2017 Ex-Süd/Nord/WiA / englisch / 0037 / Liefer-E / August 2013

Transcription

1 Price List 2017

2 Complete range General information Selling prices for specialist dealers.valid from 1 January Nonbinding recommended unit sales prices. Excluding Value Added Tax. Subject to technical change without prior notice. Wilkhahn is certified according to Quality Management System DIN EN ISO 9001, Environmental Management System DIN EN ISO FF. We reserve the right to deviate from illustrations or descriptions of models. Complaints, which prove to be based on changes due to product improvements or technical progress, cannot be accepted. In addition to standard versions of table ranges, customized options are also available. Forms, dimensions, surface finishes and prices on request. Add-on elements: the left or right sides are always as seen by the person seated. Finishes Veneered table tops and wooden frames of seating ranges are protected with low-solvent, water-based lacquer. Coloured metal surfaces are powder-coated, free from heavy metal. Upholstery All types of upholstery foam used are manufactured CFC-free. Key to symbols Seat height Overall height Width Depth Veneer direction as seen by the person seated Concealed lipping Visible lipping The height of the seat has been determined under load conditions using DIN testing equipment. Overall height, width and depth conform to the minimum dimension requirements. To see them more clearly some of the accessories are shown slightly larger. D Important information / typical product characteristics Shine Shine refers to impressions on the cover which can occur due to pressure, body heat and moisture. The form in which it manifests itself depends on the model, cover and upholstery technique and it is one of the characteristics of the design concerned. Therefore it is not a sign of poor quality. Leather production Leather is a natural product. Each leather hide is unique. Insect bites, chafed areas or scars are part of the hide s history. They indicate the natural aspect and high quality of the material and are therefore not recognised as a justified cause for complaint. Wood Wood is a natural product. In our product ranges, we only use very carefully selected, high-quality wood and genuine-wood veneers. Typical characteristics like knots are signs of natural growth. Because each tree trunk is a one-off, differences in the pattern and colour are possible. The unique surface characteristics of wood are down to nature and therefore not considered reasons for complaints. Indoor and outdoor furniture The models are suitable for outdoors. Nevertheless, we recommend not overexposing this furniture to the effects of sun, rain, dust and wind and to keep it in a dry and well-aired place when not using. Differences in colour / structure The combination of different materials, such as chrome plating, or varnishing aluminium, steel or plastic can lead to differences in the colour and structure when the surfaces are compared. These differences do not constitute grounds for complaint.

3 Upholstery material 35 / Fiberflex 100% Polyester 510 g/lin. m, width 160 cm (63") Abrasion: 70,000 rubs, BS EN ISO (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E EN when covering CMHR-foam density min. 35 kg/m³ EN when covering CMHR-foam density min. 50 kg/m³ periodical vacuum cleaning, professional cleaning with dry foam 37 / Racer 100% polyester 440 g/lin. m, width 170 cm Abrasion: 90,000 rubs, BS EN 14465, BS EN ISO (Martindale) Lightfastness: 5-7, BS EN ISO 105-B02 method 2 Pilling: 4-5, BS EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame retardancy: CAL 117 E BS 476 Part 7, ASTM E 84, EN ISO EN if mounted on CMHR foam at least 35 kg/m³ EN if mounted on CMHR foam at least 50 kg/m³ Vacuum it regularly and have it dry cleaned. 41 / Form-fit knit (Formstrick) 100% hybrid polyamide Weight: 750g/m² Abrasion: 100,000 rubs, DIN EN ISO (Martindale) Lightfastness: 6, DIN EN ISO 105-B02 method 2 Pilling: 5, DIN EN ISO Fastness to rubbing: Dry 5, wet 5, DIN EN ISO 105-X12 Flame retardancy: On request Vacuum it regularly and have it dry cleaned. If it s very damp, the elasticity of the form-fit knit (Formstrick) can slacken, but will regain its original shape when it dries. 47 / Nova 100% Polyester 560 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, DIN EN ISO (Martindale) Light fastness: 5-7, DIN EN ISO 105- B02 Method 2 Pilling: 5, DIN EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105 X12 Flame resistance: CAL 117 E EN when covering CMHR-foam density min. 22 kg/m³ EN when covering CMHR-foam density min. 36 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 54 / Pitch 100% Trevira CS 470 g/lin. m, width 140 cm (55") Abrasion: 100,000 rubs, BS EN ISO (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E DIN B1 NF P M1 ÖNORM A B1/Q1/TR1 BS 5852 when covering CMHR-foam EN /-2 when covering PURfoam density min. 30 kg/m³ UNI VF IM when covering CMHR-foam Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 60 / Blend 100% wool 600 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, BS EN ISO (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 3-4, BS EN ISO Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E BS 5852 when covering FR-foam BS 7176 low hazard when covering CMHR-foam density min. 35 kg/m³ BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³ EN /-2 when covering CMHRfoam density min. 35 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 62 / Bond 100% Trevira CS 480 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 100,000 rubs, BS EN ISO (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E DIN B1 NF P M1 ÖNORM A B1/Q1/2 BS 5852 when covering CMHR-foam EN /-2 when covering PURfoam density min. 30 kg/m³ UNI VF IM when covering CMHR-foam periodical vacuum cleaning, professional cleaning with dry foam 63 / Auris 100% wool 520 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, BS EN ISO (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E BS 5852 when covering CMHR-foam 35 kg/m³ EN /-2 when covering CMHRfoam density min. 35 kg/m³ UNI 9175/FA1 IM when covering FRfoam density min. 35 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: Wilkhahn does not offer any guarantee for those fabrics and leather supplied that are from manufacturers with whom Wil A sample of upholstery materials (minimum size A 4) must be supplied in advance to allow them to be checked with regard

4 66 / Lona 85% wool, 15% polyamide 520 g/lin. m, width 140 cm (55") Abrasion: 150,000 rubs, DIN EN ISO (Martindale) Light fastness: 5-7, DIN EN ISO 105-B02 Method 2 Pilling: 4, DIN EN ISO Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105-X12 Flame resistance: CAL 117 E ÖNORM A Q1 ÖNORM B 3852 flame retardant when covering PUR-foam B2 BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³ EN /-2 when covering PUR-foam density min. 22 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 67 / Miro 65% new wool, 31% hemp, 4% polyamide 610 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 60,000 rubs, BS EN ISO (Martindale) Light fastness: 5-7, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E EN /-2 when covering PUR-foam density min. 22 kg/m³ periodical vacuum cleaning, professional cleaning with dry foam 69 / Granit 50% wool, 50% cotton 750 g/lin. m, width 138 cm (54") yarn dyed Fastness to rubbing: approx. 45,000 rubs, DIN EN ISO (Martindale) Light fastness: 5-6, DIN EN ISO 105-B02 Method 2 Pilling: 4-5, DIN EN ISO Fastness to rubbing: Dry 4-5, wet 4, DIN EN ISO 105-X12 Flame resistance: CAL 117 E DIN P-c when covering PUR-foam B3 density min. 22 kg/m³ EN /-2 when covering PUR-foam B3 density min. 22 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 74 / Leather Furniture-quality cowhide with tolerances regarding colour and structure, compliant with DGM, RAL GZ 430 Test results Light fastness: 6-7, DIN EN ISO 105-B02 Method 2 Flame resistance: California TB 117 E BS when covering PUR-foam density min. 22 kg/m³ EN /-2 when covering PUR-foam density min. 22 kg/m³ Cleaning Remove dirt or stains with a damp, absorbent cloth and immediately rub over the surface with a dry woollen cloth. 87 / Leather Finest, pure aniline dyed cowhide that exhibits some natural characteristics or may develop patina over time. Light fastness: >3 based on DIN EN ISO 105-B02 Flame resistance: DIN and DIN EN 1021 parts 1 + 2, CE 117 E Remove dirt or stains with a damp, absorbent cloth and immediately rub over the surface with a dry woollen cloth. C2 24% Polyester, 22% flax/linen, 20% viscose, 20% polyacrylic, 8% wool, 6% cotton 720 g/lin. m, width 132 cm (52") Abrasion: min. 35,000 rubs, BS EN ISO (Martindale) Light fastness: 4-5, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO Fastness to rubbing: Dry 4, wet 3/4, EN ISO 105-X12 Periodical vacuum cleaning, professional cleaning with dry foam C3 65% wool, 20% polyamide, 15% alpaca588 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 100,000 rubs, BS EN ISO (Martindale) Light fastness: 4-5, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO Fastness to rubbing: Dry 4-5, wet 3/4, EN ISO 105-X12 Fixed covers: Periodical vacuum cleaning, professional cleaning with dry foam Removable covers: khahn does not have a supply agreement. to workability.

5

6 Price List 2017 Contents by range 170 range ON NEW range Neos NEW range IN NEW range Metrik NEW range Stitz range Stand-up range FS-Line NEW range FS Management range Occo NEW range Aline range Sito 64 3

7 249 range Cura range Modus Basic NEW range Modus Compact NEW range Modus Medium range Modus Executive Sola Graph range Graph range Chassis 106 4

8 361 range Ceno range Confair range tables Contas range Concentra Conversa range tables Timetable 146 NEW 620 range tables Logon 166 NEW 632 range tables range tables Palette NEW 194 5

9 660 range Travis range Travis height-adjustable range Cubis range Velas range Asienta range Cana 238 Quickship 240 Built-in component sets 246 Edging matrix 255 6

10 Contents in alphabetical order 632 range tables 192 Aline 230 range 54 Asienta 860 range 234 Built-in component sets 246 Cana 890 range 238 Ceno 361 range 108 Chassis 340 range 106 Concentra 544 range 134 Confair 440 range 112 Contas 540 range tables 130 Conversa 600 range 140 Cubis 830 range 228 Cura 249 range 68 Edging matrix 255 FS-Line 21 range 38 FS Management 21 range 44 Graph 30 range 88 Graph 300 range 92 IN 184 range 28 Logon 620 range tables 166 Metrik 186 range 32 Modus Basic 26 range 70 Modus Compact 27 range 72 Modus Medium 28 range 78 Modus Executive 28 range 82 Neos 180 range 22 Occo 222 range 46 ON 170 range 10 Palette 640 range tables 194 Quickship 240 Sito 240 range 64 Sola 290 range 86 Stand-up 202 range 36 Stitz 2 20 range 34 Timetable 610 range tables 146 Travis 660 range 222 Travis height-adjustable 661 range 226 Velas 850 range 232 7

11 Environmental information Wilkhahn & sustainability In over 100 years of its corporate history, Wilkhahn can look back on a sustainability philosophy that has grown over decades. Aspects such as durability, social fairness, environmental responsibility and cultural orientation have been evolving as corporate principles since the 1950s. Wilkhahn today is regarded internationally as a model of excellence, not only on account of its products but also because of its modern corporate philosophy. This is because the company realised early on that sustainable design should embrace environmental aspects, improve social relationships and define the cultural role of a company. This approach to the way we do business creates a bond between us and our customers throughout the world. There is surely no more rewarding task than working together for a successful future that is worth living in. Corporate principles Honest product design We strive to develop durable products, increase their utility value and reduce waste. Less is more or reduce to the max are principles that Wilkhahn constantly reinterprets for the future. Ecologically driven design principles are a natural, integral part of product development at Wilkhahn. A spirit of fairness Wilkhahn applies a spirit of fairness towards its employees, partners and customers. This means providing first-class analyses, information, advice, management and support. In the company itself we embrace a collaborative management style which sees employee representatives as co-managers who help shape the company. Fairness and continual improvement in working conditions also apply to the supply chains. To achieve these aims Wilkhahn has signed an international agreement on fostering employee rights. Ecological responsibility Wilkhahn supports sustainable development. The balance we seek to strike between financial, ecological, social and cultural objectives in order to maintain independence defines Wilkhahn s corporate culture. Compliance with ecological quality criteria throughout the product life cycle is one of the ways we gauge our own success. Employees as partners Top performance requires a potential-driven style to the way we organise our company, with flexible working hours, a bonus scheme, and group and project work. In turn, all employees share in corporate success in material terms. They enjoy a comprehensive pension plan and an employee-focused health programme. And thanks to pioneering measures regarding the architecture of their surroundings, they work in an environment that reconciles social, ecological, economic and aesthetic requirements. Sustainability policy UN Global Compact Wilkhahn joined the United Nations Global Compact initiative in The company commits itself to the ten principles of Global Compact regarding the protection of international human rights, adherence to labour standards and rights for employees, the protection of the environment and anti-corruption, all of which are specified as binding corporate policy. ISO 9001 quality management system In order to safeguard and continually optimize the high quality of products and processes, a comprehensive quality management system was set up as early as Since then it has been certified for compliance with the ISO 9001 Quality Management Standard of the International Standardization Organization. Quality management is all about customer focus, management responsibility, the participation of all employees involved, ensuring and improving process safety and supplier relations. ISO environmental management system In addition, Wilkhahn is certified in accordance with the international ISO environmental management standard. This is the international Environmental Management Standard which sets out internationally recognised specifications for an environmental management system, such as reducing ecological footprints and evaluating environmental data and environmental performance. EMAS EMAS is the acronym for EcoManagement and Audit Scheme, developed by the European Union. As a combined environmental management and auditing system, its purpose is verify companies are improving their environmental performance. At the north German headquarters in Bad Münder Wilkhahn has been regularly certified based on the latest version of EMAS since In the environmental statement, confirmed by annual audits, Wilkhahn gives a public account of the company s environmental performance. The printed version of the environmental statement can be ordered at service/mediacenter-cad-files/ Detailed ecological product information on each of the products is also available to download. D FSC The Forest Stewardship Council (FSC) quality label indicates compliance with stringent socio-economic requirements in terms of forest management and trading wood products. Wilkhahn s Bad Münder headquarters meet the criteria of the Forest Stewardship Council (FSC) and are entitled to process and sell FSC -certified products (licence code C118389, certificate no. TUEV-COC ). 8

12 Product certification Wilkhahn office ranges are not only certified according to international testing and inspection standards regarding product safety and functional integrity. They also meet all key international reference systems for highly health-compatible and environmentally friendly products. GREENGUARD Virtually all Wilkhahn ranges undergo GREENGUARD testing and certification. The Greenguard Environmental Institute is an independent institution in the US that primarily certifies products with regard to their suitability for interiors. Besides environmental aspects, special focus is placed on ensuring that products do not emit any pollutants that might be harmful to health. LEED Leadership in Energy and Environmental Design (LEED) is a rating system used by the US Green Building Council to evaluate the environmental and social compatibility of buildings. LEED certification awards extra credit points if Wilkhahn office chair and table ranges are used. Green Star Green Star is an extensive, voluntary rating system developed by the Australian Green Building Council. The system assesses how ecological a building s design is. The system uses various categories to rate any potential ecological impact resulting from a location chosen for a project, the way the project is carried out, managed or its design. Environmental Product Information sheets, as well as classifications regarding LEED and Green Star, are listed under the product ranges concerned and can be downloaded at Responsibility from the very start In the design and development process, ecological impact is also taken into consideration in addition to design, functional and businessrelated aspects. Because these factors play a pivotal role in the materials chosen, manufacturing processes, options regarding assembly, logistics and transport and how easy products are to repair or recycle. This overview shows the key aspects for the entire product life cycle that currently apply at Wilkhahn. Materials The materials used are subject to stringent controls. Prohibited chemicals are not used in our products at all. All feedstock is listed in a register of hazardous substances. This helps to minimise the use of or substitute any potentially harmful materials. With the goal being to achieve maximum durability and quality, some recycled materials are used in the production of Wilkhahn ranges. This applies in particular to metals like steel and aluminium. Production Water conservation, waste management and sustainable energy production Water is becoming an increasingly important resource. Wilkhahn spares no effort in minimizing water consumption in all areas. By treating process water, recycling and using state-of-the-art varnishing machinery, no waste water is produced that requires monitoring. The Wilkhahn waste management concept includes sorting waste selectively, as well as recycling and disposing of all waste fractions resulting from the production and management departments. The continual decrease of energy consumption is an important goal of the environmental management system. A combined heat and power plant and connection to a biogas plant at the Bad Münder site have more than doubled energy efficiency. As a result, heating at the headquarters and production facilities is CO 2 neutral. Wilkhahn production sites Wilkhahn products are manufactured or assembled in Bad Münder (Germany), Castellón (Spain) and Sydney (Australia). The branch facilities and the international subsidiaries are not only subject to quality management requirements, but also to guidelines for the socio-ecological focus of corporate policy which apply through the entire company. Product use Aesthetics and design Products are sustainable if they serve a purpose. The timeless design of the Wilkhahn ranges also means they are useful, intuitive to operate and the materials are durable. A standard that is reflected in every single detail. The Wilkhahn design approach therefore results in an increase in the utility value of a product that is destined to last. Durability and guarantee The ranges set standards for product design that is sustainable in the best possible sense of the word. The durability of the high quality materials, the innovative functionality and the traditional, understated design guarantee our furniture will last for decades. We give a twoyear manufacturers guarantee, allowing customers to plan reliably. An issue we feel responsible for, regardless of our products long useful lives. We consider guarantees way beyond these periods as selling the future short. Our services to extend the ecological life of the furniture include maintenance as well as an overhaul of older ranges. Wilkhahn guarantees it will carry out repairs on discontinued furniture for at least two years after production has ceased. End of the product life-cycle Return of used products and recycling Even after the product has reached the end of its life, we still feel responsible and offer our customers extensive take-back and recycling services. We guarantee to take back all products that are no longer in use. Wilkhahn products are dismantled in the factory, all parts are selectively sorted in terms of their inherent materials and then recycled. By labelling the materials, ensuring they re non-toxic and easy to dismantle, we re already making sure today that the components in Wilkhahn products can be incorporated into local material and production cycles and be properly recycled and disposed of. Disassembly and recycling Most of Wilkhahn s product components are suitable for non-destructive disassembly. To ensure that materials can be sorted according to type, all components weighing more than 150 g have been labelled accordingly. No agents to protect materials or organic halogen compounds are used which would prevent subsequent recycling. 9

13 170 range ON Design: wiege Technical details Function Task chairs with Trimension, synchronous, three-dimensional kinematics that encourages three-dimensional dynamic sitting. The coordinated interaction of the synchro-adjustment mechanism, seat and back automatically adapts to the user whatever the posture or motion involved. The supporting counter pressure is quickly and precisely adjustable in any direction (a max. of 4.5 rotations) for people weighing from 45 to 120 kg. Backrest height adjustable by up to 60 mm in six lockable positions. Backrest and seat can be locked in the front sitting position. The seating height is precisely adjustable between 400 mm and 520 mm with a DIN 4550-compliant gas lift. All models are optionally available with seat-depth extension of 400 to 450 mm. Conference and visitor chairs with Trimension, on request with swivelmounted column not height adjustable, alternatively as a four-leg type or cantilever chair, optionally stackable. Frame Task chairs and counter stools Five-star base, optionally with black, through-dyed plastic, or diecast aluminium, coated (black or black textured matt finish), or silver (silver satin finish), polished or bright chrome-plated. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN as the standard version for carpets; with grey polyurethane tyre for hard floors. Castors optionally electrically conductive. Mechanism cover made of die-cast, shot-blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black, through-dyed polypropylene. Gas lift covered by telescopic protective tube made of black through-dyed polypropylene. Counter stool with extra height-adjustable foot ring, bright chromeplated, with lock screw to affix it and twin wheel swivel castors with load-dependent braking. 24-hour chairs All have an die-cast aluminium star base with extra swivel arm supports, with adapted mechanics and exceptionally hard-wearing covers from Wilkhahn s fabric and leather collection. Designed for people weighing up to 120 kg, the models consequently comply with the DIN EN 1335 standard requirements for 24-hour use. Conference/visitor chairs Four-star, die-cast aluminium base, coated (black or silver satin finish), polished or bright chrome plated. Black, multi-purpose glides made of plastic for all types of flooring. Swivel arms made of die-cast aluminium, coated (black or black textured matt finish or silver satin finish), polished or bright chrome plated. Mechanism cover made of die-cast, shot-blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black, through-dyed polypropylene. Gas lift covered by telescopic protective tube made of black through-dyed polypropylene. Cantilever chairs Frame made of bright, chrome plated tubular steel, 22 mm in diameter, with anti-tilt stopper made of black polyamide as the standard version for carpeting, with extra glides for hard flooring, with felt inserts on request. Four-leg visitor chair Frame made of bright chrome-plated tubular steel, legs 22 mm in diameter. Models 176/7 and 176/71 with multi-purpose glides made of POM (polyoxymethylene) in black for soft and hard floorings, or models 176/8 and 176/81 (not stackable) with load-dependent braking twin wheel swivel castors made of black polyamide DIN EN compliant as the standard version for carpeting; with grey tyre made of polyurethane for hard flooring. Seat Task, visitor and conference chairs Highly elastic, flexibly suspended seat shell with seat upholstery panel made of black, through-dyed polypropylene, polyurethane seat cushion covered in the same material as the backrest cover in Fiberflex, or fabric. Seat can be replaced. All models except for those with management grade upholstery optionally available with extra padding (with additional cut foam fleece). In models with management grade upholstery (174/71, 175/71, 171/71) seat cushion with extra padding and side facings, optionally also in leather. Optionally with seat-depth extension from 400 to 450 mm (all types with upholstery). Task chair models 174/7, 175/7, 174/71, 175/71 optionally with a constant and comfortable tilt of 6 degrees. Backrest 3D armrest Flexframe Swing plate Seat Seat bearer Button/knob Mechanism cover 10

14 Back Task, visitor and conference chairs Elastic back frame, height adjustable by 60 mm in six lockable positions, made of through-dyed, fibreglass-reinforced polyamide, covered with Fiberflex, optionally also with fabric (and extra padding). All models except for those with management grade upholstery optionally available with extra padding (with additional cut foam fleece). In models with management grade upholstery (174/71, 175/71, 171/71) backrest upholstery optionally with additional padding, front of backrest also with concealed, cut foam fleece sewn into the cover and with side facings, optionally with leather cover. All models except for those with management grade upholstery optionally available with extra padding (with additional cut foam fleece). Medium-high and high backrest, high backrest optionally with headrest (height 16 cm), either in the same material as the backrest cover, or covered in leather on the front. Back can be replaced. Seat and back Cantilever/ four-leg visitor chair Unitary shell-frame design made of through-dyed, fibre-glass-reinforced polypropylene. Seat cushion made of polyurethane one-piece moulded foam, in models with management grade upholstery (models 176/71, 178/71) with additional padding and side facings. All models except for those with management grade upholstery optionally available with extra padding (with additional cut foam fleece). In models 176/7, 178/7 seat cushions covered in the same material as the backrest cover in Fiberflex or fabric, in models 176/71 and 178/71 with management upholstery optionally also in leather. Seat can be replaced. In models with management grade upholstery (176/7 and 178/7) optionally with backrest upholstery in fabric or leather, with additional padding. Models with management grade upholstery (176/71 and 178/71) optionally with backrest cushioning in fabric or leather, with extra padding as well as cut foam fleece sewn into and concealed in the cover and side facings, backrest cover replaceable. Armrests Task chairs 3D armrests made of fibreglass-reinforced, black through-dyed polyamide. Armrest pads made of black, through-dyed polyurethane (TPU), optionally also made of polyurethane foam and covered in leather if desired. Armrest covers made of black, through-dyed polypropylene. Height of armrests adjustable by 100 mm (eight lockable positions), depth by 40 mm, can be swivelled 30 inwards and outwards in each case. Conference/visitor chairs Rigid armrests made of fibreglassreinforced, black, through-dyed polyamide. Armrest pads made of black, through-dyed polyurethane (TPU), optionally also made of polyurethane foam and covered in leather if desired. Armrest covers made of black, through-dyed polypropylene. Cantilever/ four-leg visitor chair Armrest pads made of black, through-dyed polypropylene. In non-stackable chairs, optionally with upholstered armrests, when covered in fabric with black leather 74/99, when covered in leather to match the colour of the leather. Standards The ON task and visitor/conference chairs comply with the DIN EN 1335, type A or B, and ANSI/BIFMA X 5.1 office chair standards. If required, NPR 1813 models are available. The ON cantilever and four-leg visitor chairs comply with the DIN EN L1, DIN EN 1022 and ANSI/BIFMA X5.1 standards. The ON task, four-leg visitor and cantilever chairs comply with the GS standard. Optionally, the ON task, visitor and conference chairs (without headrest) can also be shipped with dismantled backrests in boxes. All visitor and conference chairs have glides for soft flooring (e.g. carpets). Available on request with swivel-mounted column, not height adjustable (at no extra cost). Accessories Optionally for visitor chair model 176 / 7: inline connectors, model 177 made of zinc-plated steel, twowheeled cart model 176 for 8 visitor chairs. Optionally for cantilever chair, model 178/7, four-wheeled trolley, model 178 for 8 cantilever chairs. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions Task chairs 5 star base Swing plates Mechanism cover 50 Polyamide Silver satin finish, black or black coated textured matt Aluminium blasted finish 51 Bright chrome plated Silver satin finish, black, black coated textured matt Aluminium blasted finish or bright chrome-plated 52 Aluminium polished Aluminium polished Aluminium blasted 53 Coated black Black or black coated textured matt finish Aluminium blasted 60 Coated, silver satin finish Coated, silver satin finish Aluminium blasted Visitor chairs Round steel tube frame 51 Bright chrome plated Cantilever chair Round steel tube frame 51 Bright chrome plated Castors, glides, frame components, adjustment levers Small components 41 Black 11

15 ON Task chairs 24-hour chairs DIN EN 1355 compliant Upholstery material Medium-height backrest 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 174/7 With seat cushion, optionally with extra padding (please state on order), With 3 D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge/reduced prices Covered backrest Back with extra padding Permanent comfort tilt (6 ) Coated aluminium star base Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors Without armrests hour chair 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 174/8 With seat cushion, optionally with extra padding (please state on order), With 3 D armrests, Covered backrest, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Back with extra padding Permanent comfort tilt (6 ) Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Anti-static castors Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 12

16 ON Counter chair Upholstery material Counter chair 68/81 125/ ( 26¾"/31⅞" 49¼"/54⅜" 27⅛" 26") 174/1 With seat cushion, optionally with extra padding (please state on order), With 3 D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control with foot ring, bright chrome-plated (precision height-adjustable) Aluminium-coated star base and swing plates Additional charge/reduced prices Covered backrest Back with extra padding Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors Without armrests

17 ON Task chairs 24-hour chairs DIN EN 1355 compliant Upholstery material High backrest 40/52 105/ ( 15¾"/20½" 41⅜"/46⅛" 27½" 26") 175/7 With seat cushion, optionally with extra padding (please state on order), With 3 D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge/reduced prices Covered backrest Back with extra padding Headrest in the same material as the backrest cover Headrest covered in leather on the front, 74/99, black Permanent comfort tilt (6 ) Coated aluminium star base Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors Without armrests hour chair 40/52 105/ ( 15¾"/20½" 41⅜"/46⅛" 27⅛" 26") 175/8 With seat cushion, optionally with extra padding (please state on order), With 3 D armrests, Covered backrest, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Back with extra padding Headrest in the same material as the backrest cover Headrest covered in leather on the front, 74/99, black Permanent comfort tilt (6 ) Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Anti-static castors Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 14

18 ON Conference/visitor chairs Upholstery material Medium-height backrest 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 171/7 With seat cushion, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Covered backrest Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Without armrests Available with pivotable column, not height adjustable (at no extra cost). 15

19 ON Conference/visitor and cantilever chairs Upholstery material Standard height backrest ( 16⅞" 35⅜" 25¼" 25¼") 176/7 With seat cushion, optionally with extra padding (please state on order), Stackable 5 high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Covered backrest Back with extra padding Leather-upholstered armrests (not stackable) Standard height backrest ( 16⅞" 35⅜" 25¼" 25¼") 176/8 Four-leg with castors, Not stackable With seat cushion, optionally with extra padding (please state on order), Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Covered backrest Back with extra padding Leather-upholstered armrests (not stackable) Standard height backrest ( 16⅞" 36¼" 24" 23⅝") 178/7 With seat cushion, optionally with extra padding (please state on order), Stackable 5 high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Covered backrest Back with extra padding Leather-upholstered armrests (not stackable) All visitor and conference chairs have glides for soft flooring (e.g. carpets). Four-leg chair is fitted with castors for soft flooring (e.g. carpets). Please order with soft castors (at no additional charge) for hard flooring (e.g. stone, parquet). All cantilever chairs are fitted with anti-tilt stoppers for soft flooring (e.g. carpets). For hard floorings (e.g. stone) please order with soft glides, for hard floorings (e.g. parquet) please order with extra felt glides (in each case for no additional charge). 16

