Casegoods: Prato April 1, April 1, PRICING & SPECIFICATION GUIDE Prato Collection AP1

Transcription

1 PRICING & SPECIFICATION GUIDE Prato Collection April 1, 2017 AP1

2 Design: David Ritch & Mark Saffell, 5D Studio AP2

3 Casegoods: Prato Planning Guide Tables Table-Desks Runoffs Bridges Tops Top Connecting Hardware Top Support Keels Top Support Column Legs Top Divider Panels Mobile Storage Bench Storage 18d Bench Storage 24d Bench-Credenza Back Panels Credenza Storage 15d Credenza Storage 18d Credenza Storage 24d Credenza CB Dividers & Trays Desk Storage Wall Hutches Task Lighting Wall Panels Wall Panel Accessories Wall Canopy Wall End Panel Towers Adjustable Height AP4 AP8 AP9 AP10 AP12 AP14 AP15 AP15 AP15 AP16 AP18 AP18 AP20 AP22 AP23 AP24 AP26 AP27 AP28 AP32 AP35 AP36 AP38 AP38 AP38 AP39 AP46 AP3

4 Casegoods: Prato April 1, 2017 PLANNING GUIDE The dimensional cadences of Prato allow for extensive modular interchangeability of components while preserving the built-in look of millwork case construction The diagram at right illustrates the alignment of many of the common furniture components as they might occur in relation to each other. Wall panels establish a uniform and rhythmic vertical cadence, and are available in any width (using parametrics), in 6-in increments standard. Note how desk height (D) tops sit above credenza (C) tops, and how drawer/door faces overlap the credenza tops. Bench (B) modules break cadence with the wall panels but are reconciled by (CB) and (C:CB) units. Similarly, single (1.1) height overheads extend below the panel cadenza but are reconciled with 0.9 height panels. B CB C:CB C D Use a 0.9h panel under a 1.1h wall-hung cabinet AP4

5 Casegoods: Prato April 1, 2017 PLANNING GUIDE 4.5-in std setback of runoff from rear edge of credenza top allows for surface grommet at rear. No setback needed when runoff uses a Demi-Leg to rest on a bench surface. 1.25th Divider Panel (flush to rear of credenza) Use a Docking unit to form a T-intersection. E.g., for a 15d docking runoff to join with an 18d credenza, use C:C Dock LTX 14.25x17.25 o.a. depth of in-line credenza (18) 4.5 maximum span unsupported is 54 inches equal (If joining to a bench unit, use a Demi-Leg placed on-center, front-to-back, on the bench.) eq. eq. cl Column Legs are mounted off-center toward the user, for access to optional power-data outlets Door/Dwr Fronts Extension-for-Docking pieces must be used when joining any pedestal with a door or drawer to a Dock unit. This provides operating clearance with perpendicular surfaces, Allow 1.25-inches per Extension. An L-intersection will use two Extensions, a T-intersection will use three Extensions, and an X-intersection will use four. Shelving pedestals 24w or more that are perpendicular to a door or drawer do not require an Extension-for-Docking. A shelving pedestal perpendicular to another shelving pedestal requires no Extensions. To determine required Divider Panel size: total width of docking pedestals (15x4=60) + width of Extension-for-Docking (1.25) + depth of Dock-T unit (17.25) thickness of rear Divider Panel (1.25) o.a. width of docking Divider Panel (77.25) equal equal A finished back pedestal/credenza adds 0.75-in depth. AP5

6 Casegoods: Prato April 1, 2017 MODULAR STORAGE INFORMATION B CB C D Prato storage modules are available in a range of heights/functions: Mobile Storage Bench Modules [B], 18h, for storage and bench seating; faces flush to top. Credenza Modules, 28.4h, for storage and top runoff support: [C/B] units have an open area (XShelf) below the credenza surface. [C] units have faces that overlap the credenza top. Desk Modules [D], 29.9h, for full-height desk and runoff storage; faces are below the top surface. Tower Storage at 42.3, 56.2, 70.2 and 84.1h. All doors and drawers except sliding doors have push-to-open latches. Tops must be ordered separately for all Bench [B], Credenza [C] and [C/B], and Desk [D] modules. Runs of pedestals may be used sequentially without limit. Coordinate top selections as needed. Pedestals are listed and priced with unfinished exterior side panels; option codes allow for finished sides. Width for Back Panels and/or Wall Panels is the sum of all widths for the s you itemized. Add an Extension for Docking to each run of pedestals joining to a dock, whether inline or perpendicular. All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. Drawer walls are 0.5-in thick solid birch with English dovetail construction. Drawer bottoms are 0.3-in thick, dadoed into drawer walls. Drawer slides are ball bearing, full-extension. File drawers include a Pendaflex compatible file hanging system. Face Locks are included on all drawer and door pedestals, except as noted. Remove architectural base molding when placing Wall Panels, Towers and Pedestals. Open Gaps and KneePanels are ordered parametrically. Include width dimension in the and price calculation. Width parameters are shown in brackets; replace the bracketed w with the desired dimension. Example: Description w d $ List C KneePanel-Fixed [w] [15-54] K[w] 3.6[w]+315 C KneePanel-Fixed 36 1K AP6

7 Casegoods: Prato April 1, 2017 LTX CONFIGURATIONS --Docking pedestals may face either direction; use Finished Backs as needed. --Finished Back Panels are required on X-Layouts and the descending run of a Y-Layout (in orange), and optional elsewhere (in green). --Extensions (dark gray) are required on each connecting side of a Dock (light gray) when door/drawer pedestals are specified: Use a 1.25-in Extension when a door/drawer unit abuts a perpendicular door/drawer unit or Finished Back Panel. Use a 0.5-in Extension when a door/drawer unit or Back Panel abuts a perpendicular shelving unit (caution: travel of the door/drawer must be less than the width of the abutting shelving unit). No Extension is required along side a shelving unit. Illustrations below demonstrate a nominal 18-in width; the same logic applies to 24-in width. Bench-to-Bench (B:B) Credenza-to-Credenza (C:C) or Credenza-to-Desk (C:D) Credenza-to-Bench (C:B) Desk-to-Bench (D:B) 1.25 Extension Dock Extension 18 Dock L (same as shown at left) Optional Finished Back Optional Finished Back Optional Finished Back on Bench T (same as shown at left) (same as shown at left) Required Finished Back Required Finished Back X (same as shown at left) (same as shown at left) (not available) Required Finished Back Extensions (for all) 0.5 Extension for offset to Shelving 1.25 Extension for offset to units with doors, drawers, or back panels Drawer/door opening direction Shelving (no Extension needed) AP7

