CHEMICAL PUMPS SINCE 1992

Size: px
Start display at page:

Download "CHEMICAL PUMPS SINCE 1992"

Transcription

1 HEIA S SINE 1992 GENERA AAOGE 2017

2 AGDRIVE ENRIFGA S SEAESS AG DRIVE ENRIFGA S In sealless magnetic drive centrifugal pumps, the external magnet is directly connected to the motor shaft and it transmits the torque to the internal magnet. he magnetic field created produces a rotation without physical contact between the parts so the impeller spins and moves the fluid. he rear casing is placed between the two magnet joints and it hermetically closes the hydraulic part from the motor. 1 Head up to 48 mlc. Pump head machined from a block. H SS 316 etallic pumps made in stainless steel AISI316. apacity up to 32 m3/h. Head up to: 24 mlc Gemmeotti can supply three different models of mag drive centrifugal pumps: H PP/PVDF hermoplastic pumps made in PP or PVDF. apacity up to 45 m3/h. Head up to 33 mlc. Injection molded parts. 11 H hermoplastic pumps made in PP or PVDF. apacity up to 130 m3/h AERIAS IN ONA WIH HE IID ENRIFGA S PAR NBER DESRIPION H PP/PVDF H H SS HEAD PP OR PVDF PP OR PVDF AISI ORING EPD OR VION EPD OR VION EPD OR VION 3 ASING HRS BSH ERAI AI 2 + EPD OR VION ERAI AI 2 + EPD OR VION PFE 4 SHAF ERAI AI 2 99,7% ERAI AI 2 99,7% HASEOY BEARINGS PFE PFE PFE 6 IPEER PP OR PVDF PP OR PVDF AISI INERNA AGNE PP OR PVDF + NdFeB PP OR PVDF + NdFeB AISI Smo 8 REAR ASING PP OR PVDF PP OR PVDF AISI 316

3 12 H PP/PVDF HEROPASI AGDRIVE ENRIFGA S SANDARD: Gas threaded In and Out connections. Direct starting motor. OPIONA: Flanges available. Dryrunning protection. Baseplate. Silicon carbide sleeve bearing. H pumps are available also for NEA motors and with NP connections. AIN FEARES ag drive centrifugal pumps series H PP/PVDF are made of thermoplastic materials (Polypropylene and PVDF) and are suitable for high corrosive liquids. hanks to the innovative mag drive system, pumps model H PP/PVDF reduce the risks of leakage and emissions and the maintenance costs. he transmission of the motion occurs through magnetic joints without any mechanical seal and this design guarantees the maximum safety and efficiency. he pumped liquid has to be clean and without solids in suspension. aterials available: PP / PVDF. aterials in contact with the liquid; casing and impeller: PP/PVDF; oring: EPD (standard for PP pumps); VION (standard for PVDF pumps); static shaft: Al2O3 99,7 %; Bushing PFE. ax flow: 45 m3/h; ax head 33 mlc. emperature: PP: max 70 PVDF: max 90. ax viscosity: 200 cst. Pressure rating: NP 6 at 20. High torque magnetic coupling NdFeB standard. Suitable for high corrosive liquids. PERFORANE RVES 50HZ 2900 RP H 50 H (m) H H 31 H 15 8 H 10 4 H 6 H (mc/h)