20 ON Task chairs with management grade upholstery 24-hour chairs DIN EN 1355 compliant Upholstery material Medium-height backrest 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 174/71 Seat with management grade upholstery, With 3 D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge/reduced prices Back with management grade upholstery Permanent comfort tilt (6 ) Coated aluminium star base Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors Without armrests hour chair 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 174/81 Seat with management grade upholstery, With 3 D armrests, Back with management grade upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Mehr-/Minderpreise Permanent comfort tilt (6 ) Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Anti-static castors Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 17

21 ON Task chairs with management grade upholstery 24-hour chairs DIN EN 1355 compliant Upholstery material High backrest 40/52 105/ ( 15¾"/20½" 41⅜"/46⅛" 27½" 26") 175/71 Seat with management grade upholstery, With 3 D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge/reduced prices Back with management grade upholstery Headrest in the same material as the backrest cover Headrest covered in leather on the front, 74/99, black Permanent comfort tilt (6 ) Coated aluminium star base Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors Without armrests hour chair 40/52 105/ ( 15¾"/20½" 41⅜"/46⅛" 27½" 26") 175/81 Seat with management grade upholstery, With 3 D armrests, Back with management grade upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Headrest in the same material as the backrest cover Headrest covered in leather on the front, 74/99, black 138 Permanent comfort tilt (6 ) Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Anti-static castors Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 18

22 ON Conference/visitor chairs with management grade upholstery Upholstery material Medium-height backrest 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 171/71 Seat with management grade upholstery, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Back with management grade upholstery Polished aluminium star base Aluminium bright chrome-plated star base Polished aluminium swivel arms Aluminium bright chrome-plated swivel arms Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Without armrests Available with pivotable column, not height adjustable (at no extra cost). 19

23 ON Conference/visitor and cantilever chairs with management grade upholstery Upholstery material Standard height backrest ( 16⅞" 35⅜" 25¼" 25¼") 176/71 Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Additional charge Back with management grade upholstery Leather-upholstered armrests Standard height backrest ( 16⅞" 35⅜" 25¼" 25¼") 176/81 Four-leg with castors, Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Additional charge Back with management grade upholstery Leather-upholstered armrests Standard height backrest ( 16⅞" 36¼" 24" 23⅝") 178/71 Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Additional charge Back with management grade upholstery Leather-upholstered armrests All visitor and conference chairs have glides for soft flooring (e.g. carpets). Four-leg chair is fitted with castors for soft flooring (e.g. carpets). Please order with soft castors (at no additional charge) for hard flooring (e.g. stone, parquet). All cantilever chairs are fitted with anti-tilt stoppers for soft flooring (e.g. carpets). For hard floorings (e.g. stone) please order with soft glides, for hard floorings (e.g. parquet) please order with extra felt glides (in each case for no additional charge). 20

24 ON Accessories Inline connector 177 (for model 176/7) 35 Two-wheeled cart 176 for 8 visitor chairs 627 Four-wheeled trolley 178 for 8 cantilevers

25 180 range Neos Design: wiege Technical details Function Task chairs with automatic synchroadjustment: The tilt of the seat and backrest automatically adapt to any postures users adopt. When leaning back, the backrest tension increases proportionately. The person using the chair can adjust the tension precisely by turning a crank. The backrest is lockable in four position at the touch of a button. In task chairs a DIN-4550-compliant gas lift for precision adjustment of the seat height. Adjustment of backrest height in seven positions within a range of 60 mm (2⅜"); models with mesh membrane backrests have lumbar support adjustable within a range of 60 mm (2⅜") instead of the height-adjustable backrest. All models with seatdepth extension in 11 positions ranging from mm. Models with a mesh membrane backrest as for task chair versions. Cantilever chairs: chair, stackable up to 5 high, for visitors, meetings, conferences and seminars to match task chairs; with flexible, unitary seat shell, integral stacking buffer and outer rail on the backrest. Models 183 / 3 with leather covering (74) and 183 / 5 not stackable. Frame Task chairs Five-star base in glass fibre-reinforced polyamide, through-dyed in black-grey, or in die-cast aluminium, polished, high-lustre polished or bright chrome plated. Twin wheel swivel castors with load-dependent braking DIN-EN compliant as the standard version for carpeting; with grey polyurethane tyre for hard flooring (please specify when ordering). Anti-static castors on request (when an aluminium frame is chosen). Synchro-mechanism cover in die-cast aluminium. Synchro-mechanism cover in black-grey through-dyed polypropylene. Seat bearer in glassfibre-reinforced polyamide, through-dyed in black-grey. See table below for frame types. Counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it and twin wheel swivel castors with load-dependent braking. Cantilever chairs Frame in round steel tube, 22 mm in diameter (⅞"), thickness 3 mm (⅛"), bright chrome plated, with anti-tilt stoppers in black-grey polyamide as the standard version for carpeted floors, optionally with glides in black-grey polyamide (for soft floors) or black-grey polyurethane (for hard floors), optionally with additional felt insert (please specify when ordering); outer rail in die-cast zinc, bright chrome plated. Optional outer rail made of very strong, glass-fibre-reinforced plastic, colour-matched with the shell. Seat Task chairs Seat shell in polypropylene, through-dyed in black-grey or white. Cushioning: covered, onepiece moulded polyurethane foam with integral pelvic support, exchangeable. Seat depth can be custom-adjusted from 385 mm to 435 mm. The seat is designed in such a way that the angle of the pelvic support automatically adjusts to the position of the seat shell. Back Task chairs Backrest shell made of polyamide with backrest shell cover made of polypropylene, black-grey or white through-dyed. Cushioning: covered polyurethane one-piece moulded foam, replaceable. Model 181/ 6 with backrest frame in glass-fibrereinforced polyamide, in black-grey, covered with transparent, blackgrey, light-grey or white high-performance polyester; lower section of backrest frame covering in polypropylene, in black-grey; optional lumbar support in polyamide, black-grey through-dyed with integral foam overlay. Cantilever chairs Seat and back Unitary seat and back shell in elastic polypropylene, through-dyed in black-grey or white. Seat cushion: exchangeable, with concealed screw fittings; comprising seat upholstery panel and covered polyurethane one-piece moulded foam. Type with optional, exchangeable back cushioning the same as the seat cushion. Model 183 / 3 with leather covering not stackable. Model 183 / 5 (not stackable) With leather-covered seat and back cushions with wool-fleece overlay and side facings, optionally with seat and back shell covered with leather on the back sections. Armrests Task chairs 3D armrests in glass-fibre-reinforced polyamide, through-dyed in black-grey or white, with black-grey polyurethane pad, adjustable by 100 mm (3⅞") in height and 50 mm (2") in depth; can be swivelled inwards and outwards by 15. Cantilever chairs PVC-free, sleeve-shaped armrest pad made of black-grey or white thermoplastic elastomer. Model 183 / 5 comes with armrest pad, padded and covered in leather with top stitching, or optionally with solid-wood armrest pads, oak, maple or walnut natural finish. Standards Neos task chairs comply with the DIN EN L1, ANSI / BIF- MA X 5.1 (except for model 181 / 6) and other international office chair standards. If required, NPR 1813 models are available. Depending on the version they also fulfil the requirements of categories A or B of of the DIN EN 1335 office chair standard. Neos task chairs comply with the Ergonomics Approved label. The cantilever and visitor chairs comply with DIN EN L1 and DIN EN standards. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions 5 star base 50 Polyamide 51 Bright chrome plated 52 Aluminium polished 72 Aluminium high-lustre polished 22

26 Neos Task chairs Upholstery material Medium-height backrest 40/52 98/ ( 15¾"/20½" 38⅝"/43¼" 26" 25¼") 181/71 With seat and back cushion, With 3 D armrests, Infinitely variable height adjustment, Adjustment of backrest height and seat depth, Automatic synchro-adjustment, tension control Frame polyamide Additional charge/reduced prices Seat and back shell and 3 D armrests through-dyed in white (black-grey armrest pad is standard) Frame aluminium polished Frame aluminium high-lustre polished Frame aluminium bright chrome plated Anti-static castors Without armrests Medium-height backrest 40/52 98/ ( 15¾"/20½" 38⅝"/43¼" 26" 25¼") 181/6 With seat cushion and transparent backrest, With 3 D armrests, Infinitely variable height adjustment, Adjustment of seat depth, Automatic synchro-adjustment, tension control Frame polyamide Additional charge/reduced prices Height-adjustable lumbar support Polyester material in light-grey or white Frame aluminium polished Frame aluminium high-lustre polished Frame aluminium bright chrome plated Anti-static castors Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 23

27 Neos Counter chairs Upholstery material Counter chair 67/80 125/ ( 26⅜"/31½" 49¼"/54⅜" 26" 25¼") 181/11 With seat and back cushion, With 3 D armrests, Infinitely variable height adjustment, Adjustment of backrest height and seat depth, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable) Frame aluminium polished Additional charge/reduced prices Seat and back shell and 3 D armrests through-dyed in white (black-grey armrest pad is standard) Frame aluminium bright chrome plated Without armrests Counter chair 67/80 125/ ( 26⅜"/31½" 49¼"/54⅜" 26" 25¼") 181/1 With seat cushion and transparent backrest, With 3 D armrests, Infinitely variable height adjustment, Adjustment of seat depth, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable) Frame aluminium polished Additional charge/reduced prices Height-adjustable lumbar support Polyester material in light-grey or white Frame aluminium bright chrome plated Without armrests

28 Neos Cantilever chairs Upholstery material Standard height backrest ( 16⅞" 31½" 21⅝" 23⅝") 183/3 With seat cushion, backrest not upholstered, Bright chrome-plated outer rail, Stackable 5 high free-standing, up to 8 high on two-wheeled cart, with leather covering, not stackable, With plastic-covered armrests Frame bright chrome plated Additional charge/reduced prices Seat/back shell and armrest pad through-dyed white Back cushion Plastic outer rail, colour-matched with the shell Standard height backrest ( 16⅞" 31½" 22⅞" 23⅝") 183/5 With seat and back cushion, Not stackable, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seam Frame bright chrome plated 1234 Additional charge/reduced prices Seat and back shell covered with leather on the back sections 213 Solid-wood armrests 164 All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 25

29 Neos Accessories Four-wheeled trolley 183 for eight stackable cantilever chairs

30

31 184 range IN Design: wiege Technical details Function An office task chair with Trimension, integrated synchronously supporting 3D kinematics which allows the right-hand and left-hand half of the chair to be tilted in any direction via two flexible swing swivel arms. The goal is to encourage the natural range of motion the pelvis is capable of which includes flexing, extending and moving it sideways to rotating it. The combination of the 3D synchronous adjustment mechanism with a highly elastic seat and back guarantees the chair adapts automatically to any movement made or posture adopted by the person sitting on it. As a result, the body is supported in any position and maintains its centre of gravity. The counter pressure, which provides support in any direction moved in, is precision adjustable for people weighing from 45 to 140 kg by changing the elasticity. The backrest has optional, height-adjustable lumbar support (in six lockable positions of up to 60 mm). The backrest and seat can locked in the neutral sitting position, the 3D frontwards tilt of 5 can be activated by pressing a button in order to harness the maximum range of motion. The seating height can be precisely adjusted at the touch of a button between 400 mm and 520 mm with a DIN 4550-compliant gas lift. Seat depth: 430 mm, optionally with seat depth that can be adjusted while sitting down in 4 lockable positions of 400 to 450 mm. Frame Task chairs Five-star base made of black through-dyed, glass-fibre-reinforced polyamide, optionally diecast aluminium, coated, polished or high-lustre polished. Twin wheel swivel castors with load-dependent braking, made of black polypropylene compliant with DIN EN as the standard version for carpets; optionally with grey tyre for hard floors. Castors optionally electrically conductive. Gas lift covered by telescopic protective tube made of black through-dyed polypropylene. Mechanism cover made of die-cast aluminium, coated matt black with black through-dyed polypropylene bellows and thermoplastic elastomer to accommodate the flexibly mounted central spring, knob to adjust the counter pressure made of polyamide (for people weighing from 45 to 140 kg). Each chair has two swivel arms which can move independently of one another, made of die-cast aluminium, coated, matt polished or high-lustre polished, with protective caps made of polypropylene. Counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it and twin wheel swivel castors with load-dependent braking. 24-hour chairs Always with die-cast aluminium star base, with extra swivel arm supports and high-performance covers. Designed for people weighing up to 150 kg, the models also comply with the British Standard. Seat and back Unitary, highly elastic and flexibly suspended seat and back made of high-performance polyamide. Seat shell made of black or white through-dyed polyamide with polypropylene seat upholstery panel. Polyurethane seat cushions with CFC-free foam, covered in Racer, optionally also with Formstrick (form-fit knit) that offers different support zones, in the same material as the backrest cover, or with fabric covers from the Wilkhahn fabric collection, then with facings sewnin and deep top stitching lengthways to create contours. The seat upholstery panel, cushioning and covers are replaceable. With optional precision adjustable seat-depth extension of 400 to 450 mm. Seat cushions covered with form-fit knit which has different support zones, in the same material as the cover on the backrest, or with fabric covers and then with facing made of black Racer sewn in, only in the same material and colour when the seat cover is also in Racer and with deep, lengthways top stitching to create contours. The seat upholstery panel, cushioning and covers are replaceable. The back section is the frame, optionally with Hytrel lumbar support, in black or white to match the seat shell; height-adjustable by 60 mm in six lockable positions and can be retrofitted at any time. The back is covered in Formstrick (formfit knit) which includes different elasticity for flexible and supporting zones, optional two-ply cover made of Formstrick with integrated foam with different support zones. Colours based on the Wilkhahn sample card. Armrests Armrests height adjustable by 100 mm in ten lockable positions and made of glass-fibre-reinforced, black through-dyed polyamide, optionally with three dimensional adjustment. Armrest pads made of black through-dyed polypropylene, optionally of polyurethane foam. Also optionally without armrests. Standards The IN task chairs comply with the DIN EN 1335, ANSI/BIFMA X 5.1. and GS standards. Please note If very damp, the elasticity of the Formstrick can slightly slacken, but will regain its original shape when it dries. Frame versions Star base Swing plates 50 Polyamide Black matt or coated in silver-satin finish 52 Aluminium polished Black matt or coated in silver-satin finish or polished 72 Aluminium high-lustre polished Black matt or coated in silver-satin finish or high-lustre polished 60 Coated, silver satin finish Coated, silver satin finish 80 Black matt coating Black matt coating 81 Matt turquoise coated Matt turquoise coated 82 Matt grey coated Matt grey coated 83 Matt orange coated Matt orange coated 84 Matt red coated Matt red coated Mechanism shell matt black coated, flexible mechanism cover and knob to adjust the tension control made of black, through-dyed plastic. 28

32 IN Task chairs, 24-hour task chair BS-5459 compliant Upholstery material Medium-height backrest 40/52 101/ ( 15¾"/20½" 39¾"/44½" 27⅛" 26") 184/7 With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment, Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge/reduced prices Aluminium-coated star base and swing plates Aluminium polished star base, coated swivel arms Aluminium high-lustre polished star base, coated swivel arms Aluminium polished star base and swing plates Aluminium high-lustre polished star base and swivel arms Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Height-adjustable lumbar support D armrests, armrest pads made of PP Armrest pads made of polyurethane foam for 2D and 3D Anti-static castors Without armrests hour chair 40/52 101/ ( 15¾"/20½" 39¾"/44½" 27⅛" 26") 184/8 With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment, Trimension, tension control Aluminium-coated star base and swing plates Additional charge/reduced prices Aluminium polished star base, coated swivel arms (without additional charge) Aluminium high-lustre polished star base, coated swivel arms (without additional charge) Aluminium polished star base and swing plates Aluminium high-lustre polished star base and swivel arms Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Height-adjustable lumbar support D armrests, armrest pads made of PP Armrest pads made of polyurethane foam for 2D and 3D Anti-static castors Without armrests available All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame). 29

33 IN Counter chairs Upholstery material Counter chair 65/78 126/ ( 25⅝"/30¾" 49⅝"/54¾" 27⅛" 26") 184/1 With seat cushion, back covered with form-fit knit (Formstrick), single ply Seat and backrest frame optionally in black or white with 2D armrests, armrest pads made of PP Infinitely variable height adjustment Trimension, tension control without switchable 3D forwards tilt at 5 with foot ring, bright chrome-plated (precision height-adjustable) Aluminium-coated star base and swing plates Additional charge/reduced prices Aluminium polished star base, coated swivel arms (without additional charge) Aluminium polished star base and swing plates Back covered in form-fit knit (Formstrick), two-ply, with integrated upholstery foam with different support zones Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Height-adjustable lumbar support D armrests, armrest pads made of PP Armrest pads made of polyurethane foam for 2D and 3D Without armrests available 30

34

35 186 range Metrik Design: white ID Technical details Function The Metrik cantilever chair stands out for its consistently integrated design approach. All the components play with contrasts such as distinctiveness and neutrality, comfort and an understated appeal, as well as modernity and timeless design. As a result, Metrik can be combined with a variety of table concepts and office chairs. A choice of six colours for the body and frame and plenty of different options and colours for the covers ensure huge design scalability. To suit preferences, Metrik either complements the overall design concept or purposely adds a splash of colour. Chairs Frame Frame made of tubular steel, optionally with textured matt finish coated in white, black, grey, greybeige, orange-red, blue-grey or bright chrome-plated, with anti-tilt stopper made of black polyamide as the standard version for carpets, optionally with multipurpose glides for hard floorings (e.g. stone), for wood floorings (e.g. parquet) please order with extra felt glides. Stacking buffer made of plastic like the shells and frame colour. Please note: coated frame versions aren t stackable. Seat and back Unitary seat and backrest shell with integrated armrests made of through-dyed, glass fibre-reinforced polyamide the same as the shell, optionally with a textured matt finish coated in white, black, grey, grey-beige, orange-red or blue-grey. Seat cushion exchangeable, consists of seat upholstery panel and covered polyurethane one-piece moulded foam. Type with optional, exchangeable back cushioning the same as the seat cushion. Weight 8.6 kg Accessories Inline connectors (2 in each set) made of black plastic Please note: When exposed to ultra violet rays for long periods of time, the colours of plastics can change slightly. Frame versions Cantilever chair 51 Bright chrome plated 85 Grey coated textured matt finish (Pantone Cool Gray 10 C) 86 Grey-beige coated textured matt finish (Pantone 7530 C) 87 Orange-red coated textured matt finish (Pantone 2349 C) 88 Blue-grey coated textured matt finish (Pantone 2178 C) 90 Black coated textured matt finish (RAL 9011) 91 White coated with textured matt finish (RAL 9016) 32

36 Metrik Cantilever chair Upholstery material Standard height backrest ( 17¾" 34¼" 22½" 23⅝") 186/3 with seat cushion Coated frame, not stackable Bright chrome-plated frame, up to 6 stackable freestanding With seat and back cushion Accessories 186 Four-wheeled trolley for 8 cantilevers Inline connector 2 for bright chrome-plated frame 8 All cantilever chairs are optionally available with anti-tilt stoppers for soft floorings (e.g. carpets), with multipurpose glides for hard floorings (e.g. stone), for wood floorings (e.g. parquet) please order with extra felt glides. 33

37 20 range Stitz 2 Design: ProduktEntwicklung Roericht Technical details Function The Stitz is a leaning aid with infi nitely variable height adjustment by means of an encapsulated gas lift. Frame Black elastomer base filled with quartz sand. Black polyamide base plate. Seat Black polyamide seat frame. Cork inset, optionally hard wax treated, covered in fabric or in embossed leather. Gas lift lever for height adjustment, accessible all round, underneath black polyamide seat base. Upholstery material Stitz 60/83 31 ( 23⅝"/32⅝" 12¼") 201/1 Seat surface cork Frame black /2 Frame black

38

39 202 range Stand-up Design: Thorsten Franck Technical details Function An object in motion, when sat on it s turned from a one-legged to stable three-legged piece of furniture. Body Conical hollow body made of EPP (expanded polypropylene) with a lid upholstered with cut foam that serves as the seat. Body and seat fully covered with three-dimensional fabric. With a tapered base made of black, anti-slip plastic with integrated steel weights and a damping cylinder. Carry-strap made of strong, black plastic. Weight Just 4.5 kg Please note In wet or dirty conditions, the base s grip can vary. It can cause scuff marks on light-coloured flooring. Upholstery material 35 Stand-up ( 26⅜" 12⅝") 202/0101 Covered in Fiberflex fabric: Black /0102 Covered in Fiberflex fabric: Red /0103 Covered in Fiberflex fabric: Light blue /0104 Covered in Fiberflex fabric: Green /0105 Covered in Fiberflex fabric: Orange /0106 Covered in Fiberflex fabric: Dark blue /0107 Covered in Fiberflex fabric: Anthracite /0108 Covered in Fiberflex fabric: Grey /0109 Covered in Fiberflex fabric: Brown 269 incl. carry-strap Black base 36

40

41 21 range FS-Line Design: Klaus Franck, Werner Sauer Technical details Function Task chairs with automatic synchroadjustment: the seat / backrest angle adjusts automatically to the position of the person sitting on them. When leaning back, the backrest tension increases proportionately. The person using the chair can adjust the tension precisely. The front position is lockable by engaging the lever. DIN 4550 compliant gas lift for precision adjustment of the seating height. Conference chairs / visitor chairs with automatic synchro-adjustment, but without front locking position, without any option to precision adjust the height. Frame Task chairs Die-cast aluminium star base, bright chrome plated, polished or coated. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN as the standard version for carpets; with grey soft poly urethane tyre for hard floors. Castors optionally electrically conductive. Black polyamide glides as the standard version for carpets and in black polyurethane for hard floorings. Swivel arms in die-cast aluminium, bright chrome plated or coated in the same colour depending on star base (coated black with polished star-base). 211/1 counter stool With FS-star base on glides. 211/11 counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome-plated, with lock screw to affix it with and twin wheel swivel castors with load-dependent braking. Seat and back Models 211/1 to 213/8 Seat and backrest shell in viscoelastic, through-dyed polypropylene with a flexible middle section in the colours 91 natural white, 92 platinum 97 asphalt, 99 black. Standard armrests in the same material, black. Backrest of task chairs 211 and 213 optionally with integral, adjustable lumbar support. Seat upholstery: one-piece moulded foam covered, replaceable. Seat and back Models 220/6 to 220/9 Tubular steel frame with flexible middle section, over which an elastic mesh is stretched and the whole is moulded in foam. Integral foam armrests, leather-covered, with fabric covers in black, covered in leather according to the colour of the leather. Cover with stitched fluting exchangeable, or cover with integrated flat cushion, exchangeable. Standards FS task chairs are compliant with the DIN EN 1335, DIN EN L1, the ANSI / BIFMA X 5.1 and other international office chair standards. Depending on the version they also fulfil the requirements of categories B or C of the DIN EN 1335 office chair standard. FS cantilever chairs comply with DIN The FS task chairs comply with the Ergonomics Approved standard. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Cantilever chairs: Frame for models 212/5 in tubular steel, bright chrome plated or coated; stackable version with bright chrome plated frame only. Frame of model 220 in oval aluminium tubing, bright chrome plated or coated. Cantilever chair model 212 with anti-tilt stoppers as the standard version for carpeted floors, with additional glides for hard floors, on request with felt insert. Frame versions Task chairs Star base and swing arms 51 Bright chrome plated 52 Star base aluminium polished swing arms coated (black) 53 Coated black 60 Coated, silver satin finish Cantilever chair 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish Round steel tube frame or oval aluminium tube frame Small components Castors or glides, frame components, armrests, adjustment levers 41 Black 38

42 FS-Line Task chairs Counter chairs Upholstery material Standard height backrest 42/53 88/ ( 16½"/20⅞" 34⅝"/39" 24¾" 23⅝") 211/8 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Height-adjustable lumbar support Frame aluminium polished Frame aluminium bright chrome plated Anti-static castors Without armrests High backrest 42/53 105/ ( 16½"/20⅞" 41⅜"/45⅝" 25⅝" 24⅜") 213/8 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Height-adjustable lumbar support Frame aluminium polished Frame aluminium bright chrome plated Anti-static castors Without armrests Counter chair 67/80 113/ ( 26⅜"/31½" 44½"/49⅝" 27⅛" 26") 211/11 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable) Frame aluminium coated Frame aluminium polished Frame aluminium bright chrome plated Counter chair 52/63 109/ ( 20½"/24¾" 42⅞"/47¼" 25⅝" 24¾") 211/1 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring (not height adjustable) Frame aluminium coated Frame aluminium polished Frame aluminium bright chrome plated All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. 39

43 FS-Line Task chairs Upholstery material Medium-height backrest 42/52 92/ ( 16½"/20½" 36¼"/40⅛" 26⅜" 24¾") 220/8 One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated (2967)* Slim cushion * Leather 87 available with slim cushion only Frame aluminium polished Frame aluminium bright chrome plated Anti-static castors High backrest 42/52 108/ ( 16½"/20½" 42½"/46½" 26⅜" 24¾") 220/9 One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated (3458)* Slim cushion * Leather 87 available with slim cushion only Frame aluminium polished Frame aluminium bright chrome plated Anti-static castors All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 40

44 FS-Line Conference chairs/visitor chairs Upholstery material Standard height backrest ( 17⅜" 35" 24¾" 23⅝") 211/6 Swivel-mounted, One-piece seat and back shell, upholstered, Automatic synchro-adjustment, tension control Frame aluminium coated Frame aluminium polished Frame aluminium bright chrome plated Medium-height backrest ( 16½" 36¼" 26⅜" 24¾") 220/6 Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension control Frame aluminium coated (2877)* Slim cushion * Leather 87 available with slim cushion only Frame aluminium polished Frame aluminium bright chrome plated High backrest ( 16½" 42½" 26⅜" 24¾") 220/7 Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension control Frame aluminium coated (3368)* Slim cushion * Leather 87 available with slim cushion only Frame aluminium polished Frame aluminium bright chrome plated All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 41

45 FS-Line Cantilever chairs Upholstery material Standard height backrest ( 17⅜" 33½" 22" 24") 212/5 One-piece seat and back shell, upholstered, Frame coated Frame bright chrome plated Stackable version (in combination with frame bright chrome plated only, stackable 5 high free-standing, up to 8 high on four-wheeled trolley) All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 42

46 FS-Line Accessories Four-wheeled trolley 214 for eight stackable cantilever chairs

47 21 range FS Management Design: Klaus Franck, Werner Sauer, wiege Technical details Function Task chairs with automatic synchroadjustment: the seat and backrest automatically tilt to any posture the person adopts. When leaning back, the backrest tension increases proportionately. The person using the chair can infinitely adjust the tension. The front position is lockable by engaging the lever. DIN 4550 compliant gas lift for infinite adjustment of the seat height. Frame Die-cast aluminium, bright chrome plated star base. Twin wheel swivel castors with load-dependent braking, made of black polyamide in accordance with DIN EN as the standard version for carpets; with grey soft polyurethane facing for hard floors. Castors optionally electrically conductive. Black polyamide glides as the standard version for carpets and in black polyure thane for hard floorings. Die-cast aluminium, bright chrome plated swivel arms. Seat and back Steel tube frames with a flexible middle section, covered with elastic mesh. Foam upholstery with additional cushioning. Exchangeable cover with wider stitched fluting. Integral foam armrests, leathercovered with stitched seam. Standards The FS task chairs comply with DIN EN 1335, ANSI / BIFMA X 5.1 and other international office chair standards. Depending on the version they also fulfil the requirements of categories B or C of the DIN EN 1335 office chair standard. Standards The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions Task chairs Star base and swing arms 51 Bright chrome plated Small components Castors or glides, frame components, armrests, adjustment levers 41 Black 44

48 FS Management Task chairs Upholstery material 74 Medium-height backrest 42/52 100/ ( 16½"/20½" 39⅜"/43¼" 26⅜" 24¾") 220/82 One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium bright chrome plated 2688 Additional charge Anti-static castors 45 High backrest 42/52 116/ ( 16½"/20½" 45⅝"/49⅝" 26⅜" 24¾") 220/92 One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium bright chrome plated 3114 Additional charge Anti-static castors 45 All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. 45

