J I C a s e ATenneco Company

Transcription

1 J I C a s e ATenneco Company

2 r REVISION RECORD LOG REVISION DATE NO. INSERTED COMPACT TRACTORS S/N & AFTER S/N & AFTER S/N & AFTER S/N & AFTER Parts Catalog 1375 Port Publ 2500 Published February State Street Printed in U.S.A. Racine, Wisconsin 53404

3

4 CASE 220, 222, 224 AND 444 COMPACT TRACTORS TRACTOR MODEL AND., ENGINE MODEL, SERIAL AND SERIAL NUMBER SPECIFICATION NUMBER TRACTOR MODEL DESIGNATIONS ENGINE MODEL DESIGNATIONS 220 TRACTOR K-241-AS C24784 SPEC. PF46746D 222 TRACTOR K-301AS C24785 SPEC. PF47612D 224 TRACTOR K-321-AS C24786 SPEC. PF60324D 444 TRACTOR K-321-AS C24786 SPEC. PF60324D When using this catalog, notice the reference to serial numbers of various components noted here and SERIAL NUMBERS listed in the "description" copy. By referring to correct serial numbers, proper parts identification.,,.-ji/vouie assured....

5 GENERAL INFORMATION Indexes This parts Catalog is arranged for easy identification of Genuine CASE Service Parts. An alphabetical index is provided at the front of this Catalog to locate the major groups or assembl.'as. A numerical index at the rear of the Catalog gives the part numbers and the pages on which they are described. Illustrations All parts are illustrated in "Exploded Views" which show the individual parts in their normal relationship to each other. Reference numbers are used in the illustrations. These numbers correspond to those in the "Reference Number" column and are followed by the part number, description and quantity required. Orders Orders should plainly specify correct part number, full description, quantity required, machine model and engine model, machine and engine serial numbers, method of shipment and shipping address. Changes When changes to the machine make it necessary, revised pages for this book will be issued. The revised pages will be issued with the same page number as those they replace and the "issue" number and date will be advanced. It is imperative that revised Parts Book pages be inserted into their respective Parts Books as soon as received. Failure to do so will lead to confusion and defeat the purpose of the book. Indented Description Indented parts in the descriptive list are a part of the preceding assembly or sub-assembly. The quantity shown in the "Number Required" column is the number of parts used on a machine except where parts are indented in descriptive list. In this case the quantity shown is the number required for the preceding assembly or subassembly. REF. PART NO. DESCRIPTION REQ'D A CYLINDER ASSY - rear steering 1 28 A SOCKET ASSY - rear cylinder 1 29 A PLUG - adjusting, socket assy 1 30 A SEAT - socket ball 2 31 A SPRING socket ^ 32 A SEAT - socket spring 1 33 G CLAMP ASSY - socket assy BOLT - 1/2" X 2-1/4" N.F. hex PIN-cotter, 3/16" X 3" 1 35 A STUD - ball, socket & cylinder BOLT-1/4" X 5/8" N.C., hex LOCKWASHER - 1/4" SAE 4 Terms "Right Hand" and "Left Hand" "Right Hand" and "Left Hand" sides of this machine are determined by standing at the rear of the unit and facing in the direction of forward travel.

6 ALPHABETICAL INDEX 3 ENGINE SECTION Page Air Cleaner 5 5 Battery Breaker Contacts Breather, Crankcase 7 9 Camshaft 7 9 Carburetor Connecting Rod Crankshaft Cylinder Block Cylinder Head Electrical System Engine Block & Attaching Parts Exchanger, Heat Exhaust System 5 5 Fan Page Filter, Breather 7 9 Flywheel Fuel Pump Fuel Strainer Fuel System Gasket Kits Governor Muffler 5 5 Shields Oil Pan Piston PTO Clutch Sparkplug Starter Tank, Fuel Throttle Linkage Valves 7 9 BASIC TRACTOR SECTION Axle, Front 39 Axle, Rear 47 Baffles & Shrouds 25 Brakes ^3 Control-Speed 55 Decals Electrical System Fenders Frame Grille 35 Hitch 45 Hood 35 Hydraulics 49 Coupling, Pump Drive Hoses, Lines & Fittings 49 Motor, Hydraulic Drive Pump Valve, Control Valve, Control Linkage 55 Implement Lift Lever 45 Instruments 59 J17 Hydraulic PTO L7 Holding Valve 83B L9 Holding Valve 83B L11 Counterweight Kit 83B LI 9 Flow Control Valve Kit 83 L29 PTO 83D m Holding Valve 83B Models K8 & K10 Wheel Weights 67 Model H26 Three Point Hitch 71 Model F27 Three Point Hitch Adapter 73 Model J22 & J24 Sleeve Hitch 75 Model H13 Weight Box 77 Model K18 Counterweight Brackets 77 Model J30 Hydraulic Lift 59 Mounts, Engine ^9 Mounts, Heat Exchanger 57 PTO Clutch Seat, Operator's 37 Steering Wheel & Gear 41 Tail Lamp ^3 Tool Box 37 Transmission 47 Wheels, Front & Rear 43

7

8 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 5 AIR CLEANER REF. PART NO. DESCRIPTION REQ'D 1 KO AIR CLEANER ASSEMBLY 2 NSS COVER air cleaner (order K ) 3 NSS BASE - air cleaner (order K ). 4 KO GASKET - cover, air cleaner INUT - wing 1/4" N.C 6 KO GASKET - air horn 7 A ELEMENT - air cleaner SCREW - fillister head X 5/16" LOCKWASHER - ext. tooth 10 KO PRE-CLEANER EXHAUST SYSTEM 1 C MUFFLER ASSEMBLY - exhaust (includes itenns 9, 10, 13 and 14 banded together) 2 C PIPE - engine exhaust 3 NSS CLAMP ASSEMBLY - muffler (use L47766) BOLT - 5/16" X 1-1/4" round head NC LOCKWASHER 5/16" NUT - 5/16" N.C. hex BOLT - 5/16" X 5/8" socket head y ^ 8 C C C C C C GASKET - exhaust WRAPPER - muffler COVER - muffler end CLAMP - muffler and wrapper mounting BRACKET - muffler mounting INSULATION - muffler INSULATION - muffler end 15 L CLAMP - muffler NUT- 5/16" - IBhex Printed in U.S.A. August 1980

9

10 CASE 220, 222, 224 AND 444 COMPACT TRACTORS AND 222 CRANKCASE BREATHER REF. PART NO. DESCRIPTION REQ'D NUT - 1/4" NC hex LOCKWASHER - 1/4" 1 3 KO STUD - valve cover 1 4 KO COVER-valve 1 5 KO SEAL - breather 1 6 KO GASKET - breather plate 1 7 KO FILTER - breather 1 8 KO BAFFLE - breather 1 9 KO REED breather 1 10 KO PLATE - breather 1 11 KO GASKET - valve cover CAMSHAFT AND VALVES 14 KO KO KO KO S 18 KO KO KO C KOD NSS 24 NSS 25 C KO KO KO V VALVE - exhaust 1 VALVE - intake 1 INSERT - exhaust valve seat 1 GUIDE - valve 2 SEAT - valve spring 2 SPRING - valve 2 RETAINER - valve spring 2 KIT - valve retainer (includes both halves) 2 LIFTER ASSEMBLY 2 SCREW - tappet adjusting 1 LIFTER - valve 1 CAMSHAFT ASSEMBLY 1 SPACER - camshaft,.005" UAR SPACER - camshaft,.010" UAR PIN - camshaft 1 SPRING - actuating CAMSHAFT AND VALVES 37 KO KO KO KO S 41 KO KO KO C KOD NSS 47 NSS 48 C KO KO KO V VALVE - exhaust ^ VALVE - intake ^ INSERT - exhaust valve seat 1 GUIDE - valve 2 SEAT - valve spring 2 SPRING - valve 2 RETAINER - valve spring 2 KIT - valve retainer (includes both halves) 2 LIFTER ASSEMBLY 2 SCREW-tappet adjusting ^ LIFTER valve CAMSHAFT ASSEMBLY 1 SPACER - camshaft,.005" UAR SPACER - camshaft,.010" UAR PIN camshaft ^ SPRING - actuating ^ Printed in U.S.A. October 1977

11

12 CASE 220, 222, 224 AND 444 COMPACT TRACTORS AND 444 CRANKCASE BREATHER REF. PART NO. DESCRIPTION REQ'D NUT -1/4" NC hex LOCKWASHER - 1/4" 1 3 KO STUD - valve cover 1 4 KO COVER-valve 1 5 KO SEAL - breather 1 6 KO GASKET - breather plate 1 7 KO FILTER - breather 1 8 KO BAFFLE - breather 1 9 KO REED - breather 1 10 KO PLATE - breather 1 11 KO GASKET - valve cover AND 444 CAMSHAFT AND VALVES 14 KO VALVE - exhaust 1 15 KO VALVE - intake 1 16 KO INSERT - exhaust valve seat 1 17 KO S GUIDE-valve 2 18 KO SEAT - valve spring 2 19 KO SPRING-valve 2 20 KO ROTATOR - valve (Furnished in pairs only) 2 21 C KIT - valve retainer (includes both halves) 2 22 KOD LIFTER ASSEMBLY 2 23 NSS SCREW - tappet adjusting 1 24 NSS LIFTER - valve 1 25 C CAMSHAFT ASSEMBLY 1 26 V SPRING - actuating 1 27 KO SPACER - camshaft,.005" UAR 27 KO SPACER - camshaft,.010" UAR 28 KO PIN - camshaft 1 Printed in U.S.A. October 1977