8 Casegoods: Prato April 1, 2017 Product No. List $ Product No. List $ Tables Rectangular Top w d 29.9h Table Only Table with Drawers Table Pnl-Pnl 60x PAC Table Pnl-Pnl 60x PAC Table Pnl-Pnl 66x PAC PA? Table Pnl-Pnl 66x PAC PA? Table Pnl-Pnl 72x PAC PA? Table Pnl-Pnl 72x PAC PA? Table Pnl-Pnl 78x PAC PA? Table Pnl-Pnl 84x PAC Table Pnl-Pnl 84x PAC Table Pnl-Pnl 90x PAC Table Pnl-Pnl 90x PAC Table Pnl-Pnl 96x PAC Table Pnl-Pnl 96x PAC Table Pnl-Pnl 96x PAC Table Pnl-Pnl 108x PAC Table Pnl-Pnl 120x PAC ? On Tables with Drawers, specify drawer configuration (left:right): For 2Box:2Box, change 3rd digit from? to H, add $1612. For 2Box:(blank), change 3rd digit from? to K, add $806. For (blank):2box, change 3rd digit from? to N, add $806.! Notes- Modesty is 10.4-in high and located on center, except 30d Table with Drawers where visitor set back is 11.6-in. All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. + Options (Tables with Drawers): Face Locks are included on all pedestals. For no locks, specify Option NL. AP8

9 Casegoods: Prato April 1, 2017 Product No. List $ Table-Desks, Panel and Leg Rectangular Top w d 29.9h Full Column Table-Desk Pnl-Col 66x PCQ Table-Desk Pnl-Col 66x PCQ Table-Desk Pnl-Col 72x PCQ Table-Desk Pnl-Col 72x PCQ Table-Desk Pnl-Col 78x PCQ Table-Desk Pnl-Col 78x PCQ Table-Desks with Panel and Leg are non-handed; the column leg is centered. Standard column leg finish is MSBN Satin Brushed Nickel. + Options: To add a Power-Data Module to the column leg, append P to the, add $553. (Includes duplex outlet and dual RJ-45 jacks; field wiring required.) Table-Desks, Pedestal and Leg Rectangular Top w d 29.9h Full Column Table-Desk Ped-Col 66x PC? Table-Desk Ped-Col 66x PC? Table-Desk Ped-Col 72x PC? Table-Desk Ped-Col 72x PC? Table-Desk Ped-Col 78x PC? Table-Desk Ped-Col 78x PC? ? Specify configuration (user s left:right) by modifying the : For Column:2BF, change the 3rd digit from? to R. For Column:2F, change the 3rd digit from? to S. For 2BF:Column, change the 3rd digit from? to T. For 2F:Column, change the 3rd digit from? to U. Handedness is determined at installation, by orientation of the pedestal and column leg. Available in open format only; there is no modesty panel option. All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. Face Locks are included on all pedestals. For no locks, specify Option NL. Standard column leg finish is MSBN Satin Brushed Nickel. + Options: To add a Power-Data Module to the column leg, append P to the, add $553. (Includes duplex outlet and dual RJ-45 jacks; field wiring required.) AP9

10 Casegoods: Prato April 1, 2017 Product No. List $ Product No. List $ Runoffs, Panel End 24d w 24d 29.9h From Bench From Credenza Runoff/Panel24: PD1B PD1C Runoff/Panel24: PD1B PD1C Runoff/Panel24: PD1B PD1C Runoff/Panel24: PD1B PD1C Runoff/Panel24: PD1B PD1C d w 30d 29.9h From Bench From Credenza Runoff/Panel30: PD1B PD1C Runoff/Panel30: PD1B PD1C Runoff/Panel30: PD1B PD1C Runoff/Panel30: PD1B PD1C Runoff/Panel30: PD1B PD1C d w 36d 29.9h From Bench From Credenza Runoff/Panel36: PD1B PD1C Runoff/Panel36: PD1B PD1C Runoff/Panel36: PD1B PD1C Runoff/Panel36: PD1B PD1C Runoff/Panel36: PD1B PD1C Standard offset from rear edge of credenza is 4.5-in. IMPORTANT: Indicate the placement in inches from LH end of credenza top, or indicate flush right. Maximum open span (without pedestals) is 54-in; use Top Support Keels (page AP15) for larger spans. Do not add hutches directly to the top. + Options/Parametrics: Widths: Replace Product No. width code with actual dimension; use next larger std size for pricing. Runoffs, Pedestal 30d w 30d 29.9h From Bench From Credenza Runoff/2BF30: PDEB PDEC Runoff/2BF30: PDEB PDEC Runoff/2BF30: PDEB PDEC Runoff/2BF30: PDEB PDEC d w 36d 29.9h From Bench From Credenza Runoff/2BF36: PDEB PDEC Runoff/2BF36: PDEB PDEC Runoff/2BF36: PDEB PDEC Runoff/2BF36: PDEB PDEC Standard offset from rear edge of credenza is 4.5-in. IMPORTANT: Indicate the placement in inches from LH end of credenza top, or indicate flush right. Maximum open span (without pedestals) is 54-in; use Top Support Keels (page AP15) for larger spans. Do not add hutches directly to the top. + Options/Parametrics: Widths: Replace Product No. width code with actual dimension; use next larger std size for pricing. For 2F (File-File) pedestal instead of the 2BF, change the third digit from E to G; no price change. AP10

