Thermo fans. Systemair range Systemair thermo fans are available in three different executions. The Multibox MUB-K ASF/KB. Flexible connection
|
|
- Valentine Rich
- 6 years ago
- Views:
Transcription
1 General Systemair thermo fans have been developed for the use in exhaust air systems where media with increased temperatures have to be transported. The special design allows a reliable operation also in systems with higher demands due to increased temperatures or polluted air, for example from kitchens, industrial ovens or in process air. Systemair range Systemair thermo fans are available in three different executions. The Multibox MUB-K variant masters higher demands due to the motor being separated from the air stream. Should regular maintenance/cleaning be necessary, the Systemair ranges KBT/KBR with swing out impeller/door assembly is the ideal solution. For roof exhaust installations we are offering our ranges DNV/DVNI with motor separated from the airstream. Systemair fans are suited to transport media with a continuous temperature of either 100 C or 120 C, depending on the range. Motors Thermo fans are equipped with IEC standard motors, with some exceptions speed controllable by voltage. All motors with protection class IP 54 and insulation class F. Motors with thermal contacts and extended leads for connection to a Systemair motor protection unit. Standard execution ASF/KB Flexible connection KBT/KBR WSD Weather roof for motor ASF/KB Flexible connection WBK Wall mounting bracket FGV-K Flexible connection UGS MUB-K FGV-K Flexible connection 163
2 KBT Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBT fans have impellers manufactured from galvanised sheet steel with forward-curved blades. The casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBT fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame.to protect the motors from overheating the KBT fans have integral thermal contacts with external leads for connection to a motor protection device. KBT 160E4 KBT 160DV KBT 180E4 KBT 200E4 Voltage/Frequency V/50 Hz Phase ~ Power at shaft W Current A 1,11 0,57 1,11 5,1 Maximum air flow m 3 /s (m 3 /h) 0,23 (830) 0,25 (900) 0,39(1240) 0,54(1950) R.p.m. min Max. temp of transp. air C Max. temp of transp. air when speed-controlled C Sound pressure level at 4/10 m db(a) 31/23 31/23 34/26 37/29 Weight kg Insulation class F F F F Enclosure class IP 54 IP 54 IP54 IP54 Capacitor μf Motor protection S-ET 10 STDT 16 S-ET 10 S-ET 10 Speed control, five step Transformer RTRE 1,5 RTRD 2 RTRE 1,5 RTRE 7 Speed control, five step high/low Transformer REU 1,5 + S-ET 10 RTRDU 2 REU 1,5 + S-ET 10 REU 7 + S-ET 10 Speed control, D/ two step 400 V Transformer - S-DT2 SKT - - Wiring diagram p A B C D E øg H J KBT , KBT , KBT ,
3 WSD p. 488 ASF/KB p. 489 WBK p. 489 ALS/KBT p. 489 KBT 160E4 L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,12 m 3 /s, P s = 120 Pa KBT 160DV = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,14 m 3 /s, P s = 134 Pa REV p. 463 S-ET p. 464 STDT p. 464 REU p. 454 KBT 180E4 L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,21 m 3 /s, P s = 210 Pa KBT 200E4 L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,26 m 3 /s, P s = 280 Pa RTRE p. 454 RTRDU/RTRD p
4 KBT Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBT fans have impellers manufactured from galvanised sheet steel with forward-curved blades. The casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBT fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame. To protect the motors from overheating the KBT fans have integral thermal contacts with external leads for connection to a motor protection device. KBT 200DV KBT 225E4 KBT 225DV KBT 250E4 Voltage/Frequency V/50 Hz Phase ~ Power at shaft W Current A 1,88 5,1 2,3 10,4 Maximum air flow m 3 /s (m 3 /h) 0,58 (2100) 0,76 (2750) 0,76 (2750) 1,08 (3900) R.p.m. min Max. temp of transp. air C Max. temp of transp. air when speed-controlled C Sound pressure level at 4/10 m db(a) 37/29 41/33 41/33 45/37 Weight kg Insulation class F F F F Enclosure class IP 54 IP 54 IP 54 IP 54 Capacitor μf Motor protection STDT 16 S-ET 10 STDT 16 AWE-SK Speed control, five step Transformer RTRD 2 RTRE 7 RTRD 4 - Speed control, five step high/low Transformer RTRDU 2 REU + S-ET 10 RTRDU 4 - Speed control, D/ two step 400 V Transformer S-DT2 SKT - S-DT2 SKT - Wiring diagram p A B C D E øg H J KBT , KBT , KBT