13

14 CASE 220, 222, 224 AND 444 COMPACT TRACTORS CRANKSHAFT, PISTON - CONNECTING ROD REF. PART NO. DESCRIPTION REQ'D 1 NSS PISTON AND ROD ASSEMBLY IStd. size) 1 2 KO RING SET - piston (For oversize, see item 16) 1 3 NSS RING - top compression 1 4 NSS RING - 2nd compression (Includes expander) 1 5 NSS RING-oil (Includes expander) 1 6 KOA PISTON ASSEMBLY (For oversize, see item 15) 1 7 KO RETAINER - piston pin 2 8 NSS PIN piston 1 9 NSS PISTON 1 10 KOA CONNECTING ROD ASSEMBLY (For undersize, see item 18) 1 11 KO WASHER - special LOCKWASHER 2 13 C SCREW - cap connecting rod 2 14 NSS ROD - connecting 1 15 KOA PISTON ASSEMBLY -.010" oversize 1 15 KOA PISTON ASSEMBLY -.020" oversize 1 15 KOA PISTON ASSEMBLY -.030" oversize 1 15 KOA PISTON ASSEMBLY -.003" oversize (order K std. ring set) KO RING SET - piston.010" oversize 1 16 KO RING SET piston.020" oversize 1 16 KO RING SET - piston.030" oversize 1 18 C CONNECTING ROD ASSEMBLY -.010" undersize 1 19 R OIL SEAL-crankshaft rear BEARING - crankshaft ball 2 21 W 5063-S KEY - 1/4" Sq. x 3/4" (Pump Coupling) 1 22 KOB CRANKSHAFT 1 23 A KEY-flat 3/16" X 3/16" X 1-3/8" (Flywheel) 1 24 C OIL SEAL-crankshaft front WASHER-5/8" NUT - special Marsden 5/8" NF 1 Printed in U.S.A. October 1977

15

16 CASE 220, 222, 224 AND 444 COMPACT TRACTORS CRANKSHAFT, PISTON - CONNECTING ROD REF. PART NO. DESCRIPTION REQ'D 1 NSS PISTON AND ROD ASSEMBLY {Std. size) 1 2 KO RING SET - piston (For oversize, see item 16} 1 3 NSS RING top compression 1 4 NSS RING 2nd compression (IncludeS'^xp^der) 1 5 NSS RING-oil (Includes expander) 1 6 KOA PISTON ASSEMBLY (For oversize, see item 15) 1 7 KO RETAINER - piston pin 2 8 NSS PIN-piston 1 9 NSS PISTON 1 10 KOA CONNECTING ROD ASSEMBLY (For undersize, see item 18) 1 11 KO WASHER-special LOCKWASHER 2 13 C SCREW-cap, connecting rod 2 14 NSS ROD - connecting 1 15 KOA PISTON ASSEMBLY -.010" oversize 1 15 KOA PISTON ASSEMBLY.020" oversize KOA PISTON ASSEMBLY -.030" oversize KOA PISTON ASSEMBLY -.003" oversize (order K std. ring set) KO RING SET - piston.010" oversize 1 16 KO RING SET - piston.020" oversize 1 16 KO RING SET - piston.030" oversize 1 18 C CONNECTING ROD ASSEMBLY-.010" undersize 1 19 R OIL SEAL - crankshaft rear BEARING-crankshaft ball 2 21 W 5063-S KEY - 1/4" Sq. X 3/4" (Pump Coupling) 1 22 KOB CRANKSHAFT 1 23 A KEY-flat 3/16" X 3/16" X 1-3/8" (Flywheel) 1 24 C OIL SEAL-crankshaft front WASHER-5/8" NUT - special Marsden 5/8" NF 1 Printed in U.S.A. October 1977

17

18 CASE 220, 222, 224 AND 444 COMPACT TRACTORS AND 444 CRANKSHAFT, PISTON - CONNECTING ROD REF. PART NO. DESCRIPTION REQ'D 1 NSS PISTON AND ROD ASSEMBLY (Std. size) 1 2 KO RING SET - piston (For oversize, see item 16) 1 3 NSS RING - top compression 1 4 NSS RING - 2nd compression (Includes expander) 1 5 NSS RING - oil (Includes expander) 1 6 KOA PISTON ASSEMBLY (For oversize, see item 15) 1 7 KO RETAINER - piston pin 2 8 NSS PIN-piston 1 9 NSS PISTON 1 10 KOA CONNECTING ROD ASSEMBLY (For undersize, see item 18) 1 11 KO WASHER - special LOCKWASHER - 3/8" 2 13 C SCREW - cap, connecting rod 2 14 NSS ROD-connecting 1 15 KOA PISTON ASSEMBLY -.010" oversize 1 15 KOA PISTON ASSEMBLY -.020" oversize 1 15 KOA PISTON ASSEMBLY -.030" oversize 1 15 KOA PISTON ASSEMBLY -.003" oversize (order K std. ring set) 1 16 KO RING SET - piston.010" oversize 1 16 KO RING SET - piston.020" oversize 1 16 KO RING SET - piston.030" oversize 1 18 C CONNECTING ROD ASSEMBLY -.010" undersize 1 19 R OIL SEAL - crankshaft rear BEARING crankshaft ball 2 21 W 5063-S KEY - 1/4" Sq. x 3/4" (Pump Coupling) 1 22 KOB CRANKSHAFT 1 23 A KEY-flat 3/16" X 3/16" X 1-3/8" (Flywheel) 1 24 C OIL SEAL-crankshaft front WASHER-5/8" 1 ^ NUT-special Marsden 5/8" NF 1 Printed in U.S.A. October 1977

19

20 CASE 220, 222, 224 AND 444 COMPACT TRACTORS ENGINE BLOCK AND ATTACHING PARTS REF. PART NO. DESCRIPTION REQ'D 1 C SPACER - cylinder head 6 2 KO BOLT - cylinder head 2 3 KO WASHER - cylinder head 9 4 KO HEAD cylinder 1 5 KO GASKET - head 1 7 C BLOCK ASSEMBLY - cylinder, short (Includes crankshaft, piston assembly, ring set, crankshaft seals, rod assembly, camshaft assembly, valves, bearings, plate and plate gasket, governor gear assembly and cross shaft) (also includes gaskets) 1 8 C BLOCK ASSEMBLY - cylinder, mini (Includes camshaft assembly, piston assembly, ring set, (1) mainbearing, valves, rod assembly, governor gear assembly and cross shaft (also includes gaskets) 1 9 KO INSERT-exhaust valve 1 10 KO S GUIDE-valve 2 11 KO S SHAFT - stub, governor 1 12 V BEARING - needle, governor shaft PLUG - expansion BOLT - 3/8" x 1-1/2" NChex plated LOCKWASHER - 3/8" plated KO GASKET - camshaft cover 1 17 KO COVER - camshaft gear LOCKWASHER - 1/4" plated BO LT - 1 /4" x 1 /2" NC plated 4 20 KO GASKET - oil pan 1 21 C FLYWHEEL ASSEMBLY 1 22 KO RING GEAR 1 23 C BASE - oil pan LOCKWASHER - internal tooth SCREW- stator 4 26 C PLUG - oil drain 1 27 R L SEA L - crankshaft rear BEARING - crankshaft ball 2 29 KO GASKET - bearing plate 1 29 KO GASKET - shim,.010 UAR PLUG - button, timing hole 1 31 C PLATE - bearing 1 32 C STATOR - 15 amp 1 C CONNECTOR-stator BOLT - 3/8" X 1" NC plated 4 34 C OIL SEAL - crankshaft front WASHER - special, plated NUT special, Marsden 1 38 C DIPSTICK ASSEMBLY 1 39 A "0" RING - dipstick 1 42 KO STRAP - lifting 1 43 C NIPPLE - oil drain extension 1 44 C GASKET - plug, oil drain ELBOW-street NUT - 3/8" NC hex. jam NUT-3/8" NChex 6 49 KO STUD - cylinder head 7 Printed in U.S.A. October 1977