11 Casegoods: Prato April 1, 2017 Product No. List $ Runoff, DemiColumn-to-Bench 24d w 24d 29.9h Credenza-to-Bench Runoff/DemiColumn24: PDVC Runoff/DemiColumn24: PDVC Runoff/DemiColumn24: PDVC Runoff/DemiColumn24: PDVC d w 30d 29.9h Credenza-to-Bench Runoff/DemiColumn30: PDVC Runoff/DemiColumn30: PDVC Runoff/DemiColumn30: PDVC Runoff/DemiColumn30: PDVC d w 36d 29.9h Credenza-to-Bench Runoff/DemiColumn36: PDVC Runoff/DemiColumn36: PDVC Runoff/DemiColumn36: PDVC Runoff/DemiColumn36: PDVC Standard offset from rear edge of credenza is 4.5-in. IMPORTANT: Indicate the placement in inches from LH end of credenza top, or indicate flush right. Maximum open span (without pedestals) is 54-in; use Top Support Keels (page AP15) for larger spans. Runoff/DemiColumn units, 68 wide, should be used with 18d Dock/Bench units only. Standard column leg finish is MSBN Satin Brushed Nickel. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. To add a Power-Data Module to the column leg, append P to the, add $553. (Includes duplex outlet and dual RJ-45 jacks; field wiring required.) Runoffs, Column Leg 24d w 24d 29.9h From Credenza Runoff/Column24: PDWC Runoff/Column24: PDWC Runoff/Column24: PDWC Runoff/Column24: PDWC d w 30d 29.9h From Credenza Runoff/Column30: PDWC Runoff/Column30: PDWC Runoff/Column30: PDWC Runoff/Column30: PDWC d w 36d 29.9h From Credenza Runoff/Column36: PDWC Runoff/Column36: PDWC Runoff/Column36: PDWC Runoff/Column36: PDWC Standard offset from rear edge of credenza is 4.5-in. IMPORTANT: Indicate the placement in inches from LH end of credenza top, or indicate flush right. Maximum open span (without pedestals) is 54-in; use Top Support Keels (page AP15) for larger spans. Standard column leg finish is MSBN Satin Brushed Nickel. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. To add a Power-Data Module to the column leg, append P to the, add $553. (Includes duplex outlet and dual RJ-45 jacks; field wiring required.) AP11

12 Casegoods: Prato April 1, 2017 Bridges, Top Only 18d w 18d 28.4h 1.5-in Top Bridge18Top: PEAN Bridge18Top: PEAN d w 24d 28.4h 1.5-in Top Bridge24Top: PEAN Bridge24Top: PEAN Product No. List $ Product No. List $ Bridge Tops are non-handed. For desk height bridge (overlapping the credenza), see top listings on opposite page. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. Bridges, Fixed KneePanel 18d w 18d 28.4h User Left Mounting User Right Mounting Bridge18/Fixed: PEBL PEBR Bridge18/Fixed: PEBL PEBR d w 24d 28.4h User Left Mounting User Right Mounting Bridge24/Fixed: PEBL PEBR Bridge24/Fixed: PEBL PEBR All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. Finished modesty panel. Modesty panel is designed to screw to two L-Panels. All bridges are flush to credenza surface height and mount to the underside of desks AP12

13 Casegoods: Prato April 1, 2017 Product No. List $ Product No. List $ Bridges, Removable KneePanel 18d w 18d 28.4h User Left Mounting User Right Mounting Bridge18/Removable: PECL PECR Bridge18/Removable: PECL PECR d w 24d 28.4h User Left Mounting User Right Mounting Bridge24/Removable: PECL PECR Bridge24/Removable: PECL PECR All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. Unfinished back on Removable panels. Removable panels leave a 2.5-in gap under the top for wire management. Removable panels sit out from the wall 3-in and attach with Velcro to two spacers. All bridges are flush to credenza surface height and mount to the underside of desks. AP13

14 Casegoods: Prato April 1, 2017 Prod.No. Prefix Depth (for B, C Peds) Depth (for D Peds) Tops 1.5th Finished All Sides Top 18w PFC Top 24w PFC Top 30w PFC Top 36w PFC Top 42w PFC Top 48w PFC Top 54w PFC Top 60w PFC Top 66w PFC Top 72w PFC Top 78w PFC Top 84w PFC Top 90w PFC Top 96w PFC Top 102w PFC Top 108w PFC Top 114w PFC Top 120w PFC Determine by appending the Depth to the Prod.No. Prefix; use corresponding price. Order tops for all B, C and D pedestals, or as runoff tops. Tops may need to be parametrically extended for Dock-L and Dock-T units. Maximum unsupported span is 54 inches. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. AP14

15 Product No. List $ Top Connecting Hardware For Flush L-Connections Black Resin Finish Top Connecting Hardware for all Tops PFM 54 This hardware connects tops on the same plane, hence adapts the above tops to be runoff-bridges. Top Support Keels w 2d 1h Black Resin Finish Top Support Keel: LG Top Support Keel: LG Top Support Keel: LG Top Support Keel: LG Top Support Keel: LG Top Support Keel: LG Required for unsupported work surface spans of 54 inches or more. Unit is a black rectangular 1 x 2 tube screwed to the underside of the work surface. Top Support Column Legs 2.25th, (D) Height Only DemiColumn (D:B) DemiCol PwrData Full Column (D) FullCol PwrData Column Leg for 24d Tops PGB PGBP PGC PGCP Column Leg for 30d Tops PGB PGBP PGC PGCP Column Leg for 36d Tops PGB PGBP PGC PGCP Non-handed and typically mounted to the user s side. Full Column for desk (D) height; Demi-Column for desk-to-bench (D:B). Maximum unsupported span is 54 inches. Power-Data modules include a duplex outlet and dual RJ-45 jacks; field wiring required. Standard column leg finish is MSBN Satin Brushed Nickel. Depth dimension is 1.5-in less than half the overall depth of the top used. FullColumns and DemiColumns cannot be used on the same top, as shown below. AP15