5 WSD p. 488 ASF/KB p. 489 WBK p. 489 ALS/KBT p. 489 KBT 200DV = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,29 m 3 /s, P s = 280 Pa KBT 225E4 L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,49 m 3 /s, P s = 285 Pa S-DT2 SKT p. 463 REV p. 463 S-ET p. 464 STDT p. 464 REU p. 454 = Star connection; low speed KBT 225DV L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,37 m 3 /s, P s = 382 Pa KBT 250E4 Min. static back pressure: 180 Pa L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,56 m 3 /s, P s = 500 Pa RTRE p. 454 RTRDU/RTRD p
6 KBT Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBT fans have impellers manufactured from galvanised sheet steel with forward-curved blades. The casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBT fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame. To protect the motors from overheating the KBT fans have integral thermal contacts with external leads for connection to a motor protection device. KBT 250DV KBT 280DV Voltage/Frequency V/50 Hz Phase ~ 3 3 Power at shaft W Current A 4,3 5,8 Maximum air flow m 3 /s (m 3 /h) 1,11 (4000) 1,22 (4400) R.p.m. min Max. temp of transported air C Max. temp of transported air when speed-controlled C Sound pressure level at 4/10 m db(a) 45/37 48/40 Weight kg Insulation class F F Enclosure class IP 54 IP 54 Capacitor μf - - Motor protection STDT 16 STDT 16 Speed control, five step Transformer RTRD 7 RTRD 7 Speed control, five step high/low Transformer RTRDU 7 RTRDU 7 Speed control, D/ two step 400 V Transformer S-DT2 SKT S-DT2 SKT Wiring diagram p A B C D E øg H J KBT KBT
7 WSD p. 488 ASF/KB p. 489 WBK p. 489 ALS/KBT p. 489 KBT 250DV = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,67 m 3 /s, P s = 400 Pa KBT 280DV = Star connection; low speed Min. static back pressure: 240 Pa L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,60 m 3 /s, P s = 630 Pa S-DT2 SKT p. 463 REV p. 463 S-ET p. 464 STDT p. 464 REU p. 454 RTRE p. 454 RTRDU/RTRD p
8 KBR 280 Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBR fans have impellers manufactured from galvanized steel with backward-curved blades and external rotor motors. The KBR casing is manufactured from doubleskinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBR fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame. To protect the motors from overheating the KBR fans have integral thermal contacts with external leads for connection to a motor protection device. KBR 280D2 KBR 280D2-4 KBR 280DV Voltage/Frequency V/50 Hz Phase ~ Power at shaft *) W / Current A 2,2 1,2/0,33 1,39 Maximum air flow m 3 /s (m 3 /h) 0,8 (2900) 0,8 (2900)/0,42 (1520) 0,42 (1520) R.p.m. min / Max. air speed on outlet m/s 13,5 13,5/7,2 7,2 Max. temp of transported air C Max. temp of transported air when speed-controlled C Sound pressure level at 4/10 m db(a) 44/36 44/36-33/25 33/25 Weight kg Insulation class F F F Enclosure class IP 55 IP 55 IP 54 Motor protection - - STDT 16 Speed control, five step Transformer - - RTRD 2 Speed control, five step high/low Transformer - - RTRDU 2 Speed control, D/ two step 400 V Transformer - - S-DT2 SKT Wiring diagram p *) Shaft radiated power IEC standard engine To guarantee the function of the installation without any problems, we advise to rate the fan in that way that the flow speed on the outlet don t rise above 10 m/s. A B C D E øg H I J L KBR , ,
9 KBR 280D2 300 KBR 280DV WSD p pol ASF/KB p pol WBK p ,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0, ,1 0,2 0,3 0,4 0,5 0, KBR 280D2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,42 m 3 /s, P s = 800 Pa KBR 280DV Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,02 m 3 /s, P s = 220 Pa ALS/KBT p. 489 S-DT2 SKT p. 463 REV p. 463 STDT p. 464 RTRDU/RTRD p
10 KBR 315DV-355E4 Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBR fans have impellers manufactured from aluminium with backward-curved blades. The KBR casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBR fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame. To protect the motors from overheating the KBR fans have integral thermal contacts with external leads for connection to a motor protection device. KBR 315DV KBR 315DZ KBR 355E4 KBR 355E4/K Voltage/Frequency V/50 Hz Phase ~ Power at shaft *) W Current A 1,39 3,40 2,10 2,10 Air flow m 3 /s (m 3 /h) 0,61 (2200) 1,10 (3950) 0,97 (3500) 0,78 (2800) Max. air speed at outlet m/s 7,8 14,1 9,8 7,9 R.p.m. min Max. temp of transported air C Max. temp of transported air when speed-controlled C Sound pressure level at 4/10 m db(a) 36/28 51/43 44/33 42/31 Weight kg Insulation class F F F F Enclosure class IP 54 IP 54 IP 54 IP 54 Capacitor μf Motor protection STDT 16 STDT 16 S-ET 10 S-ET 10 Speed control, five step Transformer RTRD 2 RTRD 4 RTRE 3 RTRE 3 Speed control, five step high/low Transformer RTRDU 2 RTRDU 4 REU 3 + S-ET 10 REU 3 + S-ET 10 Speed control, D/ two step 400V S-DT2 SKT S-DT2 SKT - - Wiring diagram p *) Shaft radiated power IEC standard engine To guarantee the function of the installation without any problems, we advise to rate the fan in that way that the flow speed on the outlet don t rise above 10 m/s. A B C D E øg H I J L KBR , , KBR , ,