21

22 CASE 220, 222, 224 AND 444 COMPACT TRACTORS ENGINE BLOCK AND ATTACHING PARTS REF. PART NO. DESCRIPTION REQ'D 1 C SPACER - cylinder head 6 2 KO BOLT cylinder head 3/8" x 1-1/2" NC hex 2 3 KO WASHER - cylinder head 9 4 KO HEAD - cylinder 1 5 KO GASKET-head 1 7 C BLOCK ASSEMBLY - cylinder, short (Includes crankshaft, piston assembly, ring set, crankshaft seals, rod assembly, camshaft assembly, valves, bearings, plate and plate gasket, governor gear assembly and cross shaft) (also includes gasket set) 1 8 C BLOCK ASSEMBLY - cylinder mini (Includes camshaft assembly, piston assembly, ring set, valves, rod assembly, governor gear assembly and cross shaft and rear crankshaft seal) (also includes gasket set) 1 9 KO INSERT-exhaust valve 1 10 KO S GUIDE - valve 2 11 KO S SHAFT - stub, governor 1 12 V BEARING - needle, governor shaft PLUG - expansion BOLT - 3/8" x M/2" NC hex plated LOCKWASHER - 3/8" plated KO GASKET - camshaft cover 1 17 KO COVER - camshaft gear LOCKWASHER - 1/4" plated BOLT 1/4" X 1/2" NC plated 4 20 KO GASKET - oil pan 1 21 C FLYWHEEL ASSEMBLY 1 22 KO RING GEAR 1 23 C BASE oil pan LOCKWASHER - internal tooth SCREW - stator 4 26 C PLUG-oil drain 1 27 R L SEAL - crankshaft rear BEARING - crankshaft ball 2 29 KO GASKET - bearing plate 6 29 KO GASKET - shim,.020" UAR PLUG - button, timing hole 1 31 C PLATE-bearing 1 32 C STATOR 1 C CONNECTOR - stator BOLT-3/8" X 1" NC plated 4 34 C OIL SEAL - crankshaft front WASHER - special, plated ^ NUT - special, Marsden 1 38 C DIPSTICK ASSEMBLY 1 39 A "O" RING - dipstick 1 42 KO STRAP - lifting 1 43 C NIPPLE - oil drain extension 1 44 C GASKET - plug, oil drain ELBOW - street NUT-3/8" NC hex, jam NUT - 3/8" NC hex 6 49 KO STUD - cylinder head 7 Printed in U.S. A. October 1977

23

24 CASE 220, 222, 224 AND 444 COMPACT TRACTORS AND 444 ENGINE BLOCK AND ATTACHING PARTS REF. PART NO. DESCRIPTION REQ'D 1 C FILLER TUBE 1 2 KO BOLT - cylinder head special 3/8" x 1-1/2" NC hex 2 3 KO WASHER - cylinder head bolt 9 4 KO HEAD cylinder 1 5 KO GASKET - head 1 6 KO GASKET - filler tube 1 7 C BLOCK ASSEMBLY - cylinder, short (Includes crankshaft and seals, ring set, piston assembly, rod assembly, camshaft assembly, valves, bearing, plate and plate gasket, governor gear assembly and cross shaft) (also includes gasket set) 1 8 C BLOCK ASSEMBLY - cylinder, mini (Includes camshaft assembly, piston assembly, ring set, valves, rod assembly, rear crankshaft seal, governor gear assembly and cross shaft) (also includes gasket set) KO INSERT - exhaust valve 1 10 KO S GUIDE-valve 2 11 C COVER 1 12 C SPACER - cylinder head PLUG-expansion BOLT - 3/8" x 1-1/2" NC hex plated LOCKWASHER-3/8" plated 4 16 KO GASKET camshaft cover, oil fill tube LOCKWASHER LOCKWASHER -1/4" plated BOLT - 1/4" x 1/2" NC plated 4 20 KO GASKET - oil pan SCREW - #10 X 7/16" round head machine LOCKWASHER - #10 internal tooth 7 23 C BASE - oil pan 1 24 C FLYWHEEL ASSEMBLY 1 25 KO RING GEAR 1 26 C PLUG - oil drain 1 27 R L SEAL - crankshaft rear BEARING crankshaft ball 2 29 KO GASKET - bearing plate 1 29 KO GASKET - shim,.010" UAR PLUG - button, timing hole 1 31 C PLATE - bearing 1 32 V STATOR BOLT - 3/8" X r'nc plated 4 34 C OIL SEAL - crankshaft front SCREW - stator WASHER - special, plated 21/32" ID X 1-3/8" OD x 1/4" NUT - special Marsden 5/8" 1 38 C DIPSTICK ASSEMBLY 1 42 KO STRAP - lifting 1 43 C NIPPLE - oil drain extension 1 44 C GASKET - plug, oil drain ELBOW - street NUT - 3/8" NC hex, jam NUT - 3/8" NC hex 6 49 KO STUD - cylinder head 7 Printed in U.S.A. June 1978

25

26 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 23 ENGINE GASKET AND SEAL KIT REF. PART NO. DESCRIPTION REQ'D 1 C KIT engine gasket {10 thru 14 hp engines} 1 2 KO SEAL breather (14 hp engine) 1 3 KO GASKET - camshaft cover 1 4 KO GASKET oi! pan 1 5 KO GASKET - bearing plate 6 5 KO GASKET - shim (.010") UAR 6 KO GASKET - oil fill tube (used on 14 hp) 1 7 KO GASKET - breaker cover 1 8 C GASKET carburetor flange 1 9 C GASKET fuel pump flange 1 10 KO GASKET - carburetor air horn 1 11 KO GASKET - breather plate 1 12 KO GASKET - valve cover 1 13 C GASKET - exhaust 1 14 KO GASKET - pan (not used) KO GASKET - cylinder head 1 Printed in U.S.A. October 1977

27

28 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 25 BAFFLES AND SHROUDS REF. PART NO. DESCRIPTION REQ'D 1 C DEFLECTOR engine air LOCKWASHER - 1/4" zinc plated BOLT - 1/4" X 1/2" NC hex, zinc plated 2 4 KO BAFFLE - cylinder head (10 hp engine) 1 4 KO BAFFLE - cylinder head hp engine) 1 5 KO BAFFLE carburetor side air 1 6 C HOUSING - blower BOLT - 1/4" X 3/4" NC hex, zinc plated LOCKWASHER - 1/4" zinc plated 4 9 KO BAFFLE - cylinder 1 FUEL SYSTEM 1 C CARBURETOR ASSEMBLY & 224 (Repairs page 27) 1 1 C CARBURETOR ASSEMBLY (222 (Repairs page 27) 1 2 C GASKET - carburetor flange 1 3 C ELBOVJ - fuel pump and carburetor CLAMP hose 1/2" 4 5 V HOSE carburetor 5-1/4" LOCKWASHER 5/16" ; BOLT 5/16" x 1" NC hex 2 8 C PUMP - fuel, all models (includes gasket & washers) SCREW - 1/4" x 3/4" NC fillister head LOCKWASHER - 1/4" 2 11 KO GASKET - air horn 1 12 C LINER - fuel tank 1 13 C GASKET - fuel pump mounting, all models 1 14 C ELBOW ASSEMBLY fuel tank 1 15 A CLIP - fuel line 2 16 C HOSE - fuel line 38-1/2" (220, 222, 224) (444 before S/N C HOSE-fuel line 40-1/2" (444-S/N and after) 1 17 C TANK - fuel 1 18 C CAP - fuel tank (Includes insert) 1 19 C INSERT - fuel cap 1 20 C CUSHION fuel tank ELBOW - hose 90 Printed in U.S.A. November 1979

29

30 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 27 CARBURETOR REF. PART NO. DESCRIPTION REQ'D C CARBURETORASSEMBLY 220, C CARBURETOR ASSEMBLY 224 Si KO SPRING tension, idle adjust 1 3 A NEEDLE - main fuel adjust, 220, C NEEDLE - main fuel adjust, 224 & KO SPRING - main fuel adjust 1 5 A NEEDLE idle adjust (220, KO NEEDLE idle adjust (224 & 444) 1 8 A FLOAT carburetor 1 9 KO BOWL carburetor 1 10 KO SCREW AND GASKET ASSEMBLY carburetor bowl 1 11 A KIT carburetor repair 1 12 NSS INLET NEEDLE AND SEAT ASSEMBLY 1 13 NSS GASKET bowl ring 1 14 NSS GASKET bowl baffle 1 15 A GASKET bowl screw 1 16 F PIN floiit 1 Printed in U.S.A. October 1977

31

32 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 29 CHOKE, THROTTLE AND GOVERNOR REF. PART NO. 1 C C C C lu KOA KO C KO HO KO KO KO C KO KO C V V KO S 30 C KO KOA KOA V DESCRIPTION CONTROL - throttle HANDLE - throttle control, black CONTROL choke HANDLE - choke control, white BOLT X 5/8" round head, square neck LOCKWASHER - #10 Std. plated NUT - #10-24 plated LEVER - governor BOLT - 1/4" X 11/4" NC hex WASHER - 1/4" plated NUT-1/4" hex SPRING governor LOCKWASHER - 1/4" plated WASHER - thrust WASHER wavy CLAMP - swivel, wire LEVER - speed control SPACER speed control bracket BRACKET - high speed stop NUT - #10-32 hex JOINT - ball ROD - throttle RING - retaining, throttle rod BUSHING - governor cross shaft SHAFT - governor cross BEARING - needle, governor shaft GEAR ASSEMBLY - governor SHAFT - governor stub WASHER - governor stop pin PIN governor stop BRACKET - throttle cable BRACKET - choke cable SCREW - #10 X 3/8" NC fillister head REQ'D ENGINE MOUNT PLATES 1 C C C D PLATE - engine mount L.H 1 PLATE - engine mount R.H 1 MOUNT - engine 4 WASHER - snubbing 4 RIVET - semi tubular 3/16" 16 BOLT - 3/8" X 2" NChex 4 LOCKWASHER - 3/8" 4 LOCKWASHER - 3/8" countersunk external tooth 4 BOLT - flat head hex socket 4 Printed in U.S.A. June 1978

