PLS Gray Sheen PLS Jean Blue PLS Black PLS White Dove PLS Winter White PLS Dark Chocolate PLS Antique Pewter PLS Slate 9/16 Single cell sheer PLS Cotton PLS Snow White PLS Alabaster PLS Fawn PLS Cocoa 9/16 Single cell crush PLS CR Cotton PLS CR White Dove PLS CR Winter White PLS CR Fawn PLS CR Cocoa 9/16 Single cell slub woven PLS37A-001 Cotton PLS37A-004 Alabaster PLS37A-012 Cocoa PLS37A326 Dark Chocolate PLS37A025 Black

79 CELLULAR SHADE COLOR AND NUMBER SELECTION FABRIC COLOR NO. Single Cell Light Filtering Blackout Single Cell Linen Print Single Cell Smooth Blackout Light Filtering Sheer Crush Slub Woven 001 Cotton N/A N/A 002 Snow White N/A N/A N/A 003 Onion N/A N/A N/A N/A N/A N/A 004 Alabaster N/A N/A N/A N/A 005 Cream N/A N/A N/A N/A N/A 006 Fawn N/A N/A N/A 007 Biscuit N/A N/A N/A N/A N/A N/A N/A 009 Ocher N/A N/A N/A N/A N/A N/A 011 Terra Cotta N/A N/A N/A N/A N/A N/A N/A 012 Cocoa N/A N/A 013 FABRIC COLOR NAME Spring Green 9/16" 9/16" 9/16" 3/4" 3/4" 7/16" Single Cell Single Cell Smooth Light Filtering 008 Pongee N/A N/A N/A 010 Tan N/A N/A N/A N/A Double Cell 9/16" 9/16" 9/16" Single Cell Single Cell N/A N/A N/A N/A N/A N/A N/A 014 Water Green N/A N/A N/A N/A N/A N/A N/A 015 Avocado N/A N/A N/A N/A N/A N/A 016 Roseate N/A N/A N/A N/A N/A N/A N/A 018 Stone Red N/A N/A N/A N/A N/A N/A N/A 020 Bordeaux N/A N/A N/A N/A N/A N/A 021 Gray Sheen N/A N/A N/A N/A N/A Single Cell N/A N/A N/A N/A N/A N/A 019 Agate Red N/A N/A N/A N/A N/A N/A N/A 022 Marine Blue N/A N/A N/A N/A N/A N/A N/A 023 Royal Gray N/A N/A N/A N/A N/A N/A N/A 024 Jean Blue N/A N/A N/A N/A 025 Black N/A N/A N/A N/A N/A 026 Wisteria N/A N/A N/A N/A N/A N/A N/A 030 Anthracite N/A N/A N/A N/A N/A N/A N/A N/A 032 Sand N/A N/A N/A N/A N/A N/A N/A N/A 034 Gray N/A N/A N/A N/A N/A N/A N/A N/A 069 White Dove N/A N/A N/A N/A N/A 070 Winter White N/A N/A N/A 094 Teal N/A N/A N/A N/A N/A N/A N/A N/A 100 Buff Yellow N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Dark Chocolate Antique Pewter N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 71

80 CELLULAR SHADE LIMITATIONS SIZE STANDARDS: Cordless Cordless TDBU Clutch Minimum Width 18" 19" 18" Minimum Height 10" 10" 10" Maximum Width 84" 84" 132" Maximum Height 82" 72" 120" Standard Features: 3/8" deductions will be taken for inside mount Aluminum headrail and bottom rail Standard shades include clutch system Notes: Top Down Bottom Up not available with clutch system 3 on 1 headrail not available with clutch system Day/Night Shade Features: Made with our standard aluminum headrail and bottom rail Top rail will match top fabric; middle and bottom rail will match bottom fabric (refer to surcharge options below) Standard controls: right cord operated the bottom rail; left operates middle rail. Reverse controls are also available Surcharge Options (net charge): Day/Night Shade-two color with top & bottom: Charge as a combination of two shades Tile cut out (no warranty for cut out): $ on-1 & 3-on-1 headrail: Shades are priced individually Repair charges for Cellular Shades NET(Ray Ev shades only) Shorten Height $20.00 Cut Down width $20.00 Restring $20.00 Change control position $20.00 Replace headrail or bottomrail $20.00 NOTE: All repair charges do not included freight. Standard shipping charges will be applied. 72

81 How to Measure Cellular Shades Measure each window individually as sizes may vary. Measure width first, then height (length) to the nearest 1/8. Measure width from left to right, height from top to bottom using a metal tape measure. PLEASE DO NOT USE A CLOTH TAPE! Inside Mount: Inside mount shades are installed inside the window frame. 1. Measure the exact inside width of the window frame from one inside edge to the other. Take three measurements: one near the top, one in the center and one near the bottom. Record the narrowest measurement. 2. Measure the exact height in three places: left, center and right from top edge of opening to top of sill. Record the longest measurement for horizontal blinds. 3. Do not take deductions on inside mount measurements. The factory will take a 3/8 allowances for operating clearance. 4. Measure the window diagonally in two places as shown. If the two diagonal measurements are not the same, we suggest an outside mount application for the best shade performance and appearance. Outside Mount: Outside mount shades are installed outside the window frame, covering an area larger than the window itself. 1. Measure the exact width of area to be covered. Be certain the measurement overlaps the window opening by at least 1 1/2 on each side to ensure privacy and light control. 2. Measure exact height to be covered, including desired overlap (usually from top edge of molding to bottom edge, or to top of sill). If there is no sill, measure to where the blind is to reach. 3. The factory does not make deductions for an outside mount. Inside Mount (IB) Outside Mount (O) 73