49 222 range Occo Design: Jehs+Laub Technical details Function In conference rooms, open-plan meeting areas or company restaurants: Occo offers superior comfort, enormous versatility and a vast range of design options in a distinctive design language. Chairs Frame Four-leg models 222/10, 222/11, 222/12 Tubular steel frame with textured matt finish coated in white, black, grey, greybeige, orange-red, blue-grey or bright chrome-plated. Please note: Coated frame versions aren t stackable. Model 222/10 (shell with no upholstery) with four separators made of PUR and frame cover made of plastic (PP) each in dark grey. Models 222/11 and 222/12 with stacking guard made of plastic (PP) in dark grey. Four-leg frame in solid wood models 222/20, 222/21, 222/22 Seat bearer made of tubular steel in dark grey with a textured matt finish to fit onto the seat shell and to attach the four legs made of solid oak with a natural oiled finish. Four-star base models 222/30, 222/31, 222/32 Five-star base models 222/40, 222/41, 222/42 Butted tubular steel with a textured matt finish coated in white, black, grey, grey-beige, orange-red, bluegrey or bright chrome-plated with seat bearer made of moulded flat steel in dark grey with a textured matt finish to attach to the shell. In the case of four-star bases the steel glides are in dark grey with a textured matt finish. Four-leg and four-star base models are fitted with multipurpose glides for soft and hard floorings. For sensitive floorings order with extra felt glides (at no additional charge). Five-star base models 222/40, 222/41, 222/42 with twin wheel swivel castors with load-dependent braking, made of black polypropylene compliant with DIN EN as the standard version for carpets, optionally with grey polyurethane tyre for hard floors. Seat and back Unitary, ergonomically moulded seat shell with cut-out section, made of reinforced through-dyed polypropylene optionally in white, black, grey, grey-beige, orange-red or blue-grey. Models 222/10, 222/20, 222/30, 222/40 optionally with felt seat cushion with anti-slip coating. In anthracite, light mottled, graphite, mango, verde, deep water. Models 222/11, 222/21, 222/31, 222/41, with seat cushion and models 222/12, 222/22, 222/32, 222/42 with padding on the inside made of cut foam in each case. Please note: To ensure quality is maintained we don t offer white leather (74/72). All other standard leather colours are possible. When exposed to ultra violet rays for long periods of time, the colours of plastics can change slightly. Frame versions Four-leg chairs and star-base frames 51 Bright chrome plated 85 Grey coated textured matt finish (Pantone Cool Gray 10 C) 86 Grey-beige coated textured matt finish (Pantone 7530 C) 87 Orange-red coated textured matt finish (Pantone 2349 C) 88 Blue-grey coated textured matt finish (Pantone 2178 C) 90 Black coated textured matt finish (RAL 9011) 91 White coated with textured matt finish (RAL 9016) 46

50 Occo Multi-purpose chair Upholstery material Multi-purpose chair ( 17⅜" 32¼" 22½" 22⅞") 222/10 Four-leg frame, not upholstered Frame coated, colour matched with the shell, Not stackable 198 Bright chrome-plated frame, up to 10 stackable freestanding 198 Accessories 186 Four-wheeled trolley for 10 multipurpose chairs Felt cushion with non-slip coating, available in 6 colours 41 Multi-purpose chair ( 17⅜" 32¼" 22½" 22⅞") 222/11 Four-leg frame with seat cushion Frame coated, colour matched with the shell, Not stackable Bright chrome-plated frame, up to 6 stackable freestanding Accessories 186 Four-wheeled trolley for 6 multipurpose chairs 293 Multi-purpose chair ( 17⅜" 32¼" 22½" 22⅞") 222/12 Four-leg frame with padding on inside Frame coated, colour matched with the shell, Not stackable Bright chrome-plated frame, up to 4 stackable freestanding Accessories 186 Four-wheeled trolley for 4 multipurpose chairs 293 All chairs are fitted with multipurpose glides for soft and hard floorings, in the case of sensitive floorings please order with extra felt glides (at no additional charge). 47

51 Occo Multi-purpose chair Upholstery material Multi-purpose chair ( 17⅜" 32¼" 22½" 21⅝") 222/20 Solid wood four-leg frame, oak, natural oiled finish not upholstered Not stackable 345 Accessories 222 Felt cushion with non-slip coating, available in 6 colours 41 Multi-purpose chair ( 17⅜" 32¼" 22½" 21⅝") 222/21 Solid wood four-leg frame, oak, natural oiled finish with seat cushion Not stackable Multi-purpose chair ( 17⅜" 32¼" 22½" 21⅝") 222/22 Solid wood four-leg frame, oak, natural oiled finish with padding on inside Not stackable All chairs are fitted with multipurpose glides for soft and hard floorings, in the case of sensitive floorings please order with extra felt glides (at no additional charge). 48

52 Occo Multi-purpose chair Upholstery material Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/30 Four-star base frame, not upholstered, swivel-mounted Frame coated, colour matched with the shell 408 Frame bright chrome plated 408 Accessories 222 Felt cushion with non-slip coating, available in 6 colours 41 Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/31 Four-star base frame with seat cushion, swivel-mounted Frame coated, colour matched with the shell Frame bright chrome plated Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/32 Four-star base frame with padding on inside, swivel-mounted Frame coated, colour matched with the shell Frame bright chrome plated All chairs are fitted with multipurpose glides for soft and hard floorings, in the case of sensitive floorings please order with extra felt glides (at no additional charge). 49

53 Occo Multi-purpose chair Upholstery material Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/40 Five-star base frame, not upholstered on castors, swivel-mounted Frame coated, colour matched with the shell 419 Frame bright chrome plated 419 Accessories 222 Felt cushion with non-slip coating, available in 6 colours 41 Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/41 Five-star base frame on castors, with seat cushion, swivel-mounted Frame coated, colour matched with the shell Frame bright chrome plated Multi-purpose chair ( 16⅞" 32⅝" 22⅞" 22") 222/42 Five-star base frame on castors, with padding on inside, swivel-mounted Frame coated, colour matched with the shell Frame bright chrome plated Five-star base frames are fitted with castors for soft floorings. Please order with soft castors (at no extra charge) for hard flooring (e.g. stone, parquet).. 50

54

55 222 range Occo Design: Jehs+Laub Technical details Tables Frame Models 222/60 and 222/70 with four-star bases, table legs made of butted tubular steel, optionally with a textured matt finish coated black or white or bright chromeplated. Models 222/80 and 222/90, table legs connected with a crossbeam. Models as of 90 x 180 incl. extra reinforcement uprights in dark grey textured matt finish. All table top bearers and glides made of steel in dark grey with a textured matt finish. All tables are fitted with multipurpose glides for soft and hard floorings. For wood floorings (e.g. parquet) order with extra felt glides (at no additional charge). Adjustment range: 10 mm. Optional lockable, height adjustable, swivel castors with a black polyamide tyre as the standard version for carpeted floors; castors available with a polyurethane tyre for hard floors (please specify when ordering). Core material of table top Table top group 2 veneer variation 1 and 2 Table top group 2 veneer variation 1 and 2 MDF (medium density fibreboard), table top thickness 26 mm, Variation 1: Beech, oak or ash veneer from Wilkhahn wood-stain colour samples with chamfered wood lipping (exception: not in natural ash), colour matched as far as possible with the veneer. Variation 2: Maple (exception: no natural maple), walnut or elm veneers, as well as Wilkhahn Mocca veneer from the Wilkhahn woodstain colour samples with chamfered wood lipping, colour matched as far as possible with the veneer. Table height 74.4 Table top group 5 with direct coating Table top thickness 25 mm thick, melamine resin, with direct coating in white or black with straight plastic lipping colour matched with the surface. Table height 74.3 Table top group 7 black/white through-dyed Table top thickness 12 mm. Table top made of through-dyed HPL (High Pressure Laminate) in black or white, chamfered lipping. Table height 73 Table top group 10 solid wood Table top thickness 25 mm Solid oak based on the Wilkhahn woodstain colour samples, natural oiled finish, lipping, rounded on the bottom. Table height 74.3 E4 1 solid wood edge, rounded on the bottom E2 3 Straight plastic edging E2 5 Chamfered wood edging, 12 mm (1/2 ) E5 1 HPL solid core, Edge chamfered, 4 mm radius Frame versions Tables 51 Bright chrome plated 90 Black coated textured matt finish (RAL 9011) 91 White coated with textured matt finish (RAL 9016) 52

56 Occo Tables Table top group Bonded surface Black through-dyed White through-dyed Veneer variation 1 Veneer variation 2 Solid wood Square 222/60 90 x 90 (35⅜" x 35⅜") For 4 people Frame coated Frame bright chrome plated Additional charge Castors 20 Round 222/70 Ø 100, (Ø 39⅜") For 4 people Frame coated Frame bright chrome plated Additional charge Castors 20 Rectangular 222/80 80 x 160 (31½" x 63") For 4 6 people Frame coated Frame bright chrome plated x 180, (35⅜" x 70⅞") For 6 people Frame coated Frame bright chrome plated x 190 (35⅜" x 73¾") For 6 people Frame coated Frame bright chrome plated Additional charge Castors 20 Oval 222/90 90 x 180, (35⅜" x 70⅞") For 6 people Frame coated Frame bright chrome plated x 200 (35⅜" x 78¾") For 6 people Frame coated Frame bright chrome plated Additional charge Castors 20 53

57 230 range Aline Design: Andreas Störiko Technical details Function Stylish and coherently designed, multipurpose furnishing range for meetings, consultations and seminars, in showrooms and event spaces, areas for breaks, lounges and bistros, as well as libraries, internet cafés or home offices. Multipurpose chair Light, transparent and stackable multipurpose chair for meetings, consultations, seminars and largescale events. Very compact, form-fit stacking, with each chair adding only 20 mm (¾") to the height of the stack due to self-engaging, covered seat and back frames (total height of 15 stacked chairs is 106 cm (41¾ ) and in model 233 only 109 cm). Weight only 5.1 kg (without armrests) or 5.4 kg (with armrests). Model 233 only weighs 5.9 kg (without armrests) or 6.2 kg (with armrests). Multipurpose chair, optionally with seat cushion, available as a stackable or a non-stackable version. The stackable types have extra stacking bumpers and can be stacked extremely compactly in a form-fit manner. Counter/bar stool Stylish and transparent bar stool with backrest and footrest bar, optionally with seat cushion. Task chairs and visitor chairs Simple, transparent visitor task chairs and height-adjustable office task chairs for meetings and consultations, Internet cafés, showrooms and hot desking spaces. Tables Square and round top column tables in low, sitting and standing heights (optionally stackable) and rectangular tables on a T-shaped base for lounges and recreational areas, cafeterias and bistros. Chairs Frame Multipurpose chair Multipurpose chair: Skid base made of tubular steel 12 mm in diameter, bright chrome-plated, supports the seat frame at the front and continues at the rear through the seat frame to the back frame. On request, with additional glides in black plastic for all types of flooring optionally with extra felt insert. When ordering inline connector 238, multipurpose glides are automatically applied, optionally with extra felt insert for flooring that easily scratches (e.g. stone, parquet). 231 Inline connectors cannot be used for models 233/1 and 233/2. Counter/bar stool Like the multipurpose chair, but can t be stacked, extra strength provided by bright chrome-plated flat steel stretchers (16 x 6 mm - 5/8" x ¼") and a footrest set further back made of tubular steel. Task chair and visitor chairs Four-star base (visitor chair) or fivestar base (task chair) in die-cast aluminium, bright chrome plated. Task chair with black polyamide glides (for soft flooring), or black polyurethane (for hard flooring), optionally with additional felt insert. Task chair with twin wheel swivel castors in black polypropylene with load dependent braking (for soft floors) or with a soft tyre (for hard floors); anti-static castors on request. Fixed height swivel pedestal with contact suppression feature (visitor chair) or additional infinitely height adjustable swivel-mounted column (task chair), bright chromeplated tube. Seat and back In models 230/1, 230/2, 230/5, 230/6 seat and back frames in very strong, glass-fibre-reinforced polyamide, optionally through-dyed in black, grey or white, with high performance coated polyester fabric optionally in the same colour as the seat and back frames. When the seat- and backrest frame are black through-dyed, two-colour cover in copper-black or silver-black possible as well. Optionally with or without armrests in the same material or colour. Optionally with a polypropylene seat shell and cut-foam seat cushion. Stackable types (only models 233/1 and 230/2) with glass-fibre-reinforced polyamide stacking bumper that colourmatches the seat and backrest frame. Models 233/1, 233/2, 233/4, 233/6 Seat and back frame are made of high-performance glass-fibre-reinforced polyamide, optionally black or white through-dyed, optionally with or without armrests in the some material and colour. The plastic membrane is made of throughdyed polyamide like the seat and back frame. Optionally with cut foam seat cushioning. Stackable types (only models 233/1 and 233/2) with glass-fibre-reinforced polyamide stacking bumper that colour-matches the seat and backrest frame. Task and visitor chairs (models 232 / 1, 232 / 2, 231 / 1, 231 / 2) optionally with cut-foam seat cushion, with cover in stitched fluting, cushioning 10 mm thick. Tables Frame Models 235/236 Four-star base in die-cast aluminium, bright chrome plated, with glides in black polyamide (for soft floors) or black polyurethane (for hard floors), optionally with additional felt insert. Table column in 4 mm (⅛") thick steel tubing, diameter 40 mm (15/8"), for low, sitting and standing height (45 / 73 / 105 cm) (17¾"/ 28¾/ 41⅜"), coated in black or white to match the table top, with round steel flange coated black; stackable version additionally with slip-free separator, collar and docking guide in black plastic. Model 237/00 Unitary, die-cast aluminium foot section, optionally bright chromeplated, or coated in black or white. Black polyamide glides (for soft flooring), or black polyurethane (for hard flooring), optionally with additional felt insert. Aluminium upright to match the table top, black or white coated, or optionally bright chrome plated. Underframes made of rectangular steel tubing with flange, coated black or white depending on the foot section. If the foot section is bright chrome-plated, black coating. 54

58 Core material of table top models 235 / 236 / 237 Table top made of through-dyed HPL (High Pressure Laminate) in black or white. Each table top 12 mm thick. Models 235 / 236 in sizes: 60 x 60 cm (235/8" x 235/8") (for table heights 45 (17¾") and 105 cm (41⅜")) and 70 x 70 cm (27½" x 27½") (for table heights 73 cm (28¾")) and round, diameter 75 cm (29½") (for table heights 45 (17¾") and 73 cm (28¾") and diameter 70 cm (27½") (for table height 105 cm (41⅜")). 237 models in the following sizes: (Table height 73 cm) 70 x 140 cm 75 x 150 cm 80 x 160 cm 90 x 180 cm 90 x 200 cm In the version with veneer (on request): MDF (medium density fibreboard) panel only in combination with veneered surface finish with colourmatched, chamfered wood lipping (with a radiused edge). Exception: maple or ash with natural finishes are not available. Table top group 2 veneer Table top thickness 20 mm Variant 1: beech or oak veneer based on Wilkhahn woodstain colour samples with wood lipping, to colour match the veneer as far as possible. Variant 2: walnut or elm veneer as well as Wilkhahn Mocca veneer based on the Wilkhahn woodstain colour samples with wood lipping to colour match the veneer as far as possible. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: oak, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: beech veneer. Some specific growth features possible. Tables Round column tables in four different formats (Ø cm) for large conferences, meetings or as home dining tables. Frame models 237/2, 4, 5 Steel disc base (Ø 610 mm) with sheet steel cover, coated in white or black, or with optional ultra-polished stainless steel cover. Tubular steel table column (Ø 80 mm), white or black coated, optionally bright chrome-plated. Rectangular tube table top bearer, coated in black. Frame model 237/6 Steel disc base (Ø 735 mm) with sheet steel cover, coated in white or black, or with optional ultra-polished stainless steel cover. Tubular steel table column (Ø 80 mm), white or black coated, optionally bright chrome-plated. Rectangular tube table top bearer, coated in black. Core material of table top models 237/2, 4, 5, 6 MDF table top (medium density fibreboard), white, or black powder coated with chamfered edge. Each table top 25 mm thick. Accessories Optional for multipurpose chair: automatically retractable inline connectors type 231 (only models 230/1, 230/2) made of matt chrome-plated steel. Inline connectors, type 238, only with special multi-purpose glides made of black POM for hard and soft floorings, or with extra felt for flooring that easily scratches. Chairs with armrests can only be linked alternately with chairs with no armrests. Stackable four-wheeled trolley made of blackcoated tubular steel with four ballbearing mounted wheels for hard and soft floorings, two of which are lockable directional wheels. Standards The stackable Aline chairs comply with the DIN EN L1 and ANSI/BIFMA X 5.1 office chair standard. Frame versions Multi-purpose and counter chairs Frame 51 Bright chrome plated Task chair and visitor chair Frame 51 Bright chrome plated Tables (235 / / 3) Star base Table column 51 Bright chrome plated Coated, black or white Tables (237 / 00) Foot sections Upright Underframe 49 Coated white Coated white Coated white 51 Bright chrome plated Black coated or bright Coated black chrome plated 53 Coated black Coated black Coated black Tables (237 / 2, 4, 5, 6) Disc base with cover Table column Table top bearer 49 Coated white Coated white Coated black 53 Coated black Coated black Coated black 71 Polished stainless steel coated or bright chrome Coated black plated 55

59 Aline-S Chairs Upholstery material Multi-purpose chair ( 17⅜" 30¾" 21¼" 22⅞") 233/1 Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membrane Frame bright chrome plated 238 Inline connector * 34 Higher backrest (overall height 80 cm, 31½") 17 Seat cushion Seat cushion, stackable version, up to 10 chairs Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Multi-purpose chair ( 17⅜" 30¾" 23¼" 22⅞") 233/2 With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membrane Frame bright chrome plated 278 Inline connector * 34 Higher backrest (overall height 80 cm, 31½") 17 Seat cushion Seat cushion, stackable version, up to 10 chairs Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Counter/bar height stool ( 27⅛" 41⅜" 21¼" 24") 233/4 Footrest, Seat and back frame with plastic membrane Frame bright chrome plated 354 Seat cushion Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Counter/bar height stool ( 27⅛" 41⅜" 21¼" 24") 233/6 With armrests Footrest, Seat and back frame with plastic membrane Frame bright chrome plated 394 Seat cushion Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert * Inline connectors only possible in combination with special multi-purpose glides Black, multipurpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case). On request with black polyamide glides so that the seating can be used on different floorings, optionally with extra felt insert (for flooring that easily scratches like stone or parquet). Stackable chairs with armrests only alternately with stackable chairs that have no armrests. 56

60 Aline Chairs Upholstery material Multi-purpose chair ( 17⅜" 30¾" 21¼" 22⅞") 230/1 Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membrane Frame bright chrome plated 352 Inline connector 43 Higher backrest (overall height 80 cm, 31½") 17 Seat cushion Seat cushion, stackable version, up to 10 chairs Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Outdoor version Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Multi-purpose chair ( 17⅜" 30¾" 23¼" 22⅞") 230/2 With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membrane Frame bright chrome plated 392 Inline connector 43 Higher backrest (overall height 80 cm, 31½") 17 Seat cushion Seat cushion, stackable version, up to 10 chairs Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Outdoor version Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Counter/bar height stool ( 27⅛" 41⅜" 21¼" 24") 230/5 Footrest, Seat and back frames with membrane Frame bright chrome plated 467 Seat cushion Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Outdoor version Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Counter/bar height stool ( 27⅛" 41⅜" 23¼" 24") 230/6 With armrests Footrest, Seat and back frames with membrane Frame bright chrome plated 507 Seat cushion Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Outdoor version Multipurpose glides (for soft and hard floorings) Multi-purpose glides with felt insert Black, multipurpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case). On request with black polyamide glides so that the seating can be used on different floorings, optionally with extra felt insert (for flooring that easily scratches like stone or parquet). Stackable chairs with armrests only alternately with stackable chairs that have no armrests. 57

61 Aline Task/visitor chairs Task chair 40/52 76/ ( 15¾"/20½" 29⅞"/34⅝" 25⅝" 25¼") 232/1 Seat and back frames with membrane, Infinitely variable height adjustment Frame bright chrome plated 564 Higher backrest (overall height 78/90 cm, 30¾"/35⅜") 17 Anti-static castors 45 Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23 Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only) 116 Task chair 40/52 76/ ( 15¾"/20½" 29⅞"/34⅝" 25⅝" 25¼") 232/2 With armrests, Seat and back frames with membrane, Infinitely variable height adjustment Frame bright chrome plated 604 Higher backrest (overall height 78/90 cm, 30¾"/35⅜") 17 Anti-static castors 45 Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23 Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only) 116 Visitor chair ( 17¾" 31½" 19⅝" 22½") 231/1 Seat and back frames with membrane Frame bright chrome plated 540 Higher backrest (overall height 82 cm, 32¼") 17 Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23 Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only) 116 Visitor chair ( 17¾" 31½" 23¼" 22½") 231/2 With armrests, Seat and back frames with membrane Frame bright chrome plated 580 Higher backrest (overall height 82 cm, 32¼", armrests not below table height) 17 Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) 23 Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only) 116 All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). All visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 58

62 Aline Tables Table top group 7 7 Black through-dyed White through-dyed Square 235/1 Low table 60 x 60, H 45 (23⅝" x 23⅝", H 17¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated Square 235/2 Table 70 x 70, H 73 (27½" x 27½", H 28¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated Square 235/3 High table 60 x 60, H 105 (23⅝" x 23⅝", H 41⅜") Star base bright chrome plated Coated column Central column bright chrome plated Stackable design (up to 3 free-standing) Round 236/1 Low table, circular, Ø 75, H 45 (Ø 29½", H 17¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated Round 236/2 Table circular, Ø 75, H 73 (Ø 29½", H 28¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated Round 236/3 High table, circular, Ø 70, H 105 (Ø 27½", H 41⅜") Star base bright chrome plated Coated column Central column bright chrome plated Stackable design (up to 3 free-standing) All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 59

63 Aline Tables Table top group 9 Round 237/2 Table, Ø 90 cm, H 73 cm (Ø 35⅜", H 28¾") Coated disc base Coated column 798 MDF black or white powder coated Disc base with ultra-polished, stainless steel cover, coated table column 87 Disc base with ultra-polished, stainless steel cover, bright chrome plated table column 151 Round 237/4 Table, Ø 110 cm, H 73 cm (Ø 43¼", H 28¾") Coated disc base Coated column 1011 Disc base with ultra-polished, stainless steel cover, coated table column 87 Disc base with ultra-polished, stainless steel cover, bright chrome plated table column 151 Round 237/5 Table, Ø 125 cm, H 73 cm (Ø 49¼", H 28¾") Coated disc base Coated column 1126 Disc base with ultra-polished, stainless steel cover, coated table column 87 Disc base with ultra-polished, stainless steel cover, bright chrome plated table column 151 Round 237/6 Table, Ø 140 cm, H 73 cm (Ø 55⅛", H 28¾") Coated disc base Coated column 1604 Disc base with ultra-polished, stainless steel cover, coated table column 104 Disc base with ultra-polished, stainless steel cover, bright chrome plated table column

64 Aline Tables Table top group 7 7 Black through-dyed White through-dyed Rectangular 237/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾") Foot sections coated Uprights and under-frames coated Foot sections bright chrome plated 61 Uprights bright chrome plated 85 Depth 70 Length (27½") 75 (29½") 80 (31½") 90 (35⅜") 140 (55⅛") (59") (63") (70⅞") (78¾") (55⅛") (59") (63") (70⅞") (78¾") 1301 available not available All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 61

65 58 Aline Accessories Inline connector 231 (for models 230/1 and 230/2) 43 Four-wheeled trolley 232 for 20 multi-purpose chairs 567 Seat/row number clip 234 (for models 230/1 and 230/2) 9 Sheets of self-adhesive labels for numbering set (1 400 for seats and for rows) 19 Four-wheeled trolley 236 for 15 multi-purpose chairs with seat cushion 567 Inline connector 238 (for models 233/1 and 233/2) with glides for soft floorings. 34 (for models 230/1 and 230/2) with glides with felt insert 38 62

66

67 240 range Sito Design: wiege Technical details Function A multipurpose cantilever chair, optionally stackable, with three backrest heights and a range of upholstery options and ideal for a whole host of settings. It s springy and resilient due to the cantilever design of the seat and back. Frame Base frame made of round steel tube, Ø 22 mm (⅞"). Brace in 6 mm (¼ ) flat steel to support the cantilevered the seat and backrest shells, bright chrome plated, matt chrome plated or coated. The standard version for carpeted floors comes with anti-tilt stoppers; with additional glides for hard floors, with additional felt insert on request. The stackable versions are only available with a bright chrome plated frame. All models can also be fitted with a writing tablet (models 240/3, 241/3) in black plastic, which still allows chairs to be linked with inline connectors or stacked. Seat and backrest Models 240/3 and 241/3 Seat and back made of black-grey or white through-dyed viscoelastic polypropylene. Seat with covered, one-piece moulded polyurethane foam, exchangeable; optional back cushioning also with covered, polyurethane cut foam. Model 241/51 with club upholstery Seat and back made of moulded plywood with polyurethane onepiece moulded foam and wool fleece, covered on all sides with leather, leather-covered cushioning with embossed facings on the sides. Model 244/55 Seat and back made of viscoelastic polypropylene, covered on the back. Replaceable seat cushioning with covered polyurethane moulded foam section, with additional cut foam section and padding. Replaceable back cushioning with covered polyether cut foam section and padding. Models 247/55 and 248/55 with soft fill cushions Seat and back made of moulded plywood. Seat with covered polyurethane one-piece moulded foam, backrest with covered polyurethane one-piece moulded foam, on the front with concealed cut foam fleece concealed in the cover. Armrests Armrest pads made of black or white through-dyed polypropylene or laminated wood with face veneer in beech with a natural finish or stained 84/83 grey or 84/89 dark grey, or face veneer in maple with a natural finish. Upholstered armrests, when covered in fabric with black leather 74/99, when covered in leather to match the colour of the leather (models 240/51, 241/51 only covered in leather). Standards The Sito cantilever chairs comply with the DIN EN L1, DIN EN 1728 and ANSI/BIFMA X5.1 office chair standards. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Model 245/55 Seat made of viscoelastic polypropylene, covered on the back. Replaceable seat cushioning with covered polyurethane moulded foam section, with additional cut foam section and padding. Back made of moulded plywood. Back cushioning with covered polyether cut foam section and padding. Frame versions 51 Bright chrome plated 53 Coated black 58 Matt chrome plated 60 Coated, silver satin finish 64

68 Sito Cantilever chairs Upholstery material Low backrest ( 16⅞" 30⅜" 23¼" 22") 240/3 With seat cushion, backrest not upholstered, Polypropylene armrest pads Frame coated Back cushion Seat/back shell and armrest pad through-dyed white Stackable version (in combination with frame bright chrome plated only, stackable 7 high free-standing, up to 8 high on four-wheeled trolley) Frame bright chrome plated Frame matt chrome plated Medium-height backrest ( 16⅞" 34¼" 23¼" 22½") 241/3 With seat cushion, backrest not upholstered, Polypropylene armrest pads Frame coated Back cushion Seat/back shell and armrest pad through-dyed white Stackable version (in combination with frame bright chrome plated only, stackable 7 high free-standing, up to 8 high on four-wheeled trolley) Frame bright chrome plated Frame matt chrome plated Medium-height backrest ( 16⅞" 34¼" 23¼" 22") 241/51 Club upholstery, fully upholstered, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seam Frame coated Frame bright chrome plated Frame matt chrome plated All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 65

69 Sito Cantilever chairs Upholstery material Medium-height backrest ( 16⅞" 34¼" 23¼" 22½") 244/55 With seat and back cushion, fully upholstered, Polypropylene armrest pads Frame coated Frame bright chrome plated Frame matt chrome plated Laminated wood armrest pads Cushioned armrest pads High backrest ( 16⅞" 38¼" 23¼" 22⅞") 245/55 With seat and back cushion, fully upholstered, Polypropylene armrest pads Frame coated Frame bright chrome plated Frame matt chrome plated Laminated wood armrest pads Cushioned armrest pads Medium-height backrest ( 16⅞" 34¼" 23¼" 22½") 247/55 Soft fill cushions, fully upholstered, Polypropylene armrest pads Frame coated Frame bright chrome plated Frame matt chrome plated Laminated wood armrest pads Cushioned armrest pads High backrest ( 16⅞" 38¼" 23¼" 22⅞") 248/55 Soft fill cushions, fully upholstered, Polypropylene armrest pads Frame coated Frame bright chrome plated Frame matt chrome plated Laminated wood armrest pads Cushioned armrest pads All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 66

70 Sito Accessories Writing tablet 240 (right or left side) 176 Inline connector Four-wheeled trolley 243 for eight stackable cantilever chairs 607 Seat numbers