33

34 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 31 PTO CLUTCH LINKAGE REF, PART NO. DESCRIPTION REOT 1 A NSS LEVER - PTO pnqaqiny (order item 22 and 23) 1 3 C ARM ASSEMBLY - PTO (used S.N , 222- S/N , S/N , S/N and after) 1 3 C ARM ASSEMBLY - PTO (used prior to S/N , S/N , S/N unci S/N BUSHING U;v(;r, dash tower 1 5 C C A PIN cotter 1/8 x V 2 11 C WASHER nylon 3/8" 2 12 c C c WASHER - s Jacer (used on models without hyd, lift) BOLT - 3/8 X 1" n.c. hex 2 20 C c Printed in U.S.A. January 1979

35

36 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 33 CLUTCH ASSEMBLY (PTO) REF. PART NO. DESCRIPTION REQ'D C C C C C C C C C C C C C N 16 C C C C C C CLUTCH AND FAN ASSEMBLY 1 FAN - cooling 1 HUB-clutch 1 PLATE - clutch 1 BOLT - 5/16"- 18 X 3/4" 2 LOCKWASHER - 5/16" countersunk external tooth 2 WASHER - spring 6 PULLEY AND DISC ASSEMBLY 1 KIT - friction disc 1 BEARING - ball 3 WASHER - spacer CAM - clutch SPRING - clutch load SPACER - hub NUT adjust WASHER - fan 17/32" BOLT 1/2" -20 X 5-1/2" NF NUT - 1/2"-20NF GUIDE - adjusting nut WASHER - spacer ARM - engaging SCREEN grass BOLT- 3/8"- 16 x 1" NC LOCKWASHER - 3/8" SPACER - washer.200" (use to replace spacers on early production) Printed in U.S.A. August 1980

37

38 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 35 HOOD, FRAME AND GRILLE USE BEFORE S/N USE BEFORE S/N USE BEFORE S/N USE BEFORE S/N REF. PART NO. DESCRIPTION REQ'D 1 C FRAME - main (220, 222 and 224) (also order C24B72 arm prior to S/N , S/N , S/N )(shown) C FRAME-main (444) (also order C24872 arm prior to S/N ) 1 2 C HOOD AND GRILLE ASSEMBLY (includes item 27) 1 3 C LINER hood 1 4 C HINGE - frame 2 5 C PIN attachment NUT - lock 1/2" NF jam PLUG - hole (models without hydraulic lift) 1 8 C CHANNEL instrument panel 1 9 C ROD - hood hinge PIN cotter 1/8" X 3/4" 1 11 C PIN - latch 2 12 C SPRING-latch PIN roil 3/16" X 1-1/4" 2 14 C PAD - foot rest, L.H 1 14 C PAD - foot rest, R.H BOLT - 5/16" X 7/8" N.C. hex LOCKWASHER - 5/16" 2 17 C SPACER - frame, rear ( C SPACER - frame, rear (220, 222 and 224) LOCKWASHER 1/2" BOLT - 1/2" x 1" N.C. hex 4 20 C SHIELD-heat 1 21 C CLIP - battery hold down BOLT-1/4"-20 X 1/ LOCKWASHER - 1/4" NUT- 1/4" C COVER - access LOCKWASHER 4 27 C HING - hood 1 Printed in U.S.A. November 1979

39

40 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 35B HOOD, FRAME AND GRILLE USE S/N AND AFTER USE S/N AND AFTER USE S/N AND AFTER USE S/N AND AFTER REF. PART NO DESCRIPTION REQ'D 1 C FRAME main (220, 222 and 2241(shown} 1 1 C FRAME - mam ( C HOOD AND GRILLE ASSEMBLY (includes item 27} 1 3 C LINER hood 1 4 C HtNGE - frdme 2 5 C PIN attdchnifiit NUT - lock 1 2" NF PLUG - hole (itiodfls wnhoul hyduiiilic lifl) 1 8 C CHANNEL mstrumcm p.iik'l 1 9 C ROD hood hinye PIN cottlm 1 8" x 3 4" 1 11 C PIN latch 2 12 C SPRING - k^ich PIN roll " x 1 1 4" 2 14 C PAD foot rest, L.H 1 14 C PAD - foot rest, R.H BOLT - 5'16" x 7/8" N.C. hex LOCKWASHER - 5/16" 4 17 C SPACER - frame, rear (444) 2 17 C SPACER - frame, rear (220, 222 and 224) LOCKWASHER - 1/2" BOLT - 1/2" X 1" N.C. hex 4 20 C SHIELD-heat 1 21 C CLIP-battery hold down 1 ^ BOLT - 1/4" - 20 x 1/ LOCKWASHER - 1/4" NUT- 1/4" * C COVER - access 1 25** C COVER-access LOCKWASHER 4 27 C HING - hood 1 *use 220 before S/N before S/N before S/N before S/N **use220 - S/N and after 222 S/N and after S/N and after S/N and after Printed in U.S.A. August 1980

41

42 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 37 SEAT, FENDERS AND TOOL TRAY REF. PART NO. DESCRIPTION REQ'D 1 C SUPPORT - seat, front 1 2 C SUPPORT seat, rear BOLT - 1/2 X 2 1/4" NC hex (444) BOLT - 1/2 X 3-1/4" NC hex (220, 222 and 224) BOLT 1/2 X 1" NC hex LOCKWASHER 1/2". 4 6 C TRAY - tool 1 7 C PIN - seat hinge 1 8 C SEAT (220, 222 and 224) 1 8 C SEAT - (444) 1 9 C CUSHION rubber WASHER - 5/16 x 1-1/4" OD, zinc plated BOLT - 5/16 x 11,'2" 4 12 C BUMPER - seat BOLT 5/16 x 1/2" flange whizlock C HINGE ASSEMBLY - seat 1 15 C FENDER - L.H. (444) use before S/N C FENDER - R.H. (444) use before S/N C FENDER - L.H. (444) use S/N and after 1 15 C FENDER - R.H. (444) use S/N and after 1 16 C FENDER - L.H. (use 220-S/N , S/N , S/N and after) 1 16 C FENDER - R.H. (use 220-S/N , 222-S/N , S/N and after) 1 16 C FENDER - L.H. (use before S/N , S/N , 224 ~S/N ) 1 16 C FENDER - R.H. (use before S/N , 222 -S/N , S/N ) 1 17 C LEVER-shift WASHER - 7/16 x M/4" OD 1 19 C SPRING - shift lever 1 20 C WASH E R cupped NUT - lock 3/8" NC hex 1 22 C GRIP shift lever 1 Printed in U.S.A. November 1979

43

44 CASE 220, 222, 224 AND 444 COMPACT TRACTORS , 222 AND 224 FRONT AXLE REF. PART NO. DESCRIPTION REQ'D 1 C AXLE front 1 2 C SPINDLE - left hand 1 3 C SPINDLE - right hand PiN roll 2 5 C WASH ER - thrust '* FITTING-lube 1 7 C COVER - lube fitting PIN - cotter 5/32 X 1-1/4" 2 9 C WASHER - wheel spindle 2 10 A WASHER - wheel spacer 6 n BOLT - 3/8" NC indented hex head 1 12 C PIN - retaining, axle pivot 1 13 C KIT - drag link rod LOCKWASHER - 1/2" zinc plated NUT - jam 1/2" N.F. hex R.H. thread 8 16 C BALL JOINT-1/2" L.H. thread NUT - jam 1/2" N.F. hex L.H. thread 2 18 C BALL JOINT-R.H. thread 2 19 C TUBE - axle pivot FITTING - lube 2 21 C TIE ROD FRONT AXLE 1 C AXLE - front 1 2 C SPINDLE - right hand 1 3 C SPINDLE - left hand PIN - roll 2 5 C PIN - retaining, axle pivot 1 6 C WASHER - thrust FITTING - lube 1 8 C COVER - lube fitting PIN - cotter 5/32 x 1-1/4'.' 2 10 C WASHER - wheel spindle 2 11 A WASHER - wheel spacer BOLT - 3/8" NC indented hex head 1 13 C KIT - drag link rod LOCKWASHER - 1/2" zinc plated NUT - jam 1/2" N.F. hex R.H. thread NUT - jam 1/2" N.F. hex L.H. thread 2 17 C BALL JOINT - L.H. thread 2 18 C BALL JOINT - R.H. thread 2 19 C 2256B TUBE axle pivot I FITTING-lube 2 21 C TIE ROD 1 Printed in U.S.A. October 1977

45

46 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 41 STEERING GEAR REF. PART NO. DESCRIPTION 1 C C C C C C C C C C C C REO'D Printed in U.S.A. November 1979