16 Prod. No. List $ Prod. No. List $ Prod. No. List $ Prod. No. List $ Top Divider Panels Wood Veneer 13.9h 1Side 1Side w Slot 2Sides 2Sides Slot1Side TopDivider Wood 18 PFKW PFLW PFMW PFNW TopDivider Wood 24 PFKW PFLW PFMW PFNW TopDivider Wood 30 PFKW PFLW PFMW PFNW TopDivider Wood 36 PFKW PFLW PFMW PFNW TopDivider Wood 42 PFKW PFLW PFMW PFNW TopDivider Wood 48 PFKW PFLW PFMW PFNW TopDivider Wood 54 PFKW PFLW PFMW PFNW TopDivider Wood 60 PFKW PFLW PFMW PFNW TopDivider Wood 66 PFKW PFLW PFMW PFNW TopDivider Wood 72 PFKW PFLW PFMW PFNW TopDivider Wood 78 PFKW PFLW PFMW PFNW TopDivider Wood 84 PFKW PFLW PFMW PFNW TopDivider Wood 90 PFKW PFLW PFMW PFNW TopDivider Wood 96 PFKW PFLW PFMW PFNW TopDivider Wood 102 PFKW PFLW PFMW PFNW TopDivider Wood 108 PFKW PFLW PFMW PFNW Back-Painted Glass 13.9h 1Side 1Side w Slot 2Sides 2Sides Slot1Side TopDivider GlassBP 18 PFKG PFLG PFMG PFNG TopDivider GlassBP 24 PFKG PFLG PFMG PFNG TopDivider GlassBP 30 PFKG PFLG PFMG PFNG TopDivider GlassBP 36 PFKG PFLG PFMG PFNG TopDivider GlassBP 42 PFKG PFLG PFMG PFNG TopDivider GlassBP 48 PFKG PFLG PFMG PFNG TopDivider GlassBP 54 PFKG PFLG PFMG PFNG TopDivider GlassBP 60 PFKG PFLG PFMG PFNG TopDivider GlassBP 66 PFKG PFLG PFMG PFNG TopDivider GlassBP 72 PFKG PFLG PFMG PFNG TopDivider GlassBP 78 PFKG PFLG PFMG PFNG TopDivider GlassBP 84 PFKG PFLG PFMG PFNG TopDivider GlassBP 90 PFKG PFLG PFMG PFNG TopDivider GlassBP 96 PFLG TopDivider GlassBP 102 PFLG TopDivider GlassBP 108 PFLG AP16

17 Prod. No. List $ Prod. No. List $ Prod. No. List $ Prod. No. List $ Top Divider Panels (cont.) Metal 13.9h 1Side 1Side w Slot 2Sides 2Sides Slot1Side TopDivider Metal 18 PFKM PFLM PFMM PFNM TopDivider Metal 24 PFKM PFLM PFMM PFNM TopDivider Metal 30 PFKM PFLM PFMM PFNM TopDivider Metal 36 PFKM PFLM PFMM PFNM TopDivider Metal 42 PFKM PFLM PFMM PFNM TopDivider Metal 48 PFKM PFLM PFMM PFNM TopDivider Metal 54 PFKM PFLM PFMM PFNM TopDivider Metal 60 PFKM PFLM PFMM PFNM TopDivider Metal 66 PFKM PFLM PFMM PFNM TopDivider Metal 72 PFKM PFLM PFMM PFNM TopDivider Metal 78 PFKM PFLM PFMM PFNM TopDivider Metal 84 PFKM PFLM PFMM PFNM TopDivider Metal 90 PFKM PFLM PFMM PFNM TopDivider Metal 96 PFKM PFLM PFMM PFNM TopDivider Metal 102 PFKM PFLM PFMM PFNM TopDivider Metal 108 PFKM PFLM PFMM PFNM Top Divider Panels attach to any horizontal surface. Specify accessory shelves from the Wall Accessories listings. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. For Magnet-Ready surfaces through 96w, specify Option MG; add $3 per linear foot per face. Available on Wood, BPGlass & Metal only. AP17

18 Mobile Storage Mobile 18w d 25.5h Finished Back MobileStorage: Box/File 18x24 24 PJAE MobileStorage: Box/File 18x30 30 PJAE Product No. List $ Product No. List $ All vertical face panels have horizontal veneers; quartered and rift veneers are recommended. + Options (non-dock units): Face Locks are included on all drawer and door pedestals. For no locks, specify Option NL. For a secondary species/color on a drawer front, specify Option SND; add $343. Bench Storage 18d Unfinished Sides (order top separately) w d 18h Unfinished Back B18 Bench Modules PJB $ sum Open Shelf With Shelf Dividers B Shelving 18x A B Shelving 24x A A24D B Shelving 30x A A30D B Shelving 36x A A36D B Shelving 42x A A42D B Shelving 48x A A48D B Shelving 54x A A54D B Shelving 60x A A60D B Shelving 72x A A72D B Shelving AdjHt 30x AH B Shelving AdjHt 36x AH Extension Shelving Dock 1.25 Extension B Cabinet 18x18 LH CL B Cabinet 18x18 RH CR B Cabinet 30x C B Cabinet 36x C B Cabinet AdjHt 30x CAH B Cabinet AdjHt 36x CAH B Box-Box 18x P B Pencil-File 18x18 (No Locks) Q B Pencil-File 24x18 (No Locks) Q B Pencil-File 30x18 (No Locks) Q B Pencil-File 36x18 (No Locks) Q B File 18x F B File 24x F B File 30x F B File 36x F B TrashRecycle 18x N B TrashRecycle 30x N B Extension for Docking 0.50x Y2 80 B Extension for Docking 1.25x Y5 91 B:B Dock LTX 17.25x Z B:B Dock LTX 23.25x Z To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately and are available up to a maximum width of 120-in. See page AP14. Width for Back Panel and/or Wall Panel is the sum of all widths for the s you itemized. + Options (non-dock units): Face Locks are included on all drawer and door pedestals, except as noted. For no locks, specify Option NL. For finished left side, append A to the, add $124. For finished right side, append B to the, add $124. For finished both sides, append C to the, add $248. Finished Back Panels must be ordered separately and may span multiple modules; see listing on page AP22. For a secondary species/color on a door or drawer front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. A18 A18 {A18} A18 Color/Finish Woods listed at Wood1 level AP18