4 1. AGDRIVE ENRIFGA S H PP/PVDF EHNIA DAA SIZE AERIA AX H AX SION DISHARGE WEIGH (KG) 50HZ (3/H) 60HZ (SGP) 50HZ () 60HZ (F) ONNEION ONNEION PP PVDF SIABE POWER (KW) 2900 rpm / FANGE AND FRAE H 4 PP PVDF 3, FE 1/ ,12 / 56 B B3/B5 H 6 PP PVDF 6,5 30 8,5 42 FE 3/ ,25 / 63 B B3/B5 H 10 PP PVDF / FE ,55 / 71 2B B3/B5 1,1 / 80 B B3/B5 H 15 PP PVDF / ,1 / 80 B B3/B5 1,5 / 90 S B3/B5 H 31 PP PVDF / ,2 / 90 B3/B5 3 / 100 B3/B5 4 / 112 B3/B5 H 40 PP PVDF / / 100 B3/B5 4 / 112 B3/B5 H 50 PP PVDF / ,5 / 132 S2A B5 7,5 / 132 S2B B5 H 4610 PP/PVDF DIENSIONS H 4610 PP/PVDF S R FANGES DIN PN E O Z V DNs P H I Hs G B A N D ' V' R' S' ' FANGE B3 B5 E O KW NOE: DIREION OF FANGES IS ONER DIENSIONS OKWISE mm AS SEEN WHEN FAING HE. S AVAIABE R S HREADED OR FANGED. V Z DNs * Different H according 4 to the manufacturer. ** OPIONA PON REES: Baseplate Flanges H NOA: ROAZIONE ANIORARIA VISA DA E. H POPE DISPONIBII ON AAHI FIEAI O FANGIAI. * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange DIENSIONS mm BASEPAE DIENSIONS mm A B D E Hs G H I * N O P R S V 1/ H 4 56 B FE FANGES DIENSIONS mm 130 H 6 63 B I /4 FE R S V Z DNs H B / FE H /2 H 10 80B FE H ' * Different according to the manufacturer. ** OPIONA PON REES: Baseplate Flanges. H 10 NOE: DIREION OF IS ONER OKWISE V' AS SEEN WHEN FAING HE S AVAIABE HREADED OR FANGED. PO. DIENSIONS mm BASEPAE DIENSIONS mm

5 H PP/PVDF H 153 PP/PVDF DIENSIONS H 153 PP/PVDF FANGES DIN PN 10 P S R S R Z V DNs Hd FANGES DIN PN 10 Z V DNs P Hd F G A N D Hs F G B A N D Hs BR' S' ' 14 O E O R' S' NOE: DIREION OF IS ONER OKWISE ' AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED. * Different according NOE: DIREION to the manufacturer. OF IS ONER OKWISE ** OPIONA PON REES: AS SEEN WHEN Baseplate FAING Flanges HE. S AVAIABE HREADED OR FANGED. NOA: ROAZIONE * Different ANIORARIA according VISA to the DA manufacturer. E. POPE DISPONIBII ON AAHI FIEAI O FANGIAI. ** OPIONA PON REES: Baseplate Flanges * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange NOA: ROAZIONE ANIORARIA VISA DA E. POPE DISPONIBII ON AAHI FIEAI O FANGIAI. * Diverso a seconda del fornitore. ** S RIHIESA: Piede d appoggio Flange E I ' V' I ' V' H H BASEPAE DIENSIONS mm H H R S V H PO. DIENSIONS mm BASEPAE DIENSIONS mm FANGE kw B3 B5 A B D E F DIENSIONS G Hs mm Hd I * N O P BASEPAE R S DIENSIONS mm V FANGE KW B3 B5 A B D E F G Hs Hd I H 15 G 80 B 1, * N O P /2 R S V / H B 1, /2 H 15 G 90 S 1, / H S 1, /2 H 31 G 90 2, / H , /21/2 H 31 H G /2 H / H 40 G , /2 H , /2 H 40 G , /2 H , * Different according to the manufacturer. ** OPIONA PON REES: Baseplate Flanges. NOE: DIREION OF IS ONER OKWISE AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED. FANGES DIENSIONS mm R S V Z DNs FANGES DIENSIONS mm H R S V Z DNs

6 1. AGDRIVE ENRIFGA S H 50 PP/PVDF H 50 PP/PVDF DIENSIONS 15 FANGES DIENSIONS mm R S V Z DNs H FANGE B3 B5 KW DIENSIONS mm A B D E F G H Hs Hd I ~ N O P H S2A 5, H S2B 7, /2 1/2 OPIONA PON REES: Flanges. NOE: DIREION OF IS ONER OKWISE AS SEEN WHEN FAING HE. S AVAIABE HREADED OR FANGED.