71 249 range Cura Design: wiege Technical details Function With a lightweight appeal, these classically elegant lounge chairs and low tables are designed to furnish lounges, lobbies, informal meeting spaces or homes. Chair Frame Model 249 / 5 Resilient, bright chrome plated steel tube, diameter 25 mm (1"), thickness 3 mm (⅛") attached to flat steel support ing frame, width 25 mm (1"), thickness 6 mm ( 2 / 8 "). Four glides in black-grey polyamide are standard (for soft floors); option ally in black-grey polyurethane (for hard floors), on request with additional felt insert. Model 249 / 7 Die-cast aluminium, high-lustre polished, four-star base with rigid column and steel, bright chrome plated seat bearer. Black multipurpose plastic glides for all types of flooring. Upholstery Steel frame in square tube with tension springs embedded in polyurethane foam. Exchangeable, one-piece cover with side facings in high-quality woollen fabric or leather. Armrests (only model 249 / 5) Armrests with contacts in plywood with fully upholstered pads to match the seat or with walnut face veneer, stained and protected with open-pore lacquer. Stool Frame Die-cast aluminium, high-lustre polished, star base with rigid column and steel, bright chrome plated seat bearer. Black, multi-purpose plastic glides for all types of flooring. Seat Shaped plywood shell with seating cushion, fully covered. Tables Frame Bright chrome plated steel tube, diameter 25 mm (1"), thickness 3 mm (⅛"). Four glides in black-grey polyamide are standard (for soft floors); optionally in black-grey poly ure thane (for hard floors), on request with additional felt insert. Core material of table top Particle board, depending on the surface finish with straight, colourmatched plastic lipping or straight, colour-matched wood lipping. Table top group 1 laminate Table top thickness 20 mm (¾") Laminate according to Wilkhahn laminate colour samples (white, light grey or dark grey) with plastic lipping in the same colour as the table top. Table top group 2 veneer Table top thickness 20 mm (¾") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Veneer version As a standard, veneers are slip matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple, beech veneer. Some specific growth features possible. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Standards The Cura chairs and stools comply with the DIN EN office chair standard and DIN EN Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. 68

72 Cura Chairs Upholstery material Cantilever chair ( 13¾" 29½" 27½" 28") 249/5 Armrest pads in walnut Frame bright chrome plated Additional charge Armrests fully upholstered to match the seat covers Chairs ( 13¾" 29½" 23¼" 28") 249/7 High-lustre polished frame Stool 249/8 60 x 50, H 41 (23⅝" x 19⅝", H 16⅛") High-lustre polished frame Low tables Table top group Laminate Veneer variation Veneer variation Square 249/1 54 x 54, H 36 (21¼" x 21¼", H 14⅛") Frame bright chrome plated Rectangular 249/3 60 x 150, H 36 (23⅝" x 59", H 14⅛") Frame bright chrome plated All cantilever chairs, armchairs and tables are fitted with four glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Stool with multi-purpose glides. 69

73 26 range Modus Basic Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg Technical details Function Task chairs with backrest shell and automatic synchro-adjustment: the seat and backrest angle adjusts automatically to the position of the person sitting on chair. When leaning back, the backrest tension increases proportionately. The person sitting on the chair can adjust the tension precisely. The chair can be locked in the front position by engaging a lever. DIN 4550 compliant gas lift for precision adjustment of the seating height. Frame Task chairs Five-star, die-cast aluminium base, coated, polished or bright chrome plated. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN as the standard version for carpets; with grey soft poly urethane tyre for hard floors. Castors optionally electrically conductive. Die-cast aluminium swing plates, coated in the same colour to match the star base, polished or bright chrome plated. Black-coated sheet steel mechanism cover. Counter stool Star base from the ON 170 range, with additional height-adjustable foot ring, bright chrome plated, with lock screw to affix it and twin wheel swivel castors with load-dependent braking. Seat Seat shell in black, viscoelastic polypropylene. Cushioning: covered polyurethane one-piece moulded foam. Replaceable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover. Backrest Task chairs Backrest shell in black throughdyed, viscoelastic polypropylene with replaceable back cushioning in covered, cut foam and with integrated, adjustable lumbar support on request. Armrests Task chairs Armrests in black, glass-fibre-reinforced polyamide. Task chair models 263/7 also with height adjustable armrests in the same material. Standards The Modus Basic task chairs comply with the DIN EN 1335, ANSI / BIFMA X 5.1 and other international office chair standards. They meet the requirements of category B of the DIN EN 1335 office chair standard. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions Task chairs Star base and swing arms 51 Bright chrome plated 52 Aluminium polished 53 Coated black 60 Coated, silver satin finish Small components Castors, glides, frame components, adjustment levers 41 Black 70

74 Modus Basic Task chairs Counter chairs Upholstery material Standard height backrest 42/53 91/ ( 16½"/20⅞" 35⅞"/40⅛" 25¼" 24") 263/7 With seat and back cushion, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Height-adjustable lumbar support Anti-static castors Without armrests Counter chair 62/75 111/ ( 24⅜"/29½" 43¾"/48⅞" 25¼" 24") 263/1 With seat and back cushion, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable) Frame aluminium coated Additional charge/reduced prices Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Height-adjustable lumbar support Without armrests All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. 71

75 27 range Modus Compact Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg Technical details Function Task chairs with frame covering and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engag ing lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Conference chairs / visitor chairs, swivel, with automatic synchroadjustment, without front locking position, with fixed seat height, alternatively also available in a four-legged version or in a cantilever version, optionally stackable. Frame Task, conference and visitor chairs Die-cast aluminium star base, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swivel plates, coated to match the star base, polished or bright chrome plated. Synchro-mechanism case in sheet steel, coated black. Visitor chair, four-legged: Legs in oval aluminium tube, bright chrome plated, clear anodized or coated. Black polyamide glides as the standard version for carpeted floors, or in black polyurethane for hard floors, optionally with additional felt insert. Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or coated, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. The stackable version is available with a bright chrome plated frame only. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover. Backrests Task, conference and visitor chairs Frame in black, glass fibre-reinforced polyamide. Exchangeable frame covering in black polyamide fabric, non-transparent or transparent. Non-transparent material optionally covered on the front and with cut foam underlay. Standard and medium-height backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover. High backrest with a shoulder support with a forward curvature, covered in embossed leather for fabric cover; in the same colour leather for leather cover. Backrests of task chairs 273, 274 and 275 optionally with integral, adjustable lumbar support (not possible for version with transparent material). Cantilever chairs Frame in steel tube, bright chrome plated, matt chrome plated or coated. Exchangeable frame covering in black polyamide fabric, non-transparent or transparent. Non-transparent material optionally covered on the front and with cut foam underlay. Cantilever chairs 277/7 and 279/7 with a crescent shaped grip in black polypropylene; version with semi transparent material with a crescent shaped grip covered in black embossed leather for fabric or leather cover. Covered backrest with crescent shaped grip in black embossed leather for fabric cover; in the same colour leather for leather cover. Armrests Task, conference and visitor chairs Armrests in black, glass fibre-reinforced polyamide, optionally height adjustable. Visitor chairs, four-legged Armrests in black, glass fibrereinforced polypropylene. Cantilever chairs Armrest pads in black polypropylene or laminated beech, natural finish. Standards Modus Compact task chairs and conference chairs / visitor chairs conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category B of the Office Chair Standard DIN EN Modus cantilever chairs and four-legged visitor chairs conform to DIN EN L1 and ANSI / BIFMA X 5.1. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions Task chairs Star base, swing plates 51 Bright chrome plated 52 Aluminium polished 53 Coated black 60 Coated, silver satin finish Visitor chairs Oval aluminium tube frame 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish 62 Clear anodized Cantilever chair Round steel tube frame 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish Small components Castors, glides, frame components, adjustment levers 41 Black 72

76 Modus Compact Task chairs Upholstery material Standard height backrest 42/53 91/ ( 16½"/20⅞" 35⅞"/40⅛" 25¼" 24") 273/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Transparent material (without additional charge) Height-adjustable lumbar support Anti-static castors Without armrests Medium-height backrest 42/53 98/ ( 16½"/20⅞" 38⅝"/42⅞" 25¼" 24") 275/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Transparent material (without additional charge) Height-adjustable lumbar support Anti-static castors Without armrests available All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support. 73

77 Modus Compact Task chairs Counter chairs Upholstery material High backrest 42/53 106/ ( 16½"/20⅞" 41¾"/46⅛" 25¼" 24") 274/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Transparent material (without additional charge) Height-adjustable lumbar support Anti-static castors Without armrests Counter chair 62/75 111/ ( 24⅜"/29½" 43¾"/48⅞" 25¼" 24") 273/1 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring, bright chrome-plated (precision height-adjustable) Frame aluminium coated Additional charge/reduced prices Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material (without additional charge) Without armrests available All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in combination with back cushion. 74

78 Modus Compact Conference/visitor chairs Upholstery material Standard height backrest ( 18⅛" 37⅜" 25¼" 24") 271/7 Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge/reduced prices Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material (without additional charge) Without armrests Medium-height backrest ( 18⅛" 40⅛" 25¼" 24") 272/7 Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension control Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material (without additional charge) Standard height backrest ( 16⅞" 34⅝" 22½" 22") 276/7 Backrest with non-transparent stretch material Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium clear anodized Frame aluminium bright chrome plated Transparent material available All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in combination with back cushion. 75

79 Modus Compact Cantilever chairs Upholstery material Standard height backrest ( 16⅞" 33½" 22½" 22") 277/7 Backrest with non-transparent material, Polypropylene armrests Frame coated Backrest upholstered on the front Backrest covered on outer side Frame bright chrome plated Frame matt chrome plated Armrests with embossed leather pad (cannot be offered on stackable version) Wooden armrests Transparent material Stackable version (in combination with frame bright chrome plated only, stackable 5 high free-standing) Medium-height backrest ( 16⅞" 36¼" 22½" 22") 279/7 Backrest with non-transparent material, Polypropylene armrests Frame coated Backrest upholstered on the front Backrest covered on outer side Frame bright chrome plated Frame matt chrome plated Armrests with embossed leather pad (cannot be offered on stackable version) Wooden armrests Transparent material Stackable version (in combination with frame bright chrome plated only, stackable 5 high free-standing) All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion. 76

80 Modus Compact Accessories Four-wheeled trolley 277 for 6 stackable cantilever chairs

81 28 range Modus Medium Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg Technical details Function Task chairs with backrest with stretch material and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engaging lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Swivel-mounted conference / visitor chairs with automatic synchro adjustment and infinitely variable height adjustment, optionally with rigid, four-arm seat bearer; alternatively also as a cantilever version. Frame Task chairs Die-cast aluminium star base, coated, polished or bright chrome plated. Conference/visitor chairs with four-star base in die-cast aluminium, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, coated to match the star base, polished or bright chrome plated. Synchro-mechanism case in sheet steel, coated black. Conference chairs / visitor chairs Model 281/5 with four arm seat bearer in die-cast aluminium, coated in the same colour, polished or bright chrome plated to match star base. Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or coated, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover. Backrests Task and conference chairs Frame in black, glass fibre-reinforced polyamide. Exchangeable frame covering in black polyamide material, non-transparent or transparent, non-transparent version with underpadding. Non-transparent material optionally additionally covered on the front and with cut foam underlay. Standard backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover. High backrest with a shoulder support with a forward curvature, covered in embossed leather for fabric cover; in the same colour leather for leather cover. Task chairs optionally available with height-adjustable lumbar support. Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or colour coated. Exchangeable frame covering in black polyamide material, nontransparent or transparent. Nontransparent material optionally covered on the front and with cut foam underlay. Crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover. Armrests Task and visitor chairs Armrests in black, textured, glass fibre-reinforced polyamide. On request, with black, embossed leather pad for fabric cover; in the same colour leather for leather cover. On request, with armrests in die-cast aluminium, aluminium polished or bright chrome plated with black leather pad for fabric cover; in the same colour leather for leather cover. Cantilever chairs Armrest pads in laminated beech, natural finish, optionally in polypropy lene with black, embossed leather pad for fabric cover; in the same colour leather for leather cover. Standards Modus Medium task chairs and conference chairs / visitor chairs conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category C of the Office Chair Standard DIN EN Modus cantilever chairs conform to DIN EN L1 and ANSI / BIFMA X 5.1. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions Task chair and visitor chair Star base, swing plates 51 Bright chrome plated 52 Aluminium polished 53 Coated black 60 Coated, silver satin finish Cantilever chair Round steel tube frame 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish Small components Castors, glides, frame components, adjustment levers 41 Black 78

82 Modus Medium Task chairs Upholstery material Standard height backrest 42/53 91/ ( 16½"/20⅞" 35⅞"/40⅛" 26¾" 24¾") 283/7 With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Lumbar support for task chairs Anti-static castors High backrest 42/53 112/ ( 16½"/20⅞" 44⅛"/48⅜" 26¾" 24¾") 284/7 With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Lumbar support for task chairs Anti-static castors All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support. 79

83 Modus Medium Conference/visitor chairs Upholstery material Standard height backrest ( 17¾" 37" 24" 23¼") 281/5 Swivel-mounted, with rigid seat bearer, With seat cushion, Backrest with non-transparent material, Armrests polyamide Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Standard height backrest 45/56 94/ /6 Swivel-mounted, with seat cushion, ( 17¾"/22" 37"/41⅜" 24" 23¼") Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Backrest upholstered on the front Backrest covered on outer side Frame aluminium polished Frame aluminium bright chrome plated Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion. 80

84 Modus Medium Cantilever chairs Upholstery material Standard height backrest ( 16⅞" 35⅞" 25⅝" 22") 287/7 With seat cushion, Backrest with non-transparent material, Armrests laminated beech Frame coated Backrest upholstered on the front Backrest covered on outer side Frame bright chrome plated Frame matt chrome plated Armrests with embossed leather pad Transparent material All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 81

85 28 range Modus Executive Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg Technical details Function Task chairs with luxurious backrest cushion and automatic synchroadjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engaging lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Swivel-mounted conference / visitor chairs with automatic synchro-adjustment and infinitely variable height adjustment, optionally with rigid, four-arm seat bearer; alternatively also as a cantilever version. Frame Task chairs Die-cast aluminium five star base, coated, polished or bright chrome plated. Conference / visitor chairs with fourstar base in die-cast aluminium, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, compliant with DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft cover for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, polished or bright chrome plated to match the star base. Sheet steel, black-coated synchro technology shell. Conference and visitor chair model 281/91 with four-arm seat bearer in die-cast aluminium, polished or bright chrome plated to match four-star base. Cantilever chairs Frame in round steel tube, bright chrome plated or matt chrome plated, with anti-tilt stoppers as the stand ard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing in embossed leather in the same colour for leather cover. Backrests Task chairs and visitor chairs Frame in black, glass fibre-reinforced polyamide. Exchangeable frame covering in black polyamide material, with slim leather-covered cushion on seat and backrest. On request, outer side of backrest frame with cover. Standard height backrest with a straight edge. High backrest with shoulder support with a forward curvature, with slim, leather-covered cushion. Cantilever chairs Steel tube frame, bright chrome plated or matt chrome plated to match frame. Exchangeable frame covering in black polyamide material, with slim leather-covered cushion on seat and backrest. On request, outer side of backrest frame with leather cover. Backrest with a straight edge. Armrests Task chairs Armrests in black, textured, glass fibre-reinforced polyamide, with additional embossed leather pad in the same colour leather. Optionally, with armrests in diecast aluminium, aluminium polished or bright chrome plated with leather pad and triple-sewn seam in the same colour leather. Conference / visitor chairs Armrests in die-cast aluminium, aluminium polished or bright chrome plated, with leather pad and triple-sewn seam in the same colour leather. Cantilever chairs Armrest pads covered in the same colour leather. Standards Modus Executive task chairs and conference chairs / visitor chairs conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category C of the Office Chair Standard DIN EN Modus Executive cantilever chairs conform to DIN EN L1 and ANSI / BIFMA X 5.1. Please note: The prices for types with cushioning leather provided by the customer are given on request. Frame versions Task chair and visitor chair Star base, swing plates 51 Bright chrome plated 52 Aluminium polished Cantilever chair Round steel tube frame 51 Bright chrome plated 58 Matt chrome plated Small components Castors, glides, frame components, adjustment levers 41 Black 82

86 Modus Executive Task chairs Upholstery material Standard height backrest 42/53 91/ ( 16½"/20⅞" 35⅞"/40⅛" 26¾" 25⅝") 283/81 Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium polished Additional charge Backrest covered on outer side Frame aluminium bright chrome plated Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Anti-static castors High backrest 42/53 112/ ( 16½"/20⅞" 44⅛"/48⅜" 26¾" 25⅝") 284/81 Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium polished Additional charge Backrest covered on outer side Frame aluminium bright chrome plated Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Anti-static castors All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. 83

87 Modus Executive Conference/visitor chairs Upholstery material Standard height backrest ( 17¾" 37⅜" 24" 23¼") 281/91 Swivel-mounted, with rigid seat bearer, Seat and backrest with slim, leather-covered cushion Armrests aluminium polished with leather pad, Frame aluminium polished Backrest covered on outer side Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated Standard height backrest 45/56 95/ ( 17¾"/22" 37⅜"/41¾" 24" 23¼") 281/93 Swivel-mounted, Seat and backrest with slim, leather-covered cushion, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Armrests aluminium polished with leather pad, Frame aluminium polished Backrest covered on outer side Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated All conference and visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 84

88 Modus Executive Cantilever chairs Upholstery material Standard height backrest ( 16⅞" 35⅞" 25⅝" 24") 287/81 Seat and backrest with slim, leather-covered cushion, Armrests leather-covered Frame bright chrome plated Backrest covered on outer side Frame matt chrome plated All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). 85

89 290 range Sola Design: Justus Kolberg Licensor for products and sales: Davis Furniture, NC, US Technical details Function The conference chair fuses innovative comfort with crisp design and a top quality appeal. The chair s aesthetic is defined by the linear shape of the seat shell and the linear aluminium frame which branches out from the centre column into a V- shaped support that culminates in the armrests. The slender seat shell is swivelmounted at the front and connected with a V-shaped support by two pressure springs at the back. As a result, the chair rocks back and forward comfortably without any extra mechanical parts required. The sprung pressure can easily be adjusted to suit personal levels of comfort and body weight. DIN compliant gas lift for precision adjustment of the seating height. Traditional conference and meeting rooms, for managerial offices and executive boardrooms, highquality restaurants or prestigious dining areas. Frame Die-cast aluminium five-star base, high-lustre polished and coated matt black or silver satin finish. Round, black, polyamide multipurpose glides for all types of flooring. For wooden floorings (e.g. parquet) please order with extra felt insert. Optionally with castors. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN as the standard version for carpets; with grey soft polyurethane tyre for hard floors. These castors change the seating height or adjustment range to cm. The gas lift is covered by bright chrome-plated protective tube, coated matt black or in a silver satin finish. When the star base is aluminium high-lustre polished, the protective tube is bright chrome plated. V-shaped die-cast aluminium support, high-lustre polished like the star base, coated matt black or in silver satin finish. Lever for adjusting the seating height, coated matt black or in silver satin finish. When the star base is aluminium high-lustre polished, the lever is bright chrome plated. Seat and back Unitary seat and backrest shell made of moulded plywood and covered on the rear. Liner made of padded cut foam. Management grade upholstery also with facing all the way round and with quilted stitching. Armrests Die-cast aluminium armrests the same as the frame, optionally with additional plastic armrest pad. Chairs with management grade upholstery also come with optional leather-covered armrest pads which are only available in the same colour and in combination with leather type 74 or 87. Standards The Sola conference chair complies with DIN EN L1 and ANSI BIF- MA X 5.1. Frame versions Star base, V shaped support, armrests Protective tube, lever for gas lift 60 Coated, silver satin finish Coated, silver satin finish 72 Aluminium high-lustre polished Bright chrome plated 80 Black matt coating Black matt coating 86

90 Sola Conference chair Upholstery material Medium-height backrest 44/53 101/ ( 17⅜"/20⅞" 39¾"/43¼" 26⅜" 26¾") 291/7 One-piece seat and back shell, fully upholstered, With armrests, Infinitely variable height adjustment Frame aluminium coated Plastic armrest pad Frame aluminium high-lustre polished Castors (45 51 cm seating height) Medium-height backrest 44/53 101/ ( 17⅜"/20⅞" 39¾"/43¼" 26⅜" 26¾") 291/71 Seat and back with management grade upholstery, With armrests, Infinitely variable height adjustment Frame aluminium coated Plastic armrest pad Leather-covered armrest pad Frame aluminium high-lustre polished Castors (45 51 cm seating height)

91 30 range Graph Design: jehs + laub Technical details Function Distinctive, high-end, standalone conference chair in two backrest heights. Armrests stylishly link the seat and backrest. Exceptional, sprung (and at the sides also elastic) seating comfort due to three-point support with rear spring strut and sophisticated upholstery technique. Can be used in traditional conference and meeting rooms, executive offices and boardrooms, high-quality restaurants or prestigious dining areas. Frame Models 301/5/302/5: Die-cast aluminium four-star base coated in black or signal white, matt polished or bright chrome plated. Black, multipurpose glides made of plastic for all types of flooring. Optionally with base glides with larger contact area for sensitive floorings, either to match the star base black or signal white coated, matt chrome-plated (polished star base) or bright chrome plated (bright chrome-plated star base). Black polyamide glides for carpets. For hard floors (e.g. stone), please order with soft TPU, for wooden floors (e.g. parquet) with additional felt. These glides change the seating height to 44 cm (17⅜"). Optionally with castors for four-star bases compliant with DIN EN 1335 and ANSI BIFMA X 5.1 for conference chairs. Twin wheel swivel castors with load-dependent braking made of black polyamide compliant with DIN EN 12529, with black polyurethane tyre for both hard and soft floors: black plastic casing for the castors with chrome-plated ring (coated star base), matt chrome-plated ring (matt polished star base) or chrome-plated ring (bright chrome-plated star base). These castors change the seating height to 45 cm (17¾"). Swivel-mounted column with Y- shaped seat bearer made of diecast aluminium, coated in black or signal white, matt polished or bright chrome plated to match the star base. Permanently elastic, rubber/metal connecting elements. Sprung elastic strut made of top-quality spring steel in black. Models 301/6, 302/6, 301/7, 302/7: Die-cast aluminium five-star base coated in black or signal white, matt polished or bright chrome plated, with castors for five-star bases compliant with DIN EN 1335 and ANSI BIFMA X 5.1 standards for conference chairs. Twin wheel swivel castors with load-dependent braking made of black polyamide compliant with DIN EN 12529, with black polyurethane tyre for both hard and soft floors: black plastic casing for the castors with chromeplated ring (coated star base), matt chrome-plated ring (matt polished star base) or chrome-plated ring (bright chrome-plated star base). All models with Y-shaped seat bearers made of die-cast aluminium, coated in black or signal white, matt polished or bright chrome plated to match the star base. Permanently elastic, rubber/metal connecting elements. Sprung elastic strut made of top-quality spring steel in black. Models 301/6 and 302/6 with swivel-mounted columns. Models 301/7 and 302/7 with precision-adjustable seating height via a gas lift. Seat and back Seat and back frame made of metal, with wave springs, additional cushioning and fully padded with polyurethane. Armrests Armrests that connect the seat and back made of die-cast aluminium and to match the frame black or signal white coated, matt polished or bright chrome plated. Standards The Graph chairs comply with the DIN EN 16139, DIN EN 1728 and ANSI/BIFMA X 5.1 standards. Please note The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Frame versions 5 star base Gas lift (Models 301/7 and 302/7) 49 Coated signal white Bright chrome plated 51 bright chrome plated Bright chrome plated aluminium 53 Coated black Coated black 79 Matt polished aluminium Bright chrome plated Small components Castors Base glide 49 black plastic shell with chrome colour matched black or white coated plated ring 51 black plastic shell with chrome Bright chrome plated plated ring 53 black plastic shell with chrome colour matched black or white coated plated ring 79 black plastic shell with matt chrome plated ring Matt chrome plated 88

92 Graph Conference chair Upholstery material Medium-height backrest ( 16⅞" 40⅛" 24⅜" 25¼") 301/5 Swivel-mounted, one-piece seat and back frame, fully upholstered, with armrests Frame aluminium coated Swivel-return mechanism Matt polished aluminium frame Frame aluminium bright chrome plated Base glides (44 cm seating height) Castors (45 cm) seating height High backrest ( 16⅞" 49¼" 24⅜" 25¼") 302/5 Swivel-mounted, one-piece seat and back frame, fully upholstered, with armrests Frame aluminium coated Swivel-return mechanism Matt polished aluminium frame Frame aluminium bright chrome plated Base glides (44 cm seating height) Castors (45 cm) seating height

93 Graph Conference chair Upholstery material Medium-height backrest ( 17¾" 41" 24⅜" 25¼") 301/6 One-piece seat and back frame, fully upholstered, with armrests Frame aluminium coated Matt polished aluminium frame Frame aluminium bright chrome plated High backrest ( 17¾" 50" 24⅜" 25¼") 302/6 One-piece seat and back frame, fully upholstered, with armrests Frame aluminium coated Matt polished aluminium frame Frame aluminium bright chrome plated

94 Graph Conference chair Upholstery material Medium-height backrest 41/51 100/ ( 16⅛"/20⅛" 39⅜"/43¼" 24⅜" 25¼") 301/7 One-piece seat and back frame, fully upholstered, With armrests, Infinitely variable height adjustment Frame aluminium coated Matt polished aluminium frame Frame aluminium bright chrome plated High backrest 41/51 123/ ( 16⅛"/20⅛" 48⅜"/52⅜" 24⅜" 25¼") 302/7 One-piece seat and back frame, fully upholstered, With armrests, Infinitely variable height adjustment Frame aluminium coated Matt polished aluminium frame Frame aluminium bright chrome plated

95 300 range Graph Design: jehs + laub Technical details Function A high-quality table system for traditional conference and executive workspaces. Frame Table legs are made of bright chrome-plated aluminium, matt polished chrome, or coated in black, or signal white. Table crossbeams/underframes are made of aluminium extruded profile, colour matched with the table legs (except for model 300/50, reinforcement underframes on the inside are always black). Table top bearers to connect the table top area made of black-coated steel, except when the frame is coated white, the table top bearer is coated white. Adjustable table glides (10 mm) are made of steel, the glide cover is made of die-cast zinc, surface the same as the frame, with glide insert made of polyamide for soft floorings and polyurethane for hard floorings or with felt insert. Table tops Medium density fibreboard (MDF). Table top group 2 veneer Table top thickness 26 mm (1") Variation 1: Veneers made of beech, oak or ash based on the Wilkhahn woodstain colour samples with colour matched and symmetrically curved table edge, protected with colourless natural wood varnish. Variation 2: veneers made of maple, walnut or elm as well as Wilkhahn Mocca veneer with colour-matched and symmetrically curved table edge, protected with colourless natural wood varnish. Table top group 6 - varnished Table top thickness 25 mm (1") Varnished in white or black with colour matched and symmetrically curved table edge. Accessories Cable channel Cable channel made of aluminium extruded profile, retractable, coated black. Single table portal opening lengthways and crossways Portal opening lengthways, bevelled on both of the long sides (can be used on both sides), gas-lift damped automatic opening mechanism, portal on both sides in the same colour and material as the table. Single table portal: 300 x 165 mm (11¾ x 6½") Portal opening sideways, bevelled on one long side (can be used from one side), gas-lift damped automatic opening mechanism, portal on both sides in the same colour and material as the surface of the table. Single table portal: 300 x 165 mm (11¾ x 6½") Standards The Graph tables comply with the DIN EN 527 and the ANSI / BIFMA X 5.5 standards. Single table portal basic: Aluminium installation frame with portal and brushed profile. Single table portal: 300 x 120 mm (11¾ x 4¾") Vertical cable management Flexible black cable sheath. Length including table attachment and floor panel approx. 75 cm. Edge profiles symmetrically curved (table top group 2 and 6) Frame versions Legs, crossbeams, underframes Table top bearers 49 Coated signal white Coated signal white 51 bright chrome plated aluminium Coated black 53 Coated black Coated black 76 Chrome, matt-polished Coated black 92

96 Graph Tables Table top group varnished Veneer variation 1 Veneer variation 2 300/ x 200, H 73 (47¼" x 78¾", H 28¾") for 6 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 1 single table portal opening lengthways /05 1 single table portal basic Socket strip, strain anchor, vertical cable management, see accessories on page / x 240, H 73 (47¼" x 94½", H 28¾") for 6 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 1 single table portal opening lengthways /05 1 single table portal basic Socket strip, strain anchor, vertical cable management, see accessories on page / x 280, H 73 (51⅛" x 110¼", H 28¾") for 8 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 2 single table portals opening lengthways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

97 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/ x 540, H 73 (90½" x 212⅝", H 28¾") for 16 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 8 singletable portals opening sideways /05 8 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

98 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/ x 620, H 73 (90½" x 244⅛", H 28¾") for 18 persons, consisting of 6 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 10 singletable portals opening sideways /05 10 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

99 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/ x 700, H 73 (90½" x 275⅝", H 28¾") for 20 persons, consisting of 6 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 12 singletable portals opening sideways /05 12 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

100 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 t 300/ x 780, H 73 (90½" x 307⅛", H 28¾") for 22 persons, consisting of 6 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 12 singletable portals opening sideways /05 12 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

101 Graph Tables Table top group varnished Veneer variation 1 Veneer variation 2 300/30 Ø 125, H 73 (Ø 49¼", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish /30 Ø 150, H 73 (Ø 59", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish /40 Ø 210, H 73 (Ø 82⅝", H 28¾") for 8 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 2 singletable portals opening sideways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

102 Graph Tables Table top group varnished Veneer variation 1 Veneer variation 2 300/50 Ø 300, H 73 (Ø 118⅛", H 28¾") for 12 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 4 singletable portals opening sideways /05 4 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