11 WSD p. 488 ASF/KB p. 489 WBK p. 489 ALS/KBT p. 489 KBR 315DV = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,38 m 3 /s, P s = 250 Pa KBR 315DZ = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,46 m 3 /s, P s = 1276 Pa S-DT2 SKT p. 463 REV p. 463 S-ET p. 464 STDT p. 464 REU p. 454 KBR 355E4 L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,42 m 3 /s, P s = 465 Pa KBR 355E4/K L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,42 m 3 /s, P s = 320 Pa RTRE p. 454 RTRDU/RTRD p
12 KBR 355DV-DZ Max temperature of transported air 120 C Speed-controllable Integral thermal contacts Low sound level The KBR fans have impellers manufactured from aluminium with backward-curved blades and external rotor motors. The KBR casing is manufactured from double-skinned galvanised sheet steel and is insulated with 50 mm mineral wool. The KBR fans have a swing-out door for easy inspection and service. The direction of the door opening can easily be changed from left to right at site. The fan is isolated from the casing via connectors and anti-vibration dampers are incorporated into the base frame. To protect the motors from overheating the KBR fans have integral thermal contacts with external leads for connection to a motor protection device. KBR 355DV KBR 355DV/K KBR 355DZ KBR 355DZ/K Voltage/Frequency V/50 Hz Phase ~ Power at shaft *) W Current A 1,39 1,39 6,5 5,00 Air flow m 3 /s (m 3 /h) 1,06 (3800) 0,81 (2900) 1,97 (7100) 1,53 (5500) Max. air speed at outlet m/s 10,7 8,2 19,9 15,5 R.p.m. min Max. temp of transported air C Max. temp of transported air when speed-controlled C Sound pressure level at 4/10 m db(a) 41/33 41/33 54/46 54/46 Weight kg Insulation class F F F F Enclosure class IP 54 IP 54 IP54 IP54 Motor protection STDT 16 STDT 16 STDT 16 STDT 16 Speed control, five step Transformer RTRD 2 RTRD 2 RTRD 7 RTRD 7 Speed control, five step high/low Transformer RTRDU 2 RTRDU 2 RTRDU 7 RTRDU 7 Speed control, D/ two step 400 V Transformer S-DT2 SKT S-DT2 SKT S-DT2 SKT S-DT2 SKT Wiring diagram p *) Shaft radiated power IEC standard engine To guarantee the function of the installation without any problems, we advise to rate the fan in that way that the flow speed on the outlet don t rise above 10 m/s. 174
13 WSD p. 488 ASF/KB p. 489 WBK p. 489 ALS/KBT p. 489 KBR 355DV = Star connection; low speed Mid-frequency band, H L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,69 m 3 /s, P s = 320 Pa = Star connection; low speed KBR 355DV/K Mid-frequency band, H L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,32 m 3 /s, P s = 398 Pa S-DT2 SKT p. 463 REV p. 463 KBR 355DZ = Star connection; low speed L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,83 m 3 /s, P s = 1800 Pa = Star connection; low speed KBR 355DZ/K L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,72 m 3 /s, P s = 1431 Pa STDT p. 464 RTRDU/RTRD p
14 MUB DV-K2-500DV-K2 Motor outside of the air stream Speed-controllable Modular system Integral thermal contacts Low sound level Maintenance-free and reliable All MUB-K2 fans have impellers with backward curved blades, manufactured from aluminium, and IEC standard motors, which can be speed controlled by transformer, except size 630-D4. Motors are outside the air stream. The casing consists of an aluminium frame with fiberglass reinforced plastic corners and double skin, galvanised steel panels with a 20 mm mineral wool insulation. Panels are removable, allowing flexible ventilation solutions. With quick-lock access door. The MUB casing is equipped with a grease tray under the impeller and a protection guard at the motor side. An isolator switch is mounted on the casing. All MUB-K2 motors (except 630D4) are D/ connected for two speed operation. Motor protection by thermal contacts, to be connected to an external motor protection device. Standard execution, seen in airflow direction: service door left, top outlet. The MUB-K2 fans are delivered to 90 air direction airflow. MUB DV-K2 450DV-K2 500DV-K2 Voltage/Frequency V/50 Hz Phase ~ Power at shaft W Current A 1,40 2,50 4,3 Maximum air flow m 3 /h R.p.m. min Max. temp. of transported air C Max. ambient temp. C Sound pressure level at 3 m * db(a) Weight kg Insulation class, motor F F F Enclosure class, motor IP 54 IP 54 IP 54 Motor protection STDT 16 STDT 16 STDT 16 Speed control, five-step Transformer RTRD 2 RTRD 4 RTRD 7 Speed control, five-step high/low Transformer RTRDU 2 RTRDU 4 RTRDU 7 Speed control, D/ two step 400V S-DT2 SKT S-DT2 SKT S-DT2 SKT Wiring diagram p * According to 20 m 2 Sabine A B C ød øe F MUB MUB MUB