47

48 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 43 BRAKE ASSEMBLY REF. PART NO. DESCRIPTION REQ'D 1 C C C C C C C C C C C C C C C C PEDAL - brake actuating ARM - brake pedal PIN. spirol 3/16" x 1-1/4" SPRING - return NUT - centerlock, jam TAB - lift LEVER - brake lock SPRING - brake lock SPACER - brake pedal BAND - brake PIN - clevis BOLT - 3/8" - 16 X 1-1/2" hex NUT - 3/8" - 16 jam ARM - brake ARM - brake (includes adjustment nut) GUIDE - brake actuation WASHER I.D PIN - cotter 1/8" x 1" CLEVIS PIN - clevis PIN - cotter ROD - brake (use before S/N , S/N S/N ) ROD - brake (444) use before S/N ROD - brake (use S/N , S/N , S/N and after) ROD - brake (444) use S/N and after FRONT AND REAR WHEELS C C C C C A C A A C WHEEL - rear. 5 bolt (white) 2 BOLT - rear wheel 10 WHEEL - front (white) (includes items 5 and 6) 2 2 FITTING - lube 2 2 BEARING - wheel, inner 4 4 CAP - plastic, front 2 2 CAP - hub, rear (optional) 2 WHEEL - rear. 6 holt (white) 2 BOLT rear wheel 12 CAP - hub front wheel (optional) 2 2 COVER - lube fitting 2 2 Printed in U.S.A. November 1979

49 MOUNTING POSITION FOR 220, 222 AND 224 TRACTORS.

50 CASE , 224 AND 444 COMPACT TRACTORS 45 IMPLEMENT LIFT REF. PART NO. DESCRIPTION REQ'D 1 C LEVER ASSEMBLY - implement lift FITTING - lube C SPACER-latch 4 4 C LIFT - latch SCREW - 5/16 x 1-1/4" flat head socket 2 6 C BRACKET - mounting top 1 7 C BRACKET - mounting bottom BOLT 3/8x1" NChex NUT-lock 3/8" PIN - spirol 5/16 X 13/4" 1 11 C SPRING lift lever WASHER - 3/8 x 11/16" OD 2 13 C ROD - lift lever push 1 14 C BUTTON thumb 1 C COVER - lube fitting 1 DRAWBAR AND TOW HITCH 1 C DRAWBAR LOCKWASHER - 1/2" zinc plated BOLT- 1/2 x 1" NChex zincplated 2 Printed in U.S.A. October 1977

51 46

52 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 47 TRANSMISSION AND FINAL DRIVE 220- USED PRIOR TO S/N USED PRIOR TO S/N USED PRIOR TO S/N USED PRIOR TO S/N REF. PART NO. 1 C C C D C C C C C C C C C B C C A C C C C C C C C NSS 30 NSS 31 C C R C C C c c c CASE - transmission DESCRIPTION BEARING - flange BEARING flanged SEAL - axle BEARING - sleeve BEARING - sleeve PLUG - filler and drain 1/2" SEAL - shift rod BEARING - roller, input shaft CAP - shift rod SHAFT - axle, short R.H. (220, 222 and 224) SHAFT - axle, short R.H. (444) SHAFT - axle, long L.H. (220, 222 and 224) SHAFT - axle, long L.H. (444) RING - retainer, axle GASKET - transmission cover COVER - transmission BREATHER - transmission LOCKWASHER - 1/4" BOLT - 1/4 X 1/2" NChex FORK - shift ROD - gear shift RING - retaining GEAR - cluster input GEAR - high 41 tooth GEAR - low 55 tooth KIT - diff. case (mcludes Ref. 34 and 35) KIT - differential pinion and side gear REQ'D GEAR - differential pinion 2 GEAR - differential 2 WASHER - pinion thrust 2 PIN - differential cross 1 PIN - differential cross lock 1 SCREW - 3/8 X 5" NF hex cap 4 NUT - lock 3/8" NF hex 4 WASHER - differential 2 WASHER - spacer UAR GEAR - brake idler RING - retainer, brake idler BRAKE DRUM KEY - Woodruff, brake idler PIN - roll 3/16 X 1-1/4" BOLT - 1/2" - 13 X 1" hex 4 LOCKWASHER - 1/2" 4 Printed in U.S.A. January 1979

53

54 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 47B TRANSMISSION AND FINAL DRIVE USED S/N AND AFTER 222 USED S/N AND AFTER USED S/N AND AFTER 444 USED S/N AND AFTER REF. PART NO. DESCRIPTION REQ'D C CASE ASSEMBLY - transmission 1 1 NSS CASE - transmission 1 2 C BEARING -flange 2 3 C BEARING - flange 2 4 C SEAL - shaft 3 5 C BEARING - sleeve 1 6 C BEARING - sleeve 1 7 C SEAL-shift rod 1 8 F 7232 BEARING - roller 1 9 C CAP-shift rod PLUG - 1/2" filler and drain 2 11 C SHAFT - axle, short R.H. (220, 222 and 224) 1 12 C SHAFT - axle, short R.H. (444) 1 13 C SHAFT - axle, long L.H. (220, 222 and 224) 1 14 C SHAFT - axle, long L.H. (444) 1 15 B RING - retainer, axle 2 16 C GASKET - transmission cover 1 17 C COVER - transmission 1 18 A BREATHER - transn:iission LOCKWASHER - 1/4" BOLT 1/4 x 1/2" NC hex 6 21 C FORK shift 1 22 C ROD - gear shift 1 23 C RING - retaining 2 24 C GEAR - cluster input C GEAR - high 41 tooth 1 26 C GEAR low 55 tooth 1 27 C KIT - diff. case (includes Ref, 34 and 35) 1 C KIT - differential pinion and side gear 1 29 NSS GEAR - differential pinion 2 30 NSS GEAR - differential 2 31 C WASHER - pinion thrust 2 32 C PIN - differential cross R PIN - differential cross lock 1 34 C SCREW - 3/8 x 5" NF hex cap NUT-lock 3/8" NF hex 4 36 C WASHER - differential 2 37 C WASHER - spacer UAR 38 C GEAR - brake idler 1 39 C RING - retainer, brake idler 1 40 C BRAKE DRUM KEY - Woodruff, brake idler PIN - roll 3/16 X 1-1/4" BOLT - 1/2" - 13 X 1" hex LOCKWASHER - 1/2" 4 Printed in U.S.A. January 1979

55

56 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 49 HYDRAULIC SYSTEM REF. PART NO. 1 C W 5063S 6 c c c c c c c C C C NSS 18 c D C C C C C C C C c A c c c DESCRIPTION SUPPORT - pump mounting BOLT - 3/8" X 3/4" NC hex. support mounting BOLT - 3/8" X 1" NF hex soc. hd.. pump mounting LOCKWASHER 3/8" zinc plated KEY - square 1/4" x 3/4" (engine shaft) COUPLING - pump, 9/16" shaft (220, 222) (See page 51) COUPLING pump, 9/16" shaft (224, 444) (See page 51) PUMP - hyd. 9/16" shaft (repairs page 51 or 518) FITTING - hyd. 3/4" x 7/8" "0" Ring "O" RING - 5/8" (for C17263 fitting) TUBE valve to lov^er motor port (220, 222 and 224) TUBE valve to upper motor port (220, 222 and 224) EXCHANGER heat CLAMP hose HOSE - rubber, tank to heat exchanger RESERVOIR - hydraulic oil CAP - reservoir (includes insert) INSERT reservoir cap (use C25239 and C25240) TIE - hose clamp CLAMP hose HOSE - suction HOSE - hydraulic, pump to valve "O" RING - 1/2" (for C18797) TUBE - valve to heat exchanger TUBE valve to lower motor port (444){use before S/N )., TUBE - valve to lower motor port (444) (use S/N and after). TUBE - valve to upper motor port (444) (use S/N and after) TUBE - valve to upper motor port (444)(use before S/N )., FITTING - motor port, 90 elbow, "0" Ring "O" RING 5/8" (for fitting) VALVE - hydraulic control, single spool (220, 222) (repairs page 53). VALVE - hydraulic control, two spool (all models with hydraulic lift) (repairs page 53) SCREW 5/16" X 1-1/4" N.C NUT - lock 5/16" N.C. hex FITTING hydraulic valve 5/8" x 7/8" "O" Ring "O" RING - 5/8" SEAL - motor to transmission MOTOR - hydraulic (220, 222 and 224) (repairs page 55) MOTOR - hydraulic (44) (repairs page 55) SCREW 1/2" X 1-1/4" N.C. flanged 12 pt HOSE rubber, 4" REQ'D Printed in U.S.A. November 1979