19 Product No. Dimensions Fabric List $ Leather List $ Bench Cushions, 18 Deep PKC w COM 344 Gr6 415 Gr COL 396 L d Gr1 384 Gr7 423 Gr L1 464 L th Gr2 389 Gr8 433 Gr L2 474 L yd Gr3 394 Gr9 444 Gr L3 490 L sf Gr4 400 Gr Gr L4 505 L Gr5 407 Gr Gr L5 526 L PKC w COM 351 Gr6 422 Gr COL 404 L d Gr1 391 Gr7 430 Gr L1 489 L th Gr2 396 Gr8 440 Gr L2 502 L yd Gr3 401 Gr9 451 Gr L3 521 L sf Gr4 407 Gr Gr L4 541 L Gr5 414 Gr Gr L5 567 L PKC w COM 357 Gr6 428 Gr COL 411 L d Gr1 397 Gr7 436 Gr L1 512 L th Gr2 402 Gr8 446 Gr L2 528 L yd Gr3 407 Gr9 457 Gr L3 551 L sf Gr4 413 Gr Gr L4 575 L Gr5 420 Gr Gr L5 606 L PKC w COM 420 Gr6 491 Gr COL 483 L d Gr1 460 Gr7 499 Gr L1 601 L th Gr2 465 Gr8 509 Gr L2 620 L yd Gr3 470 Gr9 520 Gr L3 647 L sf Gr4 476 Gr Gr L4 674 L Gr5 483 Gr Gr L5 711 L PKC w COM 433 Gr6 504 Gr COL 498 L d Gr1 473 Gr7 512 Gr L1 633 L th Gr2 478 Gr8 522 Gr L2 654 L yd Gr3 483 Gr9 533 Gr L3 685 L sf Gr4 489 Gr Gr L4 716 L Gr5 496 Gr Gr L5 758 L PKC w COM 510 Gr6 581 Gr COL 587 L d Gr1 550 Gr7 589 Gr L1 738 L th Gr2 555 Gr8 599 Gr L2 761 L yd Gr3 560 Gr9 610 Gr L3 796 L sf Gr4 566 Gr Gr L4 831 L Gr5 573 Gr Gr L5 877 L PKC w COM 528 Gr6 740 Gr COL 607 L6 994 (Railroaded) 17.3d Gr1 649 Gr7 766 Gr L1 775 L th Gr2 663 Gr8 794 Gr L2 801 L yds Gr3 679 Gr9 827 Gr L3 839 L sf Gr4 697 Gr Gr L4 878 L Gr5 717 Gr Gr L5 930 L PKC w COM 568 Gr6 792 Gr COL 653 L (Railroaded) 17.3d Gr1 695 Gr7 819 Gr L1 838 L th Gr2 711 Gr8 849 Gr L2 866 L yds Gr3 728 Gr9 883 Gr L3 909 L sf Gr4 747 Gr Gr L4 951 L Gr5 768 Gr Gr L L PKC w COM 601 Gr6 837 Gr COL 691 L (Railroaded) 17.3d Gr1 735 Gr7 865 Gr L1 893 L th Gr2 751 Gr8 897 Gr L2 924 L yds Gr3 769 Gr9 933 Gr L3 970 L sf Gr4 789 Gr Gr L L Gr5 811 Gr Gr L L PKC w COM 608 Gr6 856 Gr COL 699 L (Railroaded) 17.3d Gr1 749 Gr7 885 Gr L1 917 L th Gr2 766 Gr8 919 Gr L2 951 L yds Gr3 784 Gr9 957 Gr L L sf Gr4 805 Gr Gr L L Gr5 829 Gr Gr L L Identify which Dock/Bench Top is to receive the cushion. Specify by Product No. and the starting location from the left end, expressed in inches. Cushions 52-in or more in width require fabric to be railroaded; use multiple cushions to avoid railroading. Leather footage requires a usable area of at least 20% greater than the width and depth shown above. Color/Finish Woods listed at Wood1 level AP19 Ship COM/COL materials and memo samples to: TUOHY Furniture Corporation P5 Upholstery Receiving 42 Saint Albans Place Chatfield, MN 55923

20 Bench Storage 24d Unfinished Sides (order top separately) w d 18h Unfinished Back B24 Bench Modules PJC $ sum Product No. List $ Product No. List $ Open Shelf With Shelf Dividers B Shelving 18x A B Shelving 24x A A24D B Shelving 30x A A30D B Shelving 36x A A36D B Shelving 42x A A42D B Shelving 48x A A48D B Shelving 54x A A54D B Shelving 60x A A60D B Shelving 72x A A72D B Shelving AdjHt 30x AH B Shelving AdjHt 36x AH B Shelving 2-Sides 18x B B Shelving 2-Sides 24x B B24D B Shelving 2-Sides 30x B B30D B Shelving 2-Sides 36x B B36D B Shelving 2-Sides 42x B B42D B Shelving 2-Sides 48x B B48D B Shelving 2-Sides 54x B B54D B Shelving 2-Sides 72x B B72D Extension Dock 1.25 Extension B Cabinet 18x24 LH CL B Cabinet 18x24 RH CR B Cabinet 30x C B Cabinet 36x C B Cabinet AdjHt 30x CAH B Cabinet AdjHt 36x CAH B Box-Box 18x P B Pencil-File 18x24 (No Locks) Q B Pencil-File 24x24 (No Locks) Q B Pencil-File 30x24 (No Locks) Q B Pencil-File 36x24 (No Locks) Q B File 18x F B File 24x F B File 30x F B File 36x F B TrashRecycle 18x N B TrashRecycle 30x N Shelving B Extension for Docking 0.50x Y2 80 B Extension for Docking 1.25x Y5 97 B:B Dock LTX 17.25x Z B:B Dock LTX 23.25x Z To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately and are available up to a maximum width of 120-in. See page AP14. Width for Back Panel and/or Wall Panel is the sum of all widths for the s you itemized. + Options (non-dock units): Face Locks are included on all drawer and door pedestals, except as noted. For no locks, specify Option NL. For finished left side, append A to the, add $161. For finished right side, append B to the, add $161. For finished both sides, append C to the, add $322. Finished Back Panels must be ordered separately and may span multiple modules; see listing on page AP22. For a secondary species/color on a door or drawer front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. A18 A18 {A18} A18 AP20