7 GEEOI SR Via A. Volta 85/A eriano aghetto B IAY EROPEAN NION Ph: Fax: info@gemmecotti.com

CHEMICAL PUMPS SINCE 1992

CHEMICAL PUMPS SINCE 1992 CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE CENTRIFUGAL S SEAL-LESS MAG DRIVE CENTRIFUGAL S In seal-less magnetic drive centrifugal pumps, the external magnet is directly connected to the motor

More information

CHEMICAL PUMPS SINCE 1992

CHEMICAL PUMPS SINCE 1992 CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2017 MAG-DRIVE TURBINE S SEAL-LESS MAG DRIVE TURBINE S In seal-less magnetic drive turbine pumps, the external magnet is directly connected to the motor shaft and

More information

CHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19

CHEMICAL PUMPS SINCE 1992 GENERAL CATALOGUE 2018/19 CHEMICAL S SINCE 1992 GENERAL CATALOGUE 2018/19 MAG-DRIVE ROTARY VANE S SEAL-LESS MAG DRIVE VANE S In seal-less magnetic drive vane pumps, the external magnet is directly connected to the motor shaft and

More information

ARBO. ARBO Magnetic drive pumps. Pompen en Filters b.v. Product group 2.2

ARBO. ARBO Magnetic drive pumps. Pompen en Filters b.v. Product group 2.2 ARBO Pompen en Filters b.v. ARBO Magnetic drive pumps Product group 2.2 Product group 2.2 MagPro Working principle Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic

More information

VERTICAL MULTISTAGE PUMPS SSV-F Hz

VERTICAL MULTISTAGE PUMPS SSV-F Hz VERTICAL MULTISTAGE PUMPS SSV-F 1-3 - 6-1 - 15 5Hz TABLE OF HYDRAULIC PERFORMANCES AT 5Hz PUMP TYPE RATED POWER H1 Q = DELIVERY l/min 8,3 16,7, 33,3 2 5, 58,3 67 75, m³/h,5 1 1,5 2 2,5 3 3,5,5 kw HP Bar

More information

SP SERIES SELF-PRIMING MAG DRIVE

SP SERIES SELF-PRIMING MAG DRIVE SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical

More information

HTM PP/PVDF HTM SS 316 HCM HCO. Our company Pag. 04. HTM PP/PVDF Pag. 06. The quality management system Pag. 04. HTM SS 316 Pag.

HTM PP/PVDF HTM SS 316 HCM HCO. Our company Pag. 04. HTM PP/PVDF Pag. 06. The quality management system Pag. 04. HTM SS 316 Pag. Our company Pag. 04 The quality management system Pag. 04 Product quality Pag. 05 Our mission Pag. 05 GemmeCotti is online Pag. 05 GemmeCotti Pumps Pag. 05 HTM PP/PVDF Pag. 06 HTM SS 316 Pag. 07 HCM Pag.

More information

Industrial-process. centrifugal pumps.

Industrial-process. centrifugal pumps. R Industrial-process centrifugal pumps www.cdrpompe.com CDR pumps - Innovative thinking general R CDR pumps - Innovative thinking since the early 60s The origins of CDR pumps date back to the early 60s

More information

UTN-L / UTN-BL I frame

UTN-L / UTN-BL I frame UTN-L / UTN-BL I frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps

More information

MODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS

MODEL MAGPRO AM PG 2.2 CENTRIFUGAL PUMPS MODEL MAGPRO AM M A G N E T I C D R I V E PG 2.2 CENTRIFUGAL PUMPS WORKING PRINCIPLE Magnetic drive pumps are Seal-less. The driving torque is transmitted by a permanent magnetic coupling to an internal

More information

NS Series Non Metallic End-Suction Centrifugal Pumps

NS Series Non Metallic End-Suction Centrifugal Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND PACKING Corrosion Resistant Chemical Pumps Non Metallic End-Suction Centrifugal Pumps GFRPP CFRPVDF MECHANICAL SEAL GLAND

More information

DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS

DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity

More information

UTN-L / UTN-BL II frame

UTN-L / UTN-BL II frame UTN-L / UTN-BL II frame Lined Magnetic Drive Process Centrifugal Pumps UTN-BL 125-80-160 PFA CLOSE COUPLED EXECUTION Plastic and Fluoroplastic Lined Magnetic drive Horizontal - Single Stage - Process Centrifugal

More information

DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS

DM 06 MAGNETIC DRIVE CENTRIFUGAL PUMPS DM 6 Product of Italian origin Available in PP-PVDF Below head use No welded seams Max. flow rate from 7 m 3 /h Max head 8, m Extremely easy maintenance Low cost of spare parts No fluid leaks Viscosity

More information

TECHNICAL DESCRIPTION

TECHNICAL DESCRIPTION TECHNICAL DESCRIPTION STN-SP are self-priming magnetic driven centrifugal pumps in close-coupled execution. Ideal for safe installation priming from the top of vessels and/or tanks for transferring acids,