57

58 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 51 HYDRAULIC PUMP AND COUPLING (PARKER-HANNIFIN) (FOR 220 S/N TO SEE PAGE 51B) (FOR 222 S/N TO SEE PAGE 51BI REF. PART NO. DESCRIPTION REQ'D 1 C PUMP-hyd. 9/16" shaft 1 2 C PIN - dowel 2 3 C COVER - rear 1 4 C GEAR ASSEMBLY - driven 1 5 C "O" RING - cover 2 6 C BODY-pump 1 7 C COVER - front 1 8 C SEAL-shaft 1 9 NSS GEAR ASSEMBLY-drive 1 C SHAFT - drive 1 C GEAR - drive 1 C KEY-gear 1 C RING - retaining 2 10 C PLATE - wear 1 11 C SHIELD-heat 1 12 C GASKET 1 13 C SEAL BOLT 4 15 C KEY - 3/16" square 1 16 C WASHER 4 17 C COUPLING-pump (220 and 222) 1 17 C COUPLING - pump (224 and 444) 1 18 NSS HUB - (order item 17) 1 19 NSS HUB - (order item 17) SCREW - set 5/16" x 5/16" NC socket head 2 21 A SPIDER- (for C coupling) 1 21 C SPIDER- (for C coupling) 1 HEAT EXCHANGER MOUNTS AND MUFFLER SHIELDS 1 C C C C C C Printed in U.S.A. January 1979

59

60 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 51B HYDRAULIC PUMP AND COUPLING (BORG-WARNER) (USED 220 S/N TO (USED 222 S/N TO ) REF. PART NO. 1 NSS 2 C NSS 4 C C C NSS 8 A NSS D NSS D C C NSS 18 NSS 19 A C DESCRIPTION PUMP - hyd. 9/16" shaft (order C24828 pump) BODY - pump COVER ASSEMBLY - pump (order C24828 pump)... GEAR - drive, pump GEAR - driven, pump PLATE wear SEAL AND RETAINER - wear plate (order C24334 Kit) RING - retaining SEAL - "0" Ring (order C24334 Kit) PLUG - pipe PIN - dowel SEAL-shaft (order C24334 Kit) BOLT - 1/4" X 1-1/2" NC hex, grade 5 WASHER - 1/4" KEY - square 3/16" x 13/16" COUPLING - 220, 222 HUB - coupling (order item 16) HUB - coupling (order item 16) SPIDER - (for C20058 coupling) SETSCREW -5/16" x 5/16" N.C. soc. hd KIT - seal (includes items 7, 9 and 12) REQ'D 1 HYDRAULIC PUMP (CESSNA) REF. PART NO. NSS 1 F FHO NSS 4 NSS 5 H NSS 7 H H A H NSS 12 NSS H DESCRIPTION PUMP - hyd. 9/16" shaft (use C24828 pump) SPRING DIAPHRAGM - wear plate COVER - front (use C24828 pump) COVER - rear (use C24828 pump) SEAL-shaft BODY - pump (use C24828 pump) SEAL - diaphragm GASKET - back up KEY - 3/16" square x.609 GASKET - protector GEAR ASSEMBLY - drive (use C24828 pump). GEAR ASSEMBLY - driven (use C24828 pump) BALL - steel 7/32" PIN - dowel 1/4" x 1-1/4" BOLT - 5/16" - 18 X 2-1/2" 12 pt. flange REQ'D 1 2 Printed in U.S.A. January 1979

61

62 CASE 220, 222, 224 AND 444 COMPACT TRACTORS S3 HYDRAULIC COMTROL VALVE (TWO SPOOL) REF. PART NO. DESCRIPTION REQ'D C A NSS 3 NSS 4 A NSS C C C C C D C C C C C C C C C C C C VALVE - control, two spool RING - retaining SPOOL - motor (Order C21496) SPOOL - float (Order C SEAL spool BODY - valve (Order C21496) BALL-steel 5/16" SPRING - relief SCREW - relief adjust GASKET - relief adjust cap CAP - adjust screw DETENT - spool SPACER - detent SPRING detent return WASHER - return SPRING - relief BALL steel 1/4" COVER - detent SCREW detent SPRING detent SCREW - cover PLUG - pipe RETAINER - ball seat SCREW - adjust, relief GASKET - adjust cap CAP - adjust screw KIT - relief (includes items 6, 7, 22, 23, 24 and 25) KIT - relief (includes items 8, 9, 10, 15 and 16) KIT - detent (includes items 11, 12, 13, 14, 16, 1 7, 18, 19 and 20) 1 2 HYDRAULIC CONTROL VALVE (SINGLE SPOOL) C VALVE - control, single spool 1 1 A RING retaining 2 2 NSS SPOOL - Order C21495 valve 1 3 A 7982 SEAL - spool 2 4 NSS BODY-valve (Order C21495) BALL - steel 5/16" 1 6 C SPRING - relief 1 7 C SCREW relief adjust 1 8 C GASKET - relief adjust cap 1 9 C CAP adjust screw PLUG 1/4" 3 11 C RETAINER - ball seat 1 C KIT - relief (Includes items 5, 6, 7, 8, 9 and 11) 1 Printed in U.S.A. October 1977

63

64 CASE 220, AND 444 COMPACT TRACTORS 55 SPEED CONTROL REF. PART NO. DESCRIPTION REO'D 1 A C BUSHING - lever 3 C C C C C HYDRAULIC DRIVE MOTOR C C C NSS 3 NSS 4 C c NSS 7 C C C C C c NSS 12 NSS 13 D NSS 15 C C C NSS C C NSS C NSS C C C MOTOR hydraulic, 220, 222 and 224 MOTOR - hydraulic. 444 RIMG retaining SPACER - {See kit below) SEAL - oil (See kit below) HOUSING ASSEMBLY END CAP SEAL - (See kit below) SHAFT - coupling DRIVE LINK 220, 222 and 224 DRIVE LINK 444 PLATE wear ROTOR ASSEMBLY - 220, 222 and 224 ROTOR ASSEMBLY 444 KIT - manifold PLATE - manifold MANIFOLD COMMUTATOR AND RING SET RING - sealing (See kit below) SLEEVE 220, 222 and 224 SLEEVE BOLT 3/8" X 3-7/8" NF hex, 220, 222 and 224 BOLT - 3/8" X 4 3/8" NF hex, 444 WASHER back up,.010" (See kit below) KIT - "O" ring and seal RING sealing SEAL - dirt (not used - throw away item) SEAL SEAL RING - retaining SPACER seal WASHER back up,.010" Printed in U.S.A. October 1977

65

66 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 57 STARTER REF. PART NO. 1 C V V V NSS 6 V V V V c c V V NSS 15 V c V NSS 19 C C DESCRIPTION STARTER ASSEf IBLY BOLT - thru CAP - end KIT - commutator cap CAP - commutator KIT - brush and spring KIT - brush holder KIT - hardware WASHER - armature thrust ARMATURE KIT-drive SPRING - anti-drift SPACER - gear stop GEAR - drive NUT - gear stop COVER - dust SPACER - dust cover BODY - starter BOLT shoulder 3/8" - 20 x 1-5/16" LOCKWASHER - 3/8" DECAL - alternator electrical system DECAL- "DO NOTSTRIKE" REQ'D 1 2 Printed in U.S.A. August 1980

67 58 BATTERY

68 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 59 ELECTRICAL SYSTEM use before S/N use before S/N use before S/N use before S/N REF. PART NO. DESCRIPTION REQ'D 1 C C C A C C C C C C C C C C C C A 245Q9 17 C C C V C KO V C A V KO NSS 30 C c c HARNESS - wilt' HARNESS - wiie CAB LE - sdk'nnifl to s'di t.;i- (bljck). CABLE - solenoid to btutery pu'^itive CABLE - battery neqativi! to ijinund ( CONNECTOR - statoi etf). lack) CONNECTOR ru-ctifiet (early production) CONNECTOR - lights AMMETER - 30.imps, 1 2v RECTIFIER - voltage, 1 2v (early production) SWITCH - neutial stait (mckides wiicl INSULATOR - locator BATTERY 1 2v CAP - battery SWITCH ASSEMBLY - ignition (includes key and lockwasher). KEY - ignition SOLENOID - Stan 1 2v HEADLAMP ASSEMBLY - 12v (repairs page 61) STARTER - bendix drive (repairs pagu' 57) STATOR SWITCH - [leutral stert. PTO COIL- ignition, 12v (includes bracket) BRACKET - coil mounting SPARK PLUG - (includes gasket) GASKET - spark plug KIT - high tension cable CONDENSER FUSE - 20 amp (included in harness) BREAKER CONTACT ASSEMBLY - ignition (repairs page 63) WIRE - solenoid to micro switch RECTIFIER - voltage, 12v (late production) CONNECTOR - rectifier (late production) Printed in U.S.A. August 1980

69 59A BATTERY

70 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 59B ^ ELECTRICAL SYSTEM use S/N and after use S/N and after 224 use S/N and after use S/N and after REF. PART NO. DESCRIPTION REQ'D 1 C C c c c c c c c c c c c c c A c c c V c KO V c A V KO NSS 30 C HARNESS - wire HARNESS - wire CABLE - solenoid to starter (black) CABLE - solenoid to battery positive (red) CABLE - battery negative to ground (black) CONNECTOR - stator CONNECTOR - rectifier CONNECTOR - lights AMMETER - 30 amps, 12v RECTIFIER - voltage, 12v SWITCH - neutral start (includes wire) INSULATOR - locator BATTERY - 12v CAP battery SWITCH ASSEMBLY - ignition (includes key and lockwasher) KEY - ignition SOLENOID - start 12v HEADLAMP ASSEMBLY - 12v (repairs page 61) STARTER - bendix drive (repairs page 57) STATOR SWITCH - neutral start, PTO COI L ignition, 12v (includes bracket) BRACKET - coil mounting SPARK PLUG - (includes gasket) GASKET - spark plug KIT - high tension cable CONDENSER FUSE - 20 amp (included in harness) BREAKER CONTACT ASSEMBLY - ignition (repairs page 63 WIRE - solenoid to micro switch Printed in U.S.A. August 1980

