Shenzhen Alpha Inverter Co., Ltd. ALPHA6300V Series Special AC Drive for Tension Control

Transcription

1 ALPHA6300V Series Special AC Drive for Tension Control 1

2 Feature ALPHA6300V series special AC drive for tension control is a highly effective and multifunctional product. It is developed by ALPHA on basis of customer requirements with adequate market research. Coordinated with common synchronous motor, the tension control dedicated AC drive features low cost and superior control performance. It can replace torque motor, DC motor, magnetic clutch and other machines, so as to meet the special demands of subdivision market. For providing better product quality and production efficiency, the tension of the treated materials must be controlled during the production process of automated equipment, such as wire processing, papermaking, printing, packing, dyeing, steel rolling, and more. Tension control is embodied in all equipment running states including start, stop, acceleration, deceleration, high speed running, and low speed jogging. Technical Characteristics Dynamic control of torque and current can give a rapid response. Rich fault protection and operation-monitoring functions are provided. Multiple coil-diameter calculation functions are available. Coil diameter is calculated automatically. Built-in PID with multiple selection function provides flexible and fast close-loop feed-forward control. Output 180% high start torque at 0.1Hz. Dual power frequency can be freely switched. Taper tension is user-defined. Applications The special AC drive for tension control gives wide applications in the printing, packaging, and textile industries, such as the slitters, decatising machines, printing press, coating machines, laminators, wire drawing machines, jig dyeing machines, and the dyeing and finishing machinery, among others. Specification Technical Specifications of ALPHA6300V 2

3 Item Power Range Rated Input Voltage and Frequency AllowableInput Voltage Range Rated Output Voltage Max. Overload Current Control Method Frequency Range Frequency Accuracy Preset Frequency Resolution Output Frequency Resolution Preset Frequency Signal Acceleration-Deceleration Time Specification 380V ±20% three phases : from 0.75 to 500kW 380V three phases : 50/60Hz 380V three phases : from 304 to 456V, Voltage unbalance rate of less than 3%, Frequency fluctuation of below ±5% From 0 to rated input voltage G model: 150% for one minute, 180% for 20 seconds V/F control, Open loop vector control, Close loop vector control From 0.00 to Hz (from 3R75GB to 3004GB) From 0.00 to Hz (from 35R5GB to 3500G) Digital command ± 0.01 % (from-10 to +40 ) Simulation command ± 0.01 % (25 ±10 ) Digital command 0.01Hz Simulation command 1/1000 of the maximum frequency 0.01Hz From 0 to 10V, from 0 to 20mA From 0.1 to 3600 seconds (The acceleration and deceleration time are set individually.) Braking Torque The additional braking resistance reaches up to 125%. Voltage-Frequency Characteristics Protective Functions Ambient Temperature From-10 to +40 Humidity Four fixed V/F characteristics are optional, and any V/F characteristic can be preset. The V/F control with PG is offered. Over-voltage, under-voltage, current limit, over-current, overload, electronic thermal relay, overheating, over-voltage stall, load short circuit, grounding, under-voltage protection, input phase loss, output phase loss, short circuit to ground, interphase short circuit, motor overload protection, etc From 5 to 95% RH (No condensation) Storage Temperature From-40 to +70 Service Place Installation Site Vibration Protection Rating Indoor (without any corrosive gas) The altitude is at most1,000m. There is not any dust, corrosive gas, or direct solar radiation. Less than5.9m/s 2 (0.6g) IP20 3

4 Cooling Method Natural cooling or forced air cooling Selection Guide ALPHA6300V Selection Table Voltage Classes Model 380V Three Phases Motor Power (kw) 6300V-3R75GB V-31R5GB V-32R2GB V-3004GB V-35R5GB V-37R5GB V-3011GB V-3015GB V-3018G V-3022G V-3030G V-3037G V-3045G V-3055G V-3075G V-3093G V-3110G V-3132G V-3160G V-3185G V-3200G V-3220G V-3250G V-3280G V-3315G V-3355G V-3400G V-3500G Rated Output Current (A) 4

5 Overall Dimension ofalpha6300v Series Special AC Drivefor Tension Control Specifications H H1 W W1 D D1 D2 D3 d 6300V-3R75GB V-31R5GB 6300V-32R2GB V-3004GB 5

6 Specifications H H1 W W1 D D1 D2 d 6300V-35R5GB 6300V-37R5GB

7 Specifications H H1 W W1 D D1 D2 d d V-3011GB 6300V-3015GB V-3018G 6300V-3022G V-3030G 6300V-3037G V-3045G 6300V-3055G V-3075G 6300V-3093G V-3110G 6300V-3132G

8 Installation Size of 380V kW Three-Phase Standard Model with Base Specifications W1 W2 W3 H1 H2 D1 D2 D3 d 1 d V-3160G 6300V-3185G 6300V-3200G φ 14 4-φ V-3220G 6300V-3250G 6300V-3280G 6300V-3315G 6300V-3355G φ 14 4-φ 14 8

9 Installation Size of 380V kW Three-Phase Standard Model with Wall Mount Specifications W1 W2 H1 H2 D1 D2 D3 d V-3160G 6300V-3185G 6300V-3200G φ V-3220G 6300V-3250G 6300V-3280G 6300V-3315G 6300V-3355G φ 14 9

10 Installation Size of 380V kW Three-Phase Standard Model Specifications W1 W2 W3 H1 D1 D2 D3 d V-3400G 6300V-3500G φ 22 10

11 Installation Size of 380V kW Three-Phase Narrow-Body Model Specifications W W1 D H a b c d 6300V-3160G 6300V-3185G 6300V-3200G V-3220G 6300V-3250G 6300V-3280G 6300V-3315G 6300V-3355G

12 Specifications W D H a b c d 6300V-3400G 6300V-3500G