More information

Tapflo - your reliable pumpchoice

Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice Tapflo - your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial

More information

CTM magnetic drive centrifugal pumps rev 1

CTM magnetic drive centrifugal pumps rev 1 CTM magnetic drive centrifugal pumps 2012 rev 1 your reliable pumpchoice With experience from industrial fluid handling and pump manufacture since 1970, we know what you as a customer require from an industrial

More information

Horizontal And Vertical Centrifugal Pumps

Horizontal And Vertical Centrifugal Pumps Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid

More information

ETS. Metallic Magnetic Drive Centrifugal Pumps ETS 50 WITH MOTOR. Pompe S.r.l.

ETS. Metallic Magnetic Drive Centrifugal Pumps ETS 50 WITH MOTOR. Pompe S.r.l. ETS Metallic Magnetic Drive Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Centrifugal pumps Sub-ISO designed Materials : AISI 316 (1.4408) Close-coupled execution ETS 50 WITH MOTOR

More information

Non-Metallic Seal-less Mag-Drive Pumps

Non-Metallic Seal-less Mag-Drive Pumps Non-Metallic Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists SOLID PP & PVDF Thermoplastic Mag-Drive Pumps Centrifugal, Turbine & Self-Priming From WARRENDER: Advanced design, materials

More information

UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. HE: High Efficiency. Comply to : 2006/42/CE

UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. HE: High Efficiency. Comply to : 2006/42/CE UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction

More information

Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for

Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket. our. contribution for Sealless magnetic coupled centrifugal pump Type NMR Design with heavy duty oil lubricated bearing bracket our contribution for environmental protection GENERAL DICKOW-pumps of series NMR are sealless centrifugal

More information

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS

NELES FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS NELES FLANGED FULL BORE BV BALL VALVE, SERIES 1 FOR PN RAINGS etso's Neles modular ball valve series 1, offers optimized performance of pulp and paper applications. Series, incorporates etso's leading

More information

Alloy version available please call for specifications.

Alloy version available please call for specifications. Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.

More information

ARBO. Pompen en Filters b.v.

ARBO. Pompen en Filters b.v. ARBO Pompen en Filters b.v. Product group 1.1 Chemical pumps SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency. This series

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 1506 203 PERFORMANCE CURVE 2006 203 PERFORMANCE CURVE 3006 203 PERFORMANCE CURVE 4006 203

More information

Centrifugal pumps. made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies

Centrifugal pumps.  made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical and horizontal centrifugal pumps www.jesspumpen.com Centrifugal pumps made of Polypropylene and PVDF for transferring aggressive media like acids and alkalies Vertical centrifugal pumps of the

More information

316 Stainless Steel Submersible Pumps 8" 10" 12"

316 Stainless Steel Submersible Pumps 8 10 12 316 Stainless Steel Submersible umps 8" 10" 12" Stainless Steel Submersible umps 40 to 540 m 3 /h The FS Series pumps have been engineered in all AISI 316 stainless steel for efficient and reliable pumping

More information

50Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials

50Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials 5Hz Route range ZMR mechanical sealed TMR magnetical driven centrifugal pumps in thermoplastic materials 2 Route TMR - ZMR In this catalog Argal proposes the range of ROUTE pumps, inclusive of magnetical

More information

Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications

Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications Prolac MSHCP I Application Due to the choice of aterials and its design, PROLAC HCP is appropriate for applications requiring a high level of hygiene, it offers gentle handling of the product and resistance

More information

Standard plastic pump with magnetic coupling for use in the chemical industry ISO 2858/DIN EN 22858

Standard plastic pump with magnetic coupling for use in the chemical industry ISO 2858/DIN EN 22858 Standard plastic pump with magnetic coupling for use in the chemical industry ISO 2858/DIN EN 22858 Standard plastic pump with magnetic coupling for use in the chemical industry ISO 2858 / DIN EN 22858

More information

KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199

KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199 KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal

More information

Thermoplastic Centrifugal Pump Type NMB-S

Thermoplastic Centrifugal Pump Type NMB-S ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump Type NMB-S Suction

