IAPMO RESEARCH AND TESTING, INC E. Philadelphia Street, Ontario, CA (909) Fax (909)
|
|
|
- Marybeth Nelson
- 6 years ago
- Views:
Transcription
1 IAPMO RESEARCH AND TESTING, INC E. Philadelphia Street, Ontario, CA (909) Fax (909) CERTIFICATE OF LISTING IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective : June Rev. 7/20/ Void After: June 2018 Product: EPA WaterSense High Efficiency Lavatory Faucets File No Issued To: CHUNG CHENG FAUCET CO., LTD. 279 HSING HO ROAD WANG TYAN VILLAGE, TATU HSIANG TAICHUNG R.O.C. TAIWAN Identification: Each product shall be marked per the marking requirements of the applicable performance standard. The product packaging shall bear the EPA WaterSense label. Characteristics: Lavatory faucets manufactured in compliance with the applicable requirements of the EPA WaterSense High Efficiency Lavatory Faucet Specification. To be installed in accordance with the manufacturer's installation instructions. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory s compliance to the applicable requirements of ISO/IEC Products are in compliance with the following standard(s): EPA WaterSense High Efficiency Lavatory Faucet Specification (version 1.0, edition) This listing period is based upon the last date of the month indicated on the Effective and Void After shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
2 MODELS: Certification 6/8/2008 CCF, KOSPAK W10X- 6/8/2008 CCF, KOSPAK W11X- 6/8/2008 CCF, KOSPAK W23X- 6/8/2008 CCF, KOSPAK W24X- 6/8/2008 CCF, KOSPAK W29X- 6/8/2008 CCF, KOSPAK W31X- 6/8/2008 CCF, KOSPAK W33X- 6/8/2008 CCF, KOSPAK W37X- 6/8/2008 CCF, KOSPAK W40X- 6/8/2008 CCF, KOSPAK W41X- 6/8/2008 CCF, KOSPAK W42X- 6/8/2008 CCF, KOSPAK W46X- 6/8/2008 CCF, KOSPAK W47X- 6/8/2008 CCF, KOSPAK W64X- 6/8/2008 CCF, KOSPAK W69X- 1) POSITION 1ST & 2ND X REPRESENT FOR HANDLES (AA-ZZ) 2) POSITION 3RD & 4TH X USE ALPHABET TO REPRESENT ESCUTCHEON (AA-ZZ) IF WITHOUT ESCUTCHEON USE "00" TO REPLACE 3) POSITION 5TH & 6TH ALPHABET TO REPRESENT SPOUT (AA-ZZ) ALTERNATED TO MATCH POSITION 1ST & 2ND 4) POSITION 7TH X REPRESENT pop-up 5) POSITION 8TH & 9TH X REPRESENT finish AB: Antique Brass CP: Chrome Plated CB: Chrome/Polished Brass CT: Chrome/PVD GC: Gun Metal/Chrome GM: Gun Metal GT: Gun Metal/Titanium IB: Ivory/Polished Brass IC: Ivory/Chrome IV: Ivory PB: Polished Brass SA: Satin Nickel/Chrome SC: Satin Chrome SE: Satin Chrome/Chrome SN: Satin Nickel ST: Satin Nickel/Titanium TI: PVD 9/3/2010 CCF, KOSPAK WN11X- C2-9/3/2010 CCF, KOSPAK WN11X- W2- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN,EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with AC or AI indicating the escutcheon style. The 5th and 6th can be replaced with PW or PX indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th X is being replaced with 2 indicating the combined pipe style. The 10th and 11th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN23XW- 9/3/2010 CCF, KOSPAK WN23XC- Page 2 of 8
3 The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with CC, CI, CJ, CN, CT, CY or CZ indicating the escutcheon style. The 5th and 6th can be replaced with GA, GF, or GP indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN24XW- 9/3/2010 CCF, KOSPAK WN24XC- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with AC, or AI indicating the escutcheon style. The 5th and 6th can be replaced with PW, or PX indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN26XW- 9/3/2010 CCF, KOSPAK WN26XC- The 1st and 2nd can