71

72 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 61 ELECTRICAL SYSTEM HARDWARE REF. PART NO, DESCRIPTION REQ'D 1 C C C NSS 6 A C a C g C C NUT - switch mounting 1 LOCKWASHER - internal tooth 1 NUT - speed type "U" 4 SCREW - #8 X 1/2" self tapping, rd. head Phillips 4 HEADLAMP ASSEMBLY 2 RECEPTACLE - headlamp (order C22571) 1 BULB - headlamp 1 GASKET - headlamp 2 LENS - headlamp 1 BOLT- 1/4"- 20x 1/2"hex 2 LOCKWASHER - 1/4" external tooth 5 NUT - 1/4" - 20 hex 3 BOLT - 1/4" - 20 X 1-1/8" rd. head sq. neck 2 LOCKWASHER - 1/4" 2 NUT- 5/16" NF hex 2 NUT-#10 N.F. hex 2 LOCKWASHER -#10 2 BOLT - 5/16" X 3/4" N.C. rd, head sq. neck 1 BOLT 1/4" X 3/4" N.C. rd. head sq. neck 1 NUT- 5/16" NChex 1 SCREW - #4-40 X 3/4 N.C. pan head 2 NUT-#4-40hex 2 LOCKWASHER - #4 2 COVER - terminal 1 SCREW -#10 X 1-1/2" N.F. self tap 1 BOLT - 5/16 X 1/2 N.C. hex, self tap 2 BOLT - 1/4"-20x3/4"hex 2 LOCK WASHER - 5/16" 2 BOLT - 1/4" - 20 X 1-1/4" hex 1 NUT - speed type 2 SCREW - self tapping 2 Printed in U.S.A. August 1980

73

74 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 63 D70115 FLOOD AND TAIL LAMP (OPTIONAL) REF. PART NO. DESCRIPTION REQ'D 1 D LIGHT ASSEMBLY - flood and tail.. 2 A A NSS SHELL - light (order D70115 light SCREW AND LOCKWASHER - #8-32 X 3/8" N.C 7 A g BREAKER CONTACTS 1 NSS 2 NSS 3 V SCREW - #10 X 3/8" round head, zinc plated 4 KO V KO C C Printed in U.S.A. October 1977

75

76 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 65 DECALS USED PRIOR TO S/N: (English) REF. PART NO. DESCRIPTION REQ'D (French and English) DECAL DECAL DECAL DECAL DECAL DECAL Printed in U.S.A. January 1979

77

78 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 65B DECALS USE S/N AND AFTER (English) REF. PART NO. DESCRIPTION REQ'D IB DECAL - "Case" seat back DECAL - gasoline DECAL - hydraulic reservoir DECAL - instrument panel DECAL - shift range DECAL - parking brake DECAL - clutch, brake DECAL - hood top, 220 DECAL - hood top, 222 DECAL - hood top, 224 DECAL - hood top, 444 DECAL - hood R. H. (shown) DECAL - hood L. H MEDALLION - "CASE" French) 1 NSS NSS 9 NSS 10 NSS DECAL - hood top, NSS 12 NSS DECAL - hood R. H. (shown) 13 NSS DECAL-hood L. H 14 NSS MEDALLION - "Case" Printed in U.S.A. January 1979

79 66

80 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 67 K8 WHEEL WEIGHTS - MODEL 220,222, AND 224 REF. PART NO. DESCRIPTION REQ'D 1 NSS WEIGHT - wheel 55 tb. (Order as Machinery Item) NUT - 1/2" NC hex WASHER 1/2" BOLT - 1/2" x 7" Rd. head Sq. neck 4 K10 WHEEL WEIGHTS - MODEL NSS WEIGHT-wheel 751b. (Order as Machinery Item) NUT - 1/2" NC hex WASHER-1/2" BOLT - 1/2" x 6" Rd. head Sq. neck 4 Printed in U.S.A. October 1977

81

82 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 69 MODEL J30 HYDRAULIC LIFT REF. PART NO. 1 C C C C C A C C c C C C C c C C NSS 31 C C C NSS 35 NSS 36 NSS C C DESCRIPTION CROSS SHAFT ASSEMBLY FITTING - lube PIN - cylinder to lever....' PIN - cotter 1/8" x 1" PIN - cotter 1/8" x 2 1/2" BRACKET - mounting, top BRACKET mounting, bottom BOLT - 3/8" X 1" NC hex NUT - 3/8" NC hex LEVER - lift control KNOB - control lever BUSHING - lift lever PIN - cotter 3/32" x 3/4" WASHER - 1/2" WASHER nylon SPRING - control lever WASHER - 5/16" ROD - control NUT -5/16 NF hex BALLJOINT BOLT - 3/8" X 1" NC hex LOCKNUT - 3/8" NC hex WASHER - 3/8" x 11/8" OD BRACKET-cylinder PIN - cylinder foot VALVE - hydraulic, 2 spool FITTING - valve (includes "O" ring) HOSE-short HOSE - long CYLINDER - lift (order (1) CI9475 and (1) CI7579) BODY - cylinder ROD AND PISTON ASSEMBLY FOOT cylinder SEAL "O" RING "O" RING KIT - seal, cylinder (consists of items 34, 35, and 36) COVER lube fitting ' REQ'D Printed in U.S.A. October 1977

83

84 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 71 H26 AND J26 THREE POINT HITCH FRAME, LI FT RODS AND ARMS REF. PART NO. DESCRIPTION REQ'D 1 C HITCH PLATE ASSEMBLY FITTING lube 2 C ROD ASSEMBLY-lift R.H 1 3 C NUT lift rod 1 4 C ROD ASSEMBLY - R.H. lift PIN roll 1/4x3" PIN - cotter 3/16 x 1" WASHER - plain 5/8" 4 8 C ARM - lift 2 9 C CHAIN stay 19 links BOLT 5/16 X 5/8'hex, zinc plated NUT - lock 5/16" NC hex 2 12 B PIN klik 2 13 A PIN klik 3 14 C ROD lift L.H 1 15 C PIN - clevis 1 C LINK ASSEMBLY 1 16 C CENTER TUBE ASSEMBLY 1 17 C 14709' BALL END ASSEMBLY R.H. THREAD 1 18 C BALL END ASSEMBLY L.H. THREAD PIN - roll 1/8 x 7/8" 2 20 C PIN - clevis 5/8x3" 1 H26 AND J26 THREE POINT HITCH CYLINDER AND DRAWBAR MOUNTING 1 C HITCH PLATE ASSEMBLY 1 2 C PIN - lower cylinder mountiny 1 3 C PIN - upper cylinder mounting PIN - cotter 1/8 x 1" BOLT - 1/2 x 1-1/4" NC, hex, zinc plated 2 Printed in U.S.A. November 1979

85 72

86 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 73 MODEL H26 AND J26 THREE POINT HITCH AND HYDRAULIC CONNECTIONS AND COMPONENTS REF. PART NO. DESCRIPTION REQ'D C C NSS 7 C C C C A A NIPPLE - 1/4 X 3" ELBOW -90" HOSE - hydraulic short HOSE hydraulic long - FITTING - tee (Includes "0" ring)(eahy production) CYLINDER ASSEMBLY - (order (1) C19480and (1) C19481) BODY - cylinder ROD AND PISTON ASSEMBLY FOOT cylinder SEAL wiper "O" RING "O" RING 2 FITTING - tee, swivel (late production) 2 MODEL F-27 HITCH ADAPTER 1 C C BOLT 1/2 X 3" NC hex, zinc plated 4 Printed in U.S.A. November 1979

87

88 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 75 MODEL J22, J24, K22 AND K24 SLEEVE HITCH REF. PART NO. DESCRIPTION REQ'D 1 C HITCH FRAME ASSEMBLY (444) {J24, K24) 1 2 C c c c c BOLT - 1/2 X 1-1/2" NC hex, zinc plated C BOLT 1/2 X 2-3/4" NC hex. zinc plated 2 14 C C HITCH FRAME ASSEMBLY (220, 222 and 224)(J22, K22)... 1 Printed in U.S.A. November 1979

89

90 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 77 MODEL K18 FRONT END WEIGHT BRACKETS REF. PART NO. DESCRIPTION REQ'D 1 C BRACKET - mounting 1 2 C BRACE - rear 1 3 C BRACKET - weight mounting BOLT - 1/2 X 1-1/4" NC hex, zinc plated WASHER - 1/2" zinc plated NUT - 1/2" NC hex. zmc plated LOCKWASHER - 1/2" 8 MODEL H13WE1GHT BOX 1 C FRAME - weight box 1 2 C BOX - weight 1 3 C SUPPORT - weight box 1 4 C PLATE-hitch BOLT - 3/8" x 1" round head, square neck BOLT - 3/8" X 1" NC hex NUT 3/8" NChex LOCKWASHER - 3/8" WASHER-3/8" 7 Printed in U.S.A. October 1977

