PROFIRE V SERIES TECHNICAL DATA INFORMATION PACKET

Size: px

Start display at page:

Download "PROFIRE V SERIES TECHNICAL DATA INFORMATION PACKET"

Cathleen Mathews
6 years ago
Views:

1 PROFIRE V SERIES TEHNIA DATA INFORMATION PAKET

2 Technical Data Uncontrolled Emissions onfiguration (VG, V, VG) MM BTU/H NG; GPH #2 OI U listed with choice of NFPA, SD-1, GAP, and FM for U.S. or anadian units Standard equipment: 3450 RPM motor, panel signal lights (Power On, Main Fuel, Ignition, Flame Failure), combustion air proving switch, safety shutoff valves, 120/1/60 control circuit, burner mounted panel with standard or inverted configuration, and a shipped loose gas train (where applicable). ombustion ontrol System options: Parallel Positioning ombustion ontrol System with O 2 Trim and Variable Frequency Drive (VFD) Fuel options: Main Fuel: Natural gas (VG), #2 oil - pressure atomized (V) or ombination gas/ #2 oil - pressure atomized (VG). Igniter Fuel: Natural gas and/or propane. Fuel hangeover Switch: ombination gas/oil units only (VG). Series Features Optional Feature Flame Safeguard imited Damper Purge ontrol with UV Scanner Open Damper Purge ontrol with UV Scanner Turndown Up to 10:1 on Natural Gas Mode of Operation On-Off Firing ow-high-off Firing ow-high-ow Firing Full Modulation Firing Auto-Manual Firing Rate ontrol Ignition Gas/Electric Pilot and Ignition Transformer (VG/VG) Dual Ignition (VG) Direct Spark (V) Oil omponents Directly Driven Oil Pump Set Separately Driven Oil Pump Set Simplex Oil Nozzle Return Flow Oil Nozzle Gas omponents Butterfly Rate ontrol Valve 5 High & ow Gas Pressure Interlocks Gas Shutoff ocks (2) V-13 to V-25 V-30 to V-34 1 DP (60% air above 2,500-6,300 MBH). <2,500 MBH, purge is at low-fire damper setting 2 High turndown on gas requires the Siemens SQM mod motor or a parallel positioning system (VG burners only) 3 Standard for full modulation; optional on select parallel positioning systems 4 Optional for V models Standard for low-high or full modulation V-35 to V-40 V-42 to V-55 V-60 to V-63 V-70 to V-100 V-105 to V-168 2

3 Standard Ratings VG - V - VG: Gas, #2 Oil, Gas/Oil onfiguration Gas Input MBH Oil Input GPH 80% Eff. Blower Motor HP 1 Blower Motor HP 2 Remote Oil Pump Motor HP 3 Furnace Pressure ("w.c.) Standard Gas Train Pipe Size (in.) Min. Gas Pressure ("w.c. ) 6 Model No. & Frame Size V , /2 3/4 1/ /9.2 5 V /2 3/4 1/ / V /2 3/4 1/ / V , /4 1 1/ / V , /4 1 1/ / V , /4 1 1/ /2 9.6/ V , /4 1 1/ V , /4 1 1/ V , /2 1/ V , /2 1/ V , / / V , / V , / V , / V , / V , / V , / V , / / V , / V , / / V , /2-1 1/ / V , / / V , / / V , / / V , / / V , / V , / PSI V , / PSI 1 Motor ratings for gas only or gas/oil burners using a remote oil pump 2 Motor ratings for oil only and gas/oil burners using a direct drive oil pump 3 Remote oil pump is optional for frame size 1 and 2 but standard for frame sizes 3 and 4. All pump motors are 115/230/ /2 HP blower motor voltage is 115/230/1 5 ow/high and Full Modulation minimum gas pressure 115 / 230 / / 230 / 460 / / 3 Input is based on fuel BTU content, listed furnace pressure and altitude of 2,000 feet or less. If altitude > 2,000 feet and < 8,000 feet, derate capacity 4% per 1,000 feet over 2,000. onsult factory for higher altitudes. If furnance pressure exceeds listed value, derate capacity 5% for every 0.5" w.c. of pressure in excess of stated. onsult factory if derate exceeds 20%. Gas input is based on natural gas with 1,000 BTU/ cu.ft. and 0.60 gravity. For total pressure at manifold, add furnace pressure. Oil input based on 140,000 BTU/gal. onsult factory for 50 Hz. applications. 3