be replaced with CA, CB, CC, CD, CR, CS, EA, EA, EB, EC, ED, EF, EJ, EL, EN, EP, ER, EW, EX, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, KQ, or LF indicating the handle style. The 3rd and 4th can be replaced with CA, or CL indicating the escutcheon style. The 5th and 6th can be replaced with (Brass AB, AD, or AQ) and (stainless steel SA, SB, or SC) indicating the spout style. The 8th X is being replaced with C or W indicating the combined valve style. The 9th and 10th can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 9/3/2010 CCF, KOSPAK WN41XA- 9/3/2010 CCF, KOSPAK WN41XB- 9/3/2010 CCF, KOSPAK WN42XA- 9/3/2010 CCF, KOSPAK WN42XB- The 1st and 2nd ** can be replaced with IA, IB, IC, ID, IE, IF, IG, IH, II, IJ, IK, IL, IM, IN, IP, IQ, IR, IS, IT, IU, IY, or JC indicating the handle style. The 3rd and 4th ** can be replaced with EA, EE, EH, or EI indicating the escutcheon style. The 5th and 6th ** can be replaced with PL, PM, or PN indicating the spout style. The 7th * can be replaced with A, B or N indicating the combined Pop-up style. The 8th * can be replaced with A or B indicating the combined ball valve style. The 9th and 10th ** can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, 3/6/2009 CCF, KOSPAK WN37X-A- 3/6/2009 CCF, KOSPAK WN37X-B- Page 3 of 8
4 The 1st and 2nd ** can be replaced with VA, TW, TJ, TI, TG, TF or TE indicating the handle style. The 3rd and 4th ** can be replaced with GD, HG, HB and HH indicating the escutcheon style. The 5th and 6th ** can be replaced with (RV, RR and RY) with A body or (PF, PH and PG) with B body indicating the spout style. The 8th X is being replaced with A or B indicating the body style. The 9th and 10th ** can be replaced with AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, GC, GT, SC, and SE indicating the finish "AB": Antique Brass "CP": Chrome Plated "CB": Chrome/Polished Brass "CT": Chrome/PVD "IV": Ivory "IB": Ivory/Polished Brass "IC": Ivory/Chrome "PB": Polished Brass "SN": Satin Nickel "ST": Satin Nickel/Titanium "SA": Satin Nickel/Chrome "TI": PVD "GM": Gun Metal "GC": Gun Metal/Chrome "GT": Gun Metal/Titanium "SC": Satin Chrome "SE": Satin Chrome/Chrome 9/3/2010 CCF, KOSPAK WN29X- The 1st and 2nd can be replaced with CA, CB, CC, CR, EA, EB, EC, ED, EF, EJ, EK, EL, EM, EN, EP, ER, EW, EX, EZ, FC, FE, FF, FG, GA, GB, GC, GG, PB, PF, PH, PK, PN, PR, PT, PU, PX, PZ, QC, QF, QM, QN, QQ, QS, QT, QU, QW, QY, QZ, KR, or LF indicating the handle styles. The 3rd and 4th can be replace with OO for escutcheons. (The 3rd and 4th can be replaced with PA, PE, or PF indicating the escutcheon style with N83B only. The 5th and 6th can be replaced with (Brass CB, or CJ) and (stainless steel SD, or SE) indicating the spout style. The 8th and 9th can be replaced by AB, CP, CB, CT, IV, IB, IC, PB, SN, ST, SA, TI, GM, GC, GT, SC, SE indicting the finish. ADDITIONAL COMPANIES: Banner International, LLC Certification 7/20/2017 BANNER 10X-D 7/20/2017 BANNER 10X-DB 7/20/2017 BANNER 10X-DLP 7/20/2017 BANNER 401 7/20/2017 BANNER 401-GD 7/20/2017 BANNER 401-LP 7/20/2017 BANNER H401 7/20/2017 BANNER H401-GD 7/20/2017 BANNER H401-LP 7/20/2017 BANNER 301 7/20/2017 BANNER 301-B 7/20/2017 BANNER 301-LP 7/20/2017 BANNER 301-M 7/20/2017 BANNER 301-BM 7/20/2017 BANNER 301-LPM Page 4 of 8