91 78

92 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 79 J17, K17 AND L17 HYDRAULIC PTO KIT REF. PART NO. DESCRIPTION REQ'D 1 C VALVE-PTO control (J17, L17) FITTING - straight 3/4" NPT X 5/8" tube FITTING - elbow 90*^ 3/4" NPT x 5/8" tube FITTING - elbow 90 1/2" NPT X 1/2" female NPSM swivel 2 5 C BRACKET - valve mounting BOLT 3/8" hex NCx 3/4" LOCKWASHER - 3/8" 4 8 C TUBE - PTO valve to travel control valve (J17, K17) 1 8 C TUBE - PTO valve to travel control valve (L17) 1 9 C TUBE - pump to PTO valve (L17) 1 9 C TUBE pump to PTO valve (J17, K17) FITTING-90 swivel elbow 37*^ x37'* flare 3/4'NPT X 5/8" tube BOLT-5/16" X 1" NC hex WASHER-5/16" LOCKWASHER - 5/16" 3 14 NSS VALVE control (K17} (usec18281} 1 Printed in U.S.A. November 1979

93

94 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 81 J17 AND L17 HYDRAULIC PTO VALVE J17, K17 AND L17 LEVER ASSEMBLY REF. PART NO, 1 C C C NSS 9 C C c c c c c D T A c A A C DESCRIPTION REQ'D VALVE - control 1 SEAL - U-cup PIN cotter 1/16" x 1/2" PIN - handle.., BRACKET - handle SCREW 1/4" x 5/8" NC fillister head LOCKWASHER 1/4", BODY AND SPOOL ASSEMBLY (use C18281 valve) ADAPTER - spool WASHER - plain 1/4" SCREW - 1/4" X 1/2" rd, hd. machine BONNET detent PIN - detent SPRING - detent WASHER detent spring CAP detent SCREW-bonnet #8-32 x 1-1/4" fillister head LEVER - valve PLUG - relief 3/8" NPT SHIM,010" thick UAR SPRING relief SHIM,020" thick UAR BALL - relief 3/8" SEAT relief "O" RING - relief seat KNOB - hand throttle BUSHING nylon K-17 HYDRAULIC PTO VALVE 1 NSS VALVE - control (use C18281 valve). 2 NSS BODY - valve (order CI 8281 valve) 3 NSS SPOOL - valve (order C18281 valve) WASHER - spool 5 H RETAINER - spool SCREW - set 7 C COVER detent and relief 8 C SPRING - detent BALL-detent, 1/4" steel BOLT - 1/4" - 20 x 3/4" hex LOCKWASHER - 1/4" 12 H SEAT - relief 13 C SHIM - pressure adjust 14 C PIN - limit BALL-relief, 5/16" steel 16 C SPRING - relief 17 C V-PACKING 18 C WASHER - backup 19 L "O" RING 20 A "0"RING Printed in U.S.A. November 1979

95

96 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 83 MODEL L19 AND M19 FLOW CONTROL VALVE KIT REF. PART NO. DESCRIPTION REQ'D 1 C VALVE flow control 1 A "0" RING-shaft 3/4" X 15/16" 2 F RING - retaining - shaft.867 I.D 2 2 C LEVER valve 1 3 A KNOB - lever BOLT - 1/4" x 2-1/2" NC hex (L19) BOLT - 1/4" - 20 x 2-1/4" NC hex (M19) NUT - lock 1/4" NC hex FITTING-elbow 90 1/2" NPT FITTING-straight 1/2" NPT 1 8 C TUBE - flow control valve to tube 1 9 C TUBE bypass to return line 1 10 C TUBE - valve to tractor valve 1 11 C TUBE - heat exchanger 1 12 C HOSE-return CLAMP-hose 2 14 C TUBE - PTO valve to tube (M19) 1 14 C TUBE-PTO valve to tube (L19) 1 15 C SPACER - (L19} 2 16 C PLATE adapter {M19) BOLT - 1/4" -20X 5/8" NChex (Wn9) 2 C DECAL - valve, "slow - fast" (English) DECAL - valve, "slow - fast" (French) 1 Printed in U.S.A. November 1979

97

98 CASE 220, 222, 224 AND 444 COMPACT TRACTORS L7 HOLDING VALVE (220, 222 AND 224 ALL) L9 HOLDING VALVE (444 BEFORE S/N ) IVI9 HOLDING VALVE (444 S/N AND AFTER) 83B REF. PART NO. 1 C C C C C C C C A 7623 DESCRIPTION VALVE - holding (includes "0" ring) TUBE valve to valve (L-7) TUBE valve to valve (L-9) TUBE - valve to valve (M9) TUBE - valve to valve (M9) TUBE - valve to valve (L-7) TUBE - valve to valve (L-9) TUBE - valve to motor CONNECTOR - straight, male "0" RING CONNECTOR - straight, male "0" RING ELBOW - adjustable "0" RING CONNECTOR - straight, male "O" RING CONNECTOR - straight, male/female swivel "O" RING "0" RING - end caps REQ'D Lll WEIGHT KIT 1 C BRACKET - mounting, front 1 2 C C C BOLT - 1/2"- 13 X 1-1/4" hex 2 Printed in U.S.A. August 1980

99

100 CASE 220, 222, 224 AND 444 COMPACT TRACTORS 83D L29 PTO MOUNTING FRAME, SHIELD, IDLERS AND GEAR COVER REF. PART NO. DESCRIPTION REQ'D 1 C C C C C R F C FRAME - mounting COVER - gear. PLUG - oil BOLT. 1/4"- 20 X 3/4" hex WASHER - 5/16" NUT - 1/4" - 20 hex SHIELD - PTO BOLT - 5/16"- 18 X 1/2", special PULLEY-"V" groove BOLT-3/8" - 16 X 3/4" LOCK WASHER - special WASHER-3/8" ARM - idler BUSHING - sleeve PULLEY-flat idler BOLT - 1/2"- 13 X 1-3/4" hex.. NUT - 1/2" lock, hex WASHER - 5/8" PIN-cotter 5/32" x 1" SPRING - tension L29 SPINDLES, DECALS AND BELT 1 C C C A C C C A A C C C C H C C C HOUSING - PTO shaft 1 WASHER-thrust 2 WASHER - spacer 1 SHAFT-spline 1 RING - retainer 1 BEARING - roller 2 GEAR - driven 1 SET SCREW-3/8" 2 KEY - 5/16" X 2" 1 BOLT-3/8"- 16x3/4" hex 8 LOCKWASHER -3/8" 8 HOUSING - spindle 1 BEARING 2 RING - retaining 2 SPACER - bearing 1 WASHER - spacer 2 SPINDLE-input 1 PULLEY - spindle 1 KEY-3/16" square x 7/8" 1 NUT-3/4"-16 lock, hex 1 DECAL - "Case".. 1 DECAL - "Warning" 1 DECAL-drive belt 1 BELT - drive (444, 446, 448} 1 BELT - drive (210, 220, 222, 224) 1 Pnnted in U.S.A. August 1980

101 84 NUMERICAL INDEX PART PAGE REF, PART PAGE REF, PART PAGE REF, NO. NO, NO, NO. NO. NO, NO. NO, NO C C c C c C c C c C c 1188V C c C c ] C c C c c c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c A c c B c c B c c C c c C c c C c c C c c C c c C c c

102 NUMERICAL INDEX 85 PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO. c c c c c c c c c c c C c c C c c c C c c c c c c c c c c c c tc c c c c c c c c c c c c c C c c c c c c c c c c c c c c c c c C c c C c c C c c C c c C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c

103 86 NUMERICAL INDEX PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO. c c C C c c c c c C c c C c c c c c c c c C c c C c c C c c c c c c c c c c c C c c C c c c c c c c c C c c c c c c c c c c c C c c c c c C c c c c c C c c C c c C c c c c c C c c a C c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c c

104 NUMERICAL INDEX 87 PART PAGE REF NO. NO. NO. PART PAGE REF NO. NO. NO. PART PAGE REF NO. NO. NO. C c c c c c c c c c D D D D D D F F HO KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA KOA lo; KOA KOA KOA KOA KOA KOA KOA KOA KOB KOB KOB KOD KOD KOD KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO S 7 17 KO S 7 40 KO S 9 17 KO S KO S KO S KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO S KO S KO S KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO

105 88 NUMERICAL INDEX PART PAGE REF. PART PAGE REF. PART PAGE REF. NO. NO. NO. NO. NO. NO. NO. NO. NO. KO W 5063-S KO w 5063-S KO KO KO KO KO KO HARDWARE CODE NUMBERS KO KO KO KO KO KO KO KO KO KO KO KO KO KO KO N R R R R R R R T V V V V V V V V V V V V V V V V V V V V V V J. V V W 5063-S w 5063-S

106 NUMERICAL INDEX 89 PART PAGE REF. PART PAGE REF. PART PAGE REF NO. NO. NO. NO. NO. NO. NO. NO. NO & , '

107 90 NUMERICAL INDEX PART NO. PAGE NO. REF. NO

108