103 Graph Tables Table top group varnished Veneer variation 1 Veneer variation 2 300/ x 120, H 73 (47¼" x 47¼", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish / x 190, H 73 (47¾" x 47¾", H 28¾") for 8 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 2 singletable portals opening sideways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page / x 280, H 73 (110¼" x 110¼", H 28¾") for 12 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /02 4 singletable portals opening sideways /05 4 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

104 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/14 Starting element 150 x 190, H 73 (59" x 74¾", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 1 single table portal opening lengthways /05 1 single table portal basic Socket strip, strain anchor, vertical cable management, see accessories on page /14 Starting element 150 x 270, H 73 (59" x 106¼", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 2 single table portals opening lengthways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

105 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/16 Intermediate element 150 x 160, H 73 (59" x 63", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 1 single table portal opening lengthways /05 1 single table portal basic Socket strip, strain anchor, vertical cable management, see accessories on page /16 Intermediate element 150 x 240, H 73 (59" x 94½", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 2 single table portals opening lengthways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

106 Graph Table configurations Table top group varnished Veneer variation 1 Veneer variation 2 300/15 Finishing element 150 x 190, H 73 (59" x 74¾", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 1 single table portal opening lengthways /05 1 single table portal basic Socket strip, strain anchor, vertical cable management, see accessories on page /15 Finishing element 150 x 270, H 73 (59" x 106¼", H 28¾") Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Cable channel /01 2 single table portals opening lengthways /05 2 single table portals basic Socket strip, strain anchor, vertical cable management, see accessories on page

107 Graph Accessories Socket strips 300/03 with insertion platesand strain anchor*, with 4 modules, 3 x power supply modules, 1 x data module 297 When ordering state local standard * incl. fastening material Socket strips 300/04 with insertion plates and strain anchor*, with 4 modules, 2 x power supply modules, 1 x data module,1 x HDMI connector 625 When ordering state local standard * incl. fastening material Vertical cable management 300/ Strain anchor for cable channel 300/06 with insertion plate* (2 items) 43 * incl. fastening material 104

108

109 340 range Chassis Design: Stefan Diez Technical details Function Four-legged, lightweight multipurpose chair for conference rooms, informal meeting areas, cafeterias, showrooms, lobbies, hotels or dining rooms. Frame Frame made of three-dimensional, deep-drawn, extremely strong sheet steel, coated in graphite black, cement grey, grey-white, signal white, flame red, brown-green. Black, multi-purpose glides made of plastic for all types of flooring. Seat and back Unitary seat and backrest shell made of finely grained plastic (model 341/1), or with textile cover (model 341/5), or fully upholstered with cut foam, leather covered, shell covered with leather at the rear (model 341/6). Standards The Chassis multi-purpose chairs comply with the DIN EN standard. Model 341/7 (outdoor design) with extra coating to protect from corrosion. Only in conjunction with a black coated frame and black seat shell. Only the combinations listed in the following matrix are possible. Seat and back shell RAL 9011 Graphite black RAL 7023 Cement grey RAL 9002 Grey-white Polyamide Black Grey White Frame colour Seat and back shell RAL 9011 Graphite black RAL 7023 Cement grey RAL 9002 Grey-white RAL 9003 Signal white RAL 3000 Flame red RAL 6008 Brown-green Textile cover Grey-beige C2 / 20 Grey-black C2 / 21 Black C2 / 22 Red-beige C2 / 23 Olive-beige C2 / 24 Sand C3 / 30 Black-grey C3 / 31 Light grey C3 / 32 Graphite C3 / 33 Ruby red C3 /

110 Chassis Multi-purpose chair Upholstery material C2 C3 74 Multi-purpose chair ( 16½" 30⅜" 21¼" 22⅞") 341/1 Stackable 4 high free-standing Frame coated 284 Multi-purpose chair ( 16½" 30⅜" 21¼" 22⅞") 341/5 with textile cover Not stackable Frame coated Multi-purpose chair ( 16½" 30⅜" 21¼" 22⅞") 341/6 leather-covered fully upholstered, Not stackable Frame coated 571 Outdoor multi-purpose chair ( 16½" 30⅜" 21¼" 22⅞") 341/7 Stackable 4 high free-standing Frame coated

111 361 range Ceno Design: Läufer + Keichel Technical details Function Four-leg, stackable conference chair for conference rooms, as well as high-quality restaurant and canteen spaces. Frame Frame in solid aluminium, bright chrome plated or coated in silver satin finish or black. Black, multipurpose glides made of plastic for all types of flooring, optionally with extra felt glides. Seat and back Seat frame in die-cast aluminium, bright chrome plated or coated in silver satin finish or black. Elastic backrest shell in polypropylene, reinforced with two hexagonal rods connecting the seat and back. Backrest shell fully padded with polyurethane. Seat cushion made of polyurethane moulded foam; seat pan in black through-dyed plastic. Back- and seat cushion replaceable. Two-part, replaceable cover. Armrests Armrests in black polyamide. Standards Ceno conference chairs: compliant with DIN EN L1, DIN EN 1022 and ANSI/BIFMA X 5.1 standards. Accessories Optional stainless steel inline connector. Optionally model 361, short inline connector for linking chairs without armrests and chairs with armrests alternately with chairs without armrests or model 362 long inline connector for linking chairs with armrests. Frame versions Frame 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish 108

112 Ceno Conference chairs Upholstery material Medium-height backrest ( 18½" 31½" 20½" 21¼") 361/5 With seat and back cushion, Stackable 8 high free-standing Frame aluminium coated Additional charge Frame aluminium bright chrome plated Medium-height backrest ( 18½" 31½" 22⅞" 21¼") 361/6 Armrests polyamide With seat and back cushion Stackable 8 high free-standing Frame aluminium coated Additional charge Frame aluminium bright chrome plated High backrest ( 18½" 33½" 20½" 21¼") 362/5 With seat and back cushion, Stackable 8 high free-standing Frame aluminium coated Additional charge Frame aluminium bright chrome plated High backrest ( 18½" 33½" 22⅞" 21¼") 362/6 Armrests polyamide With seat and back cushion, Stackable 8 high free-standing Frame aluminium coated Additional charge Frame aluminium bright chrome plated Black, multi-purpose plastic glides for all types of flooring, for wooden flooring (e.g. parquet) please order with extra felt glides (at no additional charge in each case). 109

113 Ceno Accessories Two-wheeled cart 360 for 8 stackable conference chairs 568 Inline connector set short 361 for linking chairs without armrests and chairs with armrests alternately with chairs without armrests 37 Inline connector set long 362 for linking chairs with armrests 40 Seat numbers 363 magnetic seat numbers 1 set (10 consecutive numbers)

114

115 440 range Confair Design: wiege, Fritz Frenkler, Justus Kolberg Technical details Function Mobile, modular furniture range for multi-functional communication environments with dynamic, self-organized teamwork. Mobile desk Frame Polished die-cast aluminium base. Black polyamide castors and glides. Oval aluminium profile column, clear anodized or coated in black or silver satin finish. Writing tablet Birch plywood, fixed to column with tilt / fold function. Back and front edge of desk top finished with a raised, black polypropylene lipping. Finishes Desk top group 1 laminate Top thickness 11 mm (⅜") Laminate according to Wilkhahn colour and surface finish samples. Edging, natural oiled finish. Desk top group 2 veneer Top thickness 11 mm (⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Veneer version As a standard, veneers are processed by slip-match method onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Server Frame Die-cast aluminium base, polished or coated in black or silver satin finish, with four twin wheel swivel castors in black polyamide. Aluminium profile column and cable management cover, clear anodized or coated in the same colour as the base. Black polypropylene handle. Top shelf and box brackets Die-cast aluminium, coated black. Top shelf One-piece sheet steel with black textured coating. Box Base: one-piece sheet steel with black textured coating. Birch plywood body and front. Box with drawer Birch plywood body and front. Base: one-piece sheet steel with black textured coating. Solid beech drawer with natural finish, on steel runners. Internal measurements of drawer 37 x 37 cm (14 5 / 8 " x 14 5 / 8 "). Lid in one-piece sheet steel with black textured coating. Body group 1 laminate Top thickness 12 mm (½") Laminate according to Wilkhahn colour and surface finish samples. Lipping, natural oiled finish. Body group 2 veneer Top thickness 12 mm (½") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Please note: Maximum load capacity with even weight distribution: 60 kg in total for server, 20 kg each for top shelves, boxes, and 20 kg for box with drawer max. 6 kg inside drawer. Accessories Four-wheeled trolley 112

116 Lectern Frame Similar to server, but with two twin wheel swivel castors and two glides in black polyamide. Lectern top Birch plywood, front finished with raised, black polypropylene lipping. Surfaces Group 1 laminate Top thickness 11 mm (⅜") Laminate according to Wilkhahn colour and surface finish samples. Lipping, natural oiled finish. Group 2 veneer Top thickness 11 mm (⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Front panel Perforated steel in black or silver satin finish. Unperforated upper edge for com pany logos max. 115 x 426 mm (4½" x 16¾"). Accessories Additional shelf, width 45 cm (17¾"), depth 35 cm (13¾"). Pinboard / Whiteboard Stand Feet in polished die-cast aluminium. Glides in black polyamide. Frame optionally with four lockable black castors. Frame Aluminium profile sides and braces, clear anodized or coated in silver satin finish or black. Board cover pinboard Double-sided, grey felt covering. With anthracite polyether foam pinstrip. Board cover whiteboard One side covered in grey felt, one side in white enamelled sheet steel, suitable for magnets, can be dry wiped and used as a projection screen. Accessories Four-wheeled trolley Whiteboard starter kit Flipchart Frame Model 442/1 Foldable, three-legged easel in aluminium profile, bright chrome plated, clear anodized or coated in black or silver satin finish. Hinges and glides in black polyamide. Frame optionally with three castors in black, rear castor lockable (with this version, the frame is not foldable). Writing panel made of MDF (Medium-Density Fibreboard) directly coated with melamine resin. Thickness 13 mm (½"), surfaced with laminate (colour 24/89), height-adjustable in three positions; removable. Two pins to hold standard flipchart paper; with black polyamide paper holder. Aluminium profile pentray, clear anodized or coated in the same colour as the frame. 113

117 Confair Mobile desk, Flipchart, Pinboard/whiteboard Body group/table top group Laminate Veneer variation 1 Veneer variation 2 Mobile desk ( 28¾" 18⅞" 17¾") 441/1 Stackable Foot aluminium polished, column aluminium coated Additional charge Foot aluminium polished, Column aluminium clear anodized Flipchart 180/ ( 70⅞"/78¾" 29½" 26⅜") 442/1 Foldable, Writing surface, height adjustable Legs and pentray aluminium coated 644 Legs and pentray aluminium clear anodized 36 Legs aluminium bright chrome plated, Pentray aluminium, clear anodized 98 Mobile version on castors (frame not foldable) 209 Pinboard/whiteboard ( 74¾" 49¼" 21¼") 443/1 Pinboard, stackable, Both sides covered in grey felt, With pinstrip model 449 Foot sections aluminium polished, Frame aluminium coated 636 Foot sections aluminium polished, Frame aluminium clear anodized 35 Version with castors /3 Whiteboard, stackable, One side covered in grey felt, One side in white enamelled sheet steel, suitable for magnets, For use with dry-wipe markers, Suitable as projection surface, With pinstrip model 449 Foot sections aluminium polished, Frame aluminium coated 878 Foot sections aluminium polished, Frame aluminium clear anodized 35 Version with castors 130 Pinstrip 449 For pinboard model 443/1 and whiteboard 443/3 17 Starter kit 451 For whiteboard model 443/3 comprising: 10 Magnets Ø 30 mm (1⅛") (2 colours), 4 dry-wipe board markers (4 colours), 1 Magnetic pen holder, 1 Magnetic board eraser, 10 Sheets erasing paper, 1 Bottle of board cleaning fluid

118 Confair Lectern, Server catering/interactive conference Body group/table top group Laminate Veneer variation 1 Veneer variation 2 Lectern 106/ ( 41¾"/45¼" 18⅛" 20⅛") 448/9 With modesty panel, coated Base and column aluminium coated Additional charge Base aluminium polished, column aluminium clear anodized Shelf 448 For lectern model 448/9, width 45 (17¾"), depth 35 (13¾") Server catering/interactive conference ( 42⅛" 18⅛" 23¼") 446/3 1 Box with drawer, 2 Open-top boxes Base and column aluminium coated Additional charge Base aluminium polished, column aluminium clear anodized Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer. 115

119 Confair System components: servers Body group Laminate Veneer variation 1 Veneer variation 2 Server frame 445/00 Height 96 (37¾") 510 Base and column aluminium coated 446/00 Height 107 (42⅛") Base and column aluminium coated 559 Additional charge Base aluminium polished, column aluminium clear anodized 63 Shelf 447/ x 45 (17¾" x 17¾") Shelf 447/ x 91 (17¾" x 35⅞") Box 447/ Open, 45 x 45 x 10 (17¾" x 17¾" x 3⅞") Box with drawer 447/ x 45 x 11 (17¾" x 17¾" x 4⅜") Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer. 116

120 Confair Accessories Four-wheeled trolley 441 for six mobile desks model 441/1 559 Four-wheeled trolley 443 for six pinboards model 443/1 or six whiteboards model 443/

121 440 range Confair folding table Design: Andreas Störiko Technical details Function Moveable, collapsible and linkable table range for flexible, dynamic use of conference and communication areas. Just one single step is required to open out or collapse up to three metre long, barrel-shaped or rectangular tables. The tables can also be linked to form conference systems using table-table connectors. Large-sized wheels allow the tables to be transported in buildings and come complete with a locking brake. As a result, minimum cost and effort is required to manage conference spaces. Ideal for multi-purpose conference interiors in high quality design. Alternatively as a wild card in combination with the Logon table range for conference spaces with a variety of partition options, or with Timetable for sophisticated training and seminar spaces. Frame Die-cast aluminium, bright chromeplated, polished foot section or coated in silver satin finish or black. Aluminium profile uprights and underframe, clear anodised or coated in the same colours as the foot sections. The bright chrome-plated foot sections are coated black. Upright optionally available bright chrome plated. Connecting bar und T-shaped joint coated like the uprights and underframes, with clear anodised uprights and underframes coated in silver satin finish. Connecting rod and T-shaped joint optionally bright chrome-plated. Lockable, black polyamide castors. Table top group 1 laminate Thickness 26 mm (1 ) Laminate according to Wilkhahn colour and surface finish samples with laminated beech lipping, natural oiled finish. Table top group 2 veneer Thickness 26 mm (1 ) Variation 1: Beech veneer according to Wilkhahn woodstain colour samples with laminated beech lipping or oak, or ash veneer according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Table top group 3 linoleum Table top thickness 27 mm (1⅛"). Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish. Accessories Single table portal Hinged cover in the same colour and material as the table top surface with brush strip for cable exit. Aperture with real wood lipping, as far as possible in the same colour as the table top. Hinge allows 180 opening angle. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞"). Linoleum on request. Further surfaces for the formats shown in the price list are available on request. Veneer types As a standard, veneers are slip-matched method onto the table top. The surfaces are sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer. Closed-pore: maple and beech veneer. Some specific growth features possible. Standards The Confair folding tables comply with ANSI / BIFMA X 5.5. When placing repeat orders, please indicate whether your table tops have slip -matched or book-matched veneer. Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile Frame versions Foot section Upright Connecting bar Top bearer and underframe 51 Bright chrome plated Black coated or bright chrome plated Black coated or bright chrome plated Coated black 52 Aluminium polished Clear anodized Coated, silver satin finish Clear anodized 53 Coated black Coated black Coated black Coated black 60 Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish 118

122 Confair Folding tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 440/00 With cross veneer, e.g. 110 x 260, H 73 (43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63") Aluminium coated foot sections, uprights and underframes, coated connecting bar Polished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar 82 Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar 172 Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar 384 Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar 588 Table-table-connectors model 613, metal (2 items) 100 Depth 90 Length (35⅜") 100 (39⅜") 105 (41⅜") 110 (43¼") 120 (47¼") 180 (70⅞") (78¾") (82⅝") (86⅝") (94½") (102⅜") (110¼") (118⅛") (70⅞") (78¾") (82⅝") (86⅝") (94½") (102⅜") (110¼") (118⅛") (70⅞") (78¾") (82⅝") (86⅝") (94½") (102⅜") (110¼") (118⅛") (70⅞") (78¾") (82⅝") (86⅝") (94½") (102⅜") (110¼") (118⅛") available not available 119

123 Confair Folding tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Barrel shape 440/2 With cross veneer, e.g. 90/110 x 260, H 73 (35⅜"/43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63") Aluminium coated foot sections, uprights and underframes, coated connecting bar Polished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar 82 Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar 172 Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar 384 Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar 588 Length Depth 90/110 (35⅜"/43¼") 90/120 (35⅜"/47¼") 180 (70⅞") (94½") (102⅜") (110¼") (70⅞") (94½") (102⅜") (110¼") (70⅞") (94½") (102⅜") (110¼") (70⅞") (94½") (102⅜") (110¼") 6032 available not available 120

124 Confair Folding tables Accessories +++UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛") UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜") UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜")

125 Confair folding table Built-in component sets For A1 and A3 mounting position Integrated Techni-Station Rotate set consisting of: Integrated techni-station on both sides 701/60 or 701/70 For B1 and B3 mounting position Integrated Techni-Station Rotate set consisting of: Integrated techni-station on both sides 701/60 or 701/70 Cable cover for techni-station Storage net Cable clip for the table legs (2) Cable clip for the table legs (2) Set price integrated techni-station on both sides 701/60 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station on both sides 701/60 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station on both sides 701/70 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Set price integrated techni-station on both sides 701/70 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Techni-station with opening mechanism at the touch of a button 74 Cable harness covered with black fabric sleeving 100 Techni-station with opening mechanism at the touch of a button 74 Cable harness covered with black fabric sleeving 100 All prices include section cut out of table Further details from page

126 Confair folding table Built-in component sets Integrated techni-station compact set consisting of: Cable outlet set consisting of: Integrated techni-station Compact 701/95 +++UEBERSETZUNG+++ Cable outlet 707/1 or 707/2 or 707/3 Cable clip for the table legs (2) Cable clip for the table legs (2) Set price integrated techni-station Compact 701/95 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port Set price cable outlet 707/1 65 Black plastic, Ø 80 mm (3⅛") Set price cable outlet 707/2 135 Aluminium coated black, Ø 85 mm (3⅜") Set price cable outlet 707/3 135 Aluminium clear anodized, Ø 85 mm (3⅜") Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving 100 All prices include section cut out of table Further details from page 246 For some cable outlets see accessories page

127 Confair folding table Built-in component sets For A1 and A3 mounting position Single table portal set consisting of: Single table portal Executive or Basic For M1 and M3 mounting position Single table portal set consisting of: Single table portal Executive or Basic Cable basket and mount for attaching socket strips Cable basket and mount for attaching socket strips Cable clip for the table legs (2) Cable clip for the table legs (2) Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 975 Table top group 2 Variation 1 and Table top group 3 Linoleum 975 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle vertical Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 369 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle vertical Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 1055 Table top group 2 Variation 1 and Table top group 3 Linoleum 1055 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle vertical Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 448 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle vertical Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving

128 Confair folding table Built-in component sets Socket strips for Set Single table portal: 708/1 Socket strip with 3 modules 45 3 x power supply modules (state local standard on orders).please order supply-/connecting cable separately 708/2 Socket strip with 3 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip with 4 modules 54 4 x power supply modules (state local standard on orders).please order supply-/connecting cable separately 708/5 Socket strip with 4 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛") 708/6 Socket strip with 5 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/8 Input cable 21 Length approx. 300 cm (118⅛") 708/9 Extension lead 13 Length approx. 100 cm (39⅜") 125

129 Confair folding table Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet 440/00 Set Mounting position A 1 A 3 B 1 B 3 M 1 M 3 Integrated techni-station on both sides 701/60 701/ Single table portal Executive Basic 2 2 Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 612/00 B1 B3 M1 M3 Set Mounting position B 1 B 3 M 1 M 3 Integrated techni-station on both sides 701/60 701/ Single table portal Executive Basic Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 1 from 210 cm table width 2 from 105 cm table depth 3 from 240 cm table width available not available 126

130

131 440 range Confair folding table Example configurations , 1 x 440/2, 90/120x , 1 x 440/00, 100x300 4 x 440/00, 100x , 6 x 440/00, 90x , 6 x 440/00, 90x

132 , 8 x 440/00, 90x210 24, 8 x 440/00, 90x

133 540 range Contas Design: wiege, Fritz Frenkler, Anette Ponholzer Technical details Function Lightweight, flexible conference table system that can be used in multi-purpose conference, seminar and training environments. It consists of individual tables that can be optionally stacked and folded. It has connecting leaves with quick and easy tool-free linkage thanks to a patented multiple connector plate, making a variety of configurations possible. Frame Legs in round steel tubing Ø 38 mm (1½"), bright chrome plated or coated. Adjustable glides (with disc profile on folding-leg table version) in black polyamide for soft floors (standard) and in black polyurethane for hard floors (please specify when ordering). Optionally, as stackable version (integral separator) with legs that are locked in place using a retaining clamp integrated into the table top. Leg retaining clamp in black polyamide. Multiple connector plate on tables and connecting leaves in die-cast zinc, bright chrome plated or coated. Multiple connector plate on the connecting leaves fitted with separator and retention mechanism. Tables fitted with table-to-table connectors. Core material of table top Particle board with straight, concealed lipping. Table top group 1 laminate Table top thickness 34 mm (1⅜") Laminate according to Wilkhahn colour and surface finish samples with beech lipping, natural oiled finish. Table top group 2 veneer Table top thickness 34 mm (1⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Table top group 3 linoleum Table top thickness 35 mm (1⅜") Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish. Further surfaces for the formats shown in the price list are available on request. Modesty panels Modesty panels with aluminium frame, coated with a silver satin finish, covered with transparent anthracite fabric. Grips in black polyamide. Standards The Contas tables comply with DIN EN 527. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Some specific growth features possible. When placing repeat orders, please indicate whether your tabletops have slip-matched or book-matched veneer. Frame versions Table frame and edge profiles 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish 130

134 Contas Fixed-leg and folding leg tables, table top depth 75 cm (29½") Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Square 540/11 75 x 75, H 73 (29½" x 29½", H 28¾") Frame aluminium coated Frame aluminium bright chrome plated As folding table Rectangular 540/15 75 x 150, H 73 (29½" x 59", H 28¾") Frame aluminium coated Frame aluminium bright chrome plated As folding table Rectangular 540/18 75 x 180, H 73 (29½" x 70⅞", H 28¾") Frame aluminium coated Frame aluminium bright chrome plated As folding table Contas Connecting leaf, panel depth 75 cm (29½") Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 541/15 75 x 150 (29½" x 59") Frame aluminium coated Additional charge Frame aluminium bright chrome plated All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for corresponding modesty panels to fit long edges and short edges. 131

135 Contas Fixed-leg and folding leg tables, table top depth 90 cm (35⅜") Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 540/25 90 x 150, H 73 (35⅜" x 59", H 28¾") Frame aluminium coated Frame aluminium bright chrome plated As folding table Rectangular 540/28 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Frame aluminium coated Frame aluminium bright chrome plated As folding table Contas Connecting leaf, panel depth 90 cm (35⅜") Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 541/25 90 x 150 (35⅜" x 59") Frame aluminium coated Additional charge Frame aluminium bright chrome plated All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for modesty panels to fit long edges and short edges. 132

136 Contas Accessories Four-wheeled trolley 546/75 to take five folding tables 540/15 (table depth 75 cm) 1296 Four-wheeled trolley 546/90 to take five folding tables 540/25 (table depth 90 cm) 1296 Modesty panel 549/02 Length 65 (25⅝"), H 40 (15¾"), for models 540/11 and short edges of models 540/15 and 540/ Modesty panel 549/03 Length 80 (31½"), H 40 (15¾"), for the front edges of the 540/25 and 540/28 models 427 Modesty panel 549/04 Length 140 (55⅛"), H 40 (15¾"), for models 540/15 and 540/ Modesty panel 549/05 Length 170 (66⅞"), H 40 (15¾"), for models 540/18 and 540/ Modesty panel 549/10 Length 148 (58¼"), H 40 (15¾"), for models 541/15 and 541/ Table-table connector 549/20 14 Table-connecting leaf connector 549/

137 544 range Concentra Design: wiege Technical details Function Tables to furnish offices and communication areas in different ways, as a combination or as stand-alone versions for project work, training and seminars, lounges, bistros, canteens and recreational areas etc. Frame Legs made of round steel tubing, 40 mm (15/8 ) in diameter, bright chrome plated or coated black, signal white or with a silver satin finish. Multipurpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chrome plated or coated. Attached underframe with underframe profiles made of tubular steel (35 x 25 mm/1⅜" x 1") and blackcoated corner angles made of diecast zinc. Core material of table top E1 plywood tabletop. Table top group 1 laminate Table top thickness 19 mm (¾") Laminate according to the Wilkhahn colour and surface samples with polypropylene plastic lipping. Table top group 2 veneer Table top thickness 19 mm (¾") Variant 1: Beech, oak and ash veneer based on Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variant 2: Maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible. 134

138 Table top group 5 direct coating Table top thickness 19 mm (¾") Melamine resin, directly coated in white or light grey with plastic lipping in the same colour as the surface made of ABS. Modesty panels Aluminium frame, black coated and covered with black fabric. Table-table-connectors (optional) 2 sheet steel connectors, black coated, 4 star-grip screws. Accessories Cable outlet Aluminium cable outlet 85 mm (3⅜ ) in diameter, coated black, or clear anodised (only for table top groups 1 and 2) or in plastic, 80 mm (3⅛ ) in diameter, in black (for table top groups 5, 1 and 2). When the tables are ordered drill holes in the table top applied and assembly only in the factory. Standards The Concentra tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards. Cable track profile Aluminium extruded profile, clear anodised, which is screwed underneath the table top and serves as a support for the cable track. Cable track Polypropylene cable track in black with sections for two different cables. Vertical cable riser Polyamide links in black, plastic foot section in black with a steel core. Adapter for cable track profile in black plastic. Length 80 cm (31½"). Frame versions Legs and capitals Under frames and corner angles 49 Coated signal white Coated black 51 Bright chrome plated Coated black 53 Coated black Coated black 60 Coated, silver satin finish Coated black 135

139 Concentra Tables Table top group Bonded surface Laminate Veneer variation 1 Veneer variation 2 Rectangular 544/00 e.g. 80 x 160, H 73 (31½" x 63", H 28¾") Frame coated Additional charge Frame bright chrome plated Depth Length 75 (29½") 80 (31½") 90 (35⅜") 100 (39⅜") 160 (63") 75 (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") 1526 available on request not available Round Ø 126, H 73 (49⅝", H 28¾") Frame coated Additional charge Frame bright chrome plated

140 Concentra Accessories Table-table connector 544 (2 units) 32 Modesty panel 545/ mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") 291 Modesty panel 545/ mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") 293 Modesty panel 545/ mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") 299 Modesty panel 545/ mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") 305 Modesty panel 545/ mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") 369 Modesty panel 545/ mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") 396 Modesty panel 545/ mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") 408 Modesty panel 545/ mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾")

141 Concentra Accessories +++UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛"), for table top groups 5, 1 and UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and Cable management horizontal 547 Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 92 Cable management vertical 548 Cable riser with adapter to connect with the cable track s profile, foot section with steel core 49 Power supply 138

142

143 600 range Conversa Design: wiege Technical details Function Tables for variable furnishing of offices and communication areas, as a combination or as stand-alone for project work, training and seminars, lounges, bistros, canteens and recreational areas etc. Frame Legs made of square steel tubing (40 x 40 mm/15/8" x 15/8"), bright chrome plated or coated black, signal white or with a silver satin finish. Multipurpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chrome plated or coated. Underframe attached with screws and with underframe profiles made of tubular steel (35 x 25 mm (1⅜" x 1") and black-coated corner angles made of die-cast zinc. Core material of table top E1 plywood tabletop. Table top group 1 laminate Table top thickness 19 mm (¾") Laminate based on the Wilkhahn colour and surface samples with ABS plastic lipping. Table top group 2 veneer Table top thickness 19 mm (¾") Variant 1: Beech, oak and ash veneer based on Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variant 2: Maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible. 140