5 7/20/2017 BANNER 301-W 7/20/2017 BANNER 301-WB 7/20/2017 BANNER 301-WB-LP 7/20/2017 BANNER 31X 7/20/2017 BANNER 31X-B 7/20/2017 BANNER 31X-LP 7/20/2017 BANNER 181 7/20/2017 BANNER 181-WB 7/20/2017 BANNER 18XHA-CL 7/20/2017 BANNER 181HA-M 7/20/2017 BANNER 181HA-WB 7/20/2017 BANNER C18XHA 7/20/2017 BANNER 191 7/20/2017 BANNER 191-M 7/20/2017 BANNER 19XHA-CL 7/20/2017 BANNER 69X-B 7/20/2017 BANNER 69X-C 7/20/2017 BANNER 69X-X 7/20/2017 BANNER 70XBAR-B 7/20/2017 BANNER 31XCDA-B-CL 7/20/2017 BANNER 31XCDA-LP-CL 7/20/2017 BANNER T21X-B 7/20/2017 BANNER T21X 7/20/2017 BANNER 35X-B 7/20/2017 BANNER 35X-XWB 7/20/2017 BANNER 60X-B 7/20/2017 BANNER 60X-C 7/20/2017 BANNER 60X-X 7/20/2017 BANNER 70X-B 7/20/2017 BANNER 85X-B 7/20/2017 BANNER 85X-C 7/20/2017 BANNER 89X-B 7/20/2017 BANNER 50X 7/20/2017 BANNER 50X-B 7/20/2017 BANNER 50X-GD 7/20/2017 BANNER 50X-LP 7/20/2017 BANNER 55X 7/20/2017 BANNER 55X-B 7/20/2017 BANNER 55X-LP 7/20/2017 BANNER 52X-B 7/20/2017 BANNER 11X-DB 7/20/2017 BANNER 11XCL-B 7/20/2017 BANNER C11X-B 7/20/2017 BANNER 67X-B 7/20/2017 BANNER 67X-C 7/20/2017 BANNER 77X-SB 7/20/2017 BANNER 77X-SWB 7/20/2017 BANNER 95X-B 7/20/2017 BANNER 95X-C 7/20/2017 BANNER 70XWS-B 7/20/2017 BANNER 70XWSK-SB 7/20/2017 BANNER SH52X-B 7/20/2017 BANNER 90X-B Page 5 of 8
6 NOTE: The following finishes are denoted on BANNER faucet models by using these number codes in place of "X" where shown above: 1 = Chrome 6 = Brushed Nickel 2 = Polished Brass 7 = PVD 3 = Antique Brass 8 = Brushed Nickel/PVD 4 = Chrome/Polished Brass Comb. 9 = Vintage Bronze 5 = White/Chrome Comb. NOTE: The above BANNER models are complete with handles or are available with various handle options by placing the following suffix after the above model numbers: A = Acrylic M = Metal handle B = Brass Lever Handle O = Oak Lever Handle C = Ceramic Lever Handle X = Cross Handle CL = Large Contemporary Lever Handle LE = Large Euro Rope Handle E = Euro Rope Handle XW = White Cross Handle L = Contemporary Lever Handle WB = Wristblade Handle NOTE: The above BANNER models are available in various packaging. Faucets are available in show packaging or color boxes unless denoted with the following prefixes before the above model numbers. B = Plain Box Package TP = Trac-Pack Package C = Clam Shell Package WB = White Box Package MH = Manufactured Housing Package Kissler & Co. Inc. Certification 7/13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION Page 6 of 8
7 7/13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION /13/2017 DOMINION Strehl LLC Certification PLL4280--LF PBBA3200--LF PBBL3280--LF PBLA2200--LF PBLL2280--LF LA2200--LF LL2230--LF BA3200--LF BL3270--LF BL3230--LF BL LF PBL3280--LF PLL2280--LF PBLA4200--LF PBLL4280--LF LL LF LL42310-LP--LF LA4200-LP--LF LL4240-LP--LF LL LP-- LF LL4230-LP--LF LL LF LL LF LL4260--LF LL4116-LP--LF Page 7 of 8
8 LL4116B-LP--LF LL4116B--LF LL4119-LP--LF LL4110-LP--LF LA4100-LP--LF LL4120-LP--LF LL4111-LP--LF Finishes -: CP: Chrome Plate AB: Antique Brass GM: Gun Metal IV: Ivory SN: Satin Nickel Page 8 of 8
Effective Date: June Rev. 7/20/2017- Void After: June 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: June Rev. 3/26/2018- Void After: June Product: Plumbing Fixture Fittings File No. 4617
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: May 2018 Void After: May Product: Flexible Water Connectors File No. 5747
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: March 2018 Void After: March 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: May Rev. 1/9/2018- Void After: May Product: Lead Free Plumbing Products File No. 6905