15 FGV p. 488 SRKG p. 488 UGS p. 488 MUB DV-K2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 0,56 m 3 /s, P s = 323 Pa MUB DV-K2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) LwA SurroundingdB(A) Measuring point: q v = 0,81 m 3 /s, P s = 325 Pa STDT p. 464 RTRD p. 455 MUB DV-K2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 1,40 m 3 /s, P s = 434 Pa RTRDU p. 455 S-DT2SKT p
16 MUB DV-K2-630D4-K2 Motor outside of the air stream Speed-controllable Modular system Integral thermal contacts Low sound level Maintenance-free and reliable All MUB-K2 fans have impellers with backward curved blades, manufactured from aluminium, and IEC standard motor, which can be speed controlled using frequency controller. Motors are outside the air stream. The casing consists of an aluminium frame with fiberglass reinforced plastic corners and double skin, galvanised steel panels with a 20 mm mineral wool insulation. Panels are removable, allowing flexible ventilation solutions. With quick-lock access door. The MUB casing is equipped with a grease tray under the impeller and a protection guard at the motor side. An isolator switch is mounted on the casing. Motor protection by thermal contacts, to be connected to an external motor protection device. Standard execution, seen in airflow direction: service door left, top outlet. The MUB-K2 fans are delivered to 90 air direction airflow. MUB DV-K2 630D4-K2 Voltage/Frequency V/50 Hz Phase ~ 3 3 Power at shaft W Current A 5,8 9,5 Maximum air flow m 3 /h R.p.m. min Max. temp. of transported air C Max. ambient temperature C Sound pressure level at 3 m * db(a) Weight kg Insulation class, motor F F Enclosure class, motor IP 54 IP 54 Motor protection STDT 16 STDT 16 Speed control, five-step Transformer RTRD 7 - Speed control, five-step high/low Transformer RTRDU 7 - Speed control, D/ two step 400V S-DT2 SKT - Wiring diagram p * According to 20 m 2 Sabine A B C ød øe F MUB MUB
17 FGV p. 488 SRKG p. 488 UGS p. 488 MUB DV-K2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 2,25 m 3 /s, P s = 565 Pa MUB D4-K2 Hz Tot k 2k 4k 8k L wa Inlet db(a) L wa Outlet db(a) L wa Surrounding db(a) Measuring point: q v = 1,95 m 3 /s, P s = 911 Pa STDT p
High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable
KD High efficiency low noise Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable Electrical accessories S-ET p. 341 The KD series have external rotor
More informationSingle-inlet centrifugal fans
CE 200-280 4-pole Speed-controllable Integral thermal contacts Can be installed in any position Maintenance-free and reliable CE fans are easy to install. Fans in this series have impellers with forward-curved
More informationKV sileo 100 M. Circular duct fans. Circular duct fans
KV sileo 100 M Speed-controllable Integral thermal contacts Can be installed in any position Can be installed outdoors Maintenance-free and reliable Electrical accessories RE p. 20 The K series is designed
More informationCategory 1 (zone 0) covers areas, where there is a permanent or long lasting occurrence
Explosion proof fans General Systemair explosion proof fans have been developed to be used in effective supply and exhaust air systems allocated to category 2 (zone 1) and category 3 (zone 2) in explosion
More informationMax. airflow m 3 /s Diam. min. Diam. max
Axial Fans Max. airflow m 3 /s Diam. min Diam. max 1% adjustable motor Assembly, any position Reversible (3% Reduction) Page Number AW AR AW.97 2 3 * * 13 AR.97 2 3 * * 134 ZSP 2.9 315 5 * * 13 ZAP 13.89
More informationSeries VENTS KSK. Centrifugal kitchen fan in sound-insulated casing with air flow up to 8138 m 3 /h
SOUND-INSULATED KITCHEN FAN Series device. The impeller is mounted on the motor shaft and is balanced statically and dynamically. The motor has F class motor winding insulation and ingress protection rating.