82 9/16" Single Cell Light Filtering Fabric WIDTH up to: Custom Cellular Shades Suggested Retail Price 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. RETAIL Surcharge: Cordless- $ Surcharge: Top Down Bottom Up Cordless - $ /16" Double Cell Light Filtering Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. February 1,

83 9/16" Single Cell Blackout Fabric WIDTH up to: Custom Cellular Shades Suggested Retail Price 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. RETAIL Surcharge: Cordless- $ Surcharge: Top Down Bottom Up Cordless - $ /16" Single Cell Light Filtering Premium Sheer Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. February 1,

84 Custom Cellular Shades Suggested Retail Price 9/16" Single Cell Light Filtering Premium Crush/Slub Woven Fabrics WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. RETAIL Surcharge: Cordless- $ Surcharge: Top Down Bottom Up Cordless - $ /16" Single Cell Light Filtering Linen Print Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. February 1,

85 9/16" Single Cell Light Filtering Fire Retardant Fabric WIDTH up to: Custom Fire Retardant Cellular Shades Suggested Retail Price 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. RETAIL Surcharge: Cordless- $ Surcharge: Top Down Bottom Up Cordless - $ /16" Single Cell Blackout Fire Retardant Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. February 1,

86 Custom Smooth Cellular Shades Suggested Retail Price 3/4" Single Cell Light Filtering Smooth Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. RETAIL Surcharge: Cordless- $ Surcharge: Top Down Bottom Up Cordless - $ /4" Single Cell Blackout Smooth Fabric WIDTH up to: 18"-24" 30" 36" 42" 48" 54" 60" 66" 72" 84" 96" 108" 120" 132" 144" LENGTH 5"-36" up to: 42" " " " " " " " " " " " " " Note: 2-on-1 and 3-on-1 headrail option is strongly recommended for all blinds measuring 96" or more in width or height. Single blind ordered larger than 96" in width or height will not be covered under the Ray Ev Warranty. February 1,

87 Custom Cellular Shades - Motorized Lift System Ray Ev s motorized cellular shades uses our heavy duty clutch shade headrail and is motorized with the Radio Technology Somfy (RTS) system. It is operated by a battery powered motor. The motor can support a shade up to 13lbs. Battery life expectancy is 1 to 3 years (depending on frequency of operation and material weight). Remote control is supported by radio frequency control. It can be controlled as an individual unit, as a sub group or as an entire group; depending on your choice of remote control. Net surcharge (Net surcharge is added onto clutch shade price): Motorization Radio frequency transmitter: 1 channel Radio frequency transmitter: 5 channel $ $55.00 $75.00 Replacement hardwares (Net surcharge for additional hardware): Reloadable battery tube 8 AA batteries $30.00 $ " battery extension cable 96" battery extension cable Wall mount clip $10.00 $10.00 $5 / set Dimension Limitation: Minimum width: 24" Minimum height: 12" Maximum weight: 13lbs Maximum width: 94" Maximum height: 96" Standard features: 1-1/2" color coordinated headrail Hand held remote control only (no hard wire) Radio frequency control Wall mount clips are included. Reloadable battery tube and 8 AA Lithium batteries are included Hand Held Remote Control (2 options): Option 1: 1 Channel RTS Remote will operate all of the shades simultaneously. All shades must be the same drop. Option 2: 5 Channel RTS Remote will operate up to five individual shads or five groups of shades. Color Matching: To ensure color matching, all cellular shades must be ordered at the same time. This will eliminate possible variations due to the nature of fabric. Product availability is subject to change without notice. 79

88 Specialty Cellular Shades Perfect Arches (Do not require a template) Perfect Arches are those where the radius of the circle is consistent at all points. Non-perfect Arches (Require Templates) Non-perfect Arches are not consistent at all points. Deviation of even 1/16 makes it imperfect. ARCHES Width MINIMUM = 18" MAXIMUM = 84" Height MINIMUM = 9" MAXIMUM = 48" Non-movable arches Non-perfect arches require templates QUARTER ARCHES Width MINIMUM = 9" MAXIMUM = 50" Non-movable quarter arches Non-perfect quarter arches require templates. CIRCLES Width MIN 9/16" = 9" MAX 9/16" = 42" Width MIN 7/16" = 12" MAX 7/16" = 42" Non-movable circles Non-perfect circles require templates. OCTAGONS Width MINIMUM = 12" MAXIMUM = 48" Height MINIMUM = 12" MAXIMUM = 48" Measurement of all 8 sides are needed. Templates are required. TRAPEZOIDS Width MINIMUM = 12" MAXIMUM = 60" Height MINIMUM = 12" MAXIMUM = 72" Longer side drop can not exceed 130% of shorter side drop. Measurement of all 4 sides are needed. 80