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: not available -Rev. 10/4/2012- Void After: Product: Lead Free Plumbing Products File No. 6371
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
California Lead Plumbing Law Devices and Components
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Manufactured in compliance with NSF/ANSI a
IAPMO esearch and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Table 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
HONDA NO ENGINE DESCRIPTION FULL SET HEAD SET CYL. HEAD CHK-9827SK 061A1-PH A1-PH2-010 CHK-9845SA PR PR3-000
1 A20A ACCORD 2000 1985-ON 1955CC CA5-110 86mm 2 B16A INTEGRA CRX 1991-1595CC CHK-9827SK 061A1-PH4-000 061A1-PH2-010 CHK-9845SA 06110-PR3-000 06111-PR3-000 VHK-9827SK 061A1-PH4-000H VHK-9845SA 061A1-PR3-010H
INSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
CFR Series. Power Inductors OUTLINE FEATURES APPLICATIONS SPECIFICATIONS MITSUMI
CFR Series Coils, Transformers OUTLINE Power inductors for preventing the diffusion of noises generated from power circuits and suppressing noise components coming through the power lines. ø8.7 ø11 max.
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices. Orifice plate with annular chambers. 4/358 Siemens FI
Application Dimensional drawings Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -60 to +550 C. Design Two support rings with replaceable orifice disk
APPENDIX A Instruction Set. Op Code. T states Flags Main Effects. Instructions
APPENDIX A 8085 Instruction Set Instructions ACI byte CE 7 ALL A A + CY + byte ADC A 8F 4 ALL A A + A + CY ADC B 88 4 ALL A A + B + CY ADC C 89 4 ALL A A + C + CY ADC D 8A 4 ALL A A + D + CY ADC E 8B 4
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
Overload Relays. SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A for standard applications. 5/78 Siemens IC Overview
SIRIUS 3RU2 Thermal Overload Relays 3RU2 up to 40 A Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors.
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
Genuine Metaris Gear Product Technical Catalog. Pumps & Components - MH Series Bearing & Bushing Style
Genuine Metaris Gear Product Technical Catalog Pumps & Components - MH Series Bearing & Bushing Style www.metaris.com MH365 Series Bushing Pump Features Metaris Bushing Pumps & Motors are available in
SAMYANG ELECTRONICS SMBJ SMBJ440CA TRANSIENT VOLTAGE SUPPRESSOR. Features. Mechanical Characteristics
SAM YANG SAMYANG ELECTRONICS TRANSIENT VOLTAGE SUPPRESSOR BREAKDOWN VOLTAGE: 5.0 --- 440 V PEAK PULSE POWER: 600 W SMB (DO-214AA) Features Working peak reverse voltage range 5.0V to 440V. power dissipation
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS. Automotive Seals VW BARNWELL THE SEAL OF APPROVAL
ROTARY SHAFT / OIL SEALS GASKETS LINER RINGS REPAIR KITS BONDED SEALS O RINGS Automotive Seals VW BARNWELL THE SEAL OF APPROVAL QUALITY AND SERVICE GUARANTEED Total Sealing Solutions Founded in 1972, M
SMB5.0A(CA) - SMB440A(CA)
SMB5.0A(CA) - SMB440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Mechanical Data Glass Passivated Die Construction Uni- and Bi-Directional Versions
CROSS REFERENCE LIST AIRTEX
AIRTEX E10007 7.21659.72 E10008 7.21659.72 E10009 7.21287.53 E10200M 72 200 00 E10201M 73 006 01 E10202M 73 010 00 E10202M ESS 273 E10203M 73 014 01 E10204M 73 068 00 E10205M 73 080 01 E10206M 73 080 02
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
7. Are you upgrading a complete engine from a TCM/ Bendix to a Slick system? If yes, purchase a complete Slick Ignition Upgrade Kit.