More informationKF T120. Kitchen fans. Wentylatory kuchenne KITCHEN FANS
KF T120 Kitchen fans Wentylatory kuchenne Kitchen exhaust units are used for installation where the air is slightly greasy or the air temperature is up to 120 C. Unit has a swing-out door for easy inspection
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationSquare Duct Fans - ESTOC Range. Estoc Features. Electrical Supply. Product Code. Sizes 355, 400, 450, 500, 560, 630 and 710.
Square Duct Fans - ESTOC Range Features Sizes from 355 to 71 mm diameter Air flow 1,9 m 3 /h (5.2 m 3 /s) Static pressures up to 115 Pa Maximum temperature from +4 C to +7` C (depending on the model) Adjustable
More informationVKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
VKAP 3. Features Power supply Temperature range Diameter - 1 mm to 315 mm; Airflow up to 137 m 3 /h; Easily mounted in any position; Backward-curved impeller; Low ambient temperatures; Cost-effective.
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationDevice can only be used indoors. Not suitable for polluted air or volatile and explosive gases. Single phase speed controller.
VKS VKSA Features Power supply Temperature range 400x200 mm to 1000x500 mm flanges; Airflow up to 9200 m 3 /h; Can be mounted on floors, walls or ceilings; Forward-curved galvanized steel impeller; Cost-effective;
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationVKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,
More informationROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
More informationDevice can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases.
VSV VSVI Features Power supply Temperature range Sizes Construction Installation Speed control options 9 sizes; Airflow up to 5300 m 3 /h; Vertical exhaust; Backward-curved plastic or galvanized steel
More informationCircular Duct Fan prioair
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Circular Duct Fan prioair More performance. Less energy consumption. The new EC circular duct
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More information400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationAxial-flow Fan AFC. Model numbering system AF C / T. Accessories Three phase. Power rate 1.
xial-flow Fan FC Construction xial fan designed for installation in a ducted system. Casing of rolled and electro-welded steel sheet, powder coated RL5. Impeller in polypropylene. Casing in acid-proof
More informationDevice can be connected to pull air directly from ventilated room or air duct system. Not suitable for polluted air or volatile and explosive gases.
VSA 3. ROOF FAS Features Power supply Temperature range 4 sizes; Airflow up to 117 m 3 /h; Horizontal exhaust; Backward-curved impeller; ost-effective. 23V/5Hz/1f. From -4 up to 4/65. Sizes 19 S, 19, 22
More informationROOFMASTER STEF-ATEX ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationBACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
More informationGV In Line Circular Duct Fan Circular Ducting High/Low Speed Performance
GV In Line Circular Duct Fan Circular Ducting High/Low Speed Performance GENERAL VENTILATOR A quality product suitable for general residential application. proprietary made and compact design fan is designed
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationIn-Line Fans. Roof Fans. Fans ATEX. Centrifugal Fans. Chip Extractors. Domestic Fans. Accessories. Electric Diagrams. General Information.
In-Line Fans xial-flow Fans Wall Versions xial-flow Fans Cased Versions Roof Fans Fans TEX Centrifugal Fans VISP/VSP Centrifugal Fans Side Channel lowers Chip Extractors COMPCT 44 TCx, TCTx FC 54 FC-V
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationTube Fans - ROPERA Range ROPERA 100 (L) Features. Electrical Supply. Product Code. Sizes 100, 125, 150, 160, 200, 250, 315 and 355.