21 Product No. Dimensions Fabric List $ Leather List $ Bench Cushions, 24 Deep PKC w COM 348 Gr6 466 Gr COL 400 L d Gr1 415 Gr7 480 Gr L1 485 L th Gr2 423 Gr8 496 Gr L2 498 L yds Gr3 432 Gr9 514 Gr L3 517 L sf Gr4 442 Gr Gr L4 537 L Gr5 453 Gr Gr L5 563 L PKC w COM 361 Gr6 479 Gr COL 415 L d Gr1 428 Gr7 493 Gr L1 522 L th Gr2 436 Gr8 509 Gr L2 538 L yds Gr3 445 Gr9 527 Gr L3 563 L sf Gr4 455 Gr Gr L4 587 L Gr5 466 Gr Gr L5 620 L PKC w COM 374 Gr6 492 Gr COL 430 L d Gr1 441 Gr7 506 Gr L1 557 L th Gr2 449 Gr8 522 Gr L2 577 L yds Gr3 458 Gr9 540 Gr L3 606 L sf Gr4 468 Gr Gr L4 636 L Gr5 479 Gr Gr L5 675 L PKC w COM 442 Gr6 560 Gr COL 508 L d Gr1 509 Gr7 574 Gr L1 656 L th Gr2 517 Gr8 590 Gr L2 679 L yds Gr3 526 Gr9 608 Gr L3 713 L sf Gr4 536 Gr Gr L4 747 L Gr5 547 Gr Gr L5 793 L PKC w COM 453 Gr6 571 Gr COL 521 L d Gr1 520 Gr7 585 Gr L1 690 L th Gr2 528 Gr8 601 Gr L2 716 L yds Gr3 537 Gr9 619 Gr L3 755 L sf Gr4 547 Gr Gr L4 794 L Gr5 558 Gr Gr L5 846 L PKC w COM 539 Gr6 657 Gr COL 620 L d Gr1 606 Gr7 671 Gr L1 810 L th Gr2 614 Gr8 687 Gr L2 839 L yds Gr3 623 Gr9 705 Gr L3 883 L sf Gr4 633 Gr Gr L4 927 L Gr5 644 Gr Gr L5 985 L PKC w COM 574 Gr6 781 Gr COL 660 L (Railroaded) 23.3d Gr1 691 Gr7 805 Gr L1 872 L th Gr2 705 Gr8 833 Gr L2 905 L yds Gr3 721 Gr9 865 Gr L3 953 L sf Gr4 739 Gr Gr L L Gr5 758 Gr Gr L L PKC w COM 625 Gr6 832 Gr COL 719 L (Railroaded) 23.3d Gr1 742 Gr7 856 Gr L1 952 L th Gr2 756 Gr8 884 Gr L2 988 L yds Gr3 772 Gr9 916 Gr L L sf Gr4 790 Gr Gr L L Gr5 809 Gr Gr L L PKC w COM 647 Gr6 883 Gr COL 744 L (Railroaded) 23.3d Gr1 781 Gr7 911 Gr L1 998 L th Gr2 797 Gr8 943 Gr L L yds Gr3 815 Gr9 979 Gr L L sf Gr4 835 Gr Gr L L Gr5 857 Gr Gr L L PKC w COM 668 Gr6 934 Gr COL 768 L (Railroaded) 23.3d Gr1 819 Gr7 965 Gr L L th Gr2 837 Gr Gr L L yds Gr3 857 Gr Gr L L sf Gr4 880 Gr Gr L L Gr5 904 Gr Gr L L Identify which Top/B-Pedestal is to receive the cushion. Specify by Product No. and the starting location from the left end, expressed in inches. Cushions 52-in or more in width require fabric to be railroaded; use multiple cushions to avoid railroading. Leather footage requires a usable area of at least 20% greater than the width and depth shown above. AP21 Ship COM/COL materials and memo samples to: TUOHY Furniture Corporation P5 Upholstery Receiving 42 Saint Albans Place Chatfield, MN 55923

22 Product No. List $ Product No. List $ Product No. List $ Bench-Credenza Back Panels For Bench Storage For Credenza Storage th Finished Back Finished Back Finished Knee+Back Back Panel 15w PJZB PJZC PJZCF Back Panel 18w PJZB PJZC PJZCF Back Panel 30w PJZB PJZC PJZCF Back Panel 36w PJZB PJZC PJZCF Back Panel 42w PJZB PJZC PJZCF Back Panel 48w PJZB PJZC PJZCF Back Panel 54w PJZB PJZC PJZCF Back Panel 60w PJZB PJZC PJZCF Back Panel 66w PJZB PJZC PJZCF Back Panel 72w PJZB PJZC PJZCF Back Panel 78w PJZB PJZC PJZCF Back Panel 84w PJZB PJZC PJZCF Back Panel 90w PJZB PJZC PJZCF Back Panel 96w PJZB PJZC PJZCF Back Panel 102w PJZB PJZC PJZCF Back Panel 108w PJZB PJZC PJZCF Back Panel 114w PJZB PJZC PJZCF Back Panel 120w PJZB PJZC PJZCF All back panels are 0.75-in thick, finished one side except as noted. Prices shown here regard Wood1 finishes. Other finishes are available on request. Width for Back Panels is the sum of all widths for the s you have itemized. Maximum unsupported span is 54 inches. When specifying Back Panels while reversing pedestal direction in a run, correlate width dimensions carefully. + Options/Parametrics: Widths: Replace number codes with actual width dimension; use next larger std size for pricing. AP22

23 Product No. List $ Credenza Storage 15d Unfinished Sides (order top separately) w d 26.9h Unfinished Back C15 Credenza Modules PJD $ sum C Shelving/CPU Storage 12x A C Shelving 15x A C Shelving 18x A C Shelving 24x A C Shelving 30x A C Shelving 36x A C Cabinet 15x15 LH CL C Cabinet 15x15 RH CR C Cabinet 18x15 LH CL C Cabinet 18x15 RH CR C Cabinet DblDoor 30x C C Cabinet DblDoor 36x C C Extension for Docking 0.50x Y2 86 C Extension for Docking 1.25x Y5 97 To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately and are available up to a maximum width of 120-in. See page AP14. + Options: Face Locks are included on all door pedestals. For no locks, specify Option NL. For ventilation slots, specify Option VS; add $308. For finished left side, append A to the, add $166. For finished right side, append B to the, add $166. For finished both sides, append C to the, add $331. Finished Back Panels must be ordered separately and may span multiple modules; see listing on page AP22. For a secondary species/color on a door front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. AP23