1.1 PRODUCT APPLICATION INFORMATION WORKSEET The following information will aid you in selecting the correct magneto, upgrade kit, or ignition harness: 1. Engine Manufacturer 2. Engine Model Number 3.
Effective Date: June 2017 Void After: June Product: Ceramic Plumbing Fixtures File No. 1744
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: February Rev. 7/11/2018- Void After: February Product: Plumbing Fixtures (Lavatories) File No. 3006
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
AUMINUM EECTROYTIC CAPACITORS RAIA EA TYPE PART NUMBER SYSTEM ( Ⅰ ) Series Rated Voltage Capacitance Tolerance ead orming Type ead ength Case imension Special Request (1) (2) (3) (4) (5) (6) (7) (8) (1)
FIELD CONNECTIONS MODEL YK CHILLERS (STYLE F AND G) WITH VARIABLE SPEED DRIVE
Supersedes: 160.54-PW6 (513) Form 160.54-PW6 (816) WIRING DIAGRAM CONTRACTOR ORDER NO. YORK CONTRACT NO. YORK ORDER NO. FIELD CONNECTIONS MODEL YK CHILLERS (STYLE F AND G) WITH VARIABLE SPEED DRIVE PURCHASER
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
Tamil Nadu Public Service Commission
ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
CLOGGING INDICATORS SUMMING-UP DESCRIPTION
SUMMINGUP CLOGGING PRESSURE FILTERS Pressure gauges Pressure switches Differential, visual Differential, electrical Differential, el. + LED Differential, el. + thermostat Differential, el. + visual Differential,
PRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
RM/900/M Heavy duty cylinders Ø 1 1/4... 4
Heavy duty cylinders Ø 1 1/4... 4 Heavy duty cylinder ideal for a wide range of rail applications Extensive range of mountings Rugged, reliable long established design Magnetic piston as standard Mounting
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
Steering Ready Kit Installation Guide
Fits Case IH STX and New Holland T9000 Models: 275 325 425 500 T9020 280 330 430 530 T9030 335 435 535 T9040 375 440 T9050 380 450 T9060 385 480 485 Steering Ready Kit Installation Guide Kit: EDX-SR-CSTX,
PRA/822000/M, PRA/ Smoothline cylinder Magnetic or non-magnetic piston, double acting
P/822000/M, P/822000 Smoothline cylinder > 32... 00 mm > Cylinder and mounting conform to ISO 5552 > eed or solid state switches can be mounted flush with the profile barrel > lternative air ports as standard
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
djangoproject.com skillsapp.com for invite)
DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
PL-0115-FCTACC Faucet Accessories
PL-0115-FCTACC Faucet Accessories s Effective January 5, 2015 SHOWER DIVERTERS POPUPS & P.O. PLUGS DV841 DV841S DV843S LEVER HANDLE DIVERTER VALVE - BRASS LEVER HANDLE DIVERTER VALVE - BRUSHED PUSH PULL
Automated Steering Kit Installation Guide
Fits Buhler Versatile and New Holland Tractor Models: 2270 9280 9282 9184 2290 9480 9482 9384 2310 9680 9682 9484 2335 9880 9882 9684 2360 9884 2375 2425 Read and Follow Safety Messages Automated Steering
Control Units Ex e Glass Fiber Reinforced Polyester
Features Assembly Glass fiber reinforced polyester (GRP) enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de, Ex ib and Ex tb Up to 4 operators per control unit, base-mounted contact
. ;\ cc AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Tie rods cylinders to ISO standard Ø
Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562
SMB. Features. Mechanical Characteristics. Maximum Ta=25 unless otherwise specified. Peak Pulse Power Dissipation by10/1000μs Test Waveform
KLS5-SMBJ Features SMBJ Series *600W peak pulse capability at 0/000μs waveform *IEC 6000-4-2(ESD) 5Kv(air), 8kV(contact) *Quick response to surge voltage *Excellent clamping capability *Typical failure
SSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
SMA6J5.0A(CA) - SMA6J440A(CA)
SMA6J5.0A(CA) - SMA6J440A(CA) SURFACE MOUNT TRANSIENT VOLAGE SUPPESSOR DIODE VOLTAGE RANGE: 5.0-440 V POWER: 600Wa t t s Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available
~... se_rv_ic_e M_A_NU_AL_2_44_4._z1,~
WABCO... se_rv_ic_e M_A_NU_AL_2_44_4._z1, DN-11 DC NEUTRAL RELAYS PARTS LIST This service manual provides parts lists for 4-, 6-, 8-, and IO-point DN-11 DC Neutral Relays. Included in this Parts List is
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
GROUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Con
GRUP SIX Mficoticari Emoteq Division MF Series Torque Motors - Thin Ring Design - Direct Drive eliminates backlash - Extremely low cogging torque Contact Us! Email Purchase Source: GRUP SIX () Te,4,2t
Delta Power Company 4484 Boeing Drive - Rockford, IL 61109
VALVE CATALOG MAIN INDEX RELEASED DATE: JUNE 03. QUICK SELECTION GUIDE Page SOLENOID OPERATED DIRECTIONAL CONTROLS (See ENGINEERING DATA for coil specs) Page 7 MECHANICAL DIRECTIONAL CONTROLS Page 5 PRESSURE
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
MCC SMBJ5.0 THRU SMBJ440CA. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt. Mechanical Data
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ440CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Multiplication Tables of Various Bases
THE NUMBER BASE 10 100 Ternary (Base 3) 1 2 10 2 11 20 10 20 100 Quaternary (Base 4) 1 2 3 10 2 10 12 20 3 12 21 30 10 20 30 100 Quinary (Base 5) 1 2 3 4 10 2 4 11 13 20 3 11 14 22 30 4 13 22 31 40 10
MCC omponents Itasca Street Chatsworth
omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
Order No. of the options EMC filter Class A
Ordering Data for Variant Dependent Options The options listed here (filters, chokes, brake resistors, gland plates, fuses and circuit breakers) are inverter specific. The inverter and the associated options
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
M C C SMBJ5.0AHE3 THRU SMBJ440CAHE3. Features. Transient Voltage Suppressor 5.0 to 440 Volts 600 Watt
omponents 20736 Marilla Street Chatsworth!"# $%!"# SMBJ.0AHE3 THRU SMBJ440CAHE3 Features For surface mount applicationsin order to optimize board space Lead Free Finish/Rohs Compliant (Note) ("P"Suffix
PARTS LIST CHAIN SAW G2000T
848C0593B0 (007) PARTS LIST CHAIN SAW G2000T NOTE : 1. Use genuine parts specified in the parts list for repair and/or replacement. 2. Does not warrant the machines, those which have been damaged by the
Steer Ready Kit Installation Guide
Fits CaseIH Tractors: Puma 130 Puma 200 Puma 145 Puma 215 Puma 160 Puma 230 Puma 170 Puma 185 Steer Ready Kit Installation Guide Kit: EDX-SR-CPuma, P/N 911-3016-000 Read and Follow Safety Messages In these
REF : 30XA1502 STD UNIT MODULE1:CKTA,CKTB MODULE 2:CKTC
Carrier s.a. BP 49 Route de Thil 01120 Montluel(FRANCE) Tel: 33 (0) 4 72 25 21 08 Fax : 33 (0) 4 72 25 23 88 REF : 30XA1502 STD UT MODULE1:CKTA,CKTB MODULE 2:CKTC LISTE DE PIECES SPECIFIED PARTS LIST DATE
P1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x
Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m
SELECTION LIST REVISION This book contains the following models: Chevy/GMC Dodge Ford
SELECTION LIST ---------- REVISION 0 ---------- This book contains the following models: 1973-2002 Chevy/GMC 1994-2002 Dodge 1980-2002 Ford Form #64135-120102 WESTERN PRODUCTS P.O. BOX 245038 MILWAUKEE,
H:\SC218\17_Ersatzteile\Spare Parts SC 218.doc