Tube Fans - ROPERA Range Features 1 mm to 355 mm diameter Air flow 234 m 3 /h (.65 m 3 /s) Static pressures up to 92 Pa Casing - galvanized sheet steel Backward curved impeller Easy electrical connection
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationCSXRT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJSXR: Ventilation units with a backward-curved impeller
CSXR CSXRT CJSXR CSXR: Belt-driven single inlet centrifugal fans with shaft outlet and backward-curved impeller CSXRT: Belt-driven single inlet centrifugal fans fitted with electric motors, a set of pulleys
More informationhore PRODUCT CATALOGUE nd Offsh arine an ms for Ma & Refrig CENTRIFUGAL FANS HV VAC &
hore nd Offsh arine an ms for Ma geration System & Refrig HV VAC & PRODUCT CATALOGUE CENTRIFUGAL FANS ! "# $ % & " ' (! ) * +,+( -../01..2 PRODUCT CATALOGUE 73-16 CENTRIFUGAL FANS CONTENT PAGE 1. CENTRIFUGAL
More informationROOFMASTER STEF ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF...3 Performance Data...4 Performance Table...6 General description...8 Fan Chart-explanation and
More informationSquare Duct Fans - ESTOC TARGE Range. Estoc Targe Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630.
Square Duct Fans - ESTOC TARGE Range Features Sizes from 55 to 6 mm diameter Air flow 21, m /h (5.8 m /s) Static pressures up to 145 Pa Maximum temperature up to 11 C Controllable external rotor motors
More informationAC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
More informationCircular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000.
Circular Box Fans - DAISHO EC Range Features 125mm to 1mm Air flow 1,25 m 3 /h (3.5m 3 /s) Static pressures up to 125 Pa Maximum temperature range 6ºC Suitable for variable or constant pressure systems
More informationIntegreret Combi Cooler system Energieffektiv ventilation og køling. FCUA Fancoil
Integreret Combi Cooler system Energieffektiv ventilation og køling FCUA Fancoil DESCRIPTION The FCU(A,F) fan coil unit is a highperformance, cost-effective and compact solution for the cooling of technical
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationDuct Fans - ESTOC EC Range. Estoc EC Features. Electrical Supply. Sizes 355, 400, 450, 500, 560 and 630. Product Code
Tubes and ox Fans Duct Fans - ESTOC EC Range Features Sizes from 55 to 6 mm diameter ir flow 19, m /h (4. m /s) Static pressures up to 84 Pa Maximum temperature up to 6 C Controllable external rotor motors
More informationVENTS KSB K2. Series. Inline centrifugal fans in heat- and sound-insulated casing with air flow up to 7000 m 3 /h SOUND-INSULATED FANS
SOUND-INSULATED FANS Series Inline centrifugal fans in heat- and sound-insulated casing with air flow up to 7 m 3 /h Purpose KSB fan design allows to use them in supply and exhaust ventilation systems
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationMixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 P65 service isolator Guard
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationRoof Extract Fans DV Ventilation Hoods DLH Smoke Extract Fans ER
Roof Extract Fans DV Ventilation Hoods DLH Smoke Extract Fans ER Roof Extract Fans Ventilation Hoods Smoke Extract Fans DV DLH ER Summary... Seite Roof Extract Fans DV Product review... Summary data sheet...
More informationCK, LPK, LPKB. Duct fans with circular connection.
CK, LPK, LPKB Duct fans with circular connection 1 www.ostberg.com Contents CK CIRCULAR DUCT FAN............5 CK 100 A/C 230 V/50 Hz........6 CK 125 A/C 230 V/50 Hz........6 CK 150 B/C 230 V/50 Hz........7
More informationIn-line rectangular fans. Technical Catalogue
In-line rectangular fans Technical Catalogue Overview IN-LINE RECTANGULAR FANS IRB / IRBS IRB and IRBS are a compact series of centrifugal type exhaust and supply in-line duct fans for air conditioning
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationIN-LINE RECTANGULAR FANS IRB / IRBS IRB
IN-LINE RECTANGULAR FANS IRB / IRBS IRB IN-LINE RECTANGULAR FANS IRB / IRBS IRB and IRBS are a compact series of centrifugal type exhaust and supply in-line duct fans for air conditioning systems. They
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationCRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationROOF FAN ROOFMASTER STEC
AIR COMFORT AIR MOVEMENT ROOF FANS ROOF FAN ROOFMASTER STEC INSULATED VERSION» TECHNICAL CATALOGUE 2 STEC Roofmaster - Technical Catalogue CONTENTS GENERAL DESCRIPTION Application/specification... 3 Features...
More informationTube Fans - ESPADA Range ESPADA 100 (L) Features. Electrical Supply. Product Code. Sizes 100, 125, 150, 160, 200, 250 and 315
Tube Fans - ESPADA Range Features mm to 315 mm diameter Air flow 18 m 3 /h (.5 m 3 /s) Static pressures up to 72 Pa Plastic cased centriugal fan Low noise levels Completely corrosion resistant Easy electrical
More informationMAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationExplanation of AR Series Ventilator Products. Fan type code D S AR AE
Series Axial Fan Explanation of Series Ventilator Products Fan type code 450-7 /26 D -2 F400 Smoke Extract Fan 400 C, 300 C Number of Poles D S Three Phase Single Phase AE AE Features and construction
More informationTSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors. CJTSA: Ventilation units with a forward-curved impeller.