24 Product No. List $ Credenza Storage 18d Unfinished Sides (order top separately) w d 26.9h Unfinished Back C18 Credenza Modules PJE $ sum C End Panel 1.5x E 128 Open Gap [w] [15-54] 0 1G[w] 0 C KneePanel-Fixed [w] [15-54] K[w] 3.6[w]+315 C KneePanel-Removable [w] [15-54] 3 1R[w] 3.6[w]+404 C KneePanel-SpanSupport [w] [18-36] 1.5 1S[w] 3.6[w]+761 C Shelving 12x A C Shelving 15x A C Shelving 18x A C Shelving 24x A C Shelving 30x A C Shelving 36x A C Cabinet 12x18 LH CL C Cabinet 12x18 RH CR C Cabinet 15x18 LH CL C Cabinet 15x18 RH CR C Cabinet 18x18 LH CL C Cabinet 18x18 RH CR C Cabinet 30x18 Dbl C C Cabinet 36x18 Dbl C C Pencil/Box/File 18x D C Pencil/Box/File 30x D C Pencil/Box/File 36x D C File/File 18x G C File/File 30x G C File/File 36x G C Full Front: Box-Box-File 18x K C Full Front: File-File 18x L C Full Front: Utility Drawer 18x M C Full Front: TrashRecycle 18x N CB Box/File 18x R CB Box/Pencil-File 18x S CB Box/Pencil-File 30x S CB Box/Pencil-File 36x S CB Box/DblCab 30x T CB Box/DblCab 36x T CB XShelf/Cabinet 15x18 LH UL CB XShelf/Cabinet 15x18 RH UR CB XShelf/Cabinet 18x18 LH UL CB XShelf/Cabinet 18x18 RH UR CB XShelf/Cabinet 30x18 Dbl U CB XShelf/Cabinet 36x18 Dbl U CB XShelf/Pencil-File 18x18 (No Locks) V CB XShelf/Pencil-File 24x18 (No Locks) V CB XShelf/Pencil-File 30x18 (No Locks) V CB XShelf/Pencil-File 36x18 (No Locks) V CB XShelf/File 18x W CB XShelf/File 24x W CB XShelf/File 30x W CB XShelf/File 36x W CB XShelf/TrashRecycle 18x X AP24

25 Credenza Storage 18d (cont.) C Extension for Docking 0.50x Y Dock 1.25 C Extension for Docking 1.25x Y5 97 Extension Extension C:C/C:D Dock LTX 14.25x Z C:C/C:D Dock LTX 17.25x Z C:C/C:D Dock LTX 23.25x Z Shelving Product No. List $ C:B Dock-L w Shelf 18x17.25 LH ZLAL C:B Dock-L w Shelf 18x17.25 RH ZLAR C:B Dock-L w Shelf 24x17.25 LH ZLAL C:B Dock-L w Shelf 24x17.25 RH ZLAR C:B Dock-L w BoxDwr 18x17.25 LH ZLDL C:B Dock-L w BoxDwr 18x17.25 RH ZLDR C:B Dock-L w BoxDwr 24x17.25 LH ZLDL C:B Dock-L w BoxDwr 24x17.25 RH ZLDR C:B Dock-T/X w Shelf 17.25x ZTA C:B Dock-T/X w Shelf 23.25x ZTA C:B Dock-T w BoxDwr 17.25x ZTD C:B Dock-T w BoxDwr 23.25x ZTD To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately; see page AP14. CB Pedestals with XShelf in the L-End or R-End position have a full vertical end panel. Utility Drawer has a usable interior space of 15.5w 16h 13.5d, and includes rear vent slots (cord exits). + Options (non-dock units): Face Locks are included on all drawer and door pedestals, except as noted. For no locks, specify Option NL. For ventilation slots, specify Option VS; add $308. For finished left side, append A to the, add $166. For finished right side, append B to the, add $166. For finished both sides, append C to the, add $331. Finished Back Panels must be ordered separately and may span multiple modules; see listing on page AP22. For a secondary species/color on a door or drawer front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. Exception: Adjoining CB XShelf pedestals cannot be reversed one to another. A18 A18 {A18} A18 A18 A18 1G18 A18 AP25

26 Product No. List $ Credenza Storage 24d Unfinished Sides (order top separately) w d 26.9h Unfinished Back C24 Credenza Modules PJF $ sum C End Panel 1.5x E 167 Open Gap [w] [15-54] 0 1G[w] 0 C KneePanel-Fixed [w] [15-54] K[w] 3.6[w]+315 C KneePanel-Removable [w] [15-54] 3 1R[w] 3.6[w]+404 C KneePanel-SpanSupport [w] [18-36] 1.5 1S[w] 3.6[w]+761 C Shelving 12x A C Shelving 15x A C Shelving 18x A C Shelving 24x A C Shelving 30x A C Shelving 36x A C Cabinet 12x24 LH CL C Cabinet 12x24 RH CR C Cabinet 15x24 LH CL C Cabinet 15x24 RH CR C Cabinet 18x24 LH CL C Cabinet 18x24 RH CR C Cabinet 30x24 Dbl C C Cabinet 36x24 Dbl C C Pencil/Box/File 18x D C Pencil/Box/File 30x D C Pencil/Box/File 36x D C File/File 18x G C File/File 30x G C File/File 36x G C Full Front: Box-Box-File 18x K C Full Front: File-File 18x L C Full Front: Utility Drawer 18x M C Full Front: TrashRecycle 18x N CB Box/File 18x R CB Box/Pencil-File 18x S CB Box/Pencil-File 30x S CB Box/Pencil-File 36x S CB Box/DblCab 30x T CB Box/DblCab 36x T CB XShelf/Cabinet 15x24 LH UL CB XShelf/Cabinet 15x24 RH UR CB XShelf/Cabinet 18x24 LH UL CB XShelf/Cabinet 18x24 RH UR CB XShelf/Cabinet 30x24 Dbl U CB XShelf/Cabinet 36x24 Dbl U CB XShelf/Pencil-File 18x24 (No Locks) V CB XShelf/Pencil-File 24x24 (No Locks) V CB XShelf/Pencil-File 30x24 (No Locks) V CB XShelf/Pencil-File 36x24 (No Locks) V CB XShelf/File 18x W CB XShelf/File 24x W CB XShelf/File 30x W CB XShelf/File 36x W CB XShelf/TrashRecycle 18x X AP26