More information

MMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS

MMI L STAINLESS STEEL CENTRIFUGAL PUMPS Clean or slightly muddy liquids Corrosive fluids - Acids - Solvents OPERATING RANGES APPLICATIONS OPERATING RANGES Flow rates of up to: m /h Manometric head of up to: mcl Max. operating pressure: / bar Temperature range: - C to + C DN (nominal diameter) of ports: Male Max. viscosity: cst MMI L STAINLESS

More information

TI TOWN CHEMICAL PUMPS

TI TOWN CHEMICAL PUMPS TMI Series (Industrial-process thermoplastic resin centrifugal pumps) Exceptional mechanical strength provided by the ductile cast iron (FCD 450) pump casing and non metallic back casing cover TI TOWN

More information

DGN. Set-back Vortex impeller. electrical submersible pumps. General characteristics

DGN. Set-back Vortex impeller. electrical submersible pumps. General characteristics PRODU AALOGUE Set-back Vortex impeller General characteristics Set-back Vortex impeller,, kw motor power / / 6 poles GAS / vertical DN65 DN50 PN0-6 horizontal max 50 mm free passage Electromechanical assembly

More information

Infinity i-star 13 Flow: 13 m3/h - 6 m.w.c. A Infinity i-star 17 Flow: 17 m3/h - 6 m.w.c. A

Infinity i-star 13 Flow: 13 m3/h - 6 m.w.c. A Infinity i-star 17 Flow: 17 m3/h - 6 m.w.c. A PUMPS & BLOWERS 2011 PUMPS & BLOWERS PUMPS Series I - STAR Self priming centrifugal pumps for swimming pool with prefilter Quiet operation Prefilter with specially constructed clear lid with ring lock

More information

VERTICAL PUMPS T RANGE

VERTICAL PUMPS T RANGE 022013 VERTICAL PUMPS surface treatment transfer agitation of chemical tanks cosmetics metallurgy France SIEBEC SAS 9 rue des platanes ZAC Vence Ecoparc 38120 SAINT-ÉGRÈVE England SIEBEC UK Ltd Unit 3

More information

ARBO. ARBO Chemical pumps. Pompen en Filters b.v. DIN-EN ISO 2858 with mechanical seal. Product group 1.0

ARBO. ARBO Chemical pumps. Pompen en Filters b.v. DIN-EN ISO 2858 with mechanical seal. Product group 1.0 ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585 - ISO 2858 with mechanical seal Product group 1. ARBO Pompen en Filters b.v. ARBO Chemical pumps DIN-EN 22585-ISO 2558 with mechanical seal

More information

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor

More information

VIKING SG SERIES SEALLESS MAG DRIVE PUMPS

VIKING SG SERIES SEALLESS MAG DRIVE PUMPS SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE

More information

Centrifugal Immersion Pumps

Centrifugal Immersion Pumps Centrifugal Immersion Pumps FLUX Centrifugal Immersion Pumps Quality that sets standards. Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process

More information

K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS

K-BALL BALL VALVES FOR INDUSTRIAL AND PROCESS APPLICATIONS A comprehensive range of ball valves to suit a wide variety of industrial applications FEAURES he range includes one, two and three piece ball valve designs with screwed, weld or flanged end connections.

More information

Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML

Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive. Series CNH-ML Volute Casing Centrifugal Pumps in High Temperature Design with Magnetic Drive Series CNH-ML Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service

More information

CENTRIFUGAL IMMERSION PUMPS

CENTRIFUGAL IMMERSION PUMPS CENTRIFUGAL IMMERSION PUMPS FLUX CENTRIFUGAL IMMERSION PUMPS QUALITY THAT SETS STANDARDS Manufactured at our main plant, these ranges of immersion pumps are the result of extensive product and process

More information

UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. Pompe S.P.A.

UTS HE / UTS-B HE. Metallic Magnetic Drive Process Centrifugal Pumps. UTS-B Close Coupled Execution. Pompe S.P.A. UTS HE / UTS-B HE Metallic Magnetic Drive Process Centrifugal Pumps Metallic Magnetic drive Horizontal - Single Stage - Process Centrifugal pumps Materials : AISI 316 (1.4408) Close-coupled and End-suction

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304 CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES

More information

6 50 Hz Stainless Steel Submersible Pumps

6 50 Hz Stainless Steel Submersible Pumps Hz Stainless Steel Subersible Pups -Inch: 1, 19,, & /h flow ratings Advanced technology in perforance and reliability. Stainless Steel Subersible Pups Subersible Pups - Hz 7 U S gp 1 1 SR 19 up to 7 kw