4 Standard Dimensions VG - V - VG: Gas, #2 Oil, Gas/Oil onfiguration A 3/4" 4" A H DIA 4X 3/4 I B.. J R G D Q P K D G E Q H DIA N ombination Gas/Oil M S N 4X Ø3/4 I B.. ombination EGas/Oil Standard onfiguration Inverted onfiguration Burner Frame Size Boiler HP DIM Size 1 Size 2 Size 3 Size 4 ength in inches Overall length A 37 1/4 40 3/8 45 1/4 51 1/8 Width in inches enter line to right side (Standard) M /8 16 7/8 21 7/8 enter line to left side (Standard) N 12 7/ /8 15 1/4 15 1/4 enter line to right side (Inverted) N 12 7/ /8 15 1/4 15 1/4 enter line to left side (Inverted) S /8 16 7/8 21 7/8 Height in inches enter line to top (Standard) J 9 1/2 9 1/8 8 3/8 9 3/4 enter line to bottom (Standard) K 11 3/4 14 7/ /8 19 1/4 enter line to burner support (Standard) P 11 3/4 14 7/ /8 19 1/4 enter line to top (Inverted) R /8 34 3/4 35 1/2 enter line to center line of main gas inlet (Inverted) Q 6 7/8 8 7/8 10 1/8 11 3/4 Blast tube dimensions in inches Extension (Standard) STD Extension (Maximum) MAX Diameter D STD 8 1/ /2 13 5/8 Panel box depth in inches Panel box depth G 7 3/8 7 3/8 7 3/8 7 3/8 Mounting flange dimensions in inches Diameter H 12 7/ /4 17 1/2 Bolt circle diameter I 11 1/4 13 1/4 15 1/4 15 3/8 Gas inlet measurement in inches enter line to main gas inlet 9 5/8 9 5/8 10 1/2 11 Mounting flange to main gas inlet E 6 7/8 7 1/4 7 5/8 9 1/2 Accompanying dimensions, while sufficiently accurate for layout purposes, must be confirmed for construction. 4

5 Technical Data <30 PPM ow NOx onfiguration (NV, NVG) MM BTU/H NG: GPH #2 OI U listed with choice of NFPA, SD-1, GAP, and FM for U.S. or anadian units Standard equipment: 3450 RPM motor, panel signal lights (Power On, Main Fuel, Ignition, Flame Failure), FGR, combustion air proving switch, safety shutoff valves, 120/1/60 control circuit, burner mounted panel with standard or inverted configuration, and a shipped loose gas train (where applicable). ombustion ontrol System options: Parallel Positioning ombustion ontrol System with O 2 Trim and Variable Frequency Drive (VFD) Fuel options: Main Fuel: Natural gas (NVG) or ombination gas/ #2 oil - pressure atomized (NVG). Igniter Fuel: Natural gas and/or propane. Fuel hangeover Switch: ombination gas/oil units only (NVG). Series Features Optional Feature NV-13 to NV-25 NV-30 to NV-40 NV-42 to NV-55 NV-60 to NV-63 NV-70 to NV-100 NV-105 to NV-147 Flame Safeguard Open Damper Purge ontrol with UV Scanner Turndown Up to 5:1 on Natural Gas Mode of Operation Full Modulation Firing Auto-Manual Firing Rate ontrol Ignition Gas/Electric Pilot and Ignition Transformer Dual Ignition (NVG) Oil omponents Separately Driven Oil Pump Set Simplex Oil Nozzle Return Flow Oil Nozzle Gas omponents Butterfly Rate ontrol Valve High & ow Gas Pressure Interlocks Gas Shutoff ocks (2) 1 Standard for full modulation; optional on select parallel positioning systems 5 5