page 1 / 14 Version: V2016-07 2,2a 3 4 5 6 7 8 13 Air bleeder 9 12 Flow switch 1 10 11,11a page 2 / 14 Version: V2016-07 description electrical item 1 ball valve (drain and fillin valve red handle bar)
CERTIFICATE VO SAMPLE PREPARATION ANALYTICAL PROCEDURES. Signature: Colin Ramshaw, Vancouver Laboratory Manager
Page: 1 CERTIFICATE VO14023942 P.O. No.: KL 000348 This report is for 2 Drill Core samples submitted to our lab in Val d'or, QC, Canada on 18-FEB-2014. The following have access to data associated with
Selection. Radiator Caps. Recovery Caps (double seal) Non Recovery Caps (single seal) Pressure Rating. Safety Lever Radiator Caps. Pressure Conversion
Radiator Caps The Tridon radiator cap range has been developed to operate within original equipment manufacturer s specifications. Photographs and technical specifications are shown for each Tridon part
CERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
SIRIUS 3RU2 Thermal Overload Relays
Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Stud Welding Products,Inc
Stud Welding Products,Inc ACCESSORIES CATALOG L 3-7/8 3- B-4N/B- 3/8 1-2- www.studweldprod.com Info@studweldprod.com.com Los Angeles, San Francisco, Phoenix, Seattle Phone: (800) 252-1919 Studs Since 1981
SITRANS F flowmeters. SITRANS F O delta p - Primary differential pressure devices Metering pipe with orifice plate and annular chambers 4/369
and annular chambers Application Suitable for non-corrosive and corrosive gases, vapors and liquids; permissible operating temperature -10 to +00 C. Design Orifice plate with annular chambers consisting
issued by Notified Body No according to 2014/32/EU MID FULL QUALITY ASSURANCE Module H
This certificate may not be reproduced other than in full, except with the pri written approval by RISE Certification. issued by Notified Body No. 040 accding to 014/3/EU MID FULL QUALITY ASSURANCE Module
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
QT-360 CHRYSLER " MAIN 4.00"STROKE STOCK OE ROD 6123 $ QT-455O OLDSMOBILE " MAIN 4.25" STROKE STOCK OE ROD 6735 $ 330.
ITEM NO. DESCRIPTION ROD PRICE ** Notice** All cast cranks are to be discontinued when sold out. Replace only for defectives! No returns. CRANKSHAFT- NODULAR IRON 80-60-06 QT-442 GMC 350 STOCK 3.480" STROKE
CERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
ST JOHN HE BA IST PARISH
se AP s Yr cous T Natalie Robottom Parish President ST JOHN HE BA IST PARISH office of the Parish President October 13 2010 Baton Rouge Winwater Works Scott Frazier 8940 Buzbee Dr Baton Rouge La 70809
DATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
GUIDELINE (ROLLER SHADE) COMPONENTS APRIL 2018
GUIDELINE CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-GL-XX R-CL8-GL-XX R-CL8-1.5-GL-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent
PRA/882000/M/EX, IVAC Clean Line cylinder Magnetic piston, double acting
> ø 3... 100 mm > Complete functional unit with LED display > TEX-zones depending on pilot control: zones &, II 3GD, Valve control module (VCM) zones 1 & 1, II GD, Pilot control on separate specification
PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
Linear Guides Series OSP-P
Linear Guides Series OSP-P NEW NEW Contents Description Data Sheet No. Page Overview.4.E 3-3 Plain bearing guide SLIDELINE.4.E 33-34 Roller guide POWERSLIDE.4.3E 35-38 Ball bushing guide GUIDELINE.4.4E
SPARE CONNECTORS 2008
SPARE PARTS MANUAL ART.NO.: 3208201 ENGLISH INDEX SPARE CONNECTORS AA-AR SPARE CONNECTORS AS-BK SPARE CONNECTORS BL-BZ SPARE CONNECTORS CA-CP 1x 2x 3x 4x SPARE CONNECTORS CQ-DM SPARE CONNECTORS DN-EL