More information

ANSI DIME. Engineered for EXTREME Reliability in Chemical Processes

ANSI DIME. Engineered for EXTREME Reliability in Chemical Processes Pat. No. 5,779,456 ANSI DIME Extreme situations call for extreme measures. Finish Thompson s ULTRAChem is a magnetically driven, ANSI dimensional pump engineered for the utmost reliability in even the

More information

Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858

Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858 Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858 Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO

More information

NJK Series ISO Standard End-Suction Centrifugal Pumps

NJK Series ISO Standard End-Suction Centrifugal Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Armour Type Corrosion Resistant Chemical Pumps ISO Standard End-Suction Centrifugal Pumps PVDF CFRPVDF ISO 8 ISO 5199 EN 28

More information

SNM / SNM-V. Close - Coupled Centrifugal Pumps ATEX SNM EN

SNM / SNM-V. Close - Coupled Centrifugal Pumps ATEX SNM EN EN ISO 9905 SN / SNV Close Coupled Centrifugal umps ATEX SN 00 1111 EN General Information SN / SNV Liquids Handled SN / SNV type pumps are suitable for nonaggresive, clean or slightly contaminated liquids

More information

Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M

Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically

More information

SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive

SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA Side channel pumps PN 25 (40) Glandless because of magnetic drive SEMA-S SEMA-L with reference to DIN EN 734 SEMA-Z with reference to DIN EN 734 SEMA-Block in closed-coupled design for extremely low

More information

A measured step forward

A measured step forward A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience

More information

A measured step forward

A measured step forward A measured step forward Centrifugal pumps Dosing Conveying Control Liquids Gases Systems Chemical centrifugal pumps For industrial piping construction Tradition creates innovation Many decades of experience

More information

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS

More information

Submersible. Pumps Motors. 60Hz 8 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 8 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution 1 Product data Stainless steel submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection

More information

Thermoplastic Centrifugal Pump type NMB

Thermoplastic Centrifugal Pump type NMB ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33.7 99-0 Fax +49 (0) 57 33.7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Thermoplastic Centrifugal Pump type NMB Suction

More information

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN

GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.

More information

Chemical Motor Pump Unit BN

Chemical Motor Pump Unit BN MB / General Pump BN-type motor pump units are normal-priming, singlestage, plastic centrifugal pumps in block design with horizontal axis. Their dimensions and flow rates mainly correspond to DIN/EN.

More information

Verdermag Global Style series

Verdermag Global Style series 125 series GENERAL 125 Horizontal End-Suction centrifugal pump Centerline discharge Mag-drive Synchronous coupling Back-pull out design Maximum possible temperature: 205 C Minimum possible temperature

More information

WMDA Series WMDA. Seal-less Mag-Drive Pumps. MAG-DRIVE ANSI-B73.1 ISO-2858 or API-685 CENTRIFUGAL PUMPS

WMDA Series WMDA. Seal-less Mag-Drive Pumps. MAG-DRIVE ANSI-B73.1 ISO-2858 or API-685 CENTRIFUGAL PUMPS Seal-less Mag-Drive Pumps Seal-less Mag-Drive Pump Specialists WORKING LIMITS QMAX = 1800 USGPM @ 3500RPM; 350 cm/h @ 2900 RPM HMAX = 700 ft @ 3500RPM; 150 m @ 2900RPM T = -212 F (-100 C) up to 662 F (350

More information

our contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB

our contribution for environmental protection Sealless magnetic coupled centrifugal pumps acc. to EN Type NML / NMB Sealless magnetic coupled centrifugal pumps acc. to EN 22858 our contribution for environmental protection Type NML / NMB General Magnetic coupled DICKOW-pumps of the series NM are sealless pumps. The

More information

Matrix_Techdata_SS_V14

Matrix_Techdata_SS_V14 Matrix_Techdata_SS_V4 CONTENTS V4 SPECIFICATIONS Page Features & Applications Typical Exploded View Pump & Motor Specifications Selection Chart / Type key 3 Selection Chart 4 PERFORMANCE CURVES Performance

More information

CRN15-09 A-P-G-V-HQQV 3x400/ HZ

CRN15-09 A-P-G-V-HQQV 3x400/ HZ GRUNDFOS DATA BOOKLET CRN15-9 A-P-G-V-HQQV 3x/69 5 HZ Grundfos Pump 9652 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn15/9652/crn-15-9-a-p-g-v-hqqv.html

More information

Single-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating

Single-stage centrifugal pumps to standards en 733 (nfe 44111) and iso 5199 Industry Agriculture - Heating OPERATING LIMITS Flow up to : m /h Head up to : mce Service pressure up to : Jusqu à bar* Temperature range : - à +7 C hot water up to : + C * depending on model NOLH Single-stage centrifugal pumps to

More information

SCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.

SCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal. SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description

More information

seal-less Magnetic drive PuMPs

seal-less Magnetic drive PuMPs seal-less Magnetic drive Pumps MAXP Magnetic Drive ANSI Process Pumps MP / MPL / MPH ANSI & Sub ANSI Magnatex MAXP Series ANSI process pumps are available in a wide variety of materials to meet demanding

More information

Dimensional Data. C Series: INLINE Shaft Output

Dimensional Data. C Series: INLINE Shaft Output SMS Reder Opiona Op Fange For F Rond Op Fange s Ony (Noe: opiona fanges are no avaiabe on a sizes) s1 Dia. on e1 o ire b1 a1 0 f1 1 Aoodae NEMA -Frae Moors 050 1 050 2 180 3 4 050 180 2 5 180 2 8 250 280

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 GEOMETRIC TOLERANCES 401 PACKING 402 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 150 203 PERFORMANCE CURVE 200 204 PERFORMANCE CURVE 300 205 PERFORMANCE CURVE 400 206 - CONSTRUCTIONS

More information

Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant

Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Chemical Magnetic Pumps with PTFE/PFA lining ATEX- and FDA compliant Highly corrosionresistant pumps for absolute aggressive liquids and dangerous liquids. Energy-efficient pumps and chemical pumps Sustainable

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401

- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304 CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE 201 SELECTION CHART 202 TYPE KEY 203 CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE 32-250/9.2

More information

Materials: Parts of the pump in contact with the liquid are manufactured from the following standard

Materials: Parts of the pump in contact with the liquid are manufactured from the following standard Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They

More information

SPECIFY THE RIGHT HOT OIL PUMP FOR YOUR APPLICATION

SPECIFY THE RIGHT HOT OIL PUMP FOR YOUR APPLICATION SPECIFY THE RIGHT HOT OIL PUMP FOR YOUR APPLICATION Hot oil pumps are used in a range of industries, with their main user being the heat transfer oil customer. Often, oil temperatures will exceed 500 F

More information

1 Full Year Factory Warranty SIKO PUMP

1 Full Year Factory Warranty SIKO PUMP Catalogue No. SIKO-CQB-003 B A CATALOUGE FOR CQ MAG- DRIV E CEN TRIFUGAL PUMP 1 Full Year Factory Warranty Food & Beverage Mining Paints & Dyes Petrochemical Pharmaceutical Pulp & Paper Power & Energy

More information

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW

More information

DGN. Set-back vortex impeller. electrical submersible pumps. General characteristics

DGN. Set-back vortex impeller. electrical submersible pumps. General characteristics electrical submersible pumps www.ipspumps.be Set-back vortex impeller General characteristics Set-back vortex impeller motor power,, kw poles / / 6 delivery port GAS / vertical DN65 DN50 horizontal free

More information

Company name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017

Company name: GRUDNFOS VisMin Created by: Kimmboy Ancis Phone: Date: 13/03/2017 Position Qty. Description 1 CM5-4 S-R-I-E-AQQE Product No.: 98482185 Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The pump

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 20 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 32-250/5.5 205 PERFORMANCE CURVE 32-250/7.5 205 PERFORMANCE CURVE

More information

SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES

SUBMERSIBLE PUMPS 6 STAINLESS STEEL SR SERIES FEATURES FEATURES Stainless steel impellers and diffusers to resist corrosion Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures than

More information

SUBMERSIBLE PUMPS 6" STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS

SUBMERSIBLE PUMPS 6 STAINLESS STEEL SR SERIES FEATURES SPECIFICATIONS APPLICATIONS FEATURES n Stainless steel impellers and diffusers to resist corrosion n Heavy-duty stainless steel shell assures permanent alignment of all components to increase longevity and enables higher pressures

More information

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303 SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS

More information

VERTICAL IN-LINE PUMP

VERTICAL IN-LINE PUMP VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line

More information

abcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG

abcdef EUseries EN733/DIN End Suction Centrifugal Pumps   where innovation flows SNG abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X

More information

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303

- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303 SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS

More information

Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution

Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution Stainless Steel Submersible Pumps DATA BOOKET ISO 1 Company Pumping Solution Hz Photographs of a few Manufacturing Units Submersible Pumps Motors Hz 4 Submersible Pump Pumping Solution 11 Product data

More information

HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO DIN 24256

HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO DIN 24256 HEAVY DUTY HORIZONTAL, SEALLESS CENTRIFUGAL PUMP WITH PERMANENT MAGNET DRIVE SYSTEM, NO MECHANICAL SEAL ISO 2858 - DIN 24256 CN MAG-M Series The separation of liquid chamber/atmosphere by means of an isolation

More information

MAN. Single-channel open impeller. motralec. electrical submersible pumps. General characteristics

MAN. Single-channel open impeller. motralec. electrical submersible pumps. General characteristics motralec 4 rue Lavoisier. ZA Lavoisier. 953 HERBLAY CEDEX el. : 0.39.97.65.0 / Fax. : 0.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com Single-channel open impeller

More information

Angle Seated Valves. ecoflo-as. Angle Seated Valves

Angle Seated Valves. ecoflo-as. Angle Seated Valves Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves

More information

KTM SERIES EF190FE TWO-PIECE FULL BORE BALL VALVES SPLIT BODY FLANGED BALL VALVE - FUGITIVE EMISSION CERTIFIED AND FIRE TESTED

KTM SERIES EF190FE TWO-PIECE FULL BORE BALL VALVES SPLIT BODY FLANGED BALL VALVE - FUGITIVE EMISSION CERTIFIED AND FIRE TESTED M EIE EF190FE WO-PIECE FLL BOE BALL VALVE PLI BODY FLANGED BALL VALVE - FGIIVE EMIION CEIFIED AND FIE EED igh performance two-piece ball valve for demanding process applications where fire-safe and fugitive

More information

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC

- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE DWC PERFORMANCE CURVE DWC CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 300 203 PERFORMANCE CURVE 500 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL

More information

Chemical Pumps. With mechanical seal. Non-Metallic Close-Coupled Chemical Pump Type NP-B

Chemical Pumps. With mechanical seal. Non-Metallic Close-Coupled Chemical Pump Type NP-B Chemical Pumps With mechanical seal Non-Metallic Close-Coupled Chemical Pump Type NP-B In PP / PE-UHMW / PVDF Casing dimensions to EN 2288 / ISO 288 Applications Type NP-B chemical pumps are the solution

More information

CRI10-04 A-FGJ-I-E-HQQE 3x230/ HZ

CRI10-04 A-FGJ-I-E-HQQE 3x230/ HZ GRUNDFOS DATA BOOKLET CRI10-04 A-FGJ-I-E-HQQE 3x230/400 50 HZ Grundfos pump 96500995 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/cri10/96500995/cri-10-4-a-fgj-i-e-hqqe.html

More information

CRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ

CRN1S-21 A-FGJ-G-E-HQQE 3x230/400 50HZ GRUNDFOS DATA BOOKLET CRN1S-21 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96515918 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crn1s/96515918/crn-1s-21-a-fgj-g-e-hqqe.html

More information

Chemical Pumps. With mechanical seal. Non-Metallic Standardized Chemical Pump Type NP. In PP / PE-UHMW / PVDF Dimensions to EN / ISO 2858

Chemical Pumps. With mechanical seal. Non-Metallic Standardized Chemical Pump Type NP. In PP / PE-UHMW / PVDF Dimensions to EN / ISO 2858 Chemical Pumps With mechanical seal Non-Metallic Standardized Chemical Pump Type NP In PP / PE-UHMW / PVDF Dimensions to EN 22 / ISO 2 Applications Type NP standardized chemical pumps are the solution

More information

Side Channel Pumps Self-priming, segmental type with verly low NPSH

Side Channel Pumps Self-priming, segmental type with verly low NPSH Side Channel Pumps Self-priming, segmental type with verly low NPSH CEH Sizes 1201 6108, 1202/5 6108/5, 1202/7 6107/7 Technical data Capacity: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 1/min

More information