6 Standard Ratings NVG - NVG: <30 PPM ow NOx - Gas, Gas/Oil onfiguration Gas Input MBH Oil Input GPH 80% Eff. Blower Motor HP Remote Oil Pump Motor HP Furnace Press. ("w.c.) Standard Gas Train Pipe Size (in.) Min. Gas Press. ("w.c.) Model No. & Frame Size NV , /4 1/ NV , /4 1/ NV , /4 1/ NV , /4 1/ NV , /4 1/ NV , /4 1/ / NV , / NV , / NV , / NV , / NV , / NV , / NV , / NV , / NV , / NV , / NV , / NV , /2 3/ / NV , /2 3/ / NV , / / NV , / NV , / / NV , / / NV , / / NV , / / NV , / NV , / PSI 6 FGR ine Piping (in.) Input is based on fuel BTU content, listed furnace pressure and altitude of 2,000 feet or less. If altitude > 2,000 feet and < 8,000 feet, derate capacity 4% per 1,000 feet over 2,000. onsult factory for higher altitudes. If furnance pressure exceeds listed value, derate capacity 5% for every 0.5" w.c. of pressure in excess of stated. onsult factory if derate exceeds 20%. Gas input is based on natural gas with 1,000 BTU/cu.ft. and 0.60 gravity. For total pressure at manifold, add furnace pressure. Oil input based on 140,000 BTU/gal. onsult factory for 50 Hz. applications. 115 / 230 / / 230 / 460 / / 3 6

7 Standard Dimensions NVG - NVG: <30 PPM ow NOx - Gas, Gas/Oil onfiguration A 3/4" 4" A W J D R X Q G P K G Y DIA E D X 8X Ø3/4 Z B.. W N ombination Gas/Oil M H DIA M N Q Y DIA 4X Ø.75 ombination I B.. E Gas/Oil 8X Ø3/4 Z B.. Standard onfiguration Inverted onfiguration Burner Frame Size Boiler HP DIM Size 1 Size 2 Size 3 Size 4 ength in inches Overall length A 37 1/4 40 3/8 45 1/4 51 1/8 Width in inches enter line to right side (Standard) M /8 16 7/8 21 7/8 enter line to left side (Standard) N 12 7/ /8 14 5/8 17 enter line to right side (Inverted) N 12 7/ /8 14 5/8 17 enter line to left side (Inverted) S /8 16 7/8 21 7/8 Height in inches enter line to top (Standard) J 9 1/2 9 1/8 8 3/8 9 3/4 enter line to bottom (Standard) K 11 3/4 14 7/ /8 19 1/4 enter line to burner support (Standard) P 11 3/4 14 7/ /8 19 1/4 enter line to top (Inverted) R /8 34 3/4 35 1/2 enter line to center line of main gas inlet (Inverted) Q 6 7/8 8 7/8 10 1/8 11 3/4 Blast tube dimensions in inches Extension (Standard) STD Extension (Maximum) MAX Diameter D STD 8 1/ /2 13 5/8 Panel box depth in inches Panel box depth G 7 3/8 7 3/8 7 3/8 7 3/8 Mounting flange dimensions in inches Diameter H 12 7/ /4 17 1/2 Bolt circle diameter I 11 1/4 13 1/4 15 1/4 15 3/8 Gas inlet measurement in inches enter line to main gas inlet 9 5/8 9 5/8 10 1/2 11 Mounting flange to main gas inlet E 6 7/8 7 1/4 7 5/8 9 1/2 Flue gas recirculation (FGR) in inches enter line of FGR to mounting flange W 20 1/4 22 1/8 25 1/2 30 1/4 enter line of burner to center line of FGR X 4 5 1/ /4 Diameter Y Bolt circle diameter Z 7 1/2 7 1/2 7 1/2 9 1/2 Accompanying dimensions, while sufficiently accurate for layout purposes, must be confirmed for construction. 7

8 Packaged Burner Systems st Street, Monroe, WI USA cleaverbrooks.com Printed in the USA 2015 leaver-brooks, Inc B /15

PROFIRE E SERIES TECHNICAL DATA INFORMATION PACKET

PROFIRE E SERIES TECHNICAL DATA INFORMATION PACKET Technical Data Uncontrolled Emissions Configuration (EG, EL, ELG) 8.4-42.0 MM BTU/H NG; 60-300 GPH #2 OIL UL listed with choice of NFPA, CSD-1, GAP, and