TSA TSAT CJTSA TSA: Single inlet, belt-driven centrifugal fans with shaft outlet and forward-curved impeller. TSAT: Single inlet, belt-driven centrifugal fans fitted with electric motors, a set of pulleys
More information1 AIR HANDLING UNIT TYPE AIR ACCESS 75
SUPPLY 1 AIR HANDLING UNIT TYPE AIR ACCESS 75 Location : EXTERNAL Position : SIDE BY SIDE SLIDING PANELS for COMPLETE ACCESSIBILITY MULTI SERVICE BULKHEAD for HYDRAULIC AND ELECTRICAL CONNECTIONS Self-supporting
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalouge
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalouge air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalouge Contents GENERAL Description and survey chart Application... 3 General Survey
More informationCONTENTS. Page. Adjustable Axial Pitch Flow Fans 3. Dimensions 4. AP056 Performance Curves 5. AP056 Sound Performance 6. AP063 Performance Curves 7
CONTENTS Page Adjustable Axial Pitch Flow Fans 3 Dimensions 4 AP056 Performance Curves 5 AP056 Sound Performance 6 AP063 Performance Curves 7 AP063 Sound Performance 8 AP071Performance Curves 9 AP071 Sound
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationPerformance. Sound Levels. Impellers. Motors. Accessories
EuroSeries (ESP) Die cast aluminium impellers Fully speed controllable Air Volumes up to 13.89m 3 /s Sizes 250 to 1000 dia protected to IP54 Operating Temperatures from -40 C up to +70 C Insulation Class
More informationUnobox units with backward curved centrifugal impellers
Unobox Fans Unobox units with backward curved centrifugal impellers Type Code UNO 67-450 -4 E W Unobox Box size 50=500mm ; 67=670mm 80=800mm ; 102=1020mm Impeller diameter Number of poles D - Three Phase
More informationKUB T120. Kitchen fans. Caisson de ventilation. Küchenabluftboxen. Extractor de cocina KITCHEN FANS
Kitchen fans Caisson de ventilation Küchenabluftboxen Extractor de cocina Kitchen exhaust units are used for installation where the air is slightly greasy or the air temperature is up to 120 C. Typical
More informationCENTRIFLOW 3D WITH AC MOTOR >> Technical catalogue
CENTRIFLOW 3D plug fan WITH AC MOTOR >> Technical catalogue air comfort Centriflow 3D 2 GMEB CentriFlow 3D - Technical Catalogue Contents GENERAL Description and survey chart Application... 3 General Survey
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationMultifunctional roof fans for large flows. Multifunctional roof fans, highly robust construction, for large flows
HTMH Multifunctional roof fans for large flows Multifunctional roof fans, highly robust construction, for large flows Fan: Painted galvanised sheet steel base plate Turnable impellers cast aluminium. Protection
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationDVAX-ARS. Roof-mounted unit for mechanical smoke extract
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans DVAX- Roof-mounted unit for mechanical smoke extract 2 DVAX DVAX- Roof-mounted axial fan unit
More informationHeat recovery units type GTDHR
GTDHR Double flux - 4 m3/h AC 23V type GTDHR Double flux heat recovery unit high efficiency 9%. The range consists of 5 sizes and 6 types for air flow from up to 4 m³/h. Application Ventilation and heat
More informationINDEX. SUPER VENT By Beta Industrial. pages INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART DIMENSION SHEET - SINGLE CABINET FANS
Cabinet Fan SV-1 INDEX INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART pages 01 02 03 04 DIMENSION SHEET - SINGLE CABINET FANS DIMENSION SHEET - TWIN CABINET FANS PERFORMANCE GRAPH WIRING
More informationSabre Plate Mounted Sickle Fans (VSP)
Sabre Plate Mounted Sickle Fans (VSP) Swept impeller with Aerofoil blades, winglets and serrated trailing edge for optimum performance One shot die cast impeller, dynamically balanced for smoother operation
More informationEco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors
Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air. for wall mounting.