144 Table top group 5 direct coating Table top thickness 19 mm (¾") Melamine resin, directly coated in white or light grey with plastic lipping in the same colour as the surface made of ABS. Modesty panels Aluminium frame, black coated and covered with black fabric. Table-table-connectors (optional) 2 sheet steel circlips, black coated, 4 star-grip screws. Accessories Cable outlet Aluminium cable outlet Aluminium cable outlet Aluminium cable outlet, 85 mm (3⅜ ) in diameter, coated black, or clear anodised (only for table top groups 1 and 2) or in plastic, 80 mm (3⅛ ) in diameter, in black (for table top groups 5, 1 and 2). When the tables are ordered drill holes in the table top applied and assembly only in the factory. Vertical cable riser Polyamide links in black, plastic foot section in black with a steel core. Adapter for cable track profile in black plastic. Length 80 cm (31½"). Standards The Conversa tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards. Cable track profile Aluminium extruded profile, clear anodised and screwed underneath the table top. Serves as a support for the cable track. Cable track Polypropylene cable track in black with sections for two different cables. Frame versions Legs and capitals Under frames and corner angles 49 Coated signal white Coated black 51 Bright chrome plated Coated black 53 Coated black Coated black 60 Coated, silver satin finish Coated black 141

145 Conversa Tables Table top group Bonded surface Laminate Veneer variation 1 Veneer variation 2 Rectangular 600/00 e.g. 80 x 160, H 73 (31½" x 63", H 28¾") Frame coated Additional charge Frame bright chrome plated Depth 75 Length (29½") 80 (31½") 90 (35⅜") 100 (39⅜") 160 (63") 75 (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") (29½") (31½") (35⅜") (59") (63") (70⅞") (78¾") 1526 available on request not available 142

146 Conversa Accessories Table-table connector 600 (2 units) 32 Modesty panel 601/ mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") 291 Modesty panel 601/ mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") 293 Modesty panel 601/ mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") 299 Modesty panel 601/ mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") 305 Modesty panel 601/ mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") 369 Modesty panel 601/ mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") 396 Modesty panel 601/ mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") 408 Modesty panel 601/ mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾")

147 Conversa Accessories +++UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛"), for table top groups 5, 1 and UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and Cable management horizontal 602 Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 92 Cable management vertical 603 Cable riser with adapter to connect with the cable track s profile, foot section with steel core 49 Power supply 144

148

149 610 range Timetable Design: Andreas Störiko Technical details Function A mobile table range with flip-top table tops and feet that turn in at the same time (not in Timetable Smart and Timetable Shift models). Destined for a variety of uses in multipurpose spaces and for interactive and dynamic conference types. Ideal when combined with the Confair and Logon table ranges for multifunctional use of highquality conference, presentation and meeting spaces. Timetable Smart is ideal for multipurpose areas and temporary workspaces. With a flip-top table top they nest compactly into one another. Timetable Smart comes with a locking mechanism and staggered storage is possible. Frame Timetable / Timetable Smart Foot section in die-cast aluminium, bright chrome plated or polished. Uprights and underframes in tubular steel, coated in black or with a silver satin finish. Uprights optionally available with a bright chromeplated finish (standard Timetable only). Die-cast zinc table top bearer, coated black, Timetable Smart with table top bearer in steel profile, draw rod in round steel tubing, coated black. Lockable, height adjustable, swivel castors with a black polyamide tyre are the standard version for carpeted floors; castors available with a polyurethane tyre for hard floors (please specify when ordering). Timetable Shift Standards The Timetable Shift tables comply with the DIN EN 527 standard. Frame Die-cast aluminium foot section, bright chrome plated, polished or silver satin finish or black coating. Aluminium profile upright, clear anodised or silver satin finish, or black coating; in bright chromeplated foot sections, coated in black. Upright optionally available bright chrome plated. Aluminium profile underframe, with integrated cable channel, depending on the foot section coated in silver satin finish or black. Steel profile table top bearer. Round steel tube draw rod, depending on foot section, black or silver satin finish coating. Lockable, height-adjustable polyamide swivel castors. Core material of table top Particle board with bullnose wood lipping with integral, impact-resilient profile in black elastomer. Timetable Smart with melamine resin directly coated in light or dark grey and with straight, colourmatched plastic lipping, or optionally with plywood with bullnose, wood edge with integrated impact-resilient profile made of black elastomer. Table top group 1 laminate Table top thickness 26 mm (1⅜") Laminate based on the Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish. Table top group 2 veneer Table top thickness 26 mm (1") Variation 1: Beech, oak and ash veneer from Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: maple, walnut or elm veneer, as well as Wilkhahn Mocca veneer from the Wilkhahn woodstain colour samples with wood lipping as far as possible in the same colour as the veneer. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer. Some specific growth features possible. 146

150 Table top group 3 linoleum Table top thickness 27 mm (11/8") Linoleum from the Wilkhahn woodstain colour samples, with laminated beech lipping, natural oiled finish. Table top group 5 direct coating (only for Timetable Smart) Table top thickness 25 mm (1 ) thick Melamine resin, directly coated in light or dark grey with plastic lipping in the same colour as the finish. Further finishes for the formats shown in the price list are available on request. Modesty panels Aluminium frame, coated with a silver satin finish, in anthracite or covered with black fabric. Black, polyamide handles. Table-table-connectors (optional) Metal table-table-connectors model 613: 2 lockable circlips made of black coated sheet steel with 4 star-grip screws and additionally and additionally for Timetable Smart: plastic table-table-connectors. Model 616: two rotatable circlips and two collets made of black through-dyed glass fibre-reinforced polyamide with washers. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile Timetable Smart, bonded surface straight edge Frame versions Foot section Upright and underframe Top bearer 51 Bright chrome plated Silver satin finish or black coating or bright cromium plated 52 Aluminium polished Coated silver satin finish or black (Timetable / Timetable Smart) Uprights clear anodized (Timetable Shift) 53 Coated black (Timetable Shift) 60 Coated, silver satin finish (Timetable Shift) Coated silver satin finish or black Coated silver satin finish or black Coated black Coated black (Timetable / Timetable Smart) Coated silver satin finish or black (Timetable Shift) Coated silver satin finish or black Coated silver satin finish or black 147

151 Timetable Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 610/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated Foot section bright chrome plated, upright and underframe aluminium coated 63 Foot section and upright bright chrome plated, underframe aluminium coated 107 Modesty panel aluminium coated (length 140 cm (55⅛")) 659 Modesty panel aluminium coated (length 150 cm (59")) 665 Modesty panel aluminium coated (length 160 cm (63")) 673 Modesty panel aluminium coated (length 180 cm (70⅞")) 685 Table-table-connectors model 613, metal (2 items) 100 Depth 60 Length (23⅝") 70 (27½") 75 (29½") 80 (31½") 140 (55⅛") (59") (63") (70⅞") (55⅛") (59") (63") (70⅞") (55⅛") (59") (63") (70⅞") (55⅛") (59") (63") (70⅞") available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 148

152 Timetable Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Elliptical 610/10 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated Foot section bright chrome plated, upright and underframe aluminium coated 63 Foot section and upright bright chrome plated, underframe aluminium coated 107 available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 149

153 Timetable Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /15 e.g. 80 x 120/161, H 73 (31½" x 47¼"/63⅜", H 28¾"), Stackable The swivel release can be located on the inner or the outer radius. Please specify when ordering. Foot sections aluminium polished, upright and underframe aluminium coated Foot section bright chrome plated, upright and underframe aluminium coated 63 Foot section and upright bright chrome plated, underframe aluminium coated 107 Table-table-connectors model 613, metal (2 items) 100 Depth 70 Length (27½") 80 (31½") 120/156 47¼"/61⅜" /161 47¼"/63⅜" /156 47¼"/61⅜" /161 47¼"/63⅜" /156 47¼"/61⅜" /161 47¼"/63⅜" /156 47¼"/61⅜" /161 47¼"/63⅜" 2248 available not available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 150

154 Timetable Smart Tables Table top group Bonded surface Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 612/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated Foot section bright chrome plated, upright and underframe aluminium coated 63 Table-table-connectors model 613, metal (2 items) 100 Table-table-connectors model 616, plastic (2 items) 64 Depth 60 Length (23⅝") 70 (27½") 75 (29½") 120 (47¼") (55⅛") (59") (47¼") (55⅛") (59") (47¼") (55⅛") (59") (47¼") (55⅛") (59") (47¼") (55⅛") (59") available not available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 151

155 Timetable Shift Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 614/00 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated Polished aluminium foot section, uprights clear anodized, underframes coated 82 Bright, chrome plated aluminium foot section, uprights and underframes coated 172 Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated 384 Modesty panel aluminium coated (length 150 cm (59")) 665 Modesty panel aluminium coated (length 160 cm (63")) 673 Modesty panel aluminium coated (length 180 cm (70⅞")) 685 Modesty panel aluminium coated (length 200 cm (78¾")) 695 Modesty panel aluminium coated (length 210 cm (82⅝")) 834 Table-table-connectors model 613, metal (2 items) 100 Depth 80 Length (31½") 90 (35⅜") 100 (39⅜") 105 (41⅜") 150 (59") (63") (70⅞") (78¾") (82⅝") (59") (63") (70⅞") (78¾") (82⅝") (59") (63") (70⅞") (78¾") (82⅝") (59") (63") (70⅞") (78¾") (82⅝") available not available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 152

156 Timetable Shift Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Barrel shape 614/42 e.g. 80/100 x 180, H 73 (31¼"/39⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated Polished aluminium foot section, uprights clear anodized, underframes coated 82 Bright, chrome plated aluminium foot section, uprights and underframes coated 172 Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated 384 Length Depth 80/100 (31½"/39⅜") 80/105 (31½"/41⅜") 180 (70⅞") (82⅝") (70⅞") (82⅝") (70⅞") (82⅝") (70⅞") (82⅝") 3021 available not available All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). 153

157 Timetable Built-in component sets Integrated Techni-Station Rotate set consisting of: Integrated techni-station compact set 701/95 consisting of: Integrated techni-station on both sides 701/60 or 701/70 Integrated techni-station Compact 701/95 Cable cover for techni-station Cable holder under the table top with hook and loop fastener Cable holder under the table top with hook and loop fastener Cable clip for the table legs (2) Cable clip for the table legs (2) Set price integrated techni-station on both sides 701/60 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station Compact 701/95 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port Set price integrated techni-station on both sides 701/70 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Techni-station with opening mechanism at the touch of a button 74 Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving 100 All prices include section cut out of table Further details from page

158 Timetable Built-in component sets Cable outlet set consisting of: +++UEBERSETZUNG+++ Cable outlet 707/1 or 707/2 or 707/3 Cable holder under the table top with hook and loop fastener Cable clip for the table legs (2) Set price cable outlet 707/1 149 Black plastic, Ø 80 mm (3⅛") Set price cable outlet 707/2 219 Aluminium coated black, Ø 85 mm (3⅜") Set price cable outlet 707/3 219 Aluminium clear anodized, Ø 85 mm (3⅜") Cable harness covered with black fabric sleeving 100 All prices include section cut out of table Further details from page 246 For some cable outlets see accessories page

159 Timetable Built-in component sets Single table portal set Executive or Basic: Single table portal Executive or Basic For mod. 614/00 insert in position M2 Single table portal set Executive or Basic: Single table portal Executive or Basic Cable channel to integrate the socket strip Strain anchor 614/8 Cable holder under the table top with hook and loop fastener Cable holder 614/9 Cable clip for the table legs (2) Cable clip for the table legs (2) Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 1101 Table top group 2 Variation 1 and Table top group 3 Linoleum 1101 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 494 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 744 Table top group 2 Variation 1 and Table top group 3 Linoleum 744 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle horizontal in the underframe Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 494 Incl. fastening material for socket strip Please order socket strip separately. Possible attachment angle horizontal in the underframe Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving 100 All prices include section cut out of table Further details from page

160 Timetable Built-in component sets Socket strips for Set Einbauklappe: 708/1 Socket strip with 3 modules 45 3 x power supply modules (state local standard on orders).please order supply-/connecting cable separately 708/2 Socket strip with 3 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip with 4 modules 54 4 x power supply modules (state local standard on orders).please order supply-/connecting cable separately 708/5 Socket strip with 4 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛") 708/6 Socket strip with 5 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/8 Input cable 21 Length approx. 300 cm (118⅛") 708/9 Extension lead 13 Length approx. 100 cm (39⅜") 157

161 Timetable Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet Timetable 610/00 612/00 A1 A2 A3 610/10 A1 A2 A3 Set Mounting position A 1 A 2 A 3 A 1 A 2 A 3 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic 1 Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 1 from 75 cm table width available not available A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M

162 Timetable Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet Timetable Timetable Smart 610/15 612/00 A1 A2 A3 Set Mounting position A 1 A 2 A 3 A 1 A 2 A 3 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 available not available A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M

163 Timetable Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet Timetable Shift 614/00 614/42 A1 A2 A3 M2 M2 Set Mounting position A 1 A 2 A 3 M 2 M 2 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic 2 Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 2 from 100 cm table depth available not available A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M

164 Timetable Accessories +++UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛") UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜") UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜")

165 610 range Timetable Example configurations , Timetable 12 x 610/15, 120/161x , Timetable 6 x 610/15, 120/161x80 4 x 610/00, 160x80 162

166 , Timetable 8 x 610/15, 120/161 x 80 3 x 610/00, 160x80 1 x 610/00, 180x90, Ellipsenform 163

167 610 range Timetable Example configurations (28), Timetable Shift 7 (8) x 614/00, 210x (22), Timetable Shift 6 x 614/00, 210x , Timetable Smart 10 x 612/51, 150x60 164

168

169 620 range Logon Design: Andreas Störiko Technical details Function Stand-alone tables for use in offices, and system components for permanently linked table configurations in conference rooms. Ideal for combining with Confair folding tables for versatile, partitionable conference rooms. Frame Foot section in die-cast aluminium, bright chrome plated, polished or coated black or silver, satin finish. Aluminium profile uprights, clear anodized or coated; coated black for bright chrome plated foot section. Die-cast aluminium table top bearer coated in either silver satin finish or black, depending on foot section version. Aluminium profile underframe coated in silver satin finish or black, depending on foot section version. Uprights optionally available bright chrome plated. Centre underframe for table depths cm (29½" 35⅜"); two separate underframes for table depths cm (41⅜" 51⅛"). Adjustable glides in black polyamide. Lockable castors in black polyamide. Core material of table top Particle board with bullnose double, wood lipping and impact-resilient profile in black elastomer. MDF panel only in combination with veneered surface finish with colour-matched, chamfered wood lipping (with a radiused edge). For system elements: central joining edge straight without any profile. Table top group 1 laminate Thickness 26 mm (1") Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish. Table top group 2 veneer Table top thickness 26 mm (1") Variation 1: Beech, oak or ash veneer (exception: ash, natural finish, is not available with a chamfered edge version) according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception no natural maple in chamfered-edge versions), walnut or elm veneer as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. (Maple, natural finish, is not available with a chamfered edge version). Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Table top group 3 linoleum: Thickness 27 mm (1⅛") Linoleum according to Wilkhahn linoleum colour samples with laminated beech lipping, natural oiled finish. Further surfaces for the formats shown in the price list are available on request. Modesty panels Fluted extruded aluminium profile, clear anodized or coated black. Screw connectors to table top, clear anodized. Modesty panels may also be retro-fitted. Price on request. Single table portal Portal with brushed profile the same colour and material as the table top on both sides. Aperture with real wood lipping, as far as possible in the same colour as the table top. Hinge can be opened to 180. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞") Linoleum on request. Standards Logon tables conform to the Standard ANSI / BIFMA X 5.5. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile Alternatively: Chamfer edge profile on veneer version Frame versions Foot section Upright Top bearer and underframe 51 Bright chrome plated Black coated or bright chrome Coated black plated 52 Aluminium polished Clear anodized Coated, silver satin finish 53 Coated black Coated black Coated black 60 Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish 166

170 Logon Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 620/00 e.g. 120 x 240, H 73 (47¼" x 94½", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Modesty panel aluminium coated (length 150 cm (59")) 399 Modesty panel aluminium clear anodized (length 150 cm (59")) 422 Modesty panel aluminium coated (length 180 cm (70⅞")) 461 Modesty panel aluminium clear anodized (length 180 cm (70⅞")) 486 Modesty panel aluminium coated (length 240 cm (94½")) 625 Modesty panel aluminium clear anodized (length 240 cm (94½")) 664 With castors (available up to a max. length of 210 cm (78¾")) 152 Depth 75 Length (29½") 80 (31½") 90 (35⅜") 100 (39⅜") 110 (43¼") 120 (47¼") 130 (51⅛") 150 (59") (63") (70⅞") (78¾") (86⅝") (90½") (94½") (118⅛") (59") (63") (70⅞") (78¾") (86⅝") (90½") (94½") (118⅛") (59") (63") (70⅞") (78¾") (86⅝") (90½") (94½") (118⅛") (59") (63") (70⅞") (78¾") (86⅝") (90½") (94½") (118⅛") available not available 167

171 Logon Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Barrel shape 627/42 e.g. 100/120 x 260, H 73 (39⅜"/47¼" x 102⅜", H 28¾"), Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Depth 100/120 Length (39⅜"/47¼") 100/130 (39⅜"/51⅛") 240 (94½") (102⅜") (118⅛") (94½") (102⅜") (118⅛") (94½") (102⅜") (118⅛") (94½") (102⅜") (118⅛") 2972 available not available 168

172 Logon Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Round 621/35 e.g. Ø 160, H 73 (Ø 63", H 28¾") Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer Foot section aluminium polished, upright aluminium, clear anodized 123 Foot section aluminium bright chrome plated, upright aluminium, coated black 258 Foot section and upright aluminium bright chrome plated 576 Diameter 150 (59") (63") (59") (63") (59") (63") (59") (63") 4765 available 169

173 Logon Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Round 622/45 e.g. Ø 180, H 73 (Ø 70⅞", H 28¾") Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer Foot section aluminium polished, upright aluminium, clear anodized 164 Foot section aluminium bright chrome plated, upright aluminium, coated black 344 Foot section and upright aluminium bright chrome plated 768 Diameter 180 (70⅞") (86⅝") (70⅞") (86⅝") (70⅞") (86⅝") (70⅞") (86⅝") 5849 available 170

174 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rounded short edge 620/11 Starting element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Extendable with the 620/21, 620/31, 620/41, 624/51 models Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Depth 80 Length (31½") 90 (35⅜") 100 (39⅜") 110 (43¼") 120 (47¼") 130 (51⅛") 160 (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") available 171

175 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rounded short edge 620/21 Finishing element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 Depth 80 Length (31½") 90 (35⅜") 100 (39⅜") 110 (43¼") 120 (47¼") 130 (51⅛") 160 (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") (63") (70⅞") (78¾") (86⅝") (94½") available 172

176 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 620/31 Intermediate element e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 Depth 80 Length (31½") 90 (35⅜") 100 (39⅜") 110 (43¼") 120 (47¼") 130 (51⅛") 160 (63") (70⅞") (78¾") (86⅝") (63") (70⅞") (78¾") (86⅝") (63") (70⅞") (78¾") (86⅝") (63") (70⅞") (78¾") (86⅝") available 173

177 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Corner element /91 Intermediate element 90 x 10 x R 227 x 10 x 90 x 30, H 73 (35⅜" x 3⅞" x R 89⅜" x 3⅞" x 35⅜" x 11¾", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 Modesty panel aluminium coated 162 Modesty panel aluminium clear anodized

178 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-barrel shape 627/51 Starting element e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾") Extendable with the 627/61 and 620/31 models Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Depth 100/130 Length (39⅜"/51⅛") 160 (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") 2761 available 175

179 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-barrel shape 627/61 Finishing element e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 Depth 100/130 Length (39⅜"/51⅛") 160 (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") 2383 available 176

180 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-oval 628/51 Starting element e.g. 120 x 180, H 73 (47¼" x 70⅞", H 28¾") Extendable with the 628/61 and 620/31 models Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Depth 120 Length (47¼") 160 (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") 2761 available 177

181 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-oval 628/61 Finishing element e.g. 120 x 180, H 73 (47¼" x 70⅞", H 28¾") Foot section and upright aluminium coated M1 Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 Depth 120 Length (47¼") 160 (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") (63") (70⅞") (78¾") 2383 available 178

182 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-circle 622/11 Starting element 180 x 90, H 73 (70⅞" x 35⅜", H 28¾") Extendable with the 622/21 and 622/31 models Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 123 Foot section aluminium bright chrome plated, upright aluminium, coated black 258 Foot section and upright aluminium bright chrome plated 576 available Semi-circle 622/21 Finishing element 180 x 90, H 73 (70⅞" x 35⅜", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 available 179

183 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 622/31 Intermediate element e.g. 180 x 160, H 73 (70⅞" x 63", H 28¾") Foot section and upright aluminium coated Foot section aluminium polished, upright aluminium, clear anodized 82 Foot section aluminium bright chrome plated, upright aluminium, coated black 172 Foot section and upright aluminium bright chrome plated 384 Depth 180 Length (70⅞") 80 (31½") (63") (86⅝") (31½") (63") (86⅝") (31½") (63") (86⅝") (31½") (63") (86⅝") 3403 available 180

184 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /41 Intermediate element 90 x 155, Ri 210/Ra 300, H 73 (as an extension for table configuration in Ø 600 cm) Foot section and upright aluminium coated, frame with welded rectangular underframe Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 available Ri Inside radius Ra Outside radius Arc-shaped module /41 Intermediate element 90 x 153, Ri 110/Ra 200, H 73 (as an extension for table configuration in Ø 400 cm) Foot section and upright aluminium coated, frame with welded rectangular underframe Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 available Ri Inside radius Ra Outside radius Arc-shaped module /41 Intermediate element 90 x 191, Ri 45/Ra 135, H 73 (as an extension for table configuration in Ø 270 cm) Foot section and upright aluminium coated, frame with welded rectangular underframe Foot section aluminium polished, upright aluminium, clear anodized 41 Foot section aluminium bright chrome plated, upright aluminium, coated black 86 Foot section and upright aluminium bright chrome plated 192 available Ri Inside radius Ra Outside radius 181

185 Logon Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 622/00 V shaped configuration for video conference 310 x 364, H 73 / 150 x 384, H 73 (122" x 143¼", H 28¾" / 59" x 151⅛", H 28¾") Table configuration for 10 12, Comprising 3 table elements, Veneer direction: cross veneer (Optionally with modesty panels and modules with power supply on request) Foot section and upright aluminium coated, foot plate coated black, central column coated Foot section aluminium bright chrome plated, upright aluminium, coated black, foot plate coated black, central column bright chrome plated

186 Logon Accessories +++UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛") UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜") UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜")

187 Logon Built-in component sets Integrated techni-station basic set consisting of: Integrated Techni-Station Rotate set consisting of: Integrated techni-station Basic 701/00 or 701/10 Integrated techni-station on both sides 701/60 or 701/70 Cable cover for techni-station Cable cover for techni-station Cable holder under the table top with hook and loop fastener Cable holder under the table top with hook and loop fastener Cable clip for the table legs (2) Cable clip for the table legs (2) Set price integrated techni-station Basic 701/00 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station on both sides 701/60 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station Basic 701/10 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Set price integrated techni-station on both sides 701/70 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Techni-station with mechanism that opens by pressing the top 74 Cable harness covered with black fabric sleeving 100 Techni-station with opening mechanism at the touch of a button 74 Cable harness covered with black fabric sleeving /2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish /2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish /1 CPU holder for assembly between the uprights /1 CPU holder for assembly between the uprights 358 All prices include section cut out of table Further details from page

188 Logon Built-in component sets Integrated techni-station move set or Compact consisting of: Cable outlet set consisting of: Integrated techni-station Move 701/85 or Compact 701/95 +++UEBERSETZUNG+++ Cable outlet 707/1 or 707/2 or 707/3 Cable holder under the table top with hook and loop fastener Cable holder under the table top with hook and loop fastener Cable clip for the table legs (2) Cable clip for the table legs (2) Set price integrated techni-station Move 701/85 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Set price integrated techni-station Compact 701/95 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port Set price cable outlet 707/1 149 Black plastic, Ø 80 mm (3⅛") Set price cable outlet 707/2 219 Aluminium coated black, Ø 85 mm (3⅜") Set price cable outlet 707/3 219 Aluminium clear anodized, Ø 85 mm (3⅜") Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving /2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish /2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish /1 CPU holder for assembly between the uprights /1 CPU holder for assembly between the uprights 358 All prices include section cut out of table Further details from page 246 For some cable outlets see accessories page

189 Logon Built-in component sets Single table portal set consisting of: Socket strips for Set Einbauklappe: Single table portal Executive or Basic 708/1 Socket strip with 3 modules 45 3 x power supply modules (state local standard on orders).please order supply-/connecting cable separately Cable channel to integrate the socket strip Cable holder under the table top with hook and loop fastener 708/2 Socket strip with 3 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") Cable clip for the table legs (2) 708/4 Socket strip with 4 modules 54 4 x power supply modules (state local standard on orders).please order supply-/connecting cable separately Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 1101 Table top group 2 Variation 1 and Table top group 3 Linoleum 1101 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 494 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Cable harness covered with black fabric sleeving /5 Socket strip with 4 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛") 708/6 Socket strip with 5 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 620/2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish /8 Input cable 21 Length approx. 300 cm (118⅛") 620/1 CPU holder for assembly between the uprights /9 Extension lead 13 Length approx. 100 cm (39⅜") All prices include section cut out of table Further details from page

190

191 Logon Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet Table depth 90 cm Table depth > 90 cm 620/00 620/00 627/42 M1 M3 620/11 620/11 627/51 A1 A3 M1 M3 620/31 620/31 627/61 620/21 620/21 628/51 A1 A3 M1 M3 620/41 628/61 M1 M1 M3 Set Mounting position A 1 A 2 A 3 1 A 1 A 2 A 3 1 M 1 M 2 M 3 1 Integrated techni-station Basic 701/00 701/ Integrated techni-station on both sides 701/60 701/ Single table portal Executive Basic Integrated techni-station Move 701/85 Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 1 from 200 cm table width 2 from 120 cm table depth available not available A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M

192 Logon Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet 621/35 622/45 Set Mounting position A 1 A 3 1 M 1 M 2 M 3 1 B 1 B 3 1 Integrated techni-station Basic 701/00 701/10 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic Integrated techni-station Move 701/85 Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 1 from 200 cm diameter available not available 189

193 620 range Logon Example configurations , 3 x 620/11, 240x90 3 x 620/21, 240x90 3 x 620/31, 160x90 6 x 620/11, 153x90, , 4 x 620/41, 191x90,

194 , 4 x 620/31, 220x90 4 x 624/91, 90x10xR227x10x90x30, 90 20, 1 x 622/11, 180x90 1 x 622/21, 180x90 2 x 622/31, 220x (283⅜") , 1 x 620/11, 220x90 1 x 620/21, 220x90 2 x 620/31, 220x90 4 x 620/41, 191x90, (51⅛") 18, 1 x 627/51, 100/130x180 1 x 627/61, 100/130x180 2 x 620/31, 130x

195 632 range Technical details Function Centre pedestal tables for meetings, cafeterias or dining rooms at home. Frame models 632/00, diameter 90, 110, 125 cm Steel disc base (Ø 610 mm) with sheet steel cover, coated in white or black, or with optional ultrapolished stainless steel cover. Steel column to match the foot section, coated in black or white, with stainless steel ultra-polished foot section, table column is bright chromeplated. Table top bearer (cross brace) in black. Frame model 632/00, 150 cm in diameter Steel disc base (Ø 735 mm) with sheet steel cover, coated in white or black, or with optional ultrapolished stainless steel cover. Steel column to match the foot section, coated in black or white, with stainless steel ultra-polished foot section, table column is bright chromeplated. Connecting flange in steel and coated in black. Core material of table top Particle board with straight, colour-matched wood lipping. Table top group 1 laminate Table top thickness 26 mm (1") Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish. Table top group 2 veneer Table top thickness 26 mm (1") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Further surfaces for the formats shown in the price list are available on request. Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Frame versions Tables Disc base with cover Table column Table top bearer 49 Coated white Coated white Coated black 53 Coated black Coated black Coated black 71 Polished stainless steel coated or bright chrome Coated black plated 192

196 632 range Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Round 632/00 Ø 90, H 73 (Ø 35⅜", H 28¾") Frame coated Disc base with ultra-polished, stainless steel cover Bright chrome plated table column Round 632/00 Ø 110, H 73 (Ø 43¼", H 28¾") Frame coated Disc base with ultra-polished, stainless steel cover Bright chrome plated table column Round 632/00 Ø 125, H 73 (Ø 49¼", H 28¾") Frame coated Disc base with ultra-polished, stainless steel cover Bright chrome plated table column Round 632/00 Ø 150, H 73 (Ø 59", H 28¾") Frame coated Disc base with ultra-polished, stainless steel cover Bright chrome plated table column