27 Product No. List $ Credenza Storage 24d (cont.) C Extension for Docking 0.50x Y2 111 C Extension for Docking 1.25x Y Dock 1.25 Extension Extension C:C/C:D Dock LTX 14.25x Z C:C/C:D Dock LTX 17.25x Z C:C/C:D Dock LTX 23.25x Z Shelving C:B Dock-L w Shelf 18x23.25 LH ZLAL C:B Dock-L w Shelf 18x23.25 RH ZLAR C:B Dock-L w Shelf 24x23.25 LH ZLAL C:B Dock-L w Shelf 24x23.25 RH ZLAR C:B Dock-L w BoxDwr 18x23.25 LH ZLDL C:B Dock-L w BoxDwr 18x23.25 RH ZLDR C:B Dock-L w BoxDwr 24x23.25 LH ZLDL C:B Dock-L w BoxDwr 24x23.25 RH ZLDR C:B Dock-T/X w Shelf 17.25x ZTA C:B Dock-T/X w Shelf 23.25x ZTA C:B Dock-T w BoxDwr 17.25x ZTD C:B Dock-T w BoxDwr 23.25x ZTD To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately; see page AP14. CB Pedestals with XShelf in the L-End or R-End position have a full vertical end panel. Utility Drawer has a usable interior space of 15.5w 16h 19.5d, and includes rear vent slots (cord exits). + Options (non-dock units): Face Locks are included on all drawer and door pedestals, except as noted. For no locks, specify Option NL. For ventilation slots, specify Option VS; add $308. For finished left side, append A to the, add $166. For finished right side, append B to the, add $166. For finished both sides, append C to the, add $331. Finished Back Panels must be ordered separately and may span multiple modules; see listing on page AP22. For a secondary species/color on a door or drawer front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. Exception: Adjoining CB XShelf pedestals cannot be reversed one to another. Credenza CB Dividers & Trays Blade Dividers for CB Pedestals 0.25w 13.6d 4.2h Divider CB Divider Half Height PKD4 268 Standard metal finish is MRBS Resin Brushed Steel. Trays for CB Pedestals Only w 13.4d 4h Tray CB Tray14 (End) 14.3 PKT CB Tray15 (Intermediate) 15 PKT CB Tray16 (Intermediate) 16 PKT CB Tray17 (End) 17.3 PKT CB Tray18 (Intermediate) 18 PKT CB Tray23 (End) 23.3 PKT CB Tray24 (Intermediate) 24 PKT24 448? Tray material from Wood1 finishes. CB Dividers not needed at the start/end of a CB-Pedestal run; these units already have end panels. Use CB Tray14 and CB Tray17 units where vertical end panels occur. CB Dividers and CB Trays may be used with 18d and 24d credenzas. AP27

28 Product No. List $ Product No. List $ Desk Storage 18d Unfinished Sides (order top separately) w d 28.4h Unfinished Back Finished Back D18 Desk Modules PJG $ sum PJGF $ sum D End Panel 1.5x E 147 1E 147 Open Gap [w] [15-54] 0 1G[w] 0 1G[w] 0 D KneePanel-Fixed [w] [15-54] K[w] 3.6[w]+315 1K[w]F 3.6[w]+315 D KneePanel-Removable [w] [15-54] 3 1R[w] 3.6[w]+404 D KneePanel-SpanSupport [w] [18-36] 1.5 1S[w] 3.6[w]+761 1S[w]F 3.6[w]+761 D Shelving 12x A A12F 1185 D Shelving 18x A A18F 1385 D Shelving 30x A A30F 1757 D Shelving 36x A A36F 1949 D Cabinet 12x18 LH CL CL12F 1580 D Cabinet 12x18 RH CR CR12F 1580 D Cabinet 18x18 LH CL CL18F 1897 D Cabinet 18x18 RH CR CR18F 1897 D Cabinet 30x18 Dbl C C30F 2207 D Cabinet 36x18 Dbl C C36F 2409 D Box/Box/File 18x E E18F 2098 D Box/Box/File 30x E E30F 2543 D Box/Box/File 36x E E36F 2726 D File/File 18x G G18F 1991 D File/File 30x G G30F 2353 D File/File 36x G G36F 2527 D Full Front: Box-Box-File 18x K K18F 2098 D Full Front: File-File 18x L L18F 1991 D Full Front: Utility Drawer 18x M M18F 1824 D Full Front: TrashRecycle 18x N N18F Extension Shelving Dock 1.25 Extension D Extension for Docking 0.50x Y2 86 D Extension for Docking 1.25x Y5 97 D:B Dock-L w Shelf 18x17.25 LH ZLAL D:B Dock-L w Shelf 18x17.25 RH ZLAR D:B Dock-L w Shelf 24x17.25 LH ZLAL D:B Dock-L w Shelf 24x17.25 RH ZLAR D:B Dock-L w BoxDwr 18x17.25 LH ZLDL D:B Dock-L w BoxDwr 18x17.25 RH ZLDR D:B Dock-L w BoxDwr 24x17.25 LH ZLDL D:B Dock-L w BoxDwr 24x17.25 RH ZLDR D:B Dock-T w Shelf 17.25x ZTA D:B Dock-T w Shelf 23.25x ZTA D:B Dock-T w BoxDwr 17.25x ZTD D:B Dock-T w BoxDwr 23.25x ZTD To order, specify the listed at top, then list the s in L to R order in your description. The total price is the sum of the prices for the s you itemized. Tops must be ordered separately and are flush to the pedestal front and back; see page AP14. D pedestals as listed are available with Unfinished or Finished Backs; do not order finished backs separately. Utility Drawer has a usable interior space of 15.5w 17.5h 13.5d, and includes rear vent slots (cord exits). + Options (non-dock units): Face Locks are included on all drawer and door pedestals. For no locks, specify Option NL. For ventilation slots, specify Option VS; add $308. For finished left side, append A to the, add $166. For finished right side, append B to the, add $166. For finished both sides, append C to the, add $331. For a secondary species/color on a door or drawer front, specify Option SND; add $343. To reverse the direction a pedestal faces, place the in brackets; e.g. {A18}. AP28