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 11900 m 3 /h for wall mounting. Low pressure axial fans in the steel casing
More informationV.I.R.T.U.O. Ventilation boxes. Comfort ventilation boxes
Comfort ventilation Very wide flow rate range : 0.11 to 9.72 m 3 /s Standard version with lacquered finish casing APPLICATION ventilation are designed for the ventilation of tertiary or industrial buildings,
More informationCONFIGURABLE HIGH-EFFICIENCY HEAT RECOVERY UNITS CADB/T-HE PRO-REG Series
False-ceiling models CADB/T-HE 4 to 33 Heat Recovery Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised
More informationMIRUVENT. Power roof ventilator with 27 different airflow variants up to 24,000 m 3 /h
MIRUENT Power roof ventilator with 27 different airflow variants up to 24, m 3 /h General MIRUENT is a power roof ventilator with a casing made of corrosion-resistant aluminium The power roof ventilator
More informationAxial fans 400ºC/2h and 300ºC/2h With soundproofed box. Extraction units with axial fans to work inside fire danger zones.
CJTHT Axial fans 400ºC/2h and 300ºC/2h With soundproofed box Extraction units with axial fans to work inside fire danger zones. Fan: Sheet steel long casing fan. Galvanised sheet steel structure with thermal
More informationDynamically-balanced impellers with extremely robust cores CMP T 5.5
Medium pressure, single inlet centrifugal fans with sheet steel casing and impeller Fan: Sheet steel casing. Forward-curved impeller made of galvanised sheet steel. 38-2M model casing in cast aluminium.
More informationHison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
More informationUltra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
More informationAccessories. Controllers / Sensors. Duct Heaters / Cooling Coils
Duct Heaters / Cooling Coils Filter boxes / Filters Fan to Duct Fittings / Misc CB FGR PRK REP VBC FFR WSD RET CWK FFK WSD KBT DSG RB FFS WBK DTV RBM EAAF ALS-KBT ETFV VBR EAPF SMF RS Controllers / Sensors
More informationDTV, DTH and VVR Roof- and wall fans DTV Roof fan DTH Roof fan VVR Wall fan
Product information - Version 3 DTV, DTH and VVR Roof- and wall fans DTV Roof fan DTH Roof fan VVR Wall fan Overskrift placering Table of contents Choice of motor... 4 DTV roof fans... 5 - Technical specifications
More informationHison Axial Flow Fans
Hison Axial Flow Fans Introduction Hison Marine Axial Flow Fans, formerly know as Howden Fans are manufactured to international Quality Standard. Axial flow fans are available from sizes 35mm to 18mm diameter,
More informationBSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS
SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS BSB 03.06-01 BSB SINGLE INLET BELT DRIVEN CENTRIFUGAL FANS WITH BACKWARD CURVED IMPELLERS Description Construction Fans are not
More informationSeries VENTS OVK. Low pressure axial fans in the steel casing with the air capacity up to m 3 /h for wall mounting
AXIAL FANS Series VENTS OV Series VENTS OVK Series VENTS Low pressure axial fans in the steel casing with the air capacity up to 122 m 3 /h for wall mounting Low pressure axial fans in the steel casing
More informationMultifunctional 400ºC/2h and 300ºC/2h roof fans
HTMF Multifunctional 400ºC/2h and 300ºC/2h roof fans Multifunctional 400ºC/2h ceiling fans to work inside fire danger zones, designed for smoke extraction in industrial or similar buildings. 0370-CPR-0544
More informationHIGH TEMPERATURE TWIN SQUIF FANS
HIGH TEMPERATURE FANS HIGH TEMPERATURE FOR SMOKE EXTRACT CERTIFIED TO EN12101-3-2002. 374 029 2085 8200 BENEFITS QUIET AND POWERFUL SOLUTIONS High performance centrifugal motor/impeller combination providing
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationKitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents General description...3 Quick selection...5 Design description...5 Material and design...6 Fan impeller...6 Motor...6...6 Quality...6 Specification...6 Technical data
More informationSentinel D-Box Twin Fan
Sentinel D-Box Twin Fan Duct Sizes mm Performance - Airflow.1 to 1.3m 3 /s, Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Latest energy saving EC/DC motors Aluzinc
More informationCYCLONE F 400 smoke extraction casing
Fire protection CYCLONE F smoke extraction casing Presentation of the CYCLONE F range (12) WHY CHOOSE A CYCLONE F? In order to fulfil the requirements of the CE markings (EN 1211-3 and the French governmental
More informationVent-Axia Sabre Sickle Roof Fans (VSR)
Vent-Axia Sabre Sickle Roof Fans (VSR) Features and Benefits High performance roof sickle fan Fully assembled cowl. Optional backdraught shutters and birdguard Moulded from recyclable polymeric material,
More information