197 640 range Palette Design: Karlheinz Rubner Technical details Function Flexible, impressive-looking table system with options ranging from the standalone table to sophisticated conference table systems for office, seminar and conference rooms. Table top formats, lipping and table leg shapes can be adapted to suit different design concepts. Ideal for customised conference table systems and integrating stateof-the-art multi-media equipment. Standardised system panels for table configurations: All standardised system panels can be connected with one another. Panels for specific table systems can only be combined with each other, i.e. and not with standardised system panels. Frame Legs in square aluminium profile 100 x 100 mm (3⅞ x 3⅞"), clear anodised or coated, with four bolts each and connected with a bayonet lock integrated into the table top. Optionally with legs in round aluminium tubing ø 65 mm (2½") also possible here with a bright chrome-plated finish. Base elements with black polyamide glides. Core material of table top Particle board with straight, concealed lipping. On request, lipping also with bullnose profile (sides of tables that are to be linked are only available with a straight edge). Integrated connecting mechanism for attaching the legs. Table top group 1 laminate Thickness 39 mm (1½") Laminate based on Wilkhahn colour and surface finish samples with laminated beech lipping, natural oiled finish Table top group 2 veneer Table top thickness 39 mm (1½") Variation 1: Beech veneer based on Wilkhahn woodstain colour samples with laminated beech lipping, as far as possible in the same colour as the veneer, or oak or ash veneer based on Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer and Wilkhahn Mocca veneer based on the Wilkhahn woodstain colour samples with lipping, as far as possiblew in the same colour as the veneer. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer. Bottom of table in beech veneer, mostly colour matched with the veneer on the table top. Some specific growth features possible. Table top group 3 linoleum Table top thickness 40 mm (15/8"). Linoleum from the Wilkhahn woodstain colour samples, with laminated beech lipping, natural oiled finish. Further finishes for the formats shown in the price list are available on request. Standards The Palette tables comply with the ANSI / BIFMA X 5.5 standard. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Adjoining table systems can be matched up to a maximum length of 270 cm (106¼ ). The prices for table tops and frame legs are listed separately. Please state the number of frame legs required in the order. Edge profiles Frame legs for 73 cm table height Model 641 Model 643 Square Round Straight Please note: check in advance to see whether the edge profiles are available for the relevant table shapes and configurations. for profiles that are not straight on request. Only tables with straight edges can be linked. Frame versions Table frame and edge profiles 51 bright chrome plated aluminium 53 Coated black 60 Coated, silver satin finish 62 Clear anodized 194

198 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 640/00 Table top e.g. 80 x 160 (31½" x 63") with 4 connecting mechanisms for fixing frame legs (square table systems cannot be used as corner elements) aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Length Depth 70 (27½") 75 (29½") 80 (31½") 90 (35⅜") 100 (39⅜") 105 (41⅜") 120 (47¼") 130 (51⅛") 140 (55⅛") 150 (59") 90 (35⅜") (55⅛") (59") (63") (70⅞") (78¾") (82⅝") (35⅜") (55⅛") (59") (63") (70⅞") (78¾") (82⅝") (35⅜") (55⅛") (59") (63") (70⅞") (78¾") (82⅝") (35⅜") (55⅛") (59") (63") (70⅞") (78¾") (82⅝") not available 195

199 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Corner element /10 Extension leaf e.g. 80 x 80 (31½" x 31½") with four connecting mechanisms for fixing frame legs to extend model 640/ aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") 90 (35⅜") 80 (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") 1402 not available 196

200 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 165, Ri 220/Ra 300 (31½" x 65") with four connecting mechanisms for fixing frame legs to extend model 640/ aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 220/Ra 300) 90 (35⅜") (Ri 220/Ra 310) 165 (65") (66⅞") (65") (66⅞") (65") (66⅞") (65") (66⅞") 1605 not available Ri Inside radius Ra Outside radius 197

201 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 162, Ri 120/Ra 200 (31½" x 63¾") with four connecting mechanisms for fixing frame legs to extend model 640/ aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 120/Ra 200) 90 (35⅜") (Ri 120/Ra 210) 162 (63¾") (66⅞") (63¾") (66⅞") (63¾") (66⅞") (63¾") (66⅞") 1605 not available Ri Inside radius Ra Outside radius 198

202 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 184, Ri 45/Ra 125 (31½" x 72½") with four connecting mechanisms for fixing frame legs to extend model 640/ aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 45/Ra 125) 90 (35⅜") (Ri 45/Ra 135) 184 (72½") (78") (72½") (78") (72½") (78") (72½") (78") 1764 not available Ri Inside radius Ra Outside radius 199

203 Palette Tables Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-oval 640/71 Starter tabletop panel 120 x 150 (47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 640/81 and 640/00 models in 120 cm depth aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Semi-oval 640/81 End tabletop panel 120 x 150 (47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 640/81 and 640/00 models in 120 cm depth aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod

204 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-barrel shape 644/51 Starter tabletop panel 90/120 x 150 (35⅜"/47¼" x 59") with 4 connecting mechanisms for fixing frame legs Extendable with the 644/61 and 644/31 models aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Semi-barrel shape 644/61 End tabletop panel 90/120 x 150 (35⅜"/47¼" x 59") with 4 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod

205 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 644/71 Extension leaf e.g. 120 x 90 (35⅜" x 47¼")) with 4 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 120 Length (47¼") 80 (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛")

206 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-circle 644/11 Starter tabletop panel e.g. 160 x 80 (63 x 31½") with 3 connecting mechanisms for fixing frame legs Extendable with the 644/21 and 644/31 models aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Length Depth 160 (63") 180 (70⅞") 80 (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") 1739 not available 203

207 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-circle 644/21 End tabletop panel e.g. 160 x 80 (63 x 31½") with 3 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Length Depth 160 (63") 180 (70⅞") 80 (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") (31½") (35⅜") 1739 not available 204

208 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 644/31 Extension leaf e.g. 160 x 90 (63 x 35⅜") with 4 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Length Depth 160 (63") 180 (70⅞") 80 (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛")

209 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Semi-barrel shape 645/51 Starter tabletop panel 100/150 x 160 with 5 connecting mechanisms for fixing frame legs Extendable with the 645/61 and 645/31 models aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Semi-barrel shape 645/61 End tabletop panel 100/150 x 160 with 5 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod

210 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Rectangular 645/71 Extension leaf e.g. 150 x 90 (59 x 35⅜") with 6 connecting mechanisms for fixing frame legs aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 150 Length (59") 80 (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛") (31½") (35⅜") (39⅜") (47¼") (51⅛")

211 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 155, Ri 220/Ra 300 (31½" x 61") with 4 connecting mechanisms for fixing frame legs for Ø 600 cm table configurations aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 220/Ra 300) 90 (35⅜") (Ri 220/Ra 310) 155 (61") (63") (61") (63") (61") (63") (75¼") (63") 1605 not available Ri Inside radius Ra Outside radius 208

212 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 153, Ri 120/Ra 200 (31½" x 60¼") with 4 connecting mechanisms for fixing frame legs for Ø 400 cm table configurations aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 120/Ra 200) 90 (35⅜") (Ri 120/Ra 210) 153 (60¼") (63⅜") (60¼") (63⅜") (60¼") (63⅜") (60¼") (63⅜") 1605 not available Ri Inside radius Ra Outside radius 209

213 Palette Table configurations Table top group Laminate Veneer variation 1 Veneer variation 2 Linoleum Arc-shaped module /11 Extension leaf e.g. 80 x 177, Ri 45/Ra 125 (31½" x 69⅝") with 4 connecting mechanisms for fixing frame legs for Ø 250 cm table configurations aluminium coated frame leg, Mod. 641 or aluminium anodised frame leg, Mod. 641 or round, chrome plated aluminium frame leg, Mod Depth 80 Length (31½") (Ri 45/Ra 125) 90 (35⅜") (Ri 45/Ra 135) 177 (67⅜") (75¼") (67⅜") (75¼") (67⅜") (75¼") (67⅜") (75¼") 1764 not available Ri Inside radius Ra Outside radius 210

214 Palette Accessories Four-wheeled trolley 646/01 for five table tops 90 x 90 (35⅜" x 35⅜") and/or 90 x 180 (35⅜" x 70⅞") and fourteen square table legs 10 x 10 (3⅞" x 3⅞") UEBERSETZUNG+++ Cable outlet 707/1 Black plastic, Ø 80 mm (3⅛") UEBERSETZUNG+++ Cable outlet 707/2 Aluminium coated black, Ø 85 mm (3⅜") UEBERSETZUNG+++ Cable outlet 707/3 Aluminium clear anodized, Ø 85 mm (3⅜")

215 Palette Built-in component sets Integrated techni-station basic set consisting of: Integrated Techni-Station Rotate set consisting of: Integrated techni-station Basic 701/00 or 701/10 Integrated techni-station on both sides 701/60 or 701/70 Cable cover for techni-station Cable cover for techni-station Cable holder under the table top with hook and loop fastener Cable holder under the table top with hook and loop fastener Set price integrated techni-station Basic 701/00 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station on both sides 701/60 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Set price integrated techni-station Basic 701/10 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Set price integrated techni-station on both sides 701/70 with 4 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Techni-station with mechanism that opens by pressing the top 74 Cable harness covered with black fabric sleeving 100 Techni-station with opening mechanism at the touch of a button 74 Cable harness covered with black fabric sleeving 100 Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) 120 Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) 120 All prices include section cut out of table Further details from page

216 Palette Built-in component sets Integrated techni-station compact set consisting of: Cable outlet set consisting of: Integrated techni-station Compact +++UEBERSETZUNG+++ Cable outlet 707/1 or 707/2 or 707/3 Cable holder under the table top with hook and loop fastener Cable holder under the table top with hook and loop fastener Set price integrated techni-station Compact 701/95 with 3 modules: x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port Set price cable outlet 707/1 144 Black plastic, Ø 80 mm (3⅛") Set price cable outlet707/2 214 Aluminium coated black, Ø 85 mm (3⅜") Set price cable outlet 707/3 214 Aluminium clear anodized, Ø 85 mm (3⅜") Cable harness covered with black fabric sleeving 100 Cable harness covered with black fabric sleeving 100 Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) 120 Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) 120 All prices include section cut out of table Further details from page 246 For some cable outlets see accessories page

217 Palette Built-in component sets Single table portal set consisting of: Socket strips for Set Einbauklappe: Single table portal Executive or Basic 708/1 Socket strip with 3 modules 45 3 x power supply modules (state local standard on orders).please order supply-/connecting cable separately Cable channel to integrate the socket strip Cable holder under the table top with hook and loop fastener 708/2 Socket strip with 3 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip with 4 modules 54 4 x power supply modules (state local standard on orders).please order supply-/connecting cable separately Set price single table portal Executive 150 x 300 mm (59" x 118⅛") Table top group 1 Laminate 1096 Table top group 2 Variation 1 and Table top group 3 Linoleum 1096 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Set price single table portal Basic 120 x 300 mm (47¼" x 118⅛") 488 Incl. fastening material for socket strip Please order socket strip separately. Attachable at 15 or vertically (please stated angle when ordering) Cable harness covered with black fabric sleeving /5 Socket strip with 4 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛") 708/6 Socket strip with 5 modules x power supply modules (state local standard on orders).please order supply-/connecting cable separately 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") Cable outlet in table leg for vertical cable management (Additional charge for frame leg models 641 or 643) /8 Input cable 21 Length approx. 300 cm (118⅛") 708/9 Extension lead 13 Length approx. 100 cm (39⅜") All prices include section cut out of table Further details from page

218

219 Palette Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet System table 640/00 A2 M2 640/11 640/71 640/81 Set Mounting position A 1 A 2 A 3 1 M 1 2 M 2 2 M 3 2 Integrated techni-station Basic 701/00 701/10 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 1 from 180 cm table width 2 from 105 cm table depth available A maximum of two built-in component sets per table can be integrated Possible positions: Either A/M 1 and A/M 3 or A/M

220 Palette Mounting positions Integrated techni-station Basic, on both sides or single table portals Integrated techni-station Compact, Move or cable outlet Table configurations 644/51 644/61 644/71 645/51 645/61 645/71 644/11 644/21 644/31 641/11 Set Mounting position A 2 M 2 Integrated techni-station Basic 701/00 701/10 Integrated techni-station on both sides 701/60 701/70 Single table portal Executive Basic Integrated techni-station Compact 701/95 Cable outlet set 707/1 707/2 707/3 available 217

221 640 range Palette Example configurations System table , 6 x 640/00, 150x80 2 x 640/11, 80x177, , 6 x 640/00, 160x80 2 x 640/00, 90x80 4 x 640/10, 80x80 218

222 , 8 x 640/11, 80x155, 30 20, 4 x 640/00, 150x , 1 x 640/00, 120x210 1 x 640/71, 120x150 1 x 640/81, 120x150 14, 4 x 640/00, 150x80 3 x 640/11, 80x153,

223 640 range Palette Example configurations Table configurations , 8 x 641/11, 80x155, 30 16, 8 x 641/11, 80x153, , 12 x 641/11, 80x155, 30 12, 4 x 641/11, 80x177,

224 (279½") , 1 x 644/11, 180x90 1 x 644/21, 180x90 5 x 644/31, 180x (39¼") 150 (59") 22, 1 x 645/51, 100/150x160 1 x 645/61, 100/150x160 3 x 644/71, 150x , 1 x 644/51, 90/120x150 1 x 644/61, 90/120x

225 660 range Travis Design: wiege Technical details Function Modular column table system for creating static table configurations and standalone tables to suit preferences. For traditional conference and executive areas, where wide table spans, special table formats and shapes, as well as perfect integration of multimedia equipment are required. Frame Cast aluminium T-shaped base, bright chrome plated or in silver satin finish, or black coated. Disc base in steel with a stainless steel covering, high-lustre polished or brushed finish. T-shaped base made of tubular steel, bright chrome plated or in silver satin finish, or black coated. Column optionally has a duct for the power supply. Crossbeam with five mounting grooves in extruded aluminium profile, coated in silver satin finish, or black. End closures and pivoting mechanism for attachment to table columns in die-cast aluminium in the same colour as the crossbeam. Table top bearers in die-cast aluminium coated to match the crossbeams in silver satin finish, or black, for attaching the table top; the table top bearers can be precisely positioned within the crossbeam and include plastic devices for levelling out differences in heights when attaching the table top. Black polypropylene glides, optionally with felt inserts (for hard floorings). The T shaped base has colour-matched caps in stainless steel. Core material of table top Plywood, depending on the surface finish with straight, colour-matched plastic lipping or with straight, colour-matched wood lipping. MDF (medium density fibreboard) only in conjunction with veneer with colour matched, chamfered wood lipping. For system elements: straight joining edge. Table top group 1 veneered top and bottom with laminate Table top 26 mm (1 ) thick Laminate from the Wilkhahn colour and surface samples with plastic lipping, colour matched with the finish. (Only straight edges possible!) Table top group 2 veneered top and bottom Table top thickness 26 mm (1⅜") Variation 1: beech, oak or ash veneer based on the Wilkhahn woodstain colour samples (exception: natural ash not possible with chamfered lipping) with wood lipping, as far as possible in the same colour as the veneer. Variation 2: maple (exception: natural maple not possible with chamfered lipping), elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Further finishes for the formats shown in the price list are available on request. 222

226 Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer closed-pore: maple and beech veneer. Some specific growth features possible. Please remember that for barrelshaped, open-centre table configurations and U shaped table configurations with a bullnose double edge profile, the inside edges always have a straight profile. Standards The Travis tables comply with the ANSI / BIFMA X 5.5 standard. Further configurations on request. Edge profiles Chamfered Straight Bullnose double Frame versions Table column Crossbeam and table top bearer 51 T shaped base bright chrome plated Coated silver satin finish or black Coated silver satin finish or black 53 T shaped base coated, colour black Coated black Coated black 54 T shaped base bright chrome plated Bright chrome plated Coated silver satin finish or black 60 T shaped base coated silver satin finish Coated, silver satin finish Coated, silver satin finish 64 Disc base brushed Coated silver satin finish or black Coated silver satin finish or black 72 Disc base high-lustre polished Coated silver satin finish or black Coated silver satin finish or black 74 Disc base high-lustre polished Bright chrome plated Coated silver satin finish or black 223

227 Travis Tables Laminate Straight edge Table top group Veneer variation 1 Straight/bullnose double edge Veneer variation 1 Chamfered edge Veneer variation 2 Straight/bullnose double edge Veneer variation 2 Chamfered edge Rectangular 120 x 280, H 73 (47¼" x 110¼", H 28¾") 661/6 T shaped base, aluminium and column steel tube coated Aluminium bright chrome-plated T shaped base Steel disc base with brushed stainless steel cover Steel disc base with ultra polished stainless steel cover Bright chrome-plated tubular steel table column Barrel shape 120 x 280, H 73 (47¼" x 110¼", H 28¾") 661/62 T shaped base, aluminium and column steel tube coated Aluminium bright chrome-plated T shaped base Steel disc base with brushed stainless steel cover Steel disc base with ultra polished stainless steel cover Bright chrome-plated tubular steel table column

228 Travis Table configurations Laminate Straight edge Table top group Veneer variation 1 Straight/bullnose double edge Veneer variation 1 Chamfered edge Veneer variation 2 Straight/bullnose double edge Veneer variation 2 Chamfered edge Barrel shape 80/120 x 360, H 73 (31½"/47¼" x 141¾", H 28¾") 662/40 Table configuration for 10 12, Comprising 2 segments, T shaped base, aluminium and column steel tube coated Aluminium bright chrome-plated T shaped base Steel disc base with brushed stainless steel cover Steel disc base with ultra polished stainless steel cover Bright chrome-plated tubular steel table column

229 661 range Travis height-adjustable Technical details Function Electrically height-adjustable tables complement the modular Travis table range. The seating height is infinitely adjustable from a minimum of 71 cm to a standing height of 118 cm max. Pressing the button makes the switch between sitting and standing at the table simple. In terms of ergonomics, changing posture at conferences and desks is advisable and this feature makes it easy. Frame Steel, T-shaped base, bright chrome plated or in silver satin finish, or black coated. Telescopic steel table column, bright chrome plated, or in silver satin finish, or black coated; telescopic section always chrome plated. Steel crossbeam, in silver satin finish, or black coated. Underframe facings at the front edges are the same as the table column s surface finish. Black polyamide glides, optionally with felt inserts (for hard floorings). Frame electrically height adjustable from 71 to 118 cm, supply cable 300 cm, 150 cm of which has a black fabric sheath. Core material of table top Particle board, depending on the surface finish with straight, colourmatched plastic lipping or with straight, colour-matched wood lipping. MDF (medium-density fibreboard) only in conjunction with veneer with colour-matched, chamfered wood lipping. Table top group 1 - laminate on the top and bottom Table top 26 mm (1 ) thicklaminate from the Wilkhahn colour and surface samples with plastic lipping, colour matched with the surface. (Only straight edges possible!) Table top group 2 - veneer on the top and bottom Table top thickness 26 mm (1⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples (exception: natural ash not possible with chamfered lipping) with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception: natural maple not possible with chamfered lipping), elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Further surfaces for the formats shown in the price list are available on request. Standards The Travis tables comply with the DIN 147 technical report and DIN EN 527, as well as the GS requirements. Please note The height-adjustable Travis tables (661 range) cannot be linked with one another or combined with Travis (660 range). Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Maple and beech veneer. Some specific growth features possible. Edge profiles Chamfered Straight Bullnose double Frame versions Telescopic table column Crossbeams Under-frame facings 51 T shaped base bright chrome plated 53 T shaped base coated, colour black 54 T shaped base bright chrome plated 60 T shaped base coated silver satin finish Coated silver satin finish or Coated silver satin finish or Bright chrome plated black black Coated black Coated black Coated black Bright chrome plated Coated silver satin finish or Bright chrome plated black Coated, silver satin finish Coated, silver satin finish Coated, silver satin finish 226

230 Travis height-adjustable Tables Laminate Straight edge Table top group Veneer variation 1 Straight/bullnose double edge Veneer variation 1 Chamfered edge Veneer variation 2 Straight/bullnose double edge Veneer variation 2 Chamfered edge Rectangular 90 x 180, H (35⅜" x 70⅞", H 28" 46½") 661/41 Electrically height adjustable ( cm (28" 46½")) T shaped base and table column coated Bright, chrome-plated T shaped base Bright chrome-plated telescopic table column Rectangular 100 x 200, H (39⅜" x 78¾", H 28" 46½") 661/41 Electrically height adjustable ( cm (28" 46½")) T shaped base and table column coated Bright, chrome-plated T shaped base Bright chrome-plated telescopic table column Barrel shape 80/100 x 230, H (31½"/39⅜" x 90½", H 28" 46½") 661/92 Electrically height adjustable ( cm (28" 46½")) T shaped base and table column coated Bright, chrome-plated T shaped base Bright chrome-plated telescopic table column

231 830 range Cubis Design: wiege, Klaus Franck, Werner Sauer Technical details Function Cube-shaped armchairs and upholstered benches with backrests, as well matching tables with wooden tops for use in informal meeting environments, such as reception areas, lobbies and foyers. Armchairs and upholstered benches with backrest Frame Oval aluminium hollow profile, bright chrome plated, clear or black anodized, or coated. Underside of glides in polyurethane for soft and hard floors. Seat and back Seat, backrest and side sections are solid, cushioned beech frames. Back section with flexible upper edge. Foam composite upholstery with fibre fleece underlay. Table Frame Oval aluminium profile, bright chrome plated, clear or black anodized, or coated. Black polyurethane glides. Core material of table top Birch plywood. Table top group 1 laminate Table top thickness 42 mm (1 5 / 8 ") Laminate according to Wilkhahn colour and surface finish samples. Moulded plywood edge profile, natural oiled finish. Standards Cubis armchairs and settees conform to ANSI / BIFMA X 5.4. Cubis tables conform to ANSI / BIFMA X 5.5. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Table top group 2 veneer Table top thickness 42 mm (1 5 / 8 ") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer. Veneer version As a standard, the veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Frame versions Frame 51 Bright chrome plated 53 Coated black 60 Coated, silver satin finish 62 Clear anodized 63 Black anodized 228

232 Cubis Armchairs and upholstered benches with backrests Upholstery material Armchair ( 16⅞" 28¾" 27⅛" 29⅛") 831/5 Width 69 cm (27⅛") Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated Armchair ( 16⅞" 28¾" 29⅛" 29⅛") 831/51 Width 74 cm (29⅛") Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated Upholstered bench with backrest ( 16⅞" 28¾" 48⅞" 29⅛") 832/5 Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated Upholstered bench with backrest ( 16⅞" 28¾" 60⅝" 29⅛") 833/5 Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated

233 Cubis Low tables Table top group Laminate Veneer variation 1 Veneer variation 2 Square 830/10 60 x 60, H 40 (23⅝" x 23⅝", H 15¾") Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated Rectangular 830/14 60 x 90, H 40 (23⅝" x 35⅜", H 15¾") Frame aluminium coated Frame aluminium anodized Frame aluminium bright chrome plated

234

235 850 range Velas Design: Eric Degenhardt Technical details Function Lightweight and stylish lounge chair with footstool and side table for furnishing lounges, lobbies, receptions, informal meeting areas and homes. Frame Frame combines sections in diecast aluminium, with stretcher and front legs in steel tube, bright chrome plated or coated in black or white. Frame tensioned by bracket in curved, low-profile steel coated to match the black or white coated frame or in silver satin finish in the case of a bright chrome plated frame. The standard version for carpeted floors is with glides at the front; optionally available with additional glides at the rear for hard or soft floors, on request with felt insert. Seat and back Unitary seat and back frames in slim, flat steel tube contained within a 2 ply seamless cover using 3 D shaped knitting technology in high-performance polyester in red, green, dark blue, dark brown, dark grey or black. Softness enhanced with cut foam padding. Foot stool Butt leather cover in dark brown and black, plywood core material. Die-cast aluminium frame, stool legs made of solid steel, obtainable either bright chrome plated, or coated in black or white. Standard glides for carpets, or optionally with felt inserts. Standards Velas lounge chair: DIN EN 1022 Side table Veneer surface in natural ash, natural oak (table top group 2, variation 1) or walnut (table top group 2, variation 2), multiplex core material. Frame: steel flange, coated in black or white, solid steel table legs, obtainable bright chrome plated, or coated in black or white. Standard glides for carpets, or optionally with felt inserts. 232

236 Velas Upholstery material 41 Lounge chair ( 12⅝" 31⅞" 24¾" 31½") 850/1 With cover using 3 D seamless, shaped knitting technology Frame coated 695 Additional charge Frame bright chrome plated 99 Stool 851/3 61 x 43, H 40 (24 x 16⅞", H 15¾") With butt leather cover Frame coated 411 Additional charge Frame bright chrome plated 6 Low table Table top group 2 2 Veneer variation 1 Veneer variation 2 Round 853/1 Ø 45, H 40 (Ø 17¾", H 15¾") Frame coated Additional charge Frame bright chrome plated

237 860 range Asienta Design: Jehs + Laub Technical details Function Upholstered chairs and benches with backrests, benches without backrests, as well as matching tables for use in informal conference areas, such as for example prestigious lobbies, executive offices, in exclusive clubs or homes. Upholstered chairs, upholstered benches with backrests and benches without backrests Frame Die-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Surrounding under frame made of aluminiumextruded profile to match the legs. Black, multi-purpose glides made of plastic for all types of flooring. Seat and back Leaf-sprung seat made of multiplex and solid wood (beech / birch). Back and side sections made of multiplex birch with flexible upper edge due to wide foam inserts that are covered with an elastic fabric. The cushioning is made of cut foam with extra padding. Tables Frame Die-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Under frame made of aluminium-extruded profile to match the legs. Tabletops MDF board (medium density fibreboard), 25 mm (1") or single-pane reinforced glass, 10 mm (⅜"), boards are each placed flush with the under frame. Tabletop group 2 veneer Tabletop thickness 25 mm (1") Variation 1: Beech, oak and ash veneer according to Wilkhahn woodstain colour samples with wooden lipping, as far as possible tocolour-match the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible. Standards The Asienta upholstered chairs and upholstered benches with and without backrests comply with the DIN EN L1 and ANSI / BIFMA X 5.4 standards. Tabletop group 11 glass Tabletop thickness 10 mm (⅜") Single-pane reinforced glass optionally coated in opaque white or black, edges polished. Frame versions 49 Coated signal white 51 Bright chrome plated 53 Coated black 76 Chrome, matt-polished finish 234

238 Asienta Armchairs and upholstered benches with backrests Upholstery material Armchair ( 17⅜" 28⅜" 27½" 27⅛") 861/5 Width 70 cm (27½") Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Armchair ( 17⅜" 28⅜" 30¾" 27⅛") 861/6 Width 78 cm (30¾") Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Upholstered bench with backrest ( 17⅜" 28⅜" 59" 27⅛") 862/5 2 seater Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Upholstered bench with backrest ( 17⅜" 28⅜" 85⅞" 27⅛") 863/5 3 seater Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish

239 Asienta Benches Upholstery material Bench ( 17⅜" 56¾" 27⅛") 864/3 2 seater Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Bench ( 17⅜" 84⅝" 27⅛") 865/3 3 seater Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish

240 Asienta Low tables Table top group Veneer variation 1 Veneer variation 2 Glass Square 860/1 65 x 65, H40 Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Rectangular 860/2 120 x 60, H 40 Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish Square 860/3 120 x 120, H 40 Frame coated Frame bright chrome plated Frame with chrome, matt-polished finish

241 890 range Cana Design: wiege, Fritz Frenkler, Justus Kolberg Technical details Function Versatile uphostered bench with backrest, which may be used as a two seater (with armrests folded down), as a three seater (with armrests folded up) or as a lounger (with seat pulled out). For use in informal meeting environments, such as receptions, foyers, lobbies, single offices or homes. Folded down, armrests may be used as side tables. Frame Steel tube, backrest frame and hinges in aluminium, coated, silver satin finish. Black, adjustable polyamide glides for soft and hard floors. Seat Solid beech frame, lacquered in black, with elasticated membrane. Seat can be pulled out from 78 cm (30¾") to 90 cm (35⅜"). Cushioning with wool fleece overlay. Armrests and backrests Maple, beech or walnut veneered laminboard with concealed solid beech lipping, natural finish. Cushioning with wool fleece overlay. Armrests fold up. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request. Cana Upholstery material Upholstered bench with backrest/ lounger /90 ( 16½" 33½" 78¾" 30¾"/35⅜") 890/6 Armrests and backrests beech veneer Additional charge Maple or walnut veneer

242

243 Quickship Quickship There are cases where short delivery periods are very important to the customer. Which is why Wilkhahn produced an express delivery programme called Quickship to deliver to their customers within eight working days after receipt of order. The Quickship models are pre- produced and are therefore only available in the designs and quantity specified. For project business, the Quickship Project programme provides models available in quantities of 20 maximum and the standard Quickship programme offers a maximum of five task and visitor chairs. 240

244 Quickship Delivery period Up to 20 of each model ex works within 8 working days ON Task chair 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 55174/7 763 With seat cushion, With 3 D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated black swing plates ON Task chair 40/52 97/ ( 15¾"/20½" 38¼"/42⅞" 27⅛" 26") 55174/8 841 like 174/7, but with seat-depth adjustment (approx. 400 to 450 mm) With seat cushion, With 3 D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated black swing plates ON Task chair 40/52 105/ ( 15¾"/20½" 41⅜"/46⅛" 27½" 26") 55175/ Seat and back with management grade upholstery, with upholstered, leather-covered 3D armrests, Upholstery material leather 74/99, Headrest in the same material as the upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Bright chrome plated aluminium star base and swing plates ON Cantilever chair ( 16⅞" 36¼" 24" 23⅝") 55178/7 489 With seat cushion, Stackable 5 high free-standing, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Polypropylene armrests Frame bright chrome plated 241

245 Quickship Delivery period Up to 20 of each model ex works within 8 working days Neos task chair 40/52 92/ ( 15¾"/20½" 36¼"/41" 26" 25¼") 55181/ With 3 D armrests, Adjustment of backrest height and seat depth, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Lockable backrest, Frame polyamide, Castors hard or soft, Fabric 47/10 IN Task chair 40/52 101/ ( 15¾"/20½" 39¾"/44½" 27⅛" 26") 55184/7 614 With seat cushion, Upholstery material Racer 37/99 black, with 2D armrests, armrest pads made of PP back covered with form-fit knit (Formstrick), single ply, 41/99 black, Infinitely variable height adjustment, height-adjustable lumbar support, Trimension, tension control Plastic star base, black, swivel arms black matt coated IN Task chair 40/52 101/ ( 15¾"/20½" 39¾"/44½" 27⅛" 26") 55184/8 719 like 184/7, but with seat-depth adjustment (approx. 400 to 450 mm) With seat cushion, Upholstery material Racer 37/99 black, with 3 D armrests, armrest pads made of PP, back covered with form-fit knit (Formstrick), single ply, 41/99 black, Infinitely variable height adjustment, height-adjustable lumbar support, Trimension, tension control Plastic star base, black, swivel arms black matt coated Stitz 65/90 31 ( 25⅝"/35⅜" 12¼") 55201/2 571 Seat surface leather 74/99 embossed, Frame black 242

246 Quickship Delivery period Up to 20 of each model ex works within 8 working days Aline ( 17⅜" 30¾" 21¼" 22⅞") 55230/1 360 Multi-purpose chair, up to 15-high free-standing, Seat an backrest frame and upholstery in black, Glides, hard or soft Aline ( 17⅜" 30¾" 23¼" 22⅞") 55230/2 400 Multi-purpose chair, up to 15-high free-standing, With armrests, Seat an backrest frame and upholstery in black, Glides, hard or soft 243

247 Quickship Delivery period Up to 5 of each model ex works within 8 working days Sito cantilever chair ( 16½" 33½" 22½" 22") 55241/3 719 Medium-height backrest, With seat and back cushion, Polypropylene armrests, Frame bright chrome plated, Anti-tilt stoppers for carpet, stackable version, Fabric 54/13 Modus Compact task chair 42/53 106/ ( 16½"/20⅞" 41¾"/46⅛" 25¼" 24") 55274/ High backrest, With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Frame aluminium bright chrome plated, Castors hard or soft, Fabric 69/99 Modus Executive task chair 42/53 112/ ( 16½"/20⅞" 44⅛"/48⅜" 26¾" 25⅝") 55284/ High backrest, Seat and backrest with slim, leather-covered cushion, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Armrests aluminium bright chrome plated with leather pad, Frame aluminium bright chrome plated, Castors hard or soft, Leather 74/99 244

248

249 Built-in component sets The usage concept, aesthetic, innovative functionality and first-class materials determine the quality and the return on investment of conference furniture. Another important aspect is how multimedia equipment is integrated in the tables. Whether static table configurations, variable table systems, or mobile and dynamic solutions are required the superb aesthetic and functional quality of the table ranges should also offer options for adding state-of-the-art multi-media equipment. Depending on the requirements, Wilkhahn table ranges can integrate anything that s required for today s technology from cable outlets to different types of fold-out techni-stations for plug and play solutions. As a result, customised solutions are produced where the technology is usually cleverly concealed and part of the table system. 246

250 Built-in component sets Techni-stations, single table portals and cable outlets When it comes to integrating connection panels to the table top there are several solutions: compact, fitted modules that are space-saving to integrate and ideal for round or square tables. Pop-up or fold-out techni-stations with plug-and-play outlets are easy to handle, cables and adaptors also stay on the table top in this case too. The high-quality single table portals coordinate especially well with the table. Even when equipment is connected, only a small strip is visible. The outlets are underneath the table, so that extra cables and chargers can be accommodated in the horizontal cable management sets. If cables are to be inserted through the table top, outlets are available that range from simple plastic to high-quality aluminium solutions. Integrated techni-station Basic Body in aluminium, clear anodized, end panels plastic lacquered similar to RAL 9006, modules in black plastic. Optionally with integrated rubber profile or with integrated brushed profile for cable outlet when closed. Frame surface mounted with hinged mechanism. Pre-wired, including cable. On request, with mechanism that opens by pressing the top. On request, cable harness covered with a black fabric tube. Optionally with the following configurations: 701/00 3 modules: 2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 701/10 4 modules: 2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated techni-station on both sides Body in aluminium, clear anodized, end panels plastic lacquered similar to RAL 9006, modules in black plastic. Surface mounted frame with rotatable connectivity. Pre-wired, including cable. On request, with mechanism that opens at the touch of a button. On request, cable harness covered with a black fabric tube. Optionally with the following configurations: 701/60 3 modules: 2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 701/70 4 modules: 2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long 247

251 Built-in component sets Integrated techni-station Move Frame and lid made of plastic, similar to RAL 9006, Frame and lid made of plastic, similar to RAL 9006, with retractable power strip Clear anodized, aluminium body, modules in black plastic. With integrated mechanism that opens by pressing the top. Pre-wired, including cable. On request, cable harness covered with a black fabric tube. Optionally with the following configurations: 701/85 4 modules: 2 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated techni-station Compact Matt chrome frame modules in black plastic. Pre-wired, including cable. On request, cable harness covered with a black fabric tube. Optionally with the following configurations: 701/95 3 modules: 1 x power supply modules (state local standard on orders) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port Cable outlets 707/1 +++UEBERSETZUNG+++ Cable outlet Black plastic, Ø 80 mm (3⅛") 707/2 +++UEBERSETZUNG+++ Cable outlet Aluminium coated black, Ø 85 mm (3⅜") 707/3 +++UEBERSETZUNG+++ Cable outlet Aluminium clear anodized, Ø 85 mm (3⅜") Single table portal Executive Portal with brushed profile the same colour and material as the table top on both sides. Aperture with real wood lipping, colour matched as far as possible with the table top. Single table portal set 300 x 150 mm, flush with table top, hinges open at an angle of 180. In conjunction with the socket strips there are lots of connection options. Single table portal Basic Aluminium installation frame with portal and brushed profile Frame applied, single table portal set 300 x 120 mm, opens at an angle of 90. In conjunction with the socket strips there are lots of connection options. 248

252 Built-in component sets Socket strips Socket strip made of sturdy, black plastic, to fit underneath the single table portal Executive and Basic. Depending on the table range and mounting position, can be fitted to a mount, in a cable channel or underframe. The appropriate assembly materials are included in the sets. Optionally with the following items: 708/1 Socket strip 3 Modules: 3 x power supply modules (state local standard on orders) 708/2 Socket strip 3 Modules: 2 x power supply modules (state local standard on orders).1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip 4 Modules: 4 x power supply modules (state local standard on orders). 708/5 Socket strip 4 Modules: 2 x power supply modules (state local standard on orders) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛") 708/6 Socket strip 5 Modules: 3 x power supply modules (state local standard on orders) 1 x data module with 2 x RJ45 (category 6, shielded) 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/8 Input cable 3 x 1.5 mm 2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛") 708/9 Extension lead 3 x 1.5 mm 2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜") 249

253 Built-in component sets Cable management Options for cable management sets are just as varied. For horizontal management underneath the table, cable management sets and retractable cable baskets or channels are recommended that contain the technical components. Cables can be inserted vertically in the table legs, via external cable clips or textile sleeving. Horizontal cable management Cable cover for integrated techni-station basic, models 701/00 and 701/10 made of aluminium sheet, affixed to the table top, coated black, with strain anchors on both sides, length 550 mm Cable cover for integrated techni-station Rotate, models 701/60 and 701/70 made of aluminium sheet, affixed to the table top, coated black, with strain anchors on both sides, length 550 mm Cable channel for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6 retractable, made of aluminium extruded profile, coated black with strain anchor and insertion plates to integrate the socket strip, length 540 mm Cable basket for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6 curved, perforated metal basket, retractable, black coated, to fit underneath the table top, with mount for socket strip, metal bracket, black coated Storage mesh for single table portal Executive or Basic, to take a socket strip models 708/1 to 708/6 Polyester, black, size to match table length, with mount for socket strip, metal bracket, black coated Cable holder underneath the table top with hook and loop fastener Anodised aluminium profile with 2 clipped-on polypropylene cable clips with hook and loop straps attached. 250

254 Built-in component sets Vertical cable management sets Cable clip for the table leg made of black glass-fibre-reinforced polyamide to accommodate the cable management on the table frame s upright. Textile sleeving for cables belonging to the techni-stations or socket strips Vertical cable channel mod. 620/2 to manage cables between the uprights in the 620 Logon range, silver satin finish or black coated Cable outlet in the frame leg mod. 641 or 643 for vertical cable management in the 640 Palette range 251

255 Built-in component sets Examples of how techni-stations and single table portals and their cable management systems are integrated Confair folding table Integrated Techni-Station Rotate, Cable management with hook and loop fasteners, Cables covered with textile sleeving Integrated Techni-Station Rotate set, with cable management cover and cable clips on the table leg Timetable Shift Logon Single table portal set, with cable cover cable holder with hook and loop fasteners, cable clip on the table leg Integrated techni-station compact set, cable holder with hook and loop fasteners, vertical cable channel Integrated Techni-Station Rotate set, with cable management cover, cable holder with hook and loop fastener and cable clips on the table leg Palette Integrated Techni-Station Rotate set, with cable management cover cable holder with hook and loop fastener, and cables covered with black textile sleeving Cable outlet set, cable holder with hook and loop fastener and cable outlet on the table leg Single table portal set with cable channel cable holder with hook and loop fastener, and cables covered with black textile sleeving 252

256

257 222 Occo 300 Graph 440 Confair 544 Concentra 600 Conversa Veneer Bonded surface Solid wood HPL solid core Veneer varnished Laminate Veneer Linoleum Laminate Veneer Bonded surface Laminate Veneer Bonded surface E4 1 solid wood edge, rounded on the bottom E2 6 wood lipping symmetrically curved E1 1 Bullnose double edging, concealed lipping E2 3 Straight plastic edging E2 3 Straight plastic edging E2 3 Straight plastic edging E1 2 Bullnose double edging with impact-resilient profile, concealed lipping E2 5 Chamfered wood edging, 12 mm (1/2 ) E2 3 Straight plastic edging E5 1 HPL solid core, Edge chamfered, 4 mm radius E1 3 Straight edging, concealed lipping Edging matrix. Wilkhahn has more than 135 different types of wood-based table tops to choose from, available as standard and customised versions. E1 4 Straight edging with impact-resilient profile, concealed lipping The edging matrix indicates which edging types can or cannot be made for a particular table range in the different surface finishes and thicknesses, or require prior clarification. Concealed lipping is oversailing veneer Visible lipping is pre-glued lipping Laminate Edge always has a natural oiled finish The edge is varnished in the same colour as the table top, concealed lipping is only available as a customised solution Veneer Table top and edging nearly always stained and varnished in the same colour Linoleum Edge oiled with concealed lipping

258 610 Timetable 612 Timetable Smart 614 Timetable Shift 620 Logon 640 Palette 660 Travis Laminate Veneer Linoleum Laminate Veneer Linoleum Bonded surface Laminate Veneer Linoleum Laminate Veneer Linoleum Laminate Veneer Linoleum Laminate Veneer E1 1 Bullnose double edging, concealed lipping E1 1 Bullnose double edging, concealed lipping E1 1 Bullnose double edging, concealed lipping E1 1 Bullnose double edging, concealed lipping E1 3 Straight edging, concealed lipping E2 3 Straight plastic edging E1 2 Bullnose double edging with impact-resilient profile, concealed lipping E1 2 Bullnose double edging with impact-resilient profile, concealed lipping E1 2 Bullnose double edging with impact-resilient profile, concealed lipping E1 2 Bullnose double edging with impact-resilient profile, concealed lipping E2 5 Chamfered wood edging, 12 mm (1/2 ) E2 1 Bullnose double wood edging E2 1 Bullnose double wood edging E2 1 Bullnose double wood edging E2 1 Bullnose double wood edging E2 2 Bullnose double wood edging with impact-resilient profile E2 2 Bullnose double wood edging with impact-resilient profile E2 2 Bullnose double wood edging with impact-resilient profile E2 2 Bullnose double wood edging with impact-resilient profile E2 3 Straight plastic edging E2 3 Straight plastic edging E2 3 Straight plastic edging E2 3 Straight plastic edging E1 3 Straight edging, concealed lipping E1 3 Straight edging, concealed lipping E1 3 Straight edging, concealed lipping E1 3 Straight edging, concealed lipping E1 4 Straight edging with impact-resilient profile, concealed lipping E1 4 Straight edging with impact-resilient profile, concealed lipping E1 4 Straight edging with impact-resilient profile, concealed lipping E1 4 Straight edging with impact-resilient profile, concealed lipping E2 4 Chamfered wood edging, 4 mm (1/8 ) radius

259

260

261 Delivery and Payment Conditions for International Sales 1 General. 1.1 These conditions form an integral part of all our offers and contracts, also in current or future business relationships. They take precedence over any conflicting contractual documents, draft agreements, or terms and conditions of the customer. 1.2 All deviating provisions must be agreed upon in writing and signed by both parties in order to be valid. Notices given or declarations made with respect to individual contracts may also be sent by If we use terms such as DAP, FCA, FOB, CFR, or CIF for the respective order, they shall have the meaning assigned to them in the ICC INCOTERMS 2010; these provisions apply correspondingly to domestic sales. 2 Ordering. 2.1 Our offers are in general non-binding. A contract is not made until the order is confirmed by us. Contracts are normally conditional upon the transaction being covered by trade credit insurance or upon security, such as a bank guarantee, being provided for our claims. This applies also if we confirm an order without reservations. A contract is deemed made when the customer accepts the delivery, at the latest. 2.2 Contracts (orders) are binding and cannot be changed. If change requests are made after the order has been confirmed, we may submit a new offer; in general the customer will be charged for any additional costs. The new offer is accepted when the customer accepts the delivery that is in conformity with the customer s change requests, at the latest. 2.3 By placing an order, the customer warrants that he is solvent and/or of sound financial standing. If we are in doubt, in particular if we receive an adverse notice from a credit insurer after the contract has been entered into, we may choose not to perform the contract or ask to be provided with adequate security or demand advance payment within 4 working days. If this period of time expires to no avail, we may rescind the contract. In the event that the customer fails to provide the contractually agreed-upon security or if he does not provide the security in full (e.g., if he makes only 50 % of the advance payment) within the periods of time agreed upon, we hereby rescind the contract. In the event that the contract is rescinded, we have the right to claim damages, in particular the cost of procuring raw materials and semi-finished products that cannot be used for another purpose. 3 Delivery; Default of Acceptance. 3.1 The delivery will be carried out in accordance with the delivery conditions set forth in the offer or in the order confirmation. 3.2 The customer will be in default of acceptance and have to pay reasonable storage costs if he fails to collect the goods or have them collected or forwarded within two weeks after notice has been given that the goods are ready for shipment. In the event of default of acceptance, we may claim damages in an amount equal to 0.5 % of the order value per week, limited to a maximum of 15 % of the order value in total; this does not exclude a larger claim for damages if we can prove that the damage actually suffered is larger. The customer may prove to us that no damage was suffered or that the damage actually suffered is smaller than the asserted claim for damages. 3.3 The customer has to bear the cost of any fast freight or express delivery made at the customer s request. 4 Quality of the Goods; Samples. 4.1 The quality parameters are stipulated exclusively by the order confirmation. In general, the goods comply with the standards that apply in the European Union; if different standards are to be applied, the customer must so advise us before the contract is entered into. To the extent that reference is made to information contained in brochures when the order is placed, such information is normally to be understood as an example only. 4.2 With natural materials, such as wood or leather, as well as with fabrics, surfaces and linoleum, the customer accepts that any descriptions, illustrations or samples, in particular sample or pattern cards, can only be examples due to the natural and/or typical variations in quality. 4.3 Please be advised that surfaces are subject to wear by normal use during the warranty period. 4.4 If samples are provided, the customer has the same duty of care as with items provided on a loan basis. The customer may keep the samples for a maximum of two months and must return them unasked, at his own expense. 5 Delivery Period; Request for Delivery. 5.1 In the event of delays that are due to force majeure, industrial action, official acts, and business interruptions through no fault of our own, the delivery period will be appropriately extended. The same applies to delays that are due to export restrictions or in the event of acts of war or terrorism in a transit country or in the country of destination. If we prove that we have chosen our supplier carefully and this supplier fails to supply us as agreed, the delivery period will also be extended for the delay so incurred if we cannot reasonably be expected to make a replacement purchase. 5.2 Our failure to meet delivery dates or delivery periods will only entitle the customer to assert remedies after a reasonable additional time period of at least 21 working days has expired. In the event of default due to slight negligence, our liability for damages will be limited on the merits to the additional cost of a replacement purchase; in terms of the amount, it will be limited to 0.5 % of the order value concerned by the default for each entire week of default, up to a maximum of 5 % of the order value concerned. 5.3 We may deliver ahead of schedule and make partial deliveries unless this places the customer at an unreasonable disadvantage. If, contrary to what has been agreed upon, the customer does not collect the goods or have them collected or forwarded, we have the right after the expiry of a period of 2 weeks to invoice the customer for the goods and demand storage fees. 6 Prices. 6.1 Our prices do not include freight, customs duties, taxes, and other fees (e.g., certification costs) that may be incurred; these will be charged to the customer additionally. We will invoice the customer for special packaging e.g., if the customer requests particular lot sizes at cost price. 6.2 If it is agreed that the goods are to be delivered directly to the end user, we will charge freight plus a reasonable handling surcharge. 7 Payment. 7.1 Our invoices are denominated, and have to be paid, in euros; currency risks are borne by the customer. Making deductions is not allowed. If the time allowed for payment is exceeded, we may charge 12 % interest, subject to further damage. 7.2 All payments must be received such that the amount is credited to our bank account by the due date. Incoming payments will be applied to the outstanding receivable that has been due longest, irrespective of the customer s payment instructions, if any. 7.3 Upon default of payment, we may combine all quantities of goods yet to be supplied in a single delivery and make such delivery contingent upon the payment of all invoices due and on an advance payment on the invoices yet to be paid. We may further demand immediate payment of all receivables outstanding at the time of default, for whatever legal reasons and, in particular, under whatever contract, and terminate any agreements concerning payment in installments. Until all outstanding receivables have been paid, we have the right to retain any goods not yet supplied or other services yet to be provided. 8 Warranty for Defects. 8.1 The customer must, without undue delay, carry out a thorough examination of the products supplied; for this purpose, he must examine the entire delivery. The examination must, in particular, include a visual examination of the surfaces. Any defects must be reported to us without undue delay, but in any case within 4 working days after delivery. If an examination does not occur or the defects are not reported, the customer will forfeit all his warranty claims. 8.2 If we bear the transport risk in particular cases, any damage in transit must be confirmed by the carrier upon delivery. If the carrier has not been instructed by us, the customer assigns any and all claims against the carrier to us and delivers to us all the documents that are required to enforce such claims; we hereby accept this assignment. 8.3 Warranty claims for defects become time-barred within two years of the delivery (limitation period). The running of the limitation period will be suspended for the duration of subsequent performance (i.e., replacement delivery or repair); the customer cannot demand upon completion of the subsequent performance that the limitation period start all over again. 8.4 Warranty claims for defects will only exist for defects that are contained in the products manufactured by us upon delivery; this does not, however, apply to materials that have been provided to us by the customer or third parties. 8.5 We will primarily carry out the subsequent performance where appropriate, with the assistance of third parties at the customer s place of business, even if we are aware of the final destination of the consignment, or reduce the purchase price appropriately. We may choose at our discretion, within a reasonable period of not less than 14 days, between subsequent performance replacement delivery or repair and a reduction of the purchase price. If the subsequent performance repair is to be carried out at a place other than the customer s place of business, e.g., at the place of business of the end user, we will invoice the customer for the additional costs thereby incurred. 8.6 If the subsequent performance fails, the customer may rescind the contract, reduce the purchase price, or claim damages. A right to rescind the contract will only exist for defects that affect 30 % of the consignment or eliminate the functionality of the goods supplied. 8.7 The customer is not authorized to return any goods without our express approval. If complaints about defects are unjustified, we may invoice the customer for the cost of examining the defect. 9 Retention of Title. 9.1 The goods remain our property until the customer has paid all claims arising from the business relationship, including future claims and, in particular, any current account balance, or until all bills of exchange and checks that were delivered in payment have been honored. 9.2 Furthermore, the goods remain our property if and to the extent that we assume an obligation to third parties on behalf of the customer until such obligation ceases to exist. 9.3 The customer may sell the goods only in the ordinary course of business; he is not authorized to pledge the goods or transfer them by way of security. To the extent permitted by law, the following provisions apply additionally: if the goods are sold or otherwise made available to third parties, the customer hereby assigns to us all financial and other claims accruing to him. The customer is authorized to collect such claims; in the event of default of payment, this right will be forfeited immediately. 9.4 If the value of the security provided to us exceeds our claims by more than 20 %, we will be obligated to release part of the security upon request. If the customer resells the goods, he must retain title to such. To the extent permitted by law, the following provisions apply additionally: any processing and/or machining of the goods will be done on our behalf and for us, but without any obligation or liability arising from such on our part. If the goods supplied by us are mixed or combined with other items, the customer hereby assigns to us his ownership or coownership rights to the mixed inventory or new item in proportion to the value of our goods. 9.5 The customer is obligated to take out the usual insurance for the goods or include them in any existing insurance policies and hereby assigns to us all of his rights against the insurer. 9.6 The customer is obligated to notify us immediately of any attachment of goods that are subject to this retentionof-title clause or of claims that have been assigned to us. The customer bears the cost of any intervention. 9.7 If the enforcement of the above rights requires formal acts, such as the registration of the goods, under applicable law, the customer is obligated to so advise us and assist us in performing these acts. Should individual provisions of this retention-of-title clause be invalid under applicable law, such provision as is permissible under applicable law and comes closest to the invalid provision shall be deemed agreed upon. 10 Designs; Protection of Designs and Models With designs or similar contracts, the following provisions apply: until the price has been paid in full, the customer is prohibited from using e.g., copying or communicating to the public any designs or concepts that have been created for the customer (irrespective of whether or not they qualify as copyrightable works). We retain all ownership rights and rights of use in respect of illustrations, drawings, sketches, collections, and other records that are made available to the customer; such must be returned to us upon request We are the sole owner of all right, title, and interest in and to any forms, samples, and technical solutions in respect of or in connection with the goods. The customer is prohibited from reproducing, having reproduced, or participating in the distribution of reproduced goods, irrespective of whether we are entitled to industrial property rights and, if so, to what extent. If the customer violates this prohibition, he will be liable to pay a contractual penalty in an amount of EUR 100,000 for each willful or negligent violation; this does not affect any claims for damages to which we may be entitled. We may further exercise any rights to demand that the customer refrain from reproduction, which we may also enforce by obtaining a temporary restraining order. 11 Liability. Claims for damages by the customer which are not based on the violation of material contractual obligations, willful misconduct or gross negligence, or bodily injury are excluded to the extent permitted by law. If excluding such claims is not permissible, they shall be limited to a maximum amount of damages of EUR 2 million. The customer will be fully entitled to any claims for damages which are based on the violation of material contractual obligations, willful misconduct or gross negligence, or bodily injury. To the extent that the law applicable to general terms and conditions allows a further limitation of our liability, such limitation of liability shall be deemed agreed upon. 12 Miscellaneous This agreement shall be governed by German law, with the exception of the law applicable to general terms and conditions. In this respect, the laws that apply in the customer s jurisdiction shall apply The place of performance for the delivery and payment is Bad Münder (urban district: Eimbeckhausen), Germany The place of jurisdiction for all disputes with an amount in controversy of up to EUR 150,000 that arise directly or indirectly from the contractual relationship, including disputes arising from or in connection with bills of exchange or checks, is Hameln, Germany. We may also sue the debtor at the debtor s general place of jurisdiction. Disputes with an amount in controversy of over EUR 150,000 will be finally settled by the court of arbitration at the Hamburg Chamber of Industry and Commerce in accordance with its rules of procedure, as amended from time to time, and the German Code of Civil Procedure (ZPO). There will be three arbitrators. The language of the arbitral proceedings will be English, except in disputes with customers who are based in Austria or Switzerland (in this case, the language of the arbitral proceedings will be German). The place of arbitration is Hamburg, Germany. August 2013 Wilkhahn Wilkening + Hahne GmbH + Co. KG Company registration: Amtsgericht Hannover HRA Sole fully liable partner: Wilkhahn Einrichtungs GmbH Bad Münder Company registration: Amtsgericht Hannover HRB Management: Dr. Jochen Hahne Administrative Board: Jörg Glaser-Gallion (Chairman)

262 Wilkhahn Wilkening + Hahne GmbH+Co. KG Fritz-Hahne-Straße Bad Münder Germany Tel (0) Fax + 49 (0) info@wilkhahn.de Australia Wilkhahn Asia Pacific Head Quarters Wilkhahn Forum Sydney A2, Alexandria Industrial Estate Maddox Street Alexandria NSW 2015 Tel Fax info@wilkhahn.com.au Wilkhahn Forum Brisbane 2/40 Douglas Street Milton QLD 4064 Tel Fax info@wilkhahn.com.au Wilkhahn Forum Melbourne Level 1, 423 Bourke Street Melbourne VIC 3000 Tel Fax info@wilkhahn.com.au Belgium Wilkhahn Lange Lozanastraat Antwerpen Tel Fax info@wilkhahn.be China Wilkhahn Asia Pacific Suite 7602, Building 7 No. 10 Jian Guo Zhong Road Lu Wan District Shanghai Tel Fax info@wilkhahn.com.cn España Wilkhahn S. A. Oficinas centrales y showroom c/ Apolonio Morales 13 A Madrid Telf info@wilkhahn.es France Wilkhahn S.à r.l. 58 rue de Paradis Paris Tél Fax info@wilkhahn.fr Great Britain Wilkhahn Ltd. Wilkhahn Forum London 45 Great Sutton Street London EC1V 0DE Tel. +44 (0) Fax +44 (0) info@wilkhahn.co.uk Hong Kong Wilkhahn Asia Pacific Wilkhahn Forum Hong Kong Rooms , 45 / F China Online Centre No. 333 Lockhart Road Wanchai Hong Kong Tel Fax info@wilkhahn.com.hk Japan Wilkhahn Japan Co., Ltd. Wilkhahn Forum Tokyo Tokyotatemono Aoyama Building B Kitaaoyama, Minato-ku Tokyo Tel (0) Fax + 81 (0) info@wilkhahn.co.jp Maroc Maroc Bureau Autoroute de Rabat - Km 9,200 Aïn Sebaâ - Casablanca Tél Fax info@maroc-bureau.com Nederland Wilkhahn Forum Rotterdam Van Nelle-Ontwerpfabriek Van Nelleweg BC Rotterdam Tel Fax info@wilkhahn.nl Österreich Wilkhahn Handelsges.m.b.H. Wimbergergasse 12 Kundeneingang Kaiserstraße Wien Tel Fax info@wilkhahn.at Schweiz Wilkhahn AG Postgasse 17 Postfach Bern 8 Tel Fax info@wilkhahn.ch Singapore Wilkhahn Asia Pacific Wilkhahn Forum Singapore 20 Martin Road #07-03 Harbour Link Singapore Tel Fax info@wilkhahn.com.sg South Africa Classic Working Life 43 Houghton Drive, Houghton Estate 2198 Johannesburg Tel. +27 (0) info@classicwl.co.za United Arab Emirates Wilkhahn Middle East Office Furniture L. L. C. Dubai Design District Building 6, Office 208 B P.O. Box Dubai Tel (0) Fax (0) info@wilkhahn-me.com United States of America Wilkhahn Forum New York Wilkhahn Inc. 601 West 26th Street Suite 820 New York, NY Tel Fax info@wilkhahn.com Wilkhahn Forum Chicago Wilkhahn Inc. Tree Studios 4 East Ohio Street, Studio 35 Chicago, IL Tel Fax info@wilkhahn.com

263

264 SR WiA